For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 1
HMC665LP4 / 665LP4E
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
v00.0508
General Description
Features
Functional Diagram
The HMC665LP4E is a highly integrated converter IC
that operates from 0.7 to 1.2 GHz for both up-conversion
and downconversion applications. The HMC665LP4E
incorporates a high dynamic range, passive double-
balanced mixer core with integrated LO and IF
ampliers, making it ideal for compact transceiver
applications in GSM, WCDMA, TD-SCDMA, WiBro
and WiMAX. This versatile converter RFIC operates
with a low LO input power level of only -3 dBm,
provides up to 10 dB conversion gain, and exhibits
+23 dBm Input IP3 in downconversion mode. This RFIC
provides up to 11 dB conversion gain in upconverter
mode. Specic evaluation boards are available for
both upconverter and downconverter modes.
High Input IP3: +23 dBm
Low Input LO Drive: -3 to +6 dBm
High LO to RF Isolation: 36 dB
High Conversion Gain: 10 dB
Ideal for Upconversion or Downconversion
24 Lead 4x4mm SMT Package: 16mm2
Electrical Specications, TA = +25° C, LO = 0 dBm, VccLO= VddIF = +5V
Typical Applications
The HMC665LP4 / HMC665LP4E is ideal for:
• Cellular/3G & WiMAX/LTE/4G Infrastructure
• Base Stations & Repeaters
• Broadband & Fixed Wireless
• Access Points
• Test & Measurement Equipment
Parameter Min. Typ. Max. Units
Frequency Range, RF, LO 0.7 - 1.2 GHz
Frequency Range, IF 250 - 450 MHz
Conversion Gain 7 10 dB
Noise Figure (SSB) 10 dB
LO to RF Isolation 32 36 dB
LO to IF Isolation 1 dB
IP3 (Input) 23 dBm
1 dB Compression (Input) 10 dBm
LO Drive Input Level (Typical) -3 to +6 dBm
Supply Current (IddIF + IccLO) 150 200 mA
*Unless otherwise noted, all measurements performed as a downconverter and congured as shown in the downconverter mode application
circuit, IF=250 MHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 2
Conversion Gain vs.
LO Drive, IF = 250 MHz
Input IP2 vs. LO Drive, IF = 450 MHz Input IP2 vs. Temperature, IF = 450 MHz
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Downconversion Plots
Conversion Gain vs.
LO Drive, IF = 450 MHz
Conversion Gain vs.
Temperature, IF = 250 MHz
Conversion Gain vs.
Temperature, IF = 450 MHz
-15
-10
-5
0
5
10
15
500 700 900 1100 1300 1500
LO= -3 dBm
LO= 0 dBm
LO= 3 dBm
LO= 6 dBm
CONVERSION GAIN (dB)
FREQUENCY (MHz)
-15
-10
-5
0
5
10
15
500 700 900 1100 1300 1500
LO= -3 dBm
LO= 0 dBm
LO= 3 dBm
LO= 6 dBm
CONVERSION GAIN (dB)
FREQUENCY (MHz)
-20
-15
-10
-5
0
5
10
15
20
500 700 900 1100 1300 1500
+25C
+85C
-40C
CONVERSION GAIN (dB)
FREQUENCY (MHz)
-20
-15
-10
-5
0
5
10
15
20
500 700 900 1100 1300 1500
+25C
+85C
-40C
CONVERSION GAIN (dB)
FREQUENCY (MHz)
30
40
50
60
70
80
90
500 700 900 1100 1300
-3 dBm
0 dBm
+3 dBm
+6 dBm
IP2 (dBm)
RF FREQUENCY (MHz)
30
40
50
60
70
80
90
500 700 900 1100 1300
+25C
+85C
-40C
IP2 (dBm)
RF FREQUENCY (MHz)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 3
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Downconversion Plots
Input P1dB vs. Temperature, IF = 350 MHz
Input IP3 vs. LO Drive, IF = 450 MHz Input IP3 vs. Temperature, IF = 450 MHz
Upconversion Plots
Conversion Gain vs.
LO Drive, IF = 250 MHz
Conversion Gain vs.
