DATA SHEET
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
PHOTOCOUPLER
PS2801-1,PS2801-4
HIGH ISOLATION VOLTAGE
SSOP PHOTOCOUPLER −NEPOC Series−
Document No. PN10251EJ03V0DS (3rd edition)
Date Published March 2006 CP(K)
Printed in Japan
The mark shows major revised points.
DESCRIPTION
The PS2801-1 and PS2801-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN
silicon phototransistor in a plastic SSOP for high density applications.
This package has shield effect to cut off ambient light.
FEATURES
• High isolation voltage (BV = 2 500 Vr.m.s.)
• Small and thin package (4,16-pin SSOP, Pin pitch 1.27 mm)
• High collector to emitter voltage (VCEO = 80 V)
• High-speed switching (tr = 3
µ
s TYP., tf = 5
µ
s TYP.)
• Ordering number of tape product: PS2801-1-F3, F4, PS2801-4-F3, F4
• Pb-Free product
• Safety standards: PS2801-1, -4
• UL approved: File No. E72422
• BSI approved: No. 8188, 8189
• CSA approved: File No. CA 101391
• DIN EN60747-5-2 (VDE0884 Part2) approved (Option)
APPLICATIONS
• Programmable logic controllers
• Measuring instruments
• Power supply
• Hybrid IC
1. Anode
2. Cathode
3. Emitter
4. Collector
43
12
Anode
Cathode
Emitter
Collector
1. 3. 5. 7.
2. 4. 6. 8.
9. 11. 13. 15.
10. 12. 14. 16.
12345678
16 15 1413 12 11 10 9
(Top View)
PIN CONNECTION
PS2801-1
PS2801-4
NEC Compound Semiconductor Devices, Ltd. 1991, 2006
Data Sheet PN10251EJ03V0DS
2
PS2801-1,PS2801-4
PACKAGE DIMENSIONS (UNIT: mm)
M
0.12
0.4±0.1
1.27
2.0±0.1
0.1±0.1
PS2801-1 PS2801-4
4.4
7.0±0.3
0.5±0.3
0.15+0.10
–0.05
2.7±0.3 10.3±0.3
4.4
7.0±0.3
0.5±0.3
0.15+0.10
–0.05
1.27
2.0
+0.3
–0.2
0.1±0.1
M
0.12
0.40
+0.10
–0.05
MARKING EXAMPLE
Assembly Lot
4 01
Week Assembled
Last number of type No. : 1
PS2801-1
Country Assembled
Type Number
Assembly Lot
No. 1 pin
Mark
PS2801-4
PS2801-4
NL401
Year Assembled
(Last 1 Digit)
1401
*1
*1 : Pb-Free
401
Year Assembled
(Last 1 Digit)
LN
Rank Code
In-house Code
(L: Pb-Free)
Week Assembled
Data Sheet PN10251EJ03V0DS 3
PS2801-1,PS2801-4
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval
Application
Part Number*1
PS2801-1 PS2801-1-A Pb-Free 50 pcs (Tape 50 pcs cut) Standard products PS2801-1
PS2801-1-F3 PS2801-1-F3-A
Embossed Tape 3 500 pcs/reel (UL, BSI, CSA
PS2801-1-F4 PS2801-1-F4-A
approved)
PS2801-1-V PS2801-1-V-A
50 pcs (Tape 50 pcs cut) DIN EN60747-5-2
PS2801-1-V-F3 PS2801-1-V-F3-A
Embossed Tape 3 500 pcs/reel (VDE0884 Part2)
PS2801-1-V-F4 PS2801-1-V-F4-A
Approved (Option)
PS2801-4 PS2801-4-A
Magazine Case 45 pcs Standard products PS2801-4
PS2801-4-F3 PS2801-4-F3-A
Embossed Tape 2 500 pcs/reel (UL, BSI, CSA
PS2801-4-F4 PS2801-4-F4-A
approved)
PS2801-4-V PS2801-4-V-A
Magazine Case 45 pcs DIN EN60747-5-2
PS2801-4-V-F3 PS2801-4-V-F3-A
Embossed Tape 2 500 pcs/reel (VDE0884 Part2)
PS2801-4-V-F4 PS2801-4-V-F4-A
Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10251EJ03V0DS
4
PS2801-1,PS2801-4
ABSOLUTE MAXIMUM RATINGS (Unless otherwise specified, TA = 25°C)
Parameter Symbol Ratings Unit
PS2801-1 PS2801-4
Diode Forward Current (DC) IF 50 mA/ch
Reverse Voltage VR 6 V
Power Dissipation Derating
∆
PD/°C 0.6 0.8 mW/°C
Power Dissipation PD 60 80 mW/ch
Peak Forward Current *1 IFP 1 A/ch
Transistor Collector to Emitter Voltage VCEO 80 V
Emitter to Collector Voltage VECO 6 V
Collector Current IC 50 mA/ch
Power Dissipation Derating
∆
PC/°C 1.2 mW/°C
Power Dissipation PC 120 mW/ch
Isolation Voltage *2 BV 2 500 Vr.m.s.
