Chip Inductors (Chip Coils)
O05E.pdf
Apr.28,2017
EU RoHS Compliant
F**2&#.0-"3!21',2&'1!2*-%!-+.*7
5'2&-@
F-'12-.#,'0#!2'4#
|z{{GG-,2&##120'!2'-,-$2&#
1#-$#02',80"-313 12,!#1',
*#!20'!*,"*#!20-,'!/3'.+#,2@
FFor+-0#"#2'*1A.*#1#0#$#r2o-ur5#
.%#A3021..0-!&$-0-
H&22.BGG555@+302@!-+G#,-
#3G13..-02G!-+.*',!#G0-&1J@
Because of the difference of measurement condition, electrical characteristics plots on this catalog may have some difference to official specification value.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Contents
Product Guide p2
Please check the MURATA website (http://www.murata.com/)
if you cannot find a part number in this catalog.
Product specifications are as of November 2016.
Product Detail p422
!Caution/Notice p427
Soldering and Mounting p428
Packaging p430
TOKO Products
Inductors for General Circuits
Part Numbering p200
Product Detail p201
!Caution/Notice p292
Soldering and Mounting p294
Packaging p298
RF Inductors
Part Numbering p164
Product Detail p165
!Caution/Notice p190
Soldering and Mounting p192
Packaging p196
Inductors for General Circuits
Part Numbering p8
Product Detail p10
!Caution/Notice p151
Soldering and Mounting p153
Packaging p158
Inductors for Power Lines
Product Detail p302
!Caution/Notice p415
Soldering and Mounting p416
Packaging p419
TOKO Products
Inductors for Power Lines
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Product Guide
LQM18FN_00
LQM18PN_B0
LQM18PN_C0
LQM18PN_D0
LQM18PN_DH
LQM18PN_F0
LQM18PN_FH
LQM18PN_FR
LQM18PN_GH
LQM18PW_CH
LQM21DN_00
LQM21FN_00
LQM21FN_70
LQM21FN_80
LQM21PN_C0
LQM21PN_CA
LQM21PN_CH
LQM21PN_EH
LQM21PN_G0
LQM21PN_GC
LQM21PN_GH
LQM21PN_GR
LQM21PN_GS
LQM2MPN_DH
LQM2MPN_EH
LQM2MPN_G0
LQM2MPN_GH
LQM2HPN_CH
LQM2HPN_E0
LQM2HPN_EH
LQM2HPN_G0
LQM2HPN_GC
LQM2HPN_GH
LQM2HPN_GS
LQM2HPN_J0
LQM2HPN_JH
LQM31PN_00
LQM32PN_G0
LQM32PN_GC
LQW15CN_00
LQW15CN_10
LQW18CN_00
LQH2MCN_02
LQH2MCN_52
LQH2MPN_GR
LQH2HPN_GR
LQH2HPN_JR
DEM2812C
DEM2815C
DEM2818C
LQH3NPN_GR
LQH3NPN_JR
LQH3NPN_ME
Multilayer Type
Wire Wound
Ferrite Core
Type
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1206 (3216)
1210 (3225)
1210 (3225)
0402 (1005)
0402 (1005)
0603 (1608)
0806 (2016)
0806 (2016)
0806 (2016)
1008 (2520)
1008 (2520)
1211 (3028)
1211 (3028)
1211 (3028)
1212 (3030)
1212 (3030)
1212 (3030)
p141
p52
p53
p55
p56
p58
p59
p61
p63
p65
p143
p145
p147
p149
p67
p69
p71
p73
p75
p77
p79
p81
p83
p102
p104
p106
p108
p85
p87
p88
p90
p92
p94
p96
p98
p100
p110
p112
p113
p115
p117
p119
p14
p16
p18
p10
p12
p388
p389
p390
p28
p30
p32
Inductors for Power Lines
Series Structure Size Code
in inch (in mm) 1n0.1n 10n 100n 1μ 10μ 100μ 1m 10m 10m 100m 1 10 100
Inductance Range (H) Rated Current (A)
50mA 150mA
600mA
700mA 850mA
700mA
650mA
600mA
700mA 1.4A
620mA 1.25A
1.05A
750mA 950mA
7mA 60mA
7mA 220mA
100mA 120mA
100mA 120mA
600mA 1.1A
1.05A
1.05A 1.6A
1.1A 2.8A
800mA 1.3A
800mA 900mA
1A 2.4A
800mA 1.3A
750mA 950mA
1.27A
1.1A 4.1A
1.1A 1.6A
1.3A 5A
850mA 2.55A
1.5A
1.3A 4.5A
1.1A 1.8A
800mA 1.5A
1.5A 5A
1A 1.1A
1A 1.5A
1.5A 3.2A
700mA 1.4A
1.8A
2.2A
390mA 1.4A
130mA 2.2A
430mA 2.6A
90mA 485mA
130mA 595mA
210mA 2.2A
210mA 2.9A
540mA 3.5A
760mA 3.1A
800mA 3.9A
1A 4.7A
140mA 2.82A
570mA 2.86A
430mA 3A
1μH 10μH
1.5μH
470nH 2.2μH
2.5μH
2.2μH
1μH
470nH 2.2μH
220nH 4.7μH
1μH 3.3μH
1μH 2.5μH
1μH 47μH
1μH 47μH
4.7μH 10μH
4.7μH 10μH
470nH 2.2μH
2.2μH
470nH 2.2μH
240nH 2.2μH
470nH 3.3μH
1μH 2.2μH
470nH 4.7μH
1μH 4.7μH
2.2μH 4.7μH
2.2μH
240nH 2.2μH
470nH 4.7μH
160nH 2.2μH
240nH 2.2μH
560nH
240nH 2.2μH
470nH 4.7μH
1μH 4.7μH
240nH 2.2μH
2.2μH 4.7μH
1μH 3.3μH
470nH 2.2μH
470nH 4.7μH
1μH
1μH
18nH 200nH
20nH 3.3μH
4.9nH 650nH
1μH 82μH
1μH 22μH
330nH 82μH
470nH 100μH
470nH 22μH
470nH 12μH
470nH 15μH
470nH 12μH
470nH 250μH
680nH 47μH
1μH 100μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
LQH3NPN_MR
LQH31CN_03
LQH32CN_23
LQH32CN_33
LQH32CN_53
LQH32DN_23
LQH32DN_53
LQH32PB_N0
LQH32PB_NC
LQH32PN_N0
LQH32PN_NC
DEM3512C
DEM3518C
LQH44PN_GR
LQH44PN_J0
LQH44PN_P0
LQH43CN_03
LQH43CN_33
LQH43PB_26
LQH43PN_26
DEM4518C
LQH5BPB_T0
LQH5BPN_38
LQH5BPN_T0
D52LC
D53LC
D53LC
LQH55DN_03
DG6045C
DG6050C
D63LCB
LQH66SN_03
DS75LC
DEM8030C
DEM8040C
DEM8045C
DG8040C
DEM10050C
DS104C2
DS106C2
DS126C2
DFE201208S
DFE201210S
DFE201210U
DFE201610C
DFE201610E
DFE201610P
DFE201610R
DFE201612C
DFE201612E
DFE201612P
DFE201612R
DFE252007F
Wire Wound
Ferrite Core
Type
Wire Wound
Metal Alloy
Core Type
1212 (3030)
1206 (3216)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1514 (3735)
1514 (3735)
1515 (4040)
1515 (4040)
1515 (4040)
1812 (4532)
1812 (4532)
1812 (4532)
1812 (4532)
1818 (4745)
2020 (5050)
2020 (5050)
2020 (5050)
2020 (5252)
2020 (5252)
2020 (5252)
2220 (5750)
2424 (6060)
2424 (6060)
2524 (6362)
2525 (6363)
2929 (7373)
3131 (8080)
3131 (8080)
3131 (8080)
3131 (8080)
3939 (100100)
4040 (101101)
4040 (101101)
4949 (125125)
0805 (2012)
0805 (2012)
0805 (2012)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
1008 (2520)
High
Current
Low
Rdc
p34
p121
p123
p125
p127
p129
p131
p20
p22
p24
p26
p391
p392
p40
p42
p44
p133
p135
p36
p38
p393
p46
p48
p50
p394
p395
p396
p137
p399
p401
p397
p139
p402
p405
p406
p407
p404
p408
p409
p411
p413
p302
p304
p340
p306
p336
p328
p320
p308
p338
p330
p322
p342
Inductors for Power Lines
Series Structure Size Code
in inch (in mm) 1n0.1n 10n 100n 1μ 10μ 100μ 1m 10m 10m 100m 1 10 100
Inductance Range (H) Rated Current (A)
460mA 2.15A
80mA 970mA
60mA 800mA
450mA 1.45A
100mA 1A
60mA 800mA
100mA 1A
200mA 3.4A
650mA 4.4A
200mA 3.4A
650mA 4.4A
530mA 2.5A
880mA 3.4A
410mA 2.5A
380mA 2A
800mA 2.95A
90mA 1.08A
1.6A 2.95A
240mA 3.4A
240mA 3.4A
1A 3.5A
1.4A 7.7A
650mA 7A
1.4A 7.7A
260mA 2.44A
460mA 3.87A
350mA 2.31A
50mA 6A
900mA 9.5A
1.2A 9.8A
440mA 4.52A
50mA 6A
430mA 9.2A
1.3A 7.5A
2.4A 10A
2.1A 11.2A
1.3A 10.4A
3.5A 15.3A
970mA 11.7A
690mA 12A
580mA 11.8A
2A 6.5A
1.8A 4A
2.1A 4.8A
1.5A 2.8A
1A 6.3A
2A 5.4A
1.6A 3A
1.6A 3.4A
1.8A 6.3A
2.1A 6.5A
1.7A 3.5A
1.2A 3.3A
1μH 47μH
120nH 100μH
1μH 560μH
150nH 10μH
1μH 100μH
1μH 560μH
1μH 100μH
470nH 120μH
470nH 22μH
470nH 120μH
470nH 22μH
680nH 22μH
560nH 22μH
680nH 47μH
1μH 47μH
1μH 22μH
1μH 470μH
560nH 3.9μH
1μH 220μH
1μH 220μH
1.2μH 22μH
470nH 22μH
1μH 150μH
470nH 22μH
1.2μH 100μH
1.1μH 100μH
4.7μH 220μH
120nH 10mH
1μH 100μH
1.2μH 100μH
1μH 150μH
270nH 10mH
1μH 470μH
1.5μH 47μH
1.5μH 33μH
1.5μH 47μH
1μH 100μH
1.5μH 33μH
1.1μH 120μH
1.2μH 330μH
1.7μH 680μH
240nH 2.2μH
560nH 2.2μH
240nH 10μH
240nH 2.2μH
470nH 2.2μH
470nH 2.2μH
330nH 4.7μH
240nH 2.2μH
470nH 2.2μH
470nH 2.2μH
470nH 2.2μH
470nH 4.7μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3
DFE252008C
DFE252010C
DFE252010F
DFE252010P
DFE252010R
DFE252012C
DFE252012F
DFE252012P
DFE252012R
DFE322510C
DFE322512C
DFE322512F
FDSD0412
FDSD0415
FDSD0420
FDSD0512
FDSD0515
FDSD0518
FDV0530
FCUL0530
FCUL0624
FCUL0630
FDUE0640
FDUE0650
FDV0618
FDV0620
FDVE0630
FDSD0630
FCUL1040
FCUL1060
FDUE1040D
FDVE1040
FDA1055
FDUE1245
FDA1254
FDUE1260
LQB15NN_10
LQB18NN_10
LQM18NN_00
LQM21NN_10
LLB2520
LLM2520
LQH31HN_03
LQH31MN_03
LLM3225
LQH32MN_23
LQH44NN_03
LQH43MN_03
LQH43NN_03
LQW04CA_00
LQW15CA_00
Wire Wound
Metal Alloy
Core Type
Multilayer Type
Wire Wound
Ferrite Core
Type
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1210 (3225)
1210 (3225)
1210 (3225)
1515 (4040)
1515 (4040)
1515 (4040)
2019 (5249)
2019 (5249)
2019 (5249)
2423 (6258)
2322 (5857)
2926 (7366)
2926 (7366)
3026 (7667)
3026 (7667)
2926 (7467)
2926 (7467)
2926 (7467)
2726 (7066)
4540 (115100)
4640 (116100)
4440 (112100)
4440 (112100)
4242 (108108)
4848 (123121)
5049 (126125)
5650 (143127)
0402 (1005)
0603 (1608)
0603 (1608)
0805 (2012)
1008 (2520)
1008 (2520)
1206 (3216)
1206 (3216)
1210 (3225)
1210 (3225)
1515 (4040)
1812 (4532)
1812 (4532)
03019 (0805)
0402 (1005)
p310
p312
p344
p332
p324
p314
p346
p334
p326
p316
p318
p348
p350
p352
p354
p356
p358
p360
p364
p378
p380
p382
p369
p370
p365
p366
p367
p362
p384
p386
p371
p368
p375
p372
p377
p373
p165
p167
p183
p185
p422
p423
p169
p171
p425
p173
p181
p175
p178
p187
p188
Inductors for Power Lines
Inductors for General Circuits
Series Structure Size Code
in inch (in mm) 1n0.1n 10n 100n 1μ 10μ 100μ 1m 10m 10m 100m 1 10 100
Inductance Range (H) Rated Current (A)
1.1A 3A
1A 3.5A
1.3A 6.8A
1.7A 5.7A
1.4A 3A
1A 3.8A
1.4A 7.6A
2A 6.6A
1.7A 3.4A
1A 3.8A
1.2A 4.7A
1.7A 6.7A
2.5A 7.5A
2.9A 12A
2.5A 11A
2.3A 6.1A
3.2A 7A
2.7A 9A
3.6A 19.6A
16A 18A
17A 24A
15A 32A
22A 33A
16A 18A
4.1A 14A
3.5A 16.2A
3.1A 20.7A
5.4A 17A
34A 53A
34A 41A
18A 32A
6.1A 14.6A
8A 27.7A
17A 30A
9.1A 29.1A
42A
300mA 380mA
300mA 450mA
15mA 50mA
30mA 250mA
100mA 480mA
44mA 570mA
180mA 920mA
45mA 250mA
19mA 600mA
40mA 445mA
145mA 4.5A
40mA 500mA
25mA 500mA
200mA 620mA
130mA 1.3A
470nH 4.7μH
470nH 10μH
330nH 10μH
330nH 4.7μH
1μH 4.7μH
470nH 10μH
330nH 10μH
330nH 4.7μH
1μH 4.7μH
470nH 10μH
470nH 10μH
470nH 10μH
330nH 4.7μH
220nH 4.7μH
330nH 10μH
1μH 6.8μH
1μH 4.7μH
680nH 10μH
110nH 4.7μH
360nH 470nH
220nH 470nH
120nH 680nH
150nH 420nH
600nH 1μH
240nH 3.3μH
200nH 4.7μH
160nH 10μH
680nH 10μH
180nH 420nH
360nH 560nH
220nH 1μH
1.5μH 10μH
560nH 5.6μH
500nH 2.2μH
680nH 8μH
450nH
220nH 560nH
220nH 560nH
47nH 2.2μH
100nH 4.7μH
1μH 47μH
100nH 220μH
54nH 880nH
150nH 100μH
100nH 1mH
1μH 560μH
510nH 470μH
1μH 1.5mH
1μH 2.4mH
60nH 510nH
22nH 2μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
4
LQG15HN_02
LQG15HS_02
LQG18HN_00
LQW21HN_00
LQP02HQ_02
LQP02TN_02
LQP02TQ_02
LQP03HQ_02
LQP03PN_02
LQP03TG_02
LQP03TN_02
LQP03TQ_02
LQP15MN_02
LQP18MN_02
LQW03AW_00
LQW04AN_00
LQW04AN_10
LQW15AN_00
LQW15AN_10
LQW15AN_80
LQW18AN_00
LQW18AN_10
LQW18AN_80
LQW18AS_00
LQW2BAN_00
LQW2BAS_00
LQW2BHN_03
LQW2BHN_13
LQW2UAS_00
LQW31HN_03
Multilayer Type
Wire Wound
Ferrite Core
Type
Film Type
Wire Wound
Non-Magnetic
Core Type
0402 (1005)
0402 (1005)
0603 (1608)
0805 (2012)
01005 (0402)
01005 (0402)
01005 (0402)
0201 (0603)
0201 (0603)
0201 (0603)
0201 (0603)
0201 (0603)
0402 (1005)
0603 (1608)
0201 (0603)
03015 (0804)
03015 (0804)
0402 (1005)
0402 (1005)
0402 (1005)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0805 (2015)
0805 (2015)
0805 (2015)
0805 (2015)
1008 (2520)
1206 (3216)
p201
p204
p208
p289
p210
p214
p218
p221
p225
p227
p231
p235
p238
p240
p242
p244
p249
p250
p256
p258
p265
p268
p270
p275
p278
p281
p283
p285
p286
p290
RF Inductors
Series Structure Size Code
in inch (in mm) 1n0.1n 10n 100n 1μ 10μ 100μ 1m 10m 10m 100m 1 10 100
Inductance Range (H) Rated Current (A)
150mA 1A
110mA 1A
350mA 1.1A
75mA 160mA
100mA 1A
90mA 320mA
120mA 990mA
80mA 1.1A
900mA 1.4A
80mA 850mA
60mA 850mA
250mA 1A
60mA 400mA
50mA 300mA
230mA 900mA
140mA 1.8A
180mA 200mA
110mA 1A
640mA 1.2A
320mA 3.15A
75mA 850mA
550mA 1.4A
190mA 3.2A
100mA 700mA
750mA 3.8A
180mA 800mA
160mA 1.32A
900mA 1.9A
260mA 1A
230mA 750mA
1.2nH 100nH
470nH 2.2μH
1nH 120nH
1nH 270nH
0.2nH 56nH
0.2nH 39nH
0.2nH 22nH
0.6nH 150nH
2.2nH 4.7nH
0.1nH 120nH
0.6nH 270nH
0.6nH 13nH
1nH 33nH
1.3nH 100nH
1nH 15.5nH
0.8nH 33nH
36nH 56nH
1.5nH 120nH
1.3nH 8.4nH
1.3nH 75nH
2.2nH 470nH
2.2nH 33nH
2.2nH 390nH
1.6nH 390nH
3.2nH 200nH
2.8nH 820nH
3.3nH 470nH
2.7nH 27nH
12nH 4.7μH
8.8nH 100nH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
5
MEMO
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6
Part Numbering p8
Product Detail p10
!Caution/Notice p151
Soldering and Mounting p153
Packaging p158
Inductors for Power Lines
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
7
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
o Part Numbering
(Part Number)
Inductors for Power Lines
3214675 89:
1.0x0.5mm
1.6x0.8mm
2.0x1.25mm
2.0x1.6mm
2.5x2.0mm
3.0x3.0mm
3.2x1.6mm
3.2x2.5mm
4.5x3.2mm
4.0x4.0mm
5.0x5.0mm
5.7x5.0mm
6.3x6.3mm
0402
0603
0805
0806
1008
1212
1206
1210
1812
1515
2020
2220
2525
Code Nominal Dimensions (LxW) Size Code (in inch)
15
18
21
31
32
43
44
1Product ID
LQ Chip Inductors (Chip Coils)
Product ID
2Structure
21
MLQ P R54 MN G 0 D
H
W
M
Wire Wound Type (Ferrite Core)
Multilayer Type (Ferrite Core)
Code Structure
5Category
N
B
W
Code Category
8Features (Except for LQH
pp
P/LQM
pp
P)
0
1
2
3
5
7
8
LQM/LQH*1 /LQW
LQW
LQH32C/32D
LQH32C/43CN
LQH2MC/32C/32D
LQM21F
Code Series
7Inductance Tolerance
6Inductance
D
J
K
M
N
±0.5nH
±5%
±10%
±20%
±30%
Code Inductance Tolerance
4Applications and Characteristics
3Dimensions (LxW)
15
18
21
2M
2H
3N
31
32
43
44
5B
55
66
Expressed by three-digit alphanumerics. The unit is micro-henry
(μH). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits. If inductance
is less than 0.1μH, the inductance code is expressed by a
combination of two figures and the capital letter "N," and the unit
of inductance is nano-henry (nH). The capital letter "N" indicates
the unit of "nH," and also expresses a decimal point. In this case, all
figures are significant digits. For those products whose inductance
values are specified using three designated digits, these values may
be indicated using the closest two digits instead.
*1 Except for LQH32 Series
D
F
D
S
C
P
for Choke (Low-current DC Power Supplies)
for Choke (DC Power Supplies)
for Choke
for Choke (Magnetically Shielded Type)
for Choke (Coating Type)
for Power Line
Code Applications and Characteristics
LQM
LQH
LQH/LQW
LQM/LQH
Series
Standard Type
Special Feature Classification
Standard Type
Low DC Resistance
Standard Type
Low DC Resistance
Low Profile Type
Large Current Type
Low DC Resistance
/Large Current Type
Features
8Thickness
(LQHppP/LQMppP,*7F6!#.2$-0LQH43P/LQH5BPN_38)
B
C
D
E
F
0
G
J
M
N
P
T
0.35mm
0.5mm
0.6mm
0.7mm
0.8mm
0.85mm
0.9mm
1.1mm
1.4mm
1.55mm
1.65mm
2.0mm
Code Nominal Dimensions (T)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
8
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
89Thickness (LQH43P/LQH5BPN_38 Only)
26
38
2.6mm
4.0mm max.
Code Dimensions (T)
*1 Except for LQH2MC/LQH2HP_G0/LQH3NP/LQH43C
*2 LQM21D(22 - 47μH)/LQM21F(4.7 - 47μH)
*3 LQM21D(1.0 - 10μH)/LQM21F(1.0 - 2.2μH)
*4 LQM21D(1.0 - 10μH)/LQM21F(1.0 - 2.2μH)/LQM21P
*5 Except for LQH3NP_MR
:Packaging
K
F
L
E
B
J
D
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Code Packaging
LQH*1 /LQM21*2
LQH3NP_MR
LQH*5/LQM18P/LQM21*2 /LQM31P/LQM32P/LQM2HP/LQM2MP
LQH3NP_MR
LQH2MC/LQM/LQW
LQM18/LQM21*3
LQM18/LQM21*4 /LQW
Series
Continued from the preceding page.
9Electrode (Except for LQHppP/LQMppP)
F#"H J0##
0
2
3
LQM/LQW
LQH2MC
LQH (Except for LQH2MC)
Code Series
Sn
LF Solder
Electrode
9Specification
(LQHppP/LQMppP,*7F6!#.2$-0LQH43P/LQH5BPN_38)
0/S
C
H/A/E
R
Standard Type
Good Bias Current Characteristics Type
High Spec Type (Low DC Resistance;
Good Bias Current Characteristics Type)
Low DC Resistance Type
Code Specification
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
9
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH2HPN_GR Series 1008 (2520) inch (mm)
Appearance/Dimensions
2.5±0.2
0.62±0.2
(in mm)
0.9±0.1
2.0±0.2
2.0±0.2
0.62±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number
Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
S.R.F.* (min.) Operating temp. range
(Self-temp. rise included)
Operating temp. range
(Self-temp. rise not included) Remark
LQH2HPNR47MGRp
0.47μH ±20% 1MHz 2900mA 2520mA(Ambient temp.85°C)
1470mA(Ambient temp.105°C) 0.045Ω±20% 120MHz -40 to 125°C -40 to 105°C *1
LQH2HPNR68MGRp
0.68μH ±20% 1MHz 2430mA 2330mA(Ambient temp.85°C)
1350mA(Ambient temp.105°C) 0.055Ω±20% 110MHz -40 to 125°C -40 to 105°C *1
LQH2HPN1R0MGRp
1.0μH ±20% 1MHz 2130mA 2100mA(Ambient temp.85°C)
1200mA(Ambient temp.105°C) 0.068Ω±20% 100MHz -40 to 125°C -40 to 105°C *1
LQH2HPN1R5MGRp
1.5μH ±20% 1MHz 1700mA 1850mA(Ambient temp.85°C)
1110mA(Ambient temp.105°C) 0.087Ω±20% 90MHz -40 to 125°C -40 to 105°C *1
LQH2HPN2R2MGRp
2.2μH ±20% 1MHz 1550mA 1470mA(Ambient temp.85°C)
850mA(Ambient temp.105°C) 0.134Ω±20% 80MHz -40 to 125°C -40 to 105°C *1
LQH2HPN3R3MGRp
3.3μH ±20% 1MHz 1230mA 1100mA(Ambient temp.85°C)
660mA(Ambient temp.105°C) 0.225Ω±20% 70MHz -40 to 125°C -40 to 105°C *1
LQH2HPN4R7MGRp
4.7μH ±20% 1MHz 1090mA 1000mA(Ambient temp.85°C)
570mA(Ambient temp.105°C) 0.300Ω±20% 50MHz -40 to 125°C -40 to 105°C *1
LQH2HPN6R8MGRp
6.8μH ±20% 1MHz 830mA 860mA(Ambient temp.85°C)
490mA(Ambient temp.105°C) 0.395Ω±20% 40MHz -40 to 125°C -40 to 105°C *1
LQH2HPN100MGRp
10μH ±20% 1MHz 700mA 710mA(Ambient temp.85°C)
430mA(Ambient temp.105°C) 0.560Ω±20% 30MHz -40 to 125°C -40 to 105°C *1
LQH2HPN150MGRp
15μH ±20% 1MHz 570mA 560mA(Ambient temp.85°C)
310mA(Ambient temp.105°C) 0.925Ω±20% 20MHz -40 to 125°C -40 to 105°C *1
LQH2HPN220MGRp
22μH ±20% 1MHz 460mA 430mA(Ambient temp.85°C)
250mA(Ambient temp.105°C) 1.360Ω±20% 15MHz -40 to 125°C -40 to 105°C *1
LQH2HPN101MGRp
100μH ±20% 1MHz 210mA 150mA(Ambient temp.85°C) 5.9Ω±20% 5MHz -40 to 105°C -40 to 85°C *2
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
*1: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C (at the rated current under 85°C) or 20°C (at the
rated current under 105°C).
*2: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 105°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
10
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
11
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH2HPN_JR Series 1008 (2520) inch (mm)
Appearance/Dimensions
2.5±0.2
0.65±0.2
(in mm)
1.1±0.1
2.0±0.2
0.65±0.2
AB
A: 2.75 max.
B: 2.25 max.
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH2HPNR47NJRp0.47μH ±30% 1MHz 3500mA 2750mA(Ambient temp.85°C)
1650mA(Ambient temp.105°C) 0.031Ω±20% 190MHz
LQH2HPN1R0NJRp1.0μH ±30% 1MHz 2600mA 2400mA(Ambient temp.85°C)
1440mA(Ambient temp.105°C) 0.048Ω±20% 120MHz
LQH2HPN1R2NJRp1.2μH ±30% 1MHz 2450mA 2070mA(Ambient temp.85°C)
1240mA(Ambient temp.105°C) 0.055Ω±20% 100MHz
LQH2HPN1R5NJRp1.5μH ±30% 1MHz 2200mA 1810mA(Ambient temp.85°C)
1080mA(Ambient temp.105°C) 0.075Ω±20% 95MHz
LQH2HPN2R2MJRp2.2μH ±20% 1MHz 1700mA 1650mA(Ambient temp.85°C)
990mA(Ambient temp.105°C) 0.092Ω±20% 50MHz
LQH2HPN3R3MJRp3.3μH ±20% 1MHz 1450mA 1420mA(Ambient temp.85°C)
850mA(Ambient temp.105°C) 0.13Ω±20% 45MHz
LQH2HPN4R7MJRp4.7μH ±20% 1MHz 1230mA 1290mA(Ambient temp.85°C)
770mA(Ambient temp.105°C) 0.17Ω±20% 40MHz
LQH2HPN6R8MJRp6.8μH ±20% 1MHz 1050mA 1000mA(Ambient temp.85°C)
600mA(Ambient temp.105°C) 0.26Ω±20% 35MHz
LQH2HPN100MJRp10μH ±20% 1MHz 830mA 830mA(Ambient temp.85°C)
490mA(Ambient temp.105°C) 0.38Ω±20% 30MHz
LQH2HPN150MJRp15μH ±20% 1MHz 690mA 710mA(Ambient temp.85°C)
420mA(Ambient temp.105°C) 0.55Ω±20% 20MHz
LQH2HPN220MJRp22μH ±20% 1MHz 530mA 540mA(Ambient temp.85°C)
320mA(Ambient temp.105°C) 0.84Ω±20% 20MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of intial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated
current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85-105°C).
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
12
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
13
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH2MCN_02 Series 0806 (2016) inch (mm)
Appearance/Dimensions
(in mm)
2.0±0.2
0.6±0.2 0.6±0.2
1.6±0.2
0.90±0.05
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 100
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH2MCN1R0M02p1.0μH ±20% 1MHz 485mA 0.30Ω±30% 100MHz
LQH2MCN1R5M02p1.5μH ±20% 1MHz 445mA 0.40Ω±30% 95MHz
LQH2MCN2R2M02p2.2μH ±20% 1MHz 425mA 0.48Ω±30% 70MHz
LQH2MCN3R3M02p3.3μH ±20% 1MHz 375mA 0.60Ω±30% 65MHz
LQH2MCN4R7M02p4.7μH ±20% 1MHz 300mA 0.8Ω±30% 60MHz
LQH2MCN5R6M02p5.6μH ±20% 1MHz 280mA 0.9Ω±30% 60MHz
LQH2MCN6R8M02p6.8μH ±20% 1MHz 255mA 1.0Ω±30% 55MHz
LQH2MCN8R2M02p8.2μH ±20% 1MHz 235mA 1.1Ω±30% 50MHz
LQH2MCN100K02p10μH ±10% 1MHz 225mA 1.2Ω±30% 48MHz
LQH2MCN120K02p12μH ±10% 1MHz 210mA 1.4Ω±30% 44MHz
LQH2MCN150K02p15μH ±10% 1MHz 200mA 1.6Ω±30% 40MHz
LQH2MCN180K02p18μH ±10% 1MHz 190mA 1.8Ω±30% 35MHz
LQH2MCN220K02p22μH ±10% 1MHz 185mA 2.1Ω±30% 30MHz
LQH2MCN270K02p27μH ±10% 1MHz 180mA 2.5Ω±30% 30MHz
LQH2MCN330K02p33μH ±10% 1MHz 160mA 2.8Ω±30% 28MHz
LQH2MCN390K02p39μH ±10% 1MHz 125mA 4.4Ω±30% 24MHz
LQH2MCN470K02p47μH ±10% 1MHz 120mA 5.1Ω±30% 18MHz
LQH2MCN560K02p56μH ±10% 1MHz 110mA 5.7Ω±30% 17MHz
LQH2MCN680K02p68μH ±10% 1MHz 100mA 6.6Ω±30% 14MHz
LQH2MCN820K02p82μH ±10% 1MHz 90mA 7.5Ω±30% 14MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
14
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
15
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH2MCN_52 Series 0806 (2016) inch (mm)
Appearance/Dimensions
(in mm)
2.0±0.2
0.6±0.2 0.6±0.2
1.6±0.2
0.65±0.05
1.0±0.2
0.1 min.
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 100
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH2MCN1R0M52p1.0μH ±20% 1MHz 595mA 0.25Ω±30% 215MHz
LQH2MCN1R5M52p1.5μH ±20% 1MHz 540mA 0.33Ω±30% 165MHz
LQH2MCN2R2M52p2.2μH ±20% 1MHz 500mA 0.42Ω±30% 125MHz
LQH2MCN3R3M52p3.3μH ±20% 1MHz 360mA 0.74Ω±30% 110MHz
LQH2MCN4R7M52p4.7μH ±20% 1MHz 335mA 0.91Ω±30% 90MHz
LQH2MCN6R8M52p6.8μH ±20% 1MHz 285mA 1.23Ω±30% 65MHz
LQH2MCN100M52p10μH ±20% 1MHz 200mA 2.27Ω±30% 60MHz
LQH2MCN120M52p12μH ±20% 1MHz 170mA 2.4Ω±30% 30MHz
LQH2MCN150M52p15μH ±20% 1MHz 150mA 3.5Ω±30% 30MHz
LQH2MCN180M52p18μH ±20% 1MHz 140mA 4.0Ω±30% 30MHz
LQH2MCN220M52p22μH ±20% 1MHz 130mA 5.5Ω±30% 30MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
16
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
17
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH2MPN_GR Series 0806 (2016) inch (mm)
Appearance/Dimensions
(in mm)
2.0±0.1
1.6±0.1
0.90±0.05
0.65±0.20.65±0.2
1.0±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH2MPNR33NGRp0.33μH ±30% 1MHz 2200mA 1130mA(Ambient temp.85°C)
670mA(Ambient temp.105°C) 0.15Ω±20% 130MHz
LQH2MPNR47NGRp0.47μH ±30% 1MHz 1950mA 1060mA(Ambient temp.85°C)
630mA(Ambient temp.105°C) 0.18Ω±20% 120MHz
LQH2MPN1R0NGRp1.0μH ±30% 1MHz 1550mA 900mA(Ambient temp.85°C)
540mA(Ambient temp.105°C) 0.25Ω±20% 100MHz
LQH2MPN1R5NGRp1.5μH ±30% 1MHz 1330mA 790mA(Ambient temp.85°C)
470mA(Ambient temp.105°C) 0.32Ω±20% 60MHz
LQH2MPN2R2MGRp2.2μH ±20% 1MHz 1180mA 680mA(Ambient temp.85°C)
400mA(Ambient temp.105°C) 0.39Ω±20% 50MHz
LQH2MPN3R3MGRp3.3μH ±20% 1MHz 1020mA 640mA(Ambient temp.85°C)
380mA(Ambient temp.105°C) 0.47Ω±20% 45MHz
LQH2MPN4R7MGRp4.7μH ±20% 1MHz 870mA 580mA(Ambient temp.85°C)
340mA(Ambient temp.105°C) 0.60Ω±20% 40MHz
LQH2MPN6R8MGRp6.8μH ±20% 1MHz 730mA 530mA(Ambient temp.85°C)
310mA(Ambient temp.105°C) 0.72Ω±20% 35MHz
LQH2MPN100MGRp10μH ±20% 1MHz 610mA 480mA(Ambient temp.85°C)
280mA(Ambient temp.105°C) 0.88Ω±20% 30MHz
LQH2MPN150MGRp15μH ±20% 1MHz 490mA 340mA(Ambient temp.85°C)
200mA(Ambient temp.105°C) 1.7Ω±20% 25MHz
LQH2MPN220MGRp22μH ±20% 1MHz 410mA 290mA(Ambient temp.85°C)
170mA(Ambient temp.105°C) 2.1Ω±20% 20MHz
LQH2MPN330MGRp33μH ±20% 1MHz 310mA 200mA(Ambient temp.85°C)
120mA(Ambient temp.105°C) 4.3Ω±20% 15MHz
LQH2MPN470MGRp47μH ±20% 1MHz 270mA 180mA(Ambient temp.85°C)
110mA(Ambient temp.105°C) 5.3Ω±20% 10MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated
current is applied to the products,the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85-105°C).
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
18
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH2MPN680MGRp68μH ±20% 1MHz 230mA 160mA(Ambient temp.85°C)
100mA(Ambient temp.105°C) 6.7Ω±20% 7MHz
LQH2MPN820MGRp82μH ±20% 1MHz 210mA 150mA(Ambient temp.85°C)
90mA(Ambient temp.105°C) 7.3Ω±20% 5MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated
current is applied to the products,the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85-105°C).
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
19
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH32PB_N0 Series 1210 (3225) inch (mm)
Appearance/Dimensions
2.7±0.2
(in mm)
3.2±0.3
2.5±0.2
2.5±0.2
A: 2.8 max.
AA
0.9±0.30.9±0.3
1.55±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32PBR47NN0p0.47μH ±30% 1MHz 3400mA 2550mA(Ambient temp.85°C)
1600mA(Ambient temp.105°C) 0.030Ω±20% 100MHz
LQH32PB1R0NN0p1.0μH ±30% 1MHz 2300mA 2050mA(Ambient temp.85°C)
1320mA(Ambient temp.105°C) 0.045Ω±20% 100MHz
LQH32PB1R5NN0p1.5μH ±30% 1MHz 1750mA 1750mA(Ambient temp.85°C)
1010mA(Ambient temp.105°C) 0.057Ω±20% 70MHz
LQH32PB2R2NN0p2.2μH ±30% 1MHz 1550mA 1600mA(Ambient temp.85°C)
970mA(Ambient temp.105°C) 0.076Ω±20% 70MHz
LQH32PB3R3NN0p3.3μH ±30% 1MHz 1250mA 1200mA(Ambient temp.85°C)
670mA(Ambient temp.105°C) 0.12Ω±20% 50MHz
LQH32PB4R7NN0p4.7μH ±30% 1MHz 1000mA 1000mA(Ambient temp.85°C)
530mA(Ambient temp.105°C) 0.18Ω±20% 40MHz
LQH32PB6R8NN0p6.8μH ±30% 1MHz 850mA 850mA(Ambient temp.85°C)
510mA(Ambient temp.105°C) 0.24Ω±20% 40MHz
LQH32PB100MN0p10μH ±20% 1MHz 750mA 700mA(Ambient temp.85°C)
380mA(Ambient temp.105°C) 0.38Ω±20% 30MHz
LQH32PB150MN0p15μH ±20% 1MHz 600mA 520mA(Ambient temp.85°C)
320mA(Ambient temp.105°C) 0.57Ω±20% 20MHz
LQH32PB220MN0p22μH ±20% 1MHz 500mA 450mA(Ambient temp.85°C)
240mA(Ambient temp.105°C) 0.81Ω±20% 20MHz
LQH32PB330MN0p33μH ±20% 1MHz 380mA 390mA(Ambient temp.85°C)
190mA(Ambient temp.105°C) 1.15Ω±20% 13MHz
LQH32PB470MN0p47μH ±20% 1MHz 330mA 310mA(Ambient temp.85°C)
140mA(Ambient temp.105°C) 1.78Ω±20% 11MHz
LQH32PB680MN0p68μH ±20% 1MHz 280mA 275mA(Ambient temp.85°C)
120mA(Ambient temp.105°C) 2.28Ω±20% 11MHz
LQH32PB101MN0p100μH ±20% 1MHz 180mA 250mA(Ambient temp.85°C)
110mA(Ambient temp.105°C) 2.70Ω±20% 8MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
20
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32PB121MN0p120μH ±20% 1MHz 170mA 200mA(Ambient temp.85°C)
80mA(Ambient temp.105°C) 4.38Ω±20% 8MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
21
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH32PB_NC Series 1210 (3225) inch (mm)
Appearance/Dimensions
(in mm)
2.5±0.22.7±0.2
1.55±0.15
3.2±0.3 2.5±0.2
0.9±0.3 0.9±0.3
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32PBR47NNCp0.47μH ±30% 1MHz 4400mA 2900mA(Ambient temp.85°C)
1490mA(Ambient temp.105°C) 0.024Ω±20% 100MHz
LQH32PB1R0NNCp1.0μH ±30% 1MHz 3000mA 2500mA(Ambient temp.85°C)
1380mA(Ambient temp.105°C) 0.036Ω±20% 100MHz
LQH32PB1R5NNCp1.5μH ±30% 1MHz 2600mA 2100mA(Ambient temp.85°C)
1110mA(Ambient temp.105°C) 0.053Ω±20% 70MHz
LQH32PB2R2NNCp2.2μH ±30% 1MHz 2000mA 1850mA(Ambient temp.85°C)
910mA(Ambient temp.105°C) 0.064Ω±20% 70MHz
LQH32PB3R3NNCp3.3μH ±30% 1MHz 1900mA 1550mA(Ambient temp.85°C)
800mA(Ambient temp.105°C) 0.100Ω±20% 50MHz
LQH32PB4R7NNCp4.7μH ±30% 1MHz 1600mA 1200mA(Ambient temp.85°C)
610mA(Ambient temp.105°C) 0.155Ω±20% 40MHz
LQH32PB6R8NNCp6.8μH ±30% 1MHz 1300mA 1100mA(Ambient temp.85°C)
550mA(Ambient temp.105°C) 0.220Ω±20% 40MHz
LQH32PB100MNCp10μH ±20% 1MHz 1000mA 900mA(Ambient temp.85°C)
450mA(Ambient temp.105°C) 0.295Ω±20% 30MHz
LQH32PB150MNCp15μH ±20% 1MHz 800mA 700mA(Ambient temp.85°C)
330mA(Ambient temp.105°C) 0.475Ω±20% 20MHz
LQH32PB220MNCp22μH ±20% 1MHz 650mA 550mA(Ambient temp.85°C)
270mA(Ambient temp.105°C) 0.685Ω±20% 20MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
22
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
23
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH32PN_N0 Series 1210 (3225) inch (mm)
Appearance/Dimensions
2.7±0.2
(in mm)
3.2±0.3
2.5±0.2
2.5±0.2
A: 2.8 max.
AA
0.9±0.30.9±0.3
1.55±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32PNR47NN0p0.47μH ±30% 1MHz 3400mA 2550mA 0.03Ω±20% 100MHz
LQH32PN1R0NN0p1.0μH ±30% 1MHz 2300mA 2050mA 0.045Ω±20% 100MHz
LQH32PN1R5NN0p1.5μH ±30% 1MHz 1750mA 1750mA 0.057Ω±20% 70MHz
LQH32PN2R2NN0p2.2μH ±30% 1MHz 1550mA 1600mA 0.076Ω±20% 70MHz
LQH32PN3R3NN0p3.3μH ±30% 1MHz 1250mA 1200mA 0.12Ω±20% 50MHz
LQH32PN4R7NN0p4.7μH ±30% 1MHz 1000mA 1000mA 0.18Ω±20% 40MHz
LQH32PN6R8NN0p6.8μH ±30% 1MHz 850mA 850mA 0.24Ω±20% 40MHz
LQH32PN100MN0p10μH ±20% 1MHz 750mA 700mA 0.38Ω±20% 30MHz
LQH32PN150MN0p15μH ±20% 1MHz 600mA 520mA 0.57Ω±20% 20MHz
LQH32PN220MN0p22μH ±20% 1MHz 500mA 450mA 0.81Ω±20% 20MHz
LQH32PN330MN0p33μH ±20% 1MHz 380mA 390mA 1.15Ω±20% 13MHz
LQH32PN470MN0p47μH ±20% 1MHz 330mA 310mA 1.78Ω±20% 11MHz
LQH32PN680MN0p68μH ±20% 1MHz 280mA 275mA 2.28Ω±20% 11MHz
LQH32PN101MN0p100μH ±20% 1MHz 180mA 250mA 2.70Ω±20% 8MHz
LQH32PN121MN0p120μH ±20% 1MHz 170mA 200mA 4.38Ω±20% 8MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
24
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
25
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH32PN_NC Series 1210 (3225) inch (mm)
Appearance/Dimensions
(in mm)
2.5±0.22.7±0.2
1.55±0.15
3.2±0.3 2.5±0.2
0.9±0.3 0.9±0.3
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32PNR47NNCp0.47μH ±30% 1MHz 4400mA 2900mA 0.024Ω±20% 100MHz
LQH32PN1R0NNCp1.0μH ±30% 1MHz 3000mA 2500mA 0.036Ω±20% 100MHz
LQH32PN1R5NNCp1.5μH ±30% 1MHz 2600mA 2100mA 0.053Ω±20% 70MHz
LQH32PN2R2NNCp2.2μH ±30% 1MHz 2000mA 1850mA 0.064Ω±20% 70MHz
LQH32PN3R3NNCp3.3μH ±30% 1MHz 1900mA 1550mA 0.100Ω±20% 50MHz
LQH32PN4R7NNCp4.7μH ±30% 1MHz 1600mA 1200mA 0.155Ω±20% 40MHz
LQH32PN6R8NNCp6.8μH ±30% 1MHz 1300mA 1100mA 0.220Ω±20% 40MHz
LQH32PN100MNCp10μH ±20% 1MHz 1000mA 900mA 0.295Ω±20% 30MHz
LQH32PN150MNCp15μH ±20% 1MHz 800mA 700mA 0.475Ω±20% 20MHz
LQH32PN220MNCp22μH ±20% 1MHz 650mA 550mA 0.685Ω±20% 20MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
26
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
27
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH3NPN_GR Series 1212 (3030) inch (mm)
Appearance/Dimensions
0.9±0.2 0.9±0.2
3.0±0.1
0.9±0.1
3.0±0.1
(in mm)
1R0
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number
Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
S.R.F.* (min.) Operating temp. range
(Self-temp. rise included)
Operating temp. range
(Self-temp. rise not included) Remark
LQH3NPNR47NGRp
0.47μH ±30% 1MHz 2820mA 2540mA(Ambient temp.85°C)
1520mA(Ambient temp.105°C) 0.047Ω±20% 180MHz -40 to 125°C -40 to 105°C *1
LQH3NPN1R0MGRp
1.0μH ±20% 1MHz 1700mA 2080mA(Ambient temp.85°C)
1240mA(Ambient temp.105°C) 0.062Ω±20% 100MHz -40 to 125°C -40 to 105°C *1
LQH3NPN1R5MGRp
1.5μH ±20% 1MHz 1400mA 2040mA(Ambient temp.85°C)
1220mA(Ambient temp.105°C) 0.074Ω±20% 80MHz -40 to 125°C -40 to 105°C *1
LQH3NPN2R2MGRp
2.2μH ±20% 1MHz 1180mA 1730mA(Ambient temp.85°C)
1030mA(Ambient temp.105°C) 0.087Ω±20% 50MHz -40 to 125°C -40 to 105°C *1
LQH3NPN3R3MGRp
3.3μH ±20% 1MHz 1050mA 1580mA(Ambient temp.85°C)
940mA(Ambient temp.105°C) 0.12Ω±20% 30MHz -40 to 125°C -40 to 105°C *1
LQH3NPN4R7MGRp
4.7μH ±20% 1MHz 850mA 1520mA(Ambient temp.85°C)
910mA(Ambient temp.105°C) 0.14Ω±20% 27MHz -40 to 125°C -40 to 105°C *1
LQH3NPN6R8MGRp
6.8μH ±20% 1MHz 720mA 1140mA(Ambient temp.85°C)
680mA(Ambient temp.105°C) 0.23Ω±20% 25MHz -40 to 125°C -40 to 105°C *1
LQH3NPN100MGRp
10μH ±20% 1MHz 570mA 1120mA(Ambient temp.85°C)
670mA(Ambient temp.105°C) 0.28Ω±20% 20MHz -40 to 125°C -40 to 105°C *1
LQH3NPN150MGRp
15μH ±20% 1MHz 480mA 900mA(Ambient temp.85°C)
540mA(Ambient temp.105°C) 0.39Ω±20% 15MHz -40 to 125°C -40 to 105°C *1
LQH3NPN220MGRp
22μH ±20% 1MHz 390mA 750mA(Ambient temp.85°C)
450mA(Ambient temp.105°C) 0.53Ω±20% 10MHz -40 to 125°C -40 to 105°C *1
LQH3NPN330MGRp
33μH ±20% 1MHz 320mA 600mA(Ambient temp.85°C)
360mA(Ambient temp.105°C) 0.86Ω±20% 8MHz -40 to 125°C -40 to 105°C *1
LQH3NPN470MGRp
47μH ±20% 1MHz 260mA 460mA(Ambient temp.85°C)
270mA(Ambient temp.105°C) 1.4Ω±20% 5MHz -40 to 125°C -40 to 105°C *1
LQH3NPN680MGRp
68μH ±20% 1MHz 220mA 280mA(Ambient temp.85°C) 2.1Ω±20% 6MHz -40 to 105°C -40 to 85°C *2
LQH3NPN101MGRp
100μH ±20% 1MHz 190mA 220mA(Ambient temp.85°C) 3.2Ω±20% 5MHz -40 to 105°C -40 to 85°C *2
LQH3NPN151MGRp
150μH ±20% 1MHz 160mA 180mA(Ambient temp.85°C) 4.9Ω±20% 3MHz -40 to 105°C -40 to 85°C *2
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
*1: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C (at the rated current under 85°C) or 20°C (at the
rated current under 105°C).
*2: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 105°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
28
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number
Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
S.R.F.* (min.) Operating temp. range
(Self-temp. rise included)
Operating temp. range
(Self-temp. rise not included) Remark
LQH3NPN181MGRp
180μH ±20% 1MHz 130mA 160mA(Ambient temp.85°C) 6.4Ω±20% 2MHz -40 to 105°C -40 to 85°C *2
LQH3NPN221MGRp
220μH ±20% 1MHz 120mA 150mA(Ambient temp.85°C) 7.5Ω±20% 2MHz -40 to 105°C -40 to 85°C *2
LQH3NPN251MGRp
250μH ±20% 1MHz 110mA 140mA(Ambient temp.85°C) 8Ω±20% 2MHz -40 to 105°C -40 to 85°C *2
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
*1: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C (at the rated current under 85°C) or 20°C (at the
rated current under 105°C).
*2: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 105°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
29
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH3NPN_JR Series 1212 (3030) inch (mm)
Appearance/Dimensions
3.0±0.2
0.9±0.2 0.9±0.2
(in mm)
3.0±0.2
1.1±0.1
3.0±0.2
1R0
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH3NPNR68NJRp0.68μH ±30% 1MHz 2700mA 2860mA(Ambient temp.85°C)
1280mA(Ambient temp.105°C) 0.032Ω±20% 130MHz
LQH3NPN1R0MJRp1.0μH ±20% 1MHz 2250mA 2780mA(Ambient temp.85°C)
1230mA(Ambient temp.105°C) 0.040Ω±20% 100MHz
LQH3NPN1R5MJRp1.5μH ±20% 1MHz 1950mA 2510mA(Ambient temp.85°C)
1100mA(Ambient temp.105°C) 0.049Ω±20% 60MHz
LQH3NPN2R2MJRp2.2μH ±20% 1MHz 1800mA 2200mA(Ambient temp.85°C)
980mA(Ambient temp.105°C) 0.068Ω±20% 45MHz
LQH3NPN3R3MJRp3.3μH ±20% 1MHz 1350mA 1700mA(Ambient temp.85°C)
750mA(Ambient temp.105°C) 0.095Ω±20% 45MHz
LQH3NPN4R7MJRp4.7μH ±20% 1MHz 1180mA 1580mA(Ambient temp.85°C)
710mA(Ambient temp.105°C) 0.12Ω±20% 40MHz
LQH3NPN6R8MJRp6.8μH ±20% 1MHz 970mA 1360mA(Ambient temp.85°C)
610mA(Ambient temp.105°C) 0.18Ω±20% 35MHz
LQH3NPN100MJRp10μH ±20% 1MHz 810mA 1200mA(Ambient temp.85°C)
530mA(Ambient temp.105°C) 0.24Ω±20% 30MHz
LQH3NPN150MJRp15μH ±20% 1MHz 650mA 870mA(Ambient temp.85°C)
370mA(Ambient temp.105°C) 0.38Ω±20% 25MHz
LQH3NPN220MJRp22μH ±20% 1MHz 520mA 800mA(Ambient temp.85°C)
350mA(Ambient temp.105°C) 0.50Ω±20% 20MHz
LQH3NPN330MJRp33μH ±20% 1MHz 420mA 630mA(Ambient temp.85°C)
280mA(Ambient temp.105°C) 0.79Ω±20% 15MHz
LQH3NPN470MJRp47μH ±20% 1MHz 360mA 570mA(Ambient temp.85°C)
240mA(Ambient temp.105°C) 1.0Ω±20% 10MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated
current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85°C to 105°C).
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
30
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
31
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH3NPN_ME Series 1212 (3030) inch (mm)
Appearance/Dimensions
0.8±0.3 0.8±0.3 (in mm)
3.0±0.2
1.4±0.1
3.0±0.2
1R0
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH3NPN1R0MMEp1.0μH ±20% 1MHz 2350mA 3000mA(Ambient temp.85°C)
1600mA(Ambient temp.105°C) 0.025Ω±20% 100MHz
LQH3NPN2R2MMEp2.2μH ±20% 1MHz 1800mA 2100mA(Ambient temp.85°C)
1220mA(Ambient temp.105°C) 0.065Ω±20% 60MHz
LQH3NPN3R3MMEp3.3μH ±20% 1MHz 1520mA 1900mA(Ambient temp.85°C)
1150mA(Ambient temp.105°C) 0.084Ω±20% 55MHz
LQH3NPN4R7MMEp4.7μH ±20% 1MHz 1300mA 1700mA(Ambient temp.85°C)
1000mA(Ambient temp.105°C) 0.1Ω±20% 40MHz
LQH3NPN6R8MMEp6.8μH ±20% 1MHz 1040mA 1450mA(Ambient temp.85°C)
900mA(Ambient temp.105°C) 0.14Ω±20% 30MHz
LQH3NPN100MMEp10μH ±20% 1MHz 810mA 1280mA(Ambient temp.85°C)
800mA(Ambient temp.105°C) 0.19Ω±20% 20MHz
LQH3NPN150MMEp15μH ±20% 1MHz 660mA 1020mA(Ambient temp.85°C)
620mA(Ambient temp.105°C) 0.29Ω±20% 15MHz
LQH3NPN220MMEp22μH ±20% 1MHz 570mA 860mA(Ambient temp.85°C)
540mA(Ambient temp.105°C) 0.4Ω±20% 10MHz
LQH3NPN330MMEp33μH ±20% 1MHz 440mA 760mA(Ambient temp.85°C)
460mA(Ambient temp.105°C) 0.55Ω±20% 8MHz
LQH3NPN470MMEp47μH ±20% 1MHz 380mA 610mA(Ambient temp.85°C)
380mA(Ambient temp.105°C) 0.82Ω±20% 5MHz
LQH3NPN101MMEp100μH ±20% 1MHz 260mA 430mA(Ambient temp.85°C)
270mA(Ambient temp.105°C) 1.59Ω±20% 3MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated
current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85°C to 105°C).
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
32
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
33
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH3NPN_MR Series 1212 (3030) inch (mm)
Appearance/Dimensions
(in mm)
Polarity Marking
3.0±0.2
3.0±0.2
3.0±0.2
1.0±0.2 1.0±0.2
1.40±0.1
Packaging
Code Packaging Minimum
Quantity
Eø180mm Embossed Taping 2000
Fø330mm Embossed Taping 8000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH3NPN1R0MMRp1.0μH ±20% 1MHz 1600mA 2150mA 0.042Ω±20% 135MHz
LQH3NPN2R2MMRp2.2μH ±20% 1MHz 1380mA 1750mA 0.068Ω±20% 75MHz
LQH3NPN3R3MMRp3.3μH ±20% 1MHz 1200mA 1550mA 0.088Ω±20% 70MHz
LQH3NPN4R7MMRp4.7μH ±20% 1MHz 950mA 1400mA 0.105Ω±20% 57MHz
LQH3NPN6R8MMRp6.8μH ±20% 1MHz 830mA 1250mA 0.155Ω±20% 40MHz
LQH3NPN100MMRp10μH ±20% 1MHz 590mA 1150mA 0.210Ω±20% 30MHz
LQH3NPN220MMRp22μH ±20% 1MHz 430mA 750mA 0.480Ω±20% 20MHz
LQH3NPN330MMRp33μH ±20% 1MHz 380mA 600mA 0.790Ω±20% 15MHz
LQH3NPN470MMRp47μH ±20% 1MHz 320mA 460mA 1.140Ω±20% 10MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
34
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
35
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH43PB_26 Series 1812 (4532) inch (mm)
Appearance/Dimensions
3.6±0.2 3.2±0.2
2.6±0.2
3.2±0.2
4.5±0.3
1.0min. 1.0min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 2500
Lø180mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH43PB1R0N26p1.0μH ±30% 1MHz 3400mA 3300mA(Ambient temp.85°C)
1410mA(Ambient temp.105°C) 0.026Ω±20% 100MHz
LQH43PB2R2M26p2.2μH ±20% 1MHz 2300mA 2500mA(Ambient temp.85°C)
1120mA(Ambient temp.105°C) 0.042Ω±20% 45MHz
LQH43PB3R3M26p3.3μH ±20% 1MHz 1800mA 2100mA(Ambient temp.85°C)
1000mA(Ambient temp.105°C) 0.052Ω±20% 40MHz
LQH43PB4R7M26p4.7μH ±20% 1MHz 1400mA 1600mA(Ambient temp.85°C)
780mA(Ambient temp.105°C) 0.075Ω±20% 35MHz
LQH43PB6R8M26p6.8μH ±20% 1MHz 1200mA 1400mA(Ambient temp.85°C)
760mA(Ambient temp.105°C) 0.098Ω±20% 30MHz
LQH43PB8R2M26p8.2μH ±20% 1MHz 1100mA 1300mA(Ambient temp.85°C)
670mA(Ambient temp.105°C) 0.128Ω±20% 25MHz
LQH43PB100M26p10μH ±20% 1MHz 1050mA 1170mA(Ambient temp.85°C)
620mA(Ambient temp.105°C) 0.147Ω±20% 20MHz
LQH43PB220M26p22μH ±20% 1MHz 700mA 780mA(Ambient temp.85°C)
400mA(Ambient temp.105°C) 0.327Ω±20% 15MHz
LQH43PB470M26p47μH ±20% 1MHz 470mA 520mA(Ambient temp.85°C)
280mA(Ambient temp.105°C) 0.718Ω±20% 8MHz
LQH43PB101M26p100μH ±20% 1MHz 320mA 320mA(Ambient temp.85°C)
180mA(Ambient temp.105°C) 1.538Ω±20% 4MHz
LQH43PB151M26p150μH ±20% 1MHz 280mA 260mA(Ambient temp.85°C)
140mA(Ambient temp.105°C) 2.362Ω±20% 3MHz
LQH43PB221M26p220μH ±20% 1MHz 220mA 240mA(Ambient temp.85°C)
130mA(Ambient temp.105°C) 2.900Ω±20% 2MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
36
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
37
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH43PN_26 Series 1812 (4532) inch (mm)
Appearance/Dimensions
3.6±0.2
4.5±0.3
2.6±0.2
3.2±0.2
3.2±0.2
1.0min. 1.0min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 2500
Lø180mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH43PN1R0N26p1.0μH ±30% 1MHz 3400mA 3300mA 0.026Ω±20% 100MHz
LQH43PN2R2M26p2.2μH ±20% 1MHz 2300mA 2500mA 0.042Ω±20% 45MHz
LQH43PN3R3M26p3.3μH ±20% 1MHz 1800mA 2100mA 0.052Ω±20% 40MHz
LQH43PN4R7M26p4.7μH ±20% 1MHz 1400mA 1600mA 0.075Ω±20% 35MHz
LQH43PN6R8M26p6.8μH ±20% 1MHz 1200mA 1400mA 0.098Ω±20% 30MHz
LQH43PN8R2M26p8.2μH ±20% 1MHz 1100mA 1300mA 0.128Ω±20% 25MHz
LQH43PN100M26p10μH ±20% 1MHz 1050mA 1170mA 0.147Ω±20% 20MHz
LQH43PN220M26p22μH ±20% 1MHz 700mA 780mA 0.327Ω±20% 15MHz
LQH43PN470M26p47μH ±20% 1MHz 470mA 520mA 0.718Ω±20% 8MHz
LQH43PN101M26p100μH ±20% 1MHz 320mA 320mA 1.538Ω±20% 4MHz
LQH43PN151M26p150μH ±20% 1MHz 280mA 260mA 2.362Ω±20% 3MHz
LQH43PN221M26p220μH ±20% 1MHz 220mA 240mA 2.900Ω±20% 2MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be
limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
38
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
39
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH44PN_GR Series 1515 (4040) inch (mm)
Appearance/Dimensions
4.0±0.1
4.0±0.1
1.1±0.2 1.1±0.2
0.9±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 4500
Lø180mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH44PNR68NGRp0.68μH ±30% 1MHz 2400mA 2500mA(Ambient temp.85°C)
1500mA(Ambient temp.105°C) 0.043Ω±20% 54MHz
LQH44PN2R2NGRp2.2μH ±30% 1MHz 1600mA 2000mA(Ambient temp.85°C)
1200mA(Ambient temp.105°C) 0.074Ω±20% 45MHz
LQH44PN3R3NGRp3.3μH ±30% 1MHz 1500mA 1700mA(Ambient temp.85°C)
1000mA(Ambient temp.105°C) 0.11Ω±20% 25MHz
LQH44PN4R7MGRp4.7μH ±20% 1MHz 1200mA 1600mA(Ambient temp.85°C)
960mA(Ambient temp.105°C) 0.13Ω±20% 17MHz
LQH44PN6R8MGRp6.8μH ±20% 1MHz 850mA 1400mA(Ambient temp.85°C)
840mA(Ambient temp.105°C) 0.17Ω±20% 15MHz
LQH44PN100MGRp10μH ±20% 1MHz 800mA 1100mA(Ambient temp.85°C)
660mA(Ambient temp.105°C) 0.27Ω±20% 13MHz
LQH44PN150MGRp15μH ±20% 1MHz 640mA 900mA(Ambient temp.85°C)
540mA(Ambient temp.105°C) 0.42Ω±20% 10MHz
LQH44PN220MGRp22μH ±20% 1MHz 500mA 750mA(Ambient temp.85°C)
450mA(Ambient temp.105°C) 0.57Ω±20% 8MHz
LQH44PN330MGRp33μH ±20% 1MHz 400mA 480mA(Ambient temp.85°C)
280mA(Ambient temp.105°C) 1.4Ω±20% 6MHz
LQH44PN470MGRp47μH ±20% 1MHz 360mA 410mA(Ambient temp.85°C)
240mA(Ambient temp.105°C) 1.7Ω±20% 6MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of intial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max (ambient temperature 85°C). When rated
current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C max (ambient temperature 85-105°C).
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
40
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
41
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH44PN_J0 Series 1515 (4040) inch (mm)
Appearance/Dimensions
(in mm)
4.0±0.2
4.0±0.2
1.1±0.2
1.1±0.2
1.1±0.1
1.5 (typ.)
0.4 (typ.)
(0.12)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 4500
Lø180mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH44PN1R0NJ0p1.0μH ±30% 100kHz 2000mA 1530mA 0.048Ω±20% 130MHz
LQH44PN1R5MJ0p1.5μH ±20% 100kHz 1600mA 1380mA 0.061Ω±20% 90MHz
LQH44PN2R2MJ0p2.2μH ±20% 100kHz 1320mA 1230mA 0.074Ω±20% 68MHz
LQH44PN3R3MJ0p3.3μH ±20% 100kHz 900mA 1000mA 0.088Ω±20% 55MHz
LQH44PN4R7MJ0p4.7μH ±20% 100kHz 840mA 980mA 0.117Ω±20% 50MHz
LQH44PN6R8MJ0p6.8μH ±20% 100kHz 720mA 860mA 0.143Ω±20% 38MHz
LQH44PN100MJ0p10μH ±20% 100kHz 560mA 790mA 0.207Ω±20% 30MHz
LQH44PN150MJ0p15μH ±20% 100kHz 430mA 610mA 0.385Ω±20% 25MHz
LQH44PN220MJ0p22μH ±20% 100kHz 400mA 550mA 0.480Ω±20% 18MHz
LQH44PN330MJ0p33μH ±20% 100kHz 360mA 430mA 0.740Ω±20% 15MHz
LQH44PN470MJ0p47μH ±20% 100kHz 300mA 380mA 1.014Ω±20% 13MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be
limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
42
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
43
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH44PN_P0 Series 1515 (4040) inch (mm)
Appearance/Dimensions
(in mm)
4.0±0.2
4.0±0.2
1.2±0.2 1.2±0.2
1.65±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 3500
Lø180mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH44PN1R0NP0p1.0μH ±30% 1MHz 2950mA 2450mA 0.030Ω±20% 90MHz
LQH44PN2R2MP0p2.2μH ±20% 1MHz 2500mA 1800mA 0.049Ω±20% 70MHz
LQH44PN3R3MP0p3.3μH ±20% 1MHz 2100mA 1770mA 0.065Ω±20% 50MHz
LQH44PN4R7MP0p4.7μH ±20% 1MHz 1700mA 1700mA 0.080Ω±20% 40MHz
LQH44PN6R8MP0p6.8μH ±20% 1MHz 1400mA 1340mA 0.12Ω±20% 35MHz
LQH44PN100MP0p10μH ±20% 1MHz 1150mA 1170mA 0.16Ω±20% 25MHz
LQH44PN220MP0p22μH ±20% 1MHz 800mA 790mA 0.37Ω±20% 17MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be
limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
44
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
45
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH5BPB_T0 Series 2020 (5050) inch (mm)
Appearance/Dimensions
(in mm)
5.0±0.2
5.0±0.2
5.0±0.2
1.5±0.2 1.5±0.2
2.0±0.2
(0.2)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 3000
Lø180mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH5BPBR47NT0p0.47μH ±30% 100kHz 7.7A 4.0A(Ambient temp.85°C)
2.05A(Ambient temp.105°C) 0.012Ω±20% 220MHz
LQH5BPB1R0NT0p1.0μH ±30% 100kHz 5.8A 3.1A(Ambient temp.85°C)
1.68A(Ambient temp.105°C) 0.019Ω±20% 90MHz
LQH5BPB1R2NT0p1.2μH ±30% 100kHz 5.4A 3.1A(Ambient temp.85°C)
1.68A(Ambient temp.105°C) 0.019Ω±20% 90MHz
LQH5BPB1R5NT0p1.5μH ±30% 100kHz 5.0A 3.0A(Ambient temp.85°C)
1.63A(Ambient temp.105°C) 0.024Ω±20% 70MHz
LQH5BPB2R2NT0p2.2μH ±30% 100kHz 4.0A 2.6A(Ambient temp.85°C)
1.37A(Ambient temp.105°C) 0.030Ω±20% 55MHz
LQH5BPB2R7NT0p2.7μH ±30% 100kHz 3.8A 2.5A(Ambient temp.85°C)
1.23A(Ambient temp.105°C) 0.035Ω±20% 50MHz
LQH5BPB3R3NT0p3.3μH ±30% 100kHz 3.5A 2.3A(Ambient temp.85°C)
1.21A(Ambient temp.105°C) 0.044Ω±20% 40MHz
LQH5BPB4R7NT0p4.7μH ±30% 100kHz 3.0A 2.0A(Ambient temp.85°C)
1.09A(Ambient temp.105°C) 0.058Ω±20% 40MHz
LQH5BPB6R8NT0p6.8μH ±30% 100kHz 2.5A 1.65A(Ambient temp.85°C)
0.96A(Ambient temp.105°C) 0.083Ω±20% 30MHz
LQH5BPB100MT0p10μH ±20% 100kHz 2.0A 1.6A(Ambient temp.85°C)
0.87A(Ambient temp.105°C) 0.106Ω±20% 25MHz
LQH5BPB150MT0p15μH ±20% 100kHz 1.6A 1.20A(Ambient temp.85°C)
0.62A(Ambient temp.105°C) 0.187Ω±20% 18MHz
LQH5BPB220MT0p22μH ±20% 100kHz 1.4A 1.05A(Ambient temp.85°C)
0.55A(Ambient temp.105°C) 0.259Ω±20% 15MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be
limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
46
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
47
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH5BPN_38 Series 2020 (5050) inch (mm)
Appearance/Dimensions
4.9±0.2
1.5±0.2 1.5±0.2
4.9±0.2 4.0 max.
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 1500
Lø180mm Embossed Taping 400
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH5BPN1R0N38p1.0μH ±30% 100kHz 7000mA 4600mA 0.012Ω±20% 54MHz
LQH5BPN1R5N38p1.5μH ±30% 100kHz 6500mA 4500mA 0.014Ω±20% 50MHz
LQH5BPN2R2N38p2.2μH ±30% 100kHz 5000mA 4300mA 0.016Ω±20% 45MHz
LQH5BPN3R3N38p3.3μH ±30% 100kHz 4000mA 4000mA 0.021Ω±20% 25MHz
LQH5BPN4R7N38p4.7μH ±30% 100kHz 3500mA 3800mA 0.026Ω±20% 17MHz
LQH5BPN6R8M38p6.8μH ±20% 100kHz 3000mA 3000mA 0.039Ω±20% 15MHz
LQH5BPN100M38p10μH ±20% 100kHz 2600mA 2200mA 0.056Ω±20% 13MHz
LQH5BPN150M38p15μH ±20% 100kHz 1800mA 1900mA 0.08Ω±20% 10MHz
LQH5BPN220M38p22μH ±20% 100kHz 1600mA 1500mA 0.11Ω±20% 8.0MHz
LQH5BPN330M38p33μH ±20% 100kHz 1300mA 1300mA 0.15Ω±20% 6.5MHz
LQH5BPN470M38p47μH ±20% 100kHz 1100mA 1100mA 0.22Ω±20% 6.0MHz
LQH5BPN680M38p68μH ±20% 100kHz 900mA 930mA 0.33Ω±20% 5.0MHz
LQH5BPN101M38p100μH ±20% 100kHz 750mA 740mA 0.48Ω±20% 4.0MHz
LQH5BPN151M38p150μH ±20% 100kHz 650mA 630mA 0.68Ω±20% 3.5MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max (ambient temperature 85°C). Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
48
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
49
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH5BPN_T0 Series 2020 (5050) inch (mm)
Appearance/Dimensions
(in mm)
5.0±0.2
5.0±0.2
5.0±0.2
1.5±0.2 1.5±0.2
2.0±0.2
(0.2)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 3000
Lø180mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH5BPNR47NT0p0.47μH ±30% 100kHz 7.7A 4.0A 0.012Ω±20% 220MHz
LQH5BPN1R0NT0p1.0μH ±30% 100kHz 5.8A 3.1A 0.019Ω±20% 90MHz
LQH5BPN1R2NT0p1.2μH ±30% 100kHz 5.4A 3.1A 0.019Ω±20% 90MHz
LQH5BPN1R5NT0p1.5μH ±30% 100kHz 5.0A 3.0A 0.024Ω±20% 70MHz
LQH5BPN2R2NT0p2.2μH ±30% 100kHz 4.0A 2.6A 0.030Ω±20% 55MHz
LQH5BPN2R7NT0p2.7μH ±30% 100kHz 3.8A 2.5A 0.035Ω±20% 50MHz
LQH5BPN3R3NT0p3.3μH ±30% 100kHz 3.5A 2.3A 0.044Ω±20% 40MHz
LQH5BPN4R7NT0p4.7μH ±30% 100kHz 3.0A 2.0A 0.058Ω±20% 40MHz
LQH5BPN6R8NT0p6.8μH ±30% 100kHz 2.5A 1.65A 0.083Ω±20% 30MHz
LQH5BPN100MT0p10μH ±20% 100kHz 2.0A 1.60A 0.106Ω±20% 25MHz
LQH5BPN150MT0p15μH ±20% 100kHz 1.6A 1.20A 0.187Ω±20% 18MHz
LQH5BPN220MT0p22μH ±20% 100kHz 1.4A 1.05A 0.259Ω±20% 15MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, self-temperature rise shall be
limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
50
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
51
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18PN_B0 Series 0603 (1608) inch (mm)
Appearance/Dimensions
Ferrite
0.4±0.2
0.8±0.151.6±0.15
0.35±0.05
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM18PN1R5NB0p1.5μH ±30% 1MHz 600mA 0.35Ω±25% 50MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
52
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18PN_C0 Series 0603 (1608) inch (mm)
Appearance/Dimensions
Ferrite
0.4±0.2
1.6±0.15 0.8±0.15
0.5±0.05
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM18PNR47NC0p0.47μH ±30% 1MHz 850mA 0.15Ω±25% 50MHz
LQM18PN1R0NC0p1.0μH ±30% 1MHz 750mA 0.20Ω±25% 50MHz
LQM18PN1R5NC0p1.5μH ±30% 1MHz 720mA 0.22Ω±25% 50MHz
LQM18PN1R8NC0p1.8μH ±30% 1MHz 700mA 0.24Ω±25% 50MHz
LQM18PN2R2NC0p2.2μH ±30% 1MHz 700mA 0.24Ω±25% 50MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
53
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
54
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18PN_D0 Series 0603 (1608) inch (mm)
Appearance/Dimensions
Ferrite
0.4±0.2
1.6±0.15 0.8±0.15
0.6±0.15
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM18PN2R5ND0p2.5μH ±30% 1MHz 700mA 0.24Ω±25% 60MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
55
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18PN_DH Series 0603 (1608) inch (mm)
Appearance/Dimensions
Ferrite
0.4±0.2
1.6±0.15 0.8±0.15
0.6±0.15
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM18PN2R2MDHp2.2μH ±20% 1MHz 250mA(Max) / 300mA(Typ.) 650mA(Max) / 800mA(Typ.) 0.38Ω(typ.) 60MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
56
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
57
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18PN_F0 Series 0603 (1608) inch (mm)
Appearance/Dimensions
1.6±0.15
0.4±0.20
0.80±0.15
0.8±0.15
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM18PN1R0NF0p1.0μH ±30% 1MHz 600mA 0.28Ω±25% 50MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
58
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18PN_FH Series 0603 (1608) inch (mm)
Appearance/Dimensions
1.6±0.15
0.4±0.20
0.80±0.15
0.8±0.15
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM18PNR47MFHp0.47μH ±20% 1MHz 1.3A(Max.) / 1.5A(Typ.) 1.4A(Max.) / 1.7A(Typ.) 0.1Ω(typ.) 100MHz
LQM18PN1R0MFHp1.0μH ±20% 1MHz 0.55A(Max) / 0.7A(Typ.) 1.3A(Max) / 1.45A(Typ.) 0.13Ω(typ.) 100MHz
LQM18PN1R5MFHp1.5μH ±20% 1MHz 0.4A(Max.) / 0.5A(Typ.) 1.1A(Max.) / 1.25A(Typ.) 0.17Ω(typ.) 80MHz
LQM18PN2R2MFHp2.2μH ±20% 1MHz 0.3A(Max) / 0.35A(Typ.) 0.7A(Max) / 0.9A(Typ.) 0.38Ω(typ.) 80MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
59
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
60
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18PN_FR Series 0603 (1608) inch (mm)
Appearance/Dimensions
1.6±0.15
0.4±0.20
0.80±0.15
0.8±0.15
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM18PNR22NFRp0.22μH ±30% 1MHz 1250mA 0.11Ω±25% 100MHz
LQM18PNR47NFRp0.47μH ±30% 1MHz 1100mA 0.15Ω±25% 100MHz
LQM18PN1R0MFRp1.0μH ±20% 1MHz 950mA 0.20Ω±25% 100MHz
LQM18PN1R5MFRp1.5μH ±20% 1MHz 800mA 0.23Ω±25% 100MHz
LQM18PN2R2MFRp2.2μH ±20% 1MHz 750mA 0.30Ω±25% 70MHz
LQM18PN3R3MFRp3.3μH ±20% 1MHz 700mA 0.35Ω±25% 60MHz
LQM18PN4R7MFRp4.7μH ±20% 1MHz 620mA 0.44Ω±25% 40MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
61
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
62
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18PN_GH Series 0603 (1608) inch (mm)
Appearance/Dimensions
(in mm)
1.6±0.2
0.9±0.1
0.8±0.2
0.4±0.2 Ferrite Electrode
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM18PN1R0MGHp1.0μH ±20% 1MHz 0.8A(Max.) / 0.9A(Typ.) 1.05A(Max.) / 1.15A(Typ.) 0.2Ω(typ.) 100MHz
LQM18PN2R2MGHp2.2μH ±20% 1MHz 0.25A(Max) / 0.35A(Typ.) 1.05A(Max) / 1.15A(Typ.) 0.2Ω(typ.) 70MHz
LQM18PN3R3MGHp3.3μH ±20% 1MHz 0.15A(Max.) / 0.2A(Typ.) 1.05A(Max.) / 1.15A(Typ.) 0.2Ω(typ.) 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
63
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
64
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18PW_CH Series 0603 (1608) inch (mm)
Appearance/Dimensions
(in mm)
Inductance: 1.0 to 2.2μH
Dimension of T Inductance: 2.5μH
0.50±0.15
0.45±0.15
1.6±0.2
T
0.8±0.2
0.4±0.2
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM18PW1R0MCHp1.0μH ±20% 1MHz 0.60A(Max) / 0.70A(Typ.) 0.95A(Max) / 1.05A(Typ.) 0.23Ω(typ.) 70MHz
LQM18PW2R2MCHp2.2μH ±20% 1MHz 0.20A(Max) / 0.30A(Typ.) 0.75A(Max) / 0.85A(Typ.) 0.38Ω(typ.) 50MHz
LQM18PW2R5NCHp2.5μH ±30% 1MHz 0.10A(Max) / 0.15A(Typ.) 0.90A(Max) / 1.00A(Typ.) 0.24Ω(typ.) 50MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
65
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
66
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21PN_C0 Series 0805 (2012) inch (mm)
Appearance/Dimensions
Ferrite
(in mm)
2.0±0.2
1.25±0.2
0.5±0.2
0.5±0.05
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM21PNR47MC0p0.47μH ±20% 1MHz 1.1A(Ambient temp.85°C)
0.82A(Ambient temp.125°C) 0.12Ω±25% 100MHz
LQM21PN1R0MC0p1.0μH ±20% 1MHz 0.8A(Ambient temp.85°C)
0.60A(Ambient temp.125°C) 0.19Ω±25% 90MHz
LQM21PN1R5MC0p1.5μH ±20% 1MHz 0.7A(Ambient temp.85°C)
0.52A(Ambient temp.125°C) 0.26Ω±25% 70MHz
LQM21PN2R2MC0p2.2μH ±20% 1MHz 0.6A(Ambient temp.85°C)
0.45A(Ambient temp.125°C) 0.34Ω±25% 50MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_C0 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
67
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.) Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQM21P_G0/GC/GR/C0 series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
Rated Current
at 85°C
Rated Current
at 125°C
0
12585
Rated Current (A)
Operating Temperature (°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
68
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21PN_CA Series 0805 (2012) inch (mm)
Appearance/Dimensions
2.0±0.15 1.25±0.15
0.55±0.1
(in mm)
0.5±0.2
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM21PN2R2MCAp2.2μH ±20% 1MHz 0.28A(Max) / 0.30A(Typ.) 1.05A(Max) / 1.30A(Typ.) 0.2Ω(typ.) 40MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
69
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
70
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21PN_CH Series 0805 (2012) inch (mm)
Appearance/Dimensions
0.5±0.2
2.0±0.15 1.25±0.15
(in mm)
0.5±0.05
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM21PNR47MCHp0.47μH ±20% 1MHz 1.6A(Max.) / 1.8A(Typ.) 1.4A(Max.) / 1.8A(Typ.) 0.11Ω(typ.) 80MHz
LQM21PNR82MCHp0.82μH ±20% 1MHz 0.7A(Max.) / 0.9A(Typ.) 1.3A(Max.) / 1.6A(Typ.) 0.13Ω(typ.) 60MHz
LQM21PN1R0MCHp1.0μH ±20% 1MHz 0.35A(Max.) / 0.5A(Typ.) 1.2A(Max.) / 1.5A(Typ.) 0.15Ω(typ.) 50MHz
LQM21PN1R5MCHp1.5μH ±20% 1MHz 0.25A(Max.) / 0.4A(Typ.) 1.1A(Max.) / 1.4A(Typ.) 0.17Ω(typ.) 40MHz
LQM21PN2R2MCHp2.2μH ±20% 1MHz 0.18A(Max.) / 0.2A(Typ.) 1.05A(Max.) / 1.3A(Typ.) 0.2Ω(typ.) 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
71
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
72
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21PN_EH Series 0805 (2012) inch (mm)
Appearance/Dimensions
0.5±0.2
2.0±0.15 1.25±0.15
0.7±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM21PNR24MEHp0.24μH ±20% 1MHz 2.8A(Max.) / 3.1A(Typ.) 2.4A(Max.) / 2.9A(Typ.) 0.04Ω(typ.) 130MHz
LQM21PNR47MEHp0.47μH ±20% 1MHz 1.5A(Max.) / 1.8A(Typ.) 1.9A(Max.) / 2.4A(Typ.) 0.06Ω(typ.) 80MHz
LQM21PN1R0MEHp1.0μH ±20% 1MHz 0.8A(Max.) / 1A(Typ.) 1.6A(Max.) / 2A(Typ.) 0.085Ω(typ.) 50MHz
LQM21PN1R5MEHp1.5μH ±20% 1MHz 0.4A(Max.) / 0.55A(Typ.) 1.5A(Max.) / 1.8A(Typ.) 0.1Ω(typ.) 40MHz
LQM21PN2R2MEHp2.2μH ±20% 1MHz 0.3A(Max.) / 0.45A(Typ.) 1.1A(Max.) / 1.4A(Typ.) 0.175Ω(typ.) 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
73
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
74
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21PN_G0 Series 0805 (2012) inch (mm)
Appearance/Dimensions
(in mm)
0.9±0.1
1.25±0.152.0±0.15
0.5±0.2
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM21PNR47MG0p0.47μH ±20% 1MHz 1.3A(Ambient temp.85°C)
0.95A(Ambient temp.125°C) 0.075Ω(typ.) 100MHz
LQM21PNR54MG0p0.54μH ±20% 1MHz 1.3A(Ambient temp.85°C)
0.95A(Ambient temp.125°C) 0.075Ω(typ.) 100MHz
LQM21PN3R3MG0p3.3μH ±20% 1MHz 0.8A(Ambient temp.85°C)
0.55A(Ambient temp.125°C) 0.165Ω(typ.) 30MHz
LQM21PN3R3NG0p3.3μH ±30% 1MHz 0.8A(Ambient temp.85°C)
0.55A(Ambient temp.125°C) 0.165Ω(typ.) 30MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_G0 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
75
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.) Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQM21P_G0/GC/GR/C0 series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
Rated Current
at 85°C
Rated Current
at 125°C
0
12585
Rated Current (A)
Operating Temperature (°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
76
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21PN_GC Series 0805 (2012) inch (mm)
Appearance/Dimensions
(in mm)
0.9±0.1
1.25±0.152.0±0.15
0.5±0.2
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM21PN1R0NGCp1.0μH ±30% 1MHz 0.9A(Ambient temp.85°C)
0.65A(Ambient temp.125°C) 0.10Ω±25% 50MHz
LQM21PN2R2NGCp2.2μH ±30% 1MHz 0.8A(Ambient temp.85°C)
0.6A(Ambient temp.125°C) 0.23Ω±25% 40MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_GC series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
77
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.) Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQM21P_G0/GC/GR/C0 series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
Rated Current
at 85°C
Rated Current
at 125°C
0
12585
Rated Current (A)
Operating Temperature (°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
78
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21PN_GH Series 0805 (2012) inch (mm)
Appearance/Dimensions
(in mm)
0.9±0.1
1.25±0.152.0±0.15
0.5±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM21PNR47MGHp0.47μH ±20% 1MHz 1.8A(Max) / 2.4A(Typ.) 2.4A(Max) / 3.1A(Typ.) 0.04Ω(typ.) 80MHz
LQM21PN1R0MGHp1.0μH ±20% 1MHz 1.1A(Max) / 1.5A(Typ.) 1.7A(Max) / 2.0A(Typ.) 0.08Ω(typ.) 60MHz
LQM21PN1R5MGHp1.5μH ±20% 1MHz 0.64A(Max) / 1.2A(Typ.) 1.4A(Max) / 1.8A(Typ.) 0.11Ω(typ.) 50MHz
LQM21PN2R2MGHp2.2μH ±20% 1MHz 0.45A(Max) / 0.7A(Typ.) 1.3A(Max) / 1.7A(Typ.) 0.125Ω(typ.) 40MHz
LQM21PN4R7MGHp4.7μH ±20% 1MHz 0.25A(Max) / 0.27A(Typ.) 1.0A(Max) / 1.2A(Typ.) 0.22Ω(typ.) 20MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
79
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
80
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21PN_GR Series 0805 (2012) inch (mm)
Appearance/Dimensions
(in mm)
0.9±0.1
1.25±0.152.0±0.15
0.5±0.2
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM21PN1R0NGRp1.0μH ±30% 1MHz 1.3A(Ambient temp.85°C)
0.95A(Ambient temp.125°C) 0.066Ω±25% 50MHz
LQM21PN3R3MGRp3.3μH ±20% 1MHz 1.0A(Ambient temp.85°C)
0.75A(Ambient temp.125°C) 0.150Ω±25% 30MHz
LQM21PN3R3NGRp3.3μH ±30% 1MHz 1.0A(Ambient temp.85°C)
0.75A(Ambient temp.125°C) 0.150Ω±25% 30MHz
LQM21PN4R7MGRp4.7μH ±20% 1MHz 0.8A(Ambient temp.85°C)
0.6A(Ambient temp.125°C) 0.23Ω±25% 30MHz
LQM21PN4R7NGRp4.7μH ±30% 1MHz 0.8A(Ambient temp.85°C)
0.6A(Ambient temp.125°C) 0.23Ω±25% 30MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQM21P_GR series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
81
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.) Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQM21P_G0/GC/GR/C0 series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
Rated Current
at 85°C
Rated Current
at 125°C
0
12585
Rated Current (A)
Operating Temperature (°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
82
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21PN_GS Series 0805 (2012) inch (mm)
Appearance/Dimensions
(in mm)
0.9±0.1
1.25±0.152.0±0.15
0.5±0.2
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM21PN2R2MGSp2.2μH ±20% 1MHz 950mA 0.180Ω±25% 40MHz
LQM21PN4R7MGSp4.7μH ±20% 1MHz 750mA 0.290Ω±25% 20MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
83
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
84
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2HPN_CH Series 1008 (2520) inch (mm)
Appearance/Dimensions
2.5±0.2
0.6±0.2
2.0±0.2
(in mm)
0.5±0.05
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM2HPNR24MCHp0.24μH ±20% 1MHz 2.55A(Max.) / 3A(Typ.) 2.2A(Max.) / 2.7A(Typ.) 0.055Ω(typ.) 130MHz
LQM2HPNR47MCHp0.47μH ±20% 1MHz 1.66A(Max.) / 1.95A(Typ.) 1.5A(Max.) / 1.9A(Typ.) 0.115Ω(typ.) 80MHz
LQM2HPNR68MCHp0.68μH ±20% 1MHz 1.1A(Max.) / 1.3A(Typ.) 1.5A(Max.) / 1.8A(Typ.) 0.12Ω(typ.) 60MHz
LQM2HPN1R0MCHp1.0μH ±20% 1MHz 0.6A(Max.) / 0.7A(Typ.) 1.7A(Max.) / 2.1A(Typ.) 0.08Ω(typ.) 50MHz
LQM2HPN1R5MCHp1.5μH ±20% 1MHz 0.6A(Max.) / 0.7A(Typ.) 0.95A(Max.) / 1.1A(Typ.) 0.285Ω(typ.) 40MHz
LQM2HPN2R2MCHp2.2μH ±20% 1MHz 0.43A(Max.) / 0.5A(Typ.) 0.85A(Max.) / 1.05A(Typ.) 0.355Ω(typ.) 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
85
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
86
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2HPN_E0 Series 1008 (2520) inch (mm)
Appearance/Dimensions
0.7±0.1
2.0±0.2
2.5±0.2
0.6±0.2
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM2HPNR56ME0p0.56μH ±20% 1MHz 1500mA 0.06Ω±25% 70MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
87
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2HPN_EH Series 1008 (2520) inch (mm)
Appearance/Dimensions
0.7±0.1
2.0±0.2
2.5±0.2
0.6±0.2
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM2HPNR24MEHp0.24μH ±20% 1MHz 4.5A(Max) / 5.0A(Typ.) 3.0A(Max) / 3.8A(Typ.) 0.027Ω(typ.) 130MHz
LQM2HPNR47MEHp0.47μH ±20% 1MHz 4.0A(Max) / 4.3A(Typ.) 2.2A(Max) / 2.6A(Typ.) 0.055Ω(typ.) 80MHz
LQM2HPNR68MEHp0.68μH ±20% 1MHz 2.1A(Max) / 2.3A(Typ.) 1.85A(Max) / 2.3A(Typ.) 0.075Ω(typ.) 60MHz
LQM2HPN1R0MEHp1.0μH ±20% 1MHz 1.9A(Max) / 2.1A(Typ.) 1.65A(Max) / 2.0A(Typ.) 0.095Ω(typ.) 50MHz
LQM2HPN1R5MEHp1.5μH ±20% 1MHz 1.2A(Max) / 1.4A(Typ.) 1.45A(Max) / 1.8A(Typ.) 0.12Ω(typ.) 40MHz
LQM2HPN2R2MEHp2.2μH ±20% 1MHz 0.8A(Max) / 1.0A(Typ.) 1.3A(Max) / 1.7A(Typ.) 0.15Ω(typ.) 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
88
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
89
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2HPN_G0 Series 1008 (2520) inch (mm)
Appearance/Dimensions
2.5±0.2
2.0±0.2
0.6±0.2
0.9±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM2HPNR47MG0p0.47μH ±20% 1MHz 1.8A(Ambient temp.85°C)
1.3A(Ambient temp.125°C) 0.040Ω(typ.) 100MHz
LQM2HPN1R0MG0p1.0μH ±20% 1MHz 1.6A(Ambient temp.85°C)
1.2A(Ambient temp.125°C) 0.055Ω(typ.) 60MHz
LQM2HPN1R5MG0p1.5μH ±20% 1MHz 1.5A(Ambient temp.85°C)
1.1A(Ambient temp.125°C) 0.070Ω(typ.) 50MHz
LQM2HPN2R2MG0p2.2μH ±20% 1MHz 1.3A(Ambient temp.85°C)
0.97A(Ambient temp.125°C) 0.080Ω(typ.) 40MHz
LQM2HPN3R3MG0p3.3μH ±20% 1MHz 1.2A(Ambient temp.85°C)
0.9A(Ambient temp.125°C) 0.10Ω(typ.) 30MHz
LQM2HPN4R7MG0p4.7μH ±20% 1MHz 1.1A(Ambient temp.85°C)
0.82A(Ambient temp.125°C) 0.11Ω(typ.) 25MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQM2HP_G0 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
90
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.) Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQM2HP_G0 series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
Rated Current
at 85°C
Rated Current
at 125°C
0
12585
Rated Current (A)
Operating Temperature (°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
91
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2HPN_GC Series 1008 (2520) inch (mm)
Appearance/Dimensions
2.5±0.2
2.0±0.2
0.6±0.2
0.9±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.) Operating temp. range
LQM2HPN1R0MGCp1.0μH ±20% 1MHz 1500mA 0.08Ω±25% 50MHz -30 to 85°C
LQM2HPN3R3MGCp3.3μH ±20% 1MHz 1000mA 0.16Ω±25% 30MHz -55 to 125°C
LQM2HPN4R7MGCp4.7μH ±20% 1MHz 800mA 0.18Ω±25% 25MHz -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
92
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
93
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2HPN_GH Series 1008 (2520) inch (mm)
Appearance/Dimensions
2.5±0.2
2.0±0.2
0.6±0.2
0.9±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM2HPNR24MGHp0.24μH ±20% 1MHz 4.5A(Max) / 5.7A(Typ.) 3.3A(Max) / 4.2A(Typ.) 0.024Ω(typ.) 80MHz
LQM2HPNR33MGHp0.33μH ±20% 1MHz 5A(Max) / 5.3A(Typ.) 3A(Max) / 4A(Typ.) 0.03Ω(typ.) 80MHz
LQM2HPNR47MGHp0.47μH ±20% 1MHz 4.5A(Max) / 4.8A(Typ.) 2.6A(Max) / 3.3A(Typ.) 0.04Ω(typ.) 80MHz
LQM2HPNR68MGHp0.68μH ±20% 1MHz 3.8A(Max) / 4.0A(Typ.) 2.3A(Max) / 2.9A(Typ.) 0.05Ω(typ.) 60MHz
LQM2HPN1R0MGHp1.0μH ±20% 1MHz 2.0A(Max) / 2.3A(Typ.) 2.3A(Max) / 2.9A(Typ.) 0.05Ω(typ.) 50MHz
LQM2HPN1R5MGHp1.5μH ±20% 1MHz 1.5A(Max) / 1.6A(Typ.) 2.0A(Max) / 2.6A(Typ.) 0.065Ω(typ.) 40MHz
LQM2HPN2R2MGHp2.2μH ±20% 1MHz 1.5A(Max) / 1.6A(Typ.) 1.5A(Max) / 1.9A(Typ.) 0.11Ω(typ.) 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
94
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
95
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2HPN_GS Series 1008 (2520) inch (mm)
Appearance/Dimensions
2.5±0.2
2.0±0.2
0.6±0.2
0.9±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM2HPN2R2MGSp2.2μH ±20% 1MHz 1100mA 0.18Ω±25% 40MHz
LQM2HPN3R3MGSp3.3μH ±20% 1MHz 1050mA 0.21Ω±25% 20MHz
LQM2HPN4R7MGSp4.7μH ±20% 1MHz 1000mA 0.25Ω±25% 20MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
96
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
97
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2HPN_J0 Series 1008 (2520) inch (mm)
Appearance/Dimensions
1.1±0.1
2.0±0.2
2.5±0.2
0.6±0.2
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM2HPN1R0MJ0p1.0μH ±20% 1MHz 1500mA 0.09Ω±25% 70MHz
LQM2HPN2R2MJ0p2.2μH ±20% 1MHz 1000mA 0.12Ω±25% 40MHz
LQM2HPN3R3MJ0p3.3μH ±20% 1MHz 1000mA 0.12Ω±25% 30MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
98
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
99
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2HPN_JH Series 1008 (2520) inch (mm)
Appearance/Dimensions
1.1±0.1
2.0±0.2
2.5±0.2
0.6±0.2
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM2HPNR47MJHp0.47μH ±20% 1MHz 3.2A(Max) / 3.5A(Typ.) 2.7A(Max) / 3.4A(Typ.) 0.037Ω(typ.) 70MHz
LQM2HPN1R0MJHp1.0μH ±20% 1MHz 2.1A(Max) / 2.4A(Typ.) 2.3A(Max) / 2.9A(Typ.) 0.05Ω(typ.) 50MHz
LQM2HPN2R2MJHp2.2μH ±20% 1MHz 1.4A(Max) / 1.6A(Typ.) 1.5A(Max) / 1.9A(Typ.) 0.11Ω(typ.) 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self
heating will be 40°Cor less. Keep the temperature of product (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
100
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
101
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2MPN_DH Series 0806 (2016) inch (mm)
Appearance/Dimensions
0.5±0.2
2.0±0.15 1.6±0.15
0.6±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM2MPN2R2MDHp2.2μH ±20% 1MHz 0.63A(Max.) / 0.68A(Typ.) 1.27A(Max.) / 1.35A(Typ.) 0.2Ω(typ.) 40MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
102
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
103
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2MPN_EH Series 0806 (2016) inch (mm)
Appearance/Dimensions
2.0±0.2
0.5±0.2
1.6±0.2
0.7±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM2MPNR24MEHp0.24μH ±20% 1MHz 4.1A(Max) / 4.5A(Typ.) 2.6A(Max) / 3.3A(Typ.) 0.035Ω(typ.) 130MHz
LQM2MPNR47MEHp0.47μH ±20% 1MHz 2.3A(Max) / 2.5A(Typ.) 2.15A(Max) / 2.8A(Typ.) 0.05Ω(typ.) 80MHz
LQM2MPNR68MEHp0.68μH ±20% 1MHz 2.0A(Max) / 2.2A(Typ.) 1.75A(Max) / 2.3A(Typ.) 0.075Ω(typ.) 60MHz
LQM2MPN1R0MEHp1.0μH ±20% 1MHz 1.8A(Max) / 2.0A(Typ.) 1.5A(Max) / 2.0A(Typ.) 0.1Ω(typ.) 50MHz
LQM2MPN1R5MEHp1.5μH ±20% 1MHz 0.75A(Max) / 0.9A(Typ.) 1.6A(Max) / 2.1A(Typ.) 0.09Ω(typ.) 40MHz
LQM2MPN2R2MEHp2.2μH ±20% 1MHz 0.7A(Max) / 0.85A(Typ.) 1.1A(Max) / 1.45A(Typ.) 0.18Ω(typ.) 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
104
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
105
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2MPN_G0 Series 0806 (2016) inch (mm)
Appearance/Dimensions
(in mm)
2.0±0.15
1.6±0.15
0.5±0.2
0.9±0.1
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM2MPNR47MG0p0.47μH ±20% 1MHz 1.6A(Ambient temp.85°C)
1.2A(Ambient temp.125°C) 0.060Ω(typ.) 100MHz
LQM2MPNR47NG0p0.47μH ±30% 1MHz 1.6A(Ambient temp.85°C)
1.2A(Ambient temp.125°C) 0.060Ω(typ.) 100MHz
LQM2MPN1R0NG0p1.0μH ±30% 1MHz 1.4A(Ambient temp.85°C)
1.0A(Ambient temp.125°C) 0.085Ω(typ.) 60MHz
LQM2MPN1R5MG0p1.5μH ±20% 1MHz 1.2A(Ambient temp.85°C)
0.9A(Ambient temp.125°C) 0.11Ω(typ.) 50MHz
LQM2MPN1R5NG0p1.5μH ±30% 1MHz 1.2A(Ambient temp.85°C)
0.9A(Ambient temp.125°C) 0.11Ω(typ.) 50MHz
LQM2MPN2R2MG0p2.2μH ±20% 1MHz 1.2A(Ambient temp.85°C)
0.9A(Ambient temp.125°C) 0.11Ω(typ.) 40MHz
LQM2MPN2R2NG0p2.2μH ±30% 1MHz 1.2A(Ambient temp.85°C)
0.9A(Ambient temp.125°C) 0.11Ω(typ.) 40MHz
LQM2MPN3R3NG0p3.3μH ±30% 1MHz 1.2A(Ambient temp.85°C)
0.9A(Ambient temp.125°C) 0.12Ω(typ.) 30MHz
LQM2MPN4R7MG0p4.7μH ±20% 1MHz 1.1A(Ambient temp.85°C)
0.8A(Ambient temp.125°C) 0.14Ω(typ.) 20MHz
LQM2MPN4R7NG0p4.7μH ±30% 1MHz 1.1A(Ambient temp.85°C)
0.8A(Ambient temp.125°C) 0.14Ω(typ.) 20MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQM2MPN_G0 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C max.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
106
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.) Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQM2MP_G0 series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
Rated Current
at 85°C
Rated Current
at 125°C
0
12585
Rated Current (A)
Operating Temperature (°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
107
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM2MPN_GH Series 0806 (2016) inch (mm)
Appearance/Dimensions
(in mm)
2.0±0.2
0.5±0.2
1.6±0.2
0.9±0.1
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM2MPNR16MGHp0.16μH ±20% 1MHz 5.0A(Max) / 5.5A(Typ.) 4.0A(Max) / 5.0A(Typ.) 0.014Ω(typ.) 150MHz
LQM2MPNR24MGHp0.24μH ±20% 1MHz 4.8A(Max) / 5.0A(Typ.) 3.4A(Max) / 4.4A(Typ.) 0.02Ω(typ.) 130MHz
LQM2MPNR33MGHp0.33μH ±20% 1MHz 3.7A(Max) / 3.9A(Typ.) 3.1A(Max) / 4.0A(Typ.) 0.024Ω(typ.) 90MHz
LQM2MPNR47MGHp0.47μH ±20% 1MHz 3.4A(Max) / 3.6A(Typ.) 2.5A(Max) / 3.2A(Typ.) 0.037Ω(typ.) 80MHz
LQM2MPNR68MGHp0.68μH ±20% 1MHz 3.1A(Max) / 3.4A(Typ.) 1.9A(Max) / 2.5A(Typ.) 0.055Ω(typ.) 60MHz
LQM2MPN1R0MGHp1.0μH ±20% 1MHz 2.0A(Max) / 2.3A(Typ.) 1.9A(Max) / 2.4A(Typ.) 0.064Ω(typ.) 60MHz
LQM2MPN1R5MGHp1.5μH ±20% 1MHz 1.8A(Max) / 2.0A(Typ.) 1.5A(Max) / 1.9A(Typ.) 0.104Ω(typ.) 50MHz
LQM2MPN2R2MGHp2.2μH ±20% 1MHz 1.3A(Max) / 1.5A(Typ.) 1.0A(Max) / 1.3A(Typ.) 0.21Ω(typ.) 40MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
108
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
109
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM31PN_00 Series 1206 (3216) inch (mm)
Appearance/Dimensions
(in mm)
3.2±0.2
0.85±0.1
1.6±0.2
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM31PNR47M00p0.47μH ±20% 1MHz 1400mA 0.07Ω±25% 80MHz
LQM31PN1R0M00p1.0μH ±20% 1MHz 1200mA 0.12Ω±25% 60MHz
LQM31PN1R5M00p1.5μH ±20% 1MHz 1000mA 0.14Ω±25% 50MHz
LQM31PN2R2M00p2.2μH ±20% 1MHz 900mA 0.19Ω±25% 40MHz
LQM31PN3R3M00p3.3μH ±20% 1MHz 800mA 0.24Ω±25% 30MHz
LQM31PN4R7M00p4.7μH ±20% 1MHz 700mA 0.30Ω±25% 25MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
110
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
111
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM32PN_G0 Series 1210 (3225) inch (mm)
Appearance/Dimensions
(in mm)
3.2±0.15
0.9±0.1
2.5±0.15
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQM32PN1R0MG0p1.0μH ±20% 1MHz 1800mA 0.048Ω±25% 40MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
112
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM32PN_GC Series 1210 (3225) inch (mm)
Appearance/Dimensions
(in mm)
3.2±0.15
0.9±0.1
2.5±0.15
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM32PN1R0MGCp1.0μH ±20% 1MHz 2.2A(Max.) / 2.9A(Typ.) 1.8A(Max.) / 2.4A(Typ.) 0.043Ω(Typ.) 60MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self
heating will be 40°Cor less. Keep the temperature of product (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
113
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Temperature Rise Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
114
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQW15CN_00 Series 0402 (1005) inch (mm)
Appearance/Dimensions
(in mm)
0.5±0.1
0.5±0.1
0.55±0.1
1.0±0.1
0.3±0.1 0.3±0.1
(0.1)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15CN18NJ00p18nH ±5% 100MHz 1400mA 0.046Ω 3000MHz
LQW15CN33NJ00p33nH ±5% 100MHz 1300mA 0.065Ω 1800MHz
LQW15CN48NJ00p48nH ±5% 100MHz 1100mA 0.078Ω 1400MHz
LQW15CN70NJ00p70nH ±5% 100MHz 820mA 0.12Ω 1300MHz
LQW15CN96NJ00p96nH ±5% 100MHz 730mA 0.16Ω 1100MHz
LQW15CNR13J00p130nH ±5% 100MHz 640mA 0.23Ω 1000MHz
LQW15CNR16J00p160nH ±5% 100MHz 480mA 0.33Ω 900MHz
LQW15CNR20J00p200nH ±5% 100MHz 390mA 0.47Ω 800MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15C series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
115
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Notice (Rating)
Derating of Rated Current
0
50
100
Rated Derating (%)
Operating Temperature (°C)
125850
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQW15C series.
