R75MI3150AAM-K - KEMET Electronics Corporation

10/2006

133

R75

MKP Series

REDUCED SIZES

METALLIZED POLYPROPYLENE FILM CAPACITOR

D.C. AND PULSE APPLICATIONS

Typical applications: deﬂ ection circuits in TV-sets and

monitors (S-correction), resonant capacitor in electronic

ballast and compact lamp, coupling capacitor in SMPS,

timing and oscillator circuits.

PRODUCT CODE: R75 (Digit 12: A to Z)

GENERAL TECHNICAL DATA

Dielectric: polypropylene ﬁ lm.

Plates: metal layer deposited by evaporation under

vacuum.

Winding: non-inductive type.

Leads: tinned wire.

Protection: plastic case, thermosetting resin ﬁ lled.

Box material is solvent resistant and ﬂ ame

retardant according to UL94 V0.

Marking: manufacturer’s logo, series (R75), dielectric

code (MKP), capacitance, tolerance, D.C. rated

voltage, manufacturing date code.

Climatic category: 55/105/56 IEC 60068-1

Operating temperature range: -55 to +105°C

Related documents: IEC 60384-16

Ød±0.05 p≤15* 22.5≤p≤27.5 p = 37.5

0.6 0.8 1.0

*Except for box ≥10x16x18 having Ød = 0.8±0.05mm

All dimensions are in mm.

PRODUCT CODE SYSTEM

The part number, comprising 14 digits, is formed as follows:

123 4 5 67891011121314

R75 -

Digit 1 to 3 Series code.

Digit 4 d.c. rated voltage:

G = 160V I = 250V

M = 400V P = 630V

Q = 1000V

Digit 5 Pitch:

D = 7.5 mm; F = 10.0mm; I = 15.0mm;

N = 22.5 mm; R = 27.5mm; W = 37.5mm

Digit 6 to 9 Digits 7 - 8 - 9 indicate the ﬁ rst three digits of

Capacitance value and the 6th digit indicates

the number of zeros that must be added to

obtain the Rated Capacitance in pF.

Digit 10 to 11 Mechanical version and/or packaging (table 1)

Digit 12 Identiﬁ es the dimensions and electrical

characteristics (A to Z).

Digit 13 Internal use.

Digit 14 Capacitance tolerance:

J=5%; K=10%; M=20%

Table 1 (for more detailed information, please refer to pages 14).

Standard

packaging style

Lead length Taping style Ordering code

(mm)

Fig.

(No.)

Pitch

(mm) (Digit 10 to 11)

AMMO-PACK 06.35 1 7.5 DQ

AMMO-PACK 12.70 2 10.0/15.0 DQ

AMMO-PACK 19.05 3 22.5 DQ

REEL Ø 355mm 06.35 1 7.5 CK

REEL Ø 355mm 12.70 2 10.0/15.0 GY

REEL Ø 500mm 12.70 2 10.0/15.0 CK

REEL Ø 500mm 19.05 3 22.5/27.5 CK

Loose, short leads 04+2 AA

Loose, long leads

(p≤10mm) 17+1/-2 Z3

Loose, long leads

(p≥15mm)

30+5

25+2/-1

Note: Ammo-pack is the preferred packaging for taped version.

Loose

Taped

Fig. 1 Fig. 2 Fig. 3

Pitch Box thickness (B) Maximum dimensions (mm)

(mm) (mm) B max H max L max

7.5 All B +0.1 H +0.1 L +0.2

10.0 All B +0.2 H +0.1 L +0.2

15.0 <7.5 B +0.2 H +0.1 L +0.3

15.0 ≥7.5 B +0.2 H +0.1 L +0.5

22.5 All B +0.2 H +0.1 L +0.3

27.5 All B +0.2 H +0.1 L +0.3

37.5 All B +0.3 H +0.1 L +0.3

10/2006 134

R75

MKP Series

REDUCED SIZES

METALLIZED POLYPROPYLENE FILM CAPACITOR

D.C. AND PULSE APPLICATIONS

PRODUCT CODE: R75 (Digit 12: A to Z)

Rated

Cap.

