High Voltage Resistors Film Resistors HighMetal Voltage High Voltage Metal Film Resistors MH Series Metal Film Resistors 60065 Approval for MH37 * BSEN Welwyn Components Welwyn Components MH Series MH Series in value range 680K to 3M High working voltage to 3.5KV *60065 Approval for MH37 * BSEN MH37 meets requirements of BSEN 60065 Small sizeto in value range 680K *range in value 680K 3M to 3M pulse working voltage to capability 3.5KV * Highvoltage * High High working toload 3.5kV Robust cement coating size Small size * * Small upcapability to 10M High pulse load capability load * Value * High pulse Robust cement coating cement coating * Robust Value up 10M uptoto 10M * Value All Pb-free parts comply with EU Directive 2011/65/EU amended by (EU) 2015/863 (RoHS3) Electrical Data MH25 Electrical Data Power rating at 70C max Resistance range watts 0.25 0.5 ohms 100K - 10M 100K - 3M MH25 volts dc or ac peak watts 0.25 volts ohms 100K - 10M ppm/C volts dc or ac peak 1,600 % volts Limiting element voltage Power rating at 70C max Isolation voltage Resistance range TCR Limiting element voltage Resistance tolerance Isolation voltage Standard values TCR Thermal impedance Resistance tolerance Ambient temperature range Standard values ppm/C % Thermal impedance 3,500 0.5 700 100K - 3M 100 3,500 1, 2, 5 700 E24 and E96 preferred 100 140 1, 2, 5 C 112 - 55 to 155 E24 and E96 preferred 140 112 C Physical Data MH37 1,600 C/watt C/watt Ambient temperature range MH37 - 55 to 155 Dimensions (mm) and Weight (g) Physical Data PCB Min mounting Bend Dimensions (mm) and Weight (g) Type L max D max f min d nom centres Radius PCB Min MH25 6.2 2.5 21.0 0.6 10.2 0.6 mounting Bend MH37 9.0 3.7 19.6 0.8 12.7 1.2 Type L max D max f min d nom centres Radius Wt.nom MH25 MH37 6.2 2.5 Construction 9.0 3.7 21.0 0.6 10.2 0.6 0.3 19.6 0.8 12.7 1.2 0.5 d Wt.nom D L 0.3 0.5 d D L f f Terminations Thin film material is sputtered on to high grade ceramic rods. Material Solder-coated copper wire. Nickel plated steel caps are force fitted and the termination Strength The terminations satisfy the requirements of Construction wires are welded to the caps. The value is obtained by Terminations a IECcopper 68.2.21. Thin film material is sputtered on to high grade ceramic rods. Material Solder-coated wire. helical cut in the film and finally the resistor body is protected Nickel plated steel caps are force fitted and the termination The terminations meet the requirements of by a cement protection applied so that the terminations Strength Solderability The terminations satisfy the requirements of wires are welded the caps. The IEC 115-1, Clause 4.17.3.2 remaintocompletely clear.value is obtained by a IEC 68.2.21. helical cut in the film and finally the resistor body is protected Solderability The terminations by a cementMarking protection applied so that the terminations Solvent resistancemeet the requirements of IEC 115-1, Clause 4.17.3.2 remain completely clear. The body protection and marking are resistant to all normal 1% tolerance resistors are colour coded with 5 bands. industrial cleaning fluids suitable for printed boards. 2% and 5% tolerance have 4. Band IEC 62 colours are used. Marking Solvent resistance 1% tolerance resistors are colour coded with 5 bands. 2% and 5% tolerance have 4. Band IEC 62 colours are used. The body protection and marking are resistant to all normal industrial cleaning fluids suitable for printed boards. General Note Welwyn Components reserves the right to make changes in product specification without notice or liability. All information is subject to Welwyn's own data and is considered accurate at time of going to print. General Note General Note (c) Welwyn Components Limited * Bedlington, Northumberland NE22 7AA, UK BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. Welwyn Components reserves make changes in product or liability. Telephone: +44the (0) right 1670to822181 * Facsimile: +44 (0) specification 1670 829465without * Email:notice info@welwyn-tt.com * Website: www.welwyn-tt.com All subject to TT Electronics'own owndata dataand and is is considered going to to print. Allinformation informationis is subject to Welwyn's consideredaccurate accurateatattime timeofof going print. (c) TT Welwyn Components Limited * Bedlington, Northumberland NE22 7AA, UK (c) Electronics plc A subsidiary of TT electronics plc Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com A subsidiary of www.ttelectronics.com/resistors TT electronics plc Issue E * 10.05 06.18 Issue E * 10.05 1 High Voltage High Voltage Metal Film Resistors Metal Film