Please apply the derating curve shown in the chart
according to the operating temperature.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
116
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQW15CN_10 Series 0402 (1005) inch (mm)
Appearance/Dimensions
1.0±0.1
0.3±0.1
(0.1)
0.6±0.050.5±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15CN20NJ10p20nH ±5% 100MHz 2200mA 0.028Ω 3000MHz
LQW15CN20NK10p20nH ±10% 100MHz 2200mA 0.028Ω 3000MHz
LQW15CN34NJ10p34nH ±5% 100MHz 1800mA 0.036Ω 2500MHz
LQW15CN34NK10p34nH ±10% 100MHz 1800mA 0.036Ω 2500MHz
LQW15CN53NJ10p53nH ±5% 100MHz 1300mA 0.06Ω 2000MHz
LQW15CN53NK10p53nH ±10% 100MHz 1300mA 0.06Ω 2000MHz
LQW15CN77NJ10p77nH ±5% 100MHz 1100mA 0.09Ω 2000MHz
LQW15CN77NK10p77nH ±10% 100MHz 1100mA 0.09Ω 2000MHz
LQW15CNR11J10p106nH ±5% 100MHz 850mA 0.144Ω 1500MHz
LQW15CNR11K10p106nH ±10% 100MHz 850mA 0.144Ω 1500MHz
LQW15CNR14J10p140nH ±5% 100MHz 650mA 0.216Ω 1000MHz
LQW15CNR14K10p140nH ±10% 100MHz 650mA 0.216Ω 1000MHz
LQW15CNR18J10p180nH ±5% 100MHz 560mA 0.312Ω 1000MHz
LQW15CNR18K10p180nH ±10% 100MHz 560mA 0.312Ω 1000MHz
LQW15CNR22J10p220nH ±5% 100MHz 450mA 0.47Ω 1400MHz
LQW15CNR22K10p220nH ±10% 100MHz 450mA 0.47Ω 1400MHz
LQW15CNR27J10p270nH ±5% 100MHz 420mA 0.52Ω 830MHz
LQW15CNR27K10p270nH ±10% 100MHz 420mA 0.52Ω 830MHz
LQW15CNR33J10p330nH ±5% 100MHz 390mA 0.56Ω 520MHz
LQW15CNR33K10p330nH ±10% 100MHz 390mA 0.56Ω 520MHz
LQW15CNR39J10p390nH ±5% 100MHz 370mA 0.62Ω 450MHz
LQW15CNR39K10p390nH ±10% 100MHz 370mA 0.62Ω 450MHz
LQW15CNR42J10p420nH ±5% 10MHz 370mA 0.62Ω 400MHz
LQW15CNR42K10p420nH ±10% 10MHz 370mA 0.62Ω 400MHz
LQW15CNR47J10p470nH ±5% 10MHz 350mA 0.66Ω 380MHz
LQW15CNR47K10p470nH ±10% 10MHz 350mA 0.66Ω 380MHz
LQW15CNR56J10p560nH ±5% 10MHz 300mA 0.71Ω 300MHz
LQW15CNR56K10p560nH ±10% 10MHz 300mA 0.71Ω 300MHz
LQW15CNR68M10p680nH ±20% 1MHz 290mA 0.78Ω 290MHz
LQW15CNR82M10p820nH ±20% 1MHz 275mA 0.84Ω 200MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15C series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
117
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15CN1R0M10p1000nH ±20% 1MHz 270mA 0.94Ω 120MHz
LQW15CN1R5M10p1500nH ±20% 1MHz 190mA 1.50Ω 120MHz
LQW15CN2R2M10p2200nH ±20% 1MHz 170mA 1.80Ω 100MHz
LQW15CN3R3M10p3300nH ±20% 1MHz 130mA 3.65Ω 80MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15C series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.)
Notice (Rating)
Derating of Rated Current
0
50
100
Rated Derating (%)
Operating Temperature (°C)
125850
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQW15C series.
Please apply the derating curve shown in the chart
according to the operating temperature.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
118
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQW18CN_00 Series 0603 (1608) inch (mm)
Appearance/Dimensions
0.8±0.15
1.6±0.15 0.8±0.15
0.4±0.10.4±0.1
(0.2)
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18CN4N9D00p4.9nH ±0.5nH 10MHz 2600mA 0.015Ω 2300MHz
LQW18CN15NJ00p15nH ±5% 10MHz 2200mA 0.025Ω 2000MHz
LQW18CN33NJ00p33nH ±5% 10MHz 1700mA 0.035Ω 1800MHz
LQW18CN55NJ00p55nH ±5% 10MHz 1500mA 0.045Ω 1600MHz
LQW18CN85NJ00p85nH ±5% 10MHz 1400mA 0.060Ω 1380MHz
LQW18CNR10K00p100nH ±10% 10MHz 1000mA 0.10Ω 1260MHz
LQW18CNR12J00p120nH ±5% 10MHz 1100mA 0.085Ω 1200MHz
LQW18CNR16J00p160nH ±5% 10MHz 1000mA 0.10Ω 900MHz
LQW18CNR21J00p210nH ±5% 10MHz 800mA 0.15Ω 720MHz
LQW18CNR27J00p270nH ±5% 10MHz 750mA 0.16Ω 660MHz
LQW18CNR33J00p330nH ±5% 10MHz 630mA 0.25Ω 600MHz
LQW18CNR39J00p390nH ±5% 10MHz 620mA 0.28Ω 570MHz
LQW18CNR47J00p470nH ±5% 10MHz 500mA 0.45Ω 555MHz
LQW18CNR56J00p560nH ±5% 10MHz 450mA 0.48Ω 540MHz
LQW18CNR65J00p650nH ±5% 10MHz 430mA 0.52Ω 510MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
119
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
120
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH31CN_03 Series 1206 (3216) inch (mm)
Appearance/Dimensions
2.3±0.2
1.8±0.2
1.6±0.2
1.6±0.2
3.2±0.3
0.7min. 0.7min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH31CNR12M03p0.12μH ±20% 1MHz 970mA 0.08Ω±40% 250MHz
LQH31CNR22M03p0.22μH ±20% 1MHz 850mA 0.10Ω±40% 250MHz
LQH31CNR47M03p0.47μH ±20% 1MHz 700mA 0.15Ω±40% 180MHz
LQH31CN1R0M03p1.0μH ±20% 1MHz 510mA 0.28Ω±30% 100MHz
LQH31CN2R2M03p2.2μH ±20% 1MHz 430mA 0.41Ω±30% 50MHz
LQH31CN4R7M03p4.7μH ±20% 1MHz 340mA 0.65Ω±30% 31MHz
LQH31CN100K03p10μH ±10% 1MHz 230mA 1.3Ω±30% 20MHz
LQH31CN220K03p22μH ±10% 1MHz 160mA 3.0Ω±30% 14MHz
LQH31CN470K03p47μH ±10% 1MHz 100mA 8.0Ω±30% 10MHz
LQH31CN101K03p100μH ±10% 1MHz 80mA 12.0Ω±30% 7MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 35°C max.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
121
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
122
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH32CN_23 Series 1210 (3225) inch (mm)
Appearance/Dimensions
2.5±0.2
2.0±0.2
2.5±0.23.2±0.3
0.9±0.3
0.9±0.3
2.5±0.2 2.5±0.2
A
A: 2.8 max.
* Please refer to dimension A for
LQH32CN_33 (2R2M, 4R7M, 100K)
types. (See Fig. 1)
Fig. 1
2.5±0.2
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH32CN1R0M23p1.0μH ±20% 1MHz 800mA 0.09Ω±30% 96MHz
LQH32CN2R2M23p2.2μH ±20% 1MHz 600mA 0.13Ω±30% 64MHz
LQH32CN4R7M23p4.7μH ±20% 1MHz 450mA 0.2Ω±30% 43MHz
LQH32CN100K23p10μH ±10% 1MHz 300mA 0.44Ω±30% 26MHz
LQH32CN220K23p22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz
LQH32CN470K23p47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz
LQH32CN101K23p100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz
LQH32CN221K23p220μH ±10% 1MHz 70mA 8.4Ω±30% 6.8MHz
LQH32CN331K23p330μH ±10% 1MHz 60mA 10.0Ω±30% 5.6MHz
LQH32CN391K23p390μH ±10% 1MHz 60mA 17Ω±30% 5.0MHz
LQH32CN471K23p470μH ±10% 1kHz 60mA 19Ω±30% 5.0MHz
LQH32CN561K23p560μH ±10% 1kHz 60mA 22.0Ω±30% 5.0MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
123
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
124
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH32CN_33 Series 1210 (3225) inch (mm)
Appearance/Dimensions
2.5±0.2
2.0±0.2
2.5±0.23.2±0.3
0.9±0.3
0.9±0.3
2.5±0.2 2.5±0.2
A
A: 2.8 max.
* Please refer to dimension A for
LQH32CN_33 (2R2M, 4R7M, 100K)
types. (See Fig. 1)
Fig. 1
2.5±0.2
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH32CNR15M33p0.15μH ±20% 1MHz 1450mA 0.028Ω±30% 400MHz
LQH32CNR27M33p0.27μH ±20% 1MHz 1250mA 0.034Ω±30% 250MHz
LQH32CNR47M33p0.47μH ±20% 1MHz 1100mA 0.042Ω±30% 150MHz
LQH32CN1R0M33p1.0μH ±20% 1MHz 1000mA 0.06Ω±30% 100MHz
LQH32CN2R2M33p2.2μH ±20% 1MHz 790mA 0.097Ω±30% 64MHz
LQH32CN4R7M33p4.7μH ±20% 1MHz 650mA 0.15Ω±30% 43MHz
LQH32CN100K33p10μH ±10% 1MHz 450mA 0.3Ω±30% 26MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
125
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
126
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH32CN_53 Series 1210 (3225) inch (mm)
Appearance/Dimensions
2.5±0.2 2.5±0.2
1.55±0.15
2.5±0.2
3.2±0.3
A : 2.8 max.
A
0.9±0.3 0.9±0.3
A
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH32CN1R0M53p1.0μH ±20% 1MHz 1000mA 0.060Ω±30% 100MHz
LQH32CN2R2M53p2.2μH ±20% 1MHz 790mA 0.097Ω±30% 64MHz
LQH32CN3R3M53p3.3μH ±20% 1MHz 710mA 0.12Ω±30% 50MHz
LQH32CN4R7M53p4.7μH ±20% 1MHz 650mA 0.15Ω±30% 43MHz
LQH32CN6R8M53p6.8μH ±20% 1MHz 540mA 0.25Ω±30% 32MHz
LQH32CN100K53p10μH ±10% 1MHz 450mA 0.30Ω±30% 26MHz
LQH32CN150K53p15μH ±10% 1MHz 300mA 0.58Ω±30% 26MHz
LQH32CN220K53p22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz
LQH32CN330K53p33μH ±10% 1MHz 200mA 1.1Ω±30% 17MHz
LQH32CN470K53p47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz
LQH32CN680K53p68μH ±10% 1MHz 130mA 2.2Ω±30% 12MHz
LQH32CN101K53p100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
127
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
128
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH32DN_23 Series 1210 (3225) inch (mm)
Appearance/Dimensions
2.5±0.2 2.5±0.2
2.0±0.2
2.5±0.2
0.9±0.30.9±0.3
3.2±0.3
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.) Operating temp. range
LQH32DN1R0M23p1.0μH ±20% 1MHz 800mA 0.09Ω±30% 96MHz -40 to 105°C
LQH32DN2R2M23p2.2μH ±20% 1MHz 600mA 0.13Ω±30% 64MHz -40 to 105°C
LQH32DN3R3M23p3.3μH ±20% 1MHz 530mA 0.20Ω±30% 50MHz -40 to 105°C
LQH32DN4R7M23p4.7μH ±20% 1MHz 450mA 0.20Ω±30% 43MHz -40 to 105°C
LQH32DN100K23p10μH ±10% 1MHz 300mA 0.44Ω±30% 26MHz -40 to 105°C
LQH32DN220K23p22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz -40 to 105°C
LQH32DN390K23p39μH ±10% 1MHz 200mA 1.2Ω±30% 16MHz -40 to 105°C
LQH32DN470K23p47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz -40 to 105°C
LQH32DN680K23p68μH ±10% 1MHz 130mA 2.2Ω±30% 12MHz -40 to 105°C
LQH32DN101K23p100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz -40 to 105°C
LQH32DN151K23p150μH ±10% 1MHz 80mA 5.1Ω±30% 8.0MHz -40 to 105°C
LQH32DN221K23p220μH ±10% 1MHz 70mA 8.4Ω±30% 6.8MHz -40 to 105°C
LQH32DN331K23p330μH ±10% 1MHz 60mA 10.0Ω±30% 5.6MHz -40 to 105°C
LQH32DN391K23p390μH ±10% 1MHz 60mA 17Ω±30% 5MHz -40 to 85°C
LQH32DN471K23p470μH ±10% 1kHz 60mA 19Ω±30% 5MHz -40 to 85°C
LQH32DN561K23p560μH ±10% 1kHz 60mA 22Ω±30% 5MHz -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
129
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
130
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH32DN_53 Series 1210 (3225) inch (mm)
Appearance/Dimensions
2.5±0.2 2.5±0.2
2.0±0.2
2.5±0.2
0.9±0.30.9±0.3
3.2±0.3
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32DN1R0M53p1.0μH ±20% 1MHz 1000mA 0.060Ω±30% 100MHz
LQH32DN2R2M53p2.2μH ±20% 1MHz 790mA 0.097Ω±30% 64MHz
LQH32DN3R3M53p3.3μH ±20% 1MHz 710mA 0.12Ω±30% 50MHz
LQH32DN4R7M53p4.7μH ±20% 1MHz 650mA 0.15Ω±30% 43MHz
LQH32DN6R8M53p6.8μH ±20% 1MHz 540mA 0.25Ω±30% 32MHz
LQH32DN100K53p10μH ±10% 1MHz 450mA 0.30Ω±30% 26MHz
LQH32DN150K53p15μH ±10% 1MHz 300mA 0.58Ω±30% 26MHz
LQH32DN220K53p22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz
LQH32DN330K53p33μH ±10% 1MHz 200mA 1.1Ω±30% 17MHz
LQH32DN470K53p47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz
LQH32DN680K53p68μH ±10% 1MHz 130mA 2.2Ω±30% 12MHz
LQH32DN101K53p100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz
Operating temp. range: -40 to 105°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
131
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
132
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH43CN_03 Series 1812 (4532) inch (mm)
Appearance/Dimensions
3.6±0.2
4.5±0.3
2.6±0.2
3.2±0.2
3.2±0.2
1.0min. 1.0min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQH43CN1R0M03p1.0μH ±20% 1MHz 1080mA 0.08Ω 100MHz
LQH43CN1R5M03p1.5μH ±20% 1MHz 1000mA 0.09Ω 85MHz
LQH43CN2R2M03p2.2μH ±20% 1MHz 900mA 0.11Ω 60MHz
LQH43CN3R3M03p3.3μH ±20% 1MHz 800mA 0.13Ω 47MHz
LQH43CN4R7M03p4.7μH ±20% 1MHz 750mA 0.15Ω 35MHz
LQH43CN6R8M03p6.8μH ±20% 1MHz 720mA 0.20Ω 30MHz
LQH43CN100K03p10μH ±10% 1MHz 650mA 0.24Ω 23MHz
LQH43CN150K03p15μH ±10% 1MHz 570mA 0.32Ω 20MHz
LQH43CN220K03p22μH ±10% 1MHz 420mA 0.6Ω 15MHz
LQH43CN330K03p33μH ±10% 1MHz 310mA 1.0Ω 12MHz
LQH43CN470K03p47μH ±10% 1MHz 280mA 1.1Ω 10MHz
LQH43CN680K03p68μH ±10% 1MHz 220mA 1.7Ω 8.4MHz
LQH43CN101K03p100μH ±10% 1MHz 190mA 2.2Ω 6.8MHz
LQH43CN151K03p150μH ±10% 1MHz 130mA 3.5Ω 5.5MHz
LQH43CN221K03p220μH ±10% 1MHz 110mA 4.0Ω 4.5MHz
LQH43CN331K03p330μH ±10% 1MHz 100mA 6.8Ω 3.6MHz
LQH43CN471K03p470μH ±10% 1kHz 90mA 8.5Ω 3.0MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
133
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
134
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH43CN_33 Series 1812 (4532) inch (mm)
Appearance/Dimensions
3.6±0.2
4.5±0.3
2.6±0.2
3.2±0.2
3.2±0.2
1.0min. 1.0min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH43CNR56M33p0.56μH ±20% 1MHz 2950mA 0.023Ω±30% 160MHz
LQH43CNR82M33p0.82μH ±20% 1MHz 2800mA 0.027Ω±30% 130MHz
LQH43CN1R0M33p1.0μH ±20% 1MHz 2600mA 0.032Ω±30% 110MHz
LQH43CN1R5M33p1.5μH ±20% 1MHz 2450mA 0.036Ω±30% 80MHz
LQH43CN1R8M33p1.8μH ±20% 1MHz 2300mA 0.042Ω±30% 70MHz
LQH43CN2R2M33p2.2μH ±20% 1MHz 2100mA 0.047Ω±30% 60MHz
LQH43CN2R7M33p2.7μH ±20% 1MHz 1800mA 0.053Ω±30% 50MHz
LQH43CN3R3M33p3.3μH ±20% 1MHz 1650mA 0.076Ω±30% 47MHz
LQH43CN3R9M33p3.9μH ±20% 1MHz 1600mA 0.082Ω±30% 40MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±20% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
135
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
136
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH55DN_03 Series 2220 (5750) inch (mm)
Appearance/Dimensions
4.7±0.3
5.0±0.3 5.0±0.3
5.7±0.3
1.3
min.
1.3
min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 1500
Lø180mm Embossed Taping 350
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH55DNR12M03p0.12μH ±20% 1MHz 6.0A 0.007Ω±40% 450MHz
LQH55DNR27M03p0.27μH ±20% 1MHz 5.3A 0.010Ω±40% 300MHz
LQH55DNR47M03p0.47μH ±20% 1MHz 4.8A 0.013Ω±40% 200MHz
LQH55DN1R0M03p1.0μH ±20% 1MHz 4.0A 0.019Ω±40% 150MHz
LQH55DN1R5M03p1.5μH ±20% 1MHz 3.7A 0.022Ω±40% 110MHz
LQH55DN2R2M03p2.2μH ±20% 1MHz 3.2A 0.029Ω±40% 80MHz
LQH55DN3R3M03p3.3μH ±20% 1MHz 2.9A 0.036Ω±40% 40MHz
LQH55DN4R7M03p4.7μH ±20% 1MHz 2.7A 0.041Ω±40% 30MHz
LQH55DN6R8M03p6.8μH ±20% 1MHz 2.0A 0.074Ω±40% 25MHz
LQH55DN100M03p10μH ±20% 1MHz 1.7A 0.093Ω±40% 20MHz
LQH55DN150M03p15μH ±20% 1MHz 1.4A 0.15Ω±40% 17MHz
LQH55DN220M03p22μH ±20% 1MHz 1.2A 0.19Ω±40% 15MHz
LQH55DN330M03p33μH ±20% 1MHz 0.9A 0.32Ω±40% 12MHz
LQH55DN470M03p47μH ±20% 1MHz 0.8A 0.40Ω±40% 10MHz
LQH55DN680M03p68μH ±20% 1MHz 0.64A 0.67Ω±40% 7.6MHz
LQH55DN101M03p100μH ±20% 100kHz 0.56A 0.86Ω±40% 6.5MHz
LQH55DN151M03p150μH ±20% 100kHz 0.42A 1.9Ω±40% 5.0MHz
LQH55DN221M03p220μH ±20% 100kHz 0.32A 2.4Ω±40% 4.0MHz
LQH55DN331M03p330μH ±20% 100kHz 0.27A 4.4Ω±40% 3.1MHz
LQH55DN471M03p470μH ±20% 100kHz 0.24A 5.4Ω±40% 2.4MHz
LQH55DN681M03p680μH ±20% 100kHz 0.19A 8.1Ω±40% 1.9MHz
LQH55DN102M03p1000μH ±20% 10kHz 0.15A 10.3Ω±40% 1.7MHz
LQH55DN222M03p2200μH ±20% 10kHz 0.10A 21.5Ω±40% 1.2MHz
LQH55DN472M03p4700μH ±20% 10kHz 0.07A 43.6Ω±40% 0.8MHz
LQH55DN103M03p10000μH ±20% 10kHz 0.05A 100Ω±40% 0.5MHz
Operating temp. range (Self-temp. rise not included): -40 to 80°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±40% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
137
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
138
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQH66SN_03 Series 2525 (6363) inch (mm)
Appearance/Dimensions
4.7±0.3
6.3±0.3 6.3±0.3
6.3±0.3
(in mm)
1.3
min.
1.3
min.
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 1500
Lø180mm Embossed Taping 350
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH66SNR27M03p0.27μH ±20% 1MHz 6.0A 0.007Ω±40% 300MHz
LQH66SNR68M03p0.68μH ±20% 1MHz 5.3A 0.010Ω±40% 180MHz
LQH66SN1R0M03p1.0μH ±20% 1MHz 4.7A 0.013Ω±40% 150MHz
LQH66SN1R5M03p1.5μH ±20% 1MHz 3.8A 0.016Ω±40% 110MHz
LQH66SN2R2M03p2.2μH ±20% 1MHz 3.3A 0.019Ω±40% 80MHz
LQH66SN3R3M03p3.3μH ±20% 1MHz 2.6A 0.022Ω±40% 40MHz
LQH66SN4R7M03p4.7μH ±20% 1MHz 2.2A 0.025Ω±40% 30MHz
LQH66SN6R8M03p6.8μH ±20% 1MHz 1.8A 0.029Ω±40% 25MHz
LQH66SN100M03p10μH ±20% 1MHz 1.6A 0.036Ω±40% 20MHz
LQH66SN150M03p15μH ±20% 1MHz 1.3A 0.069Ω±40% 17MHz
LQH66SN220M03p22μH ±20% 1MHz 1.1A 0.087Ω±40% 15MHz
LQH66SN330M03p33μH ±20% 1MHz 0.86A 0.14Ω±40% 12MHz
LQH66SN470M03p47μH ±20% 1MHz 0.76A 0.17Ω±40% 10MHz
LQH66SN680M03p68μH ±20% 1MHz 0.60A 0.29Ω±40% 7.6MHz
LQH66SN101M03p100μH ±20% 100kHz 0.52A 0.36Ω±40% 6.5MHz
LQH66SN151M03p150μH ±20% 100kHz 0.42A 0.63Ω±40% 5.0MHz
LQH66SN221M03p220μH ±20% 100kHz 0.35A 0.79Ω±40% 4.0MHz
LQH66SN331M03p330μH ±20% 100kHz 0.28A 1.8Ω±40% 3.2MHz
LQH66SN471M03p470μH ±20% 100kHz 0.24A 2.2Ω±40% 2.5MHz
LQH66SN681M03p680μH ±20% 100kHz 0.20A 3.9Ω±40% 2.0MHz
LQH66SN102M03p1000μH ±20% 10kHz 0.16A 4.9Ω±40% 1.7MHz
LQH66SN222M03p2200μH ±20% 10kHz 0.10A 9.4Ω±40% 1.2MHz
LQH66SN472M03p4700μH ±20% 10kHz 0.07A 19.5Ω±40% 0.8MHz
LQH66SN103M03p10000μH ±20% 10kHz 0.05A 39.7Ω±40% 0.5MHz
Operating temp. range (Self-temp. rise not included): -40 to 80°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±40% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
139
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
140
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM18FN_00 Series 0603 (1608) inch (mm)
Appearance/Dimensions
(in mm)
1.6±0.1
0.8±0.1
0.8±0.1
0.3±0.2
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM18FN1R0M00p1.0μH ±20% 1MHz 150mA 0.20Ω±30% 120MHz
LQM18FN2R2M00p2.2μH ±20% 1MHz 120mA 0.40Ω±30% 80MHz
LQM18FN4R7M00p4.7μH ±20% 1MHz 80mA 0.60Ω±30% 50MHz
LQM18FN100M00p10μH ±20% 1MHz 50mA 0.90Ω±30% 30MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
141
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
142
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21DN_00 Series 0805 (2012) inch (mm)
Appearance/Dimensions
(in mm)
Inductance: 1.0 to 10μH
Dimension of t Inductance: 22 to 47μH
0.85±0.2
1.25±0.2
2.0±0.2 1.25±0.2
0.5±0.3
t
Packaging (Inductance: 1.0µH to 10µH)
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 1000
Packaging (Inductance: 22µH to 47µH)
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 10000
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Itemp)* Max. of DC Resistance S.R.F.* (min.)
LQM21DN1R0N00p1.0μH ±30% 1MHz 60mA 0.10Ω 75MHz
LQM21DN2R2N00p2.2μH ±30% 1MHz 40mA 0.17Ω 50MHz
LQM21DN4R7N00p4.7μH ±30% 1MHz 30mA 0.30Ω 35MHz
LQM21DN100N00p10μH ±30% 1MHz 15mA 0.50Ω 24MHz
LQM21DN220N00p22μH ±30% 1MHz 13mA 0.65Ω 16MHz
LQM21DN470N00p47μH ±30% 1MHz 7.0mA 1.20Ω 7.5MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Ferrite Core
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
143
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
144
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21FN_00 Series 0805 (2012) inch (mm)
Appearance/Dimensions
t
(in mm)
Inductance: 1.0 to 2.2μH
Dimension of t Inductance: 4.7 to 47μH
0.85±0.2
1.25±0.2
2.0±0.2 1.25±0.2
0.5±0.3
Packaging (Inductance: 1.0µH to 2.2µH)
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 1000
Packaging (Inductance: 4.7µH to 47µH)
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 10000
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM21FN1R0N00p1.0μH ±30% 1MHz 220mA 0.20Ω±30% 105MHz
LQM21FN2R2N00p2.2μH ±30% 1MHz 150mA 0.28Ω±30% 70MHz
LQM21FN4R7N00p4.7μH ±30% 1MHz 80mA 0.30Ω±30% 25MHz
LQM21FN100N00p10μH ±30% 1MHz 60mA 0.50Ω±30% 15MHz
LQM21FN220N00p22μH ±30% 1MHz 13mA 0.35Ω±30% 15MHz
LQM21FN470N00p47μH ±30% 1MHz 7.0mA 0.60Ω±30% 7.5MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Ferrite Core
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
145
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
146
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21FN_70 Series 0805 (2012) inch (mm)
Appearance/Dimensions
2.0±0.2
1.25±0.2
1.25±0.2
0.5±0.3
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM21FN4R7M70p4.7μH ±20% 1MHz 120mA 0.35Ω±30% 25MHz
LQM21FN100M70p10μH ±20% 1MHz 100mA 0.60Ω±30% 15MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
147
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
148
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines
LQM21FN_80 Series 0805 (2012) inch (mm)
Appearance/Dimensions
2.0±0.2
1.25±0.2
1.25±0.2
0.5±0.3
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 10000
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQM21FN4R7M80p4.7μH ±20% 1MHz 120mA 0.18Ω±30% 25MHz
LQM21FN100M80p10μH ±20% 1MHz 100mA 0.30Ω±30% 15MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
149
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
150
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines !Caution/Notice
Rating
Storage and Operating Condition
Handling
1. About the Rated Current
Do not use products beyond the rated current as this may
create excessive heat and deteriorate the insulation
resistance.
2. About Excessive Surge Current
Surge current (pulse current or rush current) greater than
the specified rated current applied to the product may
cause a critical failure, such as an open circuit or burnout
caused by excessive temperature rise.
Please contact us in advance if applying a surge current.
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
<Storage Requirements>
1. Storage Period
The LQM series should be used within 6 months; the other
products should be used within 12 months.
Check solderability if this period is exceeded.
2. Storage Conditions
(1) Store products in a warehouse in compliance with the
following conditions:
Temperature: -10 to +40°C.
Humidity: 15 to 85% (relative humidity)
Do not subject products to rapid changes in
temperature and humidity.
Do not store them in a chemical atmosphere such as
one containing sulfurous acid gas or alkaline gas.
This will prevent electrode oxidation, which causes
poor solderability and possible corrosion of inductors.
(2) Do not store products in bulk packaging to prevent
collision among inductors, which causes core chipping
and wire breakage.
(3) Store products on pallets to protect from humidity,
dust, etc.
(4) Avoid heat shock, vibration, direct sunlight, etc.
This item is designed to have sucient strength, but handle
with care to avoid chipping or breaking its ceramic
structure.
LQW_C series
a To prevent breaking the wire, avoid touching with sharp
materials, such as tweezers or other materials such as
the bristles of a cleaning brush, to the wire wound
portion.
a To prevent breaking the core, avoid applying excessive
mechanical shock to products mounted on the board.
a In some mounting machines, when picking up
components, a support pin pushes the components up
from the bottom of the base tape. In this case, please
remove the support pin. The support pin may damage
the components and break the wire.
a In rare cases, the laser recognition cannot recognize this
component. Please contact us when you use laser
recognizion. (There is no problem with the permeation
and reflection type.)
a The product temperature rises about 40°C maximum
when the permissible current is applied to
LQW15C/LQW18C. Please use caution regarding the
temperature of the substrate and air around the part.
LQH_C/D/H/M/N/P series
a To prevent breaking the wire, avoid touching with sharp
materials, such as tweezers or the bristles of a cleaning
brush, to the wire wound portion of this product.
a To prevent breaking the core, avoid applying excessive
mechanical shock to products mounted on the board.
a Temperature may rise up to max. 40°C when applying
the rated current to Inductors for Power Lines. Use
caution regarding the temperature rating of the circuit
board and components around the chip Inductors.
LQM series
a There is the possibility that magnetism may change the
inductance value. Do not use a magnet or tweezers
with magnetism when handling chip inductors. (The tip
of the tweezers should be molded with resin or
pottery.)
a When the excessive current over rated current is
applied, it may cause the inductance value to change
due to magnetism.
<Transportation>
Do not apply excessive vibration or mechanical shock to
products.
Continued on the following page.
!Caution
Notice
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
151
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Measuring Method
Inductors for Power Lines !Caution/Notice
Measuring Method of Inductance/Q
1. Residual elements and stray elements of test fixtures can
be described by F-parameter as shown in the following:
3. Thus, the relation between Zx and Zm is shown in the
following:
<Resin Coating>
When coating products with resin, the relatively high resin
curing stress may change inductance values.
For exterior coating, select resin carefully so that
electrical and mechanical performance of the product is
not aected. Prior to use, please evaluate reliability with
the product mounted in your application set.
(LQW, LQH series)
An open circuit issue may occur by mechanical stress
caused by the resin, amount/cured shape of resin, or
operating conditions, etc. Some resins containing
impurities or chloride may possibly generate chlorine by
hydrolysis under some operating conditions, causing
corrosion of the inductor wire and leading to an open
circuit.
<Rated Current>
(LQH2HP_GR/JR, LQH2MPN_GR, LQH3NP_GR/JR/ME,
LQH44P_GR, LQH5BPN_38 Series)
When rated current is applied to the products,
Inductance will be within ±30% of specified inductance
value range.
(Other LQH_P Series except for LQH2HP_G0 Series)
When rated current is applied to the products,
Inductance will be within ±30% of nominal inductance
value.
a Rated Current Based on Temperature Rise
For LQH2MC series and LQH_P series, rated current is
set to keep the temperature rise caused by self heating
40°C or less.
For other Inductors for Power Lines, please refer to
individual specifications.
<Handling of a Substrate>
Aer mounting products on a substrate, do not apply any
stress to the product caused by bending or twisting the
substrate when cropping the substrate, inserting and
removing a connector from the substrate, or tightening a
screw to the substrate.
Excessive mechanical stress may cause cracking in the
Product.
Bending Twisting
V1A
=B
I1CD
V2
I2
AB
CD
Zm Zx
V1V2
I1I2
ProductTest fixtureTest Head
Zm - β
1 - ZmΓ
Zx = α
where, α = D / A = 1
β = B / D = Zsm - (1 - Yom Zsm) Zss
Γ = C / A = Yom
Zsm: measured impedance of short chip
Zss: residual impedance of short chip*
Yom: measured admittance when opening the fixture
*Residual inductance of short chip
0.556nH
0.771nH
LQW15C
LQW18C
Residual
Inductance Series
2. The impedance of chip inductors (chip coils) Zx and
measured value Zm can be described by input/output
current/voltage.
V1
I1,
Zm = V2
I2
Zx =
4. Lx and Qx should be calculated with the following
equation.
Lx: Inductance of chip Inductors (chip coils)
Qx: Q of chip Inductors (chip coils)
f: Measuring frequency
,
Im (Zx)
2πf
Lx = Im (Zx)
Re (Zx)
Qx =
Continued from the preceding page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
152
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Soldering and Mounting
Continued on the following page.
Land PatternLand Pattern + Solder Resist Solder Resist
(in mm)
Standard Land DimensionsSeries
LQM18F/18P
(Except for LQM18P_CH/FH/GH)
LQM21D/21F/21P
(Except for
LQM21P_CA/CH/
EH/GH)
LQM2MP
(Except for LQM2MP_GH)
LQM2HP
(Except for LQM2HP_CH/
EH/GH/JH)
LQM31P
LQM32P
LQH2MC
LQH31C
LQH32P
LQH44P_P0/J0/GR
LQH5BP
LQH55D/66S
LQW15CN_00
LQW15C_10
LQW18C
LQM18P_CH/FH/GH
LQM21P_CA/CH/EH/GH
LQM2MP_GH
LQM2HP_CH/EH/GH/JH
LQM21D/21F/21P
LQM2MP
LQM2HP
LQM31P
LQM32P
LQH2MC
LQH31C
LQH32P
LQM18F/18P Flow
Reflow 0.7
1.0
1.8
1.5
1.2
2.7
1.0
1.5
2.0
Part Number a
2.2-2.6
1.8-2.0
3.0-4.0
2.4
3.0
4.2-5.2
3.6
2.6
4.5
3.8
b
0.7
1.2
0.8
1.6
2.0
1.9
0.8
1.0
1.3
c
LQH44P_P0
LQH44P_J0/GR
LQH5BP
LQH55D/66S
LQW15CN_00
LQW15C_10
LQW18C
3.0
2.7
4.1
3.5
0.6
0.66
1.0
−
−
−
−
−
−
−
−
−
d
−
−
1.85
−
−
−
−
4.4
4.4
5.5
8.0
1.4
1.4
2.2
1.3
1.5
1.8
2.0
0.4
0.4
0.7
LQM18P_CH
LQM18P_FH
LQM18P_GH
LQM21P_CA
LQM21P_CH
LQM21P_EH
LQM21P_GH
LQM2MP_GH
LQM2HP_CH
LQM2HP_EH
LQM2HP_GH
LQM2HP_JH
Part Number Rated
Current
(A)
0.7
0.7
0.7
1.2
1.2
1.2
0.8
1.6
1.6
1.6
1.6
1.8-2.0
1.8-2.0
1.8-2.0
3.0-4.0
3.0-4.0
3.0-4.0
2.4
3.0
3.0
3.0
3.0
0.7
0.7
0.7
1.0
1.0
1.0
1.8
1.5
1.5
1.5
1.5
a
0-0.7
0.7-1.05
0-0.7
0.7-1.7
0-0.7
0.7-1.15
−
0-1.0
1.0-1.5
1.5-
0-1.0
1.0-1.5
1.5-3.1
0-1.5
1.5-2.5
2.5-5.0
0-1.5
1.5-3.0
0-1.5
1.5-3.0
3.0-5.0
0-1.5
1.5-2.6
3.3-4.2
0-1.6
1.6-2.4
2.4-3.5
b c
0.7
1.1
0.7
1.4
0.7
1.2
1.3
1.0
1.5
2.0
1.0
1.5
3.0
1.8
2.4
5.0
1.5
3.0
1.5
3.0
5.0
1.5
2.4
4.4
1.5
2.4
3.6
18μm
0.7
0.7
0.7
0.7
0.7
0.7
1.0
1.0
1.0
1.5
1.0
1.0
1.5
1.8
1.8
2.4
1.5
1.5
1.5
1.5
3.0
1.5
1.5
3.6
1.5
1.5
2.4
35μm
0.7
0.7
0.7
0.7
0.7
0.7
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.8
1.8
1.8
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.4
1.5
1.5
1.5
70μm
Land Pad Thickness
and Dimension d
A high Q value is achieved when the PCB electrode land
pattern is designed so that it does not project beyond the
1. Standard Land Pattern Dimensions
chip Inductor's (chip coil's) electrode.
Attention should be paid to potential magnetic coupling eects when using the Inductor (coil) as a resonator.
ad
c
b
a
d
c
b
chip coil
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
153
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Soldering and Mounting
Continued on the following page.
(1) Soldering method
Chip Inductors (Chip coils) can be flow or reflow
soldered.
Please contact Murata regarding other soldering
methods.
For LQH2MC/2MP/2HP/3NP/32D/32P/43PB/
44P/5BP/55D/66S, LQM2MP_DH/EH/GH/
2HP_CH/EH/GH/JH/18P_CH/DH/FH/GH/
21P_CA/CH/EH/GH/32P, LQW15C/18C series, please
use reflow soldering.
2. Standard Soldering Conditions
Solder: Use Sn-3.0Ag-0.5Cu solder.
Flux: Use rosin-based flux, but not strongly acidic flux
(with chlorine content exceeding 0.2wt%).
Do not use water-soluble flux.
The flux used for the LQW15C/18C series should be
a rosin-based flux that includes a middle activator
equivalent to 0.06wt% to 0.1wt% chlorine.
For additional mounting methods, please contact Murata.
Land PatternLand Pattern + Solder Resist Solder Resist
(in mm)
Standard Land DimensionsSeries
Continued from the preceding page.
LQH2HP
(Except for LQH2HP_GR)
LQH2HP_GR/JR
LQH32C/D
LQH3NP
(Except for LQH3NP_JR/
GR/ME)
LQH3NP_JR/GR/ME
LQH43C
LQH43P
Attention should be paid to potential magnetic coupling eects when using the Inductor (coil) as a resonator.
1.4
3.0
0.8
2.0
2.5
1.25
2.4
0.75 0.75
3.3
1.0
1.15 1.15
0.45 0.45
0.7 0.7
3.3
7.5
1.5
3.0
1.5
1.5 1.5
3.0
1.4
2.7
5.5
1.0
2.0
1.0
1.3 1.0
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
154
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Soldering and Mounting
(2) Soldering profile
LQM18F/18P
(Except for CH/DH/FH/GH)
LQM21D/21F/21P
(Except for CA/CH/EH/GH)
LQM2MP (Except for DH/EH/GH)
LQM2HP (Except for CH/EH/GH/JH)
LQM31P
LQH31C
LQH32C
LQH43C/43PN
LQM18F/18P
LQM21D/21F/21P/2MP/2HP
LQM31P/32P
LQH2MC, LQH2HP
LQH31C
LQH32D_23
(Except for 391/471/561)
LQH32D_53
LQH3NP/32P/43P/44P/5BP
LQW15C/18C
LQH32C
LQH32D_23 (391/471/561 only)
LQH43C
LQH55D, LQH66S
oReflow Soldering profile
(Sn-3.0Ag-0.5Cu solder)
oFlow Soldering profile
(Sn-3.0Ag-0.5Cu solder)
150°C 60s min. 250°C 4 to 6s 2 times
max. 5s max. 2 times
max.
265±3°C
150°C 60s min. 250°C 4 to 6s 2 times
max. 5s max. 1 time
265±3°C
220°C 30 to 60s 245±3°C 2 times
max. 230°C 260°C/10s 2 times
max.
60s max.
220°C 30 to 60s 245±3°C 2 times
max. 230°C 260°C/10s 1 time60s max.
Continued on the following page.
Continued from the preceding page.
Series Pre-heating Standard Profile Limit Profile
Heating
Temp. (T1) Temp. (T2)
Time. (t1) Time. (t2)
Heating
Cycle
of flow Temp. (T3) Time. (t2)
Cycle
of flow
Series
Standard Profile Limit Profile
Heating
Temp. (T1) Time. (t1)
Heating
Peak
temperature
(T2)
Peak
temperature
(T4)
Cycle
of reflow Temp. (T3) Time. (t2)
Cycle
of reflow
150
180
T2
T4
T3
T1
Temperature (°C)
90±30s time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
T1
T3
T2
Temperature (°C)
Pre-heating
time (s)
t2
Heating
Limit Profile
Standard Profile
t1
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
155
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Soldering and Mounting
(1) Land Pattern Dimensions
Large lands reduce the Q of the mounted chip. Also,
large protruding land areas (bordered by lines having
the dimensions "c" and "d" shown) cause floating and
electrode leaching.
(2) Land Pattern Designing (LQH series, LQW series)
Please follow the recommended patterns.
Otherwise, their performance, which includes
electrical performance or solderability, may be
aected, or result in “position shi” in the soldering
process.
(3) Magnetic Coupling
Since some chip inductors (chip coils) are constructed
like an open magnetic circuit, narrow spacing between
inductors (coils) may cause magnetic coupling.
LQM, LQH66S, and LQH_P series have a magnetically
shielded structure. The structure makes their coupling
coecient smaller than that of conventional chip
inductors (chip coils).
(4) PCB Warping
The PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
(3) Reworking with a Soldering Iron
Preheating at 150°C for 1 minute is required. Do not
directly touch the ceramic element with the tip of the
soldering iron. The reworking soldering conditions are
as follows:
Soldering iron power output: 80W max.
Temperature of soldering iron tip: 350°C
Diameter of soldering iron end: 3.0mm max.
Soldering time: within 3 s
3. Mounting Instructions
Continued on the following page.
Continued from the preceding page.
Please keep the fix time with the soldering iron within
2 times.
Poor example
Except LQH3NP/44P/5BP
LQH3NP/44P/5BP
Products should be located in a sideways direction
(Length: a<b) to mechanical stress.
Good example
a
b
Poor example
The electrode part of the product should be located
as in the figure to avoid mechanical stress.
Good example
Land Solder Resist
d
c
Magnetic Coupling
electrode
electrode
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
156
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Soldering and Mounting
(5) Amount of Solder Paste
Excessive solder causes electrode corrosion, while
insucient solder causes low electrode bonding
strength. Adjust the amount of solder paste as shown
on the right so that the correct amount is applied.
Guideline of solder paste thickness
a LQW15C: 50 to 100μm
a LQM, LQW18C, LQH2MC/2HP, LQH3NP/32P,
LQH43PB/LQH44P/5BP: 100 to 150μm
a LQH31C/32C, LQH43C/43PN, LQH55D,
LQH66S: 200 to 300μm
The following conditions should be observed when cleaning
chip inductors (chip coils):
(1) Cleaning Temperature: 60°C max. (40°C max. for
alcohol cleaning agents)
(2) Ultrasonic
Output: 20W/l max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
Care should be taken not to cause resonance of the
PCB and mounted products.
(3) Cleaning agent
The following cleaning agents have been tested on
individual components. Evaluation in complete
assembly should be done prior to production.
(a) Alcohol cleaning agents
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agents
Pine Alpha ST-100S
LQH66S series: Aqueous agents should not be used
because they may cause quality deterioration or
damage to appearance.
4. Cleaning
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried after aqueous
agents have been removed with deionized water.
For additional cleaning methods, please contact
Murata.
Continued from the preceding page.
LQM
LQH_C/D/H/N/P LQH_S
LQW_C
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
157
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Packaging
Continued on the following page.
Minimum Quantity and 8mm Width Taping Dimensions
(in mm)
Part Number abcø180mm reel ø330mm reel
Dimensions Total Thickness of Tape
Paper Tape
Packaging Code (Minimum Qty. (pcs.))
Bulk
LQW15CN_00
LQW15C_10
0.64: 70nH to 200nH
0.66: 18nH to 48nH
0.69
1.18
1.18
0.8 max.
0.8 max.
D (10000)
D (10000)
—
—
B (500)
B (500)
2.0±0.05 4.0±0.1
aDirection of feed
b
1.75±0.1
ø1.5 +0.1
-0
3.5±0.05
(8.0)
2.0±0.05
c
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
158
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Packaging
Minimum Quantity and 8mm Width Taping Dimensions
Continued on the following page.
Paper Tape 1
LQM21D (1 to 10μH)
LQM21F (1 to 2.2μH)
LQM21P_C0
LQM21P_CA
LQM21P_CH
LQM21P_EH
LQM21P_G
LQM18F
LQM18P_D0
LQM18P_CH
LQM18P_GH
LQW18C
1.45
1.45
1.45
1.45
1.45
1.45
1.45
1.05
1.05
1.1
1.1
1.0
2.25
2.25
2.25
1.45
2.25
2.25
2.25
1.85
1.85
1.9
1.9
1.8
1.1 max.
1.1 max.
0.8 max.
0.9 max.
0.7 max.
1.0 max.
1.1 max.
1.1 max.
0.85 max.
0.95 max.
1.25 max.
1.1 max.
D (4000)
D (4000)
D (4000)
D (3000)
D (3000)
D (3000)
D (4000)
D (4000)
D (4000)
D (4000)
D (4000)
D (4000)
J (10000)
J (10000)
—
—
—
—
—
J (10000)
—
—
—
—
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (500)
Paper Tape 2
LQM18PN_DH 1.05 1.85 1.05 max. D (4000) — B (1000)
(in mm)
Continued from the preceding page.
Part Number abcø180mm reel ø330mm reel
Dimensions Total Thickness of Tape Packaging Code (Minimum Qty. (pcs.))
Bulk
Part Number abcø180mm reel ø330mm reel
Dimensions Total Thickness of Tape Packaging Code (Minimum Qty. (pcs.))
Bulk
a
b
c
Direction of feed
The dimension of the cavity of embossed tape is measured at the bottom side.
<Embossed> <Paper 1> <Paper 2>
4.0±0.1 4.0±0.1
2.0±0.05
0.2
3.5±0.05
1.75±0.1
(8.0)
ø1.5
+0.1
-0
c
*1: 0.25 LQM2HP/2MP/31P_00, LQH2, LQM21P
*1
c
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
159
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Packaging
Minimum Quantity and 8mm Width Taping Dimensions
Continued on the following page.
Embossed Tape
LQM18P_B0
LQM18P_C0
LQM18P_F0
LQM21D (22 to 47μH)
LQM21F (4.7 to 47μH)
LQM21P_GH
LQM2HP_CH
LQM2HP_J0/JC
LQM2HP_JH
LQM2HP_G
LQM2HP_GH
LQM2HP_E0/EH
LQM2MP_DH/EH
LQM2MP_G0
LQM2MP_GH
LQM31P_00
LQM31P_C0
LQM32P_G0/GC
LQH31C
LQH32C_33/_23, LQH32D_23
LQH32C_53, LQH32D_53
LQH32P
LQH2MC_02
LQH2MC_52
1.0
1.0
1.0
1.45
1.45
1.45
2.3
2.25
2.25
2.3
2.3
2.3
1.9
1.85
1.9
1.9
1.9
2.9
1.9
2.9
2.9
2.9
1.9
1.9
1.8
1.8
1.8
2.25
2.25
2.25
2.8
2.75
2.75
2.8
2.8
2.8
2.4
2.25
2.4
3.5
3.5
3.6
3.6
3.6
3.6
3.6
2.3
2.3
0.50
0.60
1.0
1.3
1.3
1.05
0.6
1.3
1.3
1.1
1.1
0.9
0.9
1.1
1.1
1.05
0.75
1.15
2.0
2.1
1.7
1.7
1.05
0.8
L (4000)
L (4000)
L (4000)
L (3000)
L (3000)
L (3000)
L (3000)
L (3000)
L (3000)
L (3000)
L (3000)
L (3000)
L (3000)
L (3000)
L (3000)
L (3000)
L (4000)
L (3000)
L (2000)
L (2000)
L (2000)
L (2000)
L (3000)
L (3000)
—
—
—
K (10000)
K (10000)
—
—
—
—
—
—
—
—
—
—
—
—
—
K (7500)
K (7500)
K (7500)
K (7500)
—
—
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
B (1000)
—
B (1000)
—
B (1000)
B (1000)
B (1000)
—
B (1000)
B (1000)
B (1000)
—
—
—
—
B (100)
B (100)
(in mm)
Continued from the preceding page.
Part Number abcø180mm reel ø330mm reel
Dimensions Depth of Cavity Packaging Code (Minimum Qty. (pcs.))
Bulk
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
160
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Packaging
Minimum Quantity and 8mm Width Taping Dimensions
Continued on the following page.
Embossed Tape
LQH2HP_GR
LQH2HP_JR
2.3
2.3
2.8
2.8
1.1
1.3
L (3000)
L (2000)
—
—
—
—
Embossed Tape
Embossed Tape
LQH3NP_MR 3.3 3.3 1.6 E (2000) F (8000) —
LQH3NP_GR
LQH3NP_JR
LQH3NP_ME
3.3
3.3
3.3
3.3
3.3
3.3
1.1
1.6
1.6
L (3000)
L (2000)
L (2000)
—
—
—
—
—
—
(in mm)
Continued from the preceding page.
Part Number abcø180mm reel ø330mm reel
Dimensions Depth of Cavity Packaging Code (Minimum Qty. (pcs.))
Bulk
Part Number abcø180mm reel ø330mm reel
Dimensions Depth of Cavity Packaging Code (Minimum Qty. (pcs.))
Bulk
Part Number abcø180mm reel ø330mm reel
Dimensions Depth of Cavity Packaging Code (Minimum Qty. (pcs.))
Bulk
a
b
c
Direction of feed
The dimension of the cavity is measured at the bottom side.
<Embossed>
4.0±0.1 4.0±0.1
2.0±0.05
0.25
3.5±0.05
1.75±0.1
(8.0)
ø1.5
+0.1
-0
Polarity Marking
Polarity Marking
Lead-in/out wire
a
b
c
Direction of feed
The dimension of the cavity is measured at the bottom side.
The dimension of the cavity is measured at the bottom side.
<Embossed>
4.0±0.1 4.0±0.1
2.0±0.05
0.2
3.5±0.05
1.75±0.1
(8.0)
ø1.5
+0.1
-0
Direction of feed
3.3±0.1 4.0±0.1
Lead-in/out wire
*1 0.3 LQH3NP_GR
*2 1.1±0.1 LQH3NP_GR
ø1.5
1.75±0.1
8.0±0.1
3.3±0.1
4.0±0.1 2.0±0.05
(0.2) (*1)
1.6+/-0.2
(*2)
3.5±0.05
1R0
1R0
1R0
1R0
1R0
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
161
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Packaging
Minimum Quantity and 12mm Width Embossed Taping Dimensions
Part Number abc ø180mm reel ø330mm reel
Dimensions (*c: Depth of Cavity)
Embossed Tape
Packaging Code (Minimum Qty. (pcs.))
Bulk
LQH43C
LQH43P
LQH44P_J0/GR
LQH44P_P0
LQH5BP_38
LQH5BP_T0
LQH55D
LQH66S
3.6
3.6
4.3
4.3
5.3
5.3
5.4
6.7
4.9
4.9
4.3
4.3
5.3
5.3
6.1
6.7
2.7
2.7
1.4
1.9
4.2
2.4
5.0
5.6
d
0.3
0.3
0.3
0.3
0.4
0.3
0.4
0.4
L (500)
L (500)
L (1000)
L (1000)
L (400)
L (500)
L (350)
L (350)
—
K (2500)
K (3500)
K (3500)
K (1500)
K (3000)
K (1500)
K (1500)
—
—
—
—
—
—
—
—
(in mm)
Continued from the preceding page.
a
b
c
d
8.0±0.1
2.0±0.05
4.0±0.1
5.5±0.05 1.75±0.1
(12.0)
ø1.5+0.1
-0
Direction of feed
The dimension of the cavity of embossed tape is measured at the bottom side.
Polarity Marking
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
162
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Part Numbering p164
Product Detail p165
!Caution/Notice p190
Soldering and Mounting p192
Packaging p196
Inductors for General Circuits
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
163
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
o Part Numbering
(Part Number)
Inductors for General Use
3214675 89:
0.8x0.4mm
1.0x0.5mm
1.6x0.8mm
2.0x1.25mm
3.2x1.6mm
3.2x2.5mm
4.5x3.2mm
4.0x4.0mm
03019
0402
0603
0805
1206
1210
1812
1515
Code Nominal Dimensions (LxW) Size Code (in inch)
18MLQ N 47N MN 0 0 D
1Product ID
LQ Chip Inductors (Chip Coils)
Product ID
2Structure
B
H
M
W
Multilayer Type (Ferrite Core)
Wire Wound Type (Ferrite Core)
Multilayer Type (Ferrite Core)
Wire Wound Type (Ferrite Core)
Code Structure
5Category
A
N
Code Category
8Features
0
1
2
LQM*
1
/LQH*
2
/LQW
LQB/LQM21N
LQH32M
Code Series
7Inductance Tolerance
6Inductance
J
K
M
N
±5%
±10%
±20%
±30%
Code Inductance Tolerance
4Applications and Characteristics
2Dimensions (LxW)
04
15
18
21
31
32
43
44
9Electrode
Expressed by three-digit alphanumerics. The unit is micro-henry
(μH). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits. If
inductance is less than 0.1μH, the inductance code is expressed
by a combination of two figures and the capital letter "N," and the
unit of inductance is nano-henry (nH).
The capital letter "N" indicates the unit of "nH," and also
expresses a decimal point. In this case, all figures are significant
digits.
F#"H J0##
*1 Except for LQM21N Series
*2 Except for LQH32 Series
*1 LQM21N(2.7 - 4.7μH) only.
*2 LQM21N(0.1 - 2.2μH) only.
C
N
N
M
for Choke
for Resonant Circuit
for Resonant Circuit
for Resonant Circuit (Coating Type)
Code Applications and Characteristics
LQW
LQB/LQM
LQH
Series
:Packaging
K
L
B
J
D
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Code Packaging
Impedance Device (Near GHz Band)
Standard Type
General
General
LQH/LQM21*1
LQH/LQM21*1
LQB/LQM/LQW
LQB/LQM18/LQM21*2
LQB/LQM18/LQM21*2/LQW
Series
Standard Type
Standard Type
Standard Type
Features
0
3
LQB/LQM/LQW
LQH
Code Series
Sn
LF Solder
Electrode
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
164
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQB15NN_10 Series 0402 (1005) inch (mm)
Appearance/Dimensions
0.5±0.051.0±0.05
0.5±0.05
0.25±0.1
: Electrode
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQB15NNR22J10p220nH ±5% 25MHz 10 25MHz 380mA 0.35Ω±25% 80MHz
LQB15NNR22K10p220nH ±10% 25MHz 10 25MHz 380mA 0.35Ω±25% 80MHz
LQB15NNR22M10p220nH ±20% 25MHz 10 25MHz 380mA 0.35Ω±25% 80MHz
LQB15NNR27J10p270nH ±5% 25MHz 10 25MHz 330mA 0.41Ω±25% 80MHz
LQB15NNR27K10p270nH ±10% 25MHz 10 25MHz 330mA 0.41Ω±25% 80MHz
LQB15NNR27M10p270nH ±20% 25MHz 10 25MHz 330mA 0.41Ω±25% 80MHz
LQB15NNR33J10p330nH ±5% 25MHz 10 25MHz 300mA 0.48Ω±25% 80MHz
LQB15NNR33K10p330nH ±10% 25MHz 10 25MHz 300mA 0.48Ω±25% 80MHz
LQB15NNR33M10p330nH ±20% 25MHz 10 25MHz 300mA 0.48Ω±25% 80MHz
LQB15NNR39J10p390nH ±5% 25MHz 10 25MHz 300mA 0.54Ω±25% 80MHz
LQB15NNR39K10p390nH ±10% 25MHz 10 25MHz 300mA 0.54Ω±25% 80MHz
LQB15NNR39M10p390nH ±20% 25MHz 10 25MHz 300mA 0.54Ω±25% 80MHz
LQB15NNR47J10p470nH ±5% 25MHz 10 25MHz 300mA 0.64Ω±25% 80MHz
LQB15NNR47K10p470nH ±10% 25MHz 10 25MHz 300mA 0.64Ω±25% 80MHz
LQB15NNR47M10p470nH ±20% 25MHz 10 25MHz 300mA 0.64Ω±25% 80MHz
LQB15NNR56J10p560nH ±5% 25MHz 10 25MHz 300mA 0.73Ω±25% 80MHz
LQB15NNR56K10p560nH ±10% 25MHz 10 25MHz 300mA 0.73Ω±25% 80MHz
LQB15NNR56M10p560nH ±20% 25MHz 10 25MHz 300mA 0.73Ω±25% 80MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-generation of heat will rise to 25°C or less.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
165
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
166
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQB18NN_10 Series 0603 (1608) inch (mm)
Appearance/Dimensions
0.4±0.2
0.8±0.151.6±0.15
0.8±0.15
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQB18NNR22J10p220nH ±5% 25MHz 25 25MHz 450mA 0.37Ω 80MHz
LQB18NNR22K10p220nH ±10% 25MHz 25 25MHz 450mA 0.37Ω 80MHz
LQB18NNR22M10p220nH ±20% 25MHz 25 25MHz 450mA 0.37Ω 80MHz
LQB18NNR22N10p220nH ±30% 25MHz 25 25MHz 450mA 0.37Ω 80MHz
LQB18NNR27J10p270nH ±5% 25MHz 25 25MHz 450mA 0.45Ω 80MHz
LQB18NNR27K10p270nH ±10% 25MHz 25 25MHz 450mA 0.45Ω 80MHz
LQB18NNR27M10p270nH ±20% 25MHz 25 25MHz 450mA 0.45Ω 80MHz
LQB18NNR27N10p270nH ±30% 25MHz 25 25MHz 450mA 0.45Ω 80MHz
LQB18NNR33J10p330nH ±5% 25MHz 25 25MHz 450mA 0.45Ω 80MHz
LQB18NNR33K10p330nH ±10% 25MHz 25 25MHz 450mA 0.45Ω 80MHz
LQB18NNR33M10p330nH ±20% 25MHz 25 25MHz 450mA 0.45Ω 80MHz
LQB18NNR33N10p330nH ±30% 25MHz 25 25MHz 450mA 0.45Ω 80MHz
LQB18NNR39J10p390nH ±5% 25MHz 25 25MHz 450mA 0.58Ω 80MHz
LQB18NNR39K10p390nH ±10% 25MHz 25 25MHz 450mA 0.58Ω 80MHz
LQB18NNR39M10p390nH ±20% 25MHz 25 25MHz 450mA 0.58Ω 80MHz
LQB18NNR39N10p390nH ±30% 25MHz 25 25MHz 450mA 0.58Ω 80MHz
LQB18NNR47J10p470nH ±5% 25MHz 25 25MHz 400mA 0.58Ω 80MHz
LQB18NNR47K10p470nH ±10% 25MHz 25 25MHz 400mA 0.58Ω 80MHz
LQB18NNR47M10p470nH ±20% 25MHz 25 25MHz 400mA 0.58Ω 80MHz
LQB18NNR47N10p470nH ±30% 25MHz 25 25MHz 400mA 0.58Ω 80MHz
LQB18NNR56J10p560nH ±5% 25MHz 25 25MHz 300mA 0.85Ω 80MHz
LQB18NNR56K10p560nH ±10% 25MHz 25 25MHz 300mA 0.85Ω 80MHz
LQB18NNR56M10p560nH ±20% 25MHz 25 25MHz 300mA 0.85Ω 80MHz
LQB18NNR56N10p560nH ±30% 25MHz 25 25MHz 300mA 0.85Ω 80MHz
Operating temp. range: -55 to 125°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
167
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
168
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQH31HN_03 Series 1206 (3216) inch (mm)
Appearance/Dimensions
2.3±0.2
1.8±0.2
1.6±0.2
1.6±0.2
3.2±0.3
0.7 min. 0.7 min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH31HN54NK03p54nH ±10% 1MHz 50 100MHz 920mA 0.035Ω±30% 800MHz
LQH31HN95NK03p95nH ±10% 1MHz 60 100MHz 790mA 0.047Ω±30% 650MHz
LQH31HNR14J03p145nH ±5% 1MHz 60 100MHz 700mA 0.061Ω±30% 500MHz
LQH31HNR14K03p145nH ±10% 1MHz 60 100MHz 700mA 0.061Ω±30% 500MHz
LQH31HNR21J03p215nH ±5% 1MHz 60 100MHz 520mA 0.11Ω±30% 430MHz
LQH31HNR21K03p215nH ±10% 1MHz 60 100MHz 520mA 0.11Ω±30% 430MHz
LQH31HNR29J03p290nH ±5% 1MHz 60 100MHz 420mA 0.17Ω±30% 360MHz
LQH31HNR29K03p290nH ±10% 1MHz 60 100MHz 420mA 0.17Ω±30% 360MHz
LQH31HNR39J03p390nH ±5% 1MHz 60 100MHz 330mA 0.26Ω±30% 300MHz
LQH31HNR39K03p390nH ±10% 1MHz 60 100MHz 330mA 0.26Ω±30% 300MHz
LQH31HNR50J03p500nH ±5% 1MHz 60 100MHz 260mA 0.44Ω±30% 270MHz
LQH31HNR50K03p500nH ±10% 1MHz 60 100MHz 260mA 0.44Ω±30% 270MHz
LQH31HNR61J03p610nH ±5% 1MHz 60 100MHz 250mA 0.48Ω±30% 240MHz
LQH31HNR61K03p610nH ±10% 1MHz 60 100MHz 250mA 0.48Ω±30% 240MHz
LQH31HNR75J03p750nH ±5% 1MHz 60 100MHz 190mA 0.79Ω±30% 220MHz
LQH31HNR75K03p750nH ±10% 1MHz 60 100MHz 190mA 0.79Ω±30% 220MHz
LQH31HNR88J03p880nH ±5% 1MHz 60 100MHz 180mA 0.86Ω±30% 200MHz
LQH31HNR88K03p880nH ±10% 1MHz 60 100MHz 180mA 0.86Ω±30% 200MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
169
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
170
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQH31MN_03 Series 1206 (3216) inch (mm)
Appearance/Dimensions
2.3±0.2
1.8±0.2
1.6±0.2
1.6±0.2
3.2±0.3
0.7 min. 0.7 min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH31MNR15K03p0.15μH ±10% 1MHz 20 25.2MHz 250mA 0.39Ω±40% 250MHz
LQH31MNR22K03p0.22μH ±10% 1MHz 20 25.2MHz 240mA 0.43Ω±40% 250MHz
LQH31MNR33K03p0.33μH ±10% 1MHz 30 25.2MHz 230mA 0.45Ω±40% 250MHz
LQH31MNR47K03p0.47μH ±10% 1MHz 30 25.2MHz 215mA 0.83Ω±40% 200MHz
LQH31MNR56K03p0.56μH ±10% 1MHz 30 25.2MHz 200mA 0.61Ω±40% 180MHz
LQH31MNR68K03p0.68μH ±10% 1MHz 30 25.2MHz 190mA 0.67Ω±40% 160MHz
LQH31MNR82K03p0.82μH ±10% 1MHz 30 25.2MHz 185mA 0.73Ω±40% 120MHz
LQH31MN1R0K03p1.0μH ±10% 1MHz 35 10MHz 175mA 0.49Ω±30% 100MHz
LQH31MN1R2J03p1.2μH ±5% 1MHz 35 10MHz 165mA 0.37Ω±30% 90MHz
LQH31MN1R2K03p1.2μH ±10% 1MHz 35 10MHz 165mA 0.9Ω±30% 90MHz
LQH31MN1R5J03p1.5μH ±5% 1MHz 35 10MHz 155mA 1.0Ω±30% 75MHz
LQH31MN1R5K03p1.5μH ±10% 1MHz 35 10MHz 155mA 1.0Ω±30% 75MHz
LQH31MN1R8J03p1.8μH ±5% 1MHz 35 10MHz 150mA 1.6Ω±30% 60MHz
LQH31MN1R8K03p1.8μH ±10% 1MHz 35 10MHz 150mA 1.6Ω±30% 60MHz
LQH31MN2R2J03p2.2μH ±5% 1MHz 35 10MHz 140mA 0.7Ω±30% 50MHz
LQH31MN2R2K03p2.2μH ±10% 1MHz 35 10MHz 140mA 0.7Ω±30% 50MHz
LQH31MN2R7J03p2.7μH ±5% 1MHz 35 10MHz 135mA 0.55Ω±30% 43MHz
LQH31MN2R7K03p2.7μH ±10% 1MHz 35 10MHz 135mA 0.55Ω±30% 43MHz
LQH31MN3R3J03p3.3μH ±5% 1MHz 35 8MHz 130mA 0.61Ω±30% 38MHz
LQH31MN3R3K03p3.3μH ±10% 1MHz 35 8MHz 130mA 0.61Ω±30% 38MHz
LQH31MN3R9J03p3.9μH ±5% 1MHz 35 8MHz 125mA 1.5Ω±30% 35MHz
LQH31MN3R9K03p3.9μH ±10% 1MHz 35 8MHz 125mA 1.5Ω±30% 35MHz
LQH31MN4R7J03p4.7μH ±5% 1MHz 35 8MHz 120mA 1.7Ω±30% 31MHz
LQH31MN4R7K03p4.7μH ±10% 1MHz 35 8MHz 120mA 1.7Ω±30% 31MHz
LQH31MN5R6J03p5.6μH ±5% 1MHz 35 8MHz 115mA 1.8Ω±30% 28MHz
LQH31MN5R6K03p5.6μH ±10% 1MHz 35 8MHz 115mA 1.8Ω±30% 28MHz
LQH31MN6R8J03p6.8μH ±5% 1MHz 35 8MHz 110mA 2.0Ω±30% 25MHz
LQH31MN6R8K03p6.8μH ±10% 1MHz 35 8MHz 110mA 2.0Ω±30% 25MHz
LQH31MN8R2J03p8.2μH ±5% 1MHz 35 8MHz 105mA 2.2Ω±30% 23MHz
LQH31MN8R2K03p8.2μH ±10% 1MHz 35 8MHz 105mA 2.2Ω±30% 23MHz
LQH31MN100J03p10μH ±5% 1MHz 35 5MHz 100mA 2.5Ω±30% 20MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
171
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH31MN100K03p10μH ±10% 1MHz 35 5MHz 100mA 2.5Ω±30% 20MHz
LQH31MN120J03p12μH ±5% 1MHz 35 5MHz 95mA 2.7Ω±30% 18MHz
LQH31MN120K03p12μH ±10% 1MHz 35 5MHz 95mA 2.7Ω±30% 18MHz
LQH31MN150J03p15μH ±5% 1MHz 35 5MHz 90mA 3.0Ω±30% 16MHz
LQH31MN150K03p15μH ±10% 1MHz 35 5MHz 90mA 3.0Ω±30% 16MHz
LQH31MN180J03p18μH ±5% 1MHz 35 5MHz 85mA 3.4Ω±30% 15MHz
LQH31MN180K03p18μH ±10% 1MHz 35 5MHz 85mA 3.4Ω±30% 15MHz
LQH31MN220J03p22μH ±5% 1MHz 40 2.5MHz 85mA 3.1Ω±30% 14MHz
LQH31MN220K03p22μH ±10% 1MHz 40 2.5MHz 85mA 3.1Ω±30% 14MHz
LQH31MN270J03p27μH ±5% 1MHz 40 2.5MHz 85mA 3.4Ω±30% 13MHz
LQH31MN270K03p27μH ±10% 1MHz 40 2.5MHz 85mA 3.4Ω±30% 13MHz
LQH31MN330J03p33μH ±5% 1MHz 40 2.5MHz 80mA 3.8Ω±30% 12MHz
LQH31MN330K03p33μH ±10% 1MHz 40 2.5MHz 80mA 3.8Ω±30% 12MHz
LQH31MN390J03p39μH ±5% 1MHz 40 2.5MHz 55mA 7.2Ω±30% 11MHz
LQH31MN390K03p39μH ±10% 1MHz 40 2.5MHz 55mA 7.2Ω±30% 11MHz
LQH31MN470J03p47μH ±5% 1MHz 40 2.5MHz 55mA 8.0Ω±30% 10MHz
LQH31MN470K03p47μH ±10% 1MHz 40 2.5MHz 55mA 8.0Ω±30% 10MHz
LQH31MN560J03p56μH ±5% 1MHz 40 2.5MHz 50mA 8.9Ω±30% 9.0MHz
LQH31MN560K03p56μH ±10% 1MHz 40 2.5MHz 50mA 8.9Ω±30% 9.0MHz
LQH31MN680J03p68μH ±5% 1MHz 40 2.5MHz 50mA 9.9Ω±30% 8.5MHz
LQH31MN680K03p68μH ±10% 1MHz 40 2.5MHz 50mA 9.9Ω±30% 8.5MHz
LQH31MN820J03p82μH ±5% 1MHz 40 2.5MHz 45mA 11.0Ω±30% 7.5MHz
LQH31MN820K03p82μH ±10% 1MHz 40 2.5MHz 45mA 11.0Ω±30% 7.5MHz
LQH31MN101J03p100μH ±5% 1MHz 40 2.5MHz 45mA 12.0Ω±30% 7.0MHz
LQH31MN101K03p100μH ±10% 1MHz 40 2.5MHz 45mA 12.0Ω±30% 7.0MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
172
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQH32MN_23 Series 1210 (3225) inch (mm)
Appearance/Dimensions
2.5±0.2
2.0±0.2
2.5±0.23.2±0.3
0.9±0.3
0.9±0.3
2.5±0.2 2.5±0.2
A
A: 2.8 max.