250Vdc / 140Vac

Std dimensions

Max

dv/dt Max K0Part Number

BHL p(V/µs) (V2/µs)

0.068 µF 4.0 9.0 10.0 7.5 180 90 E3 R75ID 2680--B--

0.082 µF 4.0 9.0 10.0 7.5 180 90 E3 R75ID 2820--B--

0.10 µF 5.0 10.5 10.0 7.5 180 90 E3 R75ID 3100--B--

0.12 µF 5.0 10.5 10.0 7.5 180 90 E3 R75ID 3120--B--

0.15 µF 6.0 12.0 10.5 7.5 180 90 E3 R75ID 3150--A--

0.18 µF 6.0 12.0 10.5 7.5 180 90 E3 R75ID 3180--A--

0.082 µF 4.0 9.0 13.0 10.0 150 75 E3 R75IF 2820--A--

0.10 µF 4.0 9.0 13.0 10.0 150 75 E3 R75IF 3100--A--

0.12 µF 5.0 11.0 13.0 10.0 150 75 E3 R75IF 3120--A--

0.15 µF 5.0 11.0 13.0 10.0 150 75 E3 R75IF 3150--A--

0.18 µF 6.0 12.0 13.0 10.0 150 75 E3 R75IF 3180--A--

0.22 µF 6.0 12.0 13.0 10.0 150 75 E3 R75IF 3220--A--

1 section

(160Vdc - 250Vdc)

single sided metallized

polypropylene ﬁ lm

Rated

Cap.

160Vdc / 70Vac

Std dimensions

Max

dv/dt Max K0Part Number

BHL p(V/µs) (V2/µs)

0.10 µF 4.0 9.0 10.0 7.5 100 32 E3 R75GD 3100--B--

0.12 µF 5.0 10.5 10.0 7.5 100 32 E3 R75GD 3120--B--

0.15 µF 5.0 10.5 10.0 7.5 100 32 E3 R75GD 3150--B--

0.18 µF 6.0 12.0 10.5 7.5 100 32 E3 R75GD 3180--A--

0.22 µF 6.0 12.0 10.5 7.5 100 32 E3 R75GD 3220--A--

0.12 µF 4.0 9.0 13.0 10.0 90 28 E3 R75GF 3120--A--

0.15 µF 4.0 9.0 13.0 10.0 90 28 E3 R75GF 3150--A--

0.18 µF 5.0 11.0 13.0 10.0 90 28 E3 R75GF 3180--A--

0.22 µF 5.0 11.0 13.0 10.0 90 28 E3 R75GF 3220--A--

0.27 µF 6.0 12.0 13.0 10.0 90 28 E3 R75GF 3270--A--

0.33 µF 6.0 12.0 13.0 10.0 90 28 E3 R75GF 3330--A--

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

All dimensions are mm.

Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the

maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.

The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in

the above table. The dv/dt test is carried out at 2 times the above values.

10/2006

135

R75

MKP Series

REDUCED SIZES

METALLIZED POLYPROPYLENE FILM CAPACITOR

D.C. AND PULSE APPLICATIONS

PRODUCT CODE: R75 (Digit 12: A to Z)

1 section

(400Vdc)

single sided metallized

polypropylene ﬁ lm

Rated

Cap.

