Universal AC input / Full range
Built-in active PFC function
High efficiency up to 90%
Protections: Short circuit / Overload / Over voltage
Protections: Over temperature (optional)
Built-in remote ON-OFF control
5 years warranty
Withstand 300VAC surge input for 5 seconds
Cooling by free air convection
1U low profile 38mm
No load power consumption<0.5W
All using 105 long life electrolytic capacitors
SPECIFICATION
HRP-100-3.3 HRP-100-5 HRP-100-7.5 HRP-100-12 HRP-100-15 HRP-100-24 HRP-100-36 HRP-100-48
MODEL
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
RIPPLE&NOISE(max.) Note.2
OUTPUT VOLTAGE ADJ.RANGE
VOLTAGETOLERANCE Note.3
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDUP TIME (Typ.)
VOLTAGERANGE Note.5
FREQUENCY RANGE
POWERFACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
ENVIRONMENT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
OVERTEMPERATURE
SAFETY STANDARDS
HARMONICCURRENT
EMICONDUCTION&RADIATION
SAFETY &
EMSIMMUNITY
EMC
(Note4)
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
WORKINGTEMP.
REMOTECONTROL
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVERVOLTAGE
PROTECTION
ACCURRENT (Typ.)
3.3V 5V 7.5V 12V 15V 24V 36V 48V
20A 17A 13.5A 8.5A 7A 4.5A 2.9A 2.2A
0~20A 0~17A 0~13.5A 0~8.5A 0~7A 0~4.5A 0~2.9A 0~2.2A
66W 85W 101.3W 102W 105W 108W 104.4W 105.6W
80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p
3.1~3.8V 4.75~5.8V 7.1~9V 11.4~13.8V 14.25~18V 22.8~28.8V 34.2~39.6V 45.6~55.2V
0.5% 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% 0.2%
2.0% 2.0% 1.5% 0.8% 0.8% 0.5% 0.5% 0.5%
2500ms,100ms/230VAC 2500ms,100ms/115VACatfullload
50ms/230VAC20ms/115VACatfullload
85~264VAC120~370VDC
47~63Hz
PF>0.95/230VACPF>0.98/115VACatfullload
78% 83%
6~7V 9.4~10.9V 14.4~16.8V 18.8~21.8V 30~34.8V 41.4~48.6V 57.6~67.2V
84% 87.5% 88% 88.5% 89% 90%
1.2A/115VAC0.6A/230VAC
35A/115VAC65A/230VAC
<1mA /240VAC
105~135%ratedoutputpower
Protectiontype:ConstantcurrentlimitingforVo=50~100%ofratedvoltage,recoversautomaticallyafterfaultconditionisremoved
3.96~4.62V
Protectiontype:Shutdowno/pvoltage,re-powerontorecover
Protectiontype: o/pvoltage,recoversautomaticallyaftertemperaturegoesdownShutdown
UL60950-1, TUVEN60950-1approved
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3
CompliancetoEN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2, heavyindustrylevel,criteria A
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC /25 /70%RH
-40~+60 (Refertooutputloadderatingcurve)
RC+/RC-:0~0.8V=poweron;4~10V=poweroff
20~90%RHnon-condensing
-40~+85 ,10~95%RH
0.04%/ (0~50
10~500Hz,5G10min./1cycle,60min.eachalongX, Y,Zaxes
295.7Khrsmin.MIL-HDBK-217F(25 )
159*97*38mm(L*W*H)
FileName:HRP-100-SPEC2010-11-29
Features :
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
HRP-100 series
100WSingleOutputwithPFCFunction
FUNCTION
0.38Kg;24pcs/10.1Kg/0.76CUFT
+2.5,-3.5% 2.5% 2.5% 1.5% 1.5% 1.5% 1.5% 1.5%
90 (3.3V~7.5V),85 (12V~48V)(TSW1:detectonheatsinkQ101ofpowertransistor)(optional)
http://store.iiic.cc/