LO Drive, IF = 450 MHz
0
5
10
15
20
25
30
500 700 900 1100 1300
-3 dBm
0 dBm
+3 dBm
+6 dBm
IP3 (dBm)
RF FREQUENCY (MHz)
0
5
10
15
20
25
30
500 700 900 1100 1300
+25C
+85C
-40C
IP3 (dBm)
RF FREQUENCY (MHz)
-15
-10
-5
0
5
10
15
650 825 1000 1175 1350
LO= -3 dBm
LO= 0 dBm
LO= 3 dBm
LO= 6 dBm
CONVERSION GAIN (dB)
FREQUENCY (MHz)
-15
-10
-5
0
5
10
15
650 825 1000 1175 1350
LO= -3 dBm
LO= 0 dBm
LO= 3 dBm
LO= 6 dBm
CONVERSION GAIN (dB)
FREQUENCY (MHz)
4
7
10
13
16
500 700 900 1100 1300
+25C
+85C
-40C
P1dB (dBm)
RF FREQUENCY (MHz)
Isolation vs. Frequency
-40
-30
-20
-10
0
10
500 700 900 1100 1300 1500 1700
RF to IF
LO to RF
LO to IF
ISOLATION (dB)
FREQUENCY (MHz)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 4
Input IP2 vs. LO Drive, IF = 450 MHz Input IP3 vs. LO Drive, IF = 450 MHz
30
40
50
60
70
80
90
650 800 950 1100 1250
LO = -3 dBm
LO = 0 dBm
LO = 3 dBm
LO = 6 dBm
IP2 (dBm)
RF FREQUENCY (MHz)
-15
-10
-5
0
5
10
15
20
650 800 950 1100 1250
-3 dBm
0 dBm
+3 dBm
+6 dBm
IP3 (dBm)
RF FREQUENCY (MHz)
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
IF Bandwidth Return Loss
-35
-30
-25
-20
-15
-10
-5
0
5
10
200 300 400 500 600
Conversion Gain
Return Loss
RESPONSE (dB)
IF FREQUENCY (MHz)
-30
-25
-20
-15
-10
-5
0
0 0.5 1 1.5 2 2.5 3
RF
LO
RETURN LOSS (dB)
FREQUENCY (MHz)
Harmonics of LOMxN Spurious @ IF Port
nLO Spur at RF Port
LO Freq. (GHz) 1 2 3 4
0.5 31 32 32 39
0.6 28 23 32 47
0.7 30 21 30 44
0.8 37 21 32 47
0.9 38 23 37 53
1.0 35 24 40 43
1.2 34 27 33 55
1.4 35 32 33 58
1.6 36 38 46 62.6
LO = 0 dBm
Values in dBc below input LO level measured at RF port.
nLO
mRF 0 1 2 3 4
0 xx 3 21 29 58
1 7 0 33 52 59
2 66 56 50 65 84
3 91 84 73 77 91
4 91 91 91 91 91
All values in dBc below IF power level (1RF - 1LO)
Typical Supply Current
VddIF + VccLO IddIF + IccLO
+4.5 130 mA
+5.0 150 mA
+5.5 165 mA
Absolute Maximum Ratings
RF / MIX IF Input (VddIF = +5V) +22 dBm
LO Input (VccLO = +5V) +10 dBm
IFIN +15 dBm
VccLO +7 Vdc
VddIF +8 Vdc
Junction Temperature 150 °C
Continuous Pdiss (T = 85°C)
(derate 14.9 mW/°C above 85°C) 0.97 W
Thermal Resistance (junction to ground paddle) 67.2 °C/W
Storage Temperature -65 to +150°C
Operating Temperature -40 to +85°C
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 5
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Typical Performance Cascade Analysis HMC665LP4E Downconverter Mode
(RF Input = 700 to 1200 MHz, IF Output = 250 to 450 MHz, LO = Low Side or High Side)
Component Level Cumulative MCM Performance
Description Gain
(dB)
NF
(dB)
OIP3
(dBm)
OP1dB
(dBm)
+5V
Current (mA)
Gain
(dB)
NF
(dB)
OIP3
(dBm)
IIP3
(dBm)
OP1dB
(dBm)
IP1dB
(dBm)
Mixer w/ LO Amplier -8.0 8.5 15.0 7.0 57.0 -8.0 8.5 15.0 23.0 7.0 16.0
IF Amplier 18.0 1.0 37.5 21.0 93.0 10.0 9.4 31.7 21.7 19.5 10.5
HMC665LP4E Cumulative MCM Performance 150.0 10.0 9.4 31.7 21.7 19.5 10.5
* RF image rejection lter is not included in the released eval boards.