400Vdc / 200Vac

Std dimensions

Max

dv/dt

Max

Part Number

B H L p (V/µs) (V2/µs)

0.27 µF 6.0 15.0 26.5 22.5 180 160 E3 R75MN 3270--M--

0.33 µF 6.0 15.0 26.5 22.5 180 160 E3 R75MN 3330--M--

0.39 µF 6.0 15.0 26.5 22.5 180 160 E3 R75MN 3390--M--

0.47 µF 6.0 15.0 26.5 22.5 180 160 E3 R75MN 3470--M--

0.56 µF 7.0 16.0 26.5 22.5 180 160 E3 R75MN 3560--M--

0.68 µF 7.0 16.0 26.5 22.5 180 160 E3 R75MN 3680--M--

0.82 µF 8.5 17.0 26.5 22.5 180 160 E3 R75MN 3820--M--

1.0 µF 10.0 18.5 26.5 22.5 180 160 E3 R75MN 4100--M--

1.2 µF 10.0 18.5 26.5 22.5 180 160 E3 R75MN 4120--M--

1.5 µF 11.0 20.0 26.5 22.5 180 160 E3 R75MN 4150--M--

1.8 µF 13.0 22.0 26.5 22.5 180 160 E3 R75MN 4180--M--

0.68 µF 9.0 17.0 32.0 27.5 100 80 E3 R75MR 3680--M--

0.82 µF 9.0 17.0 32.0 27.5 100 80 E3 R75MR 3820--M--

1.0 µF 9.0 17.0 32.0 27.5 100 80 E3 R75MR 4100--M--

1.2 µF 9.0 17.0 32.0 27.5 100 80 E3 R75MR 4120--M--

1.5 µF 11.0 20.0 32.0 27.5 100 80 E3 R75MR 4150--M--

1.8 µF 11.0 20.0 32.0 27.5 100 80 E3 R75MR 4180--M--

2.2 µF 13.0 22.0 32.0 27.5 100 80 E3 R75MR 4220--M--

2.7 µF 13.0 22.0 32.0 27.5 100 80 E3 R75MR 4270--M--

3.3 µF 14.0 28.0 32.0 27.5 80 60 E3 R75MR 4330--M--

3.9 µF 14.0 28.0 32.0 27.5 80 60 E3 R75MR 4390--M--

4.7 µF 18.0 33.0 32.0 27.5 80 60 E3 R75MR 4470--M--

2.2 µF 11.0 22.0 41.5 37.5 70 60 E3 R75MW4220--M--

2.7 µF 11.0 22.0 41.5 37.5 70 60 E3 R75MW4270--M--

3.3 µF 11.0 22.0 41.5 37.5 70 60 E3 R75MW4330--M--

3.9 µF 13.0 24.0 41.5 37.5 70 60 E3 R75MW4390--M--

4.7 µF 16.0 28.5 41.5 37.5 70 60 E3 R75MW4470--M--

5.6 µF 16.0 28.5 41.5 37.5 40 30 E3 R75MW4560--M--

6.8 µF 16.0 28.5 41.5 37.5 40 30 E3 R75MW4680--M--

8.2 µF 19.0 32.0 41.5 37.5 40 30 E3 R75MW4820--M--

10.0 µF 20.0 40.0 41.5 37.5 40 30 E3 R75MW5100--M--

12.0 µF 20.0 40.0 41.5 37.5 40 30 E3 R75MW5120--M--

15.0 µF 24.0 44.5 41.5 37.5 20 15 E3 R75MW5150--M--

18.0 µF 24.0 44.5 41.5 37.5 20 15 E3 R75MW5180--M--

22.0 µF 30.0 45.0 41.5 37.5 20 15 E3 R75MW5220--M--

Rated

Cap.

400Vdc / 200Vac

Std dimensions

Max

dv/dt Max K0Part Number

B H L p (V/µs) (V2/µs)