* Please refer to dimension A for
LQH32CN_33 (2R2M, 4R7M, 100K)
types. (See Fig. 1)
Fig. 1
2.5±0.2
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQH32MN1R0M23p1.0μH ±20% 1MHz 20 1MHz 445mA 0.5Ω 100MHz
LQH32MN1R2M23p1.2μH ±20% 1MHz 20 1MHz 425mA 0.6Ω 100MHz
LQH32MN1R5K23p1.5μH ±10% 1MHz 20 1MHz 400mA 0.6Ω 75MHz
LQH32MN1R8K23p1.8μH ±10% 1MHz 20 1MHz 390mA 0.7Ω 60MHz
LQH32MN2R2K23p2.2μH ±10% 1MHz 20 1MHz 370mA 0.8Ω 50MHz
LQH32MN2R7K23p2.7μH ±10% 1MHz 20 1MHz 320mA 0.9Ω 43MHz
LQH32MN3R3K23p3.3μH ±10% 1MHz 20 1MHz 300mA 1.0Ω 38MHz
LQH32MN3R9K23p3.9μH ±10% 1MHz 20 1MHz 290mA 1.1Ω 35MHz
LQH32MN4R7K23p4.7μH ±10% 1MHz 20 1MHz 270mA 1.2Ω 31MHz
LQH32MN5R6K23p5.6μH ±10% 1MHz 20 1MHz 250mA 1.3Ω 28MHz
LQH32MN6R8K23p6.8μH ±10% 1MHz 20 1MHz 240mA 1.5Ω 25MHz
LQH32MN8R2K23p8.2μH ±10% 1MHz 20 1MHz 225mA 1.6Ω 23MHz
LQH32MN100J23p10μH ±5% 1MHz 35 1MHz 190mA 1.8Ω 20MHz
LQH32MN100K23p10μH ±10% 1MHz 35 1MHz 190mA 1.8Ω 20MHz
LQH32MN120J23p12μH ±5% 1MHz 35 1MHz 180mA 2.0Ω 18MHz
LQH32MN120K23p12μH ±10% 1MHz 35 1MHz 180mA 2.0Ω 18MHz
LQH32MN150J23p15μH ±5% 1MHz 35 1MHz 170mA 2.2Ω 16MHz
LQH32MN150K23p15μH ±10% 1MHz 35 1MHz 170mA 2.2Ω 16MHz
LQH32MN180J23p18μH ±5% 1MHz 35 1MHz 165mA 2.5Ω 15MHz
LQH32MN180K23p18μH ±10% 1MHz 35 1MHz 165mA 2.5Ω 15MHz
LQH32MN220J23p22μH ±5% 1MHz 35 1MHz 150mA 2.8Ω 14MHz
LQH32MN220K23p22μH ±10% 1MHz 35 1MHz 150mA 2.8Ω 14MHz
LQH32MN270J23p27μH ±5% 1MHz 35 1MHz 125mA 3.1Ω 13MHz
LQH32MN270K23p27μH ±10% 1MHz 35 1MHz 125mA 3.1Ω 13MHz
LQH32MN330J23p33μH ±5% 1MHz 40 1MHz 115mA 3.5Ω 12MHz
LQH32MN330K23p33μH ±10% 1MHz 40 1MHz 115mA 3.5Ω 12MHz
LQH32MN390J23p39μH ±5% 1MHz 40 1MHz 110mA 3.9Ω 11MHz
LQH32MN390K23p39μH ±10% 1MHz 40 1MHz 110mA 3.9Ω 11MHz
LQH32MN470J23p47μH ±5% 1MHz 40 1MHz 100mA 4.3Ω 11MHz
LQH32MN470K23p47μH ±10% 1MHz 40 1MHz 100mA 4.3Ω 11MHz
LQH32MN560J23p56μH ±5% 1MHz 40 1MHz 85mA 4.9Ω 10MHz
LQH32MN560K23p56μH ±10% 1MHz 40 1MHz 85mA 4.9Ω 10MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
173
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQH32MN680J23p68μH ±5% 1MHz 40 1MHz 80mA 5.5Ω 9.0MHz
LQH32MN680K23p68μH ±10% 1MHz 40 1MHz 80mA 5.5Ω 9.0MHz
LQH32MN820J23p82μH ±5% 1MHz 40 1MHz 70mA 6.2Ω 8.5MHz
LQH32MN820K23p82μH ±10% 1MHz 40 1MHz 70mA 6.2Ω 8.5MHz
LQH32MN101J23p100μH ±5% 1MHz 40 796kHz 80mA 7.0Ω 8.0MHz
LQH32MN101K23p100μH ±10% 1MHz 40 796kHz 80mA 7.0Ω 8.0MHz
LQH32MN121J23p120μH ±5% 1MHz 40 796kHz 75mA 8.0Ω 7.5MHz
LQH32MN121K23p120μH ±10% 1MHz 40 796kHz 75mA 8.0Ω 7.5MHz
LQH32MN151J23p150μH ±5% 1MHz 40 796kHz 70mA 9.3Ω 7.0MHz
LQH32MN151K23p150μH ±10% 1MHz 40 796kHz 70mA 9.3Ω 7.0MHz
LQH32MN181J23p180μH ±5% 1MHz 40 796kHz 65mA 10.2Ω 6.0MHz
LQH32MN181K23p180μH ±10% 1MHz 40 796kHz 65mA 10.2Ω 6.0MHz
LQH32MN221J23p220μH ±5% 1MHz 40 796kHz 65mA 11.8Ω 5.5MHz
LQH32MN221K23p220μH ±10% 1MHz 40 796kHz 65mA 11.8Ω 5.5MHz
LQH32MN271J23p270μH ±5% 1MHz 40 796kHz 65mA 12.5Ω 5.0MHz
LQH32MN271K23p270μH ±10% 1MHz 40 796kHz 65mA 12.5Ω 5.0MHz
LQH32MN331J23p330μH ±5% 1MHz 40 796kHz 65mA 13.0Ω 5.0MHz
LQH32MN331K23p330μH ±10% 1MHz 40 796kHz 65mA 13.0Ω 5.0MHz
LQH32MN391J23p390μH ±5% 1MHz 50 796kHz 50mA 22.0Ω 5.0MHz
LQH32MN391K23p390μH ±10% 1MHz 50 796kHz 50mA 22.0Ω 5.0MHz
LQH32MN471J23p470μH ±5% 1kHz 50 796kHz 45mA 25.0Ω 5.0MHz
LQH32MN471K23p470μH ±10% 1kHz 50 796kHz 45mA 25.0Ω 5.0MHz
LQH32MN561J23p560μH ±5% 1kHz 50 796kHz 40mA 28.0Ω 5.0MHz
LQH32MN561K23p560μH ±10% 1kHz 50 796kHz 40mA 28.0Ω 5.0MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
174
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQH43MN_03 Series 1812 (4532) inch (mm)
Appearance/Dimensions
3.6±0.2
4.5±0.3
2.6±0.2
3.2±0.2
3.2±0.2
1.0min. 1.0min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 2500
Lø180mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQH43MN1R0M03p1.0μH ±20% 1MHz 20 1MHz 500mA 0.20Ω 120MHz
LQH43MN1R2M03p1.2μH ±20% 1MHz 20 1MHz 500mA 0.20Ω 100MHz
LQH43MN1R5M03p1.5μH ±20% 1MHz 20 1MHz 500mA 0.30Ω 85MHz
LQH43MN1R8M03p1.8μH ±20% 1MHz 20 1MHz 500mA 0.30Ω 75MHz
LQH43MN2R2M03p2.2μH ±20% 1MHz 20 1MHz 500mA 0.30Ω 62MHz
LQH43MN2R7M03p2.7μH ±20% 1MHz 20 1MHz 500mA 0.32Ω 53MHz
LQH43MN3R3M03p3.3μH ±20% 1MHz 20 1MHz 500mA 0.35Ω 47MHz
LQH43MN3R9M03p3.9μH ±20% 1MHz 20 1MHz 500mA 0.38Ω 41MHz
LQH43MN4R7K03p4.7μH ±10% 1MHz 30 1MHz 500mA 0.40Ω 38MHz
LQH43MN5R6K03p5.6μH ±10% 1MHz 30 1MHz 500mA 0.47Ω 33MHz
LQH43MN6R8K03p6.8μH ±10% 1MHz 30 1MHz 450mA 0.50Ω 31MHz
LQH43MN8R2K03p8.2μH ±10% 1MHz 30 1MHz 450mA 0.56Ω 27MHz
LQH43MN100J03p10μH ±5% 1MHz 35 1MHz 400mA 0.56Ω 23MHz
LQH43MN100K03p10μH ±10% 1MHz 35 1MHz 400mA 0.56Ω 23MHz
LQH43MN120J03p12μH ±5% 1MHz 35 1MHz 380mA 0.62Ω 21MHz
LQH43MN120K03p12μH ±10% 1MHz 35 1MHz 380mA 0.62Ω 21MHz
LQH43MN150J03p15μH ±5% 1MHz 35 1MHz 360mA 0.73Ω 19MHz
LQH43MN150K03p15μH ±10% 1MHz 35 1MHz 360mA 0.73Ω 19MHz
LQH43MN180J03p18μH ±5% 1MHz 35 1MHz 340mA 0.82Ω 17MHz
LQH43MN180K03p18μH ±10% 1MHz 35 1MHz 340mA 0.82Ω 17MHz
LQH43MN220J03p22μH ±5% 1MHz 35 1MHz 320mA 0.94Ω 15MHz
LQH43MN220K03p22μH ±10% 1MHz 35 1MHz 320mA 0.94Ω 15MHz
LQH43MN270J03p27μH ±5% 1MHz 35 1MHz 300mA 1.1Ω 14MHz
LQH43MN270K03p27μH ±10% 1MHz 35 1MHz 300mA 1.1Ω 14MHz
LQH43MN330J03p33μH ±5% 1MHz 35 1MHz 270mA 1.2Ω 12MHz
LQH43MN330K03p33μH ±10% 1MHz 35 1MHz 270mA 1.2Ω 12MHz
LQH43MN390J03p39μH ±5% 1MHz 35 1MHz 240mA 1.4Ω 11MHz
LQH43MN390K03p39μH ±10% 1MHz 35 1MHz 240mA 1.4Ω 11MHz
LQH43MN470J03p47μH ±5% 1MHz 35 1MHz 220mA 1.5Ω 10MHz
LQH43MN470K03p47μH ±10% 1MHz 35 1MHz 220mA 1.5Ω 10MHz
LQH43MN560J03p56μH ±5% 1MHz 35 1MHz 200mA 1.7Ω 9.3MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
175
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQH43MN560K03p56μH ±10% 1MHz 35 1MHz 200mA 1.7Ω 9.3MHz
LQH43MN680J03p68μH ±5% 1MHz 35 1MHz 180mA 1.9Ω 8.4MHz
LQH43MN680K03p68μH ±10% 1MHz 35 1MHz 180mA 1.9Ω 8.4MHz
LQH43MN820J03p82μH ±5% 1MHz 35 1MHz 170mA 2.2Ω 7.5MHz
LQH43MN820K03p82μH ±10% 1MHz 35 1MHz 170mA 2.2Ω 7.5MHz
LQH43MN101J03p100μH ±5% 1MHz 40 796kHz 160mA 2.5Ω 6.8MHz
LQH43MN101K03p100μH ±10% 1MHz 40 796kHz 160mA 2.5Ω 6.8MHz
LQH43MN121J03p120μH ±5% 1MHz 40 796kHz 150mA 3.0Ω 6.2MHz
LQH43MN121K03p120μH ±10% 1MHz 40 796kHz 150mA 3.0Ω 6.2MHz
LQH43MN151J03p150μH ±5% 1MHz 40 796kHz 130mA 3.7Ω 5.5MHz
LQH43MN151K03p150μH ±10% 1MHz 40 796kHz 130mA 3.7Ω 5.5MHz
LQH43MN181J03p180μH ±5% 1MHz 40 796kHz 120mA 4.5Ω 5.0MHz
LQH43MN181K03p180μH ±10% 1MHz 40 796kHz 120mA 4.5Ω 5.0MHz
LQH43MN221J03p220μH ±5% 1MHz 40 796kHz 110mA 5.4Ω 4.5MHz
LQH43MN221K03p220μH ±10% 1MHz 40 796kHz 110mA 5.4Ω 4.5MHz
LQH43MN271J03p270μH ±5% 1MHz 40 796kHz 100mA 6.8Ω 4.0MHz
LQH43MN271K03p270μH ±10% 1MHz 40 796kHz 100mA 6.8Ω 4.0MHz
LQH43MN331J03p330μH ±5% 1MHz 40 796kHz 95mA 8.2Ω 3.6MHz
LQH43MN331K03p330μH ±10% 1MHz 40 796kHz 95mA 8.2Ω 3.6MHz
LQH43MN391J03p390μH ±5% 1MHz 40 796kHz 90mA 9.7Ω 3.3MHz
LQH43MN391K03p390μH ±10% 1MHz 40 796kHz 90mA 9.7Ω 3.3MHz
LQH43MN471J03p470μH ±5% 1kHz 40 796kHz 80mA 11.8Ω 3.0MHz
LQH43MN471K03p470μH ±10% 1kHz 40 796kHz 80mA 11.8Ω 3.0MHz
LQH43MN561J03p560μH ±5% 1kHz 40 796kHz 70mA 14.5Ω 2.7MHz
LQH43MN561K03p560μH ±10% 1kHz 40 796kHz 70mA 14.5Ω 2.7MHz
LQH43MN681J03p680μH ±5% 1kHz 40 796kHz 65mA 17.0Ω 2.5MHz
LQH43MN681K03p680μH ±10% 1kHz 40 796kHz 65mA 17.0Ω 2.5MHz
LQH43MN821J03p820μH ±5% 1kHz 40 796kHz 60mA 20.5Ω 2.2MHz
LQH43MN821K03p820μH ±10% 1kHz 40 796kHz 60mA 20.5Ω 2.2MHz
LQH43MN102J03p1000μH ±5% 1kHz 40 252kHz 50mA 25.0Ω 2.0MHz
LQH43MN102K03p1000μH ±10% 1kHz 40 252kHz 50mA 25.0Ω 2.0MHz
LQH43MN122J03p1200μH ±5% 1kHz 40 252kHz 45mA 30.0Ω 1.8MHz
LQH43MN122K03p1200μH ±10% 1kHz 40 252kHz 45mA 30.0Ω 1.8MHz
LQH43MN152J03p1500μH ±5% 1kHz 40 252kHz 40mA 37.0Ω 1.6MHz
LQH43MN152K03p1500μH ±10% 1kHz 40 252kHz 40mA 37.0Ω 1.6MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
176
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
177
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQH43NN_03 Series 1812 (4532) inch (mm)
Appearance/Dimensions
3.6±0.2
4.5±0.3
2.6±0.2
3.2±0.2
3.2±0.2
1.0 min. 1.0 min. (in mm)
AA
A: 3.5 max.
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 2500
Lø180mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQH43NN1R0M03p1.0μH ±20% 1MHz 20 1MHz 500mA 0.20Ω 120MHz
LQH43NN1R2M03p1.2μH ±20% 1MHz 20 1MHz 500mA 0.20Ω 100MHz
LQH43NN1R5M03p1.5μH ±20% 1MHz 20 1MHz 500mA 0.30Ω 85MHz
LQH43NN1R8M03p1.8μH ±20% 1MHz 20 1MHz 500mA 0.30Ω 75MHz
LQH43NN2R2M03p2.2μH ±20% 1MHz 20 1MHz 500mA 0.30Ω 62MHz
LQH43NN2R7M03p2.7μH ±20% 1MHz 20 1MHz 500mA 0.32Ω 53MHz
LQH43NN3R3M03p3.3μH ±20% 1MHz 20 1MHz 500mA 0.35Ω 47MHz
LQH43NN3R9M03p3.9μH ±20% 1MHz 20 1MHz 500mA 0.38Ω 41MHz
LQH43NN4R7K03p4.7μH ±10% 1MHz 30 1MHz 500mA 0.40Ω 38MHz
LQH43NN4R7M03p4.7μH ±20% 1MHz 30 1MHz 500mA 0.40Ω 38MHz
LQH43NN5R6K03p5.6μH ±10% 1MHz 30 1MHz 500mA 0.47Ω 33MHz
LQH43NN5R6M03p5.6μH ±20% 1MHz 30 1MHz 500mA 0.47Ω 33MHz
LQH43NN6R8K03p6.8μH ±10% 1MHz 30 1MHz 450mA 0.50Ω 31MHz
LQH43NN6R8M03p6.8μH ±20% 1MHz 30 1MHz 450mA 0.50Ω 31MHz
LQH43NN8R2K03p8.2μH ±10% 1MHz 30 1MHz 450mA 0.56Ω 27MHz
LQH43NN8R2M03p8.2μH ±20% 1MHz 30 1MHz 450mA 0.56Ω 27MHz
LQH43NN100J03p10μH ±5% 1MHz 35 1MHz 400mA 0.56Ω 23MHz
LQH43NN100K03p10μH ±10% 1MHz 35 1MHz 400mA 0.56Ω 23MHz
LQH43NN120J03p12μH ±5% 1MHz 35 1MHz 380mA 0.62Ω 21MHz
LQH43NN120K03p12μH ±10% 1MHz 35 1MHz 380mA 0.62Ω 21MHz
LQH43NN150J03p15μH ±5% 1MHz 35 1MHz 360mA 0.73Ω 19MHz
LQH43NN150K03p15μH ±10% 1MHz 35 1MHz 360mA 0.73Ω 19MHz
LQH43NN180J03p18μH ±5% 1MHz 35 1MHz 340mA 0.82Ω 17MHz
LQH43NN180K03p18μH ±10% 1MHz 35 1MHz 340mA 0.82Ω 17MHz
LQH43NN220J03p22μH ±5% 1MHz 35 1MHz 320mA 0.94Ω 15MHz
LQH43NN220K03p22μH ±10% 1MHz 35 1MHz 320mA 0.94Ω 15MHz
LQH43NN270J03p27μH ±5% 1MHz 35 1MHz 300mA 1.1Ω 14MHz
LQH43NN270K03p27μH ±10% 1MHz 35 1MHz 300mA 1.1Ω 14MHz
LQH43NN330J03p33μH ±5% 1MHz 35 1MHz 270mA 1.2Ω 12MHz
LQH43NN330K03p33μH ±10% 1MHz 35 1MHz 270mA 1.2Ω 12MHz
LQH43NN390J03p39μH ±5% 1MHz 35 1MHz 240mA 1.4Ω 11MHz
Operating temp. range: -40 to 105°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
178
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQH43NN390K03p39μH ±10% 1MHz 35 1MHz 240mA 1.4Ω 11MHz
LQH43NN470J03p47μH ±5% 1MHz 35 1MHz 220mA 1.5Ω 10MHz
LQH43NN470K03p47μH ±10% 1MHz 35 1MHz 220mA 1.5Ω 10MHz
LQH43NN560J03p56μH ±5% 1MHz 35 1MHz 200mA 1.7Ω 9.3MHz
LQH43NN560K03p56μH ±10% 1MHz 35 1MHz 200mA 1.7Ω 9.3MHz
LQH43NN680J03p68μH ±5% 1MHz 35 1MHz 180mA 1.9Ω 8.4MHz
LQH43NN680K03p68μH ±10% 1MHz 35 1MHz 180mA 1.9Ω 8.4MHz
LQH43NN820J03p82μH ±5% 1MHz 35 1MHz 170mA 2.2Ω 7.5MHz
LQH43NN820K03p82μH ±10% 1MHz 35 1MHz 170mA 2.2Ω 7.5MHz
LQH43NN101J03p100μH ±5% 1MHz 40 796kHz 160mA 2.5Ω 6.8MHz
LQH43NN101K03p100μH ±10% 1MHz 40 796kHz 160mA 2.5Ω 6.8MHz
LQH43NN121J03p120μH ±5% 1MHz 40 796kHz 150mA 3.0Ω 6.2MHz
LQH43NN121K03p120μH ±10% 1MHz 40 796kHz 150mA 3.0Ω 6.2MHz
LQH43NN151J03p150μH ±5% 1MHz 40 796kHz 130mA 3.7Ω 5.5MHz
LQH43NN151K03p150μH ±10% 1MHz 40 796kHz 130mA 3.7Ω 5.5MHz
LQH43NN181J03p180μH ±5% 1MHz 40 796kHz 120mA 4.5Ω 5.0MHz
LQH43NN181K03p180μH ±10% 1MHz 40 796kHz 120mA 4.5Ω 5.0MHz
LQH43NN221J03p220μH ±5% 1MHz 40 796kHz 110mA 5.4Ω 4.5MHz
LQH43NN221K03p220μH ±10% 1MHz 40 796kHz 110mA 5.4Ω 4.5MHz
LQH43NN271J03p270μH ±5% 1MHz 40 796kHz 100mA 6.8Ω 4.0MHz
LQH43NN271K03p270μH ±10% 1MHz 40 796kHz 100mA 6.8Ω 4.0MHz
LQH43NN331J03p330μH ±5% 1MHz 40 796kHz 95mA 8.2Ω 3.6MHz
LQH43NN331K03p330μH ±10% 1MHz 40 796kHz 95mA 8.2Ω 3.6MHz
LQH43NN391J03p390μH ±5% 1MHz 40 796kHz 90mA 9.7Ω 3.3MHz
LQH43NN391K03p390μH ±10% 1MHz 40 796kHz 90mA 9.7Ω 3.3MHz
LQH43NN471J03p470μH ±5% 1kHz 40 796kHz 80mA 11.8Ω 3.0MHz
LQH43NN471K03p470μH ±10% 1kHz 40 796kHz 80mA 11.8Ω 3.0MHz
LQH43NN561J03p560μH ±5% 1kHz 40 796kHz 70mA 14.5Ω 2.7MHz
LQH43NN561K03p560μH ±10% 1kHz 40 796kHz 70mA 14.5Ω 2.7MHz
LQH43NN681J03p680μH ±5% 1kHz 40 796kHz 65mA 17.0Ω 2.5MHz
LQH43NN681K03p680μH ±10% 1kHz 40 796kHz 65mA 17.0Ω 2.5MHz
LQH43NN821J03p820μH ±5% 1kHz 40 796kHz 60mA 20.5Ω 2.2MHz
LQH43NN821K03p820μH ±10% 1kHz 40 796kHz 60mA 20.5Ω 2.2MHz
LQH43NN102J03p1000μH ±5% 1kHz 40 252kHz 50mA 25.0Ω 2.0MHz
LQH43NN102K03p1000μH ±10% 1kHz 40 252kHz 50mA 25.0Ω 2.0MHz
LQH43NN122J03p1200μH ±5% 1kHz 40 252kHz 45mA 30.0Ω 1.8MHz
LQH43NN122K03p1200μH ±10% 1kHz 40 252kHz 45mA 30.0Ω 1.8MHz
LQH43NN152J03p1500μH ±5% 1kHz 40 252kHz 40mA 37.0Ω 1.6MHz
LQH43NN152K03p1500μH ±10% 1kHz 40 252kHz 40mA 37.0Ω 1.6MHz
LQH43NN182J03p1800μH ±5% 1kHz 40 252kHz 35mA 45.0Ω 1.5MHz
LQH43NN182K03p1800μH ±10% 1kHz 40 252kHz 35mA 45.0Ω 1.5MHz
LQH43NN222J03p2200μH ±5% 1kHz 40 252kHz 30mA 50.0Ω 1.3MHz
LQH43NN222K03p2200μH ±10% 1kHz 40 252kHz 30mA 50.0Ω 1.3MHz
LQH43NN242J03p2400μH ±5% 1kHz 40 252kHz 25mA 53.0Ω 1.2MHz
LQH43NN242K03p2400μH ±10% 1kHz 40 252kHz 25mA 53.0Ω 1.2MHz
Operating temp. range: -40 to 105°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and Inductance will be within ±10% of initial inductance value.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
179
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
180
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQH44NN_03 Series 1515 (4040) inch (mm)
Appearance/Dimensions
4.0±0.2 4.0±0.2
2.6±0.3
4.3±0.2
1.1±0.2 1.1±0.2
(0.2)
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 1500
Lø180mm Embossed Taping 250
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH44NNR51M03p0.51μH ±20% 1kHz 4.50A 0.0075Ω±30% 160MHz
LQH44NNR74M03p0.74μH ±20% 1kHz 3.50A 0.011Ω±30% 150MHz
LQH44NN1R0M03p1.0μH ±20% 1kHz 3.30A 0.012Ω±30% 90MHz
LQH44NN1R5M03p1.5μH ±20% 1kHz 3.20A 0.016Ω±30% 70MHz
LQH44NN2R2M03p2.2μH ±20% 1kHz 2.50A 0.019Ω±20% 55MHz
LQH44NN3R3M03p3.3μH ±20% 1kHz 2.25A 0.024Ω±30% 34.8MHz
LQH44NN4R7M03p4.7μH ±20% 1kHz 1.95A 0.040Ω±30% 23.4MHz
LQH44NN5R0K03p5.0μH ±10% 1kHz 1.95A 0.040Ω±30% 23.4MHz
LQH44NN6R8K03p6.8μH ±10% 1kHz 1.60A 0.051Ω±30% 19.8MHz
LQH44NN100K03p10μH ±10% 1kHz 1.30A 0.067Ω±30% 23.5MHz
LQH44NN150K03p15μH ±10% 1kHz 1.10A 0.100Ω±30% 11.5MHz
LQH44NN220K03p22μH ±10% 1kHz 0.95A 0.170Ω±30% 14MHz
LQH44NN330K03p33μH ±10% 1kHz 0.76A 0.210Ω±30% 12MHz
LQH44NN470K03p47μH ±10% 1kHz 0.64A 0.330Ω±30% 10MHz
LQH44NN680K03p68μH ±10% 1kHz 0.53A 0.410Ω±30% 8.0MHz
LQH44NN101K03p100μH ±10% 1kHz 0.30A 0.540Ω±30% 6.3MHz
LQH44NN151K03p150μH ±10% 1kHz 0.26A 0.920Ω±30% 5.2MHz
LQH44NN221K03p220μH ±10% 1kHz 0.21A 1.20Ω±30% 3.9MHz
LQH44NN331K03p330μH ±10% 1kHz 0.18A 1.76Ω±30% 3.0MHz
LQH44NN471K03p470μH ±10% 1kHz 0.145A 2.23Ω±30% 2.7MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
181
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
182
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQM18NN_00 Series 0603 (1608) inch (mm)
Appearance/Dimensions
(in mm)
1.6±0.15
0.8±0.15
0.8±0.15
0.35±0.15
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQM18NN47NM00p47nH ±20% 50MHz 10 50MHz 50mA 0.30Ω 260MHz
LQM18NN68NM00p68nH ±20% 50MHz 10 50MHz 50mA 0.30Ω 250MHz
LQM18NN82NM00p82nH ±20% 50MHz 10 50MHz 50mA 0.30Ω 245MHz
LQM18NNR10K00p100nH ±10% 25MHz 15 25MHz 50mA 0.50Ω 240MHz
LQM18NNR12K00p120nH ±10% 25MHz 15 25MHz 50mA 0.50Ω 205MHz
LQM18NNR15K00p150nH ±10% 25MHz 15 25MHz 50mA 0.60Ω 180MHz
LQM18NNR18K00p180nH ±10% 25MHz 15 25MHz 50mA 0.60Ω 165MHz
LQM18NNR22K00p220nH ±10% 25MHz 15 25MHz 50mA 0.80Ω 150MHz
LQM18NNR27K00p270nH ±10% 25MHz 15 25MHz 50mA 0.80Ω 136MHz
LQM18NNR33K00p330nH ±10% 25MHz 15 25MHz 35mA 0.85Ω 125MHz
LQM18NNR39K00p390nH ±10% 25MHz 15 25MHz 35mA 1.00Ω 110MHz
LQM18NNR47K00p470nH ±10% 25MHz 15 25MHz 35mA 1.35Ω 105MHz
LQM18NNR56K00p560nH ±10% 25MHz 15 25MHz 35mA 1.55Ω 95MHz
LQM18NNR68K00p680nH ±10% 25MHz 15 25MHz 35mA 1.70Ω 90MHz
LQM18NNR82K00p820nH ±10% 25MHz 15 25MHz 35mA 2.10Ω 85MHz
LQM18NN1R0K00p1000nH ±10% 10MHz 35 10MHz 25mA 0.60Ω 75MHz
LQM18NN1R2K00p1200nH ±10% 10MHz 35 10MHz 25mA 0.80Ω 65MHz
LQM18NN1R5K00p1500nH ±10% 10MHz 35 10MHz 25mA 0.80Ω 60MHz
LQM18NN1R8K00p1800nH ±10% 10MHz 35 10MHz 25mA 0.95Ω 55MHz
LQM18NN2R2K00p2200nH ±10% 10MHz 35 10MHz 15mA 1.15Ω 50MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
183
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
184
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQM21NN_10 Series 0805 (2012) inch (mm)
Appearance/Dimensions
(in mm)
Inductance: 0.1 to 2.2μH
Dimension of t Inductance: 2.7 to 4.7μH
0.85±0.2
1.25±0.2
2.0±0.2 1.25±0.2
0.5±0.3
t
Packaging (Inductance: 0.10µH to 2.2µH)
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 1000
Packaging (Inductance: 2.7µH to 4.7µH)
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 10000
Lø180mm Embossed Taping 3000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQM21NNR10K10p0.10μH ±10% 25MHz 20 25MHz 250mA 0.26Ω 340MHz
LQM21NNR12K10p0.12μH ±10% 25MHz 20 25MHz 250mA 0.29Ω 310MHz
LQM21NNR15K10p0.15μH ±10% 25MHz 20 25MHz 250mA 0.32Ω 270MHz
LQM21NNR18K10p0.18μH ±10% 25MHz 20 25MHz 250mA 0.35Ω 250MHz
LQM21NNR22K10p0.22μH ±10% 25MHz 20 25MHz 250mA 0.38Ω 220MHz
LQM21NNR27K10p0.27μH ±10% 25MHz 20 25MHz 250mA 0.42Ω 200MHz
LQM21NNR33K10p0.33μH ±10% 25MHz 20 25MHz 250mA 0.48Ω 180MHz
LQM21NNR39K10p0.39μH ±10% 25MHz 25 25MHz 200mA 0.53Ω 165MHz
LQM21NNR47K10p0.47μH ±10% 25MHz 25 25MHz 200mA 0.57Ω 150MHz
LQM21NNR56K10p0.56μH ±10% 25MHz 25 25MHz 150mA 0.63Ω 140MHz
LQM21NNR68K10p0.68μH ±10% 25MHz 25 25MHz 150mA 0.72Ω 125MHz
LQM21NNR82K10p0.82μH ±10% 25MHz 25 25MHz 150mA 0.81Ω 115MHz
LQM21NN1R0K10p1.0μH ±10% 10MHz 45 10MHz 50mA 0.40Ω 107MHz
LQM21NN1R2K10p1.2μH ±10% 10MHz 45 10MHz 50mA 0.47Ω 97MHz
LQM21NN1R5K10p1.5μH ±10% 10MHz 45 10MHz 50mA 0.50Ω 87MHz
LQM21NN1R8K10p1.8μH ±10% 10MHz 45 10MHz 50mA 0.57Ω 80MHz
LQM21NN2R2K10p2.2μH ±10% 10MHz 45 10MHz 30mA 0.63Ω 71MHz
LQM21NN2R7K10p2.7μH ±10% 10MHz 45 10MHz 30mA 0.69Ω 66MHz
LQM21NN3R3K10p3.3μH ±10% 10MHz 45 10MHz 30mA 0.80Ω 59MHz
LQM21NN3R9K10p3.9μH ±10% 10MHz 45 10MHz 30mA 0.89Ω 53MHz
LQM21NN4R7K10p4.7μH ±10% 10MHz 45 10MHz 30mA 1.00Ω 47MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Ferrite Core
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
185
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
186
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQW04CA_00 Series 03019 (0805) inch (mm)
Appearance/Dimensions
0.85±0.05
0.50±0.05
0.17±0.08
0.18±0.05
0.50±0.05
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW04CA60NK00p60nH ±10% 100MHz 620mA 0.18Ω 3000MHz
LQW04CA90NK00p90nH ±10% 100MHz 520mA 0.24Ω 2500MHz
LQW04CAR12K00p120nH ±10% 100MHz 510mA 0.28Ω 2100MHz
LQW04CAR29K00p290nH ±10% 100MHz 270mA 0.94Ω 1400MHz
LQW04CAR45K00p450nH ±10% 100MHz 200mA 1.23Ω 850MHz
LQW04CAR51K00p510nH ±10% 100MHz 200mA 1.31Ω 700MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
187
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits
LQW15CA_00 Series 0402 (1005) inch (mm)
Appearance/Dimensions
1.02±0.10
0.3±0.1
0.10+0.2/-0.05
0.55±0.060.56±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.) Remark
LQW15CA22NJ00p22nH ±5% 10MHz 1300mA 0.06Ω 3000MHz *1
LQW15CA22NK00p22nH ±10% 10MHz 1300mA 0.06Ω 3000MHz *1
LQW15CA39NJ00p39nH ±5% 10MHz 1100mA 0.075Ω 2700MHz *2
LQW15CA39NK00p39nH ±10% 10MHz 1100mA 0.075Ω 2700MHz *2
LQW15CA59NJ00p59nH ±5% 10MHz 1000mA 0.095Ω 2300MHz *3
LQW15CA59NK00p59nH ±10% 10MHz 1000mA 0.095Ω 2300MHz *3
LQW15CA83NJ00p83nH ±5% 10MHz 970mA 0.12Ω 1700MHz *4
LQW15CA83NK00p83nH ±10% 10MHz 970mA 0.12Ω 1700MHz *4
LQW15CAR11J00p110nH ±5% 10MHz 900mA 0.13Ω 1600MHz *5
LQW15CAR11K00p110nH ±10% 10MHz 900mA 0.13Ω 1600MHz *5
LQW15CAR14J00p140nH ±5% 10MHz 680mA 0.18Ω 1400MHz *6
LQW15CAR14K00p140nH ±10% 10MHz 680mA 0.18Ω 1400MHz *6
LQW15CAR18J00p180nH ±5% 10MHz 640mA 0.21Ω 1300MHz *7
LQW15CAR18K00p180nH ±10% 10MHz 640mA 0.21Ω 1300MHz *7
LQW15CAR22J00p220nH ±5% 10MHz 540mA 0.29Ω 1300MHz *8
LQW15CAR22K00p220nH ±10% 10MHz 540mA 0.29Ω 1300MHz *8
LQW15CAR27J00p270nH ±5% 10MHz 480mA 0.38Ω 1200MHz *9
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
*1: Typical impedance: 100Ω (typ) @900MHz/150Ω (typ) @1.7GHz
*2: Typical impedance: 180Ω (typ) @900MHz/280Ω (typ) @1.7GHz
*3: Typical impedance: 290Ω (typ) @900MHz/360Ω (typ) @1.7GHz
*4: Typical impedance: 430Ω (typ) @900MHz/750Ω (typ) @1.7GHz
*5: Typical impedance: 580Ω (typ) @900MHz/1000Ω (typ) @1.7GHz
*6: Typical impedance: 780Ω (typ) @900MHz/1300Ω (typ) @1.7GHz
*7: Typical impedance: 1000Ω (typ) @900MHz/1700Ω (typ) @1.7GHz
*8: Typical impedance: 1400Ω (typ) @900MHz/2000Ω (typ) @1.7GHz
*9: Typical impedance: 1800Ω (typ) @900MHz/2100Ω (typ) @1.7GHz
*10: Typical impedance: 2200Ω (typ) @900MHz/2300Ω (typ) @1.7GHz
*11: Typical impedance: 2800Ω (typ) @900MHz/2350Ω (typ) @1.7GHz
*12: Typical impedance: 3400Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*13: Typical impedance: 4250Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*14: Typical impedance: 4950Ω (typ) @900MHz/2350Ω (typ) @1.7GHz
*15: Typical impedance: 5800Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*16: Typical impedance: 6500Ω (typ) @900MHz/2450Ω (typ) @1.7GHz
*17: Typical impedance: 7000Ω (typ) @900MHz/2500Ω (typ) @1.7GHz
*18: Typical impedance: 5200Ω (typ) @900MHz/1600Ω (typ) @1.7GHz
*19: Typical impedance: 510Ω (typ) @900MHz/610Ω (typ) @1.7GHz
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
188
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.) Remark
LQW15CAR27K00p270nH ±10% 10MHz 480mA 0.38Ω 1200MHz *9
LQW15CAR32J00p320nH ±5% 10MHz 420mA 0.41Ω 1100MHz *10
LQW15CAR32K00p320nH ±10% 10MHz 420mA 0.41Ω 1100MHz *10
LQW15CAR37J00p370nH ±5% 10MHz 360mA 0.575Ω 1000MHz *11
LQW15CAR37K00p370nH ±10% 10MHz 360mA 0.575Ω 1000MHz *11
LQW15CAR43J00p430nH ±5% 10MHz 360mA 0.68Ω 920MHz *12
LQW15CAR43K00p430nH ±10% 10MHz 360mA 0.68Ω 920MHz *12
LQW15CAR50J00p500nH ±5% 10MHz 270mA 0.97Ω 900MHz *13
LQW15CAR50K00p500nH ±10% 10MHz 270mA 0.97Ω 900MHz *13
LQW15CAR56J00p560nH ±5% 10MHz 270mA 1.00Ω 900MHz *14
LQW15CAR56K00p560nH ±10% 10MHz 270mA 1.00Ω 900MHz *14
LQW15CAR64J00p640nH ±5% 10MHz 240mA 1.40Ω 870MHz *15
LQW15CAR64K00p640nH ±10% 10MHz 240mA 1.40Ω 870MHz *15
LQW15CAR73J00p730nH ±5% 10MHz 200mA 1.95Ω 810MHz *16
LQW15CAR73K00p730nH ±10% 10MHz 200mA 1.95Ω 810MHz *16
LQW15CAR80J00p800nH ±5% 10MHz 190mA 2.10Ω 770MHz *17
LQW15CAR80K00p800nH ±10% 10MHz 190mA 2.10Ω 770MHz *17
LQW15CA1R0K00p1000nH ±10% 10MHz 180mA 2.20Ω 400MHz *18
LQW15CA2R0K00p2000nH ±10% 10MHz 130mA 3.20Ω 120MHz *19
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: No Shield
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
*1: Typical impedance: 100Ω (typ) @900MHz/150Ω (typ) @1.7GHz
*2: Typical impedance: 180Ω (typ) @900MHz/280Ω (typ) @1.7GHz
*3: Typical impedance: 290Ω (typ) @900MHz/360Ω (typ) @1.7GHz
*4: Typical impedance: 430Ω (typ) @900MHz/750Ω (typ) @1.7GHz
*5: Typical impedance: 580Ω (typ) @900MHz/1000Ω (typ) @1.7GHz
*6: Typical impedance: 780Ω (typ) @900MHz/1300Ω (typ) @1.7GHz
*7: Typical impedance: 1000Ω (typ) @900MHz/1700Ω (typ) @1.7GHz
*8: Typical impedance: 1400Ω (typ) @900MHz/2000Ω (typ) @1.7GHz
*9: Typical impedance: 1800Ω (typ) @900MHz/2100Ω (typ) @1.7GHz
*10: Typical impedance: 2200Ω (typ) @900MHz/2300Ω (typ) @1.7GHz
*11: Typical impedance: 2800Ω (typ) @900MHz/2350Ω (typ) @1.7GHz
*12: Typical impedance: 3400Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*13: Typical impedance: 4250Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*14: Typical impedance: 4950Ω (typ) @900MHz/2350Ω (typ) @1.7GHz
*15: Typical impedance: 5800Ω (typ) @900MHz/2400Ω (typ) @1.7GHz
*16: Typical impedance: 6500Ω (typ) @900MHz/2450Ω (typ) @1.7GHz
*17: Typical impedance: 7000Ω (typ) @900MHz/2500Ω (typ) @1.7GHz
*18: Typical impedance: 5200Ω (typ) @900MHz/1600Ω (typ) @1.7GHz
*19: Typical impedance: 510Ω (typ) @900MHz/610Ω (typ) @1.7GHz
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
189
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits !Caution/Notice
Rating
Storage and Operating Condition
Handling
1. About the Rated Current
Do not use products beyond the rated current as this may
create excessive heat and deteriorate the insulation
resistance.
2. About Excessive Surge Current
Surge current (pulse current or rush current) greater than
the specified rated current applied to the product may
cause a critical failure, such as an open circuit or burnout
caused by excessive temperature rise.
Please contact us in advance if applying a surge current.
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
<Storage Requirements>
1. Storage Period
The LQB series and LQM series should be used within 6
months; the other products should be used within 12
months.
Check solderability if this period is exceeded.
2. Storage Conditions
(1) Store products in a warehouse in compliance with the
following conditions:
Temperature: -10 to +40 degrees C.
Humidity: 15 to 85% (relative humidity)
Do not subject products to rapid changes in
temperature and humidity.
Do not store them in a chemical atmosphere such as
one containing sulfurous acid gas or alkaline gas.
This will prevent electrode oxidation, which causes
poor solderability and possible corrosion of inductors.
(2) Do not store products in bulk packaging to prevent
collision among inductors, which causes core chipping
and wire breakage.
(3) Store products on pallets to protect from humidity,
dust, etc.
(4) Avoid heat shock, vibration, direct sunlight, etc.
This item is designed to have sucient strength, but handle
with care to avoid chipping or breaking its ceramic
structure.
LQH_M/N series
a To prevent breaking the wire, avoid touching with sharp
materials, such as tweezers or the bristles of a cleaning
brush, to the wire wound portion of this product.
a To prevent breaking the core, avoid applying excessive
mechanical shock to products mounted on the board.
LQW_C series
a To prevent breaking the wire, avoid touching with sharp
materials, such as tweezers or other materials such as
the bristles of a cleaning brush, to the wire wound
portion.
a To prevent breaking the core, avoid applying excessive
mechanical shock to products mounted on the board.
a In some mounting machines, when picking up
components, a support pin pushes the components up
from the bottom of the base tape. In this case, please
remove the support pin. The support pin may damage
the components and break the wire.
a In rare cases, the laser recognition cannot recognize this
component. Please contact us when you use laser
recognizion. (There is no problem with the permeation
and reflection type.)
a The product temperature rises about 40°C maximum
when the permissible current is applied to LQW15C.
Please use caution regarding the temperature of the
substrate and air around the part.
LQB series and LQM series
a There is the possibility that magnetism may change the
inductance value. Do not use a magnet or tweezers
with magnetism when handling chip inductors. (The tip
of the tweezers should be molded with resin or pottery.)
a When excessive current over the rated current is
applied, it may cause the inductance value to change
due to magnetism.
<Transportation>
Do not apply excessive vibration or mechanical shock to
product.
Continued on the following page.
!Caution
Notice
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
190
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits !Caution/Notice
Measuring Method
<Resin Coating>
When coating products with resin, the relatively high resin
curing stress may change inductance values.
For exterior coating, select resin carefully so that
electrical and mechanical performance of the product is
not aected. Prior to use, please evaluate reliability with
the product mounted in your application set.
(LQH/LQW series)
An open circuit issue may occur by mechanical stress
caused by the resin, amount/cured shape of resin, or
operating conditions, etc. Some resins containing
impurities or chloride may possibly generate chlorine by
hydrolysis under some operating conditions, causing
corrosion of the inductor wire and leading to an open
circuit.
<Handling of a Substrate>
Aer mounting products on a substrate, do not apply any
stress to the product caused by bending or twisting the
substrate when cropping the substrate, inserting and
removing a connector from the substrate, or tightening a
screw to the substrate.
Excessive mechanical stress may cause cracking in the
Product.
Bending Twisting
Continued from the preceding page.
Measuring Method of Inductance/Q
1. Residual elements and stray elements of test fixtures can
be described by F-parameter as shown in the following:
3. Thus, the relation between Zx and Zm is shown in the
following:
V1A
=B
I1CD
V2
I2
AB
CD
Zm Zx
V1V2
I1I2
ProductTest fixtureTest Head
Zm - β
1 - ZmΓ
Zx = α
where, α = D / A = 1
β = B / D = Zsm - (1 - Yom Zsm) Zss
Γ = C / A = Yom
Zsm: measured impedance of short chip
Zss: residual impedance of short chip*
Yom: measured admittance when opening the fixture
*Residual inductance of short chip
0.556nH LQW04CA/15CA
Residual
Inductance Series
2. The impedance of chip inductors (chip coils) Zx and
measured value Zm can be described by input/output
current/voltage.
V1
I1,
Zm = V2
I2
Zx =
4. Lx and Qx should be calculated with the following
equation.
Lx: Inductance of chip Inductors (chip coils)
Qx: Q of chip Inductors (chip coils)
f: Measuring frequency
,
Im (Zx)
2πf
Lx = Im (Zx)
Re (Zx)
Qx =
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
191
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits Soldering and Mounting
Continued on the following page.
A high Q value is achieved when the PCB electrode land
pattern is designed so that it does not project beyond the
chip Inductor's (chip coil's) electrode.
1. Standard Land Pattern Dimensions
(1) Soldering method
Chip Inductors (Chip coils) can be flow or reflow
soldered.
Please contact Murata regarding other soldering
methods.
Solder: Use Sn-3.0Ag-0.5Cu solder.
Flux: Use rosin-based flux, but not strongly acidic flux
(with chlorine content exceeding 0.2wt%).
Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
2. Standard Soldering Conditions
(in mm)
Standard Land DimensionsSeries
Land PatternLand Pattern + Solder Resist Solder Resist
LQB15N
LQB18N
LQM18N
LQM21N
LQH31M
LQH44N
LQW04CA_00
LQW15CA_00
LQH32M
LQH43M
LQH43N
Attention should be paid to potential magnetic coupling eects when using the Inductor (coil) as a resonator.
LQB18N
LQM18N
LQM21N
LQH31M
LQH44N
LQW04CA_00
LQW15CA_00
Flow
Reflow
Reflow
LQB15NN
0.7
1.0
1.5
3.0
0.48
0.64
Part Number a
2.2 to 2.6
1.8 to 2.0
3.0 to 4.0
4.5
4.4
1.05
1.45
b
0.7
1.2
1.0
1.3
0.45
0.45
c
0.51.2 to 1.40.4
a
c
b
5.5
1.0
2.0
1.0
1.3 1.0
7.5
1.5
3.0
1.5
1.5 1.5
4.5
1.5
1.5
1.5 1.5
0.3
1.2
7.5
2.1
2.8
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
192
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits Soldering and Mounting
Continued on the following page.
(2) Soldering profile
(3) Reworking with a Soldering Iron
*Except for LQW04CA
Preheating at 150°C for 1 minute is required. Do not
directly touch the ceramic element with the tip of the
soldering iron. The reworking soldering conditions are
as follows:
oReflow Soldering profile
(Sn-3.0Ag-0.5Cu solder)
oFlow Soldering profile
(Sn-3.0Ag-0.5Cu solder)
Series Pre-heating Standard Profile Limit Profile
Heating
Temp. (T1) Temp. (T2)
Time. (t1) Time. (t2)
Heating
Cycle
of flow Temp. (T3) Time. (t1)
Cycle
of flow
Series
Standard Profile Limit Profile
Heating
Temp. (T1) Time. (t1)
Heating
Peak
temperature
(T2)
Peak
temperature
(T4)
Cycle
of reflow Temp. (T3) Time. (t2)
Cycle
of reflow
Continued from the preceding page.
LQB18N
LQM18N
LQM21N
LQH31M
LQH32M
150°C 60s min. 250°C 4 to 6s 2 times max. 5s max. 2 times max.265±3°C
150°C 60s min. 250°C 4 to 6s 2 times max. 5s max. 1 time265±3°C
LQB15N
LQB18N
LQM18N
LQM21N
LQH31M
LQH43N
LQH44N
LQW04CA
LQW15CA
LQH32M
LQH43M
220°C 30 to 60s 245±3°C 2 times max. 230°C 260°C/10s 2 times max.60s max.
220°C 30 to 60s 245±3°C 2 times max. 230°C 260°C/10s 1 time60s max.
Soldering iron power output: 80W max.
Temperature of soldering iron tip: 350°C
Diameter of soldering iron end: 3.0mm max.
Soldering time: within 3 s
Please keep the fix time with the soldering iron within
2 times.
150
180
T2
T4
T3
T1
Temperature (°C)
90±30s time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
T1
T3
T2
Temperature (°C)
Pre-heating
time (s)
t2
Heating Limit Profile
Standard Profile
t1
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
193
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits Soldering and Mounting
Continued on the following page.
(1) Land Pattern Dimensions
Large lands reduce the Q of the mounted chip. Also,
large protruding land areas (bordered by lines having
the dimensions "c" and "d" shown) cause floating and
electrode leaching.
(2) Land Pattern Designing (LQH series)
Please follow the recommended patterns.
Otherwise, their performance, which includes
electrical performance or solderability, may be
aected, or result in “position shi” in the soldering
process.
(3) Magnetic Coupling
Since some chip inductors (chip coils) are constructed
like an open magnetic circuit, narrow spacing between
inductors (coils) may cause magnetic coupling.
LQB/LQM series have a magnetically shielded
structure. The structure makes their coupling
coecient smaller than that of conventional chip
inductors (chip coils).
(4) PCB Warping
The PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
3. Mounting Instructions
(5) Amount of Solder Paste
Excessive solder causes electrode corrosion, while
insucient solder causes low electrode bonding
strength. Adjust the amount of solder paste as shown
on the right so that the correct amount is applied.
Guideline of solder paste thickness
a LQM: 100 to 150μm
a LQB: 100 to 200μm
a LQH: 200 to 300μm
a LQW04CA: 80 to 100μm
a LQW15CA: 50 to 100μm
Continued from the preceding page.
Poor example
Products should be located in a sideways direction
(Length: a<b) to mechanical stress.
Good example
a
b
Poor example
The electrode part of the product should be located
as in the figure to avoid mechanical stress.
Good example
Land Solder Resist
d
c
Magnetic Coupling
electrode
electrode
LQB/LQM
LQH
LQW_C
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
194
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits Soldering and Mounting
The following conditions should be observed when
cleaning chip inductors (chip coils):
(1) Cleaning Temperature: 60°C max. (40°C max. for
alcohol cleaning agents)
(2) Ultrasonic
Output: 20W/l max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
Care should be taken not to cause resonance of the
PCB and mounted products.
(3) Cleaning agent
The following cleaning agents have been tested on
individual components. Evaluation in complete
assembly should be done prior to production.
(a) Alcohol cleaning agents
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agents
Pine Alpha ST-100S
4. Cleaning
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried aer aqueous
agents have been removed with deionized water.
For additional cleaning methods, please contact
Murata.
Continued from the preceding page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
195
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits Packaging
Minimum Quantity and 8mm Width Taping Dimensions
Paper Tape
(in mm)
Part Number abcø180mm reel ø330mm reel
Dimensions Total Thickness of Tape Packaging Code (Minimum Qty. (pcs.))
Bulk
Part Number abcø180mm reel ø330mm reel
Dimensions Total Thickness of Tape Packaging Code (Minimum Qty. (pcs.))
Bulk
Embossed Tape
Part Number abcø180mm reel ø330mm reel
Dimensions Depth of Cavity Packaging Code (Minimum Qty. (pcs.))
Bulk
Continued on the following page.
LQB18N
LQM21N (0.1 to 2.2μH)
LQM18N
1.05
1.45
1.05
1.85
2.25
1.85
1.1 max.
1.1 max.
1.1 max.
D (4000)
D (4000)
D (4000)
—
J (10000)
J (10000)
B (1000)
B (1000)
B (1000)
LQM21N (2.7 to 4.7μH)
LQH31M
LQH32M
1.45
1.9
2.9
2.25
3.6
3.6
1.3
2.0
2.1
L (3000)
L (2000)
L (2000)
K (10000)
K (7500)
K (7500)
B (1000)
—
—
Paper Tape
LQB15N
LQW04CA_00
LQW15CA_00
0.65
0.59
0.66
1.15
1.01
1.22
0.8 max.
0.71 max.
0.9 max.
D (10000)
D (10000)
D (10000)
—
—
—
B (1000)
B (500)
B (500)
(in mm)
a
b
c
Direction of feed
The dimension of the cavity of embossed tape is measured at the bottom side.
<Embossed> <Paper>
4.0±0.1 4.0±0.1
2.0±0.05
0.2
3.5±0.05
1.75±0.1
(8.0)
ø1.5
+0.1
-0
c
Minimum Quantity and 8mm Width Taping Dimensions
<LQB15N>
c
2.0±0.05 4.0±0.1
a
b
1.75±0.1
ø1.5+0.1
-0
3.5±0.05
(8.0)
2.0±0.05
c
Direction of feed
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
196
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Circuits Packaging
Minimum Quantity and 12mm Width Embossed Taping Dimensions
(in mm)
Embossed Tape
Part Number abc ø180mm reel ø330mm reel
Dimensions (*c: Depth of Cavity) Packaging Code (Minimum Qty. (pcs.))
Bulkd
LQH43M
LQH43N
LQH44N
3.6
3.6
4.3
4.9
4.9
4.3
2.7
2.7
4.7
0.3
0.3
0.4
L (500)
L (500)
L (250)
K (2500)
K (2500)
K (1500)
—
—
—
Continued from the preceding page.
a
b
c
d
8.0±0.1
2.0±0.05
4.0±0.1
5.5±0.05 1.75±0.1
(12.0)
ø1.5+0.1
-0
Direction of feed
The dimension of the cavity of embossed tape is measured at the bottom side.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
197
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
MEMO
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
198
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Part Numbering p200
Product Detail p201
!Caution/Notice p292
Soldering and Mounting p294
Packaging p298
RF Inductors
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
199
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
o Part Numbering
(Part Number)
RF Inductors
3
15
2
G
1
LQ
4
H
6
1N0
7
S
5
N
8
0
9
2
:
D
1Product ID
LQ Chip Inductors (Chip Coils)
Product ID
2Structure
G
H
P
W
Multilayer Type (Air-core Inductors (Coils))
Wire Wound Type (Ferrite Core)
Film Type
Wire Wound Type (Air-core Inductors (Coils))
Wire Wound Type (Ferrite Core)
Code Structure
5Category
G/N
S
Q
W
Code Category
8Features
0
1
8
LQG/LQP/LQW/LQH*
1
LQW15A/18A/2BH
LQW15A/LQW18A
Code Series
7Inductance Tolerance
6Inductance
B
C
D
F
G
H
J
K
S
W
±0.1nH
±0.2nH
±0.5nH
±1%
±2%
±3%
±5%
±10%
±0.3nH
±0.05nH
Code Inductance Tolerance
4Applications and Characteristics
2Dimensions (LxW)
02
03
04
15
18
21
2B
2U
31
0.4×0.2mm
0.6×0.3mm
0.8×0.4mm
1.0×0.5mm
1.6×0.8mm
2.0×1.25mm
2.0×1.5mm
2.5×2.0mm
3.2×1.6mm
01005
0201
03015
0402
0603
0805
0805
1008
1206
Code Nominal Dimensions (LxW) Size Code (in inch)
9Electrode
Expressed by three-digit alphanumerics. The unit is micro-henry
(μH). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits. If
inductance is less than 0.1μH, the inductance code is expressed
by a combination of two figures and the capital letter "N," and the
unit of inductance is nano-henry (nH). The capital letter "N"
indicates the unit of "nH," and also expresses a decimal point. In
this case, all figures are significant digits. For those products
whose inductance values are specified using three designated
digits, these values may be indicated using the closest two digits
instead.
F#"H J0##
*1 Except for LQH32 Series
*1 Except for LQP02T *2 Except for LQW21H *3 Except for LQW2BA/LQW2UA
H
M
P
T
A
H
H
Multilayer Air-core Inductors (Coils)
Film Type (High Q Type)
Film Type
Film Type (For Large Current)
Film Type (Low DC Resistance Type)
High Q Type (UHF-SHF)
High Q Type (VHF-UHF)
for High-frequency Resonant Circuit
Code Applications and Characteristics
LQG
LQP
LQP
LQW
LQH
Series
:Packaging
K
L/E
B
J
D
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Code Packaging
Standard Type
High Q Type
Specialty Dimensions
General
LQH/LQWppH*2
LQH/LQW2BA/LQW2UA/LQWppH/LQP
LQW/LQG/LQP
LQW18A/LQG/LQP*1
LQWppA*3 /LQG/LQP
Series
Standard Type
High-Q/Low DC Resistance
Low DC Resistance,
Large Rated Current
Features
0
2
3
LQG18H/LQW
pp
A/LQW
pp
C
LQG15H/LQP02T/LQP03T/
LQP15T/LQP
pp
M
LQW
pp
H/LQH
Code Series
Sn
LF Solder
Electrode
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
200
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQG15HN_02 Series 0402 (1005) inch (mm)
Appearance/Dimensions
0.5±0.05
0.5±0.051.0±0.05
0.25±0.1 Polarity Marking
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
Jø330mm Paper Taping 50000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQG15HN1N0B02p1.0nH ±0.1nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HN1N0C02p1.0nH ±0.2nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HN1N0S02p1.0nH ±0.3nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HN1N1B02p1.1nH ±0.1nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N1C02p1.1nH ±0.2nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N1S02p1.1nH ±0.3nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N2B02p1.2nH ±0.1nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N2C02p1.2nH ±0.2nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N2S02p1.2nH ±0.3nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N3B02p1.3nH ±0.1nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N3C02p1.3nH ±0.2nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N3S02p1.3nH ±0.3nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N5B02p1.5nH ±0.1nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N5C02p1.5nH ±0.2nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N5S02p1.5nH ±0.3nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N6B02p1.6nH ±0.1nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N6C02p1.6nH ±0.2nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N6S02p1.6nH ±0.3nH 100MHz 8 100MHz 1000mA 0.08Ω 6000MHz
LQG15HN1N8B02p1.8nH ±0.1nH 100MHz 8 100MHz 900mA 0.08Ω 6000MHz
LQG15HN1N8C02p1.8nH ±0.2nH 100MHz 8 100MHz 900mA 0.08Ω 6000MHz
LQG15HN1N8S02p1.8nH ±0.3nH 100MHz 8 100MHz 900mA 0.08Ω 6000MHz
LQG15HN2N0B02p2.0nH ±0.1nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HN2N0C02p2.0nH ±0.2nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HN2N0S02p2.0nH ±0.3nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HN2N2B02p2.2nH ±0.1nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HN2N2C02p2.2nH ±0.2nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HN2N2S02p2.2nH ±0.3nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HN2N4B02p2.4nH ±0.1nH 100MHz 8 100MHz 800mA 0.10Ω 6000MHz
LQG15HN2N4C02p2.4nH ±0.2nH 100MHz 8 100MHz 800mA 0.10Ω 6000MHz
LQG15HN2N4S02p2.4nH ±0.3nH 100MHz 8 100MHz 800mA 0.10Ω 6000MHz
LQG15HN2N7B02p2.7nH ±0.1nH 100MHz 8 100MHz 800mA 0.10Ω 6000MHz
LQG15HN2N7C02p2.7nH ±0.2nH 100MHz 8 100MHz 800mA 0.10Ω 6000MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
201
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQG15HN2N7S02p2.7nH ±0.3nH 100MHz 8 100MHz 800mA 0.10Ω 6000MHz
LQG15HN3N0B02p3.0nH ±0.1nH 100MHz 8 100MHz 800mA 0.11Ω 6000MHz
LQG15HN3N0C02p3.0nH ±0.2nH 100MHz 8 100MHz 800mA 0.11Ω 6000MHz
LQG15HN3N0S02p3.0nH ±0.3nH 100MHz 8 100MHz 800mA 0.11Ω 6000MHz
LQG15HN3N3B02p3.3nH ±0.1nH 100MHz 8 100MHz 800mA 0.12Ω 6000MHz
LQG15HN3N3C02p3.3nH ±0.2nH 100MHz 8 100MHz 800mA 0.12Ω 6000MHz
LQG15HN3N3S02p3.3nH ±0.3nH 100MHz 8 100MHz 800mA 0.12Ω 6000MHz
LQG15HN3N6B02p3.6nH ±0.1nH 100MHz 8 100MHz 700mA 0.13Ω 6000MHz
LQG15HN3N6C02p3.6nH ±0.2nH 100MHz 8 100MHz 700mA 0.13Ω 6000MHz
LQG15HN3N6S02p3.6nH ±0.3nH 100MHz 8 100MHz 700mA 0.13Ω 6000MHz
LQG15HN3N9B02p3.9nH ±0.1nH 100MHz 8 100MHz 700mA 0.13Ω 6000MHz
LQG15HN3N9C02p3.9nH ±0.2nH 100MHz 8 100MHz 700mA 0.13Ω 6000MHz
LQG15HN3N9S02p3.9nH ±0.3nH 100MHz 8 100MHz 700mA 0.13Ω 6000MHz
LQG15HN4N3B02p4.3nH ±0.1nH 100MHz 8 100MHz 700mA 0.15Ω 6000MHz
LQG15HN4N3C02p4.3nH ±0.2nH 100MHz 8 100MHz 700mA 0.15Ω 6000MHz
LQG15HN4N3S02p4.3nH ±0.3nH 100MHz 8 100MHz 700mA 0.15Ω 6000MHz
LQG15HN4N7B02p4.7nH ±0.1nH 100MHz 8 100MHz 700mA 0.16Ω 6000MHz
LQG15HN4N7C02p4.7nH ±0.2nH 100MHz 8 100MHz 700mA 0.16Ω 6000MHz
LQG15HN4N7S02p4.7nH ±0.3nH 100MHz 8 100MHz 700mA 0.16Ω 6000MHz
LQG15HN5N1B02p5.1nH ±0.1nH 100MHz 8 100MHz 600mA 0.16Ω 6000MHz
LQG15HN5N1C02p5.1nH ±0.2nH 100MHz 8 100MHz 600mA 0.16Ω 6000MHz
LQG15HN5N1S02p5.1nH ±0.3nH 100MHz 8 100MHz 600mA 0.16Ω 6000MHz
LQG15HN5N6B02p5.6nH ±0.1nH 100MHz 8 100MHz 600mA 0.18Ω 5300MHz
LQG15HN5N6C02p5.6nH ±0.2nH 100MHz 8 100MHz 600mA 0.18Ω 5300MHz
LQG15HN5N6S02p5.6nH ±0.3nH 100MHz 8 100MHz 600mA 0.18Ω 5300MHz
LQG15HN6N2B02p6.2nH ±0.1nH 100MHz 8 100MHz 600mA 0.19Ω 4300MHz
LQG15HN6N2C02p6.2nH ±0.2nH 100MHz 8 100MHz 600mA 0.19Ω 4300MHz
LQG15HN6N2S02p6.2nH ±0.3nH 100MHz 8 100MHz 600mA 0.19Ω 4300MHz
LQG15HN6N8G02p6.8nH ±2% 100MHz 8 100MHz 600mA 0.21Ω 4200MHz
LQG15HN6N8H02p6.8nH ±3% 100MHz 8 100MHz 600mA 0.21Ω 4200MHz
LQG15HN6N8J02p6.8nH ±5% 100MHz 8 100MHz 600mA 0.21Ω 4200MHz
LQG15HN7N5G02p7.5nH ±2% 100MHz 8 100MHz 500mA 0.24Ω 3900MHz
LQG15HN7N5H02p7.5nH ±3% 100MHz 8 100MHz 500mA 0.24Ω 3900MHz
LQG15HN7N5J02p7.5nH ±5% 100MHz 8 100MHz 500mA 0.24Ω 3900MHz
LQG15HN8N2G02p8.2nH ±2% 100MHz 8 100MHz 500mA 0.25Ω 3600MHz
LQG15HN8N2H02p8.2nH ±3% 100MHz 8 100MHz 500mA 0.25Ω 3600MHz
LQG15HN8N2J02p8.2nH ±5% 100MHz 8 100MHz 500mA 0.25Ω 3600MHz
LQG15HN9N1G02p9.1nH ±2% 100MHz 8 100MHz 500mA 0.27Ω 3400MHz
LQG15HN9N1H02p9.1nH ±3% 100MHz 8 100MHz 500mA 0.27Ω 3400MHz
LQG15HN9N1J02p9.1nH ±5% 100MHz 8 100MHz 500mA 0.27Ω 3400MHz
LQG15HN10NG02p10nH ±2% 100MHz 8 100MHz 500mA 0.29Ω 3200MHz
LQG15HN10NH02p10nH ±3% 100MHz 8 100MHz 500mA 0.29Ω 3200MHz
LQG15HN10NJ02p10nH ±5% 100MHz 8 100MHz 500mA 0.29Ω 3200MHz
LQG15HN12NG02p12nH ±2% 100MHz 8 100MHz 400mA 0.40Ω 2800MHz
LQG15HN12NH02p12nH ±3% 100MHz 8 100MHz 400mA 0.40Ω 2800MHz
LQG15HN12NJ02p12nH ±5% 100MHz 8 100MHz 400mA 0.40Ω 2800MHz
LQG15HN15NG02p15nH ±2% 100MHz 8 100MHz 400mA 0.45Ω 2300MHz
LQG15HN15NH02p15nH ±3% 100MHz 8 100MHz 400mA 0.45Ω 2300MHz
LQG15HN15NJ02p15nH ±5% 100MHz 8 100MHz 400mA 0.45Ω 2300MHz
LQG15HN18NG02p18nH ±2% 100MHz 8 100MHz 350mA 0.51Ω 2100MHz
LQG15HN18NH02p18nH ±3% 100MHz 8 100MHz 350mA 0.51Ω 2100MHz
LQG15HN18NJ02p18nH ±5% 100MHz 8 100MHz 350mA 0.51Ω 2100MHz
LQG15HN22NG02p22nH ±2% 100MHz 8 100MHz 350mA 0.58Ω 1800MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
202
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQG15HN22NH02p22nH ±3% 100MHz 8 100MHz 350mA 0.58Ω 1800MHz
LQG15HN22NJ02p22nH ±5% 100MHz 8 100MHz 350mA 0.58Ω 1800MHz
LQG15HN27NG02p27nH ±2% 100MHz 8 100MHz 300mA 0.67Ω 1600MHz
LQG15HN27NH02p27nH ±3% 100MHz 8 100MHz 300mA 0.67Ω 1600MHz
LQG15HN27NJ02p27nH ±5% 100MHz 8 100MHz 300mA 0.67Ω 1600MHz
LQG15HN33NG02p33nH ±2% 100MHz 8 100MHz 300mA 0.67Ω 1500MHz
LQG15HN33NH02p33nH ±3% 100MHz 8 100MHz 300mA 0.67Ω 1500MHz
LQG15HN33NJ02p33nH ±5% 100MHz 8 100MHz 300mA 0.67Ω 1500MHz
LQG15HN39NG02p39nH ±2% 100MHz 8 100MHz 250mA 1.06Ω 1200MHz
LQG15HN39NH02p39nH ±3% 100MHz 8 100MHz 250mA 1.06Ω 1200MHz
LQG15HN39NJ02p39nH ±5% 100MHz 8 100MHz 250mA 1.06Ω 1200MHz
LQG15HN47NG02p47nH ±2% 100MHz 8 100MHz 250mA 1.15Ω 1000MHz
LQG15HN47NH02p47nH ±3% 100MHz 8 100MHz 250mA 1.15Ω 1000MHz
LQG15HN47NJ02p47nH ±5% 100MHz 8 100MHz 250mA 1.15Ω 1000MHz
LQG15HN56NG02p56nH ±2% 100MHz 8 100MHz 200mA 1.20Ω 800MHz
LQG15HN56NH02p56nH ±3% 100MHz 8 100MHz 200mA 1.20Ω 800MHz
LQG15HN56NJ02p56nH ±5% 100MHz 8 100MHz 200mA 1.20Ω 800MHz
LQG15HN68NG02p68nH ±2% 100MHz 8 100MHz 200mA 1.25Ω 800MHz
LQG15HN68NH02p68nH ±3% 100MHz 8 100MHz 200mA 1.25Ω 800MHz
LQG15HN68NJ02p68nH ±5% 100MHz 8 100MHz 200mA 1.25Ω 800MHz
LQG15HN82NG02p82nH ±2% 100MHz 8 100MHz 200mA 1.60Ω 600MHz
LQG15HN82NH02p82nH ±3% 100MHz 8 100MHz 200mA 1.60Ω 600MHz
LQG15HN82NJ02p82nH ±5% 100MHz 8 100MHz 200mA 1.60Ω 600MHz
LQG15HNR10G02p100nH ±2% 100MHz 8 100MHz 200mA 1.60Ω 600MHz
LQG15HNR10H02p100nH ±3% 100MHz 8 100MHz 200mA 1.60Ω 600MHz
LQG15HNR10J02p100nH ±5% 100MHz 8 100MHz 200mA 1.60Ω 600MHz
LQG15HNR12G02p120nH ±2% 100MHz 8 100MHz 150mA 1.60Ω 600MHz
LQG15HNR12H02p120nH ±3% 100MHz 8 100MHz 150mA 1.60Ω 600MHz
LQG15HNR12J02p120nH ±5% 100MHz 8 100MHz 150mA 1.60Ω 600MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
203
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQG15HS_02 Series 0402 (1005) inch (mm)
Appearance/Dimensions
0.5±0.05
0.5±0.051.0±0.05
0.25±0.1 Polarity Marking
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
Jø330mm Paper Taping 50000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQG15HS1N0B02p1.0nH ±0.1nH 100MHz 8 100MHz 1000mA 0.07Ω 10000MHz
LQG15HS1N0C02p1.0nH ±0.2nH 100MHz 8 100MHz 1000mA 0.07Ω 10000MHz
LQG15HS1N0S02p1.0nH ±0.3nH 100MHz 8 100MHz 1000mA 0.07Ω 10000MHz
LQG15HS1N1B02p1.1nH ±0.1nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N1C02p1.1nH ±0.2nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N1S02p1.1nH ±0.3nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N2B02p1.2nH ±0.1nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N2C02p1.2nH ±0.2nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N2S02p1.2nH ±0.3nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N3B02p1.3nH ±0.1nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N3C02p1.3nH ±0.2nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N3S02p1.3nH ±0.3nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N5B02p1.5nH ±0.1nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N5C02p1.5nH ±0.2nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N5S02p1.5nH ±0.3nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N6B02p1.6nH ±0.1nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N6C02p1.6nH ±0.2nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N6S02p1.6nH ±0.3nH 100MHz 8 100MHz 1000mA 0.07Ω 6000MHz
LQG15HS1N8B02p1.8nH ±0.1nH 100MHz 8 100MHz 950mA 0.08Ω 6000MHz
LQG15HS1N8C02p1.8nH ±0.2nH 100MHz 8 100MHz 950mA 0.08Ω 6000MHz
LQG15HS1N8S02p1.8nH ±0.3nH 100MHz 8 100MHz 950mA 0.08Ω 6000MHz
LQG15HS2N0B02p2.0nH ±0.1nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HS2N0C02p2.0nH ±0.2nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HS2N0S02p2.0nH ±0.3nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HS2N2B02p2.2nH ±0.1nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HS2N2C02p2.2nH ±0.2nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HS2N2S02p2.2nH ±0.3nH 100MHz 8 100MHz 900mA 0.09Ω 6000MHz
LQG15HS2N4B02p2.4nH ±0.1nH 100MHz 8 100MHz 850mA 0.11Ω 6000MHz
LQG15HS2N4C02p2.4nH ±0.2nH 100MHz 8 100MHz 850mA 0.11Ω 6000MHz
LQG15HS2N4S02p2.4nH ±0.3nH 100MHz 8 100MHz 850mA 0.11Ω 6000MHz
LQG15HS2N7B02p2.7nH ±0.1nH 100MHz 8 100MHz 800mA 0.12Ω 6000MHz
LQG15HS2N7C02p2.7nH ±0.2nH 100MHz 8 100MHz 800mA 0.12Ω 6000MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
204
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQG15HS2N7S02p2.7nH ±0.3nH 100MHz 8 100MHz 800mA 0.12Ω 6000MHz
LQG15HS3N0B02p3.0nH ±0.1nH 100MHz 8 100MHz 800mA 0.125Ω 6000MHz
LQG15HS3N0C02p3.0nH ±0.2nH 100MHz 8 100MHz 800mA 0.125Ω 6000MHz
LQG15HS3N0S02p3.0nH ±0.3nH 100MHz 8 100MHz 800mA 0.125Ω 6000MHz
LQG15HS3N3B02p3.3nH ±0.1nH 100MHz 8 100MHz 800mA 0.125Ω 6000MHz
LQG15HS3N3C02p3.3nH ±0.2nH 100MHz 8 100MHz 800mA 0.125Ω 6000MHz
LQG15HS3N3S02p3.3nH ±0.3nH 100MHz 8 100MHz 800mA 0.125Ω 6000MHz
LQG15HS3N6B02p3.6nH ±0.1nH 100MHz 8 100MHz 750mA 0.14Ω 6000MHz
LQG15HS3N6C02p3.6nH ±0.2nH 100MHz 8 100MHz 750mA 0.14Ω 6000MHz
LQG15HS3N6S02p3.6nH ±0.3nH 100MHz 8 100MHz 750mA 0.14Ω 6000MHz
LQG15HS3N9B02p3.9nH ±0.1nH 100MHz 8 100MHz 750mA 0.14Ω 6000MHz
LQG15HS3N9C02p3.9nH ±0.2nH 100MHz 8 100MHz 750mA 0.14Ω 6000MHz
LQG15HS3N9S02p3.9nH ±0.3nH 100MHz 8 100MHz 750mA 0.14Ω 6000MHz
LQG15HS4N3B02p4.3nH ±0.1nH 100MHz 8 100MHz 750mA 0.14Ω 6000MHz
LQG15HS4N3C02p4.3nH ±0.2nH 100MHz 8 100MHz 750mA 0.14Ω 6000MHz
LQG15HS4N3S02p4.3nH ±0.3nH 100MHz 8 100MHz 750mA 0.14Ω 6000MHz
LQG15HS4N7B02p4.7nH ±0.1nH 100MHz 8 100MHz 700mA 0.16Ω 6000MHz
LQG15HS4N7C02p4.7nH ±0.2nH 100MHz 8 100MHz 700mA 0.16Ω 6000MHz
LQG15HS4N7S02p4.7nH ±0.3nH 100MHz 8 100MHz 700mA 0.16Ω 6000MHz
LQG15HS5N1B02p5.1nH ±0.1nH 100MHz 8 100MHz 650mA 0.18Ω 5300MHz
LQG15HS5N1C02p5.1nH ±0.2nH 100MHz 8 100MHz 650mA 0.18Ω 5300MHz
LQG15HS5N1S02p5.1nH ±0.3nH 100MHz 8 100MHz 650mA 0.18Ω 5300MHz
LQG15HS5N6B02p5.6nH ±0.1nH 100MHz 8 100MHz 650mA 0.18Ω 4500MHz
LQG15HS5N6C02p5.6nH ±0.2nH 100MHz 8 100MHz 650mA 0.18Ω 4500MHz
LQG15HS5N6S02p5.6nH ±0.3nH 100MHz 8 100MHz 650mA 0.18Ω 4500MHz
LQG15HS6N2B02p6.2nH ±0.1nH 100MHz 8 100MHz 600mA 0.2Ω 4500MHz
LQG15HS6N2C02p6.2nH ±0.2nH 100MHz 8 100MHz 600mA 0.2Ω 4500MHz
LQG15HS6N2S02p6.2nH ±0.3nH 100MHz 8 100MHz 600mA 0.2Ω 4500MHz
LQG15HS6N8G02p6.8nH ±2% 100MHz 8 100MHz 600mA 0.22Ω 4500MHz
LQG15HS6N8H02p6.8nH ±3% 100MHz 8 100MHz 600mA 0.22Ω 4500MHz
LQG15HS6N8J02p6.8nH ±5% 100MHz 8 100MHz 600mA 0.22Ω 4500MHz
LQG15HS7N5G02p7.5nH ±2% 100MHz 8 100MHz 550mA 0.24Ω 4200MHz
LQG15HS7N5H02p7.5nH ±3% 100MHz 8 100MHz 550mA 0.24Ω 4200MHz
LQG15HS7N5J02p7.5nH ±5% 100MHz 8 100MHz 550mA 0.24Ω 4200MHz
LQG15HS8N2G02p8.2nH ±2% 100MHz 8 100MHz 550mA 0.24Ω 3700MHz
LQG15HS8N2H02p8.2nH ±3% 100MHz 8 100MHz 550mA 0.24Ω 3700MHz
LQG15HS8N2J02p8.2nH ±5% 100MHz 8 100MHz 550mA 0.24Ω 3700MHz
LQG15HS9N1G02p9.1nH ±2% 100MHz 8 100MHz 500mA 0.26Ω 3400MHz
LQG15HS9N1H02p9.1nH ±3% 100MHz 8 100MHz 500mA 0.26Ω 3400MHz
LQG15HS9N1J02p9.1nH ±5% 100MHz 8 100MHz 500mA 0.26Ω 3400MHz
LQG15HS10NG02p10nH ±2% 100MHz 8 100MHz 500mA 0.26Ω 3400MHz
LQG15HS10NH02p10nH ±3% 100MHz 8 100MHz 500mA 0.26Ω 3400MHz
LQG15HS10NJ02p10nH ±5% 100MHz 8 100MHz 500mA 0.26Ω 3400MHz
LQG15HS12NG02p12nH ±2% 100MHz 8 100MHz 500mA 0.28Ω 3000MHz
LQG15HS12NH02p12nH ±3% 100MHz 8 100MHz 500mA 0.28Ω 3000MHz
LQG15HS12NJ02p12nH ±5% 100MHz 8 100MHz 500mA 0.28Ω 3000MHz
LQG15HS15NG02p15nH ±2% 100MHz 8 100MHz 450mA 0.32Ω 2500MHz
LQG15HS15NH02p15nH ±3% 100MHz 8 100MHz 450mA 0.32Ω 2500MHz
LQG15HS15NJ02p15nH ±5% 100MHz 8 100MHz 450mA 0.32Ω 2500MHz
LQG15HS18NG02p18nH ±2% 100MHz 8 100MHz 400mA 0.36Ω 2200MHz
LQG15HS18NH02p18nH ±3% 100MHz 8 100MHz 400mA 0.36Ω 2200MHz
LQG15HS18NJ02p18nH ±5% 100MHz 8 100MHz 400mA 0.36Ω 2200MHz
LQG15HS22NG02p22nH ±2% 100MHz 8 100MHz 350mA 0.42Ω 1900MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
205
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQG15HS22NH02p22nH ±3% 100MHz 8 100MHz 350mA 0.42Ω 1900MHz
LQG15HS22NJ02p22nH ±5% 100MHz 8 100MHz 350mA 0.42Ω 1900MHz
LQG15HS27NG02p27nH ±2% 100MHz 8 100MHz 350mA 0.46Ω 1700MHz
LQG15HS27NH02p27nH ±3% 100MHz 8 100MHz 350mA 0.46Ω 1700MHz
LQG15HS27NJ02p27nH ±5% 100MHz 8 100MHz 350mA 0.46Ω 1700MHz
LQG15HS33NG02p33nH ±2% 100MHz 8 100MHz 350mA 0.58Ω 1600MHz
LQG15HS33NH02p33nH ±3% 100MHz 8 100MHz 350mA 0.58Ω 1600MHz
LQG15HS33NJ02p33nH ±5% 100MHz 8 100MHz 350mA 0.58Ω 1600MHz
LQG15HS39NG02p39nH ±2% 100MHz 8 100MHz 300mA 0.65Ω 1200MHz
LQG15HS39NH02p39nH ±3% 100MHz 8 100MHz 300mA 0.65Ω 1200MHz
LQG15HS39NJ02p39nH ±5% 100MHz 8 100MHz 300mA 0.65Ω 1200MHz
LQG15HS47NG02p47nH ±2% 100MHz 8 100MHz 300mA 0.72Ω 1000MHz
LQG15HS47NH02p47nH ±3% 100MHz 8 100MHz 300mA 0.72Ω 1000MHz
LQG15HS47NJ02p47nH ±5% 100MHz 8 100MHz 300mA 0.72Ω 1000MHz
LQG15HS56NG02p56nH ±2% 100MHz 8 100MHz 250mA 0.82Ω 800MHz
LQG15HS56NH02p56nH ±3% 100MHz 8 100MHz 250mA 0.82Ω 800MHz
LQG15HS56NJ02p56nH ±5% 100MHz 8 100MHz 250mA 0.82Ω 800MHz
LQG15HS68NG02p68nH ±2% 100MHz 8 100MHz 250mA 0.92Ω 800MHz
LQG15HS68NH02p68nH ±3% 100MHz 8 100MHz 250mA 0.92Ω 800MHz
LQG15HS68NJ02p68nH ±5% 100MHz 8 100MHz 250mA 0.92Ω 800MHz
LQG15HS82NG02p82nH ±2% 100MHz 8 100MHz 200mA 1.2Ω 700MHz
LQG15HS82NH02p82nH ±3% 100MHz 8 100MHz 200mA 1.2Ω 700MHz
LQG15HS82NJ02p82nH ±5% 100MHz 8 100MHz 200mA 1.2Ω 700MHz
LQG15HSR10G02p100nH ±2% 100MHz 8 100MHz 200mA 1.25Ω 600MHz
LQG15HSR10H02p100nH ±3% 100MHz 8 100MHz 200mA 1.25Ω 600MHz
LQG15HSR10J02p100nH ±5% 100MHz 8 100MHz 200mA 1.25Ω 600MHz
LQG15HSR12G02p120nH ±2% 100MHz 8 100MHz 200mA 1.3Ω 600MHz
LQG15HSR12H02p120nH ±3% 100MHz 8 100MHz 200mA 1.3Ω 600MHz
LQG15HSR12J02p120nH ±5% 100MHz 8 100MHz 200mA 1.3Ω 600MHz
LQG15HSR15G02p150nH ±2% 100MHz 8 100MHz 150mA 2.99Ω 550MHz
LQG15HSR15H02p150nH ±3% 100MHz 8 100MHz 150mA 2.99Ω 550MHz
LQG15HSR15J02p150nH ±5% 100MHz 8 100MHz 150mA 2.99Ω 550MHz
LQG15HSR18G02p180nH ±2% 100MHz 8 100MHz 150mA 3.38Ω 500MHz
LQG15HSR18H02p180nH ±3% 100MHz 8 100MHz 150mA 3.38Ω 500MHz
LQG15HSR18J02p180nH ±5% 100MHz 8 100MHz 150mA 3.38Ω 500MHz
LQG15HSR22G02p220nH ±2% 100MHz 8 100MHz 120mA 3.77Ω 450MHz
LQG15HSR22H02p220nH ±3% 100MHz 8 100MHz 120mA 3.77Ω 450MHz
LQG15HSR22J02p220nH ±5% 100MHz 8 100MHz 120mA 3.77Ω 450MHz
LQG15HSR27G02p270nH ±2% 100MHz 8 100MHz 110mA 4.94Ω 400MHz
LQG15HSR27H02p270nH ±3% 100MHz 8 100MHz 110mA 4.94Ω 400MHz
LQG15HSR27J02p270nH ±5% 100MHz 8 100MHz 110mA 4.94Ω 400MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
206
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
207
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQG18HN_00 Series 0603 (1608) inch (mm)
Appearance/Dimensions
Polarity Marking
(in mm)
0.8±0.15
0.8±0.15
1.6±0.15
0.3±0.2
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 1000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQG18HN1N2S00p1.2nH ±0.3nH 100MHz 12 100MHz 1100mA 0.10Ω 6000MHz
LQG18HN1N5S00p1.5nH ±0.3nH 100MHz 12 100MHz 1100mA 0.10Ω 6000MHz
LQG18HN1N8S00p1.8nH ±0.3nH 100MHz 12 100MHz 1100mA 0.10Ω 6000MHz
LQG18HN2N2S00p2.2nH ±0.3nH 100MHz 12 100MHz 1100mA 0.10Ω 6000MHz
LQG18HN2N7S00p2.7nH ±0.3nH 100MHz 12 100MHz 1000mA 0.12Ω 6000MHz
LQG18HN3N3S00p3.3nH ±0.3nH 100MHz 12 100MHz 1000mA 0.12Ω 6000MHz
LQG18HN3N9S00p3.9nH ±0.3nH 100MHz 12 100MHz 900mA 0.15Ω 6000MHz
LQG18HN4N7S00p4.7nH ±0.3nH 100MHz 12 100MHz 900mA 0.15Ω 6000MHz
LQG18HN5N6S00p5.6nH ±0.3nH 100MHz 12 100MHz 800mA 0.20Ω 5000MHz
LQG18HN6N8J00p6.8nH ±5% 100MHz 12 100MHz 800mA 0.20Ω 5000MHz
LQG18HN8N2J00p8.2nH ±5% 100MHz 12 100MHz 800mA 0.20Ω 4000MHz
LQG18HN10NJ00p10nH ±5% 100MHz 12 100MHz 650mA 0.30Ω 3500MHz
LQG18HN12NJ00p12nH ±5% 100MHz 12 100MHz 600mA 0.35Ω 3000MHz
LQG18HN15NJ00p15nH ±5% 100MHz 12 100MHz 600mA 0.35Ω 2800MHz
LQG18HN18NJ00p18nH ±5% 100MHz 12 100MHz 600mA 0.37Ω 2600MHz
LQG18HN22NJ00p22nH ±5% 100MHz 12 100MHz 500mA 0.50Ω 2300MHz
LQG18HN27NJ00p27nH ±5% 100MHz 12 100MHz 500mA 0.54Ω 2000MHz
LQG18HN33NJ00p33nH ±5% 100MHz 12 100MHz 500mA 0.54Ω 1700MHz
LQG18HN39NJ00p39nH ±5% 100MHz 12 100MHz 450mA 0.60Ω 1500MHz
LQG18HN47NJ00p47nH ±5% 100MHz 12 100MHz 400mA 0.70Ω 1200MHz
LQG18HN56NJ00p56nH ±5% 100MHz 12 100MHz 400mA 0.75Ω 1100MHz
LQG18HN68NJ00p68nH ±5% 100MHz 12 100MHz 400mA 0.80Ω 1000MHz
LQG18HN82NJ00p82nH ±5% 100MHz 12 100MHz 350mA 0.85Ω 900MHz
LQG18HNR10J00p100nH ±5% 100MHz 12 100MHz 350mA 0.90Ω 800MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
208
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
209
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP02HQ_02 Series 01005 (0402) inch (mm)
Appearance/Dimensions
(in mm)
0.4±0.02
0.2±0.02
0.30±0.02
0.14±0.03
0.14±0.03
Packaging
Code Packaging Minimum
Quantity
Eø180mm Embossed Taping 15000
Lø180mm Embossed Taping 30000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02HQ0N2W02p0.2nH ±0.05nH 500MHz - 500MHz 1000mA 0.01Ω 17GHz
LQP02HQ0N2B02p0.2nH ±0.1nH 500MHz - 500MHz 1000mA 0.01Ω 17GHz
LQP02HQ0N2C02p0.2nH ±0.2nH 500MHz - 500MHz 1000mA 0.01Ω 17GHz
LQP02HQ0N3W02p0.3nH ±0.05nH 500MHz - 500MHz 1000mA 0.02Ω 17GHz
LQP02HQ0N3B02p0.3nH ±0.1nH 500MHz - 500MHz 1000mA 0.02Ω 17GHz
LQP02HQ0N3C02p0.3nH ±0.2nH 500MHz - 500MHz 1000mA 0.02Ω 17GHz
LQP02HQ0N4W02p0.4nH ±0.05nH 500MHz 14 500MHz 1000mA 0.03Ω 17GHz
LQP02HQ0N4B02p0.4nH ±0.1nH 500MHz 14 500MHz 1000mA 0.03Ω 17GHz
LQP02HQ0N4C02p0.4nH ±0.2nH 500MHz 14 500MHz 1000mA 0.03Ω 17GHz
LQP02HQ0N5W02p0.5nH ±0.05nH 500MHz 14 500MHz 1000mA 0.04Ω 17GHz
LQP02HQ0N5B02p0.5nH ±0.1nH 500MHz 14 500MHz 1000mA 0.04Ω 17GHz
LQP02HQ0N5C02p0.5nH ±0.2nH 500MHz 14 500MHz 1000mA 0.04Ω 17GHz
LQP02HQ0N6W02p0.6nH ±0.05nH 500MHz 14 500MHz 950mA 0.05Ω 17GHz
LQP02HQ0N6B02p0.6nH ±0.1nH 500MHz 14 500MHz 950mA 0.05Ω 17GHz
LQP02HQ0N6C02p0.6nH ±0.2nH 500MHz 14 500MHz 950mA 0.05Ω 17GHz
LQP02HQ0N7W02p0.7nH ±0.05nH 500MHz 14 500MHz 900mA 0.05Ω 15.5GHz
LQP02HQ0N7B02p0.7nH ±0.1nH 500MHz 14 500MHz 900mA 0.05Ω 15.5GHz
LQP02HQ0N7C02p0.7nH ±0.2nH 500MHz 14 500MHz 900mA 0.05Ω 15.5GHz
LQP02HQ0N8W02p0.8nH ±0.05nH 500MHz 14 500MHz 900mA 0.05Ω 15.5GHz
LQP02HQ0N8B02p0.8nH ±0.1nH 500MHz 14 500MHz 900mA 0.05Ω 15.5GHz
LQP02HQ0N8C02p0.8nH ±0.2nH 500MHz 14 500MHz 900mA 0.05Ω 15.5GHz
LQP02HQ0N9W02p0.9nH ±0.05nH 500MHz 14 500MHz 900mA 0.05Ω 14.6GHz
LQP02HQ0N9B02p0.9nH ±0.1nH 500MHz 14 500MHz 900mA 0.05Ω 14.6GHz
LQP02HQ0N9C02p0.9nH ±0.2nH 500MHz 14 500MHz 900mA 0.05Ω 14.6GHz
LQP02HQ1N0W02p1.0nH ±0.05nH 500MHz 14 500MHz 900mA 0.05Ω 13.2GHz
LQP02HQ1N0B02p1.0nH ±0.1nH 500MHz 14 500MHz 900mA 0.05Ω 13.2GHz
LQP02HQ1N0C02p1.0nH ±0.2nH 500MHz 14 500MHz 900mA 0.05Ω 13.2GHz
LQP02HQ1N1W02p1.1nH ±0.05nH 500MHz 14 500MHz 850mA 1.1Ω 12.8GHz
LQP02HQ1N1B02p1.1nH ±0.1nH 500MHz 14 500MHz 850mA 1.1Ω 12.8GHz
LQP02HQ1N1C02p1.1nH ±0.2nH 500MHz 14 500MHz 850mA 1.1Ω 12.8GHz
LQP02HQ1N2W02p1.2nH ±0.05nH 500MHz 14 500MHz 800mA 1.1Ω 12.8GHz
LQP02HQ1N2B02p1.2nH ±0.1nH 500MHz 14 500MHz 800mA 1.1Ω 12.8GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
210
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02HQ1N2C02p1.2nH ±0.2nH 500MHz 14 500MHz 800mA 1.1Ω 12.8GHz
LQP02HQ1N3W02p1.3nH ±0.05nH 500MHz 14 500MHz 700mA 0.08Ω 12.7GHz
LQP02HQ1N3B02p1.3nH ±0.1nH 500MHz 14 500MHz 700mA 0.08Ω 12.7GHz
LQP02HQ1N3C02p1.3nH ±0.2nH 500MHz 14 500MHz 700mA 0.08Ω 12.7GHz
LQP02HQ1N4W02p1.4nH ±0.05nH 500MHz 14 500MHz 700mA 0.08Ω 12.7GHz
LQP02HQ1N4B02p1.4nH ±0.1nH 500MHz 14 500MHz 700mA 0.08Ω 12.7GHz
LQP02HQ1N4C02p1.4nH ±0.2nH 500MHz 14 500MHz 700mA 0.08Ω 12.7GHz
LQP02HQ1N5W02p1.5nH ±0.05nH 500MHz 14 500MHz 700mA 0.08Ω 12.7GHz
LQP02HQ1N5B02p1.5nH ±0.1nH 500MHz 14 500MHz 700mA 0.08Ω 12.7GHz
LQP02HQ1N5C02p1.5nH ±0.2nH 500MHz 14 500MHz 700mA 0.08Ω 12.7GHz
LQP02HQ1N6B02p1.6nH ±0.1nH 500MHz 14 500MHz 700mA 0.08Ω 10.7GHz
LQP02HQ1N6C02p1.6nH ±0.2nH 500MHz 14 500MHz 700mA 0.08Ω 10.7GHz
LQP02HQ1N7B02p1.7nH ±0.1nH 500MHz 14 500MHz 700mA 0.08Ω 10.7GHz
LQP02HQ1N7C02p1.7nH ±0.2nH 500MHz 14 500MHz 700mA 0.08Ω 10.7GHz
LQP02HQ1N8B02p1.8nH ±0.1nH 500MHz 14 500MHz 700mA 0.08Ω 10.2GHz
LQP02HQ1N8C02p1.8nH ±0.2nH 500MHz 14 500MHz 700mA 0.08Ω 10.2GHz
LQP02HQ1N9B02p1.9nH ±0.1nH 500MHz 14 500MHz 700mA 0.08Ω 10.2GHz
LQP02HQ1N9C02p1.9nH ±0.2nH 500MHz 14 500MHz 700mA 0.08Ω 10.2GHz
LQP02HQ2N0B02p2.0nH ±0.1nH 500MHz 14 500MHz 700mA 0.1Ω 10.1GHz
LQP02HQ2N0C02p2.0nH ±0.2nH 500MHz 14 500MHz 700mA 0.1Ω 10.1GHz
LQP02HQ2N1B02p2.1nH ±0.1nH 500MHz 14 500MHz 650mA 0.1Ω 10.1GHz
LQP02HQ2N1C02p2.1nH ±0.2nH 500MHz 14 500MHz 650mA 0.1Ω 10.1GHz
LQP02HQ2N2B02p2.2nH ±0.1nH 500MHz 14 500MHz 500mA 0.2Ω 9.8GHz
LQP02HQ2N2C02p2.2nH ±0.2nH 500MHz 14 500MHz 500mA 0.2Ω 9.8GHz
LQP02HQ2N3B02p2.3nH ±0.1nH 500MHz 14 500MHz 450mA 0.2Ω 9.8GHz
LQP02HQ2N3C02p2.3nH ±0.2nH 500MHz 14 500MHz 450mA 0.2Ω 9.8GHz
LQP02HQ2N4B02p2.4nH ±0.1nH 500MHz 14 500MHz 450mA 0.2Ω 9.5GHz
LQP02HQ2N4C02p2.4nH ±0.2nH 500MHz 14 500MHz 450mA 0.2Ω 9.5GHz
LQP02HQ2N5B02p2.5nH ±0.1nH 500MHz 14 500MHz 450mA 0.2Ω 9.5GHz
LQP02HQ2N5C02p2.5nH ±0.2nH 500MHz 14 500MHz 450mA 0.2Ω 9.5GHz
LQP02HQ2N6B02p2.6nH ±0.1nH 500MHz 14 500MHz 450mA 0.2Ω 9.5GHz
LQP02HQ2N6C02p2.6nH ±0.2nH 500MHz 14 500MHz 450mA 0.2Ω 9.5GHz
LQP02HQ2N7B02p2.7nH ±0.1nH 500MHz 14 500MHz 450mA 0.2Ω 8.8GHz
LQP02HQ2N7C02p2.7nH ±0.2nH 500MHz 14 500MHz 450mA 0.2Ω 8.8GHz
LQP02HQ2N8B02p2.8nH ±0.1nH 500MHz 14 500MHz 450mA 0.2Ω 8.8GHz
LQP02HQ2N8C02p2.8nH ±0.2nH 500MHz 14 500MHz 450mA 0.2Ω 8.8GHz
LQP02HQ2N9B02p2.9nH ±0.1nH 500MHz 14 500MHz 450mA 0.2Ω 8.8GHz
LQP02HQ2N9C02p2.9nH ±0.2nH 500MHz 14 500MHz 450mA 0.2Ω 8.8GHz
LQP02HQ3N0B02p3.0nH ±0.1nH 500MHz 14 500MHz 450mA 0.2Ω 8.5GHz
LQP02HQ3N0C02p3.0nH ±0.2nH 500MHz 14 500MHz 450mA 0.2Ω 8.5GHz
LQP02HQ3N1B02p3.1nH ±0.1nH 500MHz 14 500MHz 400mA 0.25Ω 8.5GHz
LQP02HQ3N1C02p3.1nH ±0.2nH 500MHz 14 500MHz 400mA 0.25Ω 8.5GHz
LQP02HQ3N2B02p3.2nH ±0.1nH 500MHz 14 500MHz 400mA 0.25Ω 8.5GHz
LQP02HQ3N2C02p3.2nH ±0.2nH 500MHz 14 500MHz 400mA 0.25Ω 8.5GHz
LQP02HQ3N3B02p3.3nH ±0.1nH 500MHz 14 500MHz 400mA 0.25Ω 8.2GHz
LQP02HQ3N3C02p3.3nH ±0.2nH 500MHz 14 500MHz 400mA 0.25Ω 8.2GHz
LQP02HQ3N4B02p3.4nH ±0.1nH 500MHz 14 500MHz 400mA 0.3Ω 8.2GHz
LQP02HQ3N4C02p3.4nH ±0.2nH 500MHz 14 500MHz 400mA 0.3Ω 8.2GHz
LQP02HQ3N5B02p3.5nH ±0.1nH 500MHz 14 500MHz 350mA 0.3Ω 8.2GHz
LQP02HQ3N5C02p3.5nH ±0.2nH 500MHz 14 500MHz 350mA 0.3Ω 8.2GHz
LQP02HQ3N6B02p3.6nH ±0.1nH 500MHz 14 500MHz 350mA 0.3Ω 8.2GHz
LQP02HQ3N6C02p3.6nH ±0.2nH 500MHz 14 500MHz 350mA 0.3Ω 8.2GHz
LQP02HQ3N7B02p3.7nH ±0.1nH 500MHz 14 500MHz 350mA 0.35Ω 8.2GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
211
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02HQ3N7C02p3.7nH ±0.2nH 500MHz 14 500MHz 350mA 0.35Ω 8.2GHz
LQP02HQ3N8B02p3.8nH ±0.1nH 500MHz 14 500MHz 350mA 0.35Ω 8.2GHz
LQP02HQ3N8C02p3.8nH ±0.2nH 500MHz 14 500MHz 350mA 0.35Ω 8.2GHz
LQP02HQ3N9B02p3.9nH ±0.1nH 500MHz 14 500MHz 350mA 0.35Ω 7.7GHz
LQP02HQ3N9C02p3.9nH ±0.2nH 500MHz 14 500MHz 350mA 0.35Ω 7.7GHz
LQP02HQ4N0B02p4.0nH ±0.1nH 500MHz 14 500MHz 350mA 0.35Ω 6.9GHz
LQP02HQ4N0C02p4.0nH ±0.2nH 500MHz 14 500MHz 350mA 0.35Ω 6.9GHz
LQP02HQ4N1B02p4.1nH ±0.1nH 500MHz 14 500MHz 350mA 0.35Ω 6.9GHz
LQP02HQ4N1C02p4.1nH ±0.2nH 500MHz 14 500MHz 350mA 0.35Ω 6.9GHz
LQP02HQ4N2B02p4.2nH ±0.1nH 500MHz 14 500MHz 350mA 0.35Ω 6.9GHz
LQP02HQ4N2C02p4.2nH ±0.2nH 500MHz 14 500MHz 350mA 0.35Ω 6.9GHz
LQP02HQ4N3H02p4.3nH ±3% 500MHz 13 500MHz 350mA 0.35Ω 6.9GHz