Typical Performance Cascade Analysis HMC665LP4E Upconverter Mode
(RF Output = 700 to 1200 MHz, IF Input = 250 to 450 MHz, LO = Low Side or High Side)
Component Level Cumulative MCM Performance
Description Gain
(dB)
NF
(dB)
OIP3
(dBm)
OP1dB
(dBm)
+5V
Current (mA)
Gain
(dB)
NF
(dB)
OIP3
(dBm)
IIP3
(dBm)
OP1dB
(dBm)
IP1dB
(dBm)
IF Amplier 18.0 1.0 38 21.0 93.0 18.0 1.0 38 20 21.0 4.0
Mixer w/ LO Amplier -7.5 8.5 21 7.0 57.0 10.0 1.3 20.5 10 7.0 -3.0
HMC665LP4E Cumulative MCM Performance 150.0 10.0 1.3 20.5 10 7.0 -3.0
* IF image rejection lter is not included in the released eval boards.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 6
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC665LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H665
XXXX
HMC665LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H665
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 2, 4, 5, 6, 8, 11, 14,
15, 19, 20, 22 - 24 N/C No connection. These pins may be connected to
RF ground. Performance will not be affected.
3 RF This pin is DC coupled and
matched to 50 Ohms.
7 IFIN This pin is matched to 50 Ohms with a 56nH inductor to
ground. See Application Circuit.
9 CAP
AC ground. An external capacitor of 0.01 µF to ground is
required for low frequency bypassing. See application circuit
for further details.
10 MIXIF
This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to
pass the necessary IF frequency range. For operation to DC,
this pin must not source/sink more than 18 mA of current or
part non-function and possible part failure will result.
12 IFOUT This pin is AC coupled and
matched to 50 Ohms.
13 VddIF
Power supply for IF amplier. Choke
inductor and bypass capacitor are required.
See application circuit.
16 MIXLO This pin is DC coupled and matched to 50 Ohms.
An off chip DC blocking capacitor is required.
17 GND Backside of package has exposed metal ground
paddle that must also be connected to ground.
18 VccLO
Power supply and RF Output of the LO
amplier. Three external bypass capacitors
are recommended for optimum performance,
as illustrated in the application circuit.
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 7
Pin Descriptions (Continued)
Pin Number Function Description Interface Schematic
21 LO
This pin is DC coupled and matched to 50 Ohms.
An off chip DC blocking capacitor is required.
See application circuit.
Evaluation PCB - Upconverter Mode
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
Item Description
J1 - J3 PCB Mount SMA RF Connector
J4 2mm DC Header
C1, C2, C3 100 pF Chip Capacitor, 0402 Pkg.
C4, C6 1000 pF Chip Capacitor, 0603 Pkg.
C5, C7 2.2 µF Capacitor, Tantalum
C8 0.01 µF Chip Capacitor, 0402 Pkg.
L1, L2 56 nH Chip Inductor, 0402 Pkg.
L3 36 nH Chip Inductor, 0603 Pkg.
R1, R3, R4 0 Ohm Resistor, 0402 Pkg.
R5 24 Ohm Resistor, 1210 Pkg.
U1 HMC665LP4(E) - Mixer
PCB [2] 119242 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR
List of Materials for Evaluation PCB 122009 [1]
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 8
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Evaluation PCB - Downconverter Mode
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
Item Description
J1 - J3 PCB Mount SMA RF Connector
J4 2mm DC Header
C1, C2, C3 100 pF Chip Capacitor, 0402 Pkg.
C4, C6 1000 pF Chip Capacitor, 0603 Pkg.
C5, C7 2.2 µF Capacitor, Tantalum
C8 0.01 µF Chip Capacitor, 0402 Pkg.
L1, L2 56 nH Chip Inductor, 0402 Pkg.
L3 36 nH Chip Inductor, 0603 Pkg.
R2, R3, R4 0 Ohm Resistor, 0402 Pkg.
R5 24 Ohm Resistor, 1210 Pkg.
U1 HMC665LP4(E) - Mixer
PCB [2] 119242 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR
List of Materials for Evaluation PCB 122010 [1]
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 9
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Application Circuit - Upconverter Mode
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
MIXERS - HIGH IP3 - SMT
10
10 - 10
HMC665LP4 / 665LP4E
v00.0508
GaAs MMIC MIXER w/ INTEGRATED
IF & LO AMPLIFIER, 0.7 - 1.2 GHz
Application Circuit - Downconverter Mode
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