0.027 µF 4.0 9.0 10.0 7.5 390 312 E3 R75MD 2270--B--

0.033 µF 5.0 10.5 10.0 7.5 390 312 E3 R75MD 2330--B--

0.039 µF 5.0 10.5 10.0 7.5 390 312 E3 R75MD 2390--B--

0.047 µF 5.0 10.5 10.0 7.5 390 312 E3 R75MD 2470--B--

0.056 µF 6.0 12.0 10.5 7.5 390 312 E3 R75MD 2560--A--

0.068 µF 6.0 12.0 10.5 7.5 390 312 E3 R75MD 2680--A--

0.022 µF 4.0 9.0 13.0 10.0 350 280 E3 R75MF 2220--M--

0.027 µF 4.0 9.0 13.0 10.0 350 280 E3 R75MF2270--M--

0.033 µF 4.0 9.0 13.0 10.0 350 280 E3 R75MF 2330--M--

0.039 µF 4.0 9.0 13.0 10.0 350 280 E3 R75MF 2390--M--

0.047 µF 5.0 11.0 13.0 10.0 350 280 E3 R75MF 2470--M--

0.056 µF 5.0 11.0 13.0 10.0 350 280 E3 R75MF 2560--M--

0.068 µF 5.0 11.0 13.0 10.0 350 280 E3 R75MF 2680--M--

0.082 µF 6.0 12.0 13.0 10.0 350 280 E3 R75MF 2820--M--

0.10 µF 6.0 12.0 13.0 10.0 350 280 E3 R75MF 3100--M--

0.10 µF 5.0 11.0 18.0 15.0 300 240 E3 R75MI 3100--M--

0.12 µF 5.0 11.0 18.0 15.0 300 240 E3 R75MI 3120--M--

0.15 µF 5.0 11.0 18.0 15.0 300 240 E3 R75MI 3150--M--

0.18 µF 6.0 12.0 18.0 15.0 300 240 E3 R75MI 3180--M--

0.22 µF 6.0 12.0 18.0 15.0 300 240 E3 R75MI 3220--M--

0.27 µF 7.5 13.5 18.0 15.0 300 240 E3 R75MI 3270--M--

0.33 µF 7.5 13.5 18.0 15.0 300 240 E3 R75MI 3330--M--

0.33 µF 9.0 12.5 18.0 15.0 300 240 E3 R75MI 3330--N--

0.39 µF 8.5 14.5 18.0 15.0 300 240 E3 R75MI 3390--M--

0.47 µF 8.5 14.5 18.0 15.0 300 240 E3 R75MI 3470--M--

0.47 µF 13.0 12.0 18.0 15.0 300 240 E3 R75MI 3470--N--

0.56 µF 10.0 16.0 18.0 15.0 300 240 E3 R75MI 3560--M--

0.68 µF 10.0 16.0 18.0 15.0 300 240 E3 R75MI 3680--M--

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

All dimensions are mm.

Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the

maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.

The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in

the above table. The dv/dt test is carried out at 2 times the above values.

10/2006 136

R75

MKP Series

REDUCED SIZES

METALLIZED POLYPROPYLENE FILM CAPACITOR

D.C. AND PULSE APPLICATIONS

PRODUCT CODE: R75 (Digit 12: A to Z)

1 section

(630Vdc)

single sided metallized

polypropylene ﬁ lm

Rated

Cap.

630Vdc / 220Vac*

Std dimensions

Max

dv/dt Max K0Part Number

B H L p (V/µs) (V2/µs)