LQP02HQ4N3J02p4.3nH ±5% 500MHz 13 500MHz 350mA 0.35Ω 6.9GHz
LQP02HQ4N7H02p4.7nH ±3% 500MHz 13 500MHz 350mA 0.35Ω 6.7GHz
LQP02HQ4N7J02p4.7nH ±5% 500MHz 13 500MHz 350mA 0.35Ω 6.7GHz
LQP02HQ5N1H02p5.1nH ±3% 500MHz 13 500MHz 350mA 0.35Ω 6.6GHz
LQP02HQ5N1J02p5.1nH ±5% 500MHz 13 500MHz 350mA 0.35Ω 6.6GHz
LQP02HQ5N6H02p5.6nH ±3% 500MHz 13 500MHz 300mA 0.4Ω 6.1GHz
LQP02HQ5N6J02p5.6nH ±5% 500MHz 13 500MHz 300mA 0.4Ω 6.1GHz
LQP02HQ6N2H02p6.2nH ±3% 500MHz 13 500MHz 300mA 0.4Ω 6GHz
LQP02HQ6N2J02p6.2nH ±5% 500MHz 13 500MHz 300mA 0.4Ω 6GHz
LQP02HQ6N8H02p6.8nH ±3% 500MHz 13 500MHz 300mA 0.4Ω 5.7GHz
LQP02HQ6N8J02p6.8nH ±5% 500MHz 13 500MHz 300mA 0.4Ω 5.7GHz
LQP02HQ7N5H02p7.5nH ±3% 500MHz 13 500MHz 300mA 0.5Ω 5.6GHz
LQP02HQ7N5J02p7.5nH ±5% 500MHz 13 500MHz 300mA 0.5Ω 5.6GHz
LQP02HQ8N2H02p8.2nH ±3% 500MHz 13 500MHz 300mA 0.5Ω 5.1GHz
LQP02HQ8N2J02p8.2nH ±5% 500MHz 13 500MHz 300mA 0.5Ω 5.1GHz
LQP02HQ9N1H02p9.1nH ±3% 500MHz 13 500MHz 300mA 0.5Ω 4.9GHz
LQP02HQ9N1J02p9.1nH ±5% 500MHz 13 500MHz 300mA 0.5Ω 4.9GHz
LQP02HQ10NH02p10nH ±3% 500MHz 13 500MHz 250mA 0.6Ω 4.9GHz
LQP02HQ10NJ02p10nH ±5% 500MHz 13 500MHz 250mA 0.6Ω 4.9GHz
LQP02HQ11NH02p11nH ±3% 500MHz 13 500MHz 250mA 0.8Ω 4GHz
LQP02HQ11NJ02p11nH ±5% 500MHz 13 500MHz 250mA 0.8Ω 4GHz
LQP02HQ12NH02p12nH ±3% 500MHz 13 500MHz 230mA 0.82Ω 4GHz
LQP02HQ12NJ02p12nH ±5% 500MHz 13 500MHz 230mA 0.82Ω 4GHz
LQP02HQ13NH02p13nH ±3% 500MHz 13 500MHz 210mA 0.99Ω 4GHz
LQP02HQ13NJ02p13nH ±5% 500MHz 13 500MHz 210mA 0.99Ω 4GHz
LQP02HQ15NH02p15nH ±3% 500MHz 13 500MHz 170mA 1.53Ω 4GHz
LQP02HQ15NJ02p15nH ±5% 500MHz 13 500MHz 170mA 1.53Ω 4GHz
LQP02HQ16NH02p16nH ±3% 500MHz 13 500MHz 170mA 1.53Ω 4GHz
LQP02HQ16NJ02p16nH ±5% 500MHz 13 500MHz 170mA 1.53Ω 4GHz
LQP02HQ18NH02p18nH ±3% 500MHz 13 500MHz 160mA 1.63Ω 3.7GHz
LQP02HQ18NJ02p18nH ±5% 500MHz 13 500MHz 160mA 1.63Ω 3.7GHz
LQP02HQ20NH02p20nH ±3% 500MHz 12 500MHz 140mA 2.26Ω 3GHz
LQP02HQ20NJ02p20nH ±5% 500MHz 12 500MHz 140mA 2.26Ω 3GHz
LQP02HQ22NH02p22nH ±3% 500MHz 12 500MHz 140mA 2.26Ω 3GHz
LQP02HQ22NJ02p22nH ±5% 500MHz 12 500MHz 140mA 2.26Ω 3GHz
LQP02HQ24NH02p24nH ±3% 500MHz 12 500MHz 120mA 2.6Ω 2.9GHz
LQP02HQ24NJ02p24nH ±5% 500MHz 12 500MHz 120mA 2.6Ω 2.9GHz
LQP02HQ27NH02p27nH ±3% 500MHz 12 500MHz 120mA 2.6Ω 2.9GHz
LQP02HQ27NJ02p27nH ±5% 500MHz 12 500MHz 120mA 2.6Ω 2.9GHz
LQP02HQ30NH02p30nH ±3% 500MHz 9 500MHz 120mA 3.2Ω 2.6GHz
LQP02HQ30NJ02p30nH ±5% 500MHz 9 500MHz 120mA 3.2Ω 2.6GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
212
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02HQ33NH02p33nH ±3% 300MHz 9 300MHz 120mA 3.2Ω 2.6GHz
LQP02HQ33NJ02p33nH ±5% 300MHz 9 300MHz 120mA 3.2Ω 2.6GHz
LQP02HQ36NH02p36nH ±3% 300MHz 9 300MHz 110mA 3.6Ω 2.4GHz
LQP02HQ36NJ02p36nH ±5% 300MHz 9 300MHz 110mA 3.6Ω 2.4GHz
LQP02HQ39NH02p39nH ±3% 300MHz 9 300MHz 110mA 3.6Ω 2.4GHz
LQP02HQ39NJ02p39nH ±5% 300MHz 9 300MHz 110mA 3.6Ω 2.4GHz
LQP02HQ43NH02p43nH ±3% 300MHz 8 300MHz 100mA 4.0Ω 2.1GHz
LQP02HQ43NJ02p43nH ±5% 300MHz 8 300MHz 100mA 4.0Ω 2.1GHz
LQP02HQ47NH02p47nH ±3% 300MHz 8 300MHz 100mA 4.0Ω 2.1GHz
LQP02HQ47NJ02p47nH ±5% 300MHz 8 300MHz 100mA 4.0Ω 2.1GHz
LQP02HQ51NH02p51nH ±3% 300MHz 8 300MHz 100mA 4.2Ω 1.9GHz
LQP02HQ51NJ02p51nH ±5% 300MHz 8 300MHz 100mA 4.2Ω 1.9GHz
LQP02HQ56NH02p56nH ±3% 300MHz 8 300MHz 100mA 4.2Ω 1.9GHz
LQP02HQ56NJ02p56nH ±5% 300MHz 8 300MHz 100mA 4.2Ω 1.9GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
213
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP02TN_02 Series 01005 (0402) inch (mm)
Appearance/Dimensions
(in mm)
0.2±0.02
0.4±0.02
0.095±0.025
0.2±0.02
Polarity Marking
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 20000
Lø180mm Embossed Taping 40000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02TN0N2B02p0.2nH ±0.1nH 500MHz - 500MHz 320mA 0.50Ω 20000MHz
LQP02TN0N2C02p0.2nH ±0.2nH 500MHz - 500MHz 320mA 0.50Ω 20000MHz
LQP02TN0N3B02p0.3nH ±0.1nH 500MHz - 500MHz 320mA 0.50Ω 20000MHz
LQP02TN0N3C02p0.3nH ±0.2nH 500MHz - 500MHz 320mA 0.50Ω 20000MHz
LQP02TN0N4B02p0.4nH ±0.1nH 500MHz 8 500MHz 320mA 0.50Ω 18000MHz
LQP02TN0N4C02p0.4nH ±0.2nH 500MHz 8 500MHz 320mA 0.50Ω 18000MHz
LQP02TN0N5B02p0.5nH ±0.1nH 500MHz 8 500MHz 320mA 0.50Ω 18000MHz
LQP02TN0N5C02p0.5nH ±0.2nH 500MHz 8 500MHz 320mA 0.50Ω 18000MHz
LQP02TN0N6B02p0.6nH ±0.1nH 500MHz 8 500MHz 320mA 0.50Ω 17000MHz
LQP02TN0N6C02p0.6nH ±0.2nH 500MHz 8 500MHz 320mA 0.50Ω 17000MHz
LQP02TN0N7B02p0.7nH ±0.1nH 500MHz 8 500MHz 320mA 0.50Ω 16500MHz
LQP02TN0N7C02p0.7nH ±0.2nH 500MHz 8 500MHz 320mA 0.50Ω 16500MHz
LQP02TN0N8B02p0.8nH ±0.1nH 500MHz 8 500MHz 320mA 0.50Ω 16500MHz
LQP02TN0N8C02p0.8nH ±0.2nH 500MHz 8 500MHz 320mA 0.50Ω 16500MHz
LQP02TN0N9B02p0.9nH ±0.1nH 500MHz 8 500MHz 320mA 0.50Ω 13000MHz
LQP02TN0N9C02p0.9nH ±0.2nH 500MHz 8 500MHz 320mA 0.50Ω 13000MHz
LQP02TN1N0B02p1.0nH ±0.1nH 500MHz 8 500MHz 220mA 0.60Ω 13000MHz
LQP02TN1N0C02p1.0nH ±0.2nH 500MHz 8 500MHz 220mA 0.60Ω 13000MHz
LQP02TN1N1B02p1.1nH ±0.1nH 500MHz 8 500MHz 220mA 0.60Ω 12500MHz
LQP02TN1N1C02p1.1nH ±0.2nH 500MHz 8 500MHz 220mA 0.60Ω 12500MHz
LQP02TN1N2B02p1.2nH ±0.1nH 500MHz 8 500MHz 220mA 0.60Ω 12500MHz
LQP02TN1N2C02p1.2nH ±0.2nH 500MHz 8 500MHz 220mA 0.60Ω 12500MHz
LQP02TN1N3B02p1.3nH ±0.1nH 500MHz 8 500MHz 220mA 0.60Ω 11500MHz
LQP02TN1N3C02p1.3nH ±0.2nH 500MHz 8 500MHz 220mA 0.60Ω 11500MHz
LQP02TN1N4B02p1.4nH ±0.1nH 500MHz 8 500MHz 220mA 0.60Ω 11500MHz
LQP02TN1N4C02p1.4nH ±0.2nH 500MHz 8 500MHz 220mA 0.60Ω 11500MHz
LQP02TN1N5B02p1.5nH ±0.1nH 500MHz 8 500MHz 220mA 0.60Ω 9500MHz
LQP02TN1N5C02p1.5nH ±0.2nH 500MHz 8 500MHz 220mA 0.60Ω 9500MHz
LQP02TN1N6B02p1.6nH ±0.1nH 500MHz 8 500MHz 220mA 0.60Ω 9500MHz
LQP02TN1N6C02p1.6nH ±0.2nH 500MHz 8 500MHz 220mA 0.60Ω 9500MHz
LQP02TN1N7B02p1.7nH ±0.1nH 500MHz 8 500MHz 200mA 0.70Ω 9500MHz
LQP02TN1N7C02p1.7nH ±0.2nH 500MHz 8 500MHz 200mA 0.70Ω 9500MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
214
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02TN1N8B02p1.8nH ±0.1nH 500MHz 8 500MHz 200mA 0.70Ω 9000MHz
LQP02TN1N8C02p1.8nH ±0.2nH 500MHz 8 500MHz 200mA 0.70Ω 9000MHz
LQP02TN1N9B02p1.9nH ±0.1nH 500MHz 8 500MHz 200mA 0.75Ω 9000MHz
LQP02TN1N9C02p1.9nH ±0.2nH 500MHz 8 500MHz 200mA 0.75Ω 9000MHz
LQP02TN2N0B02p2.0nH ±0.1nH 500MHz 8 500MHz 200mA 0.75Ω 9000MHz
LQP02TN2N0C02p2.0nH ±0.2nH 500MHz 8 500MHz 200mA 0.75Ω 9000MHz
LQP02TN2N1B02p2.1nH ±0.1nH 500MHz 8 500MHz 200mA 0.75Ω 9000MHz
LQP02TN2N1C02p2.1nH ±0.2nH 500MHz 8 500MHz 200mA 0.75Ω 9000MHz
LQP02TN2N2B02p2.2nH ±0.1nH 500MHz 8 500MHz 200mA 0.75Ω 7500MHz
LQP02TN2N2C02p2.2nH ±0.2nH 500MHz 8 500MHz 200mA 0.75Ω 7500MHz
LQP02TN2N3B02p2.3nH ±0.1nH 500MHz 8 500MHz 200mA 0.75Ω 7500MHz
LQP02TN2N3C02p2.3nH ±0.2nH 500MHz 8 500MHz 200mA 0.75Ω 7500MHz
LQP02TN2N4B02p2.4nH ±0.1nH 500MHz 8 500MHz 200mA 0.75Ω 7500MHz
LQP02TN2N4C02p2.4nH ±0.2nH 500MHz 8 500MHz 200mA 0.75Ω 7500MHz
LQP02TN2N5B02p2.5nH ±0.1nH 500MHz 8 500MHz 200mA 0.80Ω 7500MHz
LQP02TN2N5C02p2.5nH ±0.2nH 500MHz 8 500MHz 200mA 0.80Ω 7500MHz
LQP02TN2N6B02p2.6nH ±0.1nH 500MHz 8 500MHz 200mA 0.80Ω 7500MHz
LQP02TN2N6C02p2.6nH ±0.2nH 500MHz 8 500MHz 200mA 0.80Ω 7500MHz
LQP02TN2N7B02p2.7nH ±0.1nH 500MHz 8 500MHz 200mA 0.80Ω 7500MHz
LQP02TN2N7C02p2.7nH ±0.2nH 500MHz 8 500MHz 200mA 0.80Ω 7500MHz
LQP02TN2N8B02p2.8nH ±0.1nH 500MHz 8 500MHz 200mA 1.10Ω 7500MHz
LQP02TN2N8C02p2.8nH ±0.2nH 500MHz 8 500MHz 200mA 1.10Ω 7500MHz
LQP02TN2N9B02p2.9nH ±0.1nH 500MHz 8 500MHz 200mA 1.10Ω 7500MHz
LQP02TN2N9C02p2.9nH ±0.2nH 500MHz 8 500MHz 200mA 1.10Ω 7500MHz
LQP02TN3N0B02p3.0nH ±0.1nH 500MHz 8 500MHz 200mA 1.10Ω 7500MHz
LQP02TN3N0C02p3.0nH ±0.2nH 500MHz 8 500MHz 200mA 1.10Ω 7500MHz
LQP02TN3N1B02p3.1nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N1C02p3.1nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N2B02p3.2nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N2C02p3.2nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N3B02p3.3nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N3C02p3.3nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N4B02p3.4nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N4C02p3.4nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N5B02p3.5nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N5C02p3.5nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N6B02p3.6nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N6C02p3.6nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N7B02p3.7nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N7C02p3.7nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N8B02p3.8nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N8C02p3.8nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N9B02p3.9nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN3N9C02p3.9nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN4N0B02p4.0nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN4N0C02p4.0nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN4N1B02p4.1nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN4N1C02p4.1nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7500MHz
LQP02TN4N2B02p4.2nH ±0.1nH 500MHz 8 500MHz 180mA 1.30Ω 7000MHz
LQP02TN4N2C02p4.2nH ±0.2nH 500MHz 8 500MHz 180mA 1.30Ω 7000MHz
LQP02TN4N3H02p4.3nH ±3% 500MHz 8 500MHz 180mA 1.30Ω 7000MHz
LQP02TN4N3J02p4.3nH ±5% 500MHz 8 500MHz 180mA 1.30Ω 7000MHz
LQP02TN4N7H02p4.7nH ±3% 500MHz 8 500MHz 160mA 1.50Ω 6500MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
215
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02TN4N7J02p4.7nH ±5% 500MHz 8 500MHz 160mA 1.50Ω 6500MHz
LQP02TN5N1H02p5.1nH ±3% 500MHz 8 500MHz 160mA 1.50Ω 6500MHz
LQP02TN5N1J02p5.1nH ±5% 500MHz 8 500MHz 160mA 1.50Ω 6500MHz
LQP02TN5N6H02p5.6nH ±3% 500MHz 8 500MHz 140mA 1.80Ω 6000MHz
LQP02TN5N6J02p5.6nH ±5% 500MHz 8 500MHz 140mA 1.80Ω 6000MHz
LQP02TN6N2H02p6.2nH ±3% 500MHz 8 500MHz 140mA 1.80Ω 5500MHz
LQP02TN6N2J02p6.2nH ±5% 500MHz 8 500MHz 140mA 1.80Ω 5500MHz
LQP02TN6N8H02p6.8nH ±3% 500MHz 8 500MHz 140mA 2.00Ω 5500MHz
LQP02TN6N8J02p6.8nH ±5% 500MHz 8 500MHz 140mA 2.00Ω 5500MHz
LQP02TN7N5H02p7.5nH ±3% 500MHz 8 500MHz 140mA 2.00Ω 4500MHz
LQP02TN7N5J02p7.5nH ±5% 500MHz 8 500MHz 140mA 2.00Ω 4500MHz
LQP02TN8N2H02p8.2nH ±3% 500MHz 8 500MHz 140mA 2.10Ω 4500MHz
LQP02TN8N2J02p8.2nH ±5% 500MHz 8 500MHz 140mA 2.10Ω 4500MHz
LQP02TN9N1H02p9.1nH ±3% 500MHz 8 500MHz 140mA 2.10Ω 4000MHz
LQP02TN9N1J02p9.1nH ±5% 500MHz 8 500MHz 140mA 2.10Ω 4000MHz
LQP02TN10NH02p10nH ±3% 500MHz 8 500MHz 140mA 2.50Ω 4000MHz
LQP02TN10NJ02p10nH ±5% 500MHz 8 500MHz 140mA 2.50Ω 4000MHz
LQP02TN11NH02p11nH ±3% 500MHz 7 500MHz 140mA 2.80Ω 3500MHz
LQP02TN11NJ02p11nH ±5% 500MHz 7 500MHz 140mA 2.80Ω 3500MHz
LQP02TN12NH02p12nH ±3% 500MHz 7 500MHz 140mA 2.80Ω 3500MHz
LQP02TN12NJ02p12nH ±5% 500MHz 7 500MHz 140mA 2.80Ω 3500MHz
LQP02TN13NH02p13nH ±3% 500MHz 7 500MHz 140mA 3.20Ω 3000MHz
LQP02TN13NJ02p13nH ±5% 500MHz 7 500MHz 140mA 3.20Ω 3000MHz
LQP02TN15NH02p15nH ±3% 500MHz 7 500MHz 140mA 3.20Ω 3000MHz
LQP02TN15NJ02p15nH ±5% 500MHz 7 500MHz 140mA 3.20Ω 3000MHz
LQP02TN16NH02p16nH ±3% 500MHz 7 500MHz 140mA 3.50Ω 2500MHz
LQP02TN16NJ02p16nH ±5% 500MHz 7 500MHz 140mA 3.50Ω 2500MHz
LQP02TN18NH02p18nH ±3% 500MHz 7 500MHz 140mA 3.50Ω 2500MHz
LQP02TN18NJ02p18nH ±5% 500MHz 7 500MHz 140mA 3.50Ω 2500MHz
LQP02TN20NH02p20nH ±3% 500MHz 6 500MHz 120mA 5.00Ω 2300MHz
LQP02TN20NJ02p20nH ±5% 500MHz 6 500MHz 120mA 5.00Ω 2300MHz
LQP02TN22NH02p22nH ±3% 500MHz 6 500MHz 120mA 5.00Ω 2300MHz
LQP02TN22NJ02p22nH ±5% 500MHz 6 500MHz 120mA 5.00Ω 2300MHz
LQP02TN24NH02p24nH ±3% 500MHz 6 500MHz 120mA 5.50Ω 2000MHz
LQP02TN24NJ02p24nH ±5% 500MHz 6 500MHz 120mA 5.50Ω 2000MHz
LQP02TN27NH02p27nH ±3% 500MHz 6 500MHz 120mA 5.50Ω 2000MHz
LQP02TN27NJ02p27nH ±5% 500MHz 6 500MHz 120mA 5.50Ω 2000MHz
LQP02TN30NH02p30nH ±3% 500MHz 6 500MHz 90mA 6.50Ω 1800MHz
LQP02TN30NJ02p30nH ±5% 500MHz 6 500MHz 90mA 6.50Ω 1800MHz
LQP02TN33NH02p33nH ±3% 300MHz 4 300MHz 90mA 6.50Ω 1800MHz
LQP02TN33NJ02p33nH ±5% 300MHz 4 300MHz 90mA 6.50Ω 1800MHz
LQP02TN36NH02p36nH ±3% 300MHz 4 300MHz 90mA 7.00Ω 1600MHz
LQP02TN36NJ02p36nH ±5% 300MHz 4 300MHz 90mA 7.00Ω 1600MHz
LQP02TN39NH02p39nH ±3% 300MHz 4 300MHz 90mA 7.00Ω 1600MHz
LQP02TN39NJ02p39nH ±5% 300MHz 4 300MHz 90mA 7.00Ω 1600MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
216
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
217
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP02TQ_02 Series 01005 (0402) inch (mm)
Appearance/Dimensions
(in mm)
0.4±0.02
0.2±0.02
0.2±0.02
0.14±0.03
0.14±0.03
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 20000
Lø180mm Embossed Taping 40000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02TQ0N2B02p0.2nH ±0.1nH 500MHz - 500MHz 990mA 0.1Ω 16.6GHz
LQP02TQ0N2C02p0.2nH ±0.2nH 500MHz - 500MHz 990mA 0.1Ω 16.6GHz
LQP02TQ0N3B02p0.3nH ±0.1nH 500MHz - 500MHz 990mA 0.1Ω 16.6GHz
LQP02TQ0N3C02p0.3nH ±0.2nH 500MHz - 500MHz 990mA 0.1Ω 16.6GHz
LQP02TQ0N4B02p0.4nH ±0.1nH 500MHz 10 500MHz 990mA 0.1Ω 16.6GHz
LQP02TQ0N4C02p0.4nH ±0.2nH 500MHz 10 500MHz 990mA 0.1Ω 16.6GHz
LQP02TQ0N5B02p0.5nH ±0.1nH 500MHz 10 500MHz 730mA 0.1Ω 16.6GHz
LQP02TQ0N5C02p0.5nH ±0.2nH 500MHz 10 500MHz 730mA 0.1Ω 16.6GHz
LQP02TQ0N6B02p0.6nH ±0.1nH 500MHz 10 500MHz 730mA 0.1Ω 16.6GHz
LQP02TQ0N6C02p0.6nH ±0.2nH 500MHz 10 500MHz 730mA 0.1Ω 16.6GHz
LQP02TQ0N7B02p0.7nH ±0.1nH 500MHz 10 500MHz 630mA 0.15Ω 16.6GHz
LQP02TQ0N7C02p0.7nH ±0.2nH 500MHz 10 500MHz 630mA 0.15Ω 16.6GHz
LQP02TQ0N8B02p0.8nH ±0.1nH 500MHz 10 500MHz 630mA 0.15Ω 16.6GHz
LQP02TQ0N8C02p0.8nH ±0.2nH 500MHz 10 500MHz 630mA 0.15Ω 16.6GHz
LQP02TQ0N9B02p0.9nH ±0.1nH 500MHz 10 500MHz 580mA 0.15Ω 16.6GHz
LQP02TQ0N9C02p0.9nH ±0.2nH 500MHz 10 500MHz 580mA 0.15Ω 16.6GHz
LQP02TQ1N0B02p1.0nH ±0.1nH 500MHz 10 500MHz 580mA 0.15Ω 16.6GHz
LQP02TQ1N0C02p1.0nH ±0.2nH 500MHz 10 500MHz 580mA 0.15Ω 16.6GHz
LQP02TQ1N1B02p1.1nH ±0.1nH 500MHz 10 500MHz 570mA 0.2Ω 16.6GHz
LQP02TQ1N1C02p1.1nH ±0.2nH 500MHz 10 500MHz 570mA 0.2Ω 16.6GHz
LQP02TQ1N2B02p1.2nH ±0.1nH 500MHz 10 500MHz 550mA 0.2Ω 16.6GHz
LQP02TQ1N2C02p1.2nH ±0.2nH 500MHz 10 500MHz 550mA 0.2Ω 16.6GHz
LQP02TQ1N3B02p1.3nH ±0.1nH 500MHz 10 500MHz 400mA 0.2Ω 15.0GHz
LQP02TQ1N3C02p1.3nH ±0.2nH 500MHz 10 500MHz 400mA 0.2Ω 15.0GHz
LQP02TQ1N4B02p1.4nH ±0.1nH 500MHz 10 500MHz 400mA 0.2Ω 15.0GHz
LQP02TQ1N4C02p1.4nH ±0.2nH 500MHz 10 500MHz 400mA 0.2Ω 15.0GHz
LQP02TQ1N5B02p1.5nH ±0.1nH 500MHz 10 500MHz 400mA 0.2Ω 15.0GHz
LQP02TQ1N5C02p1.5nH ±0.2nH 500MHz 10 500MHz 400mA 0.2Ω 15.0GHz
LQP02TQ1N6B02p1.6nH ±0.1nH 500MHz 10 500MHz 390mA 0.3Ω 15.0GHz
LQP02TQ1N6C02p1.6nH ±0.2nH 500MHz 10 500MHz 390mA 0.3Ω 15.0GHz
LQP02TQ1N7B02p1.7nH ±0.1nH 500MHz 10 500MHz 380mA 0.3Ω 15.0GHz
LQP02TQ1N7C02p1.7nH ±0.2nH 500MHz 10 500MHz 380mA 0.3Ω 15.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
218
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02TQ1N8B02p1.8nH ±0.1nH 500MHz 10 500MHz 380mA 0.3Ω 15.0GHz
LQP02TQ1N8C02p1.8nH ±0.2nH 500MHz 10 500MHz 380mA 0.3Ω 15.0GHz
LQP02TQ1N9B02p1.9nH ±0.1nH 500MHz 10 500MHz 380mA 0.3Ω 13.0GHz
LQP02TQ1N9C02p1.9nH ±0.2nH 500MHz 10 500MHz 380mA 0.3Ω 13.0GHz
LQP02TQ2N0B02p2.0nH ±0.1nH 500MHz 10 500MHz 380mA 0.3Ω 13.0GHz
LQP02TQ2N0C02p2.0nH ±0.2nH 500MHz 10 500MHz 380mA 0.3Ω 13.0GHz
LQP02TQ2N1B02p2.1nH ±0.1nH 500MHz 10 500MHz 380mA 0.3Ω 13.0GHz
LQP02TQ2N1C02p2.1nH ±0.2nH 500MHz 10 500MHz 380mA 0.3Ω 13.0GHz
LQP02TQ2N2B02p2.2nH ±0.1nH 500MHz 10 500MHz 380mA 0.3Ω 13.0GHz
LQP02TQ2N2C02p2.2nH ±0.2nH 500MHz 10 500MHz 380mA 0.3Ω 13.0GHz
LQP02TQ2N3B02p2.3nH ±0.1nH 500MHz 10 500MHz 370mA 0.4Ω 13.0GHz
LQP02TQ2N3C02p2.3nH ±0.2nH 500MHz 10 500MHz 370mA 0.4Ω 13.0GHz
LQP02TQ2N4B02p2.4nH ±0.1nH 500MHz 10 500MHz 370mA 0.4Ω 13.0GHz
LQP02TQ2N4C02p2.4nH ±0.2nH 500MHz 10 500MHz 370mA 0.4Ω 13.0GHz
LQP02TQ2N5B02p2.5nH ±0.1nH 500MHz 10 500MHz 370mA 0.4Ω 11.5GHz
LQP02TQ2N5C02p2.5nH ±0.2nH 500MHz 10 500MHz 370mA 0.4Ω 11.5GHz
LQP02TQ2N6B02p2.6nH ±0.1nH 500MHz 10 500MHz 370mA 0.4Ω 11.5GHz
LQP02TQ2N6C02p2.6nH ±0.2nH 500MHz 10 500MHz 370mA 0.4Ω 11.5GHz
LQP02TQ2N7B02p2.7nH ±0.1nH 500MHz 10 500MHz 370mA 0.4Ω 11.5GHz
LQP02TQ2N7C02p2.7nH ±0.2nH 500MHz 10 500MHz 370mA 0.4Ω 11.5GHz
LQP02TQ2N8B02p2.8nH ±0.1nH 500MHz 10 500MHz 360mA 0.45Ω 10.0GHz
LQP02TQ2N8C02p2.8nH ±0.2nH 500MHz 10 500MHz 360mA 0.45Ω 10.0GHz
LQP02TQ2N9B02p2.9nH ±0.1nH 500MHz 10 500MHz 360mA 0.45Ω 10.0GHz
LQP02TQ2N9C02p2.9nH ±0.2nH 500MHz 10 500MHz 360mA 0.45Ω 10.0GHz
LQP02TQ3N0B02p3.0nH ±0.1nH 500MHz 10 500MHz 360mA 0.45Ω 10.0GHz
LQP02TQ3N0C02p3.0nH ±0.2nH 500MHz 10 500MHz 360mA 0.45Ω 10.0GHz
LQP02TQ3N1B02p3.1nH ±0.1nH 500MHz 10 500MHz 290mA 0.9Ω 10.0GHz
LQP02TQ3N1C02p3.1nH ±0.2nH 500MHz 10 500MHz 290mA 0.9Ω 10.0GHz
LQP02TQ3N2B02p3.2nH ±0.1nH 500MHz 10 500MHz 290mA 0.9Ω 10.0GHz
LQP02TQ3N2C02p3.2nH ±0.2nH 500MHz 10 500MHz 290mA 0.9Ω 10.0GHz
LQP02TQ3N3B02p3.3nH ±0.1nH 500MHz 10 500MHz 290mA 0.9Ω 10.0GHz
LQP02TQ3N3C02p3.3nH ±0.2nH 500MHz 10 500MHz 290mA 0.9Ω 10.0GHz
LQP02TQ3N4B02p3.4nH ±0.1nH 500MHz 10 500MHz 280mA 1.0Ω 9.7GHz
LQP02TQ3N4C02p3.4nH ±0.2nH 500MHz 10 500MHz 280mA 1.0Ω 9.7GHz
LQP02TQ3N5B02p3.5nH ±0.1nH 500MHz 10 500MHz 280mA 1.0Ω 9.7GHz
LQP02TQ3N5C02p3.5nH ±0.2nH 500MHz 10 500MHz 280mA 1.0Ω 9.7GHz
LQP02TQ3N6B02p3.6nH ±0.1nH 500MHz 10 500MHz 280mA 1.0Ω 9.7GHz
LQP02TQ3N6C02p3.6nH ±0.2nH 500MHz 10 500MHz 280mA 1.0Ω 9.7GHz
LQP02TQ3N7B02p3.7nH ±0.1nH 500MHz 10 500MHz 270mA 1.0Ω 9.7GHz
LQP02TQ3N7C02p3.7nH ±0.2nH 500MHz 10 500MHz 270mA 1.0Ω 9.7GHz
LQP02TQ3N8B02p3.8nH ±0.1nH 500MHz 10 500MHz 270mA 1.0Ω 9.7GHz
LQP02TQ3N8C02p3.8nH ±0.2nH 500MHz 10 500MHz 270mA 1.0Ω 9.7GHz
LQP02TQ3N9B02p3.9nH ±0.1nH 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ3N9C02p3.9nH ±0.2nH 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ4N0B02p4.0nH ±0.1nH 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ4N0C02p4.0nH ±0.2nH 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ4N1B02p4.1nH ±0.1nH 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ4N1C02p4.1nH ±0.2nH 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ4N2B02p4.2nH ±0.1nH 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ4N2C02p4.2nH ±0.2nH 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ4N3H02p4.3nH ±3% 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ4N3J02p4.3nH ±5% 500MHz 10 500MHz 270mA 1.0Ω 9.0GHz
LQP02TQ4N7H02p4.7nH ±3% 500MHz 10 500MHz 270mA 1.0Ω 8.5GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
219
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP02TQ4N7J02p4.7nH ±5% 500MHz 10 500MHz 270mA 1.0Ω 8.5GHz
LQP02TQ5N1H02p5.1nH ±3% 500MHz 10 500MHz 250mA 1.2Ω 7.8GHz
LQP02TQ5N1J02p5.1nH ±5% 500MHz 10 500MHz 250mA 1.2Ω 7.8GHz
LQP02TQ5N6H02p5.6nH ±3% 500MHz 10 500MHz 230mA 1.3Ω 7.8GHz
LQP02TQ5N6J02p5.6nH ±5% 500MHz 10 500MHz 230mA 1.3Ω 7.8GHz
LQP02TQ6N2H02p6.2nH ±3% 500MHz 10 500MHz 220mA 1.3Ω 7.2GHz
LQP02TQ6N2J02p6.2nH ±5% 500MHz 10 500MHz 220mA 1.3Ω 7.2GHz
LQP02TQ6N8H02p6.8nH ±3% 500MHz 10 500MHz 210mA 1.4Ω 6.6GHz
LQP02TQ6N8J02p6.8nH ±5% 500MHz 10 500MHz 210mA 1.4Ω 6.6GHz
LQP02TQ7N5H02p7.5nH ±3% 500MHz 10 500MHz 200mA 1.5Ω 6.6GHz
LQP02TQ7N5J02p7.5nH ±5% 500MHz 10 500MHz 200mA 1.5Ω 6.6GHz
LQP02TQ8N2H02p8.2nH ±3% 500MHz 10 500MHz 190mA 1.6Ω 6.6GHz
LQP02TQ8N2J02p8.2nH ±5% 500MHz 10 500MHz 190mA 1.6Ω 6.6GHz
LQP02TQ9N1H02p9.1nH ±3% 500MHz 10 500MHz 170mA 1.7Ω 5.9GHz
LQP02TQ9N1J02p9.1nH ±5% 500MHz 10 500MHz 170mA 1.7Ω 5.9GHz
LQP02TQ10NH02p10nH ±3% 500MHz 10 500MHz 170mA 1.7Ω 5.5GHz
LQP02TQ10NJ02p10nH ±5% 500MHz 10 500MHz 170mA 1.7Ω 5.5GHz
LQP02TQ11NH02p11nH ±3% 500MHz 10 500MHz 140mA 1.9Ω 3.5GHz
LQP02TQ11NJ02p11nH ±5% 500MHz 10 500MHz 140mA 1.9Ω 3.5GHz
LQP02TQ12NH02p12nH ±3% 500MHz 10 500MHz 140mA 2.1Ω 3.5GHz
LQP02TQ12NJ02p12nH ±5% 500MHz 10 500MHz 140mA 2.1Ω 3.5GHz
LQP02TQ13NH02p13nH ±3% 500MHz 10 500MHz 140mA 2.1Ω 3.0GHz
LQP02TQ13NJ02p13nH ±5% 500MHz 10 500MHz 140mA 2.1Ω 3.0GHz
LQP02TQ15NH02p15nH ±3% 500MHz 10 500MHz 140mA 2.3Ω 3.0GHz
LQP02TQ15NJ02p15nH ±5% 500MHz 10 500MHz 140mA 2.3Ω 3.0GHz
LQP02TQ16NH02p16nH ±3% 500MHz 10 500MHz 140mA 2.5Ω 2.5GHz
LQP02TQ16NJ02p16nH ±5% 500MHz 10 500MHz 140mA 2.5Ω 2.5GHz
LQP02TQ18NH02p18nH ±3% 500MHz 8 500MHz 140mA 2.5Ω 2.5GHz
LQP02TQ18NJ02p18nH ±5% 500MHz 8 500MHz 140mA 2.5Ω 2.5GHz
LQP02TQ20NH02p20nH ±3% 500MHz 8 500MHz 140mA 2.9Ω 2.7GHz
LQP02TQ20NJ02p20nH ±5% 500MHz 8 500MHz 140mA 2.9Ω 2.7GHz
LQP02TQ22NH02p22nH ±3% 500MHz 8 500MHz 120mA 3.2Ω 2.3GHz
LQP02TQ22NJ02p22nH ±5% 500MHz 8 500MHz 120mA 3.2Ω 2.3GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
220
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP03HQ_02 Series 0201 (0603) inch (mm)
Appearance/Dimensions
0.6±0.03
0.3±0.03
0.2±0.03
0.4±0.02
0.15±0.03 (in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 15000
Jø330mm Paper Taping 50000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03HQ0N6W02p0.6nH ±0.05nH 500MHz 20 500MHz 1100mA 0.04Ω 20000MHz
LQP03HQ0N6B02p0.6nH ±0.1nH 500MHz 20 500MHz 1100mA 0.04Ω 20000MHz
LQP03HQ0N6C02p0.6nH ±0.2nH 500MHz 20 500MHz 1100mA 0.04Ω 20000MHz
LQP03HQ0N7W02p0.7nH ±0.05nH 500MHz 20 500MHz 1100mA 0.04Ω 20000MHz
LQP03HQ0N7B02p0.7nH ±0.1nH 500MHz 20 500MHz 1100mA 0.04Ω 20000MHz
LQP03HQ0N7C02p0.7nH ±0.2nH 500MHz 20 500MHz 1100mA 0.04Ω 20000MHz
LQP03HQ0N8W02p0.8nH ±0.05nH 500MHz 20 500MHz 1100mA 0.04Ω 18000MHz
LQP03HQ0N8B02p0.8nH ±0.1nH 500MHz 20 500MHz 1100mA 0.04Ω 18000MHz
LQP03HQ0N8C02p0.8nH ±0.2nH 500MHz 20 500MHz 1100mA 0.04Ω 18000MHz
LQP03HQ0N9W02p0.9nH ±0.05nH 500MHz 20 500MHz 1100mA 0.04Ω 18000MHz
LQP03HQ0N9B02p0.9nH ±0.1nH 500MHz 20 500MHz 1100mA 0.04Ω 18000MHz
LQP03HQ0N9C02p0.9nH ±0.2nH 500MHz 20 500MHz 1100mA 0.04Ω 18000MHz
LQP03HQ1N0W02p1.0nH ±0.05nH 500MHz 20 500MHz 1100mA 0.04Ω 16000MHz
LQP03HQ1N0B02p1.0nH ±0.1nH 500MHz 20 500MHz 1100mA 0.04Ω 16000MHz
LQP03HQ1N0C02p1.0nH ±0.2nH 500MHz 20 500MHz 1100mA 0.04Ω 16000MHz
LQP03HQ1N1W02p1.1nH ±0.05nH 500MHz 20 500MHz 1100mA 0.04Ω 14000MHz
LQP03HQ1N1B02p1.1nH ±0.1nH 500MHz 20 500MHz 1100mA 0.04Ω 14000MHz
LQP03HQ1N1C02p1.1nH ±0.2nH 500MHz 20 500MHz 1100mA 0.04Ω 14000MHz
LQP03HQ1N2W02p1.2nH ±0.05nH 500MHz 20 500MHz 1100mA 0.04Ω 13000MHz
LQP03HQ1N2B02p1.2nH ±0.1nH 500MHz 20 500MHz 1100mA 0.04Ω 13000MHz
LQP03HQ1N2C02p1.2nH ±0.2nH 500MHz 20 500MHz 1100mA 0.04Ω 13000MHz
LQP03HQ1N3B02p1.3nH ±0.1nH 500MHz 20 500MHz 1100mA 0.04Ω 13000MHz
LQP03HQ1N3C02p1.3nH ±0.2nH 500MHz 20 500MHz 1100mA 0.04Ω 13000MHz
LQP03HQ1N4B02p1.4nH ±0.1nH 500MHz 20 500MHz 1100mA 0.04Ω 12000MHz
LQP03HQ1N4C02p1.4nH ±0.2nH 500MHz 20 500MHz 1100mA 0.04Ω 12000MHz
LQP03HQ1N5B02p1.5nH ±0.1nH 500MHz 20 500MHz 1000mA 0.05Ω 12000MHz
LQP03HQ1N5C02p1.5nH ±0.2nH 500MHz 20 500MHz 1000mA 0.05Ω 12000MHz
LQP03HQ1N6B02p1.6nH ±0.1nH 500MHz 20 500MHz 1000mA 0.05Ω 10000MHz
LQP03HQ1N6C02p1.6nH ±0.2nH 500MHz 20 500MHz 1000mA 0.05Ω 10000MHz
LQP03HQ1N7B02p1.7nH ±0.1nH 500MHz 20 500MHz 800mA 0.07Ω 10000MHz
LQP03HQ1N7C02p1.7nH ±0.2nH 500MHz 20 500MHz 800mA 0.07Ω 10000MHz
LQP03HQ1N8B02p1.8nH ±0.1nH 500MHz 20 500MHz 800mA 0.08Ω 10000MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
221
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03HQ1N8C02p1.8nH ±0.2nH 500MHz 20 500MHz 800mA 0.08Ω 10000MHz
LQP03HQ1N9B02p1.9nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 10000MHz
LQP03HQ1N9C02p1.9nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 10000MHz
LQP03HQ2N0B02p2.0nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N0C02p2.0nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N1B02p2.1nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N1C02p2.1nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N2B02p2.2nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N2C02p2.2nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N3B02p2.3nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N3C02p2.3nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N4B02p2.4nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N4C02p2.4nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N5B02p2.5nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N5C02p2.5nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N6B02p2.6nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N6C02p2.6nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N7B02p2.7nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N7C02p2.7nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 9000MHz
LQP03HQ2N8B02p2.8nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 8000MHz
LQP03HQ2N8C02p2.8nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 8000MHz
LQP03HQ2N9B02p2.9nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 8000MHz
LQP03HQ2N9C02p2.9nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 8000MHz
LQP03HQ3N0B02p3.0nH ±0.1nH 500MHz 20 500MHz 600mA 0.12Ω 8000MHz
LQP03HQ3N0C02p3.0nH ±0.2nH 500MHz 20 500MHz 600mA 0.12Ω 8000MHz
LQP03HQ3N1B02p3.1nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7500MHz
LQP03HQ3N1C02p3.1nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7500MHz
LQP03HQ3N2B02p3.2nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N2C02p3.2nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N3B02p3.3nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N3C02p3.3nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N4B02p3.4nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N4C02p3.4nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N5B02p3.5nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N5C02p3.5nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N6B02p3.6nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N6C02p3.6nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N7B02p3.7nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N7C02p3.7nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N8B02p3.8nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N8C02p3.8nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N9B02p3.9nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ3N9C02p3.9nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ4N0B02p4.0nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ4N0C02p4.0nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ4N1B02p4.1nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ4N1C02p4.1nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ4N2B02p4.2nH ±0.1nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ4N2C02p4.2nH ±0.2nH 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ4N3H02p4.3nH ±3% 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ4N3J02p4.3nH ±5% 500MHz 20 500MHz 500mA 0.17Ω 7000MHz
LQP03HQ4N7H02p4.7nH ±3% 500MHz 20 500MHz 400mA 0.25Ω 7000MHz
LQP03HQ4N7J02p4.7nH ±5% 500MHz 20 500MHz 400mA 0.25Ω 7000MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
222
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03HQ5N1H02p5.1nH ±3% 500MHz 20 500MHz 400mA 0.25Ω 5500MHz
LQP03HQ5N1J02p5.1nH ±5% 500MHz 20 500MHz 400mA 0.25Ω 5500MHz
LQP03HQ5N6H02p5.6nH ±3% 500MHz 20 500MHz 400mA 0.25Ω 5500MHz
LQP03HQ5N6J02p5.6nH ±5% 500MHz 20 500MHz 400mA 0.25Ω 5500MHz
LQP03HQ6N2H02p6.2nH ±3% 500MHz 20 500MHz 400mA 0.25Ω 5500MHz
LQP03HQ6N2J02p6.2nH ±5% 500MHz 20 500MHz 400mA 0.25Ω 5500MHz
LQP03HQ6N8H02p6.8nH ±3% 500MHz 20 500MHz 400mA 0.3Ω 5500MHz
LQP03HQ6N8J02p6.8nH ±5% 500MHz 20 500MHz 400mA 0.3Ω 5500MHz
LQP03HQ7N5H02p7.5nH ±3% 500MHz 20 500MHz 400mA 0.3Ω 4500MHz
LQP03HQ7N5J02p7.5nH ±5% 500MHz 20 500MHz 400mA 0.3Ω 4500MHz
LQP03HQ8N2H02p8.2nH ±3% 500MHz 20 500MHz 300mA 0.4Ω 4500MHz
LQP03HQ8N2J02p8.2nH ±5% 500MHz 20 500MHz 300mA 0.4Ω 4500MHz
LQP03HQ9N1H02p9.1nH ±3% 500MHz 20 500MHz 300mA 0.4Ω 4500MHz
LQP03HQ9N1J02p9.1nH ±5% 500MHz 20 500MHz 300mA 0.4Ω 4500MHz
LQP03HQ10NH02p10nH ±3% 500MHz 20 500MHz 300mA 0.4Ω 4500MHz
LQP03HQ10NJ02p10nH ±5% 500MHz 20 500MHz 300mA 0.4Ω 4500MHz
LQP03HQ11NH02p11nH ±3% 500MHz 20 500MHz 300mA 0.5Ω 4000MHz
LQP03HQ11NJ02p11nH ±5% 500MHz 20 500MHz 300mA 0.5Ω 4000MHz
LQP03HQ12NH02p12nH ±3% 500MHz 20 500MHz 300mA 0.5Ω 4000MHz
LQP03HQ12NJ02p12nH ±5% 500MHz 20 500MHz 300mA 0.5Ω 4000MHz
LQP03HQ13NH02p13nH ±3% 500MHz 20 500MHz 300mA 0.5Ω 4000MHz
LQP03HQ13NJ02p13nH ±5% 500MHz 20 500MHz 300mA 0.5Ω 4000MHz
LQP03HQ15NH02p15nH ±3% 500MHz 20 500MHz 300mA 0.7Ω 3500MHz
LQP03HQ15NJ02p15nH ±5% 500MHz 20 500MHz 300mA 0.7Ω 3500MHz
LQP03HQ16NH02p16nH ±3% 500MHz 20 500MHz 250mA 0.8Ω 3500MHz
LQP03HQ16NJ02p16nH ±5% 500MHz 20 500MHz 250mA 0.8Ω 3500MHz
LQP03HQ18NH02p18nH ±3% 500MHz 20 500MHz 250mA 0.8Ω 3500MHz
LQP03HQ18NJ02p18nH ±5% 500MHz 20 500MHz 250mA 0.8Ω 3500MHz
LQP03HQ20NH02p20nH ±3% 500MHz 20 500MHz 250mA 0.8Ω 3000MHz
LQP03HQ20NJ02p20nH ±5% 500MHz 20 500MHz 250mA 0.8Ω 3000MHz
LQP03HQ22NH02p22nH ±3% 500MHz 20 500MHz 250mA 0.82Ω 3000MHz
LQP03HQ22NJ02p22nH ±5% 500MHz 20 500MHz 250mA 0.82Ω 3000MHz
LQP03HQ24NH02p24nH ±3% 500MHz 15 500MHz 170mA 1.6Ω 2000MHz
LQP03HQ24NJ02p24nH ±5% 500MHz 15 500MHz 170mA 1.6Ω 2000MHz
LQP03HQ27NH02p27nH ±3% 500MHz 15 500MHz 170mA 1.6Ω 2000MHz
LQP03HQ27NJ02p27nH ±5% 500MHz 15 500MHz 170mA 1.6Ω 2000MHz
LQP03HQ30NH02p30nH ±3% 500MHz 12 500MHz 150mA 2.0Ω 1700MHz
LQP03HQ30NJ02p30nH ±5% 500MHz 12 500MHz 150mA 2.0Ω 1700MHz
LQP03HQ33NH02p33nH ±3% 300MHz 12 300MHz 150mA 2.0Ω 1700MHz
LQP03HQ33NJ02p33nH ±5% 300MHz 12 300MHz 150mA 2.0Ω 1700MHz
LQP03HQ36NH02p36nH ±3% 300MHz 12 300MHz 150mA 2.0Ω 1500MHz
LQP03HQ36NJ02p36nH ±5% 300MHz 12 300MHz 150mA 2.0Ω 1500MHz
LQP03HQ39NH02p39nH ±3% 300MHz 12 300MHz 150mA 2.0Ω 1500MHz
LQP03HQ39NJ02p39nH ±5% 300MHz 12 300MHz 150mA 2.0Ω 1500MHz
LQP03HQ43NH02p43nH ±3% 300MHz 12 300MHz 130mA 2.5Ω 1300MHz
LQP03HQ43NJ02p43nH ±5% 300MHz 12 300MHz 130mA 2.5Ω 1300MHz
LQP03HQ47NH02p47nH ±3% 300MHz 12 300MHz 130mA 2.5Ω 1300MHz
LQP03HQ47NJ02p47nH ±5% 300MHz 12 300MHz 130mA 2.5Ω 1300MHz
LQP03HQ51NH02p51nH ±3% 300MHz 12 300MHz 130mA 2.5Ω 1200MHz
LQP03HQ51NJ02p51nH ±5% 300MHz 12 300MHz 130mA 2.5Ω 1200MHz
LQP03HQ56NH02p56nH ±3% 300MHz 12 300MHz 130mA 2.5Ω 1200MHz
LQP03HQ56NJ02p56nH ±5% 300MHz 12 300MHz 130mA 2.5Ω 1200MHz
LQP03HQ62NH02p62nH ±3% 300MHz 12 300MHz 100mA 5.0Ω 1100MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
223
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03HQ62NJ02p62nH ±5% 300MHz 12 300MHz 100mA 5.0Ω 1100MHz
LQP03HQ68NH02p68nH ±3% 300MHz 12 300MHz 100mA 5.0Ω 1100MHz
LQP03HQ68NJ02p68nH ±5% 300MHz 12 300MHz 100mA 5.0Ω 1100MHz
LQP03HQ75NH02p75nH ±3% 300MHz 10 300MHz 100mA 5.0Ω 1100MHz
LQP03HQ75NJ02p75nH ±5% 300MHz 10 300MHz 100mA 5.0Ω 1100MHz
LQP03HQ82NH02p82nH ±3% 300MHz 10 300MHz 100mA 5.0Ω 1000MHz
LQP03HQ82NJ02p82nH ±5% 300MHz 10 300MHz 100mA 5.0Ω 1000MHz
LQP03HQ91NH02p91nH ±3% 300MHz 10 300MHz 80mA 7.0Ω 1000MHz
LQP03HQ91NJ02p91nH ±5% 300MHz 10 300MHz 80mA 7.0Ω 1000MHz
LQP03HQR10H02p100nH ±3% 300MHz 10 300MHz 80mA 7.0Ω 900MHz
LQP03HQR10J02p100nH ±5% 300MHz 10 300MHz 80mA 7.0Ω 900MHz
LQP03HQR11H02p110nH ±3% 300MHz 10 300MHz 80mA 8.0Ω 900MHz
LQP03HQR11J02p110nH ±5% 300MHz 10 300MHz 80mA 8.0Ω 900MHz
LQP03HQR12H02p120nH ±3% 300MHz 10 300MHz 80mA 8.0Ω 800MHz
LQP03HQR12J02p120nH ±5% 300MHz 10 300MHz 80mA 8.0Ω 800MHz
LQP03HQR13H02p130nH ±3% 100MHz 7 100MHz 80mA 8.0Ω 700MHz
LQP03HQR13J02p130nH ±5% 100MHz 7 100MHz 80mA 8.0Ω 700MHz
LQP03HQR15H02p150nH ±3% 100MHz 7 100MHz 80mA 8.0Ω 700MHz
LQP03HQR15J02p150nH ±5% 100MHz 7 100MHz 80mA 8.0Ω 700MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
224
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP03PN_02 Series 0201 (0603) inch (mm)
Appearance/Dimensions
0.3±0.030.3±0.03
0.6±0.03
0.15±0.05
(in mm)
Polarity Marking
Colored Side
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 15000
Jø330mm Paper Taping 50000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03PN2N2C02p2.2nH ±0.2nH 500MHz 10 500MHz 1400mA(Ambient temp.85°C)
1000mA(Ambient temp.125°C) 0.055Ω 9000MHz
LQP03PN2N7C02p2.7nH ±0.2nH 500MHz 10 500MHz 1300mA(Ambient temp.85°C)
900mA(Ambient temp.125°C) 0.065Ω 6600MHz
LQP03PN3N3C02p3.3nH ±0.2nH 500MHz 10 500MHz 1200mA(Ambient temp.85°C)
800mA(Ambient temp.125°C) 0.080Ω 5500MHz
LQP03PN3N9C02p3.9nH ±0.2nH 500MHz 10 500MHz 1000mA(Ambient temp.85°C)
700mA(Ambient temp.125°C) 0.100Ω 4900MHz
LQP03PN4N7J02p4.7nH ±5% 500MHz 10 500MHz 900mA(Ambient temp.85°C)
600mA(Ambient temp.125°C) 0.140Ω 4400MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQP03PN_02 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
225
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQP03PN_02 series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
Rated Current (mA)
1400
1300
1200
1000
900
800
700
600
2.2nH
2.7nH
3.3nH
3.9nH
4.7nH
Operating Temperature (Ambient Temperature) (°C)
125850
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
226
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP03TG_02 Series 0201 (0603) inch (mm)
Appearance/Dimensions
0.6±0.03
0.3±0.03
0.3±0.03
0.15±0.05 0.15±0.05
(in mm)
Polarity Marking
0.1 to 0.5nH 0.6 to 120nH
Colored Side
Polarity Marking
Colored Side
0.6±0.03
0.3±0.03
0.3±0.03
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 15000
Jø330mm Paper Taping 50000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TG0N1B02p0.1nH ±0.1nH 500MHz - 500MHz 850mA 0.07Ω 20000MHz
LQP03TG0N2B02p0.2nH ±0.1nH 500MHz - 500MHz 850mA 0.08Ω 20000MHz
LQP03TG0N2C02p0.2nH ±0.2nH 500MHz - 500MHz 850mA 0.08Ω 20000MHz
LQP03TG0N3B02p0.3nH ±0.1nH 500MHz - 500MHz 850mA 0.08Ω 18000MHz
LQP03TG0N3C02p0.3nH ±0.2nH 500MHz - 500MHz 850mA 0.08Ω 18000MHz
LQP03TG0N4B02p0.4nH ±0.1nH 500MHz - 500MHz 850mA 0.08Ω 18000MHz
LQP03TG0N4C02p0.4nH ±0.2nH 500MHz - 500MHz 850mA 0.08Ω 18000MHz
LQP03TG0N5B02p0.5nH ±0.1nH 500MHz 11 500MHz 850mA 0.08Ω 18000MHz
LQP03TG0N5C02p0.5nH ±0.2nH 500MHz 11 500MHz 850mA 0.08Ω 18000MHz
LQP03TG0N6B02p0.6nH ±0.1nH 500MHz 11 500MHz 850mA 0.08Ω 18000MHz
LQP03TG0N6C02p0.6nH ±0.2nH 500MHz 11 500MHz 850mA 0.08Ω 18000MHz
LQP03TG0N7B02p0.7nH ±0.1nH 500MHz 12 500MHz 750mA 0.10Ω 18000MHz
LQP03TG0N7C02p0.7nH ±0.2nH 500MHz 12 500MHz 750mA 0.10Ω 18000MHz
LQP03TG0N8B02p0.8nH ±0.1nH 500MHz 12 500MHz 750mA 0.10Ω 18000MHz
LQP03TG0N8C02p0.8nH ±0.2nH 500MHz 12 500MHz 750mA 0.10Ω 18000MHz
LQP03TG0N9B02p0.9nH ±0.1nH 500MHz 12 500MHz 700mA 0.12Ω 18000MHz
LQP03TG0N9C02p0.9nH ±0.2nH 500MHz 12 500MHz 700mA 0.12Ω 18000MHz
LQP03TG1N0B02p1.0nH ±0.1nH 500MHz 12 500MHz 600mA 0.15Ω 17000MHz
LQP03TG1N0C02p1.0nH ±0.2nH 500MHz 12 500MHz 600mA 0.15Ω 17000MHz
LQP03TG1N1B02p1.1nH ±0.1nH 500MHz 12 500MHz 600mA 0.15Ω 17000MHz
LQP03TG1N1C02p1.1nH ±0.2nH 500MHz 12 500MHz 600mA 0.15Ω 17000MHz
LQP03TG1N2B02p1.2nH ±0.1nH 500MHz 13 500MHz 600mA 0.15Ω 15000MHz
LQP03TG1N2C02p1.2nH ±0.2nH 500MHz 13 500MHz 600mA 0.15Ω 15000MHz
LQP03TG1N3B02p1.3nH ±0.1nH 500MHz 13 500MHz 600mA 0.15Ω 15000MHz
LQP03TG1N3C02p1.3nH ±0.2nH 500MHz 13 500MHz 600mA 0.15Ω 15000MHz
LQP03TG1N4B02p1.4nH ±0.1nH 500MHz 13 500MHz 600mA 0.15Ω 14000MHz
LQP03TG1N4C02p1.4nH ±0.2nH 500MHz 13 500MHz 600mA 0.15Ω 14000MHz
LQP03TG1N5B02p1.5nH ±0.1nH 500MHz 13 500MHz 600mA 0.15Ω 13500MHz
LQP03TG1N5C02p1.5nH ±0.2nH 500MHz 13 500MHz 600mA 0.15Ω 13500MHz
LQP03TG1N6B02p1.6nH ±0.1nH 500MHz 13 500MHz 600mA 0.15Ω 13000MHz
LQP03TG1N6C02p1.6nH ±0.2nH 500MHz 13 500MHz 600mA 0.15Ω 13000MHz
LQP03TG1N7B02p1.7nH ±0.1nH 500MHz 13 500MHz 500mA 0.20Ω 12500MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
227
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TG1N7C02p1.7nH ±0.2nH 500MHz 13 500MHz 500mA 0.20Ω 12500MHz
LQP03TG1N8B02p1.8nH ±0.1nH 500MHz 13 500MHz 500mA 0.20Ω 12500MHz
LQP03TG1N8C02p1.8nH ±0.2nH 500MHz 13 500MHz 500mA 0.20Ω 12500MHz
LQP03TG1N9B02p1.9nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 12500MHz
LQP03TG1N9C02p1.9nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 12500MHz
LQP03TG2N0B02p2.0nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 12500MHz
LQP03TG2N0C02p2.0nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 12500MHz
LQP03TG2N1B02p2.1nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 12000MHz
LQP03TG2N1C02p2.1nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 12000MHz
LQP03TG2N2B02p2.2nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 12000MHz
LQP03TG2N2C02p2.2nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 12000MHz
LQP03TG2N3B02p2.3nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 11500MHz
LQP03TG2N3C02p2.3nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 11500MHz
LQP03TG2N4B02p2.4nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 11000MHz
LQP03TG2N4C02p2.4nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 11000MHz
LQP03TG2N5B02p2.5nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 11000MHz
LQP03TG2N5C02p2.5nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 11000MHz
LQP03TG2N6B02p2.6nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 11000MHz
LQP03TG2N6C02p2.6nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 11000MHz
LQP03TG2N7B02p2.7nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 11000MHz
LQP03TG2N7C02p2.7nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 11000MHz
LQP03TG2N8B02p2.8nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 9500MHz
LQP03TG2N8C02p2.8nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 9500MHz
LQP03TG2N9B02p2.9nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 9500MHz
LQP03TG2N9C02p2.9nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 9500MHz
LQP03TG3N0B02p3.0nH ±0.1nH 500MHz 13 500MHz 450mA 0.25Ω 9500MHz
LQP03TG3N0C02p3.0nH ±0.2nH 500MHz 13 500MHz 450mA 0.25Ω 9500MHz
LQP03TG3N1B02p3.1nH ±0.1nH 500MHz 13 500MHz 400mA 0.32Ω 9500MHz
LQP03TG3N1C02p3.1nH ±0.2nH 500MHz 13 500MHz 400mA 0.32Ω 9500MHz
LQP03TG3N2B02p3.2nH ±0.1nH 500MHz 13 500MHz 400mA 0.32Ω 9500MHz
LQP03TG3N2C02p3.2nH ±0.2nH 500MHz 13 500MHz 400mA 0.32Ω 9500MHz
LQP03TG3N3B02p3.3nH ±0.1nH 500MHz 13 500MHz 400mA 0.32Ω 9500MHz
LQP03TG3N3C02p3.3nH ±0.2nH 500MHz 13 500MHz 400mA 0.32Ω 9500MHz
LQP03TG3N4B02p3.4nH ±0.1nH 500MHz 13 500MHz 350mA 0.35Ω 8000MHz
LQP03TG3N4C02p3.4nH ±0.2nH 500MHz 13 500MHz 350mA 0.35Ω 8000MHz
LQP03TG3N5B02p3.5nH ±0.1nH 500MHz 13 500MHz 350mA 0.35Ω 8000MHz
LQP03TG3N5C02p3.5nH ±0.2nH 500MHz 13 500MHz 350mA 0.35Ω 8000MHz
LQP03TG3N6B02p3.6nH ±0.1nH 500MHz 13 500MHz 350mA 0.35Ω 8000MHz
LQP03TG3N6C02p3.6nH ±0.2nH 500MHz 13 500MHz 350mA 0.35Ω 8000MHz
LQP03TG3N7B02p3.7nH ±0.1nH 500MHz 13 500MHz 350mA 0.35Ω 7000MHz
LQP03TG3N7C02p3.7nH ±0.2nH 500MHz 13 500MHz 350mA 0.35Ω 7000MHz
LQP03TG3N8B02p3.8nH ±0.1nH 500MHz 13 500MHz 350mA 0.35Ω 7000MHz
LQP03TG3N8C02p3.8nH ±0.2nH 500MHz 13 500MHz 350mA 0.35Ω 7000MHz
LQP03TG3N9B02p3.9nH ±0.1nH 500MHz 13 500MHz 350mA 0.35Ω 6500MHz
LQP03TG3N9C02p3.9nH ±0.2nH 500MHz 13 500MHz 350mA 0.35Ω 6500MHz
LQP03TG4N3H02p4.3nH ±3% 500MHz 13 500MHz 300mA 0.58Ω 6500MHz
LQP03TG4N3J02p4.3nH ±5% 500MHz 13 500MHz 300mA 0.58Ω 6500MHz
LQP03TG4N7H02p4.7nH ±3% 500MHz 12 500MHz 250mA 0.72Ω 6500MHz
LQP03TG4N7J02p4.7nH ±5% 500MHz 12 500MHz 250mA 0.72Ω 6500MHz
LQP03TG5N1H02p5.1nH ±3% 500MHz 12 500MHz 250mA 0.72Ω 6500MHz
LQP03TG5N1J02p5.1nH ±5% 500MHz 12 500MHz 250mA 0.72Ω 6500MHz
LQP03TG5N6H02p5.6nH ±3% 500MHz 12 500MHz 250mA 0.88Ω 6000MHz
LQP03TG5N6J02p5.6nH ±5% 500MHz 12 500MHz 250mA 0.88Ω 6000MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
228
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TG6N2H02p6.2nH ±3% 500MHz 12 500MHz 200mA 1.15Ω 6000MHz
LQP03TG6N2J02p6.2nH ±5% 500MHz 12 500MHz 200mA 1.15Ω 6000MHz
LQP03TG6N8H02p6.8nH ±3% 500MHz 12 500MHz 200mA 1.15Ω 5400MHz
LQP03TG6N8J02p6.8nH ±5% 500MHz 12 500MHz 200mA 1.15Ω 5400MHz
LQP03TG7N5H02p7.5nH ±3% 500MHz 12 500MHz 200mA 1.22Ω 4800MHz
LQP03TG7N5J02p7.5nH ±5% 500MHz 12 500MHz 200mA 1.22Ω 4800MHz
LQP03TG8N2H02p8.2nH ±3% 500MHz 12 500MHz 200mA 1.40Ω 4800MHz
LQP03TG8N2J02p8.2nH ±5% 500MHz 12 500MHz 200mA 1.40Ω 4800MHz
LQP03TG9N1H02p9.1nH ±3% 500MHz 11 500MHz 200mA 1.40Ω 4500MHz
LQP03TG9N1J02p9.1nH ±5% 500MHz 11 500MHz 200mA 1.40Ω 4500MHz
LQP03TG10NH02p10nH ±3% 500MHz 11 500MHz 190mA 1.52Ω 4500MHz
LQP03TG10NJ02p10nH ±5% 500MHz 11 500MHz 190mA 1.52Ω 4500MHz
LQP03TG11NH02p11nH ±3% 500MHz 11 500MHz 180mA 1.65Ω 4100MHz
LQP03TG11NJ02p11nH ±5% 500MHz 11 500MHz 180mA 1.65Ω 4100MHz
LQP03TG12NH02p12nH ±3% 500MHz 11 500MHz 180mA 1.78Ω 3700MHz
LQP03TG12NJ02p12nH ±5% 500MHz 11 500MHz 180mA 1.78Ω 3700MHz
LQP03TG13NH02p13nH ±3% 500MHz 11 500MHz 170mA 1.82Ω 3400MHz
LQP03TG13NJ02p13nH ±5% 500MHz 11 500MHz 170mA 1.82Ω 3400MHz
LQP03TG15NH02p15nH ±3% 500MHz 11 500MHz 170mA 1.90Ω 3100MHz
LQP03TG15NJ02p15nH ±5% 500MHz 11 500MHz 170mA 1.90Ω 3100MHz
LQP03TG16NH02p16nH ±3% 500MHz 11 500MHz 160mA 2.03Ω 2900MHz
LQP03TG16NJ02p16nH ±5% 500MHz 11 500MHz 160mA 2.03Ω 2900MHz
LQP03TG18NH02p18nH ±3% 500MHz 11 500MHz 160mA 2.28Ω 2800MHz
LQP03TG18NJ02p18nH ±5% 500MHz 11 500MHz 160mA 2.28Ω 2800MHz
LQP03TG20NH02p20nH ±3% 500MHz 9 500MHz 140mA 2.57Ω 2600MHz
LQP03TG20NJ02p20nH ±5% 500MHz 9 500MHz 140mA 2.57Ω 2600MHz
LQP03TG22NH02p22nH ±3% 500MHz 9 500MHz 140mA 2.85Ω 2500MHz
LQP03TG22NJ02p22nH ±5% 500MHz 9 500MHz 140mA 2.85Ω 2500MHz
LQP03TG24NH02p24nH ±3% 500MHz 7 500MHz 120mA 3.17Ω 2000MHz
LQP03TG24NJ02p24nH ±5% 500MHz 7 500MHz 120mA 3.17Ω 2000MHz
LQP03TG27NH02p27nH ±3% 500MHz 7 500MHz 120mA 3.65Ω 1700MHz
LQP03TG27NJ02p27nH ±5% 500MHz 7 500MHz 120mA 3.65Ω 1700MHz
LQP03TG33NJ02p33nH ±5% 300MHz 7 300MHz 110mA 4.25Ω 1600MHz
LQP03TG39NJ02p39nH ±5% 300MHz 7 300MHz 110mA 4.6Ω 1500MHz
LQP03TG47NJ02p47nH ±5% 300MHz 7 300MHz 100mA 5.2Ω 1300MHz
LQP03TG56NJ02p56nH ±5% 300MHz 7 300MHz 100mA 5.6Ω 1200MHz
LQP03TG68NJ02p68nH ±5% 300MHz 6 300MHz 90mA 6.25Ω 1100MHz
LQP03TG82NJ02p82nH ±5% 300MHz 6 300MHz 90mA 7.15Ω 1000MHz
LQP03TGR10J02p100nH ±5% 300MHz 6 300MHz 80mA 8.05Ω 900MHz
LQP03TGR12J02p120nH ±5% 300MHz 6 300MHz 80mA 8.75Ω 800MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
229
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
230
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP03TN_02 Series 0201 (0603) inch (mm)
Appearance/Dimensions
0.6±0.03
0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
Polarity Marking
0.6 to 62nH 68 to 270nH
Colored Side
Polarity Marking
Colored Side
0.6±0.03
0.3±0.03
0.3±0.03
0.15±0.05
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 15000
Jø330mm Paper Taping 50000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TN0N6B02p0.6nH ±0.1nH 500MHz 14 500MHz 850mA 0.07Ω 20000MHz
LQP03TN0N6C02p0.6nH ±0.2nH 500MHz 14 500MHz 850mA 0.07Ω 20000MHz
LQP03TN0N7B02p0.7nH ±0.1nH 500MHz 14 500MHz 800mA 0.08Ω 20000MHz
LQP03TN0N7C02p0.7nH ±0.2nH 500MHz 14 500MHz 800mA 0.08Ω 20000MHz
LQP03TN0N8B02p0.8nH ±0.1nH 500MHz 14 500MHz 800mA 0.08Ω 18000MHz
LQP03TN0N8C02p0.8nH ±0.2nH 500MHz 14 500MHz 800mA 0.08Ω 18000MHz
LQP03TN0N9B02p0.9nH ±0.1nH 500MHz 14 500MHz 750mA 0.10Ω 18000MHz
LQP03TN0N9C02p0.9nH ±0.2nH 500MHz 14 500MHz 750mA 0.10Ω 18000MHz
LQP03TN1N0B02p1.0nH ±0.1nH 500MHz 14 500MHz 750mA 0.10Ω 17000MHz
LQP03TN1N0C02p1.0nH ±0.2nH 500MHz 14 500MHz 750mA 0.10Ω 17000MHz
LQP03TN1N1B02p1.1nH ±0.1nH 500MHz 14 500MHz 750mA 0.10Ω 17000MHz
LQP03TN1N1C02p1.1nH ±0.2nH 500MHz 14 500MHz 750mA 0.10Ω 17000MHz
LQP03TN1N2B02p1.2nH ±0.1nH 500MHz 14 500MHz 750mA 0.10Ω 17000MHz
LQP03TN1N2C02p1.2nH ±0.2nH 500MHz 14 500MHz 750mA 0.10Ω 17000MHz
LQP03TN1N3B02p1.3nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 17000MHz
LQP03TN1N3C02p1.3nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 17000MHz
LQP03TN1N4B02p1.4nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 16000MHz
LQP03TN1N4C02p1.4nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 16000MHz
LQP03TN1N5B02p1.5nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 15000MHz
LQP03TN1N5C02p1.5nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 15000MHz
LQP03TN1N6B02p1.6nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 15000MHz
LQP03TN1N6C02p1.6nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 15000MHz
LQP03TN1N7B02p1.7nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 15000MHz
LQP03TN1N7C02p1.7nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 15000MHz
LQP03TN1N8B02p1.8nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 15000MHz
LQP03TN1N8C02p1.8nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 15000MHz
LQP03TN1N9B02p1.9nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 12500MHz
LQP03TN1N9C02p1.9nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 12500MHz
LQP03TN2N0B02p2.0nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 12500MHz
LQP03TN2N0C02p2.0nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 12500MHz
LQP03TN2N1B02p2.1nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 11000MHz
LQP03TN2N1C02p2.1nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 11000MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
231
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TN2N2B02p2.2nH ±0.1nH 500MHz 14 500MHz 600mA 0.15Ω 11000MHz
LQP03TN2N2C02p2.2nH ±0.2nH 500MHz 14 500MHz 600mA 0.15Ω 11000MHz
LQP03TN2N3B02p2.3nH ±0.1nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N3C02p2.3nH ±0.2nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N4B02p2.4nH ±0.1nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N4C02p2.4nH ±0.2nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N5B02p2.5nH ±0.1nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N5C02p2.5nH ±0.2nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N6B02p2.6nH ±0.1nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N6C02p2.6nH ±0.2nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N7B02p2.7nH ±0.1nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N7C02p2.7nH ±0.2nH 500MHz 14 500MHz 500mA 0.20Ω 10000MHz
LQP03TN2N8B02p2.8nH ±0.1nH 500MHz 14 500MHz 500mA 0.20Ω 9500MHz
LQP03TN2N8C02p2.8nH ±0.2nH 500MHz 14 500MHz 500mA 0.20Ω 9500MHz
LQP03TN2N9B02p2.9nH ±0.1nH 500MHz 14 500MHz 500mA 0.20Ω 9500MHz
LQP03TN2N9C02p2.9nH ±0.2nH 500MHz 14 500MHz 500mA 0.20Ω 9500MHz
LQP03TN3N0B02p3.0nH ±0.1nH 500MHz 14 500MHz 450mA 0.25Ω 9500MHz
LQP03TN3N0C02p3.0nH ±0.2nH 500MHz 14 500MHz 450mA 0.25Ω 9500MHz
LQP03TN3N1B02p3.1nH ±0.1nH 500MHz 14 500MHz 450mA 0.25Ω 8000MHz
LQP03TN3N1C02p3.1nH ±0.2nH 500MHz 14 500MHz 450mA 0.25Ω 8000MHz
LQP03TN3N2B02p3.2nH ±0.1nH 500MHz 14 500MHz 450mA 0.25Ω 8000MHz
LQP03TN3N2C02p3.2nH ±0.2nH 500MHz 14 500MHz 450mA 0.25Ω 8000MHz
LQP03TN3N3B02p3.3nH ±0.1nH 500MHz 14 500MHz 450mA 0.25Ω 8000MHz
LQP03TN3N3C02p3.3nH ±0.2nH 500MHz 14 500MHz 450mA 0.25Ω 8000MHz
LQP03TN3N4B02p3.4nH ±0.1nH 500MHz 14 500MHz 450mA 0.25Ω 7000MHz
LQP03TN3N4C02p3.4nH ±0.2nH 500MHz 14 500MHz 450mA 0.25Ω 7000MHz
LQP03TN3N5B02p3.5nH ±0.1nH 500MHz 14 500MHz 450mA 0.25Ω 7000MHz
LQP03TN3N5C02p3.5nH ±0.2nH 500MHz 14 500MHz 450mA 0.25Ω 7000MHz
LQP03TN3N6B02p3.6nH ±0.1nH 500MHz 14 500MHz 400mA 0.30Ω 6000MHz
LQP03TN3N6C02p3.6nH ±0.2nH 500MHz 14 500MHz 400mA 0.30Ω 6000MHz
LQP03TN3N7B02p3.7nH ±0.1nH 500MHz 14 500MHz 400mA 0.30Ω 6000MHz
LQP03TN3N7C02p3.7nH ±0.2nH 500MHz 14 500MHz 400mA 0.30Ω 6000MHz
LQP03TN3N8B02p3.8nH ±0.1nH 500MHz 14 500MHz 400mA 0.30Ω 6000MHz
LQP03TN3N8C02p3.8nH ±0.2nH 500MHz 14 500MHz 400mA 0.30Ω 6000MHz
LQP03TN3N9B02p3.9nH ±0.1nH 500MHz 14 500MHz 400mA 0.30Ω 5700MHz
LQP03TN3N9C02p3.9nH ±0.2nH 500MHz 14 500MHz 400mA 0.30Ω 5700MHz
LQP03TN4N0B02p4.0nH ±0.1nH 500MHz 14 500MHz 350mA 0.40Ω 5300MHz
LQP03TN4N0C02p4.0nH ±0.2nH 500MHz 14 500MHz 350mA 0.40Ω 5300MHz
LQP03TN4N1B02p4.1nH ±0.1nH 500MHz 14 500MHz 350mA 0.40Ω 5300MHz
LQP03TN4N1C02p4.1nH ±0.2nH 500MHz 14 500MHz 350mA 0.40Ω 5300MHz
LQP03TN4N2B02p4.2nH ±0.1nH 500MHz 14 500MHz 350mA 0.40Ω 5300MHz
LQP03TN4N2C02p4.2nH ±0.2nH 500MHz 14 500MHz 350mA 0.40Ω 5300MHz
LQP03TN4N3H02p4.3nH ±3% 500MHz 14 500MHz 350mA 0.40Ω 5300MHz
LQP03TN4N3J02p4.3nH ±5% 500MHz 14 500MHz 350mA 0.40Ω 5300MHz
LQP03TN4N7H02p4.7nH ±3% 500MHz 14 500MHz 350mA 0.40Ω 4400MHz
LQP03TN4N7J02p4.7nH ±5% 500MHz 14 500MHz 350mA 0.40Ω 4400MHz
LQP03TN5N1H02p5.1nH ±3% 500MHz 14 500MHz 350mA 0.40Ω 4200MHz
LQP03TN5N1J02p5.1nH ±5% 500MHz 14 500MHz 350mA 0.40Ω 4200MHz
LQP03TN5N6H02p5.6nH ±3% 500MHz 14 500MHz 350mA 0.40Ω 4000MHz
LQP03TN5N6J02p5.6nH ±5% 500MHz 14 500MHz 350mA 0.40Ω 4000MHz
LQP03TN6N2H02p6.2nH ±3% 500MHz 14 500MHz 300mA 0.60Ω 4000MHz
LQP03TN6N2J02p6.2nH ±5% 500MHz 14 500MHz 300mA 0.60Ω 4000MHz
LQP03TN6N8H02p6.8nH ±3% 500MHz 14 500MHz 300mA 0.60Ω 3900MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
232
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TN6N8J02p6.8nH ±5% 500MHz 14 500MHz 300mA 0.60Ω 3900MHz
LQP03TN7N5H02p7.5nH ±3% 500MHz 14 500MHz 300mA 0.60Ω 3700MHz
LQP03TN7N5J02p7.5nH ±5% 500MHz 14 500MHz 300mA 0.60Ω 3700MHz
LQP03TN8N2H02p8.2nH ±3% 500MHz 14 500MHz 250mA 0.70Ω 3600MHz
LQP03TN8N2J02p8.2nH ±5% 500MHz 14 500MHz 250mA 0.70Ω 3600MHz
LQP03TN9N1H02p9.1nH ±3% 500MHz 14 500MHz 250mA 0.70Ω 3300MHz
LQP03TN9N1J02p9.1nH ±5% 500MHz 14 500MHz 250mA 0.70Ω 3300MHz
LQP03TN10NH02p10nH ±3% 500MHz 14 500MHz 250mA 0.70Ω 3200MHz
LQP03TN10NJ02p10nH ±5% 500MHz 14 500MHz 250mA 0.70Ω 3200MHz
LQP03TN11NH02p11nH ±3% 500MHz 14 500MHz 250mA 0.80Ω 2900MHz
LQP03TN11NJ02p11nH ±5% 500MHz 14 500MHz 250mA 0.80Ω 2900MHz
LQP03TN12NH02p12nH ±3% 500MHz 12 500MHz 250mA 0.70Ω 2900MHz
LQP03TN12NJ02p12nH ±5% 500MHz 12 500MHz 250mA 0.70Ω 2900MHz
LQP03TN13NH02p13nH ±3% 500MHz 12 500MHz 250mA 0.80Ω 2600MHz
LQP03TN13NJ02p13nH ±5% 500MHz 12 500MHz 250mA 0.80Ω 2600MHz
LQP03TN15NH02p15nH ±3% 500MHz 12 500MHz 250mA 0.70Ω 2600MHz
LQP03TN15NJ02p15nH ±5% 500MHz 12 500MHz 250mA 0.70Ω 2600MHz
LQP03TN16NH02p16nH ±3% 500MHz 12 500MHz 200mA 0.95Ω 2200MHz
LQP03TN16NJ02p16nH ±5% 500MHz 12 500MHz 200mA 0.95Ω 2200MHz
LQP03TN18NH02p18nH ±3% 500MHz 12 500MHz 200mA 0.80Ω 2200MHz
LQP03TN18NJ02p18nH ±5% 500MHz 12 500MHz 200mA 0.80Ω 2200MHz
LQP03TN20NH02p20nH ±3% 500MHz 12 500MHz 150mA 2.30Ω 2200MHz
LQP03TN20NJ02p20nH ±5% 500MHz 12 500MHz 150mA 2.30Ω 2200MHz
LQP03TN22NH02p22nH ±3% 500MHz 12 500MHz 150mA 1.90Ω 2200MHz
LQP03TN22NJ02p22nH ±5% 500MHz 12 500MHz 150mA 1.90Ω 2200MHz
LQP03TN24NH02p24nH ±3% 500MHz 12 500MHz 140mA 2.30Ω 2000MHz
LQP03TN24NJ02p24nH ±5% 500MHz 12 500MHz 140mA 2.30Ω 2000MHz
LQP03TN27NH02p27nH ±3% 500MHz 12 500MHz 140mA 2.30Ω 2000MHz
LQP03TN27NJ02p27nH ±5% 500MHz 12 500MHz 140mA 2.30Ω 2000MHz
LQP03TN30NH02p30nH ±3% 500MHz 9 500MHz 120mA 2.95Ω 1700MHz
LQP03TN30NJ02p30nH ±5% 500MHz 9 500MHz 120mA 2.95Ω 1700MHz
LQP03TN33NH02p33nH ±3% 300MHz 9 300MHz 120mA 2.95Ω 1700MHz
LQP03TN33NJ02p33nH ±5% 300MHz 9 300MHz 120mA 2.95Ω 1700MHz
LQP03TN36NH02p36nH ±3% 300MHz 9 300MHz 120mA 3.00Ω 1500MHz
LQP03TN36NJ02p36nH ±5% 300MHz 9 300MHz 120mA 3.00Ω 1500MHz
LQP03TN39NH02p39nH ±3% 300MHz 9 300MHz 120mA 3.00Ω 1500MHz
LQP03TN39NJ02p39nH ±5% 300MHz 9 300MHz 120mA 3.00Ω 1500MHz
LQP03TN43NH02p43nH ±3% 300MHz 9 300MHz 100mA 3.60Ω 1300MHz
LQP03TN43NJ02p43nH ±5% 300MHz 9 300MHz 100mA 3.60Ω 1300MHz
LQP03TN47NH02p47nH ±3% 300MHz 9 300MHz 100mA 3.60Ω 1300MHz
LQP03TN47NJ02p47nH ±5% 300MHz 9 300MHz 100mA 3.60Ω 1300MHz
LQP03TN51NH02p51nH ±3% 300MHz 9 300MHz 100mA 3.90Ω 1200MHz
LQP03TN51NJ02p51nH ±5% 300MHz 9 300MHz 100mA 3.90Ω 1200MHz
LQP03TN56NH02p56nH ±3% 300MHz 9 300MHz 100mA 3.90Ω 1200MHz
LQP03TN56NJ02p56nH ±5% 300MHz 9 300MHz 100mA 3.90Ω 1200MHz
LQP03TN62NH02p62nH ±3% 300MHz 8 300MHz 100mA 8Ω 1100MHz
LQP03TN62NJ02p62nH ±5% 300MHz 8 300MHz 100mA 8Ω 1100MHz
LQP03TN68NH02p68nH ±3% 300MHz 8 300MHz 100mA 8Ω 1100MHz
LQP03TN68NJ02p68nH ±5% 300MHz 8 300MHz 100mA 8Ω 1100MHz
LQP03TN75NH02p75nH ±3% 300MHz 8 300MHz 100mA 10Ω 1000MHz
LQP03TN75NJ02p75nH ±5% 300MHz 8 300MHz 100mA 10Ω 1000MHz
LQP03TN82NH02p82nH ±3% 300MHz 8 300MHz 100mA 10Ω 1000MHz
LQP03TN82NJ02p82nH ±5% 300MHz 8 300MHz 100mA 10Ω 1000MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
233
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TN91NH02p91nH ±3% 300MHz 8 300MHz 80mA 10Ω 900MHz
LQP03TN91NJ02p91nH ±5% 300MHz 8 300MHz 80mA 10Ω 900MHz
LQP03TNR10H02p100nH ±3% 300MHz 8 300MHz 80mA 10Ω 900MHz
LQP03TNR10J02p100nH ±5% 300MHz 8 300MHz 80mA 10Ω 900MHz
LQP03TNR11H02p110nH ±3% 300MHz 8 300MHz 80mA 12Ω 800MHz
LQP03TNR11J02p110nH ±5% 300MHz 8 300MHz 80mA 12Ω 800MHz
LQP03TNR12H02p120nH ±3% 300MHz 8 300MHz 80mA 12Ω 800MHz
LQP03TNR12J02p120nH ±5% 300MHz 8 300MHz 80mA 12Ω 800MHz
LQP03TNR13H02p130nH ±3% 100MHz 5 100MHz 80mA 9Ω 650MHz
LQP03TNR13J02p130nH ±5% 100MHz 5 100MHz 80mA 9Ω 650MHz
LQP03TNR15H02p150nH ±3% 100MHz 5 100MHz 80mA 9Ω 650MHz
LQP03TNR15J02p150nH ±5% 100MHz 5 100MHz 80mA 9Ω 650MHz
LQP03TNR16H02p160nH ±3% 100MHz 5 100MHz 70mA 11Ω 600MHz
LQP03TNR16J02p160nH ±5% 100MHz 5 100MHz 70mA 11Ω 600MHz
LQP03TNR18H02p180nH ±3% 100MHz 5 100MHz 70mA 11Ω 600MHz
LQP03TNR18J02p180nH ±5% 100MHz 5 100MHz 70mA 11Ω 600MHz
LQP03TNR20H02p200nH ±3% 100MHz 5 100MHz 60mA 13Ω 500MHz
LQP03TNR20J02p200nH ±5% 100MHz 5 100MHz 60mA 13Ω 500MHz
LQP03TNR22H02p220nH ±3% 100MHz 5 100MHz 60mA 13Ω 500MHz
LQP03TNR22J02p220nH ±5% 100MHz 5 100MHz 60mA 13Ω 500MHz
LQP03TNR24H02p240nH ±3% 100MHz 5 100MHz 60mA 15Ω 450MHz
LQP03TNR24J02p240nH ±5% 100MHz 5 100MHz 60mA 15Ω 450MHz
LQP03TNR27H02p270nH ±3% 100MHz 5 100MHz 60mA 15Ω 450MHz
LQP03TNR27J02p270nH ±5% 100MHz 5 100MHz 60mA 15Ω 450MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
234
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP03TQ_02 Series 0201 (0603) inch (mm)
Appearance/Dimensions
0.6±0.03
0.3±0.03
0.2±0.03
0.3±0.02
0.15±0.03 (in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 15000
Jø330mm Paper Taping 50000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TQ0N6W02p0.6nH ±0.05nH 500MHz 17 500MHz 1000mA 0.05Ω 20000MHz
LQP03TQ0N6B02p0.6nH ±0.1nH 500MHz 17 500MHz 1000mA 0.05Ω 20000MHz
LQP03TQ0N6C02p0.6nH ±0.2nH 500MHz 17 500MHz 1000mA 0.05Ω 20000MHz
LQP03TQ0N7W02p0.7nH ±0.05nH 500MHz 17 500MHz 1000mA 0.05Ω 20000MHz
LQP03TQ0N7B02p0.7nH ±0.1nH 500MHz 17 500MHz 1000mA 0.05Ω 20000MHz
LQP03TQ0N7C02p0.7nH ±0.2nH 500MHz 17 500MHz 1000mA 0.05Ω 20000MHz
LQP03TQ0N8W02p0.8nH ±0.05nH 500MHz 17 500MHz 1000mA 0.05Ω 18000MHz
LQP03TQ0N8B02p0.8nH ±0.1nH 500MHz 17 500MHz 1000mA 0.05Ω 18000MHz
LQP03TQ0N8C02p0.8nH ±0.2nH 500MHz 17 500MHz 1000mA 0.05Ω 18000MHz
LQP03TQ0N9W02p0.9nH ±0.05nH 500MHz 17 500MHz 800mA 0.08Ω 18000MHz
LQP03TQ0N9B02p0.9nH ±0.1nH 500MHz 17 500MHz 800mA 0.08Ω 18000MHz
LQP03TQ0N9C02p0.9nH ±0.2nH 500MHz 17 500MHz 800mA 0.08Ω 18000MHz
LQP03TQ1N0W02p1.0nH ±0.05nH 500MHz 17 500MHz 800mA 0.08Ω 17000MHz
LQP03TQ1N0B02p1.0nH ±0.1nH 500MHz 17 500MHz 800mA 0.08Ω 17000MHz
LQP03TQ1N0C02p1.0nH ±0.2nH 500MHz 17 500MHz 800mA 0.08Ω 17000MHz
LQP03TQ1N1W02p1.1nH ±0.05nH 500MHz 17 500MHz 800mA 0.08Ω 17000MHz
LQP03TQ1N1B02p1.1nH ±0.1nH 500MHz 17 500MHz 800mA 0.08Ω 17000MHz
LQP03TQ1N1C02p1.1nH ±0.2nH 500MHz 17 500MHz 800mA 0.08Ω 17000MHz
LQP03TQ1N2W02p1.2nH ±0.05nH 500MHz 17 500MHz 800mA 0.08Ω 17000MHz
LQP03TQ1N2B02p1.2nH ±0.1nH 500MHz 17 500MHz 800mA 0.08Ω 17000MHz
LQP03TQ1N2C02p1.2nH ±0.2nH 500MHz 17 500MHz 800mA 0.08Ω 17000MHz
LQP03TQ1N3W02p1.3nH ±0.05nH 500MHz 17 500MHz 700mA 0.1Ω 17000MHz
LQP03TQ1N3B02p1.3nH ±0.1nH 500MHz 17 500MHz 700mA 0.1Ω 17000MHz
LQP03TQ1N3C02p1.3nH ±0.2nH 500MHz 17 500MHz 700mA 0.1Ω 17000MHz
LQP03TQ1N4W02p1.4nH ±0.05nH 500MHz 17 500MHz 700mA 0.1Ω 16000MHz
LQP03TQ1N4B02p1.4nH ±0.1nH 500MHz 17 500MHz 700mA 0.1Ω 16000MHz
LQP03TQ1N4C02p1.4nH ±0.2nH 500MHz 17 500MHz 700mA 0.1Ω 16000MHz
LQP03TQ1N5W02p1.5nH ±0.05nH 500MHz 17 500MHz 650mA 0.1Ω 15000MHz
LQP03TQ1N5B02p1.5nH ±0.1nH 500MHz 17 500MHz 650mA 0.1Ω 15000MHz
LQP03TQ1N5C02p1.5nH ±0.2nH 500MHz 17 500MHz 650mA 0.1Ω 15000MHz
LQP03TQ1N6B02p1.6nH ±0.1nH 500MHz 17 500MHz 650mA 0.1Ω 15000MHz
LQP03TQ1N6C02p1.6nH ±0.2nH 500MHz 17 500MHz 650mA 0.1Ω 15000MHz
Operating temp. range: -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
235
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TQ1N7B02p1.7nH ±0.1nH 500MHz 17 500MHz 650mA 0.1Ω 15000MHz
LQP03TQ1N7C02p1.7nH ±0.2nH 500MHz 17 500MHz 650mA 0.1Ω 15000MHz
LQP03TQ1N8B02p1.8nH ±0.1nH 500MHz 17 500MHz 650mA 0.1Ω 15000MHz
LQP03TQ1N8C02p1.8nH ±0.2nH 500MHz 17 500MHz 650mA 0.1Ω 15000MHz
LQP03TQ1N9B02p1.9nH ±0.1nH 500MHz 17 500MHz 650mA 0.1Ω 12500MHz
LQP03TQ1N9C02p1.9nH ±0.2nH 500MHz 17 500MHz 650mA 0.1Ω 12500MHz
LQP03TQ2N0B02p2.0nH ±0.1nH 500MHz 17 500MHz 650mA 0.1Ω 12500MHz
LQP03TQ2N0C02p2.0nH ±0.2nH 500MHz 17 500MHz 650mA 0.1Ω 12500MHz
LQP03TQ2N1B02p2.1nH ±0.1nH 500MHz 17 500MHz 650mA 0.12Ω 11000MHz
LQP03TQ2N1C02p2.1nH ±0.2nH 500MHz 17 500MHz 650mA 0.12Ω 11000MHz
LQP03TQ2N2B02p2.2nH ±0.1nH 500MHz 17 500MHz 650mA 0.12Ω 11000MHz
LQP03TQ2N2C02p2.2nH ±0.2nH 500MHz 17 500MHz 650mA 0.12Ω 11000MHz
LQP03TQ2N3B02p2.3nH ±0.1nH 500MHz 17 500MHz 550mA 0.15Ω 11000MHz
LQP03TQ2N3C02p2.3nH ±0.2nH 500MHz 17 500MHz 550mA 0.15Ω 11000MHz
LQP03TQ2N4B02p2.4nH ±0.1nH 500MHz 17 500MHz 550mA 0.15Ω 11000MHz
LQP03TQ2N4C02p2.4nH ±0.2nH 500MHz 17 500MHz 550mA 0.15Ω 11000MHz
LQP03TQ2N5B02p2.5nH ±0.1nH 500MHz 17 500MHz 550mA 0.15Ω 10000MHz
LQP03TQ2N5C02p2.5nH ±0.2nH 500MHz 17 500MHz 550mA 0.15Ω 10000MHz
LQP03TQ2N6B02p2.6nH ±0.1nH 500MHz 17 500MHz 550mA 0.15Ω 10000MHz
LQP03TQ2N6C02p2.6nH ±0.2nH 500MHz 17 500MHz 550mA 0.15Ω 10000MHz
LQP03TQ2N7B02p2.7nH ±0.1nH 500MHz 17 500MHz 550mA 0.15Ω 10000MHz
LQP03TQ2N7C02p2.7nH ±0.2nH 500MHz 17 500MHz 550mA 0.15Ω 10000MHz
LQP03TQ2N8B02p2.8nH ±0.1nH 500MHz 17 500MHz 500mA 0.2Ω 10000MHz
LQP03TQ2N8C02p2.8nH ±0.2nH 500MHz 17 500MHz 500mA 0.2Ω 10000MHz
LQP03TQ2N9B02p2.9nH ±0.1nH 500MHz 17 500MHz 500mA 0.2Ω 10000MHz
LQP03TQ2N9C02p2.9nH ±0.2nH 500MHz 17 500MHz 500mA 0.2Ω 10000MHz
LQP03TQ3N0B02p3.0nH ±0.1nH 500MHz 17 500MHz 500mA 0.2Ω 9500MHz
LQP03TQ3N0C02p3.0nH ±0.2nH 500MHz 17 500MHz 500mA 0.2Ω 9500MHz
LQP03TQ3N1B02p3.1nH ±0.1nH 500MHz 17 500MHz 450mA 0.24Ω 9500MHz
LQP03TQ3N1C02p3.1nH ±0.2nH 500MHz 17 500MHz 450mA 0.24Ω 9500MHz
LQP03TQ3N2B02p3.2nH ±0.1nH 500MHz 17 500MHz 450mA 0.24Ω 9500MHz
LQP03TQ3N2C02p3.2nH ±0.2nH 500MHz 17 500MHz 450mA 0.24Ω 9500MHz
LQP03TQ3N3B02p3.3nH ±0.1nH 500MHz 17 500MHz 450mA 0.24Ω 9500MHz
LQP03TQ3N3C02p3.3nH ±0.2nH 500MHz 17 500MHz 450mA 0.24Ω 9500MHz
LQP03TQ3N4B02p3.4nH ±0.1nH 500MHz 17 500MHz 450mA 0.25Ω 8000MHz
LQP03TQ3N4C02p3.4nH ±0.2nH 500MHz 17 500MHz 450mA 0.25Ω 8000MHz
LQP03TQ3N5B02p3.5nH ±0.1nH 500MHz 17 500MHz 450mA 0.25Ω 8000MHz
LQP03TQ3N5C02p3.5nH ±0.2nH 500MHz 17 500MHz 450mA 0.25Ω 8000MHz
LQP03TQ3N6B02p3.6nH ±0.1nH 500MHz 17 500MHz 400mA 0.25Ω 8000MHz
LQP03TQ3N6C02p3.6nH ±0.2nH 500MHz 17 500MHz 400mA 0.25Ω 8000MHz
LQP03TQ3N7B02p3.7nH ±0.1nH 500MHz 17 500MHz 400mA 0.25Ω 6500MHz
LQP03TQ3N7C02p3.7nH ±0.2nH 500MHz 17 500MHz 400mA 0.25Ω 6500MHz
LQP03TQ3N8B02p3.8nH ±0.1nH 500MHz 17 500MHz 400mA 0.25Ω 6500MHz
LQP03TQ3N8C02p3.8nH ±0.2nH 500MHz 17 500MHz 400mA 0.25Ω 6500MHz
LQP03TQ3N9B02p3.9nH ±0.1nH 500MHz 17 500MHz 400mA 0.25Ω 6500MHz
LQP03TQ3N9C02p3.9nH ±0.2nH 500MHz 17 500MHz 400mA 0.25Ω 6500MHz
LQP03TQ4N0B02p4.0nH ±0.1nH 500MHz 17 500MHz 360mA 0.35Ω 6500MHz
LQP03TQ4N0C02p4.0nH ±0.2nH 500MHz 17 500MHz 360mA 0.35Ω 6500MHz
LQP03TQ4N1B02p4.1nH ±0.1nH 500MHz 17 500MHz 360mA 0.35Ω 6500MHz
LQP03TQ4N1C02p4.1nH ±0.2nH 500MHz 17 500MHz 360mA 0.35Ω 6500MHz
LQP03TQ4N2B02p4.2nH ±0.1nH 500MHz 17 500MHz 360mA 0.35Ω 6500MHz
LQP03TQ4N2C02p4.2nH ±0.2nH 500MHz 17 500MHz 360mA 0.35Ω 6500MHz
LQP03TQ4N3H02p4.3nH ±3% 500MHz 17 500MHz 360mA 0.35Ω 6500MHz
Operating temp. range: -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
236
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP03TQ4N3J02p4.3nH ±5% 500MHz 17 500MHz 360mA 0.35Ω 6500MHz
LQP03TQ4N7H02p4.7nH ±3% 500MHz 17 500MHz 350mA 0.35Ω 6500MHz
LQP03TQ4N7J02p4.7nH ±5% 500MHz 17 500MHz 350mA 0.35Ω 6500MHz
LQP03TQ5N1H02p5.1nH ±3% 500MHz 17 500MHz 350mA 0.39Ω 6500MHz
LQP03TQ5N1J02p5.1nH ±5% 500MHz 17 500MHz 350mA 0.39Ω 6500MHz
LQP03TQ5N6H02p5.6nH ±3% 500MHz 17 500MHz 350mA 0.39Ω 6000MHz
LQP03TQ5N6J02p5.6nH ±5% 500MHz 17 500MHz 350mA 0.39Ω 6000MHz
LQP03TQ6N2H02p6.2nH ±3% 500MHz 17 500MHz 300mA 0.55Ω 6000MHz
LQP03TQ6N2J02p6.2nH ±5% 500MHz 17 500MHz 300mA 0.55Ω 6000MHz
LQP03TQ6N8H02p6.8nH ±3% 500MHz 17 500MHz 300mA 0.55Ω 5400MHz
LQP03TQ6N8J02p6.8nH ±5% 500MHz 17 500MHz 300mA 0.55Ω 5400MHz
LQP03TQ7N5H02p7.5nH ±3% 500MHz 17 500MHz 300mA 0.55Ω 4800MHz
LQP03TQ7N5J02p7.5nH ±5% 500MHz 17 500MHz 300mA 0.55Ω 4800MHz
LQP03TQ8N2H02p8.2nH ±3% 500MHz 17 500MHz 250mA 0.65Ω 4800MHz
LQP03TQ8N2J02p8.2nH ±5% 500MHz 17 500MHz 250mA 0.65Ω 4800MHz
LQP03TQ9N1H02p9.1nH ±3% 500MHz 17 500MHz 250mA 0.65Ω 4500MHz
LQP03TQ9N1J02p9.1nH ±5% 500MHz 17 500MHz 250mA 0.65Ω 4500MHz
LQP03TQ10NH02p10nH ±3% 500MHz 17 500MHz 250mA 0.69Ω 4500MHz
LQP03TQ10NJ02p10nH ±5% 500MHz 17 500MHz 250mA 0.69Ω 4500MHz
LQP03TQ11NH02p11nH ±3% 500MHz 17 500MHz 250mA 0.69Ω 3700MHz
LQP03TQ11NJ02p11nH ±5% 500MHz 17 500MHz 250mA 0.69Ω 3700MHz
LQP03TQ12NH02p12nH ±3% 500MHz 17 500MHz 250mA 0.69Ω 3700MHz
LQP03TQ12NJ02p12nH ±5% 500MHz 17 500MHz 250mA 0.69Ω 3700MHz
LQP03TQ13NH02p13nH ±3% 500MHz 17 500MHz 250mA 0.69Ω 3700MHz
LQP03TQ13NJ02p13nH ±5% 500MHz 17 500MHz 250mA 0.69Ω 3700MHz
Operating temp. range: -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
237
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP15MN_02 Series 0402 (1005) inch (mm)
Appearance/Dimensions
0.5±0.10.35±0.1
1.0±0.1
0.25±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
Jø330mm Paper Taping 50000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP15MN1N0W02p1.0nH ±0.05nH 500MHz 13 500MHz 400mA 0.1Ω 6000MHz
LQP15MN1N0B02p1.0nH ±0.1nH 500MHz 13 500MHz 400mA 0.1Ω 6000MHz
LQP15MN1N1W02p1.1nH ±0.05nH 500MHz 13 500MHz 390mA 0.1Ω 6000MHz
LQP15MN1N1B02p1.1nH ±0.1nH 500MHz 13 500MHz 390mA 0.1Ω 6000MHz
LQP15MN1N2W02p1.2nH ±0.05nH 500MHz 13 500MHz 390mA 0.1Ω 6000MHz
LQP15MN1N2B02p1.2nH ±0.1nH 500MHz 13 500MHz 390mA 0.1Ω 6000MHz
LQP15MN1N3W02p1.3nH ±0.05nH 500MHz 13 500MHz 280mA 0.2Ω 6000MHz
LQP15MN1N3B02p1.3nH ±0.1nH 500MHz 13 500MHz 280mA 0.2Ω 6000MHz
LQP15MN1N4W02p1.4nH ±0.05nH 500MHz 13 500MHz 280mA 0.2Ω 6000MHz
LQP15MN1N5W02p1.5nH ±0.05nH 500MHz 13 500MHz 280mA 0.2Ω 6000MHz
LQP15MN1N5B02p1.5nH ±0.1nH 500MHz 13 500MHz 280mA 0.2Ω 6000MHz
LQP15MN1N6W02p1.6nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN1N6B02p1.6nH ±0.1nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN1N7W02p1.7nH ±0.05nH 500MHz 13 500MHz 280mA 0.2Ω 6000MHz
LQP15MN1N8W02p1.8nH ±0.05nH 500MHz 13 500MHz 280mA 0.2Ω 6000MHz
LQP15MN1N8B02p1.8nH ±0.1nH 500MHz 13 500MHz 280mA 0.2Ω 6000MHz
LQP15MN1N9W02p1.9nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N0W02p2.0nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N0B02p2.0nH ±0.1nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N1W02p2.1nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N2W02p2.2nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N2B02p2.2nH ±0.1nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N3W02p2.3nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N4W02p2.4nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N4B02p2.4nH ±0.1nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N5W02p2.5nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N6W02p2.6nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N7W02p2.7nH ±0.05nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N7B02p2.7nH ±0.1nH 500MHz 13 500MHz 220mA 0.3Ω 6000MHz
LQP15MN2N8W02p2.8nH ±0.05nH 500MHz 13 500MHz 190mA 0.4Ω 6000MHz
LQP15MN2N9W02p2.9nH ±0.05nH 500MHz 13 500MHz 190mA 0.4Ω 6000MHz
LQP15MN3N0W02p3.0nH ±0.05nH 500MHz 13 500MHz 190mA 0.4Ω 6000MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
238
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP15MN3N0B02p3.0nH ±0.1nH 500MHz 13 500MHz 190mA 0.4Ω 6000MHz
LQP15MN3N1W02p3.1nH ±0.05nH 500MHz 13 500MHz 190mA 0.4Ω 6000MHz
LQP15MN3N2W02p3.2nH ±0.05nH 500MHz 13 500MHz 190mA 0.4Ω 6000MHz
LQP15MN3N3W02p3.3nH ±0.05nH 500MHz 13 500MHz 190mA 0.4Ω 6000MHz
LQP15MN3N3B02p3.3nH ±0.1nH 500MHz 13 500MHz 190mA 0.4Ω 6000MHz
LQP15MN3N4W02p3.4nH ±0.05nH 500MHz 13 500MHz 170mA 0.5Ω 6000MHz
LQP15MN3N5W02p3.5nH ±0.05nH 500MHz 13 500MHz 170mA 0.5Ω 6000MHz
LQP15MN3N6W02p3.6nH ±0.05nH 500MHz 13 500MHz 170mA 0.5Ω 6000MHz
LQP15MN3N6B02p3.6nH ±0.1nH 500MHz 13 500MHz 170mA 0.5Ω 6000MHz
LQP15MN3N7W02p3.7nH ±0.05nH 500MHz 13 500MHz 170mA 0.5Ω 6000MHz
LQP15MN3N8W02p3.8nH ±0.05nH 500MHz 13 500MHz 170mA 0.5Ω 6000MHz
LQP15MN3N9W02p3.9nH ±0.05nH 500MHz 13 500MHz 170mA 0.5Ω 6000MHz
LQP15MN3N9B02p3.9nH ±0.1nH 500MHz 13 500MHz 170mA 0.5Ω 6000MHz
LQP15MN4N3B02p4.3nH ±0.1nH 500MHz 13 500MHz 160mA 0.6Ω 6000MHz
LQP15MN4N7B02p4.7nH ±0.1nH 500MHz 13 500MHz 160mA 0.6Ω 6000MHz
LQP15MN5N1B02p5.1nH ±0.1nH 500MHz 13 500MHz 140mA 0.7Ω 6000MHz
LQP15MN5N6B02p5.6nH ±0.1nH 500MHz 13 500MHz 140mA 0.7Ω 6000MHz
LQP15MN6N2B02p6.2nH ±0.1nH 500MHz 13 500MHz 130mA 0.9Ω 6000MHz
LQP15MN6N8B02p6.8nH ±0.1nH 500MHz 13 500MHz 130mA 0.9Ω 6000MHz
LQP15MN7N5B02p7.5nH ±0.1nH 500MHz 13 500MHz 110mA 1.1Ω 5500MHz
LQP15MN8N2B02p8.2nH ±0.1nH 500MHz 13 500MHz 110mA 1.1Ω 5500MHz
LQP15MN9N1B02p9.1nH ±0.1nH 500MHz 13 500MHz 100mA 1.3Ω 4500MHz
LQP15MN10NG02p10nH ±2% 500MHz 13 500MHz 100mA 1.3Ω 4500MHz
LQP15MN12NG02p12nH ±2% 500MHz 13 500MHz 90mA 1.6Ω 3700MHz
LQP15MN15NG02p15nH ±2% 500MHz 13 500MHz 90mA 1.8Ω 3300MHz
LQP15MN18NG02p18nH ±2% 500MHz 13 500MHz 80mA 2.0Ω 3100MHz
LQP15MN22NG02p22nH ±2% 500MHz 13 500MHz 70mA 2.6Ω 2800MHz
LQP15MN27NG02p27nH ±2% 500MHz 13 500MHz 70mA 3.1Ω 2500MHz
LQP15MN33NG02p33nH ±2% 500MHz 13 500MHz 60mA 3.8Ω 2100MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
239
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQP18MN_02 Series 0603 (1608) inch (mm)
Appearance/Dimensions
0.8±0.150.5±0.1
1.6±0.15
0.2 min.