Resistors High Voltage High Voltage MH Series MH Series Metal Resistors MetalFilm Film Resistors MH Series MH Series Performance Data Performance Data Performance Data Load at rated voltage : 1000 hrs at 70C Load at rated voltage : 1000 hrs at 70C Derating from rated power at 70C Derating from rated power at 70C Overload Overload Load at rated voltage : 1000 hrs at 70C 56 days at DHSS 56 days at DHSS Derating from rated power at 70C Climatic Climatic Overloadcategory Climatic Climatic category 56 days at DHSS Temperature rapid change Temperature rapid change Climatic Resistance to solder heat Resistance to solder heat Climatic category Vibration and bump Vibration and bump Temperature V oltage proofrapid change Voltage proof Resistance to solder heat Welwyn Components Welwyn Components Welwyn Components R% R% Maximum Maximum 1.5 1.5 R% R% % RR% R% R% R% R% Max1i.m 0 um 1.0 11..55 1.5 1.5 1.5 1.0 R% R% R% R% R% R% vo Rl% ts volts R% 0.5 0.5 0.5 To ensure reliable performance high voltages should be taken to avoid potentialatsources of ionic care contamination be taken to avoid potential sources of ionic contamination contacting the resistor body, for example, flux applied by Application Notes contacting theencapsulation resistor body, materials for example, flux applied by spraying, or contaminants from the To ensure reliable performance at high voltages care should spraying, encapsulation materials or contaminants from the environment of use. be takenoftouse. avoid potential sources of ionic contamination environment contacting the resistor body, for example, flux applied by Packaging spraying, encapsulation materials or contaminants from the Packaging All MH series of resistors environment use. are supplied tape packed ready for All MH serieson resistors are supplied tapeand packed readymachines. for loading automatic sequencing insertion loading on automatic sequencing and insertion machines. 01.5 0.5 0.5 0.5 Vibration and bump R% Application Notes Application Notesperformance at high voltages care should To ensure reliable Voltage proof 01.5 Zero at 155C Zero at 155C Typical Typical 0.4 0.4 Ty0p .2ic5al 0.25 00..24 0.2 Zero at 155C 0.2 0.2 0 .25 55/155/56 55/155/56 00.0.25 0.05 00.0.25 0.05 55/155/56 0.05 0.05 0.05 700 min 700 min 0.05 0.5 0.05 volts 700 min Packaging Component wires will not protrude tape beyond the outside edge All MH series resistors are supplied packed ready for Component wires will not protrude beyond the outside edge of the tape. of theloading tape. on automatic sequencing and insertion machines. Alternative packing available by request. Component wires will not Alternative packing available byprotrude request. beyond the outside edge of the tape. Lead Formed Resistors can also be supplied. Standard options Leadof Formed canGoal also be supplied. Standard options Lancet,Resistors Radial and Post are shown in the Alternative packing available by forming request. of Lancet, Radial and Goal Post forming are shown in the Lead Form information sheet. Lead Form information sheet. Lead Formed Resistors can also be supplied. Standard options of Lancet, Radial and Goal Post forming are shown in the Lead Form information sheet. Ordering Procedure Ordering Procedure 6 6 52 6 52 6 56 52 f1 6 5 5 f2 f1 f2 Body Location f1 - f2 1.4 mm Body Location f1 - f2 1.4 mm f1 f2 Body Location f1 - f2 1.4 mm Example: MH25 at 4.7 megohms and 1% tolerance in ammo pack box of 5000 pieces - Example: MH25 at 4.7 megohms and 1% tolerance in ammo pack box of 5000 pieces - Ordering Procedure MH25- 4M7FI MH25- 4M7FI Example: Type MH25 at 4.7 megohms and 1% tolerance in ammo pack box of 5000 pieces - Type MH25- 4M7FI Value (use IEC62 code) Value (use IEC62 code) Type Tolerance (use IEC62 code) Tolerance F 1%(use IEC62 code) (use IEC62 code) F Value 1% G 2% J2% 5% Tolerance (use IEC62 code) 5% F 1% Packing G 2% Packing MH25 5000/box J I 5% AmmoMH25 Standard MH37 5000/box 2500/boxStandard I Ammo MH37 2500/box G J Packing (c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK MH25 5000/box I Components Ammo Standard (c) Welwyn Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com General Note MH37 2500/box BI Technologies 192 Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com TT Electronics reserves the right to make changes in product specification without notice or liability. 192 All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 (c) TT Electronics plc 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com 192 Issue E * 10.05 IRC Issue E * Welwyn 10.05 www.ttelectronics.com/resistors Issue E * 10.05 06.18