0.47 µF 9.0 17.0 32.0 27.5 150 189 E3 R75PR3470--M--

0.56 µF 9.0 17.0 32.0 27.5 150 189 E3 R75PR3560--M--

0.68 µF 9.0 17.0 32.0 27.5 150 189 E3 R75PR3680--M--

0.82 µF 9.0 17.0 32.0 27.5 150 189 E3 R75PR3820--N--

0.82 µF 11.0 20.0 32.0 27.5 150 189 E3 R75PR3820--M--

1.0 µF 9.0 17.0 32.0 27.5 150 189 E3 R75PR4100--N--

1.0 µF 11.0 20.0 32.0 27.5 150 189 E3 R75PR4100--M--

1.2 µF 9.0 17.0 32.0 27.5 150 189 E3 R75PR4120--N--

1.2 µF 13.0 22.0 32.0 27.5 150 189 E3 R75PR4120--M--

1.5 µF 11.0 20.0 32.0 27.5 150 189 E3 R75PR4150--N--

1.5 µF 13.0 22.0 32.0 27.5 150 189 E3 R75PR4150--M--

1.8 µF 11.0 20.0 32.0 27.5. 150 189 E3 R75PR4180--N--

1.8 µF 14.0 28.0 32.0 27.5 150 189 E3 R75PR4180--M--

2.2 µF 13.0 25.0 32.0 27.5 150 189 E3 R75PR4220--N--

2.2 µF 14.0 28.0 32.0 27.5 150 189 E3 R75PR4220--M--

2.7 µF 13.0 25.0 32.0 27.5 150 189 E3 R75PR4270--N--

2.7 µF 18.0 33.0 32.0 27.5 150 189 E3 R75PR4270--M--

3.3 µF 14.0 28.0 32.0 27.5 150 189 E3 R75PR4330--N--

3.3 µF 18.0 33.0 32.0 27.5 150 189 E3 R75PR4330--M--

3.9 µF 14.0 28.0 32.0 27.5 100 126 E3 R75PR4390--N--

3.9 µF 22.0 37.0 32.0 27.5 100 126 E3 R75PR4390--M--

4.7 µF 18.0 33.0 32.0 27.5 100 126 E3 R75PR4470--N--

4.7 µF 22.0 37.0 32.0 27.5 100 126 E3 R75PR4470--M--

5.6 µF 18.0 33.0 32.0 27.5 100 126 E3 R75PR4560--N--

6.8 µF 22.0 37.0 32.0 27.5 100 126 E3 R75PR4680--N--

8.2 µF 22.0 37.0 32.0 27.5 100 126 E3 R75PR4820--N--

1.5 µF 11.0 22.0 41.5 37.5 100 126 E3 R75PW4150--M--

1.8 µF 11.0 22.0 41.5 37.5 100 126 E3 R75PW4180--M--

2.2 µF 11.0 22.0 41.5 37.5 100 126 E3 R75PW4220--N--

2.2 µF 13.0 24.0 41.5 37.5 100 126 E3 R75PW4220--M--

2.7 µF 11.0 22.0 41.5 37.5 100 126 E3 R75PW4270--N--

2.7 µF 13.0 24.0 41.5 37.5 100 126 E3 R75PW4270--M--

3.3 µF 13.0 24.0 41.5 37.5 100 126 E3 R75PW4330--N--

3.3 µF 16.0 28.5 41.5 37.5 100 126 E3 R75PW4330--M--

3.9 µF 13.0 24.0 41.5 37.5 100 126 E3 R75PW4390--N--

3.9 µF 16.0 28.5 41.5 37.5 100 126 E3 R75PW4390--M--

4.7 µF 16.0 28.5 41.5 37.5 60 75.6 E3 R75PW4470--N--

4.7 µF 19.0 32.0 41.5 37.5 60 75.6 E3 R75PW4470--M--

5.6 µF 16.0 28.5 41.5 37.5 60 75.6 E3 R75PW4560--N--

5.6 µF 19.0 32.0 41.5 37.5 60 75.6 E3 R75PW4560--M--

6.8 µF 19.0 32.0 41.5 37.5 60 75.6 E3 R75PW4680--N--

6.8 µF 20.0 40.0 41.5 37.5 60 75.6 E3 R75PW4680--M--

8.2 µF 19.0 32.0 41.5 37.5 60 75.6 E3 R75PW4820--N--

8.2 µF 20.0 40.0 41.5 37.5 60 75.6 E3 R75PW4820--M--

10.0 µF 20.0 40.0 41.5 37.5 60 75.6 E3 R75PW5100--N--

10.0 µF 24.0 44.0 41.5 37.5 60 75.6 E3 R75PW5100--M--

12.0 µF 24.0 44.0 41.5 37.5 30 37.8 E3 R75PW5120--M--

15.0 µF 24.0 44.0 41.5 37.5 30 37.8 E3 R75PW5150--N--

15.0 µF 30.0 45.0 41.5 37.5 30 37.8 E3 R75PW5150--M--

18.0 µF 30.0 45.0 41.5 37.5 30 37.8 E3 R75PW5180--N--

22.0 µF 30.0 45.0 41.5 37.5 30 37.8 E3 R75PW5220--N--

Rated

Cap.