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQP18MN1N3C02p1.3nH ±0.2nH 500MHz 17 500MHz 300mA 0.3Ω 6000MHz
LQP18MN1N5C02p1.5nH ±0.2nH 500MHz 17 500MHz 300mA 0.3Ω 6000MHz
LQP18MN1N8C02p1.8nH ±0.2nH 500MHz 17 500MHz 250mA 0.4Ω 6000MHz
LQP18MN2N2C02p2.2nH ±0.2nH 500MHz 17 500MHz 250mA 0.4Ω 6000MHz
LQP18MN2N7C02p2.7nH ±0.2nH 500MHz 17 500MHz 250mA 0.4Ω 6000MHz
LQP18MN3N3C02p3.3nH ±0.2nH 500MHz 17 500MHz 250mA 0.4Ω 6000MHz
LQP18MN3N9C02p3.9nH ±0.2nH 500MHz 17 500MHz 200mA 0.5Ω 5900MHz
LQP18MN4N7C02p4.7nH ±0.2nH 500MHz 17 500MHz 200mA 0.5Ω 5200MHz
LQP18MN5N6C02p5.6nH ±0.2nH 500MHz 17 500MHz 200mA 0.6Ω 4700MHz
LQP18MN6N8C02p6.8nH ±0.2nH 500MHz 17 500MHz 200mA 0.7Ω 4300MHz
LQP18MN8N2C02p8.2nH ±0.2nH 500MHz 17 500MHz 150mA 0.8Ω 3600MHz
LQP18MN10NG02p10nH ±2% 500MHz 17 500MHz 150mA 1.0Ω 3400MHz
LQP18MN12NG02p12nH ±2% 500MHz 17 500MHz 150mA 1.0Ω 3000MHz
LQP18MN15NG02p15nH ±2% 500MHz 17 500MHz 150mA 1.3Ω 2700MHz
LQP18MN18NG02p18nH ±2% 500MHz 17 500MHz 100mA 1.5Ω 2300MHz
LQP18MN22NG02p22nH ±2% 500MHz 17 500MHz 100mA 1.9Ω 2100MHz
LQP18MN27NG02p27nH ±2% 500MHz 17 500MHz 100mA 2.4Ω 1900MHz
LQP18MN33NG02p33nH ±2% 500MHz 17 500MHz 100mA 2.8Ω 1700MHz
LQP18MN39NG02p39nH ±2% 500MHz 17 500MHz 100mA 2.8Ω 1400MHz
LQP18MN47NG02p47nH ±2% 300MHz 17 300MHz 100mA 2.2Ω 1200MHz
LQP18MN56NG02p56nH ±2% 300MHz 17 300MHz 50mA 3.4Ω 1000MHz
LQP18MN68NG02p68nH ±2% 300MHz 17 300MHz 50mA 3.5Ω 900MHz
LQP18MN82NG02p82nH ±2% 300MHz 17 300MHz 50mA 4.6Ω 800MHz
LQP18MNR10G02p100nH ±2% 300MHz 17 300MHz 50mA 6.1Ω 700MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
240
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
241
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW03AW_00 Series 0201 (0603) inch (mm)
Appearance/Dimensions
0.53±0.05
0.4±0.05 0.4±0.05
0.15±0.05
0.06
(in mm)
+0.07
-
0.03
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW03AW1N0C00p1.0nH ±0.2nH 100MHz 48(Typ.) 900MHz 900mA 0.03Ω 19GHz
LQW03AW1N1C00p1.1nH ±0.2nH 100MHz 41(Typ.) 900MHz 660mA 0.06Ω 19GHz
LQW03AW1N7C00p1.7nH ±0.2nH 100MHz 41(Typ.) 900MHz 600mA 0.07Ω 19GHz
LQW03AW1N8C00p1.8nH ±0.2nH 100MHz 37(Typ.) 900MHz 520mA 0.1Ω 19GHz
LQW03AW1N9C00p1.9nH ±0.2nH 100MHz 41(Typ.) 900MHz 620mA 0.08Ω 19GHz
LQW03AW2N0C00p2.0nH ±0.2nH 100MHz 42(Typ.) 900MHz 490mA 0.1Ω 19GHz
LQW03AW2N1C00p2.1nH ±0.2nH 100MHz 35(Typ.) 900MHz 400mA 0.16Ω 19GHz
LQW03AW2N2C00p2.2nH ±0.2nH 100MHz 33(Typ.) 900MHz 400mA 0.16Ω 19GHz
LQW03AW2N7C00p2.7nH ±0.2nH 100MHz 46(Typ.) 900MHz 720mA 0.06Ω 15GHz
LQW03AW2N8C00p2.8nH ±0.2nH 100MHz 44(Typ.) 900MHz 600mA 0.08Ω 14GHz
LQW03AW2N9C00p2.9nH ±0.2nH 100MHz 41(Typ.) 900MHz 540mA 0.1Ω 13GHz
LQW03AW3N0C00p3.0nH ±0.2nH 100MHz 34(Typ.) 900MHz 350mA 0.22Ω 14GHz
LQW03AW3N1C00p3.1nH ±0.2nH 100MHz 48(Typ.) 900MHz 720mA 0.07Ω 12GHz
LQW03AW3N2C00p3.2nH ±0.2nH 100MHz 48(Typ.) 900MHz 580mA 0.08Ω 10GHz
LQW03AW3N3C00p3.3nH ±0.2nH 100MHz 47(Typ.) 900MHz 520mA 0.11Ω 11GHz
LQW03AW3N4C00p3.4nH ±0.2nH 100MHz 43(Typ.) 900MHz 440mA 0.15Ω 11GHz
LQW03AW3N5C00p3.5nH ±0.2nH 100MHz 43(Typ.) 900MHz 440mA 0.15Ω 12GHz
LQW03AW3N6C00p3.6nH ±0.2nH 100MHz 36(Typ.) 900MHz 340mA 0.23Ω 11GHz
LQW03AW3N7C00p3.7nH ±0.2nH 100MHz 38(Typ.) 900MHz 340mA 0.23Ω 11GHz
LQW03AW3N9C00p3.9nH ±0.2nH 100MHz 48(Typ.) 900MHz 650mA 0.07Ω 11GHz
LQW03AW4N3J00p4.3nH ±5% 100MHz 45(Typ.) 900MHz 480mA 0.12Ω 11GHz
LQW03AW4N7J00p4.7nH ±5% 100MHz 45(Typ.) 900MHz 620mA 0.09Ω 9.5GHz
LQW03AW5N1J00p5.1nH ±5% 100MHz 45(Typ.) 900MHz 480mA 0.14Ω 9.5GHz
LQW03AW5N4J00p5.4nH ±5% 100MHz 46 (Typ.) 900MHz 420mA 0.21Ω 9.5GHz
LQW03AW5N6J00p5.6nH ±5% 100MHz 37 (Typ.) 900MHz 330mA 0.33Ω 8.3GHz
LQW03AW5N8J00p5.8nH ±5% 100MHz 47 (Typ.) 900MHz 460mA 0.16Ω 8.8GHz
LQW03AW6N2J00p6.2nH ±5% 100MHz 39(Typ.) 900MHz 360mA 0.22Ω 9.9GHz
LQW03AW6N8J00p6.8nH ±5% 100MHz 42 (Typ.) 900MHz 460mA 0.18Ω 7.7GHz
LQW03AW7N5J00p7.5nH ±5% 100MHz 41 (Typ.) 900MHz 400mA 0.24Ω 7.5GHz
LQW03AW8N2J00p8.2nH ±5% 100MHz 40(Typ.) 900MHz 290mA 0.26Ω 8.5GHz
LQW03AW8N7J00p8.7nH ±5% 100MHz 39 (Typ.) 900MHz 290mA 0.42Ω 7.5GHz
LQW03AW9N1J00p9.1nH ±5% 100MHz 46 (Typ.) 900MHz 460mA 0.22Ω 6.4GHz
Operating temp. range (Self-temp. rise included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
242
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW03AW10NJ00p10nH ±5% 100MHz 37(Typ.) 900MHz 250mA 0.46Ω 7.2GHz
LQW03AW11NJ00p11nH ±5% 100MHz 37(Typ.) 900MHz 260mA 0.47Ω 7GHz
LQW03AW12NJ00p12.5nH ±5% 100MHz 39(Typ.) 900MHz 280mA 0.54Ω 6GHz
LQW03AW13NJ00p13nH ±5% 100MHz 39 (Typ.) 900MHz 280mA 0.54Ω 5.9GHz
LQW03AW14NJ00p13.5nH ±5% 100MHz 37(Typ.) 900MHz 240mA 0.53Ω 6GHz
LQW03AW15NJ00p15.5nH ±5% 100MHz 38(Typ.) 900MHz 230mA 0.6Ω 5.7GHz
Operating temp. range (Self-temp. rise included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
243
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW04AN_00 Series 03015 (0804) inch (mm)
Appearance/Dimensions
(in mm)
0.8±0.05
0.4±0.05
0.4±0.05
0.15±0.05
0.06 +0.09
-
0.03
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW04AN0N8C00p0.8nH ±0.2nH 100MHz 23 250MHz 1800mA 0.02Ω 20.0GHz
LQW04AN0N8D00p0.8nH ±0.5nH 100MHz 23 250MHz 1800mA 0.02Ω 20.0GHz
LQW04AN1N1C00p1.1nH ±0.2nH 100MHz 15 250MHz 990mA 0.03Ω 20.0GHz
LQW04AN1N1D00p1.1nH ±0.5nH 100MHz 15 250MHz 990mA 0.03Ω 20.0GHz
LQW04AN1N3C00p1.3nH ±0.2nH 100MHz 15 250MHz 1500mA 0.03Ω 20.0GHz
LQW04AN1N3D00p1.3nH ±0.5nH 100MHz 15 250MHz 1500mA 0.03Ω 20.0GHz
LQW04AN1N4C00p1.4nH ±0.2nH 100MHz 15 250MHz 1200mA 0.03Ω 20.0GHz
LQW04AN1N4D00p1.4nH ±0.5nH 100MHz 15 250MHz 1200mA 0.03Ω 20.0GHz
LQW04AN1N5C00p1.5nH ±0.2nH 100MHz 18 250MHz 940mA 0.05Ω 20.0GHz
LQW04AN1N5D00p1.5nH ±0.5nH 100MHz 18 250MHz 940mA 0.05Ω 20.0GHz
LQW04AN1N6C00p1.6nH ±0.2nH 100MHz 15 250MHz 700mA 0.06Ω 17.0GHz
LQW04AN1N6D00p1.6nH ±0.5nH 100MHz 15 250MHz 700mA 0.06Ω 17.0GHz
LQW04AN1N7C00p1.7nH ±0.2nH 100MHz 15 250MHz 700mA 0.06Ω 17.0GHz
LQW04AN1N7D00p1.7nH ±0.5nH 100MHz 15 250MHz 700mA 0.06Ω 17.0GHz
LQW04AN1N8C00p1.8nH ±0.2nH 100MHz 15 250MHz 700mA 0.06Ω 17.0GHz
LQW04AN1N8D00p1.8nH ±0.5nH 100MHz 15 250MHz 700mA 0.06Ω 17.0GHz
LQW04AN1N9C00p1.9nH ±0.2nH 100MHz 10 250MHz 490mA 0.12Ω 15.0GHz
LQW04AN1N9D00p1.9nH ±0.5nH 100MHz 10 250MHz 490mA 0.12Ω 15.0GHz
LQW04AN2N0C00p2.0nH ±0.2nH 100MHz 21 250MHz 1100mA 0.03Ω 20.0GHz
LQW04AN2N0D00p2.0nH ±0.5nH 100MHz 21 250MHz 1100mA 0.03Ω 20.0GHz
LQW04AN2N1C00p2.1nH ±0.2nH 100MHz 14 250MHz 1100mA 0.03Ω 12.0GHz
LQW04AN2N1D00p2.1nH ±0.5nH 100MHz 14 250MHz 1100mA 0.03Ω 12.0GHz
LQW04AN2N2C00p2.2nH ±0.2nH 100MHz 21 250MHz 1100mA 0.04Ω 12.0GHz
LQW04AN2N2D00p2.2nH ±0.5nH 100MHz 21 250MHz 1100mA 0.04Ω 12.0GHz
LQW04AN2N3C00p2.3nH ±0.2nH 100MHz 18 250MHz 780mA 0.07Ω 20.0GHz
LQW04AN2N3D00p2.3nH ±0.5nH 100MHz 18 250MHz 780mA 0.07Ω 20.0GHz
LQW04AN2N4C00p2.4nH ±0.2nH 100MHz 15 250MHz 570mA 0.07Ω 15.0GHz
LQW04AN2N4D00p2.4nH ±0.5nH 100MHz 15 250MHz 570mA 0.07Ω 15.0GHz
LQW04AN2N5C00p2.5nH ±0.2nH 100MHz 10 250MHz 490mA 0.12Ω 10.0GHz
LQW04AN2N5D00p2.5nH ±0.5nH 100MHz 10 250MHz 490mA 0.12Ω 10.0GHz
LQW04AN2N6C00p2.6nH ±0.2nH 100MHz 15 250MHz 620mA 0.07Ω 15.0GHz
LQW04AN2N6D00p2.6nH ±0.5nH 100MHz 15 250MHz 620mA 0.07Ω 15.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
244
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW04AN2N7C00p2.7nH ±0.2nH 100MHz 15 250MHz 570mA 0.07Ω 15.0GHz
LQW04AN2N7D00p2.7nH ±0.5nH 100MHz 15 250MHz 570mA 0.07Ω 15.0GHz
LQW04AN2N8C00p2.8nH ±0.2nH 100MHz 15 250MHz 620mA 0.07Ω 15.0GHz
LQW04AN2N8D00p2.8nH ±0.5nH 100MHz 15 250MHz 620mA 0.07Ω 15.0GHz
LQW04AN2N9C00p2.9nH ±0.2nH 100MHz 10 250MHz 490mA 0.12Ω 13.0GHz
LQW04AN2N9D00p2.9nH ±0.5nH 100MHz 10 250MHz 490mA 0.12Ω 13.0GHz
LQW04AN3N0C00p3.0nH ±0.2nH 100MHz 15 250MHz 620mA 0.07Ω 13.0GHz
LQW04AN3N0D00p3.0nH ±0.5nH 100MHz 15 250MHz 620mA 0.07Ω 13.0GHz
LQW04AN3N1C00p3.1nH ±0.2nH 100MHz 10 250MHz 490mA 0.12Ω 10.0GHz
LQW04AN3N1D00p3.1nH ±0.5nH 100MHz 10 250MHz 490mA 0.12Ω 10.0GHz
LQW04AN3N2C00p3.2nH ±0.2nH 100MHz 10 250MHz 400mA 0.17Ω 9.0GHz
LQW04AN3N2D00p3.2nH ±0.5nH 100MHz 10 250MHz 400mA 0.17Ω 9.0GHz
LQW04AN3N3C00p3.3nH ±0.2nH 100MHz 10 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN3N3D00p3.3nH ±0.5nH 100MHz 10 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN3N4C00p3.4nH ±0.2nH 100MHz 10 250MHz 310mA 0.27Ω 8.0GHz
LQW04AN3N4D00p3.4nH ±0.5nH 100MHz 10 250MHz 310mA 0.27Ω 8.0GHz
LQW04AN3N6C00p3.6nH ±0.2nH 100MHz 15 250MHz 530mA 0.10Ω 13.0GHz
LQW04AN3N6D00p3.6nH ±0.5nH 100MHz 15 250MHz 530mA 0.10Ω 13.0GHz
LQW04AN3N7C00p3.7nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN3N7D00p3.7nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN3N8C00p3.8nH ±0.2nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN3N8D00p3.8nH ±0.5nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN3N9C00p3.9nH ±0.2nH 100MHz 15 250MHz 530mA 0.10Ω 12.0GHz
LQW04AN3N9D00p3.9nH ±0.5nH 100MHz 15 250MHz 530mA 0.10Ω 12.0GHz
LQW04AN4N0C00p4nH ±0.2nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN4N0D00p4nH ±0.5nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN4N1C00p4.1nH ±0.2nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN4N1D00p4.1nH ±0.5nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN4N2C00p4.2nH ±0.2nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN4N2D00p4.2nH ±0.5nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN4N3C00p4.3nH ±0.2nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN4N3D00p4.3nH ±0.5nH 100MHz 15 250MHz 530mA 0.10Ω 11.0GHz
LQW04AN4N4C00p4.4nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN4N4D00p4.4nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN4N5C00p4.5nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN4N5D00p4.5nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN4N6C00p4.6nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN4N6D00p4.6nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN4N7C00p4.7nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN4N7D00p4.7nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 10.0GHz
LQW04AN4N8C00p4.8nH ±0.2nH 100MHz 15 250MHz 350mA 0.23Ω 9.0GHz
LQW04AN4N8D00p4.8nH ±0.5nH 100MHz 15 250MHz 350mA 0.23Ω 9.0GHz
LQW04AN4N9C00p4.9nH ±0.2nH 100MHz 15 250MHz 350mA 0.23Ω 9.0GHz
LQW04AN4N9D00p4.9nH ±0.5nH 100MHz 15 250MHz 350mA 0.23Ω 9.0GHz
LQW04AN5N0C00p5nH ±0.2nH 100MHz 15 250MHz 350mA 0.23Ω 9.0GHz
LQW04AN5N0D00p5nH ±0.5nH 100MHz 15 250MHz 350mA 0.23Ω 9.0GHz
LQW04AN5N1C00p5.1nH ±0.2nH 100MHz 20 250MHz 470mA 0.12Ω 10.0GHz
LQW04AN5N1D00p5.1nH ±0.5nH 100MHz 20 250MHz 470mA 0.12Ω 10.0GHz
LQW04AN5N2C00p5.2nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N2D00p5.2nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N3C00p5.3nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N3D00p5.3nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N4C00p5.4nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
245
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW04AN5N4D00p5.4nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N5C00p5.5nH ±0.2nH 100MHz 20 250MHz 470mA 0.12Ω 9.0GHz
LQW04AN5N5D00p5.5nH ±0.5nH 100MHz 20 250MHz 470mA 0.12Ω 9.0GHz
LQW04AN5N6C00p5.6nH ±0.2nH 100MHz 20 250MHz 470mA 0.12Ω 9.0GHz
LQW04AN5N6D00p5.6nH ±0.5nH 100MHz 20 250MHz 470mA 0.12Ω 9.0GHz
LQW04AN5N7C00p5.7nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N7D00p5.7nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N8C00p5.8nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N8D00p5.8nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N9C00p5.9nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN5N9D00p5.9nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N0C00p6nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N0D00p6nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N1C00p6.1nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N1D00p6.1nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N2C00p6.2nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N2D00p6.2nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N3C00p6.3nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N3D00p6.3nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N4C00p6.4nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N4D00p6.4nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N5C00p6.5nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N5D00p6.5nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N6C00p6.6nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N6D00p6.6nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N7C00p6.7nH ±0.2nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N7D00p6.7nH ±0.5nH 100MHz 20 250MHz 390mA 0.19Ω 9.0GHz
LQW04AN6N8C00p6.8nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 9.0GHz
LQW04AN6N8D00p6.8nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 9.0GHz
LQW04AN6N9C00p6.9nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN6N9D00p6.9nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N0C00p7nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N0D00p7nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N1C00p7.1nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N1D00p7.1nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N2C00p7.2nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N2D00p7.2nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N3C00p7.3nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N3D00p7.3nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N4C00p7.4nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N4D00p7.4nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N5C00p7.5nH ±0.2nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N5D00p7.5nH ±0.5nH 100MHz 20 250MHz 440mA 0.14Ω 8.0GHz
LQW04AN7N6C00p7.6nH ±0.2nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN7N6D00p7.6nH ±0.5nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN7N7C00p7.7nH ±0.2nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN7N7D00p7.7nH ±0.5nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN7N8C00p7.8nH ±0.2nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN7N8D00p7.8nH ±0.5nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN7N9C00p7.9nH ±0.2nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN7N9D00p7.9nH ±0.5nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N0C00p8nH ±0.2nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N0D00p8nH ±0.5nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
246
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW04AN8N1C00p8.1nH ±0.2nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N1D00p8.1nH ±0.5nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N2C00p8.2nH ±0.2nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N2D00p8.2nH ±0.5nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N3C00p8.3nH ±0.2nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N3D00p8.3nH ±0.5nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N4C00p8.4nH ±0.2nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N4D00p8.4nH ±0.5nH 100MHz 20 250MHz 350mA 0.23Ω 8.0GHz
LQW04AN8N5C00p8.5nH ±0.2nH 100MHz 15 250MHz 290mA 0.33Ω 7.0GHz
LQW04AN8N5D00p8.5nH ±0.5nH 100MHz 15 250MHz 290mA 0.33Ω 7.0GHz
LQW04AN8N6C00p8.6nH ±0.2nH 100MHz 15 250MHz 290mA 0.33Ω 7.0GHz
LQW04AN8N6D00p8.6nH ±0.5nH 100MHz 15 250MHz 290mA 0.33Ω 7.0GHz
LQW04AN8N7C00p8.7nH ±0.2nH 100MHz 15 250MHz 290mA 0.33Ω 7.0GHz
LQW04AN8N7D00p8.7nH ±0.5nH 100MHz 15 250MHz 290mA 0.33Ω 7.0GHz
LQW04AN8N8C00p8.8nH ±0.2nH 100MHz 15 250MHz 290mA 0.33Ω 7.0GHz
LQW04AN8N8D00p8.8nH ±0.5nH 100MHz 15 250MHz 290mA 0.33Ω 7.0GHz
LQW04AN8N9C00p8.9nH ±0.2nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN8N9D00p8.9nH ±0.5nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N0C00p9nH ±0.2nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N0D00p9nH ±0.5nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N1C00p9.1nH ±0.2nH 100MHz 20 250MHz 400mA 0.16Ω 7.0GHz
LQW04AN9N1D00p9.1nH ±0.5nH 100MHz 20 250MHz 400mA 0.16Ω 7.0GHz
LQW04AN9N2C00p9.2nH ±0.2nH 100MHz 20 250MHz 400mA 0.16Ω 7.0GHz
LQW04AN9N2D00p9.2nH ±0.5nH 100MHz 20 250MHz 400mA 0.16Ω 7.0GHz
LQW04AN9N3C00p9.3nH ±0.2nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N3D00p9.3nH ±0.5nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N4C00p9.4nH ±0.2nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N4D00p9.4nH ±0.5nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N5C00p9.5nH ±0.2nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N5D00p9.5nH ±0.5nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N6C00p9.6nH ±0.2nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N6D00p9.6nH ±0.5nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N7C00p9.7nH ±0.2nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N7D00p9.7nH ±0.5nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N8C00p9.8nH ±0.2nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N8D00p9.8nH ±0.5nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N9C00p9.9nH ±0.2nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN9N9D00p9.9nH ±0.5nH 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN10NH00p10nH ±3% 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN10NJ00p10nH ±5% 100MHz 20 250MHz 330mA 0.26Ω 7.0GHz
LQW04AN11NH00p11nH ±3% 100MHz 15 250MHz 310mA 0.28Ω 7.0GHz
LQW04AN11NJ00p11nH ±5% 100MHz 15 250MHz 310mA 0.28Ω 7.0GHz
LQW04AN12NH00p12nH ±3% 100MHz 15 250MHz 310mA 0.28Ω 6.0GHz
LQW04AN12NJ00p12nH ±5% 100MHz 15 250MHz 310mA 0.28Ω 6.0GHz
LQW04AN13NH00p13nH ±3% 100MHz 15 250MHz 280mA 0.34Ω 6.0GHz
LQW04AN13NJ00p13nH ±5% 100MHz 15 250MHz 280mA 0.34Ω 6.0GHz
LQW04AN14NH00p14nH ±3% 100MHz 15 250MHz 280mA 0.34Ω 6.0GHz
LQW04AN14NJ00p14nH ±5% 100MHz 15 250MHz 280mA 0.34Ω 6.0GHz
LQW04AN15NH00p15nH ±3% 100MHz 15 250MHz 240mA 0.48Ω 5.5GHz
LQW04AN15NJ00p15nH ±5% 100MHz 15 250MHz 240mA 0.48Ω 5.5GHz
LQW04AN16NH00p16nH ±3% 100MHz 15 250MHz 270mA 0.38Ω 5.5GHz
LQW04AN16NJ00p16nH ±5% 100MHz 15 250MHz 270mA 0.38Ω 5.5GHz
LQW04AN18NH00p18nH ±3% 100MHz 15 250MHz 220mA 0.54Ω 5.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
247
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW04AN18NJ00p18nH ±5% 100MHz 15 250MHz 220mA 0.54Ω 5.0GHz
LQW04AN19NH00p19nH ±3% 100MHz 15 250MHz 160mA 0.73Ω 5.0GHz
LQW04AN19NJ00p19nH ±5% 100MHz 15 250MHz 160mA 0.73Ω 5.0GHz
LQW04AN20NH00p20nH ±3% 100MHz 15 250MHz 210mA 0.56Ω 5.0GHz
LQW04AN20NJ00p20nH ±5% 100MHz 15 250MHz 210mA 0.56Ω 5.0GHz
LQW04AN22NH00p22nH ±3% 100MHz 15 250MHz 200mA 0.63Ω 5.0GHz
LQW04AN22NJ00p22nH ±5% 100MHz 15 250MHz 200mA 0.63Ω 5.0GHz
LQW04AN23NH00p23nH ±3% 100MHz 15 250MHz 160mA 0.95Ω 4.0GHz
LQW04AN23NJ00p23nH ±5% 100MHz 15 250MHz 160mA 0.95Ω 4.0GHz
LQW04AN24NH00p24nH ±3% 100MHz 15 250MHz 160mA 0.95Ω 4.0GHz
LQW04AN24NJ00p24nH ±5% 100MHz 15 250MHz 160mA 0.95Ω 4.0GHz
LQW04AN25NH00p25nH ±3% 100MHz 15 250MHz 160mA 0.95Ω 4.0GHz
LQW04AN25NJ00p25nH ±5% 100MHz 15 250MHz 160mA 0.95Ω 4.0GHz
LQW04AN27NH00p27nH ±3% 100MHz 15 250MHz 160mA 0.95Ω 4.0GHz
LQW04AN27NJ00p27nH ±5% 100MHz 15 250MHz 160mA 0.95Ω 4.0GHz
LQW04AN33NH00p33nH ±3% 100MHz 15 250MHz 140mA 1.11Ω 4.0GHz
LQW04AN33NJ00p33nH ±5% 100MHz 15 250MHz 140mA 1.11Ω 4.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
248
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW04AN_10 Series 03015 (0804) inch (mm)
Appearance/Dimensions
(in mm)
0.8±0.05
0.4±0.05
0.4±0.05
0.15±0.05
0.06 +0.09
-
0.03
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW04AN36NJ10p36nH ±5% 100MHz 18 250MHz 200mA 1.08Ω 2.1GHz
LQW04AN39NJ10p39nH ±5% 100MHz 16 250MHz 200mA 1.08Ω 1.2GHz
LQW04AN43NJ10p43nH ±5% 100MHz 15 250MHz 180mA 1.2Ω 1.6GHz
LQW04AN47NJ10p47nH ±5% 100MHz 16 250MHz 180mA 1.2Ω 1.6GHz
LQW04AN52NJ10p52nH ±5% 100MHz 15 250MHz 180mA 1.32Ω 1.4GHz
LQW04AN56NJ10p56nH ±5% 100MHz 13 250MHz 180mA 1.32Ω 1.2GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
249
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW15AN_00 Series 0402 (1005) inch (mm)
Appearance/Dimensions
W
0.6±0.1
0.5±0.1
Inductance (nH)
1.5-23
24-120
(in mm)
*
0.5±0.1
W*
0.5±0.1
1.0±0.1
0.2±0.1 0.2±0.1
0.10±0.05
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN1N5B00p1.5nH ±0.1nH 100MHz 10 250MHz 1000mA 0.03Ω 18.0GHz
LQW15AN1N5C00p1.5nH ±0.2nH 100MHz 10 250MHz 1000mA 0.03Ω 18.0GHz
LQW15AN1N5D00p1.5nH ±0.5nH 100MHz 10 250MHz 1000mA 0.03Ω 18.0GHz
LQW15AN1N6C00p1.6nH ±0.2nH 100MHz 10 250MHz 750mA 0.07Ω 17.0GHz
LQW15AN1N6D00p1.6nH ±0.5nH 100MHz 10 250MHz 750mA 0.07Ω 17.0GHz
LQW15AN1N7C00p1.7nH ±0.2nH 100MHz 10 250MHz 640mA 0.10Ω 17.0GHz
LQW15AN1N7D00p1.7nH ±0.5nH 100MHz 10 250MHz 640mA 0.10Ω 17.0GHz
LQW15AN1N8C00p1.8nH ±0.2nH 100MHz 10 250MHz 460mA 0.16Ω 16.0GHz
LQW15AN1N8D00p1.8nH ±0.5nH 100MHz 10 250MHz 460mA 0.16Ω 16.0GHz
LQW15AN2N4B00p2.4nH ±0.1nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N4C00p2.4nH ±0.2nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N4D00p2.4nH ±0.5nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N5B00p2.5nH ±0.1nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N5C00p2.5nH ±0.2nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N5D00p2.5nH ±0.5nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N6B00p2.6nH ±0.1nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N6C00p2.6nH ±0.2nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N6D00p2.6nH ±0.5nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N7B00p2.7nH ±0.1nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N7C00p2.7nH ±0.2nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N7D00p2.7nH ±0.5nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N8B00p2.8nH ±0.1nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N8C00p2.8nH ±0.2nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N8D00p2.8nH ±0.5nH 100MHz 20 250MHz 850mA 0.05Ω 15.0GHz
LQW15AN2N9B00p2.9nH ±0.1nH 100MHz 20 250MHz 750mA 0.07Ω 15.0GHz
LQW15AN2N9C00p2.9nH ±0.2nH 100MHz 20 250MHz 750mA 0.07Ω 15.0GHz
LQW15AN2N9D00p2.9nH ±0.5nH 100MHz 20 250MHz 750mA 0.07Ω 15.0GHz
LQW15AN3N0B00p3.0nH ±0.1nH 100MHz 20 250MHz 750mA 0.07Ω 15.0GHz
LQW15AN3N0C00p3.0nH ±0.2nH 100MHz 20 250MHz 750mA 0.07Ω 15.0GHz
LQW15AN3N0D00p3.0nH ±0.5nH 100MHz 20 250MHz 750mA 0.07Ω 15.0GHz
LQW15AN3N1B00p3.1nH ±0.1nH 100MHz 20 250MHz 570mA 0.13Ω 14.0GHz
LQW15AN3N1C00p3.1nH ±0.2nH 100MHz 20 250MHz 570mA 0.13Ω 14.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
250
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN3N1D00p3.1nH ±0.5nH 100MHz 20 250MHz 570mA 0.13Ω 14.0GHz
LQW15AN3N2B00p3.2nH ±0.1nH 100MHz 15 250MHz 500mA 0.17Ω 14.0GHz
LQW15AN3N2C00p3.2nH ±0.2nH 100MHz 15 250MHz 500mA 0.17Ω 14.0GHz
LQW15AN3N2D00p3.2nH ±0.5nH 100MHz 15 250MHz 500mA 0.17Ω 14.0GHz
LQW15AN3N9B00p3.9nH ±0.1nH 100MHz 25 250MHz 750mA 0.07Ω 10.0GHz
LQW15AN3N9C00p3.9nH ±0.2nH 100MHz 25 250MHz 750mA 0.07Ω 10.0GHz
LQW15AN3N9D00p3.9nH ±0.5nH 100MHz 25 250MHz 750mA 0.07Ω 10.0GHz
LQW15AN4N1B00p4.1nH ±0.1nH 100MHz 25 250MHz 750mA 0.07Ω 10.0GHz
LQW15AN4N1C00p4.1nH ±0.2nH 100MHz 25 250MHz 750mA 0.07Ω 10.0GHz
LQW15AN4N1D00p4.1nH ±0.5nH 100MHz 25 250MHz 750mA 0.07Ω 10.0GHz
LQW15AN4N3B00p4.3nH ±0.1nH 100MHz 25 250MHz 750mA 0.07Ω 10.0GHz
LQW15AN4N3C00p4.3nH ±0.2nH 100MHz 25 250MHz 750mA 0.07Ω 10.0GHz
LQW15AN4N3D00p4.3nH ±0.5nH 100MHz 25 250MHz 750mA 0.07Ω 10.0GHz
LQW15AN4N4B00p4.4nH ±0.1nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N4C00p4.4nH ±0.2nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N4D00p4.4nH ±0.5nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N5B00p4.5nH ±0.1nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N5C00p4.5nH ±0.2nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N5D00p4.5nH ±0.5nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N6B00p4.6nH ±0.1nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N6C00p4.6nH ±0.2nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N6D00p4.6nH ±0.5nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N7B00p4.7nH ±0.1nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N7C00p4.7nH ±0.2nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N7D00p4.7nH ±0.5nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N8B00p4.8nH ±0.1nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N8C00p4.8nH ±0.2nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N8D00p4.8nH ±0.5nH 100MHz 25 250MHz 750mA 0.07Ω 8.0GHz
LQW15AN4N9B00p4.9nH ±0.1nH 100MHz 25 250MHz 600mA 0.12Ω 8.0GHz
LQW15AN4N9C00p4.9nH ±0.2nH 100MHz 25 250MHz 600mA 0.12Ω 8.0GHz
LQW15AN4N9D00p4.9nH ±0.5nH 100MHz 25 250MHz 600mA 0.12Ω 8.0GHz
LQW15AN5N0B00p5.0nH ±0.1nH 100MHz 25 250MHz 600mA 0.12Ω 8.0GHz
LQW15AN5N0C00p5.0nH ±0.2nH 100MHz 25 250MHz 600mA 0.12Ω 8.0GHz
LQW15AN5N0D00p5.0nH ±0.5nH 100MHz 25 250MHz 600mA 0.12Ω 8.0GHz
LQW15AN5N1B00p5.1nH ±0.1nH 100MHz 25 250MHz 600mA 0.12Ω 8.0GHz
LQW15AN5N1C00p5.1nH ±0.2nH 100MHz 25 250MHz 600mA 0.12Ω 8.0GHz
LQW15AN5N1D00p5.1nH ±0.5nH 100MHz 25 250MHz 600mA 0.12Ω 8.0GHz
LQW15AN5N8B00p5.8nH ±0.1nH 100MHz 25 250MHz 700mA 0.09Ω 8.0GHz
LQW15AN5N8C00p5.8nH ±0.2nH 100MHz 25 250MHz 700mA 0.09Ω 8.0GHz
LQW15AN5N8D00p5.8nH ±0.5nH 100MHz 25 250MHz 700mA 0.09Ω 8.0GHz
LQW15AN6N2B00p6.2nH ±0.1nH 100MHz 25 250MHz 700mA 0.09Ω 8.0GHz
LQW15AN6N2C00p6.2nH ±0.2nH 100MHz 25 250MHz 700mA 0.09Ω 8.0GHz
LQW15AN6N2D00p6.2nH ±0.5nH 100MHz 25 250MHz 700mA 0.09Ω 8.0GHz
LQW15AN6N3B00p6.3nH ±0.1nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N3C00p6.3nH ±0.2nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N3D00p6.3nH ±0.5nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N4B00p6.4nH ±0.1nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N4C00p6.4nH ±0.2nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N4D00p6.4nH ±0.5nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N5B00p6.5nH ±0.1nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N5C00p6.5nH ±0.2nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N5D00p6.5nH ±0.5nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N6B00p6.6nH ±0.1nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
251
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN6N6C00p6.6nH ±0.2nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N6D00p6.6nH ±0.5nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N7B00p6.7nH ±0.1nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N7C00p6.7nH ±0.2nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N7D00p6.7nH ±0.5nH 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N8G00p6.8nH ±2% 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N8H00p6.8nH ±3% 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N8J00p6.8nH ±5% 100MHz 25 250MHz 700mA 0.09Ω 6.0GHz
LQW15AN6N9G00p6.9nH ±2% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN6N9H00p6.9nH ±3% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN6N9J00p6.9nH ±5% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N0G00p7.0nH ±2% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N0H00p7.0nH ±3% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N0J00p7.0nH ±5% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N1G00p7.1nH ±2% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N1H00p7.1nH ±3% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N1J00p7.1nH ±5% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N2G00p7.2nH ±2% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N2H00p7.2nH ±3% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N2J00p7.2nH ±5% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N3G00p7.3nH ±2% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N3H00p7.3nH ±3% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N3J00p7.3nH ±5% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N5G00p7.5nH ±2% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N5H00p7.5nH ±3% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN7N5J00p7.5nH ±5% 100MHz 25 250MHz 570mA 0.13Ω 6.0GHz
LQW15AN8N2G00p8.2nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N2H00p8.2nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N2J00p8.2nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N6G00p8.6nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N6H00p8.6nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N6J00p8.6nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N7G00p8.7nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N7H00p8.7nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N7J00p8.7nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N8G00p8.8nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N8H00p8.8nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N8J00p8.8nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N9G00p8.9nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N9H00p8.9nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN8N9J00p8.9nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N0G00p9.0nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N0H00p9.0nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N0J00p9.0nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N1G00p9.1nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N1H00p9.1nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N1J00p9.1nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N2G00p9.2nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N2H00p9.2nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N2J00p9.2nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N3G00p9.3nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N3H00p9.3nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N3J00p9.3nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
252
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN9N4G00p9.4nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N4H00p9.4nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N4J00p9.4nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N5G00p9.5nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N5H00p9.5nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N5J00p9.5nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N6G00p9.6nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N6H00p9.6nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N6J00p9.6nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N7G00p9.7nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N7H00p9.7nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N7J00p9.7nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N8G00p9.8nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N8H00p9.8nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N8J00p9.8nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N9G00p9.9nH ±2% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N9H00p9.9nH ±3% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN9N9J00p9.9nH ±5% 100MHz 25 250MHz 540mA 0.14Ω 5.5GHz
LQW15AN10NG00p10nH ±2% 100MHz 25 250MHz 500mA 0.17Ω 5.5GHz
LQW15AN10NH00p10nH ±3% 100MHz 25 250MHz 500mA 0.17Ω 5.5GHz
LQW15AN10NJ00p10nH ±5% 100MHz 25 250MHz 500mA 0.17Ω 5.5GHz
LQW15AN11NG00p11nH ±2% 100MHz 30 250MHz 500mA 0.14Ω 5.5GHz
LQW15AN11NH00p11nH ±3% 100MHz 30 250MHz 500mA 0.14Ω 5.5GHz
LQW15AN11NJ00p11nH ±5% 100MHz 30 250MHz 500mA 0.14Ω 5.5GHz
LQW15AN12NG00p12nH ±2% 100MHz 30 250MHz 500mA 0.14Ω 5.5GHz
LQW15AN12NH00p12nH ±3% 100MHz 30 250MHz 500mA 0.14Ω 5.5GHz
LQW15AN12NJ00p12nH ±5% 100MHz 30 250MHz 500mA 0.14Ω 5.5GHz
LQW15AN13NG00p13nH ±2% 100MHz 25 250MHz 430mA 0.21Ω 5.0GHz
LQW15AN13NH00p13nH ±3% 100MHz 25 250MHz 430mA 0.21Ω 5.0GHz
LQW15AN13NJ00p13nH ±5% 100MHz 25 250MHz 430mA 0.21Ω 5.0GHz
LQW15AN15NG00p15nH ±2% 100MHz 30 250MHz 460mA 0.16Ω 5.0GHz
LQW15AN15NH00p15nH ±3% 100MHz 30 250MHz 460mA 0.16Ω 5.0GHz
LQW15AN15NJ00p15nH ±5% 100MHz 30 250MHz 460mA 0.16Ω 5.0GHz
LQW15AN16NG00p16nH ±2% 100MHz 25 250MHz 370mA 0.24Ω 4.5GHz
LQW15AN16NH00p16nH ±3% 100MHz 25 250MHz 370mA 0.24Ω 4.5GHz
LQW15AN16NJ00p16nH ±5% 100MHz 25 250MHz 370mA 0.24Ω 4.5GHz
LQW15AN18NG00p18nH ±2% 100MHz 25 250MHz 370mA 0.27Ω 4.5GHz
LQW15AN18NH00p18nH ±3% 100MHz 25 250MHz 370mA 0.27Ω 4.5GHz
LQW15AN18NJ00p18nH ±5% 100MHz 25 250MHz 370mA 0.27Ω 4.5GHz
LQW15AN19NG00p19nH ±2% 100MHz 25 250MHz 370mA 0.27Ω 4.5GHz
LQW15AN19NH00p19nH ±3% 100MHz 25 250MHz 370mA 0.27Ω 4.5GHz
LQW15AN19NJ00p19nH ±5% 100MHz 25 250MHz 370mA 0.27Ω 4.5GHz
LQW15AN20NG00p20nH ±2% 100MHz 25 250MHz 370mA 0.27Ω 4.0GHz
LQW15AN20NH00p20nH ±3% 100MHz 25 250MHz 370mA 0.27Ω 4.0GHz
LQW15AN20NJ00p20nH ±5% 100MHz 25 250MHz 370mA 0.27Ω 4.0GHz
LQW15AN22NG00p22nH ±2% 100MHz 25 250MHz 310mA 0.30Ω 4.0GHz
LQW15AN22NH00p22nH ±3% 100MHz 25 250MHz 310mA 0.30Ω 4.0GHz
LQW15AN22NJ00p22nH ±5% 100MHz 25 250MHz 310mA 0.30Ω 4.0GHz
LQW15AN23NG00p23nH ±2% 100MHz 25 250MHz 310mA 0.30Ω 3.8GHz
LQW15AN23NH00p23nH ±3% 100MHz 25 250MHz 310mA 0.30Ω 3.8GHz
LQW15AN23NJ00p23nH ±5% 100MHz 25 250MHz 310mA 0.30Ω 3.8GHz
LQW15AN24NG00p24nH ±2% 100MHz 25 250MHz 280mA 0.52Ω 3.5GHz
LQW15AN24NH00p24nH ±3% 100MHz 25 250MHz 280mA 0.52Ω 3.5GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
253
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN24NJ00p24nH ±5% 100MHz 25 250MHz 280mA 0.52Ω 3.5GHz
LQW15AN27NG00p27nH ±2% 100MHz 25 250MHz 280mA 0.52Ω 3.5GHz
LQW15AN27NH00p27nH ±3% 100MHz 25 250MHz 280mA 0.52Ω 3.5GHz
LQW15AN27NJ00p27nH ±5% 100MHz 25 250MHz 280mA 0.52Ω 3.5GHz
LQW15AN30NG00p30nH ±2% 100MHz 25 250MHz 270mA 0.58Ω 3.3GHz
LQW15AN30NH00p30nH ±3% 100MHz 25 250MHz 270mA 0.58Ω 3.3GHz
LQW15AN30NJ00p30nH ±5% 100MHz 25 250MHz 270mA 0.58Ω 3.3GHz
LQW15AN33NG00p33nH ±2% 100MHz 25 250MHz 260mA 0.63Ω 3.2GHz
LQW15AN33NH00p33nH ±3% 100MHz 25 250MHz 260mA 0.63Ω 3.2GHz
LQW15AN33NJ00p33nH ±5% 100MHz 25 250MHz 260mA 0.63Ω 3.2GHz
LQW15AN36NG00p36nH ±2% 100MHz 25 250MHz 260mA 0.63Ω 3.1GHz
LQW15AN36NH00p36nH ±3% 100MHz 25 250MHz 260mA 0.63Ω 3.1GHz
LQW15AN36NJ00p36nH ±5% 100MHz 25 250MHz 260mA 0.63Ω 3.1GHz
LQW15AN39NG00p39nH ±2% 100MHz 25 250MHz 250mA 0.70Ω 3.0GHz
LQW15AN39NH00p39nH ±3% 100MHz 25 250MHz 250mA 0.70Ω 3.0GHz
LQW15AN39NJ00p39nH ±5% 100MHz 25 250MHz 250mA 0.70Ω 3.0GHz
LQW15AN40NG00p40nH ±2% 100MHz 25 250MHz 250mA 0.70Ω 3.0GHz
LQW15AN40NH00p40nH ±3% 100MHz 25 250MHz 250mA 0.70Ω 3.0GHz
LQW15AN40NJ00p40nH ±5% 100MHz 25 250MHz 250mA 0.70Ω 3.0GHz
LQW15AN43NG00p43nH ±2% 100MHz 25 250MHz 250mA 0.70Ω 3.0GHz
LQW15AN43NH00p43nH ±3% 100MHz 25 250MHz 250mA 0.70Ω 3.0GHz
LQW15AN43NJ00p43nH ±5% 100MHz 25 250MHz 250mA 0.70Ω 3.0GHz
LQW15AN47NG00p47nH ±2% 100MHz 25 200MHz 210mA 1.08Ω 2.9GHz
LQW15AN47NH00p47nH ±3% 100MHz 25 200MHz 210mA 1.08Ω 2.9GHz
LQW15AN47NJ00p47nH ±5% 100MHz 25 200MHz 210mA 1.08Ω 2.9GHz
LQW15AN51NG00p51nH ±2% 100MHz 25 200MHz 210mA 1.08Ω 2.85GHz
LQW15AN51NH00p51nH ±3% 100MHz 25 200MHz 210mA 1.08Ω 2.85GHz
LQW15AN51NJ00p51nH ±5% 100MHz 25 200MHz 210mA 1.08Ω 2.85GHz
LQW15AN56NG00p56nH ±2% 100MHz 25 200MHz 200mA 1.17Ω 2.8GHz
LQW15AN56NH00p56nH ±3% 100MHz 25 200MHz 200mA 1.17Ω 2.8GHz
LQW15AN56NJ00p56nH ±5% 100MHz 25 200MHz 200mA 1.17Ω 2.8GHz
LQW15AN62NG00p62nH ±2% 100MHz 20 200MHz 145mA 1.82Ω 2.6GHz
LQW15AN62NH00p62nH ±3% 100MHz 20 200MHz 145mA 1.82Ω 2.6GHz
LQW15AN62NJ00p62nH ±5% 100MHz 20 200MHz 145mA 1.82Ω 2.6GHz
LQW15AN68NG00p68nH ±2% 100MHz 20 200MHz 140mA 1.96Ω 2.5GHz
LQW15AN68NJ00p68nH ±5% 100MHz 20 200MHz 140mA 1.96Ω 2.5GHz
LQW15AN72NG00p72nH ±2% 100MHz 20 150MHz 135mA 2.10Ω 2.5GHz
LQW15AN72NJ00p72nH ±5% 100MHz 20 150MHz 135mA 2.10Ω 2.5GHz
LQW15AN75NG00p75nH ±2% 100MHz 20 150MHz 135mA 2.10Ω 2.4GHz
LQW15AN75NJ00p75nH ±5% 100MHz 20 150MHz 135mA 2.10Ω 2.4GHz
LQW15AN82NG00p82nH ±2% 100MHz 20 150MHz 130mA 2.24Ω 2.3GHz
LQW15AN82NJ00p82nH ±5% 100MHz 20 150MHz 130mA 2.24Ω 2.3GHz
LQW15AN91NG00p91nH ±2% 100MHz 20 150MHz 125mA 2.38Ω 2.1GHz
LQW15AN91NJ00p91nH ±5% 100MHz 20 150MHz 125mA 2.38Ω 2.1GHz
LQW15ANR10J00p100nH ±5% 100MHz 20 150MHz 120mA 2.52Ω 1.5GHz
LQW15ANR12J00p120nH ±5% 100MHz 20 150MHz 110mA 2.66Ω 1.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
254
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
255
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW15AN_10 Series 0402 (1005) inch (mm)
Appearance/Dimensions
(in mm)
0.5±0.1
0.6±0.1
0.5±0.1
1.0±0.1
0.2±0.1 0.2±0.1
0.10±0.05
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN1N3C10p1.3nH ±0.2nH 100MHz 20 250MHz 1200mA 0.017Ω 16GHz
LQW15AN1N3D10p1.3nH ±0.5nH 100MHz 20 250MHz 1200mA 0.017Ω 16GHz
LQW15AN1N4C10p1.4nH ±0.2nH 100MHz 25 250MHz 1100mA 0.019Ω 15GHz
LQW15AN1N4D10p1.4nH ±0.5nH 100MHz 25 250MHz 1100mA 0.019Ω 15GHz
LQW15AN2N2C10p2.2nH ±0.2nH 100MHz 25 250MHz 1000mA 0.027Ω 14GHz
LQW15AN2N2D10p2.2nH ±0.5nH 100MHz 25 250MHz 1000mA 0.027Ω 14GHz
LQW15AN2N3C10p2.3nH ±0.2nH 100MHz 25 250MHz 1000mA 0.027Ω 14GHz
LQW15AN2N3D10p2.3nH ±0.5nH 100MHz 25 250MHz 1000mA 0.027Ω 14GHz
LQW15AN2N4D10p2.4nH ±0.5nH 100MHz 25 250MHz 1000mA 0.027Ω 14GHz
LQW15AN3N3D10p3.3nH ±0.5nH 100MHz 30 250MHz 900mA 0.040Ω 12GHz
LQW15AN3N4C10p3.4nH ±0.2nH 100MHz 30 250MHz 900mA 0.040Ω 12GHz
LQW15AN3N4D10p3.4nH ±0.5nH 100MHz 30 250MHz 900mA 0.040Ω 12GHz
LQW15AN3N5C10p3.5nH ±0.2nH 100MHz 30 250MHz 900mA 0.040Ω 9.5GHz
LQW15AN3N5D10p3.5nH ±0.5nH 100MHz 30 250MHz 900mA 0.040Ω 9.5GHz
LQW15AN3N6C10p3.6nH ±0.2nH 100MHz 30 250MHz 900mA 0.040Ω 9.5GHz
LQW15AN3N6D10p3.6nH ±0.5nH 100MHz 30 250MHz 900mA 0.040Ω 9.5GHz
LQW15AN3N8C10p3.8nH ±0.2nH 100MHz 30 250MHz 900mA 0.040Ω 7GHz
LQW15AN3N8D10p3.8nH ±0.5nH 100MHz 30 250MHz 900mA 0.040Ω 7GHz
LQW15AN3N9D10p3.9nH ±0.5nH 100MHz 30 250MHz 900mA 0.040Ω 7GHz
LQW15AN4N0C10p4.0nH ±0.2nH 100MHz 30 250MHz 800mA 0.051Ω 6.5GHz
LQW15AN4N0D10p4.0nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 6.5GHz
LQW15AN4N2C10p4.2nH ±0.2nH 100MHz 30 250MHz 800mA 0.051Ω 6.5GHz
LQW15AN4N2D10p4.2nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 6.5GHz
LQW15AN4N7D10p4.7nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N1C10p5.1nH ±0.2nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N1D10p5.1nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N2C10p5.2nH ±0.2nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N2D10p5.2nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N3C10p5.3nH ±0.2nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N3D10p5.3nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N4C10p5.4nH ±0.2nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N4D10p5.4nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
256
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN5N5C10p5.5nH ±0.2nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N5D10p5.5nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N6C10p5.6nH ±0.2nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N6D10p5.6nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N7C10p5.7nH ±0.2nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N7D10p5.7nH ±0.5nH 100MHz 30 250MHz 800mA 0.051Ω 8GHz
LQW15AN5N9C10p5.9nH ±0.2nH 100MHz 30 250MHz 760mA 0.056Ω 7.7GHz
LQW15AN5N9D10p5.9nH ±0.5nH 100MHz 30 250MHz 760mA 0.056Ω 7.7GHz
LQW15AN6N0C10p6.0nH ±0.2nH 100MHz 30 250MHz 760mA 0.056Ω 7.7GHz
LQW15AN6N0D10p6.0nH ±0.5nH 100MHz 30 250MHz 760mA 0.056Ω 7.7GHz
LQW15AN6N1C10p6.1nH ±0.2nH 100MHz 30 250MHz 760mA 0.056Ω 7.7GHz
LQW15AN6N1D10p6.1nH ±0.5nH 100MHz 30 250MHz 760mA 0.056Ω 7.7GHz
LQW15AN7N4C10p7.4nH ±0.2nH 100MHz 30 250MHz 750mA 0.058Ω 6.8GHz
LQW15AN7N4D10p7.4nH ±0.5nH 100MHz 30 250MHz 750mA 0.058Ω 6.8GHz
LQW15AN7N6C10p7.6nH ±0.2nH 100MHz 30 250MHz 750mA 0.058Ω 6.8GHz
LQW15AN7N6D10p7.6nH ±0.5nH 100MHz 30 250MHz 750mA 0.058Ω 6.8GHz
LQW15AN7N7C10p7.7nH ±0.2nH 100MHz 30 250MHz 750mA 0.058Ω 6.8GHz
LQW15AN7N7D10p7.7nH ±0.5nH 100MHz 30 250MHz 750mA 0.058Ω 6.8GHz
LQW15AN7N8C10p7.8nH ±0.2nH 100MHz 30 250MHz 750mA 0.058Ω 6.8GHz
LQW15AN7N8D10p7.8nH ±0.5nH 100MHz 30 250MHz 750mA 0.058Ω 6.8GHz
LQW15AN7N9C10p7.9nH ±0.2nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
LQW15AN7N9D10p7.9nH ±0.5nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
LQW15AN8N0C10p8.0nH ±0.2nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
LQW15AN8N0D10p8.0nH ±0.5nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
LQW15AN8N1C10p8.1nH ±0.2nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
LQW15AN8N1D10p8.1nH ±0.5nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
LQW15AN8N3C10p8.3nH ±0.2nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
LQW15AN8N3D10p8.3nH ±0.5nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
LQW15AN8N4C10p8.4nH ±0.2nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
LQW15AN8N4D10p8.4nH ±0.5nH 100MHz 30 250MHz 640mA 0.079Ω 7.5GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
257
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW15AN_80 Series 0402 (1005) inch (mm)
Appearance/Dimensions
1.0±0.1
0.5±0.10.6±0.1
0.1±0.05
0.2±0.1 0.2±0.1
(in mm)
0.6±0.1
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN1N3C80p1.3nH ±0.2nH 100MHz 20 250MHz 3150mA 0.012Ω 18.0GHz
LQW15AN1N3D80p1.3nH ±0.5nH 100MHz 20 250MHz 3150mA 0.012Ω 18.0GHz
LQW15AN1N5C80p1.5nH ±0.2nH 100MHz 20 250MHz 2100mA 0.028Ω 18.0GHz
LQW15AN1N5D80p1.5nH ±0.5nH 100MHz 20 250MHz 2100mA 0.028Ω 18.0GHz
LQW15AN1N6C80p1.6nH ±0.2nH 100MHz 20 250MHz 1450mA 0.045Ω 18.0GHz
LQW15AN1N6D80p1.6nH ±0.5nH 100MHz 20 250MHz 1450mA 0.045Ω 18.0GHz
LQW15AN1N7C80p1.7nH ±0.2nH 100MHz 20 250MHz 1150mA 0.065Ω 18.0GHz
LQW15AN1N7D80p1.7nH ±0.5nH 100MHz 20 250MHz 1150mA 0.065Ω 18.0GHz
LQW15AN2N2B80p2.2nH ±0.1nH 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N2C80p2.2nH ±0.2nH 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N2D80p2.2nH ±0.5nH 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N2G80p2.2nH ±2% 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N3B80p2.3nH ±0.1nH 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N3C80p2.3nH ±0.2nH 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N3D80p2.3nH ±0.5nH 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N3G80p2.3nH ±2% 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N4B80p2.4nH ±0.1nH 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N4C80p2.4nH ±0.2nH 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N4D80p2.4nH ±0.5nH 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N4G80p2.4nH ±2% 100MHz 30 250MHz 2530mA 0.022Ω 15.5GHz
LQW15AN2N5B80p2.5nH ±0.1nH 100MHz 30 250MHz 2100mA 0.030Ω 15.5GHz
LQW15AN2N5C80p2.5nH ±0.2nH 100MHz 30 250MHz 2100mA 0.030Ω 15.5GHz
LQW15AN2N5D80p2.5nH ±0.5nH 100MHz 30 250MHz 2100mA 0.030Ω 15.5GHz
LQW15AN2N5G80p2.5nH ±2% 100MHz 30 250MHz 2100mA 0.030Ω 15.5GHz
LQW15AN2N6B80p2.6nH ±0.1nH 100MHz 30 250MHz 1950mA 0.035Ω 14.5GHz
LQW15AN2N6C80p2.6nH ±0.2nH 100MHz 30 250MHz 1950mA 0.035Ω 14.5GHz
LQW15AN2N6D80p2.6nH ±0.5nH 100MHz 30 250MHz 1950mA 0.035Ω 14.5GHz
LQW15AN2N6G80p2.6nH ±2% 100MHz 30 250MHz 1950mA 0.035Ω 14.5GHz
LQW15AN2N7B80p2.7nH ±0.1nH 100MHz 28 250MHz 1500mA 0.047Ω 14.0GHz
LQW15AN2N7C80p2.7nH ±0.2nH 100MHz 28 250MHz 1500mA 0.047Ω 14.0GHz
LQW15AN2N7D80p2.7nH ±0.5nH 100MHz 28 250MHz 1500mA 0.047Ω 14.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15A_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
258
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN2N7G80p2.7nH ±2% 100MHz 28 250MHz 1500mA 0.047Ω 14.0GHz
LQW15AN2N8B80p2.8nH ±0.1nH 100MHz 27 250MHz 1500mA 0.047Ω 13.5GHz
LQW15AN2N8C80p2.8nH ±0.2nH 100MHz 27 250MHz 1500mA 0.047Ω 13.5GHz
LQW15AN2N8D80p2.8nH ±0.5nH 100MHz 27 250MHz 1500mA 0.047Ω 13.5GHz
LQW15AN2N8G80p2.8nH ±2% 100MHz 27 250MHz 1500mA 0.047Ω 13.5GHz
LQW15AN2N9B80p2.9nH ±0.1nH 100MHz 25 250MHz 1500mA 0.047Ω 12.5GHz
LQW15AN2N9C80p2.9nH ±0.2nH 100MHz 25 250MHz 1500mA 0.047Ω 12.5GHz
LQW15AN2N9D80p2.9nH ±0.5nH 100MHz 25 250MHz 1500mA 0.047Ω 12.5GHz
LQW15AN2N9G80p2.9nH ±2% 100MHz 25 250MHz 1500mA 0.047Ω 12.5GHz
LQW15AN3N0B80p3.0nH ±0.1nH 100MHz 20 250MHz 1350mA 0.063Ω 12.5GHz
LQW15AN3N0C80p3.0nH ±0.2nH 100MHz 20 250MHz 1350mA 0.063Ω 12.5GHz
LQW15AN3N0D80p3.0nH ±0.5nH 100MHz 20 250MHz 1350mA 0.063Ω 12.5GHz
LQW15AN3N0G80p3.0nH ±2% 100MHz 20 250MHz 1350mA 0.063Ω 12.5GHz
LQW15AN3N3B80p3.3nH ±0.1nH 100MHz 30 250MHz 2000mA 0.030Ω 14.0GHz
LQW15AN3N3C80p3.3nH ±0.2nH 100MHz 30 250MHz 2000mA 0.030Ω 14.0GHz
LQW15AN3N3D80p3.3nH ±0.5nH 100MHz 30 250MHz 2000mA 0.030Ω 14.0GHz
LQW15AN3N3G80p3.3nH ±2% 100MHz 30 250MHz 2000mA 0.030Ω 14.0GHz
LQW15AN3N4B80p3.4nH ±0.1nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N4C80p3.4nH ±0.2nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N4D80p3.4nH ±0.5nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N4G80p3.4nH ±2% 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N5B80p3.5nH ±0.1nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N5C80p3.5nH ±0.2nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N5D80p3.5nH ±0.5nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N5G80p3.5nH ±2% 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N6B80p3.6nH ±0.1nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N6C80p3.6nH ±0.2nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N6D80p3.6nH ±0.5nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N6G80p3.6nH ±2% 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N7B80p3.7nH ±0.1nH 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N7C80p3.7nH ±0.2nH 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N7D80p3.7nH ±0.5nH 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N7G80p3.7nH ±2% 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N8B80p3.8nH ±0.1nH 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N8C80p3.8nH ±0.2nH 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N8D80p3.8nH ±0.5nH 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N8G80p3.8nH ±2% 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N9B80p3.9nH ±0.1nH 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N9C80p3.9nH ±0.2nH 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N9D80p3.9nH ±0.5nH 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN3N9G80p3.9nH ±2% 100MHz 35 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN4N0B80p4.0nH ±0.1nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN4N0C80p4.0nH ±0.2nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN4N0D80p4.0nH ±0.5nH 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN4N0G80p4.0nH ±2% 100MHz 30 250MHz 1950mA 0.030Ω 10.0GHz
LQW15AN4N1B80p4.1nH ±0.1nH 100MHz 30 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N1C80p4.1nH ±0.2nH 100MHz 30 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N1D80p4.1nH ±0.5nH 100MHz 30 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N1G80p4.1nH ±2% 100MHz 30 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N2B80p4.2nH ±0.1nH 100MHz 30 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N2C80p4.2nH ±0.2nH 100MHz 30 250MHz 1800mA 0.044Ω 9.6GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15A_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
259
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN4N2D80p4.2nH ±0.5nH 100MHz 30 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N2G80p4.2nH ±2% 100MHz 30 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N3B80p4.3nH ±0.1nH 100MHz 32 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N3C80p4.3nH ±0.2nH 100MHz 32 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N3D80p4.3nH ±0.5nH 100MHz 32 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N3G80p4.3nH ±2% 100MHz 32 250MHz 1800mA 0.044Ω 9.6GHz
LQW15AN4N4B80p4.4nH ±0.1nH 100MHz 34 250MHz 1600mA 0.052Ω 9.6GHz
LQW15AN4N4C80p4.4nH ±0.2nH 100MHz 34 250MHz 1600mA 0.052Ω 9.6GHz
LQW15AN4N4D80p4.4nH ±0.5nH 100MHz 34 250MHz 1600mA 0.052Ω 9.6GHz
LQW15AN4N4G80p4.4nH ±2% 100MHz 34 250MHz 1600mA 0.052Ω 9.6GHz
LQW15AN4N5B80p4.5nH ±0.1nH 100MHz 34 250MHz 1450mA 0.060Ω 9.6GHz
LQW15AN4N5C80p4.5nH ±0.2nH 100MHz 34 250MHz 1450mA 0.060Ω 9.6GHz
LQW15AN4N5D80p4.5nH ±0.5nH 100MHz 34 250MHz 1450mA 0.060Ω 9.6GHz
LQW15AN4N5G80p4.5nH ±2% 100MHz 34 250MHz 1450mA 0.060Ω 9.6GHz
LQW15AN4N6B80p4.6nH ±0.1nH 100MHz 32 250MHz 1450mA 0.060Ω 9.6GHz
LQW15AN4N6C80p4.6nH ±0.2nH 100MHz 32 250MHz 1450mA 0.060Ω 9.6GHz
LQW15AN4N6D80p4.6nH ±0.5nH 100MHz 32 250MHz 1450mA 0.060Ω 9.6GHz
LQW15AN4N6G80p4.6nH ±2% 100MHz 32 250MHz 1450mA 0.060Ω 9.6GHz
LQW15AN4N7B80p4.7nH ±0.1nH 100MHz 31 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N7C80p4.7nH ±0.2nH 100MHz 31 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N7D80p4.7nH ±0.5nH 100MHz 31 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N7G80p4.7nH ±2% 100MHz 31 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N8B80p4.8nH ±0.1nH 100MHz 30 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N8C80p4.8nH ±0.2nH 100MHz 30 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N8D80p4.8nH ±0.5nH 100MHz 30 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N8G80p4.8nH ±2% 100MHz 30 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N9B80p4.9nH ±0.1nH 100MHz 27 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N9C80p4.9nH ±0.2nH 100MHz 27 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N9D80p4.9nH ±0.5nH 100MHz 27 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN4N9G80p4.9nH ±2% 100MHz 27 250MHz 1200mA 0.071Ω 8.0GHz
LQW15AN5N0B80p5.0nH ±0.1nH 100MHz 32 250MHz 1770mA 0.040Ω 10.0GHz
LQW15AN5N0C80p5.0nH ±0.2nH 100MHz 32 250MHz 1770mA 0.040Ω 10.0GHz
LQW15AN5N0D80p5.0nH ±0.5nH 100MHz 32 250MHz 1770mA 0.040Ω 10.0GHz
LQW15AN5N0G80p5.0nH ±2% 100MHz 32 250MHz 1770mA 0.040Ω 10.0GHz
LQW15AN5N1B80p5.1nH ±0.1nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N1C80p5.1nH ±0.2nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N1D80p5.1nH ±0.5nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N1G80p5.1nH ±2% 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N2B80p5.2nH ±0.1nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N2C80p5.2nH ±0.2nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N2D80p5.2nH ±0.5nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N2G80p5.2nH ±2% 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N3B80p5.3nH ±0.1nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N3C80p5.3nH ±0.2nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N3D80p5.3nH ±0.5nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N3G80p5.3nH ±2% 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N4B80p5.4nH ±0.1nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N4C80p5.4nH ±0.2nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N4D80p5.4nH ±0.5nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N4G80p5.4nH ±2% 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N5B80p5.5nH ±0.1nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15A_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
260
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN5N5C80p5.5nH ±0.2nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N5D80p5.5nH ±0.5nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N5G80p5.5nH ±2% 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N6B80p5.6nH ±0.1nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N6C80p5.6nH ±0.2nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N6D80p5.6nH ±0.5nH 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N6G80p5.6nH ±2% 100MHz 35 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N7B80p5.7nH ±0.1nH 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N7C80p5.7nH ±0.2nH 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N7D80p5.7nH ±0.5nH 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N7G80p5.7nH ±2% 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N8B80p5.8nH ±0.1nH 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N8C80p5.8nH ±0.2nH 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N8D80p5.8nH ±0.5nH 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N8G80p5.8nH ±2% 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N9B80p5.9nH ±0.1nH 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N9C80p5.9nH ±0.2nH 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N9D80p5.9nH ±0.5nH 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN5N9G80p5.9nH ±2% 100MHz 30 250MHz 1770mA 0.040Ω 8.0GHz
LQW15AN6N0B80p6.0nH ±0.1nH 100MHz 32 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N0C80p6.0nH ±0.2nH 100MHz 32 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N0D80p6.0nH ±0.5nH 100MHz 32 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N0G80p6.0nH ±2% 100MHz 32 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N1B80p6.1nH ±0.1nH 100MHz 32 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N1C80p6.1nH ±0.2nH 100MHz 32 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N1D80p6.1nH ±0.5nH 100MHz 32 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N1G80p6.1nH ±2% 100MHz 32 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N2B80p6.2nH ±0.1nH 100MHz 33 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N2C80p6.2nH ±0.2nH 100MHz 33 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N2D80p6.2nH ±0.5nH 100MHz 33 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N2G80p6.2nH ±2% 100MHz 33 250MHz 1600mA 0.056Ω 8.0GHz
LQW15AN6N3G80p6.3nH ±2% 100MHz 32 250MHz 1600mA 0.057Ω 7.8GHz
LQW15AN6N3J80p6.3nH ±5% 100MHz 32 250MHz 1600mA 0.057Ω 7.8GHz
LQW15AN6N4G80p6.4nH ±2% 100MHz 33 250MHz 1380mA 0.065Ω 7.0GHz
LQW15AN6N4J80p6.4nH ±5% 100MHz 33 250MHz 1380mA 0.065Ω 7.0GHz
LQW15AN6N5G80p6.5nH ±2% 100MHz 32 250MHz 1380mA 0.065Ω 7.0GHz
LQW15AN6N5J80p6.5nH ±5% 100MHz 32 250MHz 1380mA 0.065Ω 7.0GHz
LQW15AN6N6G80p6.6nH ±2% 100MHz 30 250MHz 1280mA 0.078Ω 7.0GHz
LQW15AN6N6J80p6.6nH ±5% 100MHz 30 250MHz 1280mA 0.078Ω 7.0GHz
LQW15AN6N7G80p6.7nH ±2% 100MHz 30 250MHz 1280mA 0.078Ω 7.0GHz
LQW15AN6N7J80p6.7nH ±5% 100MHz 30 250MHz 1280mA 0.078Ω 7.0GHz
LQW15AN6N8G80p6.8nH ±2% 100MHz 30 250MHz 1450mA 0.068Ω 7.0GHz
LQW15AN6N8J80p6.8nH ±5% 100MHz 30 250MHz 1450mA 0.068Ω 7.0GHz
LQW15AN6N9G80p6.9nH ±2% 100MHz 32 250MHz 1420mA 0.069Ω 8.5GHz
LQW15AN6N9J80p6.9nH ±5% 100MHz 32 250MHz 1420mA 0.069Ω 8.5GHz
LQW15AN7N0G80p7.0nH ±2% 100MHz 33 250MHz 1420mA 0.069Ω 8.0GHz
LQW15AN7N0J80p7.0nH ±5% 100MHz 33 250MHz 1420mA 0.069Ω 8.0GHz
LQW15AN7N1G80p7.1nH ±2% 100MHz 32 250MHz 1420mA 0.069Ω 7.0GHz
LQW15AN7N1J80p7.1nH ±5% 100MHz 32 250MHz 1420mA 0.069Ω 7.0GHz
LQW15AN7N2G80p7.2nH ±2% 100MHz 32 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N2J80p7.2nH ±5% 100MHz 32 250MHz 1700mA 0.050Ω 7.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15A_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
