Solid State Relay G3R-I/O Compact SSRs for I/O Interface with High Dielectric Strength Requirements * High-speed models with optimum input ratings for a variety of sensors are available. * Input Modules and Output Modules that have the same form-factor as the G2R. * Using a coupler approved by VDE 0884 and assuring an I/O dielectric strength of 4 kV. * Incorporating an easy-to-see monitoring indicator. * Approved by UL, CSA, and TUV. ("-UTU" models) Ordering Information To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5) Input Module Isolation Indicator Response speed Logic level Supply voltage Photocoupler Yes -- 4 to 32 VDC Supply current 0.1 to 100 mA Rated input voltage Model 100 to 240 VAC G3R-IAZR1SN High-speed (1 kHz) 5 VDC G3R-IDZR1SN Low-speed (10 Hz) 5 VDC 12 to 24 VDC G3R-IDZR1SN-1 12 to 24 VDC Output Module Isolation Phototriac Indicator Yes Zero cross function Yes Rated output load 2 A at 100 to 240 VAC Rated input voltage 5 to 24 VDC G3R-OA202SZN No Photocoupler Model G3R-OA202SLN -- 2 A at 5 to 48 VDC G3R-ODX02SN 1.5 A at 48 to 200 VDC G3R-OD201SN Note: When ordering a UL, CSA and EN (TUV) approved model, add "-UTU" to the model number as shown below: Example: G3R-OA202SZN-UTU DC5-24. I/O Indication I/O module classification and AC/DC use are indicated on the mark affixed to the top of the product. Mark indication AC IN Mark attached to the top of the product Specification Input module, AC input DC IN Input module, DC input AC OUT Output module, AC output DC OUT Output module, DC output Solid State Relay G3R-I/O 431 Specifications Ratings (at an Ambient Temperature of 25C) Input Module Input Model Rated voltage Operating voltage Input current Must operate voltage Must release voltage G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min. G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min. G3R-IDZR1SN-1 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. Output Model Logic level supply voltage G3R-IAZR1SN Logic level supply current 4 to 32 VDC 0.1 to 100 mA G3R-IDZR1SN G3R-IDZR1SN-1 Output Module Input Model G3R-OA202SZN Rated voltage 5 to 24 VDC Operating voltage 4 to 32 VDC Input current G3R-OA202SLN 15 mA max. (at 25C) G3R-ODX02SN 8 mA max. Must operate voltage 4 VDC max. Must release voltage 1 VDC min. G3R-OD201SN Output Model G3R-OA202SZN Rated load voltage 100 to 240 VAC Load voltage range 75 to 264 VAC Load current (see note) 0.05 to 2 A Inrush current 30 A (60 Hz, 1 cycle) G3R-OA202SLN G3R-ODX02SN 5 to 48 VDC 4 to 60 VDC 0.01 to 2 A 8 A (10 ms) G3R-OD201SN 48 to 200 VDC 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms) Note: The minimum current value is measured at 10C min. 432 Solid State Relay G3R-I/O Characteristics Input Module Operate time Item G3R-IAZR1SN 20 ms max. G3R-IDZR1SN 0.1 ms max. Release time Response frequency Output ON voltage drop Leakage current Insulation resistance Dielectric strength 20 ms max. 0.1 ms max. 10 Hz 1 kHz 1.6 V max. 5 A max. 100 M min. between input and output 4,000 VAC, 50/60 Hz for 1 min. between input and output Vibration resistance Shock resistance 10 to 55 Hz, 1.5-mm double amplitude G3R-IDZR1SN-1 15 ms max. 15 ms max. 10 Hz 1,000 m/s2 {approx. 100G} Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) UL File No. E64562 CSA File No. LR35535 TUV File No. R9650094 (EN60950) Operating: 45% to 85% Approx. 18 g Ambient temperature Approved standards Ambient humidity Weight Output Module Item Operate time Release time Response frequency G3R-OA202SZN G3R-OA202SLN 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. 20 Hz Output ON voltage drop Leakage current Insulation resistance Dielectric strength Vibration resistance 1.6 V max. 1.5 mA max. 1 mA max. 100 M min. between input and output 4,000 VAC, 50/60 Hz for 1 min. between input and output 10 to 55 Hz, 1.5-mm double amplitude Shock resistance 1,000 m/s2 {approx. 100G} Ambient temperature Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) UL File No. E64562 CSA File No. LR35535 TUV File No. R9650094 (EN60950) Operating: 45% to 85% Approx. 