630Vdc / 220Vac*

Std dimensions

Max

dv/dt

Max

Part Number

B H L p (V/µs) (V2/µs)

0.010 µF 4.0 9.0 10.0 7.5 600 760 E3 R75PD2100--B--

0.012 µF 4.0 9.0 10.0 7.5 600 760 E3 R75PD2120--B--

0.015 µF 5.0 10.5 10.0 7.5 600 760 E3 R75PD2150--B--

0.018 µF 5.0 10.5 10.0 7.5 600 760 E3 R75PD2180--B--

0.022 µF 6.0 12.0 10.5 7.5 600 760 E3 R75PD2220--A--

0.027 µF 6.0 12.0 10.5 7.5 600 760 E3 R75PD2270--A--

0.010 µF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 2100--M--

0.012 µF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 2120--M--

0.015 µF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 2150--M--

0.018 µF 4.0 9.0 13.0 10.0 550 690 E3 R75PF 2180--M--

0.022 µF 5.0 11.0 13.0 10.0 550 690 E3 R75PF 2220--M--

0.027 µF 5.0 11.0 13.0 10.0 550 690 E3 R75PF 2270--M--

0.033 µF 5.0 11.0 13.0 10.0 550 690 E3 R75PF 2330--M--

0.039 µF 6.0 12.0 13.0 10.0 550 690 E3 R75PF 2390--M--

0.047 µF 6.0 12.0 13.0 10.0 550 690 E3 R75PF 2470--M--

0.056 µF 6.0 12.0 13.0 10.0 550 690 E3 R75PF 2560--M--

0.068 µF 6.0 12.0 13.0 10.0 550 690 E3 R75PF 2680--M--

0.010 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2100--M--

0.012 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2120--M--

0.015 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2150--M--

0.018 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2180--M--

0.022 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2220--M--

0.027 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2270--M--

0.033 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2330--M--

0.039 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2390--M--

0.047 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2470--M--

0.056 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2560--M--

0.068 µF 5.0 11.0 18.0 15.0 400 504 E3 R75PI 2680--M--

0.082 µF 6.0 12.0 18.0 15.0 400 504 E3 R75PI 2820--M--

0.10 µF 6.0 12.0 18.0 15.0 400 504 E3 R75PI 3100--M--

0.12 µF 7.5 13.5 18.0 15.0 400 504 E3 R75PI 3120--M--

0.15 µF 7.5 13.5 18.0 15.0 400 504 E3 R75PI 3150--M--

0.18 µF 8.5 14.5 18.0 15.0 400 504 E3 R75PI 3180--M--

0.22 µF 8.5 14.5 18.0 15.0 400 504 E3 R75PI 3220--M--

0.22 µF 9.0 12.5 18.0 15.0 400 504 E3 R75PI 3220--N--

0.27 µF 10.0 16.0 18.0 15.0 400 504 E3 R75PI 3270--M--

0.33 µF 10.0 16.0 18.0 15.0 400 504 E3 R75PI 3330--M--

0.33 µF 13.0 12.0 18.0 15.0 400 504 E3 R75PI 3330--N--

0.39 µF 11.0 19.0 18.0 15.0 400 504 E3 R75PI 3390--M--

0.47 µF 11.0 19.0 18.0 15.0 400 504 E3 R75PI 3470--M--

0.15 µF 6.0 15.0 26.5 22.5 250 315 E3 R75PN3150--M--

0.18 µF 6.0 15.0 26.5 22.5 250 315 E3 R75PN3180--M--