261
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN7N3G80p7.3nH ±2% 100MHz 32 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N3J80p7.3nH ±5% 100MHz 32 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N4G80p7.4nH ±2% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N4J80p7.4nH ±5% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N5G80p7.5nH ±2% 100MHz 35 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N5J80p7.5nH ±5% 100MHz 35 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N6G80p7.6nH ±2% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N6J80p7.6nH ±5% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N7G80p7.7nH ±2% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N7J80p7.7nH ±5% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N8G80p7.8nH ±2% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N8J80p7.8nH ±5% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N9G80p7.9nH ±2% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN7N9J80p7.9nH ±5% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN8N0G80p8.0nH ±2% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN8N0J80p8.0nH ±5% 100MHz 30 250MHz 1700mA 0.050Ω 7.0GHz
LQW15AN8N1G80p8.1nH ±2% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N1J80p8.1nH ±5% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N2G80p8.2nH ±2% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N2J80p8.2nH ±5% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N3G80p8.3nH ±2% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N3J80p8.3nH ±5% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N4G80p8.4nH ±2% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N4J80p8.4nH ±5% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N5G80p8.5nH ±2% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N5J80p8.5nH ±5% 100MHz 32 250MHz 1500mA 0.069Ω 6.5GHz
LQW15AN8N6G80p8.6nH ±2% 100MHz 31 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN8N6J80p8.6nH ±5% 100MHz 31 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN8N7G80p8.7nH ±2% 100MHz 31 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN8N7J80p8.7nH ±5% 100MHz 31 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN8N8G80p8.8nH ±2% 100MHz 31 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN8N8J80p8.8nH ±5% 100MHz 31 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN8N9G80p8.9nH ±2% 100MHz 31 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN8N9J80p8.9nH ±5% 100MHz 31 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN9N0G80p9.0nH ±2% 100MHz 30 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN9N0J80p9.0nH ±5% 100MHz 30 250MHz 1420mA 0.070Ω 6.5GHz
LQW15AN9N1G80p9.1nH ±2% 100MHz 32 250MHz 1400mA 0.080Ω 6.5GHz
LQW15AN9N1J80p9.1nH ±5% 100MHz 32 250MHz 1400mA 0.080Ω 6.5GHz
LQW15AN9N2G80p9.2nH ±2% 100MHz 32 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N2J80p9.2nH ±5% 100MHz 32 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N3G80p9.3nH ±2% 100MHz 34 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N3J80p9.3nH ±5% 100MHz 34 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N4G80p9.4nH ±2% 100MHz 33 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N4J80p9.4nH ±5% 100MHz 33 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N5G80p9.5nH ±2% 100MHz 32 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N5J80p9.5nH ±5% 100MHz 32 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N6G80p9.6nH ±2% 100MHz 33 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N6J80p9.6nH ±5% 100MHz 33 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N7G80p9.7nH ±2% 100MHz 33 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N7J80p9.7nH ±5% 100MHz 33 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N8G80p9.8nH ±2% 100MHz 34 250MHz 1400mA 0.081Ω 6.0GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15A_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
262
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN9N8J80p9.8nH ±5% 100MHz 34 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N9G80p9.9nH ±2% 100MHz 32 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN9N9J80p9.9nH ±5% 100MHz 32 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN10NG80p10nH ±2% 100MHz 31 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN10NJ80p10nH ±5% 100MHz 31 250MHz 1400mA 0.081Ω 6.0GHz
LQW15AN11NG80p11nH ±2% 100MHz 32 250MHz 1400mA 0.083Ω 6.2GHz
LQW15AN11NJ80p11nH ±5% 100MHz 32 250MHz 1400mA 0.083Ω 6.2GHz
LQW15AN12NG80p12nH ±2% 100MHz 30 250MHz 1240mA 0.093Ω 5.2GHz
LQW15AN12NJ80p12nH ±5% 100MHz 30 250MHz 1240mA 0.093Ω 5.2GHz
LQW15AN13NG80p13nH ±2% 100MHz 30 250MHz 1240mA 0.093Ω 5.2GHz
LQW15AN13NJ80p13nH ±5% 100MHz 30 250MHz 1240mA 0.093Ω 5.2GHz
LQW15AN14NG80p14nH ±2% 100MHz 31 250MHz 1150mA 0.111Ω 5.2GHz
LQW15AN14NJ80p14nH ±5% 100MHz 31 250MHz 1150mA 0.111Ω 5.2GHz
LQW15AN15NG80p15nH ±2% 100MHz 31 250MHz 1150mA 0.114Ω 5.5GHz
LQW15AN15NJ80p15nH ±5% 100MHz 31 250MHz 1150mA 0.114Ω 5.5GHz
LQW15AN16NG80p16nH ±2% 100MHz 31 250MHz 1000mA 0.126Ω 5.0GHz
LQW15AN16NJ80p16nH ±5% 100MHz 31 250MHz 1000mA 0.126Ω 5.0GHz
LQW15AN17NG80p17nH ±2% 100MHz 30 250MHz 1000mA 0.126Ω 5.0GHz
LQW15AN17NJ80p17nH ±5% 100MHz 30 250MHz 1000mA 0.126Ω 5.0GHz
LQW15AN18NG80p18nH ±2% 100MHz 30 250MHz 1050mA 0.130Ω 5.2GHz
LQW15AN18NJ80p18nH ±5% 100MHz 30 250MHz 1050mA 0.130Ω 5.2GHz
LQW15AN19NG80p19nH ±2% 100MHz 30 250MHz 920mA 0.156Ω 5.0GHz
LQW15AN19NJ80p19nH ±5% 100MHz 30 250MHz 920mA 0.156Ω 5.0GHz
LQW15AN20NG80p20nH ±2% 100MHz 30 250MHz 800mA 0.186Ω 4.5GHz
LQW15AN20NJ80p20nH ±5% 100MHz 30 250MHz 800mA 0.186Ω 4.5GHz
LQW15AN21NG80p21nH ±2% 100MHz 30 250MHz 780mA 0.202Ω 4.5GHz
LQW15AN21NJ80p21nH ±5% 100MHz 30 250MHz 780mA 0.202Ω 4.5GHz
LQW15AN22NG80p22nH ±2% 100MHz 30 250MHz 780mA 0.202Ω 4.5GHz
LQW15AN22NJ80p22nH ±5% 100MHz 30 250MHz 780mA 0.202Ω 4.5GHz
LQW15AN23NG80p23nH ±2% 100MHz 29 250MHz 760mA 0.201Ω 4.5GHz
LQW15AN23NJ80p23nH ±5% 100MHz 29 250MHz 760mA 0.201Ω 4.5GHz
LQW15AN24NG80p24nH ±2% 100MHz 31 250MHz 770mA 0.212Ω 4.0GHz
LQW15AN24NJ80p24nH ±5% 100MHz 31 250MHz 770mA 0.212Ω 4.0GHz
LQW15AN25NG80p25nH ±2% 100MHz 31 250MHz 750mA 0.221Ω 4.1GHz
LQW15AN25NJ80p25nH ±5% 100MHz 31 250MHz 750mA 0.221Ω 4.1GHz
LQW15AN26NG80p26nH ±2% 100MHz 29 250MHz 720mA 0.282Ω 4.1GHz
LQW15AN26NJ80p26nH ±5% 100MHz 29 250MHz 720mA 0.282Ω 4.1GHz
LQW15AN27NG80p27nH ±2% 100MHz 30 250MHz 680mA 0.288Ω 4.0GHz
LQW15AN27NJ80p27nH ±5% 100MHz 30 250MHz 680mA 0.288Ω 4.0GHz
LQW15AN30NG80p30nH ±2% 100MHz 30 250MHz 660mA 0.309Ω 3.8GHz
LQW15AN30NJ80p30nH ±5% 100MHz 30 250MHz 660mA 0.309Ω 3.8GHz
LQW15AN33NG80p33nH ±2% 100MHz 30 250MHz 620mA 0.336Ω 3.6GHz
LQW15AN33NJ80p33nH ±5% 100MHz 30 250MHz 620mA 0.336Ω 3.6GHz
LQW15AN36NG80p36nH ±2% 100MHz 30 250MHz 540mA 0.431Ω 3.5GHz
LQW15AN36NJ80p36nH ±5% 100MHz 30 250MHz 540mA 0.431Ω 3.5GHz
LQW15AN39NG80p39nH ±2% 100MHz 28 250MHz 530mA 0.456Ω 3.4GHz
LQW15AN39NJ80p39nH ±5% 100MHz 28 250MHz 530mA 0.456Ω 3.4GHz
LQW15AN43NG80p43nH ±2% 100MHz 30 250MHz 515mA 0.516Ω 3.4GHz
LQW15AN43NJ80p43nH ±5% 100MHz 30 250MHz 515mA 0.516Ω 3.4GHz
LQW15AN47NG80p47nH ±2% 100MHz 25 200MHz 440mA 0.648Ω 3.2GHz
LQW15AN47NJ80p47nH ±5% 100MHz 25 200MHz 440mA 0.648Ω 3.2GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15A_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
263
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW15AN51NG80p51nH ±2% 100MHz 25 200MHz 415mA 0.696Ω 2.9GHz
LQW15AN51NJ80p51nH ±5% 100MHz 25 200MHz 415mA 0.696Ω 2.9GHz
LQW15AN53NG80p53nH ±2% 100MHz 25 200MHz 415mA 0.696Ω 2.9GHz
LQW15AN53NJ80p53nH ±5% 100MHz 25 200MHz 415mA 0.696Ω 2.9GHz
LQW15AN56NG80p56nH ±2% 100MHz 25 200MHz 340mA 0.996Ω 2.9GHz
LQW15AN56NJ80p56nH ±5% 100MHz 25 200MHz 340mA 0.996Ω 2.9GHz
LQW15AN68NG80p68nH ±2% 100MHz 25 200MHz 320mA 1.128Ω 2.5GHz
LQW15AN68NJ80p68nH ±5% 100MHz 25 200MHz 320mA 1.128Ω 2.5GHz
LQW15AN75NG80p75nH ±2% 100MHz 25 200MHz 320mA 1.224Ω 2.4GHz
LQW15AN75NJ80p75nH ±5% 100MHz 25 200MHz 320mA 1.224Ω 2.4GHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW15A_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQW15AN_8p series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
100
50
0
125850
Current Derating (%)
Operating Temperature (°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
264
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW18AN_00 Series 0603 (1608) inch (mm)
Appearance/Dimensions
1.6±0.2
*1 0.8±0.2
0.80±0.15
(in mm)
0.8±0.2
0.2±0.1
0.3±0.1 0.3±0.1
*1 LQW18AN_1p/
LQW18AS: 0.8±0.3
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18AN2N2D00p2.2nH ±0.5nH 100MHz 16 250MHz 700mA 0.042Ω 6000MHz
LQW18AN3N6C00p3.6nH ±0.2nH 100MHz 25 250MHz 850mA 0.059Ω 6000MHz
LQW18AN3N6D00p3.6nH ±0.5nH 100MHz 25 250MHz 850mA 0.059Ω 6000MHz
LQW18AN3N9C00p3.9nH ±0.2nH 100MHz 35 250MHz 850mA 0.059Ω 6000MHz
LQW18AN3N9D00p3.9nH ±0.5nH 100MHz 35 250MHz 850mA 0.059Ω 6000MHz
LQW18AN4N3C00p4.3nH ±0.2nH 100MHz 35 250MHz 850mA 0.059Ω 6000MHz
LQW18AN4N3D00p4.3nH ±0.5nH 100MHz 35 250MHz 850mA 0.059Ω 6000MHz
LQW18AN4N7D00p4.7nH ±0.5nH 100MHz 35 250MHz 850mA 0.059Ω 6000MHz
LQW18AN5N6C00p5.6nH ±0.2nH 100MHz 35 250MHz 750mA 0.082Ω 6000MHz
LQW18AN5N6D00p5.6nH ±0.5nH 100MHz 35 250MHz 750mA 0.082Ω 6000MHz
LQW18AN6N2C00p6.2nH ±0.2nH 100MHz 35 250MHz 750mA 0.082Ω 6000MHz
LQW18AN6N2D00p6.2nH ±0.5nH 100MHz 35 250MHz 750mA 0.082Ω 6000MHz
LQW18AN6N8C00p6.8nH ±0.2nH 100MHz 35 250MHz 750mA 0.082Ω 6000MHz
LQW18AN6N8D00p6.8nH ±0.5nH 100MHz 35 250MHz 750mA 0.082Ω 6000MHz
LQW18AN7N5C00p7.5nH ±0.2nH 100MHz 35 250MHz 750mA 0.082Ω 6000MHz
LQW18AN7N5D00p7.5nH ±0.5nH 100MHz 35 250MHz 750mA 0.082Ω 6000MHz
LQW18AN8N2C00p8.2nH ±0.2nH 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN8N2D00p8.2nH ±0.5nH 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN8N7C00p8.7nH ±0.2nH 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN8N7D00p8.7nH ±0.5nH 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN9N1C00p9.1nH ±0.2nH 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN9N1D00p9.1nH ±0.5nH 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN9N5D00p9.5nH ±0.5nH 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN10NG00p10nH ±2% 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN10NJ00p10nH ±5% 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN11NG00p11nH ±2% 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN11NJ00p11nH ±5% 100MHz 35 250MHz 650mA 0.11Ω 6000MHz
LQW18AN12NG00p12nH ±2% 100MHz 35 250MHz 600mA 0.13Ω 6000MHz
LQW18AN12NJ00p12nH ±5% 100MHz 35 250MHz 600mA 0.13Ω 6000MHz
LQW18AN13NG00p13nH ±2% 100MHz 35 250MHz 600mA 0.13Ω 6000MHz
LQW18AN13NJ00p13nH ±5% 100MHz 35 250MHz 600mA 0.13Ω 6000MHz
LQW18AN15NG00p15nH ±2% 100MHz 40 250MHz 600mA 0.13Ω 6000MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
265
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18AN15NJ00p15nH ±5% 100MHz 40 250MHz 600mA 0.13Ω 6000MHz
LQW18AN16NG00p16nH ±2% 100MHz 40 250MHz 550mA 0.16Ω 5500MHz
LQW18AN16NJ00p16nH ±5% 100MHz 40 250MHz 550mA 0.16Ω 5500MHz
LQW18AN18NG00p18nH ±2% 100MHz 40 250MHz 550mA 0.16Ω 5500MHz
LQW18AN18NJ00p18nH ±5% 100MHz 40 250MHz 550mA 0.16Ω 5500MHz
LQW18AN20NG00p20nH ±2% 100MHz 40 250MHz 550mA 0.16Ω 4900MHz
LQW18AN20NJ00p20nH ±5% 100MHz 40 250MHz 550mA 0.16Ω 4900MHz
LQW18AN22NG00p22nH ±2% 100MHz 40 250MHz 500mA 0.17Ω 4600MHz
LQW18AN22NJ00p22nH ±5% 100MHz 40 250MHz 500mA 0.17Ω 4600MHz
LQW18AN24NG00p24nH ±2% 100MHz 40 250MHz 500mA 0.21Ω 3800MHz
LQW18AN24NJ00p24nH ±5% 100MHz 40 250MHz 500mA 0.21Ω 3800MHz
LQW18AN27NG00p27nH ±2% 100MHz 40 250MHz 440mA 0.21Ω 3700MHz
LQW18AN27NJ00p27nH ±5% 100MHz 40 250MHz 440mA 0.21Ω 3700MHz
LQW18AN30NG00p30nH ±2% 100MHz 40 250MHz 420mA 0.23Ω 3300MHz
LQW18AN30NJ00p30nH ±5% 100MHz 40 250MHz 420mA 0.23Ω 3300MHz
LQW18AN33NG00p33nH ±2% 100MHz 40 250MHz 420mA 0.23Ω 3200MHz
LQW18AN33NJ00p33nH ±5% 100MHz 40 250MHz 420mA 0.23Ω 3200MHz
LQW18AN36NG00p36nH ±2% 100MHz 40 250MHz 400mA 0.26Ω 2900MHz
LQW18AN36NJ00p36nH ±5% 100MHz 40 250MHz 400mA 0.26Ω 2900MHz
LQW18AN39NG00p39nH ±2% 100MHz 40 250MHz 400mA 0.26Ω 2800MHz
LQW18AN39NJ00p39nH ±5% 100MHz 40 250MHz 400mA 0.26Ω 2800MHz
LQW18AN43NG00p43nH ±2% 100MHz 40 200MHz 380mA 0.29Ω 2700MHz
LQW18AN43NJ00p43nH ±5% 100MHz 40 200MHz 380mA 0.29Ω 2700MHz
LQW18AN47NG00p47nH ±2% 100MHz 38 200MHz 380mA 0.29Ω 2600MHz
LQW18AN47NJ00p47nH ±5% 100MHz 38 200MHz 380mA 0.29Ω 2600MHz
LQW18AN51NG00p51nH ±2% 100MHz 38 200MHz 370mA 0.33Ω 2500MHz
LQW18AN51NJ00p51nH ±5% 100MHz 38 200MHz 370mA 0.33Ω 2500MHz
LQW18AN56NG00p56nH ±2% 100MHz 38 200MHz 360mA 0.35Ω 2400MHz
LQW18AN56NJ00p56nH ±5% 100MHz 38 200MHz 360mA 0.35Ω 2400MHz
LQW18AN62NG00p62nH ±2% 100MHz 38 200MHz 280mA 0.51Ω 2300MHz
LQW18AN62NJ00p62nH ±5% 100MHz 38 200MHz 280mA 0.51Ω 2300MHz
LQW18AN68NG00p68nH ±2% 100MHz 38 200MHz 340mA 0.38Ω 2200MHz
LQW18AN68NJ00p68nH ±5% 100MHz 38 200MHz 340mA 0.38Ω 2200MHz
LQW18AN72NG00p72nH ±2% 100MHz 34 150MHz 270mA 0.56Ω 2100MHz
LQW18AN72NJ00p72nH ±5% 100MHz 34 150MHz 270mA 0.56Ω 2100MHz
LQW18AN75NG00p75nH ±2% 100MHz 34 150MHz 270mA 0.56Ω 2050MHz
LQW18AN75NJ00p75nH ±5% 100MHz 34 150MHz 270mA 0.56Ω 2050MHz
LQW18AN82NG00p82nH ±2% 100MHz 34 150MHz 250mA 0.60Ω 2000MHz
LQW18AN82NJ00p82nH ±5% 100MHz 34 150MHz 250mA 0.60Ω 2000MHz
LQW18AN91NG00p91nH ±2% 100MHz 34 150MHz 230mA 0.64Ω 1900MHz
LQW18AN91NJ00p91nH ±5% 100MHz 34 150MHz 230mA 0.64Ω 1900MHz
LQW18ANR10G00p100nH ±2% 100MHz 34 150MHz 220mA 0.68Ω 1800MHz
LQW18ANR10J00p100nH ±5% 100MHz 34 150MHz 220mA 0.68Ω 1800MHz
LQW18ANR11G00p110nH ±2% 100MHz 32 150MHz 200mA 1.2Ω 1700MHz
LQW18ANR11J00p110nH ±5% 100MHz 32 150MHz 200mA 1.2Ω 1700MHz
LQW18ANR12G00p120nH ±2% 100MHz 32 150MHz 180mA 1.3Ω 1600MHz
LQW18ANR12J00p120nH ±5% 100MHz 32 150MHz 180mA 1.3Ω 1600MHz
LQW18ANR13G00p130nH ±2% 100MHz 32 150MHz 170mA 1.4Ω 1450MHz
LQW18ANR13J00p130nH ±5% 100MHz 32 150MHz 170mA 1.4Ω 1450MHz
LQW18ANR15G00p150nH ±2% 100MHz 32 150MHz 160mA 1.5Ω 1400MHz
LQW18ANR15J00p150nH ±5% 100MHz 32 150MHz 160mA 1.5Ω 1400MHz
LQW18ANR16G00p160nH ±2% 100MHz 32 150MHz 150mA 2.1Ω 1350MHz
LQW18ANR16J00p160nH ±5% 100MHz 32 150MHz 150mA 2.1Ω 1350MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
266
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18ANR18G00p180nH ±2% 100MHz 25 100MHz 140mA 2.2Ω 1300MHz
LQW18ANR18J00p180nH ±5% 100MHz 25 100MHz 140mA 2.2Ω 1300MHz
LQW18ANR20G00p200nH ±2% 100MHz 25 100MHz 120mA 2.4Ω 1250MHz
LQW18ANR20J00p200nH ±5% 100MHz 25 100MHz 120mA 2.4Ω 1250MHz
LQW18ANR22G00p220nH ±2% 100MHz 25 100MHz 120mA 2.5Ω 1200MHz
LQW18ANR22J00p220nH ±5% 100MHz 25 100MHz 120mA 2.5Ω 1200MHz
LQW18ANR27G00p270nH ±2% 100MHz 30 100MHz 110mA 3.4Ω 960MHz
LQW18ANR27J00p270nH ±5% 100MHz 30 100MHz 110mA 3.4Ω 960MHz
LQW18ANR33G00p330nH ±2% 100MHz 30 100MHz 85mA 5.5Ω 800MHz
LQW18ANR33J00p330nH ±5% 100MHz 30 100MHz 85mA 5.5Ω 800MHz
LQW18ANR39G00p390nH ±2% 100MHz 30 100MHz 80mA 6.2Ω 800MHz
LQW18ANR39J00p390nH ±5% 100MHz 30 100MHz 80mA 6.2Ω 800MHz
LQW18ANR47G00p470nH ±2% 100MHz 30 100MHz 75mA 7.0Ω 700MHz
LQW18ANR47J00p470nH ±5% 100MHz 30 100MHz 75mA 7.0Ω 700MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
267
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW18AN_10 Series 0603 (1608) inch (mm)
Appearance/Dimensions
1.6±0.2
*1 0.8±0.2
0.80±0.15
(in mm)
0.8±0.2
0.2±0.1
0.3±0.1 0.3±0.1
*1 LQW18AN_1p/
LQW18AS: 0.8±0.3
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18AN2N2D10p2.2nH ±0.5nH 100MHz 25 250MHz 1400mA 0.018Ω 18000MHz
LQW18AN3N9C10p3.9nH ±0.2nH 100MHz 38 250MHz 1000mA 0.032Ω 11000MHz
LQW18AN3N9D10p3.9nH ±0.5nH 100MHz 38 250MHz 1000mA 0.032Ω 11000MHz
LQW18AN5N6D10p5.6nH ±0.5nH 100MHz 38 250MHz 900mA 0.045Ω 10000MHz
LQW18AN6N8C10p6.8nH ±0.2nH 100MHz 38 250MHz 900mA 0.045Ω 7000MHz
LQW18AN6N8D10p6.8nH ±0.5nH 100MHz 38 250MHz 900mA 0.045Ω 7000MHz
LQW18AN8N2D10p8.2nH ±0.5nH 100MHz 38 250MHz 800mA 0.058Ω 7000MHz
LQW18AN10NG10p10nH ±2% 100MHz 38 250MHz 800mA 0.058Ω 5000MHz
LQW18AN10NJ10p10nH ±5% 100MHz 38 250MHz 800mA 0.058Ω 5000MHz
LQW18AN12NG10p12nH ±2% 100MHz 38 250MHz 750mA 0.071Ω 5000MHz
LQW18AN12NJ10p12nH ±5% 100MHz 38 250MHz 750mA 0.071Ω 5000MHz
LQW18AN15NJ10p15nH ±5% 100MHz 42 250MHz 700mA 0.085Ω 4500MHz
LQW18AN18NG10p18nH ±2% 100MHz 42 250MHz 700mA 0.085Ω 3500MHz
LQW18AN18NJ10p18nH ±5% 100MHz 42 250MHz 700mA 0.085Ω 3500MHz
LQW18AN22NG10p22nH ±2% 100MHz 42 250MHz 640mA 0.099Ω 3200MHz
LQW18AN22NJ10p22nH ±5% 100MHz 42 250MHz 640mA 0.099Ω 3200MHz
LQW18AN27NG10p27nH ±2% 100MHz 42 250MHz 590mA 0.116Ω 2800MHz
LQW18AN27NJ10p27nH ±5% 100MHz 42 250MHz 590mA 0.116Ω 2800MHz
LQW18AN33NJ10p33nH ±5% 100MHz 42 250MHz 550mA 0.132Ω 2500MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
268
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
269
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW18AN_80 Series 0603 (1608) inch (mm)
Appearance/Dimensions
1.65±0.1
0.26±0.1
0.2±0.1
0.9±0.10.99±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18AN2N2C80p2.2nH ±0.2nH 100MHz 24 250MHz 3200mA 0.018Ω 15000MHz
LQW18AN2N4C80p2.4nH ±0.2nH 100MHz 18 250MHz 2400mA 0.026Ω 15000MHz
LQW18AN3N0C80p3.0nH ±0.2nH 100MHz 13 250MHz 670mA 0.17Ω 15000MHz
LQW18AN3N9B80p3.9nH ±0.1nH 100MHz 30 250MHz 2200mA 0.028Ω 10000MHz
LQW18AN3N9C80p3.9nH ±0.2nH 100MHz 30 250MHz 2200mA 0.028Ω 10000MHz
LQW18AN3N9G80p3.9nH ±2% 100MHz 30 250MHz 2200mA 0.028Ω 10000MHz
LQW18AN4N1B80p4.1nH ±0.1nH 100MHz 30 250MHz 2200mA 0.028Ω 10000MHz
LQW18AN4N1C80p4.1nH ±0.2nH 100MHz 30 250MHz 2200mA 0.028Ω 10000MHz
LQW18AN4N1G80p4.1nH ±2% 100MHz 30 250MHz 2200mA 0.028Ω 10000MHz
LQW18AN4N2B80p4.2nH ±0.1nH 100MHz 30 250MHz 2200mA 0.028Ω 10000MHz
LQW18AN4N2C80p4.2nH ±0.2nH 100MHz 30 250MHz 2200mA 0.028Ω 10000MHz
LQW18AN4N2G80p4.2nH ±2% 100MHz 30 250MHz 2200mA 0.028Ω 10000MHz
LQW18AN4N3B80p4.3nH ±0.1nH 100MHz 35 250MHz 2100mA 0.036Ω 11600MHz
LQW18AN4N3C80p4.3nH ±0.2nH 100MHz 35 250MHz 2100mA 0.036Ω 11600MHz
LQW18AN4N3G80p4.3nH ±2% 100MHz 35 250MHz 2100mA 0.036Ω 11600MHz
LQW18AN4N7B80p4.7nH ±0.1nH 100MHz 25 250MHz 1500mA 0.054Ω 10400MHz
LQW18AN4N7C80p4.7nH ±0.2nH 100MHz 25 250MHz 1500mA 0.054Ω 10400MHz
LQW18AN4N7G80p4.7nH ±2% 100MHz 25 250MHz 1500mA 0.054Ω 10400MHz
LQW18AN4N9B80p4.9nH ±0.1nH 100MHz 23 250MHz 1200mA 0.081Ω 7300MHz
LQW18AN4N9C80p4.9nH ±0.2nH 100MHz 23 250MHz 1200mA 0.081Ω 7300MHz
LQW18AN4N9G80p4.9nH ±2% 100MHz 23 250MHz 1200mA 0.081Ω 7300MHz
LQW18AN5N6C80p5.6nH ±0.2nH 100MHz 38 250MHz 1900mA 0.040Ω 6650MHz
LQW18AN5N6G80p5.6nH ±2% 100MHz 38 250MHz 1900mA 0.040Ω 6650MHz
LQW18AN6N0C80p6.0nH ±0.2nH 100MHz 40 250MHz 1900mA 0.040Ω 6650MHz
LQW18AN6N0G80p6.0nH ±2% 100MHz 40 250MHz 1900mA 0.040Ω 6650MHz
LQW18AN6N5C80p6.5nH ±0.2nH 100MHz 40 250MHz 1900mA 0.040Ω 6650MHz
LQW18AN6N5G80p6.5nH ±2% 100MHz 40 250MHz 1900mA 0.040Ω 6650MHz
LQW18AN6N8C80p6.8nH ±0.2nH 100MHz 40 250MHz 1900mA 0.040Ω 6650MHz
LQW18AN6N8G80p6.8nH ±2% 100MHz 40 250MHz 1900mA 0.040Ω 6650MHz
LQW18AN7N2C80p7.2nH ±0.2nH 100MHz 38 250MHz 1900mA 0.040Ω 6650MHz
LQW18AN7N2G80p7.2nH ±2% 100MHz 38 250MHz 1900mA 0.040Ω 6650MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW18AN_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
270
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18AN7N5C80p7.5nH ±0.2nH 100MHz 35 250MHz 1500mA 0.048Ω 7000MHz
LQW18AN7N5G80p7.5nH ±2% 100MHz 35 250MHz 1500mA 0.048Ω 7000MHz
LQW18AN8N2C80p8.2nH ±0.2nH 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN8N2G80p8.2nH ±2% 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN8N4C80p8.4nH ±0.2nH 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN8N4G80p8.4nH ±2% 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN8N7C80p8.7nH ±0.2nH 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN8N7G80p8.7nH ±2% 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN9N1C80p9.1nH ±0.2nH 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN9N1G80p9.1nH ±2% 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN9N5C80p9.5nH ±0.2nH 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN9N5G80p9.5nH ±2% 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN9N9C80p9.9nH ±0.2nH 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN9N9G80p9.9nH ±2% 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN10NG80p10nH ±2% 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN10NJ80p10nH ±5% 100MHz 38 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN11NG80p11nH ±2% 100MHz 40 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN11NJ80p11nH ±5% 100MHz 40 250MHz 1600mA 0.052Ω 4750MHz
LQW18AN12NG80p12nH ±2% 100MHz 37 250MHz 1500mA 0.064Ω 5000MHz
LQW18AN12NJ80p12nH ±5% 100MHz 37 250MHz 1500mA 0.064Ω 5000MHz
LQW18AN13NG80p13nH ±2% 100MHz 37 250MHz 1500mA 0.064Ω 5000MHz
LQW18AN13NJ80p13nH ±5% 100MHz 37 250MHz 1500mA 0.064Ω 5000MHz
LQW18AN15NG80p15nH ±2% 100MHz 38 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN15NJ80p15nH ±5% 100MHz 38 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN16NG80p16nH ±2% 100MHz 40 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN16NJ80p16nH ±5% 100MHz 40 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN17NG80p17nH ±2% 100MHz 40 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN17NJ80p17nH ±5% 100MHz 40 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN18NG80p18nH ±2% 100MHz 40 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN18NJ80p18nH ±5% 100MHz 40 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN19NG80p19nH ±2% 100MHz 40 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN19NJ80p19nH ±5% 100MHz 40 250MHz 1400mA 0.075Ω 4600MHz
LQW18AN22NG80p22nH ±2% 100MHz 40 250MHz 1300mA 0.086Ω 3450MHz
LQW18AN22NJ80p22nH ±5% 100MHz 40 250MHz 1300mA 0.086Ω 3450MHz
LQW18AN23NG80p23nH ±2% 100MHz 40 250MHz 1300mA 0.086Ω 3450MHz
LQW18AN23NJ80p23nH ±5% 100MHz 40 250MHz 1300mA 0.086Ω 3450MHz
LQW18AN24NG80p24nH ±2% 100MHz 40 250MHz 1300mA 0.086Ω 3450MHz
LQW18AN24NJ80p24nH ±5% 100MHz 40 250MHz 1300mA 0.086Ω 3450MHz
LQW18AN25NG80p25nH ±2% 100MHz 40 250MHz 1200mA 0.098Ω 3600MHz
LQW18AN25NJ80p25nH ±5% 100MHz 40 250MHz 1200mA 0.098Ω 3600MHz
LQW18AN27NG80p27nH ±2% 100MHz 40 250MHz 1200mA 0.098Ω 3600MHz
LQW18AN27NJ80p27nH ±5% 100MHz 40 250MHz 1200mA 0.098Ω 3600MHz
LQW18AN28NG80p28nH ±2% 100MHz 40 250MHz 1200mA 0.098Ω 3600MHz
LQW18AN28NJ80p28nH ±5% 100MHz 40 250MHz 1200mA 0.098Ω 3600MHz
LQW18AN30NG80p30nH ±2% 100MHz 40 250MHz 1100mA 0.12Ω 2880MHz
LQW18AN30NJ80p30nH ±5% 100MHz 40 250MHz 1100mA 0.12Ω 2880MHz
LQW18AN31NG80p31nH ±2% 100MHz 40 250MHz 1100mA 0.11Ω 3150MHz
LQW18AN31NJ80p31nH ±5% 100MHz 40 250MHz 1100mA 0.11Ω 3150MHz
LQW18AN33NG80p33nH ±2% 100MHz 40 250MHz 1100mA 0.11Ω 3150MHz
LQW18AN33NJ80p33nH ±5% 100MHz 40 250MHz 1100mA 0.11Ω 3150MHz
LQW18AN34NG80p34nH ±2% 100MHz 40 250MHz 1050mA 0.15Ω 3000MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW18AN_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
271
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18AN34NJ80p34nH ±5% 100MHz 40 250MHz 1050mA 0.15Ω 3000MHz
LQW18AN36NG80p36nH ±2% 100MHz 37 250MHz 910mA 0.20Ω 3000MHz
LQW18AN36NJ80p36nH ±5% 100MHz 37 250MHz 910mA 0.20Ω 3000MHz
LQW18AN37NG80p37nH ±2% 100MHz 37 250MHz 910mA 0.20Ω 3000MHz
LQW18AN37NJ80p37nH ±5% 100MHz 37 250MHz 910mA 0.20Ω 3000MHz
LQW18AN39NG80p39nH ±2% 100MHz 40 250MHz 1000mA 0.16Ω 3280MHz
LQW18AN39NJ80p39nH ±5% 100MHz 40 250MHz 1000mA 0.16Ω 3280MHz
LQW18AN41NG80p41nH ±2% 100MHz 40 250MHz 1000mA 0.16Ω 3280MHz
LQW18AN41NJ80p41nH ±5% 100MHz 40 250MHz 1000mA 0.16Ω 3280MHz
LQW18AN43NG80p43nH ±2% 100MHz 40 250MHz 840mA 0.21Ω 2780MHz
LQW18AN43NJ80p43nH ±5% 100MHz 40 250MHz 840mA 0.21Ω 2780MHz
LQW18AN44NG80p44nH ±2% 100MHz 40 250MHz 840mA 0.21Ω 2780MHz
LQW18AN44NJ80p44nH ±5% 100MHz 40 250MHz 840mA 0.21Ω 2780MHz
LQW18AN47NG80p47nH ±2% 100MHz 32 200MHz 830mA 0.23Ω 2700MHz
LQW18AN47NJ80p47nH ±5% 100MHz 32 200MHz 830mA 0.23Ω 2700MHz
LQW18AN48NG80p48nH ±2% 100MHz 32 200MHz 830mA 0.23Ω 2700MHz
LQW18AN48NJ80p48nH ±5% 100MHz 32 200MHz 830mA 0.23Ω 2700MHz
LQW18AN51NG80p51nH ±2% 100MHz 32 200MHz 830mA 0.23Ω 2700MHz
LQW18AN51NJ80p51nH ±5% 100MHz 32 200MHz 830mA 0.23Ω 2700MHz
LQW18AN52NG80p52nH ±2% 100MHz 35 200MHz 750mA 0.27Ω 2750MHz
LQW18AN52NJ80p52nH ±5% 100MHz 35 200MHz 750mA 0.27Ω 2750MHz
LQW18AN56NG80p56nH ±2% 100MHz 38 200MHz 770mA 0.26Ω 2600MHz
LQW18AN56NJ80p56nH ±5% 100MHz 38 200MHz 770mA 0.26Ω 2600MHz
LQW18AN58NG80p58nH ±2% 100MHz 35 200MHz 700mA 0.30Ω 2400MHz
LQW18AN58NJ80p58nH ±5% 100MHz 35 200MHz 700mA 0.30Ω 2400MHz
LQW18AN68NG80p68nH ±2% 100MHz 37 200MHz 630mA 0.38Ω 2380MHz
LQW18AN68NJ80p68nH ±5% 100MHz 37 200MHz 630mA 0.38Ω 2380MHz
LQW18AN69NG80p69nH ±2% 100MHz 37 200MHz 630mA 0.38Ω 2380MHz
LQW18AN69NJ80p69nH ±5% 100MHz 37 200MHz 630mA 0.38Ω 2380MHz
LQW18AN72NG80p72nH ±2% 100MHz 34 150MHz 560mA 0.47Ω 2330MHz
LQW18AN72NJ80p72nH ±5% 100MHz 34 150MHz 560mA 0.47Ω 2330MHz
LQW18AN73NG80p73nH ±2% 100MHz 28 150MHz 590mA 0.41Ω 2280MHz
LQW18AN73NJ80p73nH ±5% 100MHz 28 150MHz 590mA 0.41Ω 2280MHz
LQW18AN75NG80p75nH ±2% 100MHz 28 150MHz 590mA 0.41Ω 2280MHz
LQW18AN75NJ80p75nH ±5% 100MHz 28 150MHz 590mA 0.41Ω 2280MHz
LQW18AN78NG80p78nH ±2% 100MHz 28 150MHz 590mA 0.41Ω 2280MHz
LQW18AN78NJ80p78nH ±5% 100MHz 28 150MHz 590mA 0.41Ω 2280MHz
LQW18AN82NG80p82nH ±2% 100MHz 34 150MHz 550mA 0.5Ω 2230MHz
LQW18AN82NJ80p82nH ±5% 100MHz 34 150MHz 550mA 0.5Ω 2230MHz
LQW18AN83NG80p83nH ±2% 100MHz 34 150MHz 550mA 0.5Ω 2230MHz
LQW18AN83NJ80p83nH ±5% 100MHz 34 150MHz 550mA 0.5Ω 2230MHz
LQW18AN91NG80p91nH ±2% 100MHz 33 150MHz 520mA 0.54Ω 1900MHz
LQW18AN91NJ80p91nH ±5% 100MHz 33 150MHz 520mA 0.54Ω 1900MHz
LQW18AN94NG80p94nH ±2% 100MHz 34 150MHz 490mA 0.63Ω 1750MHz
LQW18AN94NJ80p94nH ±5% 100MHz 34 150MHz 490mA 0.63Ω 1750MHz
LQW18ANR10G80p100nH ±2% 100MHz 34 150MHz 490mA 0.63Ω 1750MHz
LQW18ANR10J80p100nH ±5% 100MHz 34 150MHz 490mA 0.63Ω 1750MHz
LQW18ANR11G80p110nH ±2% 100MHz 32 150MHz 450mA 0.7Ω 1730MHz
LQW18ANR11J80p110nH ±5% 100MHz 32 150MHz 450mA 0.7Ω 1730MHz
LQW18ANR12G80p120nH ±2% 100MHz 32 150MHz 450mA 0.72Ω 1650MHz
LQW18ANR12J80p120nH ±5% 100MHz 32 150MHz 450mA 0.72Ω 1650MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW18AN_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
272
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18ANR15G80p150nH ±2% 100MHz 28 150MHz 420mA 0.87Ω 1580MHz
LQW18ANR15J80p150nH ±5% 100MHz 28 150MHz 420mA 0.87Ω 1580MHz
LQW18ANR18G80p180nH ±2% 100MHz 25 100MHz 310mA 1.65Ω 1380MHz
LQW18ANR18J80p180nH ±5% 100MHz 25 100MHz 310mA 1.65Ω 1380MHz
LQW18ANR20G80p200nH ±2% 100MHz 25 100MHz 290mA 1.74Ω 1350MHz
LQW18ANR20J80p200nH ±5% 100MHz 25 100MHz 290mA 1.74Ω 1350MHz
LQW18ANR21G80p210nH ±2% 100MHz 27 100MHz 280mA 1.98Ω 1330MHz
LQW18ANR21J80p210nH ±5% 100MHz 27 100MHz 280mA 1.98Ω 1330MHz
LQW18ANR22G80p220nH ±2% 100MHz 25 100MHz 280mA 2.08Ω 1330MHz
LQW18ANR22J80p220nH ±5% 100MHz 25 100MHz 280mA 2.08Ω 1330MHz
LQW18ANR25G80p250nH ±2% 100MHz 24 100MHz 250mA 2.28Ω 1330MHz
LQW18ANR25J80p250nH ±5% 100MHz 24 100MHz 250mA 2.28Ω 1330MHz
LQW18ANR27G80p270nH ±2% 100MHz 24 100MHz 260mA 2.42Ω 1250MHz
LQW18ANR27J80p270nH ±5% 100MHz 24 100MHz 260mA 2.42Ω 1250MHz
LQW18ANR30G80p300nH ±2% 100MHz 25 100MHz 220mA 3.12Ω 1200MHz
LQW18ANR30J80p300nH ±5% 100MHz 25 100MHz 220mA 3.12Ω 1200MHz
LQW18ANR33G80p330nH ±2% 100MHz 25 100MHz 190mA 3.84Ω 1100MHz
LQW18ANR33J80p330nH ±5% 100MHz 25 100MHz 190mA 3.84Ω 1100MHz
LQW18ANR36G80p360nH ±2% 100MHz 25 100MHz 190mA 3.98Ω 1050MHz
LQW18ANR36J80p360nH ±5% 100MHz 25 100MHz 190mA 3.98Ω 1050MHz
LQW18ANR39G80p390nH ±2% 100MHz 25 100MHz 190mA 4.23Ω 1100MHz
LQW18ANR39J80p390nH ±5% 100MHz 25 100MHz 190mA 4.23Ω 1100MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW18AN_80 series. Please apply the derating curve shown in the chart according to the operating
temperature. Please consider the "Notice (Rating)."
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
273
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQW18AN_80 series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
100
50
0
125850
Current derating (%)
Temperature (°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
274
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW18AS_00 Series 0603 (1608) inch (mm)
Appearance/Dimensions
1.6±0.2
*1 0.8±0.2
0.80±0.15
(in mm)
0.8±0.2
0.2±0.1
0.3±0.1 0.3±0.1
*1 LQW18AN_1p/
LQW18AS: 0.8±0.3
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 4000
Jø330mm Paper Taping 10000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18AS1N6J00p1.6nH ±5% 250MHz 24 250MHz 700mA 0.030Ω 12500MHz
LQW18AS1N8J00p1.8nH ±5% 250MHz 16 250MHz 700mA 0.045Ω 12500MHz
LQW18AS3N3G00p3.3nH ±2% 250MHz 35 250MHz 700mA 0.045Ω 5900MHz
LQW18AS3N3J00p3.3nH ±5% 250MHz 35 250MHz 700mA 0.045Ω 5900MHz
LQW18AS3N6G00p3.6nH ±2% 250MHz 22 250MHz 700mA 0.063Ω 5900MHz
LQW18AS3N6J00p3.6nH ±5% 250MHz 22 250MHz 700mA 0.063Ω 5900MHz
LQW18AS3N9G00p3.9nH ±2% 250MHz 22 250MHz 700mA 0.080Ω 6900MHz
LQW18AS3N9J00p3.9nH ±5% 250MHz 22 250MHz 700mA 0.080Ω 6900MHz
LQW18AS4N3G00p4.3nH ±2% 250MHz 22 250MHz 700mA 0.063Ω 5900MHz
LQW18AS4N3J00p4.3nH ±5% 250MHz 22 250MHz 700mA 0.063Ω 5900MHz
LQW18AS4N7G00p4.7nH ±2% 250MHz 20 250MHz 700mA 0.116Ω 5800MHz
LQW18AS4N7J00p4.7nH ±5% 250MHz 20 250MHz 700mA 0.116Ω 5800MHz
LQW18AS5N1G00p5.1nH ±2% 250MHz 20 250MHz 700mA 0.140Ω 5700MHz
LQW18AS5N1J00p5.1nH ±5% 250MHz 20 250MHz 700mA 0.140Ω 5700MHz
LQW18AS5N6G00p5.6nH ±2% 250MHz 26 250MHz 700mA 0.075Ω 4760MHz
LQW18AS5N6J00p5.6nH ±5% 250MHz 26 250MHz 700mA 0.075Ω 4760MHz
LQW18AS6N8G00p6.8nH ±2% 250MHz 27 250MHz 700mA 0.110Ω 5800MHz
LQW18AS6N8J00p6.8nH ±5% 250MHz 27 250MHz 700mA 0.110Ω 5800MHz
LQW18AS7N5G00p7.5nH ±2% 250MHz 28 250MHz 700mA 0.106Ω 4800MHz
LQW18AS7N5J00p7.5nH ±5% 250MHz 28 250MHz 700mA 0.106Ω 4800MHz
LQW18AS8N2G00p8.2nH ±2% 250MHz 30 250MHz 700mA 0.115Ω 4200MHz
LQW18AS8N2J00p8.2nH ±5% 250MHz 30 250MHz 700mA 0.115Ω 4200MHz
LQW18AS8N7G00p8.7nH ±2% 250MHz 28 250MHz 700mA 0.109Ω 4600MHz
LQW18AS8N7J00p8.7nH ±5% 250MHz 28 250MHz 700mA 0.109Ω 4600MHz
LQW18AS9N5G00p9.5nH ±2% 250MHz 28 250MHz 700mA 0.135Ω 5400MHz
LQW18AS9N5J00p9.5nH ±5% 250MHz 28 250MHz 700mA 0.135Ω 5400MHz
LQW18AS10NG00p10nH ±2% 250MHz 31 250MHz 700mA 0.130Ω 4800MHz
LQW18AS10NJ00p10nH ±5% 250MHz 31 250MHz 700mA 0.130Ω 4800MHz
LQW18AS11NG00p11nH ±2% 250MHz 30 250MHz 700mA 0.086Ω 4000MHz
LQW18AS11NJ00p11nH ±5% 250MHz 30 250MHz 700mA 0.086Ω 4000MHz
LQW18AS12NG00p12nH ±2% 250MHz 35 250MHz 700mA 0.130Ω 4000MHz
LQW18AS12NJ00p12nH ±5% 250MHz 35 250MHz 700mA 0.130Ω 4000MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
275
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18AS15NG00p15nH ±2% 250MHz 35 250MHz 700mA 0.170Ω 4000MHz
LQW18AS15NJ00p15nH ±5% 250MHz 35 250MHz 700mA 0.170Ω 4000MHz
LQW18AS16NG00p16nH ±2% 250MHz 34 250MHz 700mA 0.104Ω 3300MHz
LQW18AS16NJ00p16nH ±5% 250MHz 34 250MHz 700mA 0.104Ω 3300MHz
LQW18AS18NG00p18nH ±2% 250MHz 35 250MHz 700mA 0.170Ω 3100MHz
LQW18AS18NJ00p18nH ±5% 250MHz 35 250MHz 700mA 0.170Ω 3100MHz
LQW18AS22NG00p22nH ±2% 250MHz 38 250MHz 700mA 0.190Ω 3000MHz
LQW18AS22NJ00p22nH ±5% 250MHz 38 250MHz 700mA 0.190Ω 3000MHz
LQW18AS23NG00p23nH ±2% 250MHz 38 250MHz 700mA 0.190Ω 2850MHz
LQW18AS23NJ00p23nH ±5% 250MHz 38 250MHz 700mA 0.190Ω 2850MHz
LQW18AS24NG00p24nH ±2% 250MHz 36 250MHz 700mA 0.135Ω 2650MHz
LQW18AS24NJ00p24nH ±5% 250MHz 36 250MHz 700mA 0.135Ω 2650MHz
LQW18AS27NG00p27nH ±2% 250MHz 40 250MHz 600mA 0.220Ω 2800MHz
LQW18AS27NJ00p27nH ±5% 250MHz 40 250MHz 600mA 0.220Ω 2800MHz
LQW18AS30NG00p30nH ±2% 250MHz 37 250MHz 600mA 0.144Ω 2250MHz
LQW18AS30NJ00p30nH ±5% 250MHz 37 250MHz 600mA 0.144Ω 2250MHz
LQW18AS33NG00p33nH ±2% 250MHz 40 250MHz 600mA 0.220Ω 2300MHz
LQW18AS33NJ00p33nH ±5% 250MHz 40 250MHz 600mA 0.220Ω 2300MHz
LQW18AS36NG00p36nH ±2% 250MHz 37 250MHz 600mA 0.250Ω 2080MHz
LQW18AS36NJ00p36nH ±5% 250MHz 37 250MHz 600mA 0.250Ω 2080MHz
LQW18AS39NG00p39nH ±2% 250MHz 40 250MHz 600mA 0.250Ω 2200MHz
LQW18AS39NJ00p39nH ±5% 250MHz 40 250MHz 600mA 0.250Ω 2200MHz
LQW18AS43NG00p43nH ±2% 250MHz 38 250MHz 600mA 0.280Ω 2000MHz
LQW18AS43NJ00p43nH ±5% 250MHz 38 250MHz 600mA 0.280Ω 2000MHz
LQW18AS47NG00p47nH ±2% 200MHz 38 200MHz 600mA 0.280Ω 2000MHz
LQW18AS47NJ00p47nH ±5% 200MHz 38 200MHz 600mA 0.280Ω 2000MHz
LQW18AS51NG00p51nH ±2% 200MHz 35 200MHz 600mA 0.270Ω 1900MHz
LQW18AS51NJ00p51nH ±5% 200MHz 35 200MHz 600mA 0.270Ω 1900MHz
LQW18AS56NG00p56nH ±2% 200MHz 38 200MHz 600mA 0.310Ω 1900MHz
LQW18AS56NJ00p56nH ±5% 200MHz 38 200MHz 600mA 0.310Ω 1900MHz
LQW18AS68NG00p68nH ±2% 200MHz 37 200MHz 600mA 0.340Ω 1700MHz
LQW18AS68NJ00p68nH ±5% 200MHz 37 200MHz 600mA 0.340Ω 1700MHz
LQW18AS72NG00p72nH ±2% 150MHz 34 150MHz 400mA 0.490Ω 1700MHz
LQW18AS72NJ00p72nH ±5% 150MHz 34 150MHz 400mA 0.490Ω 1700MHz
LQW18AS82NG00p82nH ±2% 150MHz 34 150MHz 400mA 0.540Ω 1700MHz
LQW18AS82NJ00p82nH ±5% 150MHz 34 150MHz 400mA 0.540Ω 1700MHz
LQW18ASR10G00p100nH ±2% 150MHz 34 150MHz 400mA 0.580Ω 1400MHz
LQW18ASR10J00p100nH ±5% 150MHz 34 150MHz 400mA 0.580Ω 1400MHz
LQW18ASR11G00p110nH ±2% 150MHz 32 150MHz 300mA 0.610Ω 1350MHz
LQW18ASR11J00p110nH ±5% 150MHz 32 150MHz 300mA 0.610Ω 1350MHz
LQW18ASR12G00p120nH ±2% 150MHz 32 150MHz 300mA 0.650Ω 1300MHz
LQW18ASR12J00p120nH ±5% 150MHz 32 150MHz 300mA 0.650Ω 1300MHz
LQW18ASR15G00p150nH ±2% 150MHz 28 150MHz 280mA 0.920Ω 990MHz
LQW18ASR15J00p150nH ±5% 150MHz 28 150MHz 280mA 0.920Ω 990MHz
LQW18ASR18G00p180nH ±2% 100MHz 25 100MHz 240mA 1.250Ω 990MHz
LQW18ASR18J00p180nH ±5% 100MHz 25 100MHz 240mA 1.250Ω 990MHz
LQW18ASR20G00p200nH ±2% 100MHz 25 100MHz 200mA 1.980Ω 900MHz
LQW18ASR20J00p200nH ±5% 100MHz 25 100MHz 200mA 1.980Ω 900MHz
LQW18ASR21G00p210nH ±2% 100MHz 27 100MHz 200mA 2.060Ω 895MHz
LQW18ASR21J00p210nH ±5% 100MHz 27 100MHz 200mA 2.060Ω 895MHz
LQW18ASR22G00p220nH ±2% 100MHz 25 100MHz 200mA 2.100Ω 900MHz
LQW18ASR22J00p220nH ±5% 100MHz 25 100MHz 200mA 2.100Ω 900MHz
LQW18ASR25G00p250nH ±2% 100MHz 25 100MHz 120mA 3.550Ω 822MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
276
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW18ASR25J00p250nH ±5% 100MHz 25 100MHz 120mA 3.550Ω 822MHz
LQW18ASR27G00p270nH ±2% 100MHz 24 100MHz 170mA 2.300Ω 900MHz
LQW18ASR27J00p270nH ±5% 100MHz 24 100MHz 170mA 2.300Ω 900MHz
LQW18ASR33G00p330nH ±2% 100MHz 25 100MHz 100mA 3.890Ω 900MHz
LQW18ASR33J00p330nH ±5% 100MHz 25 100MHz 100mA 3.890Ω 900MHz
LQW18ASR39G00p390nH ±2% 100MHz 25 100MHz 100mA 4.350Ω 900MHz
LQW18ASR39J00p390nH ±5% 100MHz 25 100MHz 100mA 4.350Ω 900MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
277
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW2BAN_00 Series 0805 (2015) inch (mm)
Appearance/Dimensions
(in mm)
1.53±0.22.09±0.2
1.42±0.1
1.5±0.2
0.5±0.1
0.25±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 8000
Lø180mm Embossed Taping 2000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW2BAN3N2J00p3.2nH ±5% 250MHz 95 1500MHz 3800mA 0.02Ω 13800MHz
LQW2BAN3N6J00p3.6nH ±5% 250MHz 75 1500MHz 2000mA 0.05Ω 11800MHz
LQW2BAN6N8J00p6.8nH ±5% 250MHz 90 1000MHz 3000mA 0.03Ω 6200MHz
LQW2BAN7N5J00p7.5nH ±5% 250MHz 85 1000MHz 2400mA 0.04Ω 3900MHz
LQW2BAN8N2G00p8.2nH ±2% 250MHz 80 1000MHz 1500mA 0.09Ω 3200MHz
LQW2BAN8N2J00p8.2nH ±5% 250MHz 80 1000MHz 1500mA 0.09Ω 3200MHz
LQW2BAN11NG00p11nH ±2% 250MHz 80 500MHz 2400mA 0.04Ω 4700MHz
LQW2BAN11NJ00p11nH ±5% 250MHz 80 500MHz 2400mA 0.04Ω 4700MHz
LQW2BAN12NG00p12nH ±2% 250MHz 80 500MHz 2400mA 0.04Ω 4300MHz
LQW2BAN12NJ00p12nH ±5% 250MHz 80 500MHz 2400mA 0.04Ω 4300MHz
LQW2BAN13NG00p13nH ±2% 250MHz 80 500MHz 2400mA 0.04Ω 3500MHz
LQW2BAN13NJ00p13nH ±5% 250MHz 80 500MHz 2400mA 0.04Ω 3500MHz
LQW2BAN15NG00p15nH ±2% 250MHz 70 500MHz 1500mA 0.12Ω 1940MHz
LQW2BAN15NJ00p15nH ±5% 250MHz 70 500MHz 1500mA 0.12Ω 1940MHz
LQW2BAN18NG00p18nH ±2% 250MHz 85 500MHz 2200mA 0.05Ω 3620MHz
LQW2BAN18NJ00p18nH ±5% 250MHz 85 500MHz 2200mA 0.05Ω 3620MHz
LQW2BAN20NG00p20nH ±2% 250MHz 85 500MHz 2200mA 0.05Ω 2960MHz
LQW2BAN20NJ00p20nH ±5% 250MHz 85 500MHz 2200mA 0.05Ω 2960MHz
LQW2BAN22NG00p22nH ±2% 250MHz 85 500MHz 1900mA 0.07Ω 1850MHz
LQW2BAN22NJ00p22nH ±5% 250MHz 85 500MHz 1900mA 0.07Ω 1850MHz
LQW2BAN24NG00p24nH ±2% 250MHz 75 500MHz 1400mA 0.15Ω 1970MHz
LQW2BAN24NJ00p24nH ±5% 250MHz 75 500MHz 1400mA 0.15Ω 1970MHz
LQW2BAN27NG00p27nH ±2% 250MHz 85 500MHz 2000mA 0.07Ω 2750MHz
LQW2BAN27NJ00p27nH ±5% 250MHz 85 500MHz 2000mA 0.07Ω 2750MHz
LQW2BAN30NG00p30nH ±2% 250MHz 80 500MHz 2000mA 0.08Ω 2000MHz
LQW2BAN30NJ00p30nH ±5% 250MHz 80 500MHz 2000mA 0.08Ω 2000MHz
LQW2BAN33NG00p33nH ±2% 250MHz 75 500MHz 1500mA 0.12Ω 1900MHz
LQW2BAN33NJ00p33nH ±5% 250MHz 75 500MHz 1500mA 0.12Ω 1900MHz
LQW2BAN36NG00p36nH ±2% 250MHz 75 500MHz 1900mA 0.08Ω 1900MHz
LQW2BAN36NJ00p36nH ±5% 250MHz 75 500MHz 1900mA 0.08Ω 1900MHz
LQW2BAN39NG00p39nH ±2% 250MHz 75 500MHz 1900mA 0.08Ω 1900MHz
Operating temp. range (Self-temp. rise included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW2BAN_00 series. Please apply the derating curve shown in the chart according to the operating
temperature. When rated current is applied to the products, self-temperature rise shall be limited to 40°C max. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
278
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW2BAN39NJ00p39nH ±5% 250MHz 75 500MHz 1900mA 0.08Ω 1900MHz
LQW2BAN43NG00p43nH ±2% 200MHz 75 500MHz 1550mA 0.12Ω 1720MHz
LQW2BAN43NJ00p43nH ±5% 200MHz 75 500MHz 1550mA 0.12Ω 1720MHz
LQW2BAN47NG00p47nH ±2% 200MHz 70 500MHz 1250mA 0.20Ω 1500MHz
LQW2BAN47NJ00p47nH ±5% 200MHz 70 500MHz 1250mA 0.20Ω 1500MHz
LQW2BAN51NG00p51nH ±2% 200MHz 75 500MHz 1800mA 0.11Ω 1100MHz
LQW2BAN51NJ00p51nH ±5% 200MHz 75 500MHz 1800mA 0.11Ω 1100MHz
LQW2BAN56NG00p56nH ±2% 200MHz 70 500MHz 1250mA 0.18Ω 1600MHz
LQW2BAN56NJ00p56nH ±5% 200MHz 70 500MHz 1250mA 0.18Ω 1600MHz
LQW2BAN62NG00p62nH ±2% 200MHz 70 500MHz 1650mA 0.12Ω 1470MHz
LQW2BAN62NJ00p62nH ±5% 200MHz 70 500MHz 1650mA 0.12Ω 1470MHz
LQW2BAN68NG00p68nH ±2% 200MHz 70 500MHz 1250mA 0.2Ω 1470MHz
LQW2BAN68NJ00p68nH ±5% 200MHz 70 500MHz 1250mA 0.2Ω 1470MHz
LQW2BAN75NG00p75nH ±2% 200MHz 68 500MHz 1100mA 0.28Ω 1450MHz
LQW2BAN75NJ00p75nH ±5% 200MHz 68 500MHz 1100mA 0.28Ω 1450MHz
LQW2BAN82NG00p82nH ±2% 150MHz 70 500MHz 1200mA 0.24Ω 1330MHz
LQW2BAN82NJ00p82nH ±5% 150MHz 70 500MHz 1200mA 0.24Ω 1330MHz
LQW2BAN91NG00p91nH ±2% 150MHz 70 500MHz 1300mA 0.21Ω 1140MHz
LQW2BAN91NJ00p91nH ±5% 150MHz 70 500MHz 1300mA 0.21Ω 1140MHz
LQW2BANR10G00p100nH ±2% 150MHz 66 500MHz 1050mA 0.35Ω 1200MHz
LQW2BANR10J00p100nH ±5% 150MHz 66 500MHz 1050mA 0.35Ω 1200MHz
LQW2BANR11G00p110nH ±2% 150MHz 57 250MHz 970mA 0.38Ω 1200MHz
LQW2BANR11J00p110nH ±5% 150MHz 57 250MHz 970mA 0.38Ω 1200MHz
LQW2BANR12G00p120nH ±2% 150MHz 57 250MHz 970mA 0.38Ω 1200MHz
LQW2BANR12J00p120nH ±5% 150MHz 57 250MHz 970mA 0.38Ω 1200MHz
LQW2BANR13G00p130nH ±2% 150MHz 56 250MHz 950mA 0.42Ω 1000MHz
LQW2BANR13J00p130nH ±5% 150MHz 56 250MHz 950mA 0.42Ω 1000MHz
LQW2BANR15G00p150nH ±2% 100MHz 58 250MHz 930mA 0.46Ω 920MHz
LQW2BANR15J00p150nH ±5% 100MHz 58 250MHz 930mA 0.46Ω 920MHz
LQW2BANR16G00p160nH ±2% 100MHz 53 250MHz 930mA 0.46Ω 920MHz
LQW2BANR16J00p160nH ±5% 100MHz 53 250MHz 930mA 0.46Ω 920MHz
LQW2BANR18G00p180nH ±2% 100MHz 53 250MHz 800mA 0.58Ω 920MHz
LQW2BANR18J00p180nH ±5% 100MHz 53 250MHz 800mA 0.58Ω 920MHz
LQW2BANR20G00p200nH ±2% 100MHz 53 250MHz 750mA 0.63Ω 920MHz
LQW2BANR20J00p200nH ±5% 100MHz 53 250MHz 750mA 0.63Ω 920MHz
Operating temp. range (Self-temp. rise included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
In operating temperatures exceeding +85°C, derating of current is necessary for the LQW2BAN_00 series. Please apply the derating curve shown in the chart according to the operating
temperature. When rated current is applied to the products, self-temperature rise shall be limited to 40°C max. Please consider the "Notice (Rating)."
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
279
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
Notice (Rating)
In operating temperatures exceeding +85°C, derating of
current is necessary for the LQW2BAN series.
Please apply the derating curve shown in the chart
according to the operating temperature.
Derating of Rated Current
100
50
0
125850
Rated Derating (%)
Operating Temperature (°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
280
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW2BAS_00 Series 0805 (2015) inch (mm)
Appearance/Dimensions
(in mm)
1.53±0.22.09±0.2
1.42±0.1
1.5±0.2
0.5±0.1
0.25±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 8000
Lø180mm Embossed Taping 2000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW2BAS2N8J00p2.8nH ±5% 250MHz 80 1500MHz 800mA 0.06Ω 12200MHz
LQW2BAS3N0J00p3.0nH ±5% 250MHz 65 1500MHz 800mA 0.06Ω 12200MHz
LQW2BAS5N6J00p5.6nH ±5% 250MHz 65 1000MHz 600mA 0.08Ω 5900MHz
LQW2BAS6N8J00p6.8nH ±5% 250MHz 50 1000MHz 600mA 0.11Ω 5600MHz
LQW2BAS7N5J00p7.5nH ±5% 250MHz 50 1000MHz 600mA 0.14Ω 4800MHz
LQW2BAS8N2G00p8.2nH ±2% 250MHz 50 1000MHz 600mA 0.12Ω 4400MHz
LQW2BAS8N2J00p8.2nH ±5% 250MHz 50 1000MHz 600mA 0.12Ω 4400MHz
LQW2BAS10NG00p10nH ±2% 250MHz 60 500MHz 600mA 0.10Ω 4300MHz
LQW2BAS10NJ00p10nH ±5% 250MHz 60 500MHz 600mA 0.10Ω 4300MHz
LQW2BAS12NG00p12nH ±2% 250MHz 50 500MHz 600mA 0.15Ω 4000MHz
LQW2BAS12NJ00p12nH ±5% 250MHz 50 500MHz 600mA 0.15Ω 4000MHz
LQW2BAS15NG00p15nH ±2% 250MHz 50 500MHz 600mA 0.17Ω 3200MHz
LQW2BAS15NJ00p15nH ±5% 250MHz 50 500MHz 600mA 0.17Ω 3200MHz
LQW2BAS18NG00p18nH ±2% 250MHz 50 500MHz 600mA 0.20Ω 3100MHz
LQW2BAS18NJ00p18nH ±5% 250MHz 50 500MHz 600mA 0.20Ω 3100MHz
LQW2BAS22NG00p22nH ±2% 250MHz 55 500MHz 500mA 0.22Ω 2600MHz
LQW2BAS22NJ00p22nH ±5% 250MHz 55 500MHz 500mA 0.22Ω 2600MHz
LQW2BAS24NG00p24nH ±2% 250MHz 50 500MHz 500mA 0.22Ω 2400MHz
LQW2BAS24NJ00p24nH ±5% 250MHz 50 500MHz 500mA 0.22Ω 2400MHz
LQW2BAS27NG00p27nH ±2% 250MHz 55 500MHz 500mA 0.25Ω 2580MHz
LQW2BAS27NJ00p27nH ±5% 250MHz 55 500MHz 500mA 0.25Ω 2580MHz
LQW2BAS33NG00p33nH ±2% 250MHz 60 500MHz 500mA 0.27Ω 2150MHz
LQW2BAS33NJ00p33nH ±5% 250MHz 60 500MHz 500mA 0.27Ω 2150MHz
LQW2BAS36NG00p36nH ±2% 250MHz 55 500MHz 500mA 0.27Ω 1900MHz
LQW2BAS36NJ00p36nH ±5% 250MHz 55 500MHz 500mA 0.27Ω 1900MHz
LQW2BAS39NG00p39nH ±2% 250MHz 60 500MHz 500mA 0.29Ω 2000MHz
LQW2BAS39NJ00p39nH ±5% 250MHz 60 500MHz 500mA 0.29Ω 2000MHz
LQW2BAS43NG00p43nH ±2% 200MHz 60 500MHz 500mA 0.34Ω 1800MHz
LQW2BAS43NJ00p43nH ±5% 200MHz 60 500MHz 500mA 0.34Ω 1800MHz
LQW2BAS47NG00p47nH ±2% 200MHz 60 500MHz 500mA 0.31Ω 1700MHz
LQW2BAS47NJ00p47nH ±5% 200MHz 60 500MHz 500mA 0.31Ω 1700MHz
LQW2BAS56NG00p56nH ±2% 200MHz 60 500MHz 500mA 0.34Ω 1600MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
281
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW2BAS56NJ00p56nH ±5% 200MHz 60 500MHz 500mA 0.34Ω 1600MHz
LQW2BAS68NG00p68nH ±2% 200MHz 60 500MHz 500mA 0.38Ω 1500MHz
LQW2BAS68NJ00p68nH ±5% 200MHz 60 500MHz 500mA 0.38Ω 1500MHz
LQW2BAS82NG00p82nH ±2% 150MHz 65 500MHz 400mA 0.42Ω 1330MHz
LQW2BAS82NJ00p82nH ±5% 150MHz 65 500MHz 400mA 0.42Ω 1330MHz
LQW2BAS91NG00p91nH ±2% 150MHz 65 500MHz 400mA 0.48Ω 1330MHz
LQW2BAS91NJ00p91nH ±5% 150MHz 65 500MHz 400mA 0.48Ω 1330MHz
LQW2BASR10G00p100nH ±2% 150MHz 65 500MHz 400mA 0.46Ω 1250MHz
LQW2BASR10J00p100nH ±5% 150MHz 65 500MHz 400mA 0.46Ω 1250MHz
LQW2BASR11G00p110nH ±2% 150MHz 50 250MHz 400mA 0.48Ω 1100MHz
LQW2BASR11J00p110nH ±5% 150MHz 50 250MHz 400mA 0.48Ω 1100MHz
LQW2BASR12G00p120nH ±2% 150MHz 50 250MHz 400mA 0.51Ω 1100MHz
LQW2BASR12J00p120nH ±5% 150MHz 50 250MHz 400mA 0.51Ω 1100MHz
LQW2BASR15G00p150nH ±2% 100MHz 50 250MHz 400mA 0.56Ω 920MHz
LQW2BASR15J00p150nH ±5% 100MHz 50 250MHz 400mA 0.56Ω 920MHz
LQW2BASR18G00p180nH ±2% 100MHz 50 250MHz 400mA 0.64Ω 920MHz
LQW2BASR18J00p180nH ±5% 100MHz 50 250MHz 400mA 0.64Ω 920MHz
LQW2BASR22G00p220nH ±2% 100MHz 50 250MHz 400mA 0.70Ω 820MHz
LQW2BASR22J00p220nH ±5% 100MHz 50 250MHz 400mA 0.70Ω 820MHz
LQW2BASR24G00p240nH ±2% 100MHz 44 250MHz 350mA 1.00Ω 770MHz
LQW2BASR24J00p240nH ±5% 100MHz 44 250MHz 350mA 1.00Ω 770MHz
LQW2BASR27G00p270nH ±2% 100MHz 48 250MHz 350mA 1.00Ω 730MHz
LQW2BASR27J00p270nH ±5% 100MHz 48 250MHz 350mA 1.00Ω 730MHz
LQW2BASR33G00p330nH ±2% 100MHz 48 250MHz 310mA 1.40Ω 650MHz
LQW2BASR33J00p330nH ±5% 100MHz 48 250MHz 310mA 1.40Ω 650MHz
LQW2BASR39J00p390nH ±5% 100MHz 48 250MHz 290mA 1.50Ω 600MHz
LQW2BASR47J00p470nH ±5% 50MHz 33 100MHz 250mA 1.76Ω 300MHz
LQW2BASR56J00p560nH ±5% 25MHz 23 50MHz 230mA 1.90Ω 270MHz
LQW2BASR68J00p680nH ±5% 25MHz 23 50MHz 190mA 2.20Ω 250MHz
LQW2BASR82J00p820nH ±5% 25MHz 23 50MHz 180mA 2.35Ω 230MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
282
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW2BHN_03 Series 0805 (2015) inch (mm)
Appearance/Dimensions
1.5±0.2 1.5±0.2
0.5 min. 0.5 min. 0.5 min.
1.5±0.22.0±0.2
(in mm)
1.7 +0.08
-
0.1
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW2BHN3N3D03p3.3nH ±0.5nH 100MHz 10 250MHz 910mA 0.05Ω 6000MHz
LQW2BHN6N8D03p6.8nH ±0.5nH 100MHz 20 250MHz 680mA 0.11Ω 5400MHz
LQW2BHN8N2D03p8.2nH ±0.5nH 100MHz 20 250MHz 630mA 0.12Ω 3900MHz
LQW2BHN10NJ03p10nH ±5% 100MHz 30 250MHz 1320mA 0.03Ω 3300MHz
LQW2BHN12NJ03p12nH ±5% 100MHz 30 250MHz 680mA 0.11Ω 3200MHz
LQW2BHN15NJ03p15nH ±5% 100MHz 30 250MHz 630mA 0.12Ω 2700MHz
LQW2BHN18NJ03p18nH ±5% 100MHz 30 250MHz 690mA 0.10Ω 2600MHz
LQW2BHN22NJ03p22nH ±5% 100MHz 30 250MHz 720mA 0.09Ω 2100MHz
LQW2BHN27NJ03p27nH ±5% 100MHz 40 250MHz 540mA 0.17Ω 2300MHz
LQW2BHN33NG03p33nH ±2% 100MHz 40 250MHz 570mA 0.15Ω 1900MHz
LQW2BHN33NJ03p33nH ±5% 100MHz 40 250MHz 570mA 0.15Ω 1900MHz
LQW2BHN39NG03p39nH ±2% 100MHz 40 250MHz 730mA 0.09Ω 1700MHz
LQW2BHN39NJ03p39nH ±5% 100MHz 40 250MHz 730mA 0.09Ω 1700MHz
LQW2BHN47NG03p47nH ±2% 100MHz 40 200MHz 450mA 0.23Ω 1600MHz
LQW2BHN47NJ03p47nH ±5% 100MHz 40 200MHz 450mA 0.23Ω 1600MHz
LQW2BHN56NG03p56nH ±2% 100MHz 40 200MHz 430mA 0.26Ω 1500MHz
LQW2BHN56NJ03p56nH ±5% 100MHz 40 200MHz 430mA 0.26Ω 1500MHz
LQW2BHN68NG03p68nH ±2% 100MHz 40 200MHz 460mA 0.23Ω 1200MHz
LQW2BHN68NJ03p68nH ±5% 100MHz 40 200MHz 460mA 0.23Ω 1200MHz
LQW2BHN82NG03p82nH ±2% 100MHz 40 150MHz 320mA 0.42Ω 1100MHz
LQW2BHN82NJ03p82nH ±5% 100MHz 40 150MHz 320mA 0.42Ω 1100MHz
LQW2BHNR10G03p100nH ±2% 100MHz 35 150MHz 270mA 0.55Ω 900MHz
LQW2BHNR10J03p100nH ±5% 100MHz 40 150MHz 350mA 0.38Ω 900MHz
LQW2BHNR12G03p120nH ±2% 100MHz 40 150MHz 320mA 0.40Ω 750MHz
LQW2BHNR12J03p120nH ±5% 100MHz 40 150MHz 320mA 0.40Ω 750MHz
LQW2BHNR15G03p150nH ±2% 100MHz 30 150MHz 260mA 0.68Ω 350MHz
LQW2BHNR15J03p150nH ±5% 100MHz 30 150MHz 390mA 0.47Ω 350MHz
LQW2BHNR18G03p180nH ±2% 100MHz 35 100MHz 250mA 0.71Ω 700MHz
LQW2BHNR18J03p180nH ±5% 100MHz 35 100MHz 250mA 0.71Ω 700MHz
LQW2BHNR22G03p220nH ±2% 100MHz 35 100MHz 240mA 0.70Ω 500MHz
LQW2BHNR22J03p220nH ±5% 100MHz 35 100MHz 240mA 0.70Ω 500MHz
LQW2BHNR27J03p270nH ±5% 10MHz 15 25.2MHz 190mA 2.00Ω 550MHz
LQW2BHNR27K03p270nH ±10% 10MHz 15 25.2MHz 190mA 2.00Ω 550MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
283
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW2BHNR33J03p330nH ±5% 10MHz 15 25.2MHz 180mA 2.20Ω 500MHz
LQW2BHNR33K03p330nH ±10% 10MHz 15 25.2MHz 180mA 2.20Ω 500MHz
LQW2BHNR39J03p390nH ±5% 10MHz 15 25.2MHz 170mA 2.50Ω 400MHz
LQW2BHNR39K03p390nH ±10% 10MHz 15 25.2MHz 170mA 2.50Ω 400MHz
LQW2BHNR47J03p470nH ±5% 10MHz 15 25.2MHz 160mA 2.80Ω 350MHz
LQW2BHNR47K03p470nH ±10% 10MHz 15 25.2MHz 160mA 2.80Ω 350MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
284
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW2BHN_13 Series 0805 (2015) inch (mm)
Appearance/Dimensions
1.5±0.2 1.5±0.2
0.5 min. 0.5 min. 0.5 min.
1.5±0.22.0±0.2
(in mm)
1.7 +0.08
-
0.1
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW2BHN2N7D13p2.7nH ±0.5nH 100MHz 20 250MHz 1900mA 0.02Ω 6000MHz
LQW2BHN3N1D13p3.1nH ±0.5nH 100MHz 20 250MHz 1800mA 0.02Ω 6000MHz
LQW2BHN3N3D13p3.3nH ±0.5nH 100MHz 20 250MHz 1700mA 0.02Ω 6000MHz
LQW2BHN5N6D13p5.6nH ±0.5nH 100MHz 35 250MHz 1500mA 0.02Ω 6000MHz
LQW2BHN6N8D13p6.8nH ±0.5nH 100MHz 35 250MHz 1400mA 0.02Ω 5400MHz
LQW2BHN8N6D13p8.6nH ±0.5nH 100MHz 35 250MHz 1300mA 0.03Ω 3900MHz
LQW2BHN10NJ13p10nH ±5% 100MHz 35 250MHz 1320mA 0.03Ω 3300MHz
LQW2BHN12NK13p12nH ±10% 100MHz 40 250MHz 1100mA 0.04Ω 3200MHz
LQW2BHN15NK13p15nH ±10% 100MHz 40 250MHz 1000mA 0.04Ω 3100MHz
LQW2BHN18NK13p18.8nH ±10% 100MHz 40 250MHz 1000mA 0.05Ω 2600MHz
LQW2BHN21NK13p21nH ±10% 100MHz 40 250MHz 950mA 0.05Ω 2200MHz
LQW2BHN27NK13p27nH ±10% 100MHz 40 250MHz 900mA 0.06Ω 1800MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
285
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW2UAS_00 Series 1008 (2520) inch (mm)
Appearance/Dimensions
2.45±0.22.62±0.3
1.83±0.2
2.3±0.2
0.6±0.1
0.25±0.15
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 2000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW2UAS12NG00p12nH ±2% 50MHz 50 500MHz 1000mA 0.09Ω 3300MHz
LQW2UAS12NJ00p12nH ±5% 50MHz 50 500MHz 1000mA 0.09Ω 3300MHz
LQW2UAS18NG00p18nH ±2% 50MHz 50 350MHz 1000mA 0.11Ω 2500MHz
LQW2UAS18NJ00p18nH ±5% 50MHz 50 350MHz 1000mA 0.11Ω 2500MHz
LQW2UAS22NF00p22nH ±1% 50MHz 55 350MHz 1000mA 0.12Ω 2400MHz
LQW2UAS22NG00p22nH ±2% 50MHz 55 350MHz 1000mA 0.12Ω 2400MHz
LQW2UAS22NJ00p22nH ±5% 50MHz 55 350MHz 1000mA 0.12Ω 2400MHz
LQW2UAS27NG00p27nH ±2% 50MHz 55 350MHz 1000mA 0.13Ω 1600MHz
LQW2UAS27NJ00p27nH ±5% 50MHz 55 350MHz 1000mA 0.13Ω 1600MHz
LQW2UAS33NF00p33nH ±1% 50MHz 60 350MHz 1000mA 0.14Ω 1600MHz
LQW2UAS33NG00p33nH ±2% 50MHz 60 350MHz 1000mA 0.14Ω 1600MHz
LQW2UAS33NJ00p33nH ±5% 50MHz 60 350MHz 1000mA 0.14Ω 1600MHz
LQW2UAS39NF00p39nH ±1% 50MHz 60 350MHz 1000mA 0.15Ω 1500MHz
LQW2UAS39NG00p39nH ±2% 50MHz 60 350MHz 1000mA 0.15Ω 1500MHz
LQW2UAS39NJ00p39nH ±5% 50MHz 60 350MHz 1000mA 0.15Ω 1500MHz
LQW2UAS47NF00p47nH ±1% 50MHz 65 350MHz 1000mA 0.16Ω 1500MHz
LQW2UAS47NG00p47nH ±2% 50MHz 65 350MHz 1000mA 0.16Ω 1500MHz
LQW2UAS47NJ00p47nH ±5% 50MHz 65 350MHz 1000mA 0.16Ω 1500MHz
LQW2UAS56NF00p56nH ±1% 50MHz 65 350MHz 1000mA 0.18Ω 1300MHz
LQW2UAS56NG00p56nH ±2% 50MHz 65 350MHz 1000mA 0.18Ω 1300MHz
LQW2UAS56NJ00p56nH ±5% 50MHz 65 350MHz 1000mA 0.18Ω 1300MHz
LQW2UAS68NF00p68nH ±1% 50MHz 65 350MHz 1000mA 0.2Ω 1300MHz
LQW2UAS68NG00p68nH ±2% 50MHz 65 350MHz 1000mA 0.2Ω 1300MHz
LQW2UAS68NJ00p68nH ±5% 50MHz 65 350MHz 1000mA 0.2Ω 1300MHz
LQW2UAS82NF00p82nH ±1% 50MHz 60 350MHz 1000mA 0.22Ω 1000MHz
LQW2UAS82NG00p82nH ±2% 50MHz 60 350MHz 1000mA 0.22Ω 1000MHz
LQW2UAS82NJ00p82nH ±5% 50MHz 60 350MHz 1000mA 0.22Ω 1000MHz
LQW2UASR10F00p100nH ±1% 25MHz 60 350MHz 650mA 0.56Ω 1000MHz
LQW2UASR10G00p100nH ±2% 25MHz 60 350MHz 650mA 0.56Ω 1000MHz
LQW2UASR10J00p100nH ±5% 25MHz 60 350MHz 650mA 0.56Ω 1000MHz
LQW2UASR12F00p120nH ±1% 25MHz 60 350MHz 650mA 0.63Ω 950MHz
LQW2UASR12G00p120nH ±2% 25MHz 60 350MHz 650mA 0.63Ω 950MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
286
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW2UASR12J00p120nH ±5% 25MHz 60 350MHz 650mA 0.63Ω 950MHz
LQW2UASR15F00p150nH ±1% 25MHz 45 100MHz 580mA 0.7Ω 850MHz
LQW2UASR15G00p150nH ±2% 25MHz 45 100MHz 580mA 0.7Ω 850MHz
LQW2UASR15J00p150nH ±5% 25MHz 45 100MHz 580mA 0.7Ω 850MHz
LQW2UASR18F00p180nH ±1% 25MHz 45 100MHz 620mA 0.77Ω 750MHz
LQW2UASR18G00p180nH ±2% 25MHz 45 100MHz 620mA 0.77Ω 750MHz
LQW2UASR18J00p180nH ±5% 25MHz 45 100MHz 620mA 0.77Ω 750MHz
LQW2UASR22F00p220nH ±1% 25MHz 45 100MHz 500mA 0.84Ω 700MHz
LQW2UASR22G00p220nH ±2% 25MHz 45 100MHz 500mA 0.84Ω 700MHz
LQW2UASR22J00p220nH ±5% 25MHz 45 100MHz 500mA 0.84Ω 700MHz
LQW2UASR27F00p270nH ±1% 25MHz 45 100MHz 500mA 0.91Ω 600MHz
LQW2UASR27G00p270nH ±2% 25MHz 45 100MHz 500mA 0.91Ω 600MHz
LQW2UASR27J00p270nH ±5% 25MHz 45 100MHz 500mA 0.91Ω 600MHz
LQW2UASR33F00p330nH ±1% 25MHz 45 100MHz 450mA 1.05Ω 570MHz
LQW2UASR33G00p330nH ±2% 25MHz 45 100MHz 450mA 1.05Ω 570MHz
LQW2UASR33J00p330nH ±5% 25MHz 45 100MHz 450mA 1.05Ω 570MHz
LQW2UASR39F00p390nH ±1% 25MHz 45 100MHz 470mA 1.12Ω 500MHz
LQW2UASR39G00p390nH ±2% 25MHz 45 100MHz 470mA 1.12Ω 500MHz
LQW2UASR39J00p390nH ±5% 25MHz 45 100MHz 470mA 1.12Ω 500MHz
LQW2UASR47F00p470nH ±1% 25MHz 45 100MHz 470mA 1.19Ω 450MHz
LQW2UASR47G00p470nH ±2% 25MHz 45 100MHz 470mA 1.19Ω 450MHz
LQW2UASR47J00p470nH ±5% 25MHz 45 100MHz 470mA 1.19Ω 450MHz
LQW2UASR56F00p560nH ±1% 25MHz 45 100MHz 400mA 1.33Ω 415MHz
LQW2UASR56G00p560nH ±2% 25MHz 45 100MHz 400mA 1.33Ω 415MHz
LQW2UASR56J00p560nH ±5% 25MHz 45 100MHz 400mA 1.33Ω 415MHz
LQW2UASR62F00p620nH ±1% 25MHz 45 100MHz 300mA 1.4Ω 375MHz
LQW2UASR62G00p620nH ±2% 25MHz 45 100MHz 300mA 1.4Ω 375MHz
LQW2UASR62J00p620nH ±5% 25MHz 45 100MHz 300mA 1.4Ω 375MHz
LQW2UASR68F00p680nH ±1% 25MHz 45 100MHz 400mA 1.47Ω 375MHz
LQW2UASR68G00p680nH ±2% 25MHz 45 100MHz 400mA 1.47Ω 375MHz
LQW2UASR68J00p680nH ±5% 25MHz 45 100MHz 400mA 1.47Ω 375MHz
LQW2UASR75F00p750nH ±1% 25MHz 45 100MHz 360mA 1.54Ω 360MHz
LQW2UASR75G00p750nH ±2% 25MHz 45 100MHz 360mA 1.54Ω 360MHz
LQW2UASR75J00p750nH ±5% 25MHz 45 100MHz 360mA 1.54Ω 360MHz
LQW2UASR82F00p820nH ±1% 25MHz 45 100MHz 400mA 1.61Ω 350MHz
LQW2UASR82G00p820nH ±2% 25MHz 45 100MHz 400mA 1.61Ω 350MHz
LQW2UASR82J00p820nH ±5% 25MHz 45 100MHz 400mA 1.61Ω 350MHz
LQW2UASR91F00p910nH ±1% 25MHz 35 50MHz 380mA 1.68Ω 320MHz
LQW2UASR91G00p910nH ±2% 25MHz 35 50MHz 380mA 1.68Ω 320MHz
LQW2UASR91J00p910nH ±5% 25MHz 35 50MHz 380mA 1.68Ω 320MHz
LQW2UAS1R0F00p1000nH ±1% 25MHz 35 50MHz 370mA 1.75Ω 290MHz
LQW2UAS1R0G00p1000nH ±2% 25MHz 35 50MHz 370mA 1.75Ω 290MHz
LQW2UAS1R0J00p1000nH ±5% 25MHz 35 50MHz 370mA 1.75Ω 290MHz
LQW2UAS1R2J00p1200nH ±5% 7.9MHz 35 50MHz 310mA 2.0Ω 210MHz
LQW2UAS1R5J00p1500nH ±5% 7.9MHz 28 50MHz 330mA 2.3Ω 120MHz
LQW2UAS1R8J00p1800nH ±5% 7.9MHz 28 50MHz 300mA 2.6Ω 140MHz
LQW2UAS2R2J00p2200nH ±5% 7.9MHz 28 50MHz 280mA 2.8Ω 130MHz
LQW2UAS2R7J00p2700nH ±5% 7.9MHz 22 25MHz 290mA 3.2Ω 110MHz
LQW2UAS3R3J00p3300nH ±5% 7.9MHz 22 25MHz 290mA 3.4Ω 90MHz
LQW2UAS3R9J00p3900nH ±5% 7.9MHz 20 25MHz 260mA 3.6Ω 70MHz
LQW2UAS4R7J00p4700nH ±5% 7.9MHz 20 25MHz 260mA 4.0Ω 60MHz
Operating temp. range (Self-temp. rise not included): -55 to 125°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
287
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
288
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW21HN_00 Series 0805 (2012) inch (mm)
Appearance/Dimensions
2.0±0.2
0.9±0.1
1.2±0.2
0.45±0.1
0.15±0.1
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 500
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current Max. of DC Resistance S.R.F.* (min.)
