© Digital View Group Ltd 2009
Part No: 4169600xx-3
SVH-1920
The SVH-1920 is a fully buffered mult-sync interface controller for providing analog and digital connection for a wide range of TFT LCD
panels up to WUXGA resolution. Featuring full screen image expansion of lower resolutions, image ip and invert functions and onscreen
PIP functions, the SVH-1920 also supports an optional High-Denition Serial Digital Interface (HD-SDI) adaptor for professional and
broadcast video applications. The SVH-1920 is part of Digital View’s “Professional Class” video controller family featuring advanced
capabilities, support and custom development paths for OEM clients.
RELIABILITY
Calculated Mean Time Between Failures
In excess of 100,000 hours. Warranty: 3 years.
CUSTOM ENGINEERING SERVICES
Custom input timing, panel timing, splash screen, OSD Menu,
conformal coatings, layouts etc.
OPTIONS
HD-SDI Daughter board, Infra-Red Remote handset, 2W per
channel Audio Amplier.
The Digital View SVH-1920 interface controller for high-denition, large format professional monitor applications.
FEATURES
Colors: Up to 8 bit per color,
ie 16.7 Million colors.
Functions : On Screen Display (OSD) menu.
Function Controls: External buttons, Infra-Red controls,
Serial Port control.
Image Scaling : Up/Down scaling to t input to panel
format.
Image Control : Auto conguration, Brightness,
Contrast, Clock, Phase, Color
temperature, Image position,
Saturation, Hue, Gamma.
Other Features : System Information, OSD position,
Scaling to ll screen and ll to aspect
ratio, OSD timeout, Factory reset, OSD
menu transparency, Horizontal &
Vertical image inversion, Picture in
Picture - variable position, any input
combination (3 sizes), Programmable
hot keys, Serial port protocol, Ambient
light sensor.
Power Requirements : +12VDC / +24VDC ±5%,10W (controller
only)
Panel Power : Supports 3.3V, 5V, 12V & 18V panels.
Panel Signal : Dual channel TTL & LVDS support.
Inverter Support : DPMS Enable pin (3.3V or 5V)
Plug & Play : DDC 1,2/b compatible
Status Indicator : Dual Color LED support.
PANEL CONNECTIVITY
TFT : 1920x1200 1440x900 1024x768
1920x1080 1366x768 800x480
1680x1050 1280x1024 800x600
1600x1200 1280x768 640x480
INPUT
Analog RGB: 60Hz at WUXGA, UXGA
75Hz at SXGA, WXGA, XGA, SVGA, VGA
With auto detect of Digital Separate Sync, Sync-
On-Green & Composite Sync. Auto detects VGA-
WUXGA, interlaced & non-interlaced
DVI-D / HDMI: 60Hz atWUXGA
60Hz atUXGA
75Hz at SXGA, WXGA, XGA, SVGA, VGA
Video: NTSC / PAL / SECAM (Interlaced)
Composite Video S-video
SD Component (YCbCr)
HD Component (YPbPr)
© Digital View Group Ltd 2009
Part No: 4169600xx-3
ACCESSORIES
416013310/20-3: HD-SDI Adaptor (HD-1000 / HD2000)
Kit 60110-3 OSD Button Board
Kit 60121- 3 OSD Membrane Kit
Kit 60125- 3 OSD Membrane Kit
416040010-3 Inverter Interface board
416940020-3 Audio Amplier
559000104-3 IR Remote Control
AVAILABLE DOCUMENTATION
Instruction Manual
Revision Control Documentation**
Firmware Upgrade Manual**
MTBF Analysis**
Mechanical Drawing
CONNECTOR DEFINITIONS
120.4mm [4.74]
179.1mm [7.05]
16mm [.630]
CN2 TTL Panel Signal
CN3 TTL Panel Signal
CN4 TTL Panel Signal
CN5 Alternate HDMI connector
CN7 Audio board connector
CN8 RS-232 serial control
CN9 Ambient light sensor connector
CNA1 Auxiliary power output
CNA2 Auxiliary +5VDC output
CNB1 Backlight inverter
CNC1 OSD controls
CNV1 Alternate Video-In
CNV2 Component Video-In
CNV5 Auxiliary Video-In
J1 S-Video In
J2 Composite Video-In
J3 Panel Signal for LVDS Panel
J4 HD-SDI adaptor board interface
IR1 Infra-Red sensor connector
LED1 Dual color LED connector
P1 VGA Analog input
P2 DVI-D input
PP2/PP3 Power input (Alternate)
PP4 External panel power input
PP5 Power input
ASIA
Digital View Ltd.
16th Floor Millennium City 3
370 Kwun Tong Road
Kwun Tong, Hong Kong
Tel : (852) 2861-3615
USA
Digital View Inc.
18440 Technology Drive
Morgan Hill, CA 95037,
USA
Tel : +1 (408) 782-7773
EUROPE
Digital View Limited
6 Marylebone Passage
London, W1W 8EX
UK
Tel : +44 (0) 20-7631-2150
Ready-made 3D drawing les
File Type: SLDPRT
Save time and effort for your system volumetric
analysis design. Includes jpg le previews.
http://www.digitalview.com/controllers/products.php
MECHANICAL DRAWING
Dimensions: 179mm x 120.4mm (7” x 4.74”)
Form Factor: DV standard & mounting holes
** Available upon request.