0.22 µF 6.0 15.0 26.5 22.5 250 315 E3 R75PN3220--M--

0.27 µF 7.0 16.0 26.5 22.5 250 315 E3 R75PN3270--M--

0.33 µF 7.0 16.0 26.5 22.5 250 315 E3 R75PN3330--M--

0.39 µF 10.0 18.5 26.5 22.5 250 315 E3 R75PN3390--M--

0.47 µF 10.0 18.5 26.5 22.5 250 315 E3 R75PN3470--M--

0.56 µF 10.0 18.5 26.5 22.5 250 315 E3 R75PN3560--M--

0.68 µF 11.0 20.0 26.5 22.5 250 315 E3 R75PN3680--M--

0.82 µF 13.0 22.0 26.5 22.5 250 315 E3 R75PN3820--M--

1.0 µF 13.0 22.0 26.5 22.5 250 315 E3 R75PN4100--M--

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

All dimensions are mm.

Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the

maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.

The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in

the above table. The dv/dt test is carried out at 2 times the above values.

* Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 183)

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

10/2006

137

R75

MKP Series

REDUCED SIZES

METALLIZED POLYPROPYLENE FILM CAPACITOR

D.C. AND PULSE APPLICATIONS

PRODUCT CODE: R75 (Digit 12: A to Z)

1 section

(1000Vdc)

single sided metallized

polypropylene ﬁ lm

Rated

Cap.

1000Vdc / 250Vac*

Std dimensions

Max

dv/dt

Max

Part Number

B H L p (V/µs) (V2/µs)

0.68 µF 11.0 22.0 41.5 37.5 150 300 E3 R75QW3680--M--

0.82 µF 13.0 24.0 41.5 37.5 150 300 E3 R75QW3820--M--

1.0 µF 11.0 22.0 41.5 37.5 150 300 E3 R75QW4100--N--

1.0 µF 13.0 24.0 41.5 37.5 150 300 E3 R75QW4100--M--

1.2 µF 11.0 22.0 41.5 37.5 150 300 E3 R75QW4120--N--

1.2 µF 16.0 28.5 41.5 37.5 150 300 E3 R75QW4120--M--

1.5 µF 11.0 22.0 41.5 37.5 150 300 E3 R75QW4150--N--

1.5 µF 16.0 28.5 41.5 37.5 150 300 E3 R75QW4150--M--

1.8 µF 13.0 24.0 41.5 37.5 150 300 E3 R75QW4180--N--

1.8 µF 19.0 32.0 41.5 37.5 150 300 E3 R75QW4180--M--

2.2 µF 16.0 28.5 41.5 37.5 120 240 E3 R75QW4220--N--

2.2 µF 19.0 32.0 41.5 37.5 120 240 E3 R75QW4220--M--

2.7 µF 16.0 28.5 41.5 37.5 120 240 E3 R75QW4270--N--

2.7 µF 20.0 40.0 41.5 37.5 120 240 E3 R75QW4270--M--

3.3 µF 19.0 32.0 41.5 37.5 120 240 E3 R75QW4330--N--

3.3 µF 24.0 44.0 41.5 37.5 120 240 E3 R75QW4330--M--

3.9 µF 19.0 32.0 41.5 37.5 120 240 E3 R75QW4390--N--

3.9 µF 24.0 44.0 41.5 37.5 120 240 E3 R75QW4390--M--

4.7 µF 20.0 40.0 41.5 37.5 80 160 E3 R75QW4470--N--

4.7 µF 24.0 44.0 41.5 37.5 80 160 E3 R75QW4470--M--

5.6 µF 20.0 40.0 41.5 37.5 80 160 E3 R75QW4560--N--

5.6 µF 30.0 45.0 41.5 37.5 80 160 E3 R75QW4560--M--

6.8 µF 24.0 44.0 41.5 37.5 80 160 E3 R75QW4680--N--

8.2 µF 24.0 44.0 41.5 37.5 80 160 E3 R75QW4820--N--

10.0 µF 30.0 45.0 41.5 37.5 80 160 E3 R75QW5100--N--

Rated

Cap.