LQW21HNR47J00p0.47μH ±5% 10MHz 35 100MHz 160mA 1.30Ω 620MHz
LQW21HNR56J00p0.56μH ±5% 10MHz 35 100MHz 150mA 1.43Ω 580MHz
LQW21HNR68J00p0.68μH ±5% 10MHz 35 100MHz 130mA 2.21Ω 520MHz
LQW21HNR82J00p0.82μH ±5% 10MHz 35 100MHz 125mA 2.34Ω 480MHz
LQW21HN1R0J00p1.0μH ±5% 10MHz 35 100MHz 115mA 2.86Ω 450MHz
LQW21HN1R2J00p1.2μH ±5% 10MHz 35 100MHz 100mA 3.12Ω 400MHz
LQW21HN1R5J00p1.5μH ±5% 10MHz 35 100MHz 85mA 5.33Ω 350MHz
LQW21HN1R8J00p1.8μH ±5% 10MHz 35 100MHz 80mA 5.85Ω 320MHz
LQW21HN2R2J00p2.2μH ±5% 10MHz 35 100MHz 75mA 6.50Ω 300MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
289
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors
LQW31HN_03 Series 1206 (3216) inch (mm)
Appearance/Dimensions
1.6±0.22.3±0.2
1.8±0.2
0.7 min. 0.7 min. 0.7 min.
1.6±0.23.2±0.3
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Inductance
Test Frequency Q (min.) Q Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQW31HN8N8J03p8.8nH ±5% 100MHz 50 436MHz 750mA 0.029Ω±40% 1000MHz
LQW31HN8N8K03p8.8nH ±10% 100MHz 50 436MHz 750mA 0.029Ω±40% 1000MHz
LQW31HN15NJ03p14.7nH ±5% 100MHz 60 436MHz 680mA 0.035Ω±40% 1000MHz
LQW31HN15NK03p14.7nH ±10% 100MHz 60 436MHz 680mA 0.035Ω±40% 1000MHz
LQW31HN17NJ03p17nH ±5% 100MHz 60 436MHz 650mA 0.037Ω±40% 1000MHz
LQW31HN17NK03p17nH ±10% 100MHz 60 436MHz 650mA 0.037Ω±40% 1000MHz
LQW31HN23NJ03p23nH ±5% 100MHz 60 436MHz 590mA 0.046Ω±40% 1000MHz
LQW31HN23NK03p23nH ±10% 100MHz 60 436MHz 590mA 0.046Ω±40% 1000MHz
LQW31HN27NJ03p27nH ±5% 100MHz 60 436MHz 560mA 0.051Ω±40% 1000MHz
LQW31HN27NK03p27nH ±10% 100MHz 60 436MHz 560mA 0.051Ω±40% 1000MHz
LQW31HN33NJ03p33nH ±5% 100MHz 60 436MHz 530mA 0.057Ω±40% 1000MHz
LQW31HN33NK03p33nH ±10% 100MHz 60 436MHz 530mA 0.057Ω±40% 1000MHz
LQW31HN39NJ03p39nH ±5% 100MHz 60 436MHz 490mA 0.067Ω±40% 1000MHz
LQW31HN39NK03p39nH ±10% 100MHz 60 436MHz 490mA 0.067Ω±40% 1000MHz
LQW31HN47NJ03p47nH ±5% 100MHz 60 436MHz 380mA 0.11Ω±40% 1000MHz
LQW31HN47NK03p47nH ±10% 100MHz 60 436MHz 380mA 0.11Ω±40% 1000MHz
LQW31HN56NJ03p56nH ±5% 100MHz 60 436MHz 330mA 0.14Ω±40% 1000MHz
LQW31HN56NK03p56nH ±10% 100MHz 60 436MHz 330mA 0.14Ω±40% 1000MHz
LQW31HN64NJ03p64nH ±5% 100MHz 60 436MHz 290mA 0.18Ω±40% 1000MHz
LQW31HN64NK03p64nH ±10% 100MHz 60 436MHz 290mA 0.18Ω±40% 1000MHz
LQW31HN84NJ03p84nH ±5% 100MHz 60 436MHz 240mA 0.28Ω±40% 1000MHz
LQW31HN84NK03p84nH ±10% 100MHz 60 436MHz 240mA 0.28Ω±40% 1000MHz
LQW31HNR10J03p100nH ±5% 100MHz 60 436MHz 230mA 0.3Ω±40% 900MHz
LQW31HNR10K03p100nH ±10% 100MHz 60 436MHz 230mA 0.3Ω±40% 900MHz
Operating temp. range (Self-temp. rise not included): -40 to 85°C
*S.R.F.: Self-Resonant Frequency
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
290
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.) Q-Frequency Characteristics (Typ.)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
291
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors !Caution/Notice
Rating
Storage and Operating Condition
Handling
1. About the Rated Current
Do not use products beyond the rated current as this may
create excessive heat and deteriorate the insulation
resistance.
2. About Excessive Surge Current
Surge current (pulse current or rush current) greater than
the specified rated current applied to the product may
cause a critical failure, such as an open circuit or burnout
caused by excessive temperature rise.
Please contact us in advance if applying a surge current.
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
<Storage Requirements>
1. Storage Period
The LQG series should be used within 6 months; the other
products should be used within 12 months.
Check solderability if this period is exceeded.
2. Storage Conditions
(1) Store products in a warehouse in compliance with the
following conditions:
Temperature: -10 to +40 degrees C.
Humidity: 15 to 85% (relative humidity)
Do not subject products to rapid changes in
temperature and humidity.
Do not store them in a chemical atmosphere such as
one containing sulfurous acid gas or alkaline gas.
This will prevent electrode oxidation, which causes
poor solderability and possible corrosion of inductors.
(2) Do not store products in bulk packaging to prevent
collision among inductors, which causes core chipping
and wire breakage.
(3) Store products on pallets to protect from humidity,
dust, etc.
(4) Avoid heat shock, vibration, direct sunlight, etc.
This item is designed to have sucient strength, but handle
with care to avoid chipping or breaking its ceramic
structure.
LQW_A/LQW_H series
a To prevent breaking the wire, avoid touching with sharp
materials, such as tweezers or the bristles of a cleaning
brush, to the wire wound portion.
a To prevent breaking the core, avoid applying excessive
mechanical shock to products mounted on the board.
a In some mounting machines, when picking up
components, a support pin pushes the components up
from the bottom of the base tape. In this case, please
remove the support pin. The support pin may damage
the components and break the wire.
a In rare cases, the laser recognition cannot recognize
this component. Please contact us when you use laser
recognizion. (There is no problem with the permeation
and reflection type.)
LQH_H series
a To prevent breaking the wire, avoid touching with sharp
materials, such as tweezers or the bristles of a cleaning
brush, to the wire wound portion of this product.
a To prevent breaking the core, avoid applying excessive
mechanical shock to products mounted on the board.
LQG,LQP series (except LQP02_02/LQP03_02)
a The pattern of the chip Inductors is covered with
protective film. Take care to avoid damaging the chip
Inductors when handling it with pick-up nozzles, sharp
instruments, etc.
<Transportation>
Do not apply excessive vibration or mechanical shock to
products.
Continued on the following page.
!Caution
Notice
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
292
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Measuring Method
RF Inductors Soldering and Mounting
Measuring Method of Inductance/Q
1. Residual elements and stray elements of test fixtures can
be described by F-parameter as shown in the following:
3. Thus, the relation between Zx and Zm is shown in the
following:
<Resin Coating>
When coating products with resin, the relatively high resin
curing stress may change inductance values.
For exterior coating, select resin carefully so that
electrical and mechanical performance of the product is
not aected. Prior to use, please evaluate reliability with
the product mounted in your application set.
(LQW, LQH series)
An open circuit issue may occur by mechanical stress
caused by the resin, amount/cured shape of resin, or
operating conditions, etc. Some resins containing
impurities or chloride may possibly generate chlorine by
hydrolysis under some operating conditions, causing
corrosion of the inductor wire and leading to an open
circuit.
(LQP02_02/LQP03_02)
When products are coated with resin, please contact us in
advance.
<Handling of a Substrate>
Aer mounting products on a substrate, do not apply any
stress to the product caused by bending or twisting the
substrate when cropping the substrate, inserting and
removing a connector from the substrate, or tightening a
screw to the substrate.
Excessive mechanical stress may cause cracking in the
Product.
Bending Twisting
*Residual inductance of short chip
0nH
0.110nH
0.464nH
0.480nH
0.556nH
0.771nH
LQG15H/LQP03TG
LQP02HQ/LQP02TN/LQP02TQ
LQW04AN
LQP03HQ/LQP03TN_02/LQW03AW
LQG15HN, LQW15A, LQP15M
LQG18H, LQP18M, LQW18A,LQW21H/LQW2BAN
Residual
Inductance Series
2. The impedance of chip Inductors (chip coils) Zx and
measured value Zm can be described by input/output
current/voltage.
4. Lx and Qx should be calculated with the following
equation.
Please contact us for LQW18AS, LQW2BAS, LQW2UAS,
because they are dierent from other inductors regarding
the inductance calculation method.
V1A
=B
I1CD
V2
I2
AB
CD
Zm Zx
V1V2
I1I2
ProductTest fixtureTest Head
V1
I1,
Zm = V2
I2
Zx =
Zm - β
1 - ZmΓ
Zx = α
where, α = D / A = 1
β = B / D = Zsm - (1 - Yom Zsm) Zss
Γ = C / A = Yom
Zsm: measured impedance of short chip
Zss: residual impedance of short chip*
Yom: measured admittance when opening the fixture
Lx: Inductance of chip Inductors (chip coils)
Qx: Q of chip Inductors (chip coils)
f: Measuring frequency
,
Im (Zx)
2πf
Lx = Im (Zx)
Re (Zx)
Qx =
Continued from the preceding page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
293
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors Soldering and Mounting
Continued on the following page.
A high Q value is achieved when the PCB electrode land
pattern is designed so that it does not project beyond the
chip Inductor's (chip coil's) electrode.
1. Standard Land Pattern Dimensions
(1) Soldering method
Chip Inductors (Chip coils) can be flow or reflow
soldered.
Please contact Murata regarding other soldering
methods.
For LQG, LQP,
LQW03A/04A/15A/18A/21H/2BA/2UA series,
please use reflow soldering.
Solder: Use Sn-3.0Ag-0.5Cu solder.
Flux: Use rosin-based flux, but not strongly acidic flux
(with chlorine content exceeding 0.2wt%).
Do not use water-soluble flux.
The flux used for the LQW03/04/15/18/21/2BA/
2UA series should be a rosin-based flux that includes
a middle activator equivalent to 0.06wt% to 0.1wt%
chlorine.
For additional mounting methods, please contact Murata.
2. Standard Soldering Conditions
LQG15H
LQG18H
LQP02TN
LQP02TQ
LQP03T
LQP15M
LQP18M
LQW03A
LQW04A
LQW15A
LQW18A
LQW21H
LQW2BH
LQW2BA
LQW2UA
LQW31H
LQH31H
Standard Land DimensionsSeries
Attention should be paid to potential magnetic coupling eects when using the Inductor (coil) as a resonator.
Part Number a b c
LQG15H
LQG18H
LQP02TN
LQP02HQ/TQ
LQP03HQ
LQP03TN/TG/PN
LQP03TQ
LQP15M
LQP18M
LQW03A
LQW04A
LQW15A_00/10
LQW15A_80
LQW18AN_00/10/
AS_00
LQW18A_80
LQW21H
LQW2BH
LQW2BA
LQW2UA
LQH31H
LQW31H
0.5 to 0.6
0.6 to 0.8
0.2 to 0.23
0.16
0.25 to 0.3
0.2 to 0.3
0.25
0.5 to 0.6
0.6 to 0.8
0.4
0.4
0.65
0.66
0.7 to 1.0
1.15
1.2
1.2
1.78
2.54
1.5
1.4 to 1.5
1.8 to 2.2
0.4 to 0.56
0.56
0.9
0.8 to 0.9
0.9
1.4 to 1.5
1.8 to 2.2
0.65
1.0
1.2
1.42
1.9 to 2.0
2.0
2.6
3.0
2.8
3.3
4.5
0.4
0.6 to 0.8
0.16 to 0.2
0.2
0.3
0.2 to 0.3
0.3
0.4
0.7 to 0.9
0.23
0.4
0.5
0.6
0.6 to 0.8
0.86
1.0
0.8
0.76
1.27
1.0
(in mm)
Land PatternLand Pattern + Solder Resist Solder Resist
a
c
b
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
294
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors Soldering and Mounting
Continued on the following page.
(2) Soldering profile
LQW2BH/31H
LQH31H
LQG15H/18H
LQW03A/04A/15A/18A/21H
LQW2BA/2UA
LQP02T/03T/15M/18M
LQW2BH/31H
LQH31H
(3) Reworking with a Soldering Iron
*Except for LQP02T/LQW04AN/03AW/15AN_80
Series
Preheating at 150°C for 1 minute is required. Do not
directly touch the ceramic element with the tip of the
soldering iron. The reworking soldering conditions are
as follows:
Soldering iron power output: 80W max.
Temperature of soldering iron tip: 350°C
Diameter of soldering iron end: 3.0mm max.
Soldering time: within 3 s
Please keep the fix time with the soldering iron within
2 times.
oReflow Soldering profile
(Sn-3.0Ag-0.5Cu solder)
oFlow Soldering profile
(Sn-3.0Ag-0.5Cu solder)
Series Pre-heating Standard Profile Limit Profile
Heating
Temp. (T1) Temp. (T2)
Time. (t1)
150°C 60s min. 250°C 4 to 6s 2 times
max. 5s max. 2 times
max.
265±3°C
Time. (t2)
Heating
Cycle
of flow Temp. (T3) Time. (t2)
Cycle
of flow
Series
Standard Profile Limit Profile
Heating
Temp. (T1) Time. (t1)
220°C 30 to 60s 245±3°C 2 times
max. 230°C 260°C/10s 2 times
max.
60s max.
Heating
Peak
temperature
(T2)
Peak
temperature
(T4)
Cycle
of reflow Temp. (T3) Time. (t2)
Cycle
of reflow
Continued from the preceding page.
T1
T3
T2
Temperature (°C)
Pre-heating
time (s)
t2
Heating Limit Profile
Standard Profile
t1
150
180
T2
T4
T3
T1
Temperature (°C)
90±30s time (s)
t2
t1
Limit Profile
Standard Profile
Pre-heating
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
295
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors Soldering and Mounting
Continued from the preceding page.
Continued on the following page.
(1) Land Pattern Dimensions
Large lands reduce the Q of the mounted chip. Also,
large protruding land areas (bordered by lines having
the dimensions "c" and "d" shown) cause floating and
electrode leaching.
(2) Land Pattern Designing (LQW series)
Please follow the recommended patterns.
Otherwise, their performance, which includes
electrical performance or solderability, may be
aected, or result in “position shi” in the soldering
process.
(3) PCB Warping
The PCB should be designed so that products are not
subjected to mechanical stress caused by warping the
board.
3. Mounting Instructions
Poor example
Products should be located in a sideways direction
(Length: a<b) to mechanical stress.
Good example
a
b
d
c
Land Solder Resist
Poor example
The electrode part of the product should be located
as in the figure to avoid mechanical stress.
Good example
electrode
electrode
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
296
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors Soldering and Mounting
Continued from the preceding page.
(4) Amount of Solder Paste
Excessive solder causes electrode corrosion, while
insucient solder causes low electrode bonding
strength. Adjust the amount of solder paste as shown
on the right so that the correct amount is applied.
Guideline of solder paste thickness
a LQP (*Except for LQP02TN/LQP02TQ/HQ/
LQP03TQ/HQ),LQG,LQW15AN_00/
LQW15AN_10/LQW18AN/LQW21H/LQW2BA/
LQW2UA: 100 to 150μm
a LQP02TN: 50 to 80μm
a LQP02TQ/HQ: 50 to 65μm
a LQP03TQ/HQ: 100μm
a LQW03A/LQW04A: 80 to 100μm
a LQW15AN_80: 50 to 100μm
a LQW_H: 200 to 300μm
LQW15A Series:
Too much solder may cause slant or rotation of the
chip at the time of solder melting. Please reduce the
amount of solder by using a smaller solder area than
the land pattern, as shown in the figure at right.
The following conditions should be observed when
cleaning chip inductors (chip coils):
(1) Cleaning Temperature: 60°C max. (40°C max. for
alcohol cleaning agents)
(2) Ultrasonic
Output: 20W/l max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
Care should be taken not to cause resonance of the
PCB and mounted products.
4. Cleaning
(3) Cleaning agent
The following cleaning agents have been tested on
individual components. Evaluation in complete
assembly should be done prior to production.
(a) Alcohol cleaning agents
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agents
Pine Alpha ST-100S
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried aer aqueous
agents have been removed with deionized water.
For additional cleaning methods, please contact
Murata.
LQP/LQG
LQW_H
LQW_A/21H
a0.65
(in mm)
b0.35
c0.50
d0.30
1.2
Stencil Pattern
Land Pattern
Solder Resist
a
b
b
c
d
1.2
Stencil Pattern
b
b
c
d
1.2
Land Pattern
a
b
b
c
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
297
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors Packaging
Minimum Quantity and 8mm Width Taping Dimensions
Continued on the following page.
(in mm)
Paper Tape
LQG15H
LQP02TN
LQP02TQ
LQP03HQ
LQP03TN/TG/TQ *1
LQP15M
LQP18M
LQW03A
LQW04A
LQW15A_00 *2
LQW15A_10 *3
LQW15A_80
0.62
0.24
0.23
0.36
0.35
0.70
1.19
0.52
0.49
0.64/0.66/0.69
0.66/0.69
0.75
1.12
0.47
0.45
0.68
0.65/0.67
1.20
2.0
0.65
0.91
1.18
1.18
1.18
0.8 max.
0.39 max.
0.39 max.
0.55 max.
0.55 max.
0.8 max.
0.8 max.
0.75 max.
0.75 max.
0.8 max.
0.8 max.
0.8 max.
D (10000)
D (20000)
D (20000)
D (15000)
D (15000)
D (10000)
D (4000)
D (10000)
D (10000)
D (10000)
D (10000)
D (10000)
J (50000)
—
—
J (50000)
J (50000)
J (50000)
J (10000)
—
—
—
—
—
B (1000)
B (500)
B (500)
B (500)
B (500)
B (500)
B (500)
—
B (500)
B (500)
B (500)
B (500)
Embossed Tape
LQP02HQ 0.24 0.46 0.34 max. E (15000) — B (500)
Part Number abcø180mm reel ø330mm reel
Dimensions Total Thickness of Tape Packaging Code (Minimum Qty. (pcs.))
Bulk
Part Number abcø180mm reel ø330mm reel
Dimensions Total Thickness of Tape Packaging Code (Minimum Qty. (pcs.))
Bulk
2.0±0.05 4.0±0.1
aDirection of feed
<Embossed><Paper>
b
c
1.75±0.1
ø1.5 +0.1
-0
3.5±0.05
(8.0)
2.0±0.05
LQG15H,
LQP15M/18M
c
LQP02T/03T/15T,
LQW03A/04A/15A
*2 0.69 (1.5nH, 2.4 to 2.8nH, 3.9 to 4.8nH, 5.8 to 6.8nH, 8.2 to 9.9nH, 11nH, 12nH, 15nH)
0.66 (1.6 to 1.8nH, 2.9nH, 3.0nH, 3.1nH, 3.2nH, 4.9 to 5.1nH, 6.9 to 7.5nH, 10nH, 13nH, 16 to 23nH, 100nH, 120nH)
0.64 (24 to 91nH)
*3 0.69 (1.3nH, 1.4nH)
0.66 (2.2 to 8.4nH)
*1 0.67 (LQP03TG · LQP03TN_02; 0.6 to 62nH, 130 to 270nH · LQP03PN, LQP03TQ)
0.65 (LQP03TN_02; 68 to 120nH)
c
0.20±0.05
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
298
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
RF Inductors Packaging
Minimum Quantity and 8mm Width Taping Dimensions
(in mm)
Paper Tape
LQG18H
LQW18AN_00
LQW18AN_10
LQW18AN_80
LQW18AS_00
1.05
1.0
1.1
1.15
1.06
1.85
1.8
1.9
1.9
1.86
1.1 max.
1.1 max.
1.1 max.
1.1 max.
1.1 max.
D (4000)
D (4000)
D (4000)
D (4000)
D (4000)
J (10000)
J (10000)
J (10000)
J (10000)
J (10000)
B (1000)
B (500)
B (500)
B (500)
B (500)
Embossed Tape
LQP02HQ
LQH31H, LQW31H
LQW21H
LQW2BH
LQW2BA
LQW2UA
0.24
1.9
1.55
1.75
1.8
2.7
0.46
3.6
2.3
2.3
2.3
2.8
0.34 max.
2.0
1.1
2.0
1.65
2.15
L (30000)
L (2000)
L (3000)
L (2000)
L (2000)
L (2000)
—
K (7500)
—
K (7500)
—
—
B (500)
—
B (500)
—
—
—
Minimum Quantity and 4mm Width Taping Dimensions
(in mm)
Embossed Tape
LQP02HQ
LQP02TN
LQP02TQ
0.24
0.21
0.22
0.46
0.43
0.47
0.34 max.
0.23 max.
0.23 max.
L (30000)
L (40000)
L (40000)
—
—
—
B (500)
B (500)
B (500)
Continued from the preceding page.
Part Number abcø180mm reel ø330mm reel
Dimensions Total Thickness of Tape Packaging Code (Minimum Qty. (pcs.))
Bulk
Part Number abcø180mm reel ø330mm reel
Dimensions Total Thickness of Tape Packaging Code (Minimum Qty. (pcs.))
Bulk
Part Number abcø180mm reel ø330mm reel
Dimensions Depth of Cavity Packaging Code (Minimum Qty. (pcs.))
Bulk
a
b
c
Direction of feed
The dimension of the cavity of embossed tape is measured at the bottom side.
<Embossed> <Paper>
4.0±0.1 4.0±0.1
2.0±0.05
0.2
3.5±0.05
1.75±0.1
(8.0)
ø1.5
+0.1
-0
c*1: 0.3 LQW2BH
0.25 LQW21H
*1
1.0±0.02 a
ø0.8±0.04
2.0±0.04
1.8±0.02
4.0±0.05
1.0±0.02
(0.2)
Direction of feed
b
c
0.9±0.05
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
299
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
MEMO
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
300
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Product Detail p302
!Caution/Notice p415
Soldering and Mounting p416
Packaging p419
TOKO Products
Inductors for Power Lines
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
301
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201208S Series 0805 (2012) inch (mm)
Appearance/Dimensions
(in mm)
2.0±0.2
1.2±0.2
0.5±0.3
0.8 max.
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE201208S-R47Mp0.47μH ±20% 4000mA 3000mA 0.042Ω 1MHz
DFE201208S-1R0Mp1.0μH ±20% 2700mA 2100mA 0.084Ω 1MHz
DFE201208S-1R5Mp1.5μH ±20% 2300mA 1800mA 0.120Ω 1MHz
DFE201208S-2R2Mp2.2μH ±20% 1800mA 1400mA 0.204Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0 7654321
Temperature Rise Characteristics (Typ.)
2.2μH
1.5μH
0.47μH
1.0μH
0
10
20
30
40
50
60
70
0 54321
ΔT (°C)
DC Current (A)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
302
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
110
L (μH)
2.2μH
1.5μH
1.0μH 0.47μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
303
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201210S Series 0805 (2012) inch (mm)
Appearance/Dimensions
1.2±0.2
1.0 max.2.0±0.2
(in mm)
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE201210S-R47Mp0.47μH ±20% 4800mA 3400mA 0.032Ω 1MHz
DFE201210S-1R0Mp1.0μH ±20% 3200mA 2300mA 0.070Ω 1MHz
DFE201210S-1R5Mp1.5μH ±20% 2700mA 2000mA 0.096Ω 1MHz
DFE201210S-2R2Mp2.2μH ±20% 2100mA 1500mA 0.155Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0 108624
Temperature Rise Characteristics (Typ.)
0
10
0 654321
20
30
40
50
60
70
80
ΔT (°C)
DC Current (A)
2.2μH
0.47μH
1.5μH
1.0μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
304
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
0.01
0.1 101
10
1
0.1
2.2μH
1.0μH 0.47μH
1.5μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
305
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201610C Series 0806 (2016) inch (mm)
Appearance/Dimensions
1.6±0.2
1.0 max.2.0±0.2
(in mm)
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
1285AS-H-R56Mp0.56μH ±20% 2800mA 2800mA 0.059Ω 1MHz
1285AS-H-R68Mp0.68μH ±20% 2600mA 2500mA 0.072Ω 1MHz
1285AS-H-1R0Mp1.0μH ±20% 2200mA 2000mA 0.096Ω 1MHz
1285AS-H-1R5Mp1.5μH ±20% 1800mA 1600mA 0.144Ω 1MHz
1285AS-H-2R2Mp2.2μH ±20% 1500mA 1200mA 0.204Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.68μH
0.56μH
0.0
0.5
1.0
1.5
2.0
2.5
0.0 5.04.03.01.0 2.0
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.68μH
Temperature rise (°C)
1.5μH
2.2μH
1.0μH
0
5
0.0 5.04.03.02.01.0
50
10
15
20
25
30
35
40
45
0.56μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
306
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
2.2μH
110
Inductance (μH)
1.5μH
1.0μH
0.68μH
0.56μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
307
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201612C Series 0806 (2016) inch (mm)
Appearance/Dimensions
1.2 max.
(in mm)
0.5±0.3
1.6±0.2
2.0±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
1286AS-H-R47Mp0.47μH ±20% 3400mA 3200mA 0.052Ω 1MHz
1286AS-H-1R0Mp1.0μH ±20% 2500mA 2300mA 0.082Ω 1MHz
1286AS-H-1R5Mp1.5μH ±20% 2000mA 1800mA 0.114Ω 1MHz
1286AS-H-2R2Mp2.2μH ±20% 1600mA 1300mA 0.192Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0.0 5.04.03.01.0 2.0
Temperature Rise Characteristics (Typ.)
2.2μH
1.0μH
0.47μH
1.5μH
DC Current (A)
Temperature rise (°C)
0
5
0.0 5.04.03.02.01.0
50
10
15
20
25
30
35
40
45
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
308
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
110
Inductance (μH)
2.2μH
1.5μH
1.0μH
0.47μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
309
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252008C Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
2.5±0.2
2.0±0.2
0.6±0.2
0.8 max.
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE252008C-R47Mp0.47μH ±20% 3000mA 2000mA 0.060Ω 1MHz
DFE252008C-1R0Mp1.0μH ±20% 2300mA 1400mA 0.084Ω 1MHz
DFE252008C-1R5Mp1.5μH ±20% 2000mA 1200mA 0.126Ω 1MHz
DFE252008C-2R2Mp2.2μH ±20% 1600mA 950mA 0.180Ω 1MHz
DFE252008C-3R3Mp3.3μH ±20% 1300mA 850mA 0.252Ω 1MHz
DFE252008C-4R7Mp4.7μH ±20% 1100mA 650mA 0.438Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
3.3μH
2.2μH
1.5μH
1.0μH
0.47μH
0
0.5
0 54321
5
1
1.5
2
2.5
3
3.5
4
4.5
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
0
10
20
30
40
50
0 4321
3.3μH
2.2μH
1.5μH
1.0μH
0.47μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
310
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
4.7μH
1.0 10.0
Inductance (μH)
3.3μH 2.2μH
1.5μH 1.0μH
0.47μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
311
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252010C Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
1.0 max.
2.5±0.2
2.0±0.2
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
1269AS-H-R47Mp0.47μH ±20% 3500mA 3100mA 0.046Ω 1MHz
1269AS-H-1R0Mp1.0μH ±20% 2700mA 2500mA 0.078Ω 1MHz
1269AS-H-1R5Mp1.5μH ±20% 2100mA 1900mA 0.108Ω 1MHz
1269AS-H-2R2Mp2.2μH ±20% 1900mA 1500mA 0.156Ω 1MHz
1269AS-H-3R3Mp3.3μH ±20% 1500mA 1200mA 0.228Ω 1MHz
1269AS-H-4R7Mp4.7μH ±20% 1300mA 1000mA 0.300Ω 1MHz
1269AS-H-6R8Mp6.8μH ±20% 1100mA 760mA 0.516Ω 1MHz
1269AS-H-100Np10μH ±30% 1000mA 680mA 0.689Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH 0.47μH
0
1
0 654321
2
3
4
5
6
7
8
9
10
Temperature Rise Characteristics (Typ.)
DC Current (A)
10μH
ΔT (°C)
0
10
20
30
40
50
0 54312
6.8μH
4.7μH
1.5μH
3.3μH
2.2μH
1.0μH
0.47μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
312
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1 1.0 10.0
Inductance (μH)
10μH
2.2μH
6.8μH 4.7μH 3.3μH
1.5μH 1.0μH
0.47μH
100.0
10.0
1.0
0.1
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
313
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252012C Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
2.5±0.2 1.2 max.
2.0±0.2
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
1239AS-H-R47Mp0.47μH ±20% 3800mA 3700mA 0.039Ω 1MHz
1239AS-H-1R0Mp1.0μH ±20% 3000mA 3000mA 0.059Ω 1MHz
1239AS-H-1R5Mp1.5μH ±20% 2600mA 2400mA 0.072Ω 1MHz
1239AS-H-2R2Mp2.2μH ±20% 2200mA 2000mA 0.108Ω 1MHz
1239AS-H-3R3Mp3.3μH ±20% 1800mA 1500mA 0.144Ω 1MHz
1239AS-H-4R7Mp4.7μH ±20% 1500mA 1300mA 0.240Ω 1MHz
1239AS-H-6R0Mp6.0μH ±20% 1400mA 1100mA 0.275Ω 1MHz
1239AS-H-6R8Mp6.8μH ±20% 1300mA 1000mA 0.375Ω 1MHz
1239AS-H-100Mp10μH ±20% 1000mA 850mA 0.460Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
6.8μH
6.0μH
3.3μH
4.7μH
2.2μH 1.5μH 1.0μH
0.47μH
0
2
4
6
8
10
0 654
3
21
Temperature Rise Characteristics (Typ.)
DC Current (A)
1.5μH
ΔT (°C)
10μH
0
10
20
30
40
50
0 54312
6.8μH
6.0μH
4.7μH
3.3μH
2.2μH 1.0μH
0.47μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
314
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
1.0
Frequency (MHz)
Inductance (μH)
10μH 6.8μH
6.0μH 4.7μH
2.2μH
3.3μH
0.1 1 10
1.5μH 1.0μH 0.47μH
0.1
100.0
10.0
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
315
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE322510C Series 1210 (3225) inch (mm)
Appearance/Dimensions
(in mm)
0.6±0.2
2.5±0.2
3.2±0.2 1.0 max.
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
1276AS-H-R47Mp0.47μH ±20% 3800mA 3300mA 0.038Ω 1MHz
1276AS-H-R68Mp0.68μH ±20% 3500mA 2900mA 0.045Ω 1MHz
1276AS-H-1R0Mp1.0μH ±20% 3100mA 2600mA 0.062Ω 1MHz
1276AS-H-1R5Mp1.5μH ±20% 2600mA 2100mA 0.087Ω 1MHz
1276AS-H-2R2Mp2.2μH ±20% 2200mA 1600mA 0.118Ω 1MHz
1276AS-H-3R3Mp3.3μH ±20% 1800mA 1400mA 0.190Ω 1MHz
1276AS-H-4R7Mp4.7μH ±20% 1600mA 1200mA 0.264Ω 1MHz
1276AS-H-6R8Mp6.8μH ±20% 1300mA 1000mA 0.378Ω 1MHz
1276AS-H-100Mp10μH ±20% 1000mA 800mA 0.588Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
10μH
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH
0.68μH
0.47μH
0
2
0.00 6.005.004.003.002.001.00
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.47μH
ΔT (°C)
0
10
0 654321
100
20
30
40
50
60
70
80
90
10μH
6.8μH
4.7μH
3.3μH
2.2μH
0.68μH
1.0μH
1.5μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
316
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
10μH
2.2μH
6.8μH 4.7μH 3.3μH
0.1
0.1
1.0 10.0
1.5μH
1.0μH
0.68μH 0.47μH
100.0
10.0
1.0
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
317
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE322512C Series 1210 (3225) inch (mm)
Appearance/Dimensions
(in mm)
1.2 max.
0.6±0.2
2.5±0.2
3.2±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
1277AS-H-R47Mp0.47μH ±20% 4700mA 3700mA 0.031Ω 1MHz
1277AS-H-R68Mp0.68μH ±20% 4200mA 3500mA 0.035Ω 1MHz
1277AS-H-1R0Mp1.0μH ±20% 3700mA 3100mA 0.045Ω 1MHz
1277AS-H-1R5Mp1.5μH ±20% 3000mA 2600mA 0.065Ω 1MHz
1277AS-H-2R2Mp2.2μH ±20% 2600mA 2100mA 0.084Ω 1MHz
1277AS-H-3R3Mp3.3μH ±20% 2100mA 1800mA 0.126Ω 1MHz
1277AS-H-4R7Mp4.7μH ±20% 1800mA 1400mA 0.180Ω 1MHz
1277AS-H-6R8Mp6.8μH ±20% 1500mA 1200mA 0.276Ω 1MHz
1277AS-H-100Mp10μH ±20% 1200mA 900mA 0.420Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
4.7μH
6.8μH
3.3μH
2.2μH 1.5μH
1.0μH 0.68μH
0.47μH
0
2
0 8642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0.47μH
0
10
90
20
30
40
50
60
70
80
0 654321
6.8μH
4.7μH
3.3μH
2.2μH
0.68μH
1.0μH
1.5μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
318
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
10μH
1.5μH
6.8μH
4.7μH 3.3μH 2.2μH
0.10
0.1
1.00 10.00
1.0μH
0.68μH 0.47μH
100.0
10.0
1.0
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
319
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201610R Series 0806 (2016) inch (mm)
Appearance/Dimensions
1.6±0.2
1.0 max.2.0±0.2
(in mm)
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE201610R-H-R47Mp0.47μH ±20% 3000mA 2800mA 0.048Ω 1MHz
DFE201610R-H-1R0Mp1.0μH ±20% 2200mA 2100mA 0.079Ω 1MHz
DFE201610R-H-1R5Mp1.5μH ±20% 1800mA 1800mA 0.118Ω 1MHz
DFE201610R-H-2R2Mp2.2μH ±20% 1600mA 1400mA 0.168Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
2.2μH
1.5μH
1.0μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0.0 5.04.03.01.0 2.0
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature rise (°C)
2.2μH
0
5
0.0 5.04.03.02.01.0
50
10
15
20
25
30
35
40
45
1.5μH
1.0μH
0.47μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
320
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
110
Inductance (μH)
2.2μH
1.5μH
1.0μH 0.47μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
321
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201612R Series 0806 (2016) inch (mm)
Appearance/Dimensions
1.2 max.
(in mm)
0.5±0.3
1.6±0.2
2.0±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE201612R-H-R47Mp0.47μH ±20% 3500mA 3200mA 0.040Ω 1MHz
DFE201612R-H-1R0Mp1.0μH ±20% 2600mA 2600mA 0.070Ω 1MHz
DFE201612R-H-1R5Mp1.5μH ±20% 2100mA 2000mA 0.094Ω 1MHz
DFE201612R-H-2R2Mp2.2μH ±20% 1700mA 1400mA 0.154Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.47μH
0
0.5
1
1.5
2
2.5
0 654
3
21
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
0
5
0 54321
50
10
15
20
25
30
35
40
45
2.2μH
1.0μH
0.47μH
1.5μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
322
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
110
Inductance (μH)
2.2μH
1.0μH
1.5μH
0.47μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
323
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252010R Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
1.0 max.
2.5±0.2
2.0±0.2
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE252010R-H-1R0Mp1.0μH ±20% 3000mA 2700mA 0.068Ω 1MHz
DFE252010R-H-1R5Mp1.5μH ±20% 2300mA 2100mA 0.090Ω 1MHz
DFE252010R-H-2R2Mp2.2μH ±20% 2100mA 1700mA 0.126Ω 1MHz
DFE252010R-H-4R7Mp4.7μH ±20% 1400mA 1100mA 0.276Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
2.2μH
1.5μH
1.0μH
0
0.5
0 54321
5
1
1.5
2
2.5
3
3.5
4
4.5
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
0
10
20
30
40
50
0 4321
2.2μH
1.0μH
1.5μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
324
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
0.1 1.0 10.0
4.7μH
2.2μH
1.5μH 1.0μH
0.1
100.0
10.0
1.0
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
325
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252012R Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
2.5±0.2 1.2 max.
2.0±0.2
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE252012R-H-1R0Mp1.0μH ±20% 3400mA 3100mA 0.049Ω 1MHz
DFE252012R-H-1R5Mp1.5μH ±20% 2800mA 2500mA 0.065Ω 1MHz
DFE252012R-H-2R2Mp2.2μH ±20% 2400mA 2000mA 0.090Ω 1MHz
DFE252012R-H-4R7Mp4.7μH ±20% 1700mA 1400mA 0.216Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
4.7μH
2.2μH
1.5μH
1.0μH
0
0.5
0 654321
5
1
1.5
2
2.5
3
3.5
4
4.5
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH 1.0μH
0
10
0 54321
20
30
40
50
60
70
80
2.2μH
1.5μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
326
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
0.1 1.0 10.0
0.1
100.0
10.0
1.0
4.7μH
1.5μH
2.2μH
1.0μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
327
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201610P Series 0806 (2016) inch (mm)
Appearance/Dimensions
1.6±0.2
1.0 max.2.0±0.2
(in mm)
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE201610P-R24Mp0.24μH ±20% 5400mA 3800mA 0.026Ω 1MHz
DFE201610P-R33Mp0.33μH ±20% 4700mA 3500mA 0.034Ω 1MHz
DFE201610P-R47Mp0.47μH ±20% 4000mA 3100mA 0.040Ω 1MHz
DFE201610P-R68Mp0.68μH ±20% 3600mA 2700mA 0.048Ω 1MHz
DFE201610P-1R0Mp1.0μH ±20% 3100mA 2200mA 0.070Ω 1MHz
DFE201610P-1R5Mp1.5μH ±20% 2500mA 1800mA 0.110Ω 1MHz
DFE201610P-2R2Mp2.2μH ±20% 2000mA 1400mA 0.168Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.68μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0 654
3
21
0.33μH
0.24μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature rise (°C)
0
5
0 654321
50
10
15
20
25
30
35
40
45
2.2μH
1.5μH
1.0μH 0.68μH
0.47μH
0.33μH
0.24μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
328
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
1.0 10.0
L (μH)
2.2μH
1.5μH 1.0μH 0.68μH
0.47μH 0.33μH 0.24μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
329
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201612P Series 0806 (2016) inch (mm)
Appearance/Dimensions
1.2 max.
(in mm)
0.5±0.3
1.6±0.2
2.0±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE201612P-R24Mp0.24μH ±20% 6500mA 4400mA 0.023Ω 1MHz
DFE201612P-R33Mp0.33μH ±20% 5600mA 3900mA 0.028Ω 1MHz
DFE201612P-R47Mp0.47μH ±20% 4800mA 3700mA 0.033Ω 1MHz
DFE201612P-1R0Mp1.0μH ±20% 3300mA 2700mA 0.054Ω 1MHz
DFE201612P-1R5Mp1.5μH ±20% 2700mA 2000mA 0.095Ω 1MHz
DFE201612P-2R2Mp2.2μH ±20% 2100mA 1500mA 0.144Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.0
0.5
1.0
1.5
2.0
2.5
0.0 6.05.04.0
3.0
2.01.0
2.2μH
1.5μH
1.0μH
0.47μH 0.33μH
0.22μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.22μH
Temperature Rise (°C)
2.2μH
0
10
20
30
40
50
0.0 6.05.04.0
3.0
2.01.0
1.5μH
1.0μH
0.33μH
0.47μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
330
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
1.0 10.0
L (μH)
2.2μH
1.5μH 1.0μH
0.47μH
0.24μH
0.33μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
331
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252010P Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
1.0 max.
2.5±0.2
2.0±0.2
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE252010P-R33Mp0.33μH ±20% 5700mA 3800mA 0.029Ω 1MHz
DFE252010P-R47Mp0.47μH ±20% 5000mA 3500mA 0.035Ω 1MHz
DFE252010P-R68Mp0.68μH ±20% 4100mA 3000mA 0.048Ω 1MHz
DFE252010P-1R0Mp1.0μH ±20% 3800mA 2700mA 0.054Ω 1MHz
DFE252010P-1R2Mp1.2μH ±20% 3200mA 2400mA 0.068Ω 1MHz
DFE252010P-1R5Mp1.5μH ±20% 3000mA 2100mA 0.082Ω 1MHz
DFE252010P-2R2Mp2.2μH ±20% 2600mA 1700mA 0.115Ω 1MHz
DFE252010P-3R3Mp3.3μH ±20% 2100mA 1400mA 0.195Ω 1MHz
DFE252010P-4R7Mp4.7μH ±20% 1700mA 1100mA 0.270Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
3.3μH
2.2μH
1.5μH
1.2μH 1.0μH
0.68μH 0.47μH
0.33μH
0
1
2
3
4
5
0 12108
6
42
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
0
10
20
30
40
50
0 54312
3.3μH
2.2μH
1.5μH
0.47μH
0.33μH
0.68μH
1.0μH
1.2μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
332
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
110
L (μH)
4.7μH
3.3μH 2.2μH 1.5μH
1.2μH 1.0μH 0.68μH 0.47μH 0.33μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
333
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252012P Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
2.5±0.2 1.2 max.
2.0±0.2
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE252012P-R33Mp0.33μH ±20% 6600mA 4600mA 0.023Ω 1MHz
DFE252012P-R47Mp0.47μH ±20% 5700mA 4000mA 0.027Ω 1MHz
DFE252012P-R68Mp0.68μH ±20% 4800mA 3500mA 0.037Ω 1MHz
DFE252012P-1R0Mp1.0μH ±20% 4300mA 3200mA 0.042Ω 1MHz
DFE252012P-1R5Mp1.5μH ±20% 3500mA 2600mA 0.060Ω 1MHz
DFE252012P-2R2Mp2.2μH ±20% 3000mA 2200mA 0.084Ω 1MHz
DFE252012P-3R3Mp3.3μH ±20% 2300mA 1700mA 0.140Ω 1MHz
DFE252012P-4R7Mp4.7μH ±20% 2000mA 1400mA 0.200Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH 0.68μH 0.47μH
0.33μH
0
2
4
6
8
10
0 12108
6
42
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
3.3μH
2.2μH
1.5μH
1.0μH
0.68μH
0.47μH
0.33μH
0
10
20
30
40
50
0 654
3
21
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
334
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
4.7μH
1.0μH
3.3μH 2.2μH 1.5μH
0.1 1 10
0.68μH 0.47μH 0.33μH
0.1
100
10
1
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
335
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201610E Series 0806 (2016) inch (mm)
Appearance/Dimensions
1.6±0.2
1.0 max.2.0±0.2
(in mm)
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE201610E-R24Mp0.24μH ±20% 6300mA 4700mA 0.020Ω 1MHz
DFE201610E-R33Mp0.33μH ±20% 5500mA 4000mA 0.026Ω 1MHz
DFE201610E-R47Mp0.47μH ±20% 4800mA 3600mA 0.032Ω 1MHz
DFE201610E-R68Mp0.68μH ±20% 4300mA 3100mA 0.043Ω 1MHz
DFE201610E-1R0Mp1.0μH ±20% 3600mA 2700mA 0.057Ω 1MHz
DFE201610E-1R5Mp1.5μH ±20% 2900mA 2100mA 0.091Ω 1MHz
DFE201610E-2R2Mp2.2μH ±20% 2400mA 1700mA 0.140Ω 1MHz
DFE201610E-4R7Mp4.7μH ±20% 1600mA 1100mA 0.288Ω 1MHz
DFE201610E-100Mp10μH ±20% 1000mA 650mA 0.780Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
4.7μH
2.2μH 1.5μH
0.68μH
0.47μH
0.24μH
0.33μH
1.0μH
0
2
0 8642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
10μH
4.7μH
Temperature rise (°C)
0
10
15
5
20
30
35
25
40
45
50
0 8642
2.2μH
1.5μH
1.0μH
0.68μH
0.47μH
0.33μH
0.24μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
336
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
10μH
L (μH)
4.7μH
2.2μH 1.5μH
1.0μH 0.68μH 0.47μH 0.33μH
0.24μH
0.1
0.1 101
100
10
1
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
337
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201612E Series 0806 (2016) inch (mm)
Appearance/Dimensions
1.2 max.
(in mm)
0.5±0.3
1.6±0.2
2.0±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE201612E-R33Mp0.33μH ±20% 6300mA 4800mA 0.021Ω 1MHz
DFE201612E-R47Mp0.47μH ±20% 5500mA 4500mA 0.026Ω 1MHz
DFE201612E-R68Mp0.68μH ±20% 4300mA 3500mA 0.033Ω 1MHz
DFE201612E-1R0Mp1.0μH ±20% 4000mA 2900mA 0.048Ω 1MHz
DFE201612E-1R5Mp1.5μH ±20% 3200mA 2300mA 0.072Ω 1MHz
DFE201612E-2R2Mp2.2μH ±20% 2400mA 1800mA 0.116Ω 1MHz
DFE201612E-4R7Mp4.7μH ±20% 1800mA 1200mA 0.252Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
2.2μH
1.5μH
0.47μH
0.33μH
1.0μH0.68μH
0.0
1.0
2.0
3.0
4.0
5.0
0.0 6.05.04.0
3.0
2.01.0
Temperature Rise Characteristics (Typ.)
DC Current (A)
4.7μH
Temperature Rise (°C)
2.2μH
1.5μH
1.0μH
0.33μH
0.47μH
0.68μH
0.0
5.0
15.0
10.0
20.0
25.0
30.0
35.0
40.0
45.0
50.0
0.0 6.05.04.0
3.0
2.01.0
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
338
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
4.7μH
110
L (μH)
2.2μH
0.68μH 0.47μH 0.33μH
1.5μH 1.0μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
339
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE201210U Series 0805 (2012) inch (mm)
Appearance/Dimensions
1.2±0.2
1.0 max.2.0±0.2
(in mm)
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE201210U-R24Mp0.24μH ±20% 6500mA 3800mA 0.025Ω 1MHz
DFE201210U-R33Mp0.33μH ±20% 5200mA 3400mA 0.031Ω 1MHz
DFE201210U-R47Mp0.47μH ±20% 4400mA 3000mA 0.042Ω 1MHz
DFE201210U-R68Mp0.68μH ±20% 3600mA 2400mA 0.060Ω 1MHz
DFE201210U-1R0Mp1.0μH ±20% 3100mA 2000mA 0.095Ω 1MHz
DFE201210U-1R5Mp1.5μH ±20% 2500mA 1600mA 0.138Ω 1MHz
DFE201210U-2R2Mp2.2μH ±20% 2000mA 1200mA 0.228Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
0
0.00
0.50
1.00
1.50
2.00
2.50
0.24μH
12 4356
Inductance (μH)
0.33μH
0.68μH
0.47μH
1.0μH
1.5μH
2.2μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.47μH
2.2μH
Temperature rise (°C)
0.33μH
0.24μH
1.5μH
0
5
0 654321
50
10
15
20
25
30
35
40
1.0μH
0.68μH
45
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
340
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
2.2μH
110
Inductance (μH)
1.5μH
1.0μH
0.68μH
0.47μH 0.33μH
0.24μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
341
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252007F Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
2.5±0.2
2.0±0.2
0.6±0.2
0.7 max.
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE252007F-R47Mp0.47μH ±20% 3300mA 2700mA 0.053Ω 1MHz
DFE252007F-1R0Mp1.0μH ±20% 2800mA 2100mA 0.085Ω 1MHz
DFE252007F-1R5Mp1.5μH ±20% 2100mA 1700mA 0.132Ω 1MHz
DFE252007F-2R2Mp2.2μH ±20% 1800mA 1400mA 0.182Ω 1MHz
DFE252007F-3R3Mp3.3μH ±20% 1500mA 1200mA 0.275Ω 1MHz
DFE252007F-4R7Mp4.7μH ±20% 1200mA 940mA 0.450Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
0
0.5
0.0 7.05.0 6.04.03.02.01.0
5
Inductance (μH)
DC Current (A)
1
1.5
2
2.5
3
3.5
4
4.5
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH
0.47μH
Temperature Rise Characteristics (Typ.)
0
10
0 54321
90
ΔT (°C)
DC Current (A)
20
30
40
50
60
70
80
4.7μH
3.3μH
2.2μH
0.47μH
1.0μH
1.5μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
342
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
0.1
0.1 101
100
10
1
4.7μH 3.3μH 2.2μH
1.5μH 1.0μH 0.47μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
343
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252010F Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
1.0 max.
2.5±0.2
2.0±0.2
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE252010F-R33Mp0.33μH ±20% 6800mA 4800mA 0.021Ω 1MHz
DFE252010F-R47Mp0.47μH ±20% 6000mA 4400mA 0.027Ω 1MHz
DFE252010F-R68Mp0.68μH ±20% 5000mA 3500mA 0.037Ω 1MHz
DFE252010F-R82Mp0.82μH ±20% 4500mA 3300mA 0.040Ω 1MHz
DFE252010F-1R0Mp1.0μH ±20% 4100mA 3100mA 0.048Ω 1MHz
DFE252010F-1R5Mp1.5μH ±20% 3400mA 2500mA 0.072Ω 1MHz
DFE252010F-2R2Mp2.2μH ±20% 3100mA 2300mA 0.097Ω 1MHz
DFE252010F-3R3Mp3.3μH ±20% 2200mA 1600mA 0.170Ω 1MHz
DFE252010F-4R7Mp4.7μH ±20% 1900mA 1400mA 0.240Ω 1MHz
DFE252010F-6R8Mp6.8μH ±20% 1400mA 1100mA 0.420Ω 1MHz
DFE252010F-8R2Mp8.2μH ±20% 1350mA 1000mA 0.520Ω 1MHz
DFE252010F-100Mp10μH ±20% 1300mA 900mA 0.600Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
8.2μH
6.8μH
4.7μH
3.3μH
2.2μH
1.0μH1.5μH 0.82μH
0.68μH 0.47μH 0.33μH
0
2
3
1
4
5
6
7
8
9
10
0 1412108642
Temperature Rise Characteristics (Typ.)
DC Current (A)
10μH
ΔT (°C)
0
10
20
30
40
50
0 654
3
21
8.2μH
6.8μH
4.7μH
3.3μH
0.33μH
2.2μH
1.5μH
0.47μH
0.68μH
0.82μH
1.0μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
344
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
10μH
1.5μH
8.2μH 6.8μH
4.7μH 3.3μH 2.2μH
0.1
0.1
10
1
100
110
1.0μH 0.82μH 0.68μH 0.47μH 0.33μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
345
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE252012F Series 1008 (2520) inch (mm)
Appearance/Dimensions
(in mm)
2.5±0.2 1.2 max.
2.0±0.2
0.6±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE252012F-R33Mp0.33μH ±20% 7600mA 5100mA 0.019Ω 1MHz
DFE252012F-R47Mp0.47μH ±20% 6700mA 4900mA 0.023Ω 1MHz
DFE252012F-R68Mp0.68μH ±20% 5400mA 3900mA 0.031Ω 1MHz
DFE252012F-R82Mp0.82μH ±20% 4900mA 3600mA 0.035Ω 1MHz
DFE252012F-1R0Mp1.0μH ±20% 4700mA 3300mA 0.040Ω 1MHz
DFE252012F-1R5Mp1.5μH ±20% 3800mA 2700mA 0.058Ω 1MHz
DFE252012F-2R2Mp2.2μH ±20% 3300mA 2300mA 0.082Ω 1MHz
DFE252012F-3R3Mp3.3μH ±20% 2500mA 1800mA 0.135Ω 1MHz
DFE252012F-4R7Mp4.7μH ±20% 2100mA 1500mA 0.190Ω 1MHz
DFE252012F-6R8Mp6.8μH ±20% 1700mA 1200mA 0.330Ω 1MHz
DFE252012F-8R2Mp8.2μH ±20% 1500mA 1100mA 0.410Ω 1MHz
DFE252012F-100Mp10μH ±20% 1400mA 950mA 0.480Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
8.2μH
6.8μH
4.7μH 3.3μH
2.2μH 1.5μH
1.0μH
0.82μH
0.68μH
0
2
0
4
6
8
10
12
0.47μH
0.33μH
12 14108642
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0.33μH
0
10
20
30
40
50
0 8642
8.2μH
6.8μH
4.7μH
3.3μH
2.2μH
0.47μH
0.68μH
0.82μH
1.0μH
1.5μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
346
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
0.1 1 10
10μH 8.2μH
6.8μH 4.7μH
2.2μH
3.3μH
1.5μH 1.0μH 0.82μH 0.68μH 0.47μH 0.33μH
0.1
100
10
1
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
347
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DFE322512F Series 1210 (3225) inch (mm)
Appearance/Dimensions
(in mm)
1.2 max.
0.6±0.2
2.5±0.2
3.2±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
DFE322512F-R47Mp0.47μH ±20% 6700mA 4800mA 0.023Ω 1MHz
DFE322512F-R68Mp0.68μH ±20% 6100mA 4400mA 0.026Ω 1MHz
DFE322512F-1R0Mp1.0μH ±20% 4800mA 3800mA 0.032Ω 1MHz
DFE322512F-1R5Mp1.5μH ±20% 3900mA 3000mA 0.048Ω 1MHz
DFE322512F-2R2Mp2.2μH ±20% 3400mA 2600mA 0.066Ω 1MHz
DFE322512F-3R3Mp3.3μH ±20% 2600mA 2000mA 0.108Ω 1MHz
DFE322512F-4R7Mp4.7μH ±20% 2300mA 1600mA 0.157Ω 1MHz
DFE322512F-6R8Mp6.8μH ±20% 2000mA 1200mA 0.220Ω 1MHz
DFE322512F-100Mp10μH ±20% 1700mA 1100mA 0.324Ω 1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 20V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Resistance Hitester 3541 (HIOKI) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
10μH
6.8μH
4.7μH 3.3μH
2.2μH 1.5μH
1.0μH
0.68μH 0.47μH
0
2
1
4
6
8
3
5
7
9
10
0.0 12.010.08.0
6.0
4.02.0
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0
20
40
60
80
100
120
140
0.
6.8μH
0.47μH
3.3μH
4.7μH
2.2μH
0.68μH
1.0μH
1.5μH
7 654321
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
348
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
10μH 6.8μH 4.7μH
3.3μH
1.5μH
2.2μH
0.1
0.1
100
110
1.0μH 0.68μH 0.47μH
10
1
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
349
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDSD0412 Series 1515 (4040) inch (mm)
Appearance/Dimensions
2.0
(2.2)
0.90 0.90
4.2 max.
4.2 max.
1.2 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 4000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDSD0412-H-R33Mp0.33μH ±20% 7500mA 6400mA 0.019Ω 0.1MHz
FDSD0412-H-R47Mp0.47μH ±20% 6500mA 6000mA 0.023Ω 0.1MHz
FDSD0412-H-1R0Mp1.0μH ±20% 4700mA 4300mA 0.044Ω 0.1MHz
FDSD0412-H-1R2Mp1.2μH ±20% 4500mA 3700mA 0.048Ω 0.1MHz
FDSD0412-H-1R5Mp1.5μH ±20% 4100mA 3300mA 0.064Ω 0.1MHz
FDSD0412-H-2R2Mp2.2μH ±20% 3500mA 2800mA 0.084Ω 0.1MHz
FDSD0412-H-3R3Mp3.3μH ±20% 2800mA 2200mA 0.122Ω 0.1MHz
FDSD0412-H-4R7Mp4.7μH ±20% 2500mA 1900mA 0.161Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
4.7μH
2.2μH
3.3μH
1.5μH
1.2μH 1.0μH
0.47μH
0.33μH
0
2
0 108642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.33μH
0.47μH
Temperature Rise (°C)
4.7μH
0
20
0 108642
40
60
80
100
120
3.3μH
2.2μH
1.5μH
1.2μH 1.0μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
350
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
1.2μH
4.7μH 3.3μH
2.2μH 1.5μH
0.1
0.1
110
1.0μH
0.47μH 0.33μH
100
10
1
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
351
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDSD0415 Series 1515 (4040) inch (mm)
Appearance/Dimensions
4.2 max.
4.2 max.
2.0
0.90
(2.2)
0.90
1.5 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 4000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDSD0415-H-R22Mp0.22μH ±20% 12000mA 7700mA 0.014Ω 0.1MHz
FDSD0415-H-R47Mp0.47μH ±20% 9000mA 6100mA 0.018Ω 0.1MHz
FDSD0415-H-1R0Mp1.0μH ±20% 5300mA 4500mA 0.041Ω 0.1MHz
FDSD0415-H-1R5Mp1.5μH ±20% 5000mA 3700mA 0.047Ω 0.1MHz
FDSD0415-H-2R2Mp2.2μH ±20% 4100mA 3100mA 0.065Ω 0.1MHz
FDSD0415-H-3R3Mp3.3μH ±20% 3400mA 2600mA 0.095Ω 0.1MHz
FDSD0415-H-4R7Mp4.7μH ±20% 2900mA 2100mA 0.120Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
4.7μH
3.3μH
2.2μH
1.5μH
1.0μH
0.47μH 0.22μH
0
1.0
2.0
3.0
4.0
5.0
0.5
1.5
2.5
3.5
4.5
0 2015105
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature rise (°C)
4.7μH
0
10
20
30
40
50
0 108624
3.3μH
2.2μH
1.5μH
0.22μH
0.47μH
1.0μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
352
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1 1 10
L (μH)
4.7μH
1.0μH 0.47μH 0.22μH
3.3μH 2.2μH 1.5μH
0.1
1
10
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
353
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDSD0420 Series 1515 (4040) inch (mm)
Appearance/Dimensions
4.2 max.
4.2 max.
2.0
0.90
(2.2)
0.90
2.0 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDSD0420-H-R33Mp0.33μH ±20% 11000mA 7700mA 0.014Ω 0.1MHz
FDSD0420-H-R47Mp0.47μH ±20% 9400mA 6800mA 0.018Ω 0.1MHz
FDSD0420-H-R68Mp0.68μH ±20% 8300mA 6500mA 0.022Ω 0.1MHz
FDSD0420-H-1R0Mp1.0μH ±20% 6800mA 5100mA 0.029Ω 0.1MHz
FDSD0420-H-1R5Mp1.5μH ±20% 5700mA 4300mA 0.036Ω 0.1MHz
FDSD0420-H-2R2Mp2.2μH ±20% 4100mA 3600mA 0.047Ω 0.1MHz
FDSD0420-H-3R3Mp3.3μH ±20% 3700mA 2900mA 0.071Ω 0.1MHz
FDSD0420-H-4R7Mp4.7μH ±20% 3600mA 2700mA 0.083Ω 0.1MHz
FDSD0420-H-6R8Mp6.8μH ±20% 2700mA 1900mA 0.150Ω 0.1MHz
FDSD0420-H-100Mp10μH ±20% 2500mA 1700mA 0.200Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH
1.0μH
0.68μH 0.47μH
0.33μH
0
2
0 108642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
10μH
Temperature Rise (°C)
0
20
0 108642
40
60
80
100
120
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH
0.33μH
0.47μH
0.68μH
1.0μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
354
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.01
1
0.1
10
110
L (μH)
10μH
1.5μH
6.8μH 4.7μH 3.3μH 2.2μH
1.0μH 0.68μH 0.47μH 0.33μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
355
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDSD0512 Series 2019 (5249) inch (mm)
Appearance/Dimensions
4.9
2.5
1.35 5.2
(2.5)
1.35
1.2 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 4000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDSD0512-H-1R0Mp1.0μH ±20% 6100mA 4000mA 0.044Ω 0.1MHz
FDSD0512-H-K2R2Mp2.2μH ±20% 4200mA 3200mA 0.068Ω 0.1MHz
FDSD0512-H-4R7Mp4.7μH ±20% 3000mA 2000mA 0.180Ω 0.1MHz
FDSD0512-H-6R8Mp6.8μH ±20% 2300mA 1700mA 0.210Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
6.8μH
Inductance (μH)
4.7μH
2.2μH
1.0μH
0
1
2
3
4
5
6
7
0 8642
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
6.8μH
0
10
20
30
40
50
0 654
3
21
4.7μH
1.0μH
2.2μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
356
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
110
Inductance (μH)
6.8μH
2.2μH
4.7μH
1.0μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
357
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDSD0515 Series 2019 (5249) inch (mm)
Appearance/Dimensions
4.9
2.5
1.35 5.2
(2.5)
1.35
1.5 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 4000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDSD0515-H-1R0Mp1.0μH ±20% 7000mA 5200mA 0.030Ω 0.1MHz
FDSD0515-H-2R2Mp2.2μH ±20% 4800mA 3400mA 0.059Ω 0.1MHz
FDSD0515-H-3R3Mp3.3μH ±20% 3800mA 3000mA 0.075Ω 0.1MHz
FDSD0515-H-4R7Mp4.7μH ±20% 3200mA 2600mA 0.100Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
3.3μH
2.2μH
1.0μH
0
1
0 108642
2
3
4
5
6
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
0
10
20
30
40
50
0 7531
3.3μH
2.2μH
1.0μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
358
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
110
Inductance (μH)
4.7μH
2.2μH 1.0μH
3.3μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
359
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDSD0518 Series 2019 (5249) inch (mm)
Appearance/Dimensions
4.9
2.5
1.35 5.2
(2.5)
1.35
1.8 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDSD0518-H-R68Mp0.68μH ±20% 9000mA 6800mA 0.019Ω 0.1MHz
FDSD0518-H-1R0Mp1.0μH ±20% 8700mA 6100mA 0.021Ω 0.1MHz
FDSD0518-H-1R5Mp1.5μH ±20% 6700mA 5300mA 0.029Ω 0.1MHz
FDSD0518-H-2R2Mp2.2μH ±20% 5400mA 4300mA 0.040Ω 0.1MHz
FDSD0518-H-3R3Mp3.3μH ±20% 4600mA 3400mA 0.058Ω 0.1MHz
FDSD0518-H-4R7Mp4.7μH ±20% 3900mA 3000mA 0.073Ω 0.1MHz
FDSD0518-H-6R8Mp6.8μH ±20% 2900mA 2600mA 0.106Ω 0.1MHz
FDSD0518-H-100Mp10μH ±20% 2700mA 2400mA 0.150Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH
0.68μH
0
2
0 12108642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0
10
20
30
40
50
0 108624
6.8μH
4.7μH
3.3μH
2.2μH
0.68μH
1.0μH
1.5μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
360
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
10μH
2.2μH 1.5μH 1.0μH 0.68μH
6.8μH 4.7μH 3.3μH
0.1
0.1
110
100
10
1
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
361
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDSD0630 Series 2726 (7066) inch (mm)
Appearance/Dimensions
3.2
1.5 7.0
1.5
6.6
(4.0)
3.0 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDSD0630-H-R68Mp0.68μH ±20% 17000mA 9600mA 0.0086Ω 0.1MHz
FDSD0630-H-1R0Mp1.0μH ±20% 15000mA 9400mA 0.0110Ω 0.1MHz
FDSD0630-H-1R5Np1.5μH ±20% 13000mA 8500mA 0.0130Ω 0.1MHz
FDSD0630-H-2R2Mp2.2μH ±20% 12000mA 7100mA 0.0170Ω 0.1MHz
FDSD0630-H-3R3Mp3.3μH ±20% 8000mA 5600mA 0.0280Ω 0.1MHz
FDSD0630-H-4R7Mp4.7μH ±20% 7600mA 4700mA 0.0400Ω 0.1MHz
FDSD0630-H-5R6Mp5.6μH ±20% 7000mA 4100mA 0.0460Ω 0.1MHz
FDSD0630-H-6R8Mp6.8μH ±20% 5900mA 3700mA 0.0610Ω 0.1MHz
FDSD0630-H-8R2Mp8.2μH ±20% 5500mA 3400mA 0.0700Ω 0.1MHz
FDSD0630-H-100Mp10μH ±20% 5400mA 3200mA 0.0740Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
10μH
8.2μH
6.8μH
5.6μH
4.7μH
3.3μH 2.2μH
1.5μH
1.0μH
0.68μH
0
1
0 2015105
10
2
3
4
5
6
7
8
9
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0
10
20
30
40
50
0 1412108642
8.2μH
6.8μH
5.6μH
4.7μH
0.68μH
1.0μH
1.5μH
2.2μH
3.3μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
362
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
10μH
3.3μH 2.2μH 1.5μH 1.0μH 0.68μH
8.2μH 6.8μH 5.6μH 4.7μH
0.1
0.1
10
1
100
110
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
363
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDV0530 Series 2423 (6258) inch (mm)
Appearance/Dimensions
6.2
3.0 max.
2.8
1.2
1.2 (3.8)
5.8
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDV0530-H-R11Mp0.11μH ±20% 19600mA 18200mA 0.0016Ω 0.1MHz
FDV0530-H-R20Mp0.2μH ±20% 17500mA 17700mA 0.0024Ω 0.1MHz
FDV0530-H-R36Mp0.36μH ±20% 12600mA 13900mA 0.0041Ω 0.1MHz
FDV0530-H-R56Mp0.56μH ±20% 11300mA 11100mA 0.0063Ω 0.1MHz
FDV0530-H-R75Mp0.75μH ±20% 9900mA 9700mA 0.0076Ω 0.1MHz
FDV0530-H-1R0Mp1.0μH ±20% 8400mA 7700mA 0.0112Ω 0.1MHz
FDV0530-H-1R5Mp1.5μH ±20% 5700mA 6600mA 0.0155Ω 0.1MHz
FDV0530-H-2R2Mp2.2μH ±20% 5300mA 6000mA 0.0199Ω 0.1MHz
FDV0530-H-3R3Mp3.3μH ±20% 4100mA 4500mA 0.0341Ω 0.1MHz
FDV0530-H-4R7Mp4.7μH ±20% 3500mA 3600mA 0.0536Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
1.0
2.0
3.0
4.0
5.0
0 5 10 15 20 25 30
0.11μH
0.20μH
0.36μH
0.56μH
0.75μH
1.0μH
1.5μH
2.2μH
3.3μH
4.7μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature Rise (°C)
4.7μH
3.3μH
2.2μH
0.11μH
0.20μH
0.36μH
0.56μH
0.75μH
1.5μH
1.0μH
0
10
20
30
40
50
0 302520
15
105
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
364
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDV0618 Series 2926 (7467) inch (mm)
Appearance/Dimensions
(
Tolerance: ±0.3
in mm
)
6.7
7.4
1.4 (4.6) 1.4
1.8 max.
3.2
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDV0618-H-R24Np0.24μH ±30% 14000mA 13000mA 0.0045Ω 0.1MHz
FDV0618-H-R35Np0.35μH ±30% 11000mA 10000mA 0.0068Ω 0.1MHz
FDV0618-H-R68Mp0.68μH ±20% 9800mA 8700mA 0.0100Ω 0.1MHz
FDV0618-H-1R0Mp1.0μH ±20% 7100mA 5400mA 0.0170Ω 0.1MHz
FDV0618-H-1R5Np1.5μH ±20% 6000mA 4800mA 0.0270Ω 0.1MHz
FDV0618-H-2R2Mp2.2μH ±20% 5300mA 4400mA 0.0340Ω 0.1MHz
FDV0618-H-3R3Mp3.3μH ±20% 4100mA 3200mA 0.0480Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 5 10 15 20 25 30
0.24μH
0.35μH
0.68μH
Temperature Rise Characteristics (Typ.)
Temperature Rise (°C)
DC Current (A)
0
10
20
30
40
50
60
048121620
0.24μH
0.35μH
0.68μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
365
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDV0620 Series 2926 (7467) inch (mm)
Appearance/Dimensions
(
Tolerance: ±0.3
in mm
)(
Tolerance: ±0.3
in mm
)
6.7
7.4
1.4 (4.6) 1.4
2.0 max.
3.2
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDV0620-H-R20Mp0.2μH ±20% 16200mA 12400mA 0.0045Ω 0.1MHz
FDV0620-H-R47Mp0.47μH ±20% 11000mA 9000mA 0.0083Ω 0.1MHz
FDV0620-H-R68Mp0.68μH ±20% 10000mA 7700mA 0.0100Ω 0.1MHz
FDV0620-H-1R0Mp1.0μH ±20% 7700mA 5700mA 0.0180Ω 0.1MHz
FDV0620-H-1R5Mp1.5μH ±20% 6000mA 5000mA 0.0260Ω 0.1MHz
FDV0620-H-2R2Mp2.2μH ±20% 5100mA 4000mA 0.0370Ω 0.1MHz
FDV0620-H-3R3Mp3.3μH ±20% 4200mA 3200mA 0.0510Ω 0.1MHz
FDV0620-H-4R7Mp4.7μH ±20% 3500mA 2800mA 0.0680Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
1.0
2.0
3.0
4.0
5.0
02 8 14410166121820
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH 0.68μH
0.47μH
0.2μH
Temperature Rise Characteristics (Typ.)
Temperature Rise (°C)
0
10
20
30
40
50
60
DC Current (A)
0 5 10 15 20
0.2μH
0.47μH
0.68μH
1.0μH
1.5μH
2.2μH
3.3μH
4.7μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
366
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDVE0630 Series 2926 (7467) inch (mm)
Appearance/Dimensions
(
Tolerance: ±0.3
in mm
)
3.0 max.
6.7
7.4
1.4 (4.6) 1.4
3.2
3.7
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDVE0630-H-R16Mp0.16μH ±20% 19400mA 20700mA 0.0016Ω 0.1MHz
FDVE0630-H-R33Mp0.33μH ±20% 15900mA 16900mA 0.0027Ω 0.1MHz
FDVE0630-H-R47Mp0.47μH ±20% 15600mA 14100mA 0.0037Ω 0.1MHz
FDVE0630-H-R68Mp0.68μH ±20% 10400mA 11900mA 0.0060Ω 0.1MHz
FDVE0630-H-R75Mp0.75μH ±20% 10900mA 10700mA 0.0062Ω 0.1MHz
FDVE0630-H-1R0Mp1.0μH ±20% 9500mA 9500mA 0.0085Ω 0.1MHz
FDVE0630-H-1R5Mp1.5μH ±20% 8100mA 8000mA 0.0121Ω 0.1MHz
FDVE0630-H-2R2Mp2.2μH ±20% 6900mA 6600mA 0.0162Ω 0.1MHz
FDVE0630-H-3R3Mp3.3μH ±20% 5300mA 5300mA 0.0254Ω 0.1MHz
FDVE0630-H-4R7Mp4.7μH ±20% 4600mA 4400mA 0.0361Ω 0.1MHz
FDVE0630-H-6R8Mp6.8μH ±20% 3400mA 3600mA 0.0542Ω 0.1MHz
FDVE0630-H-100Mp10μH ±20% 3100mA 2800mA 0.0792Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
0102030
0.47μH
0.33μH
0.16μH
10μH
0.75μH
0.68μH
1.0μH
1.5μH
2.2μH
3.3μH
4.7μH
6.8μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature Rise (°C)
10μH
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH
0.75μH
0.68μH
0.47μH
0.33μH
0.16μH
0
10
20
30
40
50
0 252015510
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
367
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDVE1040 Series 4440 (112100) inch (mm)
Appearance/Dimensions
10.0
11.2
(
Tolerance: ±0.3
in mm
)
4.0 max.
2.1
2.1
3.0
(7.0)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDVE1040-H-1R5Mp1.5μH ±20% 13700mA 14600mA 0.0046Ω 0.1MHz
FDVE1040-H-2R2Mp2.2μH ±20% 11400mA 11600mA 0.0068Ω 0.1MHz
FDVE1040-H-2R7Mp2.7μH ±20% 10900mA 10500mA 0.0088Ω 0.1MHz
FDVE1040-H-3R3Mp3.3μH ±20% 9800mA 9000mA 0.0101Ω 0.1MHz
FDVE1040-H-4R7Mp4.7μH ±20% 8200mA 8000mA 0.0138Ω 0.1MHz
FDVE1040-H-5R6Mp5.6μH ±20% 7900mA 7300mA 0.0180Ω 0.1MHz
FDVE1040-H-6R8Mp6.8μH ±20% 7100mA 7100mA 0.0202Ω 0.1MHz
FDVE1040-H-100Mp10μH ±20% 6100mA 5200mA 0.0341Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
1.5μH
2.2μH
2.7μH
3.3μH
4.7μH
5.6μH
6.8μH
10μH
0
2.0
4.0
6.0
8.0
10.0
12.0
010
20 30 40
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature Rise (°C)
10μH
1.5μH
2.2μH
2.7μH
3.3μH
6.8μH
5.6μH
4.7μH
0
10
20
30
40
50
0 2015105
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
368
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDUE0640 Series 3026 (7667) inch (mm)
Appearance/Dimensions
7.6
4 max.
(4.6)
6.7
1.5 1.5
2.0
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FDUE0640-H-KR15Mp0.15μH ±20% 25000mA 33000mA 0.00061Ω±7% 0.1MHz
FDUE0640-H-R24Mp0.24μH ±20% 19000mA 27000mA 0.00089Ω±7% 0.1MHz
FDUE0640-H-R42Mp0.42μH ±20% 15000mA 22000mA 0.00148Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
Inductance (μH)
100 30
20 40
DC Current (A)
0.4
0.5
0.3
0.2
0.1
0
0.15μH
0.24μH
0.42μH
Temperature Rise Characteristics (Typ.)
Temperature Rise (°C)
DC Current (A)
0
10
20
30
40
50
60
010203040
50
0.42μH
0.24μH
0.15μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
369
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDUE0650 Series 3026 (7667) inch (mm)
Appearance/Dimensions
7.6
5.0 max.
(4.6)
6.7
1.5 1.5
A
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Terminal Dimensions (p: packaging code)
Part Number Terminal Dimensions
FDUE0650-H-R60Mp
A:2.7mm
FDUE0650-H-1R0MpA:2.4mm
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FDUE0650-H-R60Mp0.6μH ±20% 12000mA 18000mA 0.00224Ω±7% 0.1MHz
FDUE0650-H-1R0Mp1.0μH ±20% 9800mA 16000mA 0.00345Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
1.2
1.0
0.8
0.6
0.4
0.2
0
048
12 16 20 24 28
1.0μH
0.6μH
Inductance (μH)
DC Current (A)
Temperature Rise Characteristics (Typ.)
DC Current (A)
04812 16 20 24
Temperature Rise (°C)
0
10
20
30
40
50
0.6μH
1.0μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
370
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDUE1040D Series 4440 (112100) inch (mm)
Appearance/Dimensions
11.2
4.0 max.
2.2
(6.8)
2.2
10.0
2.7±0.5
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FDUE1040D-H-R22Mp0.22μH ±20% 32000mA 32000mA 0.00064Ω±7% 0.1MHz
FDUE1040D-H-R36Mp0.36μH ±20% 25000mA 30000mA 0.00079Ω±7% 0.1MHz
FDUE1040D-H-R45Mp0.45μH ±20% 24000mA 27000mA 0.00102Ω±7% 0.1MHz
FDUE1040D-H-1R0Mp1.0μH ±20% 16000mA 18000mA 0.00235Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
0.2
0.4
0.6
0.8
1.0
1.2
010203040
1.0μH
0.36μH
0.45μH
0.22μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
1.0μH
0.45μH
0.36μH
0.22μH
Temperature Rise (°C)
0
10
20
30
40
50
0 50403010 20
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
371
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDUE1245 Series 4848 (123121) inch (mm)
Appearance/Dimensions
A
12.1
3±0.5
4.5 max.
12.3
B(9.0) B
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Terminal Dimensions (p: packaging code)
Part Number Terminal Dimensions
FDUE1245-H-R50Mp
A:13.4mm B:2.2mm
FDUE1245-H-R72MpA:13.2mm B:2.1mm
FDUE1245-H-1R5MpA:13.2mm B:2.1mm
FDUE1245-H-2R2MpA:13.2mm B:2.1mm
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FDUE1245-H-R50Mp0.5μH ±20% 28000mA 30000mA 0.0008Ω±7% 0.1MHz
FDUE1245-H-R72Mp0.72μH ±20% 24000mA 22000mA 0.00163Ω±7% 0.1MHz
FDUE1245-H-1R5Mp1.5μH ±20% 17000mA 21000mA 0.00226Ω±7% 0.1MHz
FDUE1245-H-2R2Mp2.2μH ±20% 14000mA 17000mA 0.0034Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
0.5
1.0
1.5
2.0
2.5
3.0
0 5 10 15 20 25 30 35 40 45
2.2μH
1.5μH
0.5μH
0.72μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature Rise (°C)
0
10
20
30
40
50
0 4530 35 40252015105
0.5μH
2.2μH
1.5μH
0.72μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
372
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDUE1260 Series 5650 (143127) inch (mm)
Appearance/Dimensions
12.7
6.0 max.
14.3 max.
3.0±0.5
3.3 (7.5) 3.3
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FDUE1260-H-R45Np0.45μH ±30% 32000mA 34000mA 0.00058Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
0.0
0.1
0 605040302010
0.2
0.3
0.4
0.5
0.6
Inductance (μH)
DC Current (A)
Temperature Rise Characteristics (Typ.)
0
10
0 605040302010
20
30
40
50
60
DC Current (A)
ΔT (°C)
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
373
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
1
10
Inductance (μH)
0.1 101 100
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
374
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDA1055 Series 4242 (108108) inch (mm)
Appearance/Dimensions
10.8
A
5.5 max.
2.5
C
B
1.5
1.5
(8.25)
10.8
(
Tolerance: ±0.3
in mm
)
(1) (1) Dummy electrode
terminal:
Please solder to
an isolated pad.
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Terminal Dimensions (p: packaging code)
Part Number Terminal Dimensions
FDA1055-H-R56Mp
A:11.6mm B:1.9mm C:6.5mm
FDA1055-H-1R2MpA:11.6mm B:1.9mm C:6.5mm
FDA1055-H-1R5MpA:11.6mm B:1.9mm C:6.5mm
FDA1055-H-2R2MpA:11.4mm B:1.7mm C:6.4mm
FDA1055-H-3R3MpA:11.3mm B:1.4mm C:6.4mm
FDA1055-H-4R7MpA:11.3mm B:1.4mm C:6.4mm
FDA1055-H-5R6MpA:11.3mm B:1.4mm C:6.4mm
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDA1055-H-R56Mp0.56μH ±20% 27700mA 22700mA 0.0018Ω 0.1MHz
FDA1055-H-1R2Mp1.2μH ±20% 20000mA 17900mA 0.0029Ω 0.1MHz
FDA1055-H-1R5Mp1.5μH ±20% 18000mA 16600mA 0.0035Ω 0.1MHz
FDA1055-H-2R2Mp2.2μH ±20% 15500mA 13600mA 0.0048Ω 0.1MHz
FDA1055-H-3R3Mp3.3μH ±20% 11700mA 11200mA 0.0073Ω 0.1MHz
FDA1055-H-4R7Mp4.7μH ±20% 9900mA 9100mA 0.0110Ω 0.1MHz
FDA1055-H-5R6Mp5.6μH ±20% 8000mA 7500mA 0.0120Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.56μH
1.2μH
1.5μH
2.2μH
3.3μH
4.7μH
5.6μH
0
1
2
3
4
5
6
7
0 30252015105
Temperature Rise Characteristics (Typ.)
DC Current (A)
1.2μH
Temperature Rise (°C)
5.6μH
0
50
100
150
200
250
0 302520
15
105
4.7μH 3.3μH
2.2μH
1.5μH
0.56μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
375
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
5.6μH
1.5μH
Inductance (μH)
4.7μH
3.3μH
2.2μH
0.1
10
1
100
0.1
1.2μH
0.56μH
101 100
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
376
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FDA1254 Series 5049 (126125) inch (mm)
Appearance/Dimensions
1.5
B
1.8
1.8
(10.2)
5.4 max.
2.5
C
(
Tolerance: ±0.3
in mm
)
12.6
A
12.5
(1) (1) Dummy electrode
terminal:
Please solder to
an isolated pad.
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Terminal Dimensions (p: packaging code)
Part Number Terminal Dimensions
FDA1254-H-R68Mp
A:13.5mm B:1.8mm C:7.7mm
FDA1254-H-1R0MpA:13.5mm B:1.8mm C:7.7mm
FDA1254-H-1R2MpA:13.5mm B:1.8mm C:7.7mm
FDA1254-H-2R2MpA:13.2mm B:1.5mm C:7.6mm
FDA1254-H-3R3MpA:12.9mm B:1.2mm C:7.6mm
FDA1254-H-4R7MpA:12.9mm B:1.2mm C:7.6mm
FDA1254-H-5R6MpA:12.9mm B:1.2mm C:7.6mm
FDA1254-H-8R0MpA:12.9mm B:1.2mm C:7.6mm
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
FDA1254-H-R68Mp0.68μH ±20% 29100mA 23700mA 0.0015Ω 0.1MHz
FDA1254-H-1R0Mp1.0μH ±20% 25200mA 20500mA 0.0020Ω 0.1MHz
FDA1254-H-1R2Mp1.2μH ±20% 20200mA 18400mA 0.0026Ω 0.1MHz
FDA1254-H-2R2Mp2.2μH ±20% 14700mA 14200mA 0.0045Ω 0.1MHz
FDA1254-H-3R3Mp3.3μH ±20% 13100mA 11500mA 0.0070Ω 0.1MHz
FDA1254-H-4R7Mp4.7μH ±20% 11200mA 10200mA 0.0088Ω 0.1MHz
FDA1254-H-5R6Mp5.6μH ±20% 10800mA 9100mA 0.0094Ω 0.1MHz
FDA1254-H-8R0Mp8.0μH ±20% 9100mA 7100mA 0.0160Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
0
0
2
4
6
8
10
0.68μH
1.0μH
1.2μH
2.2μH
3.3μH
4.7μH
5.6μH
8.0μH
5 10152025303540
Inductance (μH)
Temperature Rise Characteristics (Typ.)
Temperature Rise (°C)
DC Current (A)
0 10203040
0
70
60
50
40
30
20
10
1.2μH
0.68μH
5.6μH
1.0μH
4.7μH
3.3μH
2.2μH
8.0μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
377
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FCUL0530 Series 2322 (5857) inch (mm)
Appearance/Dimensions
6.3
5.8±0.2
5.7±0.2
3.0 max.
1.3 (3.7) 1.3
1.4
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FCUL0530-R36Mp0.36μH ±20% 17000mA 18000mA 0.00240Ω±7% 0.1MHz
FCUL0530-R47Mp0.47μH ±20% 14000mA 16000mA 0.00285Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
0.47μH
Inductance (μH)
0.36μH
0
0.05
00
0. 5
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
50403010 20
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
0.47μH
0.36μH
0
10
20
30
40
50
60
70
0 302010
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
378
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
Inductance (μH)
0.47μH
0.36μH
101 100
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
379
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FCUL0624 Series 2926 (7366) inch (mm)
Appearance/Dimensions
(
Tolerance: ±0.3
in mm
)
2.4 max.