18 g Approved standards Ambient humidity Weight G3R-ODX02SN 1 ms max. 2 ms max. 100 Hz Solid State Relay G3R-OA201SN 2.5 V max. G3R-I/O 433 Engineering Data Load Current vs. Ambient Temperature 4-point mounting (see note 1) 16-point mounting (see note 2) 1.5 1.4 Single-point mounting 1 0.7 0.5 2 16-point mounting (see note 2) 1.5 1.4 Single-point mounting 1 0 20 30 40 55 60 80 -30 -20 100 4-point mounting (see note 1) 1.5 1.1 1 Single-point mounting 16-point mounting (see note 2) 0.6 0.5 0.5 -30 -20 G3R-OD201SN(-UTU) (40 to 200 VAC) 4-point mounting (see note 1) 2 Load current (A) 2 Load current (A) G3R-ODX02SN(-UTU) (4 to 60 VDC) Load current (A) G3R-OA202SZN(-UTU)/OA202SLN(-UTU) Ambient temperature (C) 0 20 40 55 60 80 100 -30 -20 Ambient temperature (C) 0 20 40 55 60 80 100 Ambient temperature (C) Note: 1. When G730-Z0M04-B is mounted. 2. When G70A-Z0C16 is mounted. Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3R-OA202SZN(-UTU)/OA202SLN(-UTU) G3R-ODX02SN(-UTU) 20 10 10 30 50 100 200 500 1000 5000 10 9 9 8 8 7 6 5 4 3 Solid State Relay 7 6 5 4 3 2 2 1 1 0 Energized time (ms) 434 Inrush current (A) Inrush current (A) Inrush current (A) 30 G3R-OD201SN(-UTU) 10 10 30 50 100 300 500 Energized time (ms) G3R-I/O 1000 2000 0 10 30 50 100 300 500 Energized time (ms) 1000 2000 Dimensions Unit: mm (inch) G3R 1 Terminal Arrangement/ Internal Connections (Bottom View) 5.2 3 0.5 29 max. (+) 4 9.6 1 28 max. 13 max. (-) 17.4 4.75 5 4.7 0.5 4.75 4 4 Load 5 7.5 3 Input 1 5 (-) (+) 10 2 20 Connecting Sockets P2RF-05 Five, M3.5x8 G3R I/O Relay 4 dia. 4.2-dia. hole 12 71.5 max. P2RF-05 Socket 58.5 * M3 (M3 x16) or 3.2-dia. hole 19.5 max. 30 max. 54 max. * Indicates a value when using the PFP-@N Supporting Rail. The value is 67.5 when using the PFP-@N2. P2RF-05-E G3R I/O Relay 59 max. 48 max. M3.5 screw PFRF-05-E Socket 3.2-dia. hole 3.5-dia. hole 62.5 ** (66.5)*** 85.5 max. M3 or 3.5-dia. hole 61 max. P2R-05A ** Indicates a value when using the PFP-@N Supporting Rail with the P2RF-05-E The value is 71.5 when using the PFP-@N2. *** Indicates a value when using the PFP-@N Supporting Rail with the P2RF-08-E The value is 75.5 when using the PFP-@N2. 14.5 max. G3R I/O Relay 35.5 max. P2R-05A Socket Five, 3x1.5-dia. hole 36 max. (Panel thickness must be 1.6 to 2.0 mm.) (For use when mounting in a panel or in the P2R-P mounting plate ) Solid State Relay G3R-I/O 435 14.5 max. P2R-05P Five, 1.6-dia. hole G3R I/O Relay 35.5 max. P2R-05P Socket 36 max. Dimensional tolerance is 0.1. 14 max. Five, 1.6-dia. hole P2R-057P G3R I/O Relay 32 max. P2R-057P Socket 41 max. Socket Mounting Plate Use the P2R-P Socket Mounting Plate when arranging several P2R-05A Sockets in a row. P2R-P R2.25 10 ellipses Square hole Approvals UL Recognized (File No. E64562) / CSA Certified (File No. LR35535) Model G3RIAZR1SN Module type Input Rating 100 to 240 VAC IDZR1SN Input 5 VDC, 12 to 24 VDC IDZR1SN-1 Input 5 VDC, 12 to 24 VDC OA202SZN Output 5 to 24 VDC OA202SLN Output 5 to 24 VDC ODX02SN Output 5 to 24 VDC OD201SN Output 5 to 24 VDC Model G3RIAZR1SN Module type Input Output rating 32 VDC, 100 mA (General Purpose) IDZR1SN Input 32 VDC, 100 mA (General Purpose) IDZR1SN-1 Input 32 VDC, 100 mA (General Purpose) OA202SZN Output 264 VAC, 2 A (General Purpose) 264 VAC, 1 A (Tungsten) 264 VAC, 1 A FLA, 6 A LRA OA202SLN Output 264 VAC, 2 A (General Purpose) 264 VAC, 1 A (Tungsten) 264 VAC, 1 A FLA, 6 A LRA ODX02SN Output 60 VDC, 2 A (General Purpose) OD201SN Output 200 VDC, 1.5 A (General Purpose) 60 VDC, 1 A (Tungsten) 200 VDC, 0.75 A (Tungsten) 436 Solid State Relay G3R-I/O Precautions Connection Protective element With the SSR for DC switching, the load can be connected to either positive or negative output terminal of the SSR. Since the SSR does not incorporate an overvoltage absorption component, be sure to connect an overvoltage absorption component when using the SSR under an inductive load. Precaution of Mounting Output Modules With up to four G3R SSRs mounted closely and side by side, 2-A loads can be switched. G3R G3R With a G3R SSRs mounted every other slot, 2-A loads can be switched. G3R Solid State Relay G3R-I/O 437 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. X301-E-1b Solid State Relay 09/11 G3R-I/O Specifications subject to change without notice Printed in USA Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: G3R-OA202SZN DC5-24 G3R-IAZR1SN AC100-240 G3R-ODX02SN-DC5-24 G3R-IDZR1SN DC5