1000Vdc / 250Vac*

Std dimensions

Max

dv/dt

Max

Part Number

B H L p (V/µs) (V2/µs)

0.22 µF 9.0 17.0 32.0 27.5 180 360 E3 R75QR3220--M--

0.27 µF 9.0 17.0 32.0 27.5 180 360 E33 R75QR3270--M--

0.33 µF 9.0 17.0 32.0 27.5 180 360 E3 R75QR3330--N--

0.33 µF 11.0 20.0 32.0 27.5 180 360 E3 R75QR3330--M--

0.39 µF 9.0 17.0 32.0 27.5 180 360 E3 R75QR3390--N--

0.39 µF 11.0 20.0 32.0 27.5 180 360 E3 R75QR3390--M--

0.47 µF 9.0 17.0 32.0 27.5 180 360 E3 R75QR3470--N--

0.47 µF 13.0 22.0 32.0 27.5 180 360 E3 R75QR3470--M--

0.56 µF 9.0 17.0 32.0 27.5 180 360 E3 R75QR3560--N--

0.56 µF 13.0 22.0 32.0 27.5 180 360 E3 R75QR3560--M--

0.68 µF 11.0 20.0 32.0 27.5 180 360 E3 R75QR3680--N--

0.68 µF 14.0 28.0 32.0 27.5 180 360 E3 R75QR3680--M--

0.82 µF 11.0 20.0 32.0 27.5 180 360 E3 R75QR3820--N--

0.82 µF 14.0 28.0 32.0 27.5 180 360 E3 R75QR3820--M--

1.0 µF 13.0 22.0 32.0 27.5 180 360 E3 R75QR4100--N--

1.0 µF 18.0 33.0 32.0 27.5 180 360 E3 R75QR4100--M--

1.2 µF 13.0 25.0 32.0 27.5 180 360 E3 R75QR4120--N--

1.2 µF 18.0 33.0 32.0 27.5 180 360 E3 R75QR4120--M--

1.5 µF 14.0 28.0 32.0 27.5 180 360 E3 R75QR4150--N--

1.5 µF 18.0 33.0 32.0 27.5 180 360 E3 R75QR4150--M--

1.8 µF 14.0 28.0 32.0 27.5 180 360 E3 R75QR4180--N--

1.8 µF 22.0 37.0 32.0 27.5 180 360 E3 R75QR4180--M--

2.2 µF 18.0 33.0 32.0 27.5 180 360 E3 R75QR4220--N--

2.2 µF 22.0 37.0 32.0 27.5 180 360 E3 R75QR4220--M--

2.7 µF 18.0 33.0 32.0 27.5 180 360 E3 R75QR4270--N--

3.3 µF 22.0 37.0 32.0 27.5 180 360 E3 R75QR4330--N--

3.9 µF 22.0 37.0 32.0 27.5 180 360 E3 R75QR4390--N--

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

All dimensions are mm.

Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the

maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V.

The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in

the above table. The dv/dt test is carried out at 2 times the above values.

* Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 183)

Mechanical version and packaging (Table1)

Internal use

Tolerance: J (±5%); K (±10%); M (±20%)

10/2006 138

ELECTRICAL CHARACTERISTICS

Rated voltage (VR):

160Vdc - 250Vdc - 400Vdc - 630Vdc - 1000 Vdc.

Rated temperature (TR): +85°C

Temperature derated voltage:

The following decreasing factor has to be applied on the

rated voltage:

+85°C to +105°C: 2.00% per °C for VR (d.c.)

+85°C to +105°C: 1.25% per °C for VR (a.c.)

Capacitance range:

0.01µF to 22µF

Capacitance values:

E12 series (IEC 60063 Norm).

Capacitance tolerances (measured at 1 kHz):

±5% (J); ±10% (K); ±20% (M).

Total self-inductance (L): (Lead length ~2 mm)

Pitch (mm) 7.5 10 15 22.5 27.5 37.5

L (nH) ≈ 8 9 10 18 18 20

Dissipation factor (DF):

tgδx10-4 at +25°C ±5°C

kHz C≤0.1µF 0.1<C≤1.0µF 1<C≤22µF

100

≤04

≤06

≤30