1.5 (4.3) 1.5
1.4
7.3
6.6
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FCUL0624-H-R22Mp0.22μH ±20% 23000mA 24000mA 0.00140Ω±7% 0.1MHz
FCUL0624-H-R47Mp0.47μH ±20% 17000mA 16000mA 0.00327Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.47μH
0.22μH
0
0.1
0.2
0.3
0.4
0.5
0.6
0 50403010 20
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.22μH
0.47μH
ΔT (°C)
0
10
0 40302010
90
20
30
40
50
60
70
80
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
380
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
110
Inductance (μH)
0.47μH
0.22μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
381
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FCUL0630 Series 2926 (7366) inch (mm)
Appearance/Dimensions
3.0 max.
1.5 (4.3) 1.5
1.4
7.3
6.6
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FCUL0630-H-R12Mp0.12μH ±20% 30000mA 32000mA 0.00077Ω±7% 0.1MHz
FCUL0630-H-R22Mp0.22μH ±20% 25000mA 26000mA 0.00112Ω±7% 0.1MHz
FCUL0630-H-R36Mp0.36μH ±20% 18000mA 21000mA 0.00190Ω±7% 0.1MHz
FCUL0630-H-R47Mp0.47μH ±20% 18000mA 18000mA 0.00248Ω±7% 0.1MHz
FCUL0630-H-R56Mp0.56μH ±20% 14000mA 17000mA 0.00283Ω±7% 0.1MHz
FCUL0630-H-R68Mp0.68μH ±20% 14000mA 15000mA 0.00358Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.68μH
0.56μH
0.47μH
0.36μH
0.22μH
0.12μH
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 50403010 20
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
0.68μH
0
10
90
20
30
40
50
60
70
80
0 604020
0.56μH
0.47μH
0.36μH
0.12μH
0.22μH
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
382
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
0.68μH
0.56μH 0.47μH
0.22μH
0.36μH
0.12μH
0.1
0.1
1
110
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
383
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FCUL1040 Series 4540 (115100) inch (mm)
Appearance/Dimensions
4.0 max.
2.35
2.35
10.0
11.5
(6.8)
A ±0.5
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FCUL1040-H-R18Mp0.18μH ±20% 53000mA 38000mA 0.00054Ω±7% 0.1MHz
FCUL1040-H-R36Mp0.36μH ±20% 36000mA 31000mA 0.00082Ω±7% 0.1MHz
FCUL1040-H-R42Mp0.42μH ±20% 34000mA 30000mA 0.00102Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -20 to 100°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.42μH
0.36μH
0.18μH
0
0.05
0
0.45
0.1
0.15
0.2
0.25
0.3
0.35
0.4
100806020 40
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
0.42μH
0
10
20
30
40
50
60
70
0 604020
0.36μH
0.18μH
Continued on the following page.
Terminal Dimensions (p: packaging code)
Part Number Terminal Dimensions
FCUL1040-H-R18MpA:3.9mm
FCUL1040-H-R36MpA:3.9mm
FCUL1040-H-R42MpA:3.5mm
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
384
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
0.36μH
0.18μH
0.42μH
0.1
0.1
1
101 100
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
385
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
FCUL1060 Series 4640 (116100) inch (mm)
Appearance/Dimensions
6.0 max.
2.4 2.4
(6.8)
3.9±0.5
10.0
11.6
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
FCUL1060-H-R36Mp0.36μH ±20% 41000mA 41000mA 0.00053Ω±7% 0.1MHz
FCUL1060-H-R56Mp0.56μH ±20% 34000mA 30000mA 0.00085Ω±7% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Absolute maximum voltage: 30V DC
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with 34420A (Keysight) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C)
Class of Magnetic Shield: Metal Alloy
Inductance-Current Characteristics (Typ.)
DC Current (A)
0.56μH
Inductance (μH)
0.36μH
0
0.1
0 80604020
0.2
0.3
0.4
0.5
0.6
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.36μH
Temperature rise (°C)
0.56μH
0
10
060705040302010
20
30
40
50
60
70
80
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
386
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
1
10
Inductance (μH)
0.56μH
0.36μH
0.1 101 100
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
387
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM2812C Series 1211 (3028) inch (mm)
Appearance/Dimensions
3.2 max.
3.0 max.
1.2 max.
1.0
(2.0)
(
Tolerance: ±0.2
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1225AS-H-R47Np0.47μH ±30% 2500mA 3100mA 0.026Ω+20%/-30% 0.1MHz
1225AS-H-R68Np0.68μH ±30% 2000mA 2900mA 0.031Ω+20%/-30% 0.1MHz
1225AS-H-1R0Np1.0μH ±30% 1800mA 2700mA 0.036Ω+20%/-30% 0.1MHz
1225AS-H-1R5Np1.5μH ±30% 1500mA 2400mA 0.043Ω+20%/-30% 0.1MHz
1225AS-H-2R2Mp2.2μH ±20% 1200mA 2000mA 0.058Ω+20%/-30% 0.1MHz
1225AS-H-3R3Mp3.3μH ±20% 1000mA 1500mA 0.080Ω+20%/-30% 0.1MHz
1225AS-H-4R7Mp4.7μH ±20% 880mA 1400mA 0.105Ω+20%/-30% 0.1MHz
1225AS-H-6R8Mp6.8μH ±20% 720mA 1100mA 0.170Ω+20%/-30% 0.1MHz
1225AS-H-100Mp10μH ±20% 580mA 850mA 0.250Ω+20%/-30% 0.1MHz
1225AS-H-120Mp12μH ±20% 550mA 760mA 0.290Ω+20%/-30% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
4
5.5
7
8.5
10
11.5
01.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
4
5.5
7
8.5
10
11.5
01.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
388
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM2815C Series 1211 (3028) inch (mm)
Appearance/Dimensions
3.2 max.
3.0 max.
1.5 max.
1.0
(2.0)
(
Tolerance: ±0.2
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1226AS-H-R47Np0.47μH ±30% 2900mA 3900mA 0.020Ω+20%/-30% 0.1MHz
1226AS-H-1R0Np1.0μH ±30% 2100mA 3300mA 0.027Ω+20%/-30% 0.1MHz
1226AS-H-1R5Np1.5μH ±30% 1700mA 2900mA 0.031Ω+20%/-30% 0.1MHz
1226AS-H-2R2Mp2.2μH ±20% 1400mA 2200mA 0.043Ω+20%/-30% 0.1MHz
1226AS-H-2R7Mp2.7μH ±20% 1300mA 2000mA 0.053Ω+20%/-30% 0.1MHz
1226AS-H-3R3Mp3.3μH ±20% 1100mA 1900mA 0.057Ω+20%/-30% 0.1MHz
1226AS-H-4R7Mp4.7μH ±20% 950mA 1600mA 0.080Ω+20%/-30% 0.1MHz
1226AS-H-6R8Mp6.8μH ±20% 800mA 1200mA 0.130Ω+20%/-30% 0.1MHz
1226AS-H-100Mp10μH ±20% 650mA 1000mA 0.180Ω+20%/-30% 0.1MHz
1226AS-H-120Mp12μH ±20% 600mA 850mA 0.228Ω+20%/-30% 0.1MHz
1226AS-H-150Mp15μH ±20% 500mA 800mA 0.270Ω+20%/-30% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
4
5.5
7
8.5
10
11.5
01.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
4
5.5
7
8.5
10
11.5
01.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
389
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM2818C Series 1211 (3028) inch (mm)
Appearance/Dimensions
3.2 max.
3.0 max.
1.8 max.
1.0
(2.0)
(
Tolerance: ±0.2
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1227AS-H-R47Np0.47μH ±30% 3300mA 4700mA 0.017Ω+20%/-30% 0.1MHz
1227AS-H-1R0Np1.0μH ±30% 2300mA 3700mA 0.024Ω+20%/-30% 0.1MHz
1227AS-H-1R5Np1.5μH ±30% 2000mA 3400mA 0.027Ω+20%/-30% 0.1MHz
1227AS-H-2R2Mp2.2μH ±20% 1700mA 2600mA 0.039Ω+20%/-30% 0.1MHz
1227AS-H-3R3Mp3.3μH ±20% 1300mA 2000mA 0.056Ω+20%/-30% 0.1MHz
1227AS-H-4R7Mp4.7μH ±20% 1100mA 1800mA 0.077Ω+20%/-30% 0.1MHz
1227AS-H-6R8Mp6.8μH ±20% 900mA 1300mA 0.122Ω+20%/-30% 0.1MHz
1227AS-H-100Mp10μH ±20% 750mA 1200mA 0.170Ω+20%/-30% 0.1MHz
1227AS-H-120Mp12μH ±20% 650mA 1000mA 0.215Ω+20%/-30% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
4
5.5
7
8.5
10
11.5
01.61.41.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
4
5.5
7
8.5
10
11.5
01.61.41.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
390
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM3512C Series 1514 (3735) inch (mm)
Appearance/Dimensions
3.9 max.
3.7 max.
1.2 max.
1.2
(2.5)
(
Tolerance: ±0.2
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1229AS-H-R68Np0.68μH ±30% 2500mA 2250mA 0.043Ω+20%/-30% 0.1MHz
1229AS-H-1R0Np1.0μH ±30% 2050mA 1850mA 0.054Ω+20%/-30% 0.1MHz
1229AS-H-1R5Np1.5μH ±30% 1650mA 1800mA 0.062Ω+20%/-30% 0.1MHz
1229AS-H-2R0Mp2.0μH ±20% 1500mA 1700mA 0.073Ω+20%/-30% 0.1MHz
1229AS-H-3R3Mp3.3μH ±20% 1300mA 1650mA 0.080Ω+20%/-30% 0.1MHz
1229AS-H-4R7Mp4.7μH ±20% 1100mA 1350mA 0.105Ω+20%/-30% 0.1MHz
1229AS-H-6R8Mp6.8μH ±20% 900mA 1200mA 0.160Ω+20%/-30% 0.1MHz
1229AS-H-100Mp10μH ±20% 750mA 850mA 0.240Ω+20%/-30% 0.1MHz
1229AS-H-120Mp12μH ±20% 650mA 790mA 0.280Ω+20%/-30% 0.1MHz
1229AS-H-150Mp15μH ±20% 590mA 720mA 0.340Ω+20%/-30% 0.1MHz
1229AS-H-220Mp22μH ±20% 500mA 530mA 0.560Ω+20%/-30% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
4
5.5
7
8.5
10
11.5
01.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
4
5.5
7
8.5
10
11.5
01.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
391
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM3518C Series 1514 (3735) inch (mm)
Appearance/Dimensions
3.9 max.
3.7 max.1.2
(2.5)
1.8 max.
(
Tolerance: ±0.2
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1231AS-H-R56Np0.56μH ±30% 3300mA 3400mA 0.024Ω+20%/-30% 0.1MHz
1231AS-H-1R2Np1.2μH ±30% 2400mA 2900mA 0.030Ω+20%/-30% 0.1MHz
1231AS-H-1R5Np1.5μH ±30% 2100mA 2700mA 0.035Ω+20%/-30% 0.1MHz
1231AS-H-2R2Mp2.2μH ±20% 1900mA 2550mA 0.040Ω+20%/-30% 0.1MHz
1231AS-H-3R3Mp3.3μH ±20% 1600mA 2250mA 0.050Ω+20%/-30% 0.1MHz
1231AS-H-4R7Mp4.7μH ±20% 1350mA 2000mA 0.060Ω+20%/-30% 0.1MHz
1231AS-H-6R4Mp6.4μH ±20% 1150mA 1650mA 0.085Ω+20%/-30% 0.1MHz
1231AS-H-100Mp10μH ±20% 900mA 1250mA 0.145Ω+20%/-30% 0.1MHz
1231AS-H-120Mp12μH ±20% 850mA 1200mA 0.155Ω+20%/-30% 0.1MHz
1231AS-H-150Mp15μH ±20% 800mA 1100mA 0.185Ω+20%/-30% 0.1MHz
1231AS-H-220Mp22μH ±20% 650mA 880mA 0.285Ω+20%/-30% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
2
4
6
8
10
12
01.61.41.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
2
4
6
8
10
12
01.61.41.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
392
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM4518C Series 1818 (4745) inch (mm)
Appearance/Dimensions
4.9 max.
4.7 max.
1.8
(3.5)
1.8 max.
(
Tolerance: ±0.2
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1235AS-H-1R2Np1.2μH ±30% 3500mA 2900mA 0.039Ω+20%/-30% 0.1MHz
1235AS-H-1R8Np1.8μH ±30% 3000mA 2700mA 0.047Ω+20%/-30% 0.1MHz
1235AS-H-2R4Mp2.4μH ±20% 2600mA 2300mA 0.054Ω+20%/-30% 0.1MHz
1235AS-H-3R3Mp3.3μH ±20% 2300mA 2100mA 0.062Ω+20%/-30% 0.1MHz
1235AS-H-4R3Mp4.3μH ±20% 2000mA 2000mA 0.070Ω+20%/-30% 0.1MHz
1235AS-H-6R8Mp6.8μH ±20% 1700mA 1900mA 0.088Ω+20%/-30% 0.1MHz
1235AS-H-100Mp10μH ±20% 1300mA 1700mA 0.110Ω+20%/-30% 0.1MHz
1235AS-H-150Mp15μH ±20% 980mA 1100mA 0.160Ω+20%/-30% 0.1MHz
1235AS-H-220Mp22μH ±20% 910mA 1000mA 0.265Ω+20%/-30% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
0
3
5
8
10
13
02.11.81.51.20.90.60.3
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
0
3
5
8
10
13
02.11.81.51.20.90.60.3
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
393
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
D52LC Series 2020 (5252) inch (mm)
Appearance/Dimensions
2.0 max.
0.6
4.2
1.4
p5.2 max.
0.15
Direction Indication
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
#A914BYW-1R2Mp1.2μH ±20% 2150mA 2440mA 0.044Ω 0.1MHz
#A914BYW-2R2Mp2.2μH ±20% 1630mA 1740mA 0.059Ω 0.1MHz
#A914BYW-3R5Mp3.5μH ±20% 1340mA 1540mA 0.073Ω 0.1MHz
#A914BYW-4R7Mp4.7μH ±20% 1140mA 1300mA 0.087Ω 0.1MHz
#A914BYW-6R8Mp6.8μH ±20% 950mA 1170mA 0.105Ω 0.1MHz
#A914BYW-100Mp10μH ±20% 760mA 930mA 0.150Ω 0.1MHz
#A914BYW-150Mp15μH ±20% 630mA 770mA 0.210Ω 0.1MHz
#A914BYW-220Mp22μH ±20% 560mA 700mA 0.275Ω 0.1MHz
#A914BYW-330Mp33μH ±20% 440mA 510mA 0.455Ω 0.1MHz
#A914BYW-470Mp47μH ±20% 360mA 380mA 0.730Ω 0.1MHz
#A914BYW-560Mp56μH ±20% 330mA 370mA 0.828Ω 0.1MHz
#A914BYW-680Mp68μH ±20% 300mA 350mA 0.935Ω 0.1MHz
#A914BY-101Mp100μH ±20% 230mA 260mA 1.500Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
0
2.5
5
7.5
10
12.5
01.41.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
0
2.5
5
7.5
10
12.5
01.41.210.80.60.40.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
394
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
D53LC High Current Series 2020 (5252) inch (mm)
Appearance/Dimensions
Direction Indication
0.6
4.2
1.4
3.0 max.
p5.2 max.
0.15
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
#A915AY-1R1Mp1.1μH ±20% 3870mA 3460mA 0.016Ω+20%/-30% 0.1MHz
#A915AY-2R0Mp2.0μH ±20% 2920mA 2800mA 0.022Ω+20%/-30% 0.1MHz
#A915AY-3R3Mp3.3μH ±20% 2360mA 2400mA 0.029Ω+20%/-30% 0.1MHz
#A915AY-4R7Mp4.7μH ±20% 1870mA 2130mA 0.038Ω+20%/-30% 0.1MHz
#A915AY-6R8Mp6.8μH ±20% 1510mA 1750mA 0.057Ω+20%/-30% 0.1MHz
#A915AY-100Mp10μH ±20% 1330mA 1490mA 0.075Ω+20%/-30% 0.1MHz
#A915AY-150Mp15μH ±20% 1050mA 1160mA 0.118Ω+20%/-30% 0.1MHz
#A915AY-220Mp22μH ±20% 860mA 860mA 0.173Ω+20%/-30% 0.1MHz
#A915AY-330Mp33μH ±20% 720mA 800mA 0.214Ω+20%/-30% 0.1MHz
#A915AY-470Mp47μH ±20% 620mA 680mA 0.293Ω+20%/-30% 0.1MHz
#A915AY-680Mp68μH ±20% 510mA 550mA 0.437Ω+20%/-30% 0.1MHz
#A915AY-101Mp100μH ±20% 430mA 460mA 0.667Ω+20%/-30% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
0.2
0.4
0.6
0.8
1
1.2
0654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
Temperature Rise Characteristics (Typ.)
0.2
0.4
0.6
0.8
1
1.2
0654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
395
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
D53LC Low DC resistance Series 2020 (5252) inch (mm)
Appearance/Dimensions
Direction Indication
0.6
4.2
1.4
3.0 max.
p5.2 max.
0.15
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
#A915BY-4R7Mp4.7μH ±20% 1130mA 2310mA 0.029Ω+20%/-30% 0.1MHz
#A915BY-6R8Mp6.8μH ±20% 990mA 1930mA 0.042Ω+20%/-30% 0.1MHz
#A915BY-100Mp10μH ±20% 740mA 1600mA 0.056Ω+20%/-30% 0.1MHz
#A915BY-150Mp15μH ±20% 580mA 1360mA 0.081Ω+20%/-30% 0.1MHz
#A915BY-220Mp22μH ±20% 510mA 1190mA 0.112Ω+20%/-30% 0.1MHz
#A915BY-330Mp33μH ±20% 410mA 920mA 0.172Ω+20%/-30% 0.1MHz
#A915BY-470Mp47μH ±20% 340mA 800mA 0.224Ω+20%/-30% 0.1MHz
#A915BY-680Mp68μH ±20% 290mA 680mA 0.309Ω+20%/-30% 0.1MHz
#A915BY-101Mp100μH ±20% 260mA 540mA 0.474Ω+20%/-30% 0.1MHz
#A915BY-151Mp150μH ±20% 210mA 400mA 0.785Ω+20%/-30% 0.1MHz
#A915BY-221Mp220μH ±20% 180mA 350mA 0.995Ω+20%/-30% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
2
4
6
8
10
12
00.80.4 1.2 1.6 21.81.410.60.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
Temperature Rise Characteristics (Typ.)
2
4
6
8
10
12
00.80.4 1.2 1.6 21.81.410.60.2
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
396
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
D63LCB Series 2524 (6362) inch (mm)
Appearance/Dimensions
6.3 max.
4.8
0.6
2.0
6.2 max.
3.0 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
#A921CY-1R0Mp1.0μH ±20% 3590mA 4520mA 0.011Ω+20%/-30% 0.1MHz
#A921CY-1R5Mp1.5μH ±20% 2930mA 3780mA 0.013Ω+20%/-30% 0.1MHz
#A921CY-2R2Mp2.2μH ±20% 2420mA 3510mA 0.016Ω+20%/-30% 0.1MHz
#A921CY-3R6Mp3.6μH ±20% 1890mA 3010mA 0.021Ω+20%/-30% 0.1MHz
#A921CY-4R7Mp4.7μH ±20% 1660mA 2580mA 0.027Ω+20%/-30% 0.1MHz
#A921CY-6R2Mp6.2μH ±20% 1450mA 2280mA 0.032Ω+20%/-30% 0.1MHz
#A921CY-100Mp10μH ±20% 1140mA 1910mA 0.049Ω+20%/-30% 0.1MHz
#A921CY-120Mp12μH ±20% 1040mA 1800mA 0.052Ω+20%/-30% 0.1MHz
#A921CY-150Mp15μH ±20% 930mA 1730mA 0.062Ω+20%/-30% 0.1MHz
#A921CY-180Mp18μH ±20% 850mA 1580mA 0.074Ω+20%/-30% 0.1MHz
#A921CY-220Mp22μH ±20% 770mA 1340mA 0.095Ω+20%/-30% 0.1MHz
#A921CY-270Mp27μH ±20% 700mA 1140mA 0.120Ω+20%/-30% 0.1MHz
#A921CY-330Mp33μH ±20% 630mA 1010mA 0.140Ω+20%/-30% 0.1MHz
#A921CY-390Mp39μH ±20% 580mA 980mA 0.150Ω+20%/-30% 0.1MHz
#A921CY-470Mp47μH ±20% 530mA 890mA 0.185Ω+20%/-30% 0.1MHz
#A921CY-560Mp56μH ±20% 480mA 820mA 0.220Ω+20%/-30% 0.1MHz
#A921CY-680Mp68μH ±20% 440mA 730mA 0.270Ω+20%/-30% 0.1MHz
#A921CY-820Mp82μH ±20% 400mA 640mA 0.330Ω+20%/-30% 0.1MHz
#A921CY-101Mp100μH ±20% 360mA 580mA 0.415Ω+20%/-30% 0.1MHz
#A921CY-151Mp150μH ±20% 310mA 440mA 0.615Ω+20%/-30% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
397
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Current Characteristics (Typ.)
0
2.5
5
7.5
10
12.5
02.521.510.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
0
2.5
5
7.5
10
12.5
02.521.510.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
398
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DG6045C Series 2424 (6060) inch (mm)
Appearance/Dimensions
6.3 max.4.5 max.
1.2
6.3 max.
5.3
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1255AY-1R0Np1.0μH ±30% 9500mA 6500mA 0.010Ω±20% 0.1MHz
1255AY-1R2Np1.2μH ±30% 8400mA 5900mA 0.012Ω±20% 0.1MHz
1255AY-1R8Np1.8μH ±30% 6800mA 5300mA 0.014Ω±20% 0.1MHz
1255AY-2R2Np2.2μH ±30% 6300mA 4700mA 0.016Ω±20% 0.1MHz
1255AY-2R7Np2.7μH ±30% 5600mA 4600mA 0.018Ω±20% 0.1MHz
1255AY-3R3Np3.3μH ±30% 5200mA 4400mA 0.021Ω±20% 0.1MHz
1255AY-3R9Np3.9μH ±30% 4700mA 4200mA 0.022Ω±20% 0.1MHz
1255AY-4R7Mp4.7μH ±20% 4500mA 4000mA 0.023Ω±20% 0.1MHz
1255AY-6R8Mp6.8μH ±20% 3600mA 3400mA 0.036Ω±20% 0.1MHz
1255AY-100Mp10μH ±20% 3100mA 2900mA 0.047Ω±20% 0.1MHz
1255AY-150Mp15μH ±20% 2500mA 2400mA 0.063Ω±20% 0.1MHz
1255AY-220Mp22μH ±20% 2000mA 1900mA 0.098Ω±20% 0.1MHz
1255AY-270Mp27μH ±20% 1800mA 1800mA 0.135Ω±20% 0.1MHz
1255AY-330Mp33μH ±20% 1700mA 1500mA 0.145Ω±20% 0.1MHz
1255AY-470Mp47μH ±20% 1400mA 1300mA 0.210Ω±20% 0.1MHz
1255AY-680Mp68μH ±20% 1200mA 1000mA 0.310Ω±20% 0.1MHz
1255AY-101Mp100μH ±20% 900mA 900mA 0.460Ω±20% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Magnetic Resin
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
399
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Current Characteristics (Typ.)
0
2.5
5
7.5
10
12.5
04.543.532.521.510.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
0
2.5
5
7.5
10
12.5
04.543.532.521.510.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
400
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DG6050C Series 2424 (6060) inch (mm)
Appearance/Dimensions
6.3 max.
5.0 max.1.2
6.3 max.
5.3
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1264EY-1R2Np1.2μH ±30% 9800mA 6300mA 0.012Ω±20% 0.1MHz
1264EY-1R5Np1.5μH ±30% 8300mA 5500mA 0.014Ω±20% 0.1MHz
1264EY-2R2Np2.2μH ±30% 7800mA 5300mA 0.016Ω±20% 0.1MHz
1264EY-3R3Np3.3μH ±30% 6500mA 4800mA 0.021Ω±20% 0.1MHz
1264EY-4R7Mp4.7μH ±20% 5400mA 3700mA 0.029Ω±20% 0.1MHz
1264EY-6R8Mp6.8μH ±20% 4400mA 3400mA 0.035Ω±20% 0.1MHz
1264EY-100Mp10μH ±20% 3500mA 3100mA 0.045Ω±20% 0.1MHz
1264EY-150Mp15μH ±20% 3000mA 2100mA 0.087Ω±20% 0.1MHz
1264EY-220Mp22μH ±20% 2300mA 1800mA 0.110Ω±20% 0.1MHz
1264EY-330Mp33μH ±20% 1900mA 1400mA 0.170Ω±20% 0.1MHz
1264EY-470Mp47μH ±20% 1700mA 1200mA 0.260Ω±20% 0.1MHz
1264EY-680Mp68μH ±20% 1400mA 1100mA 0.325Ω±20% 0.1MHz
1264EY-101Mp100μH ±20% 1200mA 900mA 0.460Ω±20% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Magnetic Resin
Inductance-Current Characteristics (Typ.)
0
2
4
6
8
10
021 3454.53.52.51.50.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
0
2
4
6
8
10
021 3454.53.52.51.50.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
401
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DS75LC Series 2929 (7373) inch (mm)
Appearance/Dimensions
p7.6 max.5.0 max.5.31.0
2.0
1.0
Direction Indication
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
B1047AS-1R0Np1.0μH ±30% 9200mA 6400mA 0.012Ω 0.1MHz
B1047AS-1R5Np1.5μH ±30% 7700mA 5900mA 0.014Ω 0.1MHz
B1047AS-2R2Np2.2μH ±30% 6500mA 5500mA 0.016Ω 0.1MHz
B1047AS-2R7Np2.7μH ±30% 5600mA 5100mA 0.018Ω 0.1MHz
B1047AS-3R6Np3.6μH ±30% 5000mA 4400mA 0.023Ω 0.1MHz
B1047AS-4R7Np4.7μH ±30% 4500mA 4100mA 0.026Ω 0.1MHz
B1047AS-5R6Np5.6μH ±30% 4000mA 3500mA 0.032Ω 0.1MHz
B1047AS-6R8Np6.8μH ±30% 3600mA 3400mA 0.036Ω 0.1MHz
B1047AS-8R2Np8.2μH ±30% 3200mA 3000mA 0.042Ω 0.1MHz
B1047AS-100Mp10μH ±20% 2900mA 2700mA 0.053Ω 0.1MHz
B1047AS-120Mp12μH ±20% 2700mA 2400mA 0.063Ω 0.1MHz
B1047AS-150Mp15μH ±20% 2400mA 2200mA 0.071Ω 0.1MHz
B1047AS-180Mp18μH ±20% 2200mA 1900mA 0.110Ω 0.1MHz
B1047AS-220Mp22μH ±20% 2000mA 1800mA 0.120Ω 0.1MHz
B1047AS-270Mp27μH ±20% 1800mA 1600mA 0.130Ω 0.1MHz
B1047AS-330Mp33μH ±20% 1640mA 1500mA 0.170Ω 0.1MHz
B1047AS-390Mp39μH ±20% 1500mA 1400mA 0.180Ω 0.1MHz
B1047AS-470Mp47μH ±20% 1380mA 1300mA 0.200Ω 0.1MHz
B1047AS-560Mp56μH ±20% 1240mA 1200mA 0.230Ω 0.1MHz
B1047AS-680Mp68μH ±20% 1130mA 1000mA 0.280Ω 0.1MHz
B1047AS-820Mp82μH ±20% 1000mA 940mA 0.320Ω 0.1MHz
B1047AS-101Mp100μH ±20% 940mA 770mA 0.460Ω 0.1MHz
B1047AS-151Mp150μH ±20% 760mA 600mA 0.710Ω 0.1MHz
B1047AS-221Mp220μH ±20% 620mA 470mA 1.100Ω 0.1MHz
B1047AS-331Mp330μH ±20% 510mA 410mA 1.400Ω 0.1MHz
B1047AS-471Mp470μH ±20% 430mA 370mA 1.700Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
402
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Current Characteristics (Typ.)
2
4
6
8
10
12
04.543.532.521.510.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
L (100°C)
Temperature Rise Characteristics (Typ.)
2
4
6
8
10
12
04.543.532.521.510.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
L (100°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
403
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DG8040C Series 3131 (8080) inch (mm)
Appearance/Dimensions
8.3 max.
8.3 max.
4.0 max.
5.0
1.5
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1267AY-1R0Np1.0μH ±30% 10400mA 8400mA 0.007Ω±20% 0.1MHz
1267AY-1R5Np1.5μH ±30% 8200mA 7300mA 0.009Ω±20% 0.1MHz
1267AY-2R2Np2.2μH ±30% 7400mA 6500mA 0.011Ω±20% 0.1MHz
1267AY-3R3Np3.3μH ±30% 6100mA 6100mA 0.013Ω±20% 0.1MHz
1267AY-4R7Np4.7μH ±30% 5100mA 5300mA 0.017Ω±20% 0.1MHz
1267AY-6R8Np6.8μH ±30% 4000mA 4500mA 0.022Ω±20% 0.1MHz
1267AY-100Mp10μH ±20% 3300mA 3900mA 0.033Ω±20% 0.1MHz
1267AY-150Mp15μH ±20% 2600mA 3200mA 0.049Ω±20% 0.1MHz
1267AY-220Mp22μH ±20% 2300mA 2800mA 0.062Ω±20% 0.1MHz
1267AY-330Mp33μH ±20% 1900mA 2200mA 0.100Ω±20% 0.1MHz
1267AY-470Mp47μH ±20% 1600mA 1900mA 0.140Ω±20% 0.1MHz
1267AY-680Mp68μH ±20% 1300mA 1600mA 0.200Ω±20% 0.1MHz
1267AY-101Mp100μH ±20% 1100mA 1300mA 0.280Ω±20% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Magnetic Resin
Inductance-Current Characteristics (Typ.)
3
11
9
7
5
054321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
3
11
9
7
5
054321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
404
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM8030C Series 3131 (8080) inch (mm)
Appearance/Dimensions
3.0 max.
(2.0)
8.3 max.8.0
8.3 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1273AS-H-1R5Np1.5μH ±30% 7500mA 7300mA 0.0083Ω±20% 0.1MHz
1273AS-H-2R2Np2.2μH ±30% 6200mA 6500mA 0.0110Ω±20% 0.1MHz
1273AS-H-3R3Np3.3μH ±30% 5200mA 5400mA 0.0160Ω±20% 0.1MHz
1273AS-H-4R7Np4.7μH ±30% 4400mA 4900mA 0.0190Ω±20% 0.1MHz
1273AS-H-6R8Np6.8μH ±30% 3400mA 3700mA 0.0031Ω±20% 0.1MHz
1273AS-H-100Mp10μH ±20% 2900mA 3100mA 0.0450Ω±20% 0.1MHz
1273AS-H-150Mp15μH ±20% 2400mA 2600mA 0.0650Ω±20% 0.1MHz
1273AS-H-220Mp22μH ±20% 2000mA 2000mA 0.1050Ω±20% 0.1MHz
1273AS-H-330Mp33μH ±20% 1600mA 1900mA 0.1450Ω±20% 0.1MHz
1273AS-H-470Mp47μH ±20% 1300mA 1300mA 0.2410Ω±20% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
2
4
6
8
10
12
04.543.532.521.510.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
2
4
6
8
10
12
04.543.532.521.510.5
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
405
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM8040C Series 3131 (8080) inch (mm)
Appearance/Dimensions
4.0 max.
8.3 max.
8.3 max.
3.0
(4.8)
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1248AS-H-1R5Np1.5μH ±30% 10000mA 8000mA 0.0084Ω±20% 0.1MHz
1248AS-H-2R2Np2.2μH ±30% 8600mA 7000mA 0.0110Ω±20% 0.1MHz
1248AS-H-3R3Np3.3μH ±30% 7200mA 5600mA 0.0160Ω±20% 0.1MHz
1248AS-H-4R7Np4.7μH ±30% 6200mA 5300mA 0.0190Ω±20% 0.1MHz
1248AS-H-6R8Np6.8μH ±30% 4800mA 4200mA 0.0300Ω±20% 0.1MHz
1248AS-H-100Mp10μH ±20% 4100mA 3400mA 0.0440Ω±20% 0.1MHz
1248AS-H-150Mp15μH ±20% 3400mA 2700mA 0.0650Ω±20% 0.1MHz
1248AS-H-220Mp22μH ±20% 2800mA 2200mA 0.1050Ω±20% 0.1MHz
1248AS-H-330Mp33μH ±20% 2400mA 1800mA 0.1400Ω±20% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
2
4
6
8
10
12
0654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
2
4
6
8
10
12
0654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
406
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM8045C Series 3131 (8080) inch (mm)
Appearance/Dimensions
4.5 max.
8.3 max.
8.3 max.
3.0
(4.8)
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1217AS-H-1R5Np1.5μH ±30% 11200mA 9400mA 0.0065Ω±20% 0.1MHz
1217AS-H-2R2Np2.2μH ±30% 9300mA 8700mA 0.0083Ω±20% 0.1MHz
1217AS-H-3R3Np3.3μH ±30% 7700mA 6800mA 0.0120Ω±20% 0.1MHz
1217AS-H-4R7Np4.7μH ±30% 6700mA 6300mA 0.0150Ω±20% 0.1MHz
1217AS-H-6R8Np6.8μH ±30% 5200mA 4800mA 0.0230Ω±20% 0.1MHz
1217AS-H-8R2Mp8.2μH ±20% 4800mA 4500mA 0.0280Ω±20% 0.1MHz
1217AS-H-100Mp10μH ±20% 4300mA 3900mA 0.0330Ω±20% 0.1MHz
1217AS-H-150Mp15μH ±20% 3300mA 3500mA 0.0440Ω±20% 0.1MHz
1217AS-H-220Mp22μH ±20% 2900mA 2400mA 0.0780Ω±20% 0.1MHz
1217AS-H-330Mp33μH ±20% 2300mA 2200mA 0.1100Ω±20% 0.1MHz
1217AS-H-470Mp47μH ±20% 2100mA 1800mA 0.1700Ω±20% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
2
4
6
8
10
12
07654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
2
4
6
8
10
12
07654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
407
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DEM10050C Series 3939 (100100) inch (mm)
Appearance/Dimensions
10.3 max.
(6.2)
5.0
10.3 max.
5.0 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* DC Resistance Inductance
Test Frequency
1274AS-H-1R5Np1.5μH ±30% 15300mA 8900mA 0.0064Ω±20% 0.1MHz
1274AS-H-2R2Np2.2μH ±30% 12600mA 8000mA 0.0080Ω±20% 0.1MHz
1274AS-H-3R3Np3.3μH ±30% 10800mA 7400mA 0.0095Ω±20% 0.1MHz
1274AS-H-4R7Np4.7μH ±30% 9500mA 6700mA 0.0112Ω±20% 0.1MHz
1274AS-H-6R8Np6.8μH ±30% 7500mA 5400mA 0.0177Ω±20% 0.1MHz
1274AS-H-100Mp10μH ±20% 6200mA 4400mA 0.0253Ω±20% 0.1MHz
1274AS-H-150Mp15μH ±20% 5100mA 3900mA 0.0352Ω±20% 0.1MHz
1274AS-H-220Mp22μH ±20% 4200mA 2900mA 0.0567Ω±20% 0.1MHz
1274AS-H-330Mp33μH ±20% 3500mA 2500mA 0.0780Ω±20% 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
5.5
7
8.5
10
11.5
13
0987654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
Temperature Rise Characteristics (Typ.)
5.5
7
8.5
10
11.5
13
0987654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
408
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DS104C2 Series 4040 (101101) inch (mm)
Appearance/Dimensions
p10.4 max.
6.0
2.0
4.8 max.
3.0
Direction Indication
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
#B952AS-H-1R1Np1.1μH ±30% 11700mA 6000mA 0.011Ω 0.1MHz
#B952AS-H-1R8Np1.8μH ±30% 8700mA 5400mA 0.014Ω 0.1MHz
#B952AS-H-2R7Np2.7μH ±30% 7300mA 4900mA 0.016Ω 0.1MHz
#B952AS-H-3R9Np3.9μH ±30% 5800mA 4600mA 0.018Ω 0.1MHz
#B952AS-H-5R1Np5.1μH ±30% 4900mA 3800mA 0.026Ω 0.1MHz
#B952AS-H-6R8Np6.8μH ±30% 4500mA 3100mA 0.035Ω 0.1MHz
#B952AS-H-8R2Np8.2μH ±30% 4100mA 2900mA 0.040Ω 0.1MHz
#B952AS-H-100Mp10μH ±20% 3600mA 2700mA 0.044Ω 0.1MHz
#B952AS-H-120Mp12μH ±20% 3300mA 2500mA 0.051Ω 0.1MHz
#B952AS-H-150Mp15μH ±20% 3100mA 2300mA 0.062Ω 0.1MHz
#B952AS-H-180Mp18μH ±20% 2700mA 2000mA 0.079Ω 0.1MHz
#B952AS-H-220Mp22μH ±20% 2400mA 1900mA 0.087Ω 0.1MHz
#B952AS-H-270Mp27μH ±20% 2200mA 1800mA 0.100Ω 0.1MHz
#B952AS-H-330Mp33μH ±20% 2000mA 1600mA 0.125Ω 0.1MHz
#B952AS-H-390Mp39μH ±20% 1800mA 1400mA 0.150Ω 0.1MHz
#B952AS-H-470Mp47μH ±20% 1700mA 1300mA 0.175Ω 0.1MHz
#B952AS-H-560Mp56μH ±20% 1500mA 1200mA 0.195Ω 0.1MHz
#B952AS-H-680Mp68μH ±20% 1300mA 1100mA 0.240Ω 0.1MHz
#B952AS-H-820Mp82μH ±20% 1200mA 1000mA 0.295Ω 0.1MHz
#B952AS-H-101Mp100μH ±20% 1100mA 900mA 0.380Ω 0.1MHz
#B952AS-H-121Mp120μH ±20% 970mA 800mA 0.460Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
409
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Current Characteristics (Typ.)
6
7
8
9
10
11
07654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
L (100°C)
Temperature Rise Characteristics (Typ.)
6
7
8
9
10
11
07654321
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
L (100°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
410
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DS106C2 Series 4040 (101101) inch (mm)
Appearance/Dimensions
6.8 max.
p10.4 max.
6.0
2.0
3.0
Direction Indication
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
#B966AS-1R2Np1.2μH ±30% 12000mA 7200mA 0.011Ω 0.1MHz
#B966AS-1R8Np1.8μH ±30% 9800mA 6700mA 0.014Ω 0.1MHz
#B966AS-2R7Np2.7μH ±30% 8100mA 6100mA 0.015Ω 0.1MHz
#B966AS-3R9Np3.9μH ±30% 7100mA 5600mA 0.017Ω 0.1MHz
#B966AS-4R7Np4.7μH ±30% 6100mA 5400mA 0.018Ω 0.1MHz
#B966AS-6R8Np6.8μH ±30% 5200mA 5000mA 0.021Ω 0.1MHz
#B966AS-8R2Np8.2μH ±30% 4800mA 4600mA 0.024Ω 0.1MHz
#B966AS-100Mp10μH ±20% 4400mA 4300mA 0.028Ω 0.1MHz
#B966AS-120Mp12μH ±20% 3900mA 3700mA 0.035Ω 0.1MHz
#B966AS-160Mp16μH ±20% 3300mA 2700mA 0.060Ω 0.1MHz
#B966BS-180Mp18μH ±20% 2800mA 2600mA 0.060Ω 0.1MHz
#B966BS-220Mp22μH ±20% 2700mA 2500mA 0.065Ω 0.1MHz
#B966BS-270Mp27μH ±20% 2400mA 2300mA 0.074Ω 0.1MHz
#B966BS-330Mp33μH ±20% 2100mA 2200mA 0.083Ω 0.1MHz
#B966BS-390Mp39μH ±20% 1900mA 2000mA 0.093Ω 0.1MHz
#B966BS-470Mp47μH ±20% 1800mA 1800mA 0.120Ω 0.1MHz
#B966BS-560Mp56μH ±20% 1600mA 1600mA 0.145Ω 0.1MHz
#B966BS-680Mp68μH ±20% 1400mA 1400mA 0.190Ω 0.1MHz
#B966BS-101Mp100μH ±20% 1200mA 1200mA 0.255Ω 0.1MHz
#B966BS-151Mp150μH ±20% 1000mA 970mA 0.385Ω 0.1MHz
#B966BS-221Mp220μH ±20% 840mA 760mA 0.610Ω 0.1MHz
#B966BS-271Mp270μH ±20% 750mA 710mA 0.690Ω 0.1MHz
#B966BS-331Mp330μH ±20% 690mA 680mA 0.760Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
411
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Inductance-Current Characteristics (Typ.)
07654321
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
L (100°C)
5
6
7
8
10
9
11
0
10
20
30
40
50
Temperature Rise Characteristics (Typ.)
07654321
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
L (100°C)
5
6
7
8
10
9
11
0
10
20
30
40
50
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
412
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for Power Lines
DS126C2 Series 4949 (125125) inch (mm)
Appearance/Dimensions
6.8 max.
p12.8 max.
8.5
2.0
3.0
Direction Indication
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Rated Value (p: packaging code)
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
#B953AS-1R7Np1.7μH ±30% 11800mA 7700mA 0.010Ω 0.1MHz
#B953AS-2R7Np2.7μH ±30% 9000mA 7000mA 0.011Ω 0.1MHz
#B953AS-3R9Np3.9μH ±30% 7900mA 6000mA 0.014Ω 0.1MHz
#B953AS-5R6Np5.6μH ±30% 6800mA 5600mA 0.016Ω 0.1MHz
#B953AS-7R5Np7.5μH ±30% 5700mA 5100mA 0.017Ω 0.1MHz
#B953AS-100Mp10μH ±20% 5500mA 4400mA 0.023Ω 0.1MHz
#B953AS-120Mp12μH ±20% 5000mA 4000mA 0.027Ω 0.1MHz
#B953AS-150Mp15μH ±20% 4500mA 3600mA 0.032Ω 0.1MHz
#B953AS-180Mp18μH ±20% 4100mA 3200mA 0.040Ω 0.1MHz
#B953AS-220Mp22μH ±20% 3600mA 2900mA 0.046Ω 0.1MHz
#B953AS-270Mp27μH ±20% 3200mA 2800mA 0.050Ω 0.1MHz
#B953AS-330Mp33μH ±20% 3000mA 2400mA 0.064Ω 0.1MHz
#B953AS-390Mp39μH ±20% 2700mA 2200mA 0.074Ω 0.1MHz
#B953AS-470Mp47μH ±20% 2400mA 2100mA 0.082Ω 0.1MHz
#B953AS-560Mp56μH ±20% 2000mA 1900mA 0.105Ω 0.1MHz
#B953AS-680Mp68μH ±20% 1700mA 1700mA 0.120Ω 0.1MHz
#B953AS-820Mp82μH ±20% 1600mA 1600mA 0.145Ω 0.1MHz
#B953AS-101Mp100μH ±20% 1500mA 1400mA 0.170Ω 0.1MHz
#B953AS-121Mp120μH ±20% 1300mA 1300mA 0.185Ω 0.1MHz
#B953AS-151Mp150μH ±20% 1200mA 1200mA 0.235Ω 0.1MHz
#B953AS-181Mp180μH ±20% 1100mA 1100mA 0.290Ω 0.1MHz
#B953AS-221Mp220μH ±20% 1000mA 1000mA 0.350Ω 0.1MHz
#B953AS-271Mp270μH ±20% 930mA 920mA 0.415Ω 0.1MHz
#B953AS-331Mp330μH ±20% 830mA 830mA 0.495Ω 0.1MHz
#B953AS-391Mp390μH ±20% 760mA 770mA 0.610Ω 0.1MHz
#B953AS-471Mp470μH ±20% 670mA 700mA 0.705Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
413
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance Inductance
Test Frequency
#B953AS-561Mp560μH ±20% 620mA 640mA 0.900Ω 0.1MHz
#B953AS-681Mp680μH ±20% 550mA 580mA 1.120Ω 0.1MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4284A (Keysight) or equivalent.
RDC:
Measured with a Digital Multimeter TR6871 (Advantest) or equivalent.
For reflow soldering only
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20°C.)
Rated current (Itemp) is specified when temperature of inductor the is raised 40°C by DC current. (The ambient reference temperature is 20°C.)
Class of Magnetic Shield: Ferrite Core
Inductance-Current Characteristics (Typ.)
2
4
6
8
10
12
012108642
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
L (100°C)
Temperature Rise Characteristics (Typ.)
2
4
6
8
10
12
012108642
0
10
20
30
40
50
ΔT (°C)
Inductance (μH)
DC Current (A)
ΔT
L (25°C)
L (100°C)
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
414
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Precautions
1. Precaution for Application
1.1 The part must be pre-heated before soldering if reflow is
applied.
The dierence between pre-heat temperature and
soldering temperature must be within 150°C.
1.2 If a soldering iron is applied, the soldering process must
be completed within 4 seconds at a soldering
temperature lower than 350°C.
The tip of the soldering iron must not touch the terminal
electrode in this process.
1.3 Terminals should not be handled with fingers. This is to
prevent deterioration in solderability.
1.4 Soldering using a soldering iron must be done only once
for each part.
1.5 PPCB mount: this part must be handled with care to
minimize any physical stress to the part at the board
assembly process.
1.6 To minimize the influence to the part, the thickness of
PCB, land dimension, and the amount of solder must be
evaluated carefully by individual application.
1.7 If a washing process is applied, please make sure there is
no problem with operating.
1.8 Products should not be dropped on the floor. This is to
prevent damage to the products.
1.9 Although electrical performance is satisfactory, audible
noises may be made if audio frequency ingredient is
contained in current.
Before using, please make sure there aren’t any problem
with operating.
2. Precaution for Storage
Storage condition is critical to maintain an optimum
soldering performance.
2.1 Environmental requirements:
Control ambient temperature at or under 40°C and
70%RH.
Recommended use of the products within 6 months.
2.2 Influence of harmful gas:
Store the products in a place isolated from harmful
gases like sulfur and chlorine.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
415
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Soldering and Mounting
(in mm)
Series Standard Land Dimensions Series Standard Land Dimensions
Continued on the following page.
D63LCB
DEM10050C
DEM2812C
DEM2815C
DEM2818C
DEM3512C
DEM3518C
DEM4518C
DEM8030C
DEM8040C
DEM8045C
DFE201208S
DFE201210S
DFE201210U
D52LC
D53LC
DG6045C
DG6050C
DG8040C
DFE322510C
DFE322512C
DFE322512F
DFE252007F
DFE252008C
DFE252010C
DFE252010F
DFE252010P
DFE252010R
DFE252012C
DFE252012F
DFE252012P
DFE252012R
DFE201610C
DFE201610E
DFE201610P
DFE201610R
DFE201612C
DFE201612E
DFE201612P
DFE201612R
DS126C2
DS104C2
DS106C2
DS75LC
1. Standard Land Dimensions
Land Pattern Solder Resist
4.0
6.0
2.0
4.6
6.6
2.6
0.9 0.91.8
1.2
3.3
5.3
2.2
8.5
5.0
3.0
8.3
Resist Zone
10.5
6.2
5.0
10.0
Resist Zone
0.8
2.4
1.4
2.3
4.3
1.4
8.0
5.0
5.0
8.0
1.8
0.8
2.4
1.8
1.2
2.8
2.0
1.9
3.7
2.8
4.7
1.6 1.6
5.7
Resist Zone
6.2
2.3
2.3
5.2
Resist Zone
7.9
13.1
3.6
5.4
10.7
3.6
4.4
8.4
3.0
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
416
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Soldering and Mounting
(in mm)
Continued from the preceding page.
Series Standard Land Dimensions Series Standard Land Dimensions
FDA1254
FDA1055
FDV0530
FDUE1260
FDVE1040
FDV0618
FDV0620
FDVE0630
FCUL0624
FCUL0630
FCUL1040
FCUL1060
FCUL0530 FDUE1040D
FDUE1245
FDSD0412
FDSD0415
FDSD0420
FDSD0512
FDSD0515
FDSD0518
FDSD0630
FDUE0640
FDUE0650
Land Pattern Solder Resist
3.4
7.0
2.0
2.1 2.14.0
1.9
3.8 3.86.0
4.6
2.0 2.04.3
3.0
7.7
2.9 2.4
2.5 2.55.0
3.0
9.7
2.9 2.4
6.0 3.83.8
4.6
3.0 3.08.0
3.6
4.6 4.66.5
4.0
1.8 1.83.2
3.1
2.0 2.04.0
3.5
3.8 3.86.0
4.0
1.8
4.6
2.4
1.7 1.72.2
2.8
2.0 2.04.0
3.5
4.0 2.12.1
2.5
4.0 2.12.1
3.5
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
417
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Soldering and Mounting
oReflow Soldering Profile 1
Series
Time
Heating
D52LC
D53LC
D63LCB
20 to 40s
Temp.
230°C 250+5/−0°C 2 times
max.
20 to 40s230°C 250+5/−0°C 2 times
max.
20 to 40s230°C 250+5/−0°C 2 times
max.
Peak
Temperature
Cycle
of Flow
Series
Time
Heating
Temp.
Peak
Temperature
Cycle
of Flow
DEM10050C
DEM2812C
DEM2815C
DEM2818C
DEM3512C
DEM3518C
DEM4518C
DEM8030C
DEM8040C
DEM8045C
DFE201208S
DFE201210S
DFE201210U
DFE201610C
DFE201610E
DFE201610P
DFE201610R
DFE201612C
DFE201612E
DFE201612P
DFE201612R
DFE252007F
DFE252008C
DFE252010C
DFE252010F
DFE252010P
DFE252010R
DFE252012C
DFE252012F
DFE252012P
DFE252012R
DFE322510C
DFE322512C
DFE322512F
DG6045C
DG6050C
DG8040C
20 to 40s230°C 250+5/−0°C 2 times
max.
20 to 40s230°C 250+5/−0°C 2 times
max.
20 to 40s230°C 250+5/−0°C 2 times
max.
20 to 40s230°C 250+5/−0°C 2 times
max.
20 to 40s230°C 250+5/−0°C 2 times
max.
20 to 40s230°C 250+5/−0°C 2 times
max.
20 to 40s230°C 250+5/−0°C 2 times
max.
DS104C2
DS106C2
DS126C2
DS75LC
FCUL0530
FCUL0624
FCUL0630
FCUL1040
FCUL1060
FDA1055
FDA1254
FDSD0412
FDSD0415
FDSD0420
FDSD0512
FDSD0515
FDSD0518
FDSD0630
FDUE0640
FDUE0650
FDUE1040D
FDUE1245
FDUE1260
FDV0530
FDV0618
FDV0620
FDVE0630
FDVE1040
*Reflow Times: 2 times max.
*We recommend an infrared ray as the heat source of the reflow bath.
However halogen lamp should not be used; the side heat would be
beyond the range of resistance heat, so we do not recommend it.
150°C
180°C
200
100
300
Temperature (°C)
90±30s
30±10s
230°C min.
250+5 °C
Heating Time (s)
-0
2. Standard Soldering Profile
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
418
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Reel Packaging
Surface Mount Devices/Adjustable & Fixed !Notes
Taping for Automatic Insertion of SMT Coils
This ever-expanding assortment of products and
unsurpassed quality control not only give you a component
that functionally performs, but just as importantly, allows
the use of a variety of placement and soldering equipment
necessary for the FLEXIBLE MANUFACTURING PLANT
required in today's competitive world.
Various packaging schemes are available. In addition to bulk,
tape and reel, and magazine, methods are oered for high
volume insertion equipment. The following chart lists the
packaging details for SMD coils:
(1) There are at least 10 blank spaces (80mm each) at both
ends of the tape that do not include the coils.
(2) The protective tape should not cover the holes nor be
shied to the sides. Further, the tape should not be
removed during transportation.
(3) The coils are positioned with the bonding surface facing
the bottom of the pocket.
(4) Dimensional tolerances conform to Japan Industrial
Standard JIS C 0806-3, Packaging of components for
automatic handling— Part3: Packaging of surface mount
components on continuous tapes.
Continued on the following page.
(in mm)
Surface Mounting Type, Reel/Tape List
DFE201208S
DFE201210S
DFE201610C
DFE201612C
DFE252008C
DFE252010C
DFE252012C
DFE322510C
DFE322512C
DFE201610R
DFE201612R
DFE252010R
DFE252012R
DFE201610P
DFE201612P
DFE252010P
DFE252012P
DFE201610E
Series IHGFEDCB2B1
A
Reel Size (mm) Tape Size (mm) Q'ty
1 Reel
Tape and Reel Dimensions
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
1.1±0.1
1.1±0.1
1.1±0.1
1.3±0.1
1.1±0.1
1.1±0.1
1.3±0.1
1.1±0.1
1.4±0.1
1.1±0.1
1.3±0.1
1.1±0.1
1.3±0.1
1.1±0.1
1.3±0.1
1.1±0.1
1.3±0.1
1.1±0.1
2.25±0.1
2.25±0.1
2.25±0.1
2.25±0.1
2.75±0.1
2.75±0.1
2.75±0.1
3.5±0.1
3.6±0.1
2.25±0.1
2.25±0.1
2.75±0.1
2.75±0.1
2.25±0.1
2.25±0.1
2.75±0.1
2.75±0.1
2.25±0.1
1.85±0.1
1.85±0.1
1.85±0.1
1.85±0.1
2.20±0.1
2.20±0.1
2.20±0.1
2.80±0.1
2.90±0.1
1.85±0.1
1.85±0.1
2.20±0.1
2.20±0.1
1.85±0.1
1.85±0.1
2.20±0.1
2.20±0.1
1.85±0.1
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
ø180
1.75±0.2
4±0.1
I
2±0.1
E
AB1
B2
G
H
F
D
C
ø1.5
ø13±0.2 ø21±0.8
ø80±1
*1 ø254 Reel: ø100±1
*1
ø10
120
120
+0.1
0
Covering Tape
22
0.2
0.4
0.6
0.8
2
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
419
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for Power Lines Reel Packaging
DFE201612E
DFE201210U
DFE252007F
DFE252010F
DFE252012F
DFE322512F
FDSD0412
FDSD0415
FDSD0420
FDSD0512
FDSD0515
FDSD0518
FDSD0630
FDV0530
FDV0618
FDV0620
FDVE0630
FDVE1040
FDUE0640
FDUE0650
FDUE1040D
FDUE1245
FDUE1260
FDA1055
FDA1254
FCUL0530
FCUL0624
FCUL0630
FCUL1040
FCUL1060
DEM2812C
DEM2815C
DEM2818C
DEM3512C
DEM3518C
DEM4518C
D52LC
D53LC
D63LCB
DG6045C
DG6050C
DS75LC
DG8040C
DS85LCB
DEM8030C
DEM8040C
DEM8045C
DEM10050C
DS104C2
DS106C2
DS126C2
Series IHGFEDCB2B1
A
Reel Size (mm) Tape Size (mm) Q'ty
1 Reel
Continued from the preceding page.
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
8.0±0.1
8.0±0.1
8.0±0.1
8.0±0.1
8.0±0.1
8.0±0.1
12.0±0.1
12.0±0.1
12.0±0.1
12.0±0.1
12.0±0.1
16.0±0.1
12.0±0.1
12.0±0.1
16.0±0.1
16.0±0.1
16.0±0.1
16.0±0.1
16.0±0.1
12.0±0.1
12.0±0.1
12.0±0.1
16.0±0.1
16.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
8.0±0.1
8.0±0.1
8.0±0.1
8.0±0.1
8.0±0.1
12.0±0.1
8.0±0.1
8.0±0.1
12.0±0.1
12.0±0.1
16.0±0.1
12.0±0.1
12.0±0.1
12.0±0.1
16.0±0.1
16.0±0.1
16.0±0.1
16.0±0.1
3000
3000
3000
3000
3000
3000
4000
4000
2000
4000
4000
2000
1000
1000
1500
1500
1000
500
1000
1000
500
500
500
500
500
1000
1500
1000
500
500
2000
2000
2000
2000
2000
2000
2000
2000
1500
1500
1500
1000
1000
500
1000
1000
1000
500
500
500
500
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.25±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.4±0.05
0.4±0.05
0.3±0.05
0.4±0.1
0.4±0.1
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
0.4±0.05
1.3±0.1
1.1±0.1
1.1±0.1
1.1±0.1
1.3±0.1
1.4±0.1
1.5±0.1
1.8±0.1
2.2±0.1
1.5±0.1
1.8±0.1
2.1±0.1
3.3±0.1
3.3±0.1
2.2±0.1
2.2±0.1
3.3±0.1
4.3±0.1
4.3±0.1
5.3±0.1
4.3±0.1
4.7±0.1
6.3±0.1
5.7±0.1
5.7±0.1
3.3±0.1
2.7±0.1
3.3±0.1
4.3±0.1
6.3±0.1
1.5±0.1
1.8±0.1
2.1±0.1
1.4±0.1
2.0±0.1
2.0±0.1
2.4±0.1
3.4±0.1
3.25±0.1
4.7±0.1
5.6±0.1
5.4±0.1
4.2±0.1
5.1±0.1
3.2±0.1
4.2±0.1
4.7±0.1
5.2±0.1
4.2±0.1
6.9±0.1
6.9±0.1
2.25±0.1
2.25±0.1
2.25±0.1
2.75±0.1
2.75±0.1
3.6±0.1
4.4±0.1
4.4±0.1
4.4±0.1
5.6±0.1
5.6±0.1
5.6±0.1
7.8±0.1
6.6±0.1
7.8±0.1
7.8±0.1
7.8±0.1
12.1±0.1
8.0±0.1
7.8±0.1
12.1±0.1
13.7±0.1
14.7±0.1
12.0±0.1
13.9±0.1
6.6±0.1
7.8±0.1
7.8±0.1
12.1±0.1
12.0±0.1
3.25±0.1
3.25±0.1
3.25±0.1
3.95±0.1
3.95±0.1
4.95±0.1
5.3±0.1
5.3±0.1
6.3±0.1
6.4±0.1
6.4±0.1
7.8±0.1
8.4±0.1
8.5±0.1
8.4±0.1
8.4±0.1
8.4±0.1
10.6±0.1
10.5±0.1
10.5±0.1
12.9±0.1
1.85±0.1
1.85±0.1
1.85±0.1
2.20±0.1
2.20±0.1
2.90±0.1
4.4±0.1
4.4±0.1
4.4±0.1
5.3±0.1
5.3±0.1
5.3±0.1
7.0±0.1
6.2±0.1
7.0±0.1
7.0±0.1
7.1±0.1
10.5±0.1
7.0±0.1
7.0±0.1
10.5±0.1
12.3±0.1
12.9±0.1
11.1±0.1
12.9±0.1
6.2±0.1
7.1±0.1
7.1±0.1
10.5±0.1
11.1±0.1
3.05±0.1
3.05±0.1
3.05±0.1
3.75±0.1
3.75±0.1
4.75±0.1
5.3±0.1
5.3±0.1
6.2±0.1
6.4±0.1
6.4±0.1
7.8±0.1
8.4±0.1
8.4±0.1
8.4±0.1
8.4±0.1
8.4±0.1
10.6±0.1
10.5±0.1
10.5±0.1
12.9±0.1
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
3.5±0.05
5.5±0.05
5.5±0.05
5.5±0.05
5.5±0.05
5.5±0.05
5.5±0.05
7.5±0.1
7.5±0.1
7.5±0.1
7.5±0.1
7.5±0.1
11.5±0.1
7.5±0.1
7.5±0.1
11.5±0.1
11.5±0.1
11.5±0.1
11.5±0.1
11.5±0.1
7.5±0.1
7.5±0.1
7.5±0.1
11.5±0.1
11.5±0.1
3.5±0.05
3.5±0.05
3.5±0.05
5.5±0.05
5.5±0.05
5.5±0.05
5.5±0.1
5.5±0.1
5.5±0.05
5.5±0.1
5.5±0.1
7.5±0.1
7.5±0.1
11.5±0.1
7.5±0.1
7.5±0.1
7.5±0.1
11.5±0.1
11.5±0.1
11.5±0.1
11.5±0.1
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
8.0±0.2
12.0±0.3
12.0±0.3
12.0±0.3
12.0±0.3
12.0±0.3
12.0±0.3
16.0±0.3
16.0±0.3
16.0±0.3
16.0±0.3
16.0±0.3
24.0±0.3
16.0±0.3
16.0±0.3
24.0±0.3
24.0±0.3
24.0±0.3
24.0±0.3
24.0±0.3
16.0±0.3
16.0±0.3
16.0±0.3
24.0±0.3
24.0±0.3
8.0±0.2
8.0±0.2
8.0±0.2
12.0±0.3
12.0±0.3
12.0±0.3
12.0±0.3
12.0±0.3
12.0±0.3
12.0±0.3
12.0±0.3
16.0±0.3
16.0±0.3
24.0±0.3
16.0±0.3
16.0±0.3
16.0±0.3
24.0±0.3
24.0±0.3
24.0±0.3
24.0±0.3
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
11.4±1
17.5±1
17.5±1
17.5±1
21.5±1
21.5±1
21.5±1
21.5±1
21.5±1
21.5±1
21.5±1
21.5±1
29.5±1
21.5±1
21.5±1
29.5±1
29.5±1
29.5±1
29.5±1
29.5±1
21.5±1
21.5±1
21.5±1
29.5±1
29.5±1
11.4±1
11.4±1
11.4±1
17.5±1
17.5±1
17.5±1
17.5±1
17.5±1
17.5±1
17.5±1
17.5±1
21.5±1
21.5±1
29.5±1
21.5±1
21.5±1
21.5±1
29.5±1
29.5±1
29.5±1
29.5±1
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
9.0±0.3
13.5±0.5
13.5±0.5
13.5±0.5
17.5±0.5
17.5±0.5
17.5±0.5
17.5±0.5
17.5±0.5
17.5±0.5
17.5±0.5
17.5±0.5
25.5±0.5
17.5±0.5
17.5±0.5
25.5±0.5
25.5±0.5
25.5±0.5
25.5±0.5
25.5±0.5
17.5±0.5
17.5±0.5
17.5±0.5
25.5±0.5
25.5±0.5
9.0±0.5
9.0±0.5
9.0±0.5
13.5±0.5
13.5±0.5
13.5±0.5
13.5±0.5
13.5±0.5
13.5±0.5
13.5±0.5
13.5±0.5
17.5±0.5
17.5±0.5
25.5±0.5
17.5±0.5
17.5±0.5
17.5±0.5
25.5±0.5
25.5±0.5
25.5±0.5
25.5±0.5
ø180
ø180
ø180
ø180
ø180
ø180
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø180
ø180
ø180
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
ø330
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
420
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Product Detail p422
!Caution/Notice p427
Soldering and Mounting p428
Packaging p430
TOKO Products
Inductors for General Circuits
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
421
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for General Circuits
LLB2520 Series 1008 (2520) inch (mm)
Appearance/Dimensions
1.7 max.
0.4 0.4
1.4
2.5
Inductance ID
Type & Rotation ID
0.5
2.0
(
Tolerance: ±0.2
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current S.R.F.* (min.) Inductance
Test Frequency Max. of DC Resistance
#FSLB2520-1R0Mp1.0μH ±20% 480mA 130MHz 1MHz 0.30Ω
#FSLB2520-1R5Mp1.5μH ±20% 435mA 95MHz 1MHz 0.38Ω
#FSLB2520-2R2Mp2.2μH ±20% 390mA 75MHz 1MHz 0.44Ω
#FSLB2520-3R3Mp3.3μH ±20% 340mA 60MHz 1MHz 0.57Ω
#FSLB2520-4R7Mp4.7μH ±20% 310mA 50MHz 1MHz 0.68Ω
#FSLB2520-6R8Mp6.8μH ±20% 295mA 40MHz 1MHz 0.89Ω
#FSLB2520-100Kp10μH ±10% 220mA 33MHz 1MHz 1.10Ω
#FSLB2520-150Kp15μH ±10% 180mA 28MHz 1MHz 1.70Ω
#FSLB2520-220Kp22μH ±10% 160mA 23MHz 1MHz 2.50Ω
#FSLB2520-330Kp33μH ±10% 130mA 18MHz 1MHz 3.80Ω
#FSLB2520-470Kp47μH ±10% 100mA 15MHz 1MHz 5.40Ω
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4291A (Keysight).
RDC:
Measured with a Digital Multimeter TR6871 (Advantest).
For reflow soldering only
Previous Series Name: FSLB2520
*S.R.F.: Self-Resonant Frequency
Rated current is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20°C.)
OR rated current is specified when temperature of inductor the is raised 20°C by DC current. (The ambient reference temperature is 20°C.)
Whichever is smaller.
Class of Magnetic Shield: No Shield
Q-Frequency Characteristics (Typ.)
Frequency (MHz)
Q
0
5
10
15
20
25
30
35
0.1 101
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
422
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for General Circuits
LLM2520 Series 1008 (2520) inch (mm)
Appearance/Dimensions
1.7 max.
0.4 0.4
1.4
2.5
0.5
2.0
Inductance ID
Type & Rotation ID
(
Tolerance: ±0.2
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current Q (min.) S.R.F.* (min.) Inductance
Test Frequency Max. of DC Resistance Q Test Frequency
#FSLM2520-R10Jp0.1μH ±5% 570mA 30 680MHz 25.2MHz 0.21Ω 25.2MHz
#FSLM2520-R12Jp0.12μH ±5% 550mA 30 650MHz 25.2MHz 0.22Ω 25.2MHz
#FSLM2520-R15Jp0.15μH ±5% 500mA 30 530MHz 25.2MHz 0.25Ω 25.2MHz
#FSLM2520-R18Jp0.18μH ±5% 460mA 30 520MHz 25.2MHz 0.29Ω 25.2MHz
#FSLM2520-R22Jp0.22μH ±5% 430mA 30 390MHz 25.2MHz 0.30Ω 25.2MHz
#FSLM2520-R27Jp0.27μH ±5% 420mA 30 330MHz 25.2MHz 0.33Ω 25.2MHz
#FSLM2520-R33Jp0.33μH ±5% 400mA 30 310MHz 25.2MHz 0.39Ω 25.2MHz
#FSLM2520-R39Jp0.39μH ±5% 375mA 30 290MHz 25.2MHz 0.40Ω 25.2MHz
#FSLM2520-R47Jp0.47μH ±5% 350mA 30 260MHz 25.2MHz 0.44Ω 25.2MHz
#FSLM2520-R56Jp0.56μH ±5% 330mA 30 230MHz 25.2MHz 0.49Ω 25.2MHz
#FSLM2520-R68Jp0.68μH ±5% 320mA 30 200MHz 25.2MHz 0.52Ω 25.2MHz
#FSLM2520-R82Jp0.82μH ±5% 290mA 30 180MHz 25.2MHz 0.61Ω 25.2MHz
#FSLM2520-1R0Jp1.0μH ±5% 250mA 30 150MHz 7.96MHz 0.75Ω 7.96MHz
#FSLM2520-1R2Jp1.2μH ±5% 240mA 30 140MHz 7.96MHz 0.87Ω 7.96MHz
#FSLM2520-1R5Jp1.5μH ±5% 230mA 30 130MHz 7.96MHz 1.00Ω 7.96MHz
#FSLM2520-1R8Jp1.8μH ±5% 220mA 30 120MHz 7.96MHz 1.10Ω 7.96MHz
#FSLM2520-2R2Jp2.2μH ±5% 210mA 30 105MHz 7.96MHz 1.30Ω 7.96MHz
#FSLM2520-2R7Jp2.7μH ±5% 200mA 30 90MHz 7.96MHz 1.40Ω 7.96MHz
#FSLM2520-3R3Jp3.3μH ±5% 190mA 30 80MHz 7.96MHz 1.60Ω 7.96MHz
#FSLM2520-3R9Jp3.9μH ±5% 185mA 30 75MHz 7.96MHz 1.70Ω 7.96MHz
#FSLM2520-4R7Jp4.7μH ±5% 180mA 30 70MHz 7.96MHz 1.90Ω 7.96MHz
#FSLM2520-5R6Jp5.6μH ±5% 170mA 30 60MHz 7.96MHz 2.20Ω 7.96MHz
#FSLM2520-6R8Jp6.8μH ±5% 165mA 30 55MHz 7.96MHz 2.40Ω 7.96MHz
#FSLM2520-8R2Jp8.2μH ±5% 160mA 30 50MHz 7.96MHz 2.60Ω 7.96MHz
#FSLM2520-100Jp10μH ±5% 155mA 25 30MHz 2.52MHz 2.20Ω 2.52MHz
#FSLM2520-120Jp12μH ±5% 150mA 25 27MHz 2.52MHz 2.50Ω 2.52MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4194A or 4291A (Keysight).
RDC:
Measured with a Digital Multimeter TR6871 (Advantest).
For reflow soldering only
Previous Series Name: FSLM2520
*S.R.F.: Self-Resonant Frequency
Rated current is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20°C.)
OR rated current is specified when temperature of inductor the is raised 20°C by DC current. (The ambient reference temperature is 20°C.)
Whichever is smaller.
Class of Magnetic Shield: No Shield
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
423
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Rated Current Q (min.) S.R.F.* (min.) Inductance
Test Frequency Max. of DC Resistance Q Test Frequency
#FSLM2520-150Jp15μH ±5% 140mA 25 23MHz 2.52MHz 2.80Ω 2.52MHz
#FSLM2520-180Jp18μH ±5% 130mA 25 22MHz 2.52MHz 3.20Ω 2.52MHz
#FSLM2520-220Jp22μH ±5% 125mA 25 21MHz 2.52MHz 3.60Ω 2.52MHz
#FSLM2520-270Jp27μH ±5% 115mA 25 19MHz 2.52MHz 4.30Ω 2.52MHz
#FSLM2520-330Jp33μH ±5% 110mA 25 17MHz 2.52MHz 4.70Ω 2.52MHz
#FSLM2520-390Jp39μH ±5% 85mA 25 15MHz 2.52MHz 8.10Ω 2.52MHz
#FSLM2520-470Jp47μH ±5% 80mA 25 14MHz 2.52MHz 8.80Ω 2.52MHz
#FSLM2520-560Jp56μH ±5% 75mA 25 12.5MHz 2.52MHz 10.0Ω 2.52MHz
#FSLM2520-680Jp68μH ±5% 70mA 25 12MHz 2.52MHz 11.5Ω 2.52MHz
#FSLM2520-820Jp82μH ±5% 65mA 25 11MHz 2.52MHz 12.5Ω 2.52MHz
#FSLM2520-101Jp100μH ±5% 60mA 15 10MHz 0.796MHz 13.0Ω 0.796MHz
#FSLM2520-121Jp120μH ±5% 55mA 15 8MHz 0.796MHz 19.0Ω 0.796MHz
#FSLM2520-151Jp150μH ±5% 50mA 15 7.5MHz 0.796MHz 22.0Ω 0.796MHz
#FSLM2520-181Jp180μH ±5% 47mA 15 7MHz 0.796MHz 25.0Ω 0.796MHz
#FSLM2520-221Jp220μH ±5% 44mA 15 6.5MHz 0.796MHz 28.0Ω 0.796MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4194A or 4291A (Keysight).
RDC:
Measured with a Digital Multimeter TR6871 (Advantest).
For reflow soldering only
Previous Series Name: FSLM2520
*S.R.F.: Self-Resonant Frequency
Rated current is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20°C.)
OR rated current is specified when temperature of inductor the is raised 20°C by DC current. (The ambient reference temperature is 20°C.)
Whichever is smaller.
Class of Magnetic Shield: No Shield
Q-Frequency Characteristics (Typ.)
Frequency (MHz)
Q
2.2μH
0
10
20
30
40
50
60
70
110010
22μH
0.22μH
220μH
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
424
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
TOKO Products Inductors for General Circuits
LLM3225 Series 1210 (3225) inch (mm)
Appearance/Dimensions
2.4 max.
0.4 0.4
1.9
3.2
0.5
2.5
Inductance ID
Type & Rotation ID
(
Tolerance: ±0.2
in mm
)
Packaging
Code Packaging Minimum
Quantity
No Code ø180mm Embossed Taping 2000
Rated Value (p: packaging code)
Part Number Inductance Rated Current Q (min.) S.R.F.* (min.) Inductance
Test Frequency Max. of DC Resistance Q Test Frequency
LLM3225-R10J 0.1μH ±5% 600mA 35 540MHz 25.2MHz 0.20Ω 25.2MHz
LLM3225-R12J 0.12μH ±5% 580mA 35 480MHz 25.2MHz 0.20Ω 25.2MHz
LLM3225-R15J 0.15μH ±5% 560mA 35 420MHz 25.2MHz 0.20Ω 25.2MHz
LLM3225-R18J 0.18μH ±5% 540mA 35 380MHz 25.2MHz 0.25Ω 25.2MHz
LLM3225-R22J 0.22μH ±5% 520mA 35 320MHz 25.2MHz 0.30Ω 25.2MHz
LLM3225-R27J 0.27μH ±5% 500mA 35 260MHz 25.2MHz 0.30Ω 25.2MHz
LLM3225-R33J 0.33μH ±5% 480mA 35 230MHz 25.2MHz 0.35Ω 25.2MHz
LLM3225-R39J 0.39μH ±5% 460mA 35 200MHz 25.2MHz 0.40Ω 25.2MHz
LLM3225-R47J 0.47μH ±5% 440mA 35 170MHz 25.2MHz 0.40Ω 25.2MHz
LLM3225-R56J 0.56μH ±5% 420mA 35 150MHz 25.2MHz 0.45Ω 25.2MHz
LLM3225-R68J 0.68μH ±5% 400mA 35 130MHz 25.2MHz 0.50Ω 25.2MHz
LLM3225-R82J 0.82μH ±5% 380mA 35 110MHz 25.2MHz 0.55Ω 25.2MHz
LLM3225-1R0J 1.0μH ±5% 370mA 35 140MHz 7.96MHz 0.50Ω 7.96MHz
LLM3225-1R2J 1.2μH ±5% 350mA 35 120MHz 7.96MHz 0.55Ω 7.96MHz
LLM3225-1R5J 1.5μH ±5% 330mA 35 100MHz 7.96MHz 0.60Ω 7.96MHz
LLM3225-1R8J 1.8μH ±5% 315mA 35 95MHz 7.96MHz 0.65Ω 7.96MHz
LLM3225-2R2J 2.2μH ±5% 300mA 35 90MHz 7.96MHz 0.70Ω 7.96MHz
LLM3225-2R7J 2.7μH ±5% 280mA 35 80MHz 7.96MHz 0.80Ω 7.96MHz
LLM3225-3R3J 3.3μH ±5% 265mA 35 70MHz 7.96MHz 0.90Ω 7.96MHz
LLM3225-3R9J 3.9μH ±5% 250mA 30 60MHz 7.96MHz 1.00Ω 7.96MHz
LLM3225-4R7J 4.7μH ±5% 240mA 30 55MHz 7.96MHz 1.20Ω 7.96MHz
LLM3225-5R6J 5.6μH ±5% 230mA 30 50MHz 7.96MHz 1.40Ω 7.96MHz
LLM3225-6R8J 6.8μH ±5% 220mA 30 45MHz 7.96MHz 1.60Ω 7.96MHz
LLM3225-8R2J 8.2μH ±5% 210mA 30 40MHz 7.96MHz 1.80Ω 7.96MHz
LLM3225-100J 10μH ±5% 220mA 30 27MHz 2.52MHz 1.70Ω 2.52MHz
LLM3225-120J 12μH ±5% 200mA 30 23MHz 2.52MHz 1.90Ω 2.52MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4194A or 4291A (Keysight).
RDC:
Measured with a Digital Multimeter TR6871 (Advantest).
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Rated current is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20°C.)
OR rated current is specified when temperature of inductor the is raised 20°C by DC current. (The ambient reference temperature is 20°C.)
Whichever is smaller.
Class of Magnetic Shield: No Shield
Continued on the following page.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
425
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Continued from the preceding page.
Part Number Inductance Rated Current Q (min.) S.R.F.* (min.) Inductance
Test Frequency Max. of DC Resistance Q Test Frequency
LLM3225-150J 15μH ±5% 180mA 30 20MHz 2.52MHz 2.20Ω 2.52MHz
LLM3225-180J 18μH ±5% 160mA 30 18MHz 2.52MHz 2.50Ω 2.52MHz
LLM3225-220J 22μH ±5% 140mA 30 16MHz 2.52MHz 2.80Ω 2.52MHz
LLM3225-270J 27μH ±5% 120mA 30 15MHz 2.52MHz 4.20Ω 2.52MHz
LLM3225-330J 33μH ±5% 110mA 30 14MHz 2.52MHz 4.80Ω 2.52MHz
LLM3225-390J 39μH ±5% 100mA 30 13MHz 2.52MHz 5.40Ω 2.52MHz
LLM3225-470J 47μH ±5% 95mA 30 12MHz 2.52MHz 6.00Ω 2.52MHz
LLM3225-560J 56μH ±5% 90mA 30 11MHz 2.52MHz 7.00Ω 2.52MHz
LLM3225-680J 68μH ±5% 85mA 30 10MHz 2.52MHz 8.00Ω 2.52MHz
LLM3225-820J 82μH ±5% 80mA 30 9MHz 2.52MHz 9.00Ω 2.52MHz
LLM3225-101J 100μH ±5% 70mA 20 9MHz 0.796MHz 9.00Ω 0.796MHz
LLM3225-121J 120μH ±5% 65mA 20 8MHz 0.796MHz 10.0Ω 0.796MHz
LLM3225-151J 150μH ±5% 60mA 20 7MHz 0.796MHz 11.0Ω 0.796MHz
LLM3225-181J 180μH ±5% 55mA 20 6.5MHz 0.796MHz 12.0Ω 0.796MHz
LLM3225-221J 220μH ±5% 45mA 20 6MHz 0.796MHz 20.0Ω 0.796MHz
LLM3225-271J 270μH ±5% 43mA 20 5.5MHz 0.796MHz 23.0Ω 0.796MHz
LLM3225-331J 330μH ±5% 40mA 20 5MHz 0.796MHz 26.0Ω 0.796MHz
LLM3225-391J 390μH ±5% 35mA 20 4.5MHz 0.796MHz 29.0Ω 0.796MHz
LLM3225-471J 470μH ±5% 31mA 20 4MHz 0.796MHz 32.0Ω 0.796MHz
LLM3225-561J 560μH ±5% 28mA 20 3.6MHz 0.796MHz 50.0Ω 0.796MHz
LLM3225-681J 680μH ±5% 25mA 20 3.3MHz 0.796MHz 55.0Ω 0.796MHz
LLM3225-821J 820μH ±5% 22mA 20 3MHz 0.796MHz 60.0Ω 0.796MHz
LLM3225-102J 1000μH ±5% 19mA 10 2.5MHz 0.252MHz 70.0Ω 0.252MHz
Operating temp. range (Self-temp. rise included): -40 to 85°C
Inductance:
Measured with an LCR meter 4194A or 4291A (Keysight).
RDC:
Measured with a Digital Multimeter TR6871 (Advantest).
For reflow soldering only
*S.R.F.: Self-Resonant Frequency
Rated current is specified when the decrease of the initial inductance value at 10%. (The ambient reference temperature is 20°C.)
OR rated current is specified when temperature of inductor the is raised 20°C by DC current. (The ambient reference temperature is 20°C.)
Whichever is smaller.
Class of Magnetic Shield: No Shield
Q-Frequency Characteristics (Typ.)
xx1J
0
10
20
30
40
50
60
70
80
0.1 1 10 100
xx0J
1RxJ
RxxJ
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
426
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Use Precautions
1. Precaution for Application
1.1 The part must be pre-heated before soldering if reflow is
applied.
The dierence between pre-heat temperature and
soldering temperature must be within 150°C.
1.2 If a soldering iron is applied, the soldering process must
be completed within 4 seconds at a soldering
temperature lower than 350°C.
The tip of the soldering iron must not touch the terminal
electrode in this process.
1.3 Terminals should not be handled with fingers. This is to
prevent deterioration in solderability.
1.4 Soldering using a soldering iron must be done only once
for each part.
1.5 PCB mount: this part must be handled with care to
minimize any physical stress to the part at the board
assembly process.
1.6 To minimize the influence to the part, the thickness of
PCB, land dimension, and the amount of solder must be
evaluated carefully by individual application.
1.7 If a washing process is applied, please make sure there is
no problem with operating.
1.8 Products should not be dropped on the floor. This is to
prevent damage to the products.
1.9 Although electrical performance is satisfactory, audible
noises may be made if audio frequency ingredient is
contained in current.
Before using, please make sure there aren’t any problem
with operating.
2. Precaution for Storage
Storage condition is critical to maintain an optimum
soldering performance.
2.1 Environmental requirements:
Control ambient temperature at or under 40°C and
70%RH.
Recommended use of the products within 6 months.
2.2 Influence of harmful gas:
Store the products in a place isolated from harmful
gases like sulfur and chlorine.
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
427
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Use Soldering and Mounting
Series Standard Land Dimensions
(in mm)
LLM3225
LLB2520
LLM2520
1. Standard Land Dimensions
Land Pattern Solder Resist
1.0 1.0
2.0
2.0
1.5 1.21.2
1.5
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
428
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Use Soldering and Mounting
oReflow Soldering Profile 2
Series
Time
Heating
LLB2520
LLM2520
LLM3225
30 to 40s
Temp.
230°C 260°C max. 2 times
max.
Peak
Temperature
Cycle
of Flow
230
260
180
150
Part Surface Temperature (°C)
60 to 120s
30 to 40s
Time (s)
*Preheat: Temperature 150 to 180°C, Time 60 to 120 sec.
Peak: Temperature 260°C (230°C over, 30 to 40 sec.)
*Reflow Possibility Times: 2 times
2. Standard Soldering Profile
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
429
Inductors for Power LinesInductors for General CircuitsRF InductorsTOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Inductors for General Use Reel Packaging
Surface Mount Devices/Adjustable & Fixed !Notes
Taping for Automatic Insertion of SMT Coils
(in mm)
Surface Mounting Type, Reel/Tape List
LLM2520
LLB2520
LLM3225
4.0±0.1
4.0±0.1
4.0±0.1
2000
2000
2000
0.3±0.05
0.3±0.05
0.3±0.05
1.95±0.1
1.95±0.1
2.55±0.1
2.7±0.1
2.7±0.1
3.55±0.1
2.30±0.1
2.30±0.1
2.80±0.1
3.5±0.05
3.5±0.05
3.5±0.05
8.0±0.2
8.0±0.2
8.0±0.2
11.4±1
11.4±1
11.4±1
9.0±0.3
9.0±0.3
9.0±0.3
ø180
ø180
ø180
Tape and Reel Dimensions
This ever-expanding assortment of products and
unsurpassed quality control not only give you a component
that functionally performs, but just as importantly, allows
the use of a variety of placement and soldering equipment
necessary for the FLEXIBLE MANUFACTURING PLANT
required in today's competitive world.
Various packaging schemes are available. In addition to bulk,
tape and reel, and magazine, methods are oered for high
volume insertion equipment. The following chart lists the
packaging details for SMD coils:
(1) There are at least 10 blank spaces (80mm each) at both
ends of the tape that do not include the coils.
(2) The protective tape should not cover the holes nor be
shied to the sides. Further, the tape should not be
removed during transportation.
(3) The coils are positioned with the bonding surface facing
the bottom of the pocket.
(4) Dimensional tolerances conform to Japan Industrial
Standard JIS C 0806-3, Packaging of components for
automatic handling— Part3: Packaging of surface mount
components on continuous tapes.
Series IHGFEDCB2B1
A
Reel Size (mm) Tape Size (mm) Q'ty
1 Reel
1.75±0.2
4±0.1
I
2±0.1
E
AB1
B2
G
H
F
D
C
ø13±0.2 ø21±0.8
ø80±1
*1 ø254 Reel: ø100±1
*1
ø10
120
120
Covering Tape
ø1.5+0.1
0
22
0.2
0.4
0.6
0.8
2
O05E.pdf
Apr.28,2017
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
430
Inductors for Power LinesInductors for General CircuitsRF Inductors
TOKO Products
Inductors for Power Lines
TOKO Products
Inductors for General Circuits
Murata Manufacturing Co., Ltd.
www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specifi ed by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1 Aircra equipment
2 Aerospace equipment
3 Undersea equipment
4 Power plant equipment
5 Medical equipment
6 Transportation equipment (vehicles, trains,
ships, etc.)
7 Tra c signal equipment
8 Disaster prevention / crime prevention
equipment
9 Data-processing equipment
10 Application of similar complexity and/or
reliability requirements to the applications
listed above
3 Product specifi cations in this catalog are as of
November 2016. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifi cations.
Therefore, please approve our product
specifi cations or transact the approval sheet
for product specifi cations before ordering.
6 Please note that unless otherwise specifi ed, we
shall assume no responsibility whatsoever for any
confl ict or dispute that may occur in connection
with the e ect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the e ect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Global Locations
For details please visit www.murata.com
Cat. No. O05E-26
O05E.pdf
Apr.28,2017
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Murata:
LQG15HN15NJ00D LQG15HN1N5S00D LQG15HN4N7S00D LQG18HN47NJ00D LQG18HN5N6S00D
LQG18HN6N8J00D LQG18HN8N2J00D LQG18HNR10J00D LQG10A18NJ00T1 LQG15HN10NJ00D
LQG15HN10NJ02D LQG15HN12NJ00D LQG15HN12NJ02D LQG15HN15NJ02D LQG15HN18NJ00D
LQG15HN18NJ02D LQG15HN1N0S02D LQG15HN1N1S02D LQG15HN1N2S00D LQG15HN1N2S02D
LQG15HN1N3S02D LQG15HN1N5S02D LQG15HN1N6S02D LQG15HN1N8S00D LQG15HN1N8S02D
LQG15HN22NJ00D LQG15HN22NJ02D LQG15HN27NJ00D LQG15HN27NJ02D LQG15HN2N0S02D
LQG15HN2N2S00D LQG15HN2N2S02D LQG15HN2N4S02D LQG15HN2N7S00D LQG15HN2N7S02D
LQG15HN33NJ00D LQG15HN33NJ02D LQG15HN39NJ02D LQG15HN3N0S02D LQG15HN3N3S00D
LQG15HN3N3S02D LQG15HN3N6S02D LQG15HN3N9S00D LQG15HN3N9S02D LQG15HN47NJ02D
LQG15HN4N3S02D LQG15HN4N7S02D LQG15HN56NJ02D LQG15HN5N1S02D LQG15HN5N6S00D
LQG15HN5N6S02D LQG15HN68NJ00D LQG15HN68NJ02D LQG15HN6N2S02D LQG15HN6N8J00D
LQG15HN6N8J02D LQG15HN7N5J02D LQG15HN82NJ02D LQG15HN8N2J00D LQG15HN8N2J02D
LQG15HN9N1J02D LQG15HNR10J02D LQG15HNR12J02D LQG15HS10NJ02D LQG15HS12NJ02D
LQG15HS15NJ02D LQG15HS18NJ02D LQG15HS1N0S02D LQG15HS1N2S02D LQG15HS1N5S02D
LQG15HS1N8S02D LQG15HS22NJ02D LQG15HS27NJ02D LQG15HS2N2S02D LQG15HS2N7S02D
LQG15HS33NJ02D LQG15HS39NJ02D LQG15HS3N3S02D LQG15HS3N9S02D LQG15HS47NJ02D
LQG15HS4N7S02D LQG15HS56NJ02D LQG15HS5N6S02D LQG15HS68NJ02D LQG15HS6N2S02D
LQG15HS6N8J02D LQG15HS82NJ02D LQG15HS8N2J02D LQG15HSR10J02D LQG15HSR12J02D
LQG15HSR15J02D LQG15HSR18J02D LQG15HSR22J02D LQG15HSR27J02D LQG18HN10NJ00D
LQG18HN12NJ00D LQG18HN15NJ00D LQG18HN18NJ00D LQG18HN1N2S00D LQG18HN1N5S00D