Operating Ambient Temperature TA −55 to +100 °C
Storage Temperature Tstg −55 to +150 °C
*1 PW = 100
µ
s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together (PS2801-1).
Pins 1-8 shorted together, 9-16 shorted together (PS2801-4).
Data Sheet PN10251EJ03V0DS 5
PS2801-1,PS2801-4
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 5 mA 1.1 1.4 V
Reverse Current IR VR = 5 V 5
µ
A
Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 15 pF
Transistor Collector to Emitter Dark
Current
ICEO VCE = 80 V, IF = 0 mA 100 nA
Coupled Current Transfer Ratio
(IC/IF) *1
CTR IF = 5 mA, VCE = 5 V 80 600 %
Collector Saturation
Voltage
VCE(sat) IF = 10 mA, IC = 2 mA 0.3 V
Isolation Resistance RI-O VI-O = 1.0 kVDC 1011 Ω
Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.4 pF
Rise Time *2 tr VCC = 5 V, IC = 2 mA, RL = 100 Ω 3
µ
s
Fall Time *2 tf 5
*1 CTR rank (PS2801-1 only)
K : 300 to 600 (%)
P : 150 to 300 (%)
L : 100 to 300 (%)
N : 80 to 600 (%)
*2 Test circuit for switching time
V
CC
V
OUT
R
L
= 100 Ω
I
F
50 Ω
Pulse Input
PW = 100 s
Duty Cycle = 1/10
µ
Data Sheet PN10251EJ03V0DS
6
PS2801-1,PS2801-4
TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = 25°C)
0
25
50
100
75
75 100
25 50
Ambient Temperature TA (˚C)
Diode Power Dissipation PD (mW)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
PS2801-4
PS2801-1
0.6 mW/˚C
0.8 mW/˚C
PS2801-1
PS2801-4 1.2 mW/˚C
100
50 75
250
200
50
150
100
Ambient Temperature TA ( ˚C)
Transistor Power Dissipation PC (mW)
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
0˚C
–25˚C
–55˚C
TA = +100˚C
+60˚C
+25˚C
50
100
0.1
5
1
10
0.5
0.7 0.9 1.1 1.40.8 1.0 1.2 1.3 1.5
Forward Voltage VF (V)
Forward Current IF (mA)
FORWARD CURRENT vs.
FORWARD VOLTAGE
I
F
= 5 mA
50 mA
10 mA
20 mA
70
0
50
60
30
40
10
20
428610
Collector to Emitter Voltage VCE (V)
Collector Current IC (mA)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
100
10 000
1 000
10
1
–50 –25 0 100
25 50 75
Ambient Temperature TA (˚C)
Collector to Emitter Dark Current ICEO (nA)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
VCE = 80 V
40 V
24 V
10 V
5 V
I
F
= 1 mA
50 mA
20 mA
10 mA
5 mA
2 mA
1
10
40
5
0.5
0.100.2 1.00.4 0.6 0.8
Collector Saturation Voltage VCE(sat) (V)
Collector Current IC (mA)
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
Remark The graphs indicate nominal characteristics.
Data Sheet PN10251EJ03V0DS 7
PS2801-1,PS2801-4
FREQUENCY RESPONSE
Frequency f (kHz)
Normalized Gain Gv
–10
–20
–15
0
–5
0.5 2 10 20 500
15 50 100 200
I
F
= 5 mA,
V
CE
= 5 V
R
L
= 1 kΩ100 Ω
300 Ω
TYP.
