Rev.06.26.07
SMT15E_05
3 of 4
Embedded Power for
Business-Critical Continuity
All specifications are typical at nominal input, full load at 25°C unless otherwise stated.
Specifications
Notes
1 When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc. When Vin < 4.5 V, then
Vout can be adjusted from 0.8 Vdc to 2.75 Vdc.
2 The SMT15E features a ‘Negative Logic’ Remote ON/OFF operation. If
not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote
ON/OFF pin is referenced to ground.
The following conditions apply for the SMT15E:
Configuration Converter Operation
NO si tinUtiucric nepo nip etomeR
NO si tinUwol dellup nip etomeR
Remote pin pulled high [Von/off >1.2 V] Unit is OFF
A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please place
the suffix ‘-R’ at the end of the model number, e.g. SMT15E-05S3V3-RJ.
3 Full derating curves available in both the Longform Datasheet and Application Note 136.
4 When the unit is trimmed down to 0.8 V, the efficiency is 82.5%
5 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please
contact your local sales representative for details.
6 NOTICE: Some models do not support all options. Please contact your local Artesyn representative
or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
OUTPUTINPUTOUTPUTOUTPUTOUTPUTEFFICIENCY REGULATION MODEL
POWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) LINE LOAD NUMBER (5,6)
).XAM().NIM().XAM(
41.25 W 3.0-5.5 Vdc 2.5 Vdc 0 A 15 A 93.5% ±0.2% ±1.0% SMT15E-05S2V5J (EOL)
54.45 W 4.5-5.5 Vdc 3.3 Vdc 0 A 15 A 95% ±0.2% ±1.0% SMT15E-05S3V3J (EOL)
54.45 W 3.0-5.5 Vdc 0.8-3.63 Vdc 0 A 15 A 95% (4) ±0.2% ±1.0% SMT15E-05W3V3J
SMT15E - 05W3V3- T J
Part Number System with Options
Product Family
SMT = Surface Mount
Rated Output Current
15 = 15 Amps
Type of Output
S = Single
W = Wide
Output Voltage
0.8 Vdc to 3.63 Vdc
Performance
E = Enhanced Performace
Input Voltage
05 = 3.0 Vdc to 5.5 Vdc
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT15E-05W3V3J. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT15E-05W3V3J converter
leaves the factory the output has been adjusted to the default voltage of 3.3 V.
• When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc
• When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc
Output Voltage Adjustment of the SMT15E-05W3V3J Series
Packaging Options ) 5(
No ‘-T’ Suffix = Pb-free RoHS 6/6 compliant
parts in trays e.g SMT15E-05W3V3J
-TJ = Pb-free RoHS 6/6 compliant part in Tape
and Reel e.g SMT15E-05W3V3-TJ