I
F
= 5 mA
T
A
= 25˚C
I
F
= 20 mA
T
A
= 25˚C
I
F
= 5 mA
T
A
= 60˚C
LONG TERM CTR DEGRADATION
Time (Hr)
CTR (Relative Value)
0.6
1.2
0.0
1.0
0.8
0.2
0.4
10
2
10
3
10
4
10
5
10
Normalized to 1.0
at T
A
= 25˚C,
I
F
= 5 mA, V
CE
= 5 V
–50 0100
–25 25 50 75
0.0
0.6
1.2
0.2
0.4
1.0
0.8
Ambient Temperature T
A
(˚C)
Normalized Current Transfer Ratio CTR
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
t
f
t
s
t
r
t
d
V
CC
= 5 V,
I
C
= 2 mA,
CTR = 236%
0.01 0.05 0.1 0.5 15
10
0.1
100
50
10
5
1
0.5
Switching Time t ( s)
µ
Load Resistance R
L
(kΩ)
SWITCHING TIME vs.
LOAD RESISTANCE
V
CC
= 5 V,
I
F
= 5 mA,
CTR = 236%
0.1 1 10 100
1
0.1
10
100
1 000
Load Resistance R
L
(kΩ)
SWITCHING TIME vs.
LOAD RESISTANCE
Switching Time t ( s)
µ
t
f
t
s
t
r
t
d
0.02 1000.1 1.0 10
100
200
50
150
250
300
Forward Current I
F
(mA)
Current Transfer Ratio CTR (%)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
V
CE
= 5 V,
n = 3
Sample A
B
C
Remark The graphs indicate nominal characteristics.
Data Sheet PN10251EJ03V0DS
8
PS2801-1,PS2801-4
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Reel)
Packing: 3 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
Tape Direction
PS2801-1-F3 PS2801-1-F4
1401
1401
1401
1401
1401
1401
1401
1401
1401
1401
Outline and Dimensions (Tape)
1.55±0.1
4.0±0.1
2.0±0.1
4.0±0.1
1.75±0.1
2.8 MAX.
7.55±0.1
0.3
7.5±0.1
16.0±0.3
2.85±0.1 2.3±0.1
1.5
+0.1
–0
φ
330±2.0
φ
100±1.0
φ
2.0±0.5
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0
Data Sheet PN10251EJ03V0DS 9
PS2801-1,PS2801-4
Tape Direction
PS2801-4-F3 PS2801-4-F4
Outline and Dimensions (Reel)
Packing: 2 500 pcs/reel
2.0±0.5
R 1.0
13.0±0.2
φ
21.0±0.8
φ
Outline and Dimensions (Tape)
1.55±0.1
12.0±0.1
2.0±0.1
4.0±0.1
1.75±0.1
16.0±0.3
8.3±0.1
2.8 MAX.
10.7±0.1
0.3
2.3±0.1
7.5±0.1
1.5
+0.1
–0
φ
330±2.0
φ
100±1.0
φ
2.0±0.5
15.9 to 19.4
Outer edge of
flange
21.5±1.0
17.5±1.0
Data Sheet PN10251EJ03V0DS
10
PS2801-1,PS2801-4
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220˚C
180˚C
Package Surface Temperature T (˚C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260˚C MAX.
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
Data Sheet PN10251EJ03V0DS 11
PS2801-1,PS2801-4
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10251EJ03V0DS
12
PS2801-1,PS2801-4
PROGRAMMABLE LOGIC CONTROLLERS EXAMPLE
Purpose: In-out interface
COM
PS2801–1
PS2801–4 MTGPG
AC.DC
Servo Motor
Driver Unit
Pulse Motor
Driver Unit M
Pulse Generator
Heater
Controller
Motor
Controller
Amplifier
Sensor
Xaxis
Yaxis
Servo
Motor
Servo
Motor
Controller
Programmable Logic
Controller
Controller
Computer
CRT
PC
Printer
Terminal
Terminal
Printer
FDD
PD4050
Power Supply
Memory
Cassette
Data Sheet PN10251EJ03V0DS 13
PS2801-1,PS2801-4
When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority
having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license.
M8E 00. 4 - 0110
The information in this document is current as of March, 2006. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
•
•
•
•
•
•
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general)
Hong Kong Head Office
Taipei Branch Office
Korea Branch Office
TEL: +852-3107-7303
TEL: +886-2-8712-0478
TEL: +82-2-558-2120
FAX: +852-3107-7309
FAX: +886-2-2545-3859
FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH http://www.ee.nec.de/
TEL: +49-211-6503-0 FAX: +49-211-6503-1327
California Eastern Laboratories, Inc. http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
0504
NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/
E-mail: salesinfo@ml.ncsd.necel.com (sales and general)
techinfo@ml.ncsd.necel.com (technical)
Sales Division TEL: +81-44-435-1573 FAX: +81-44-435-1579
For further information, please contact
PS2801-1,PS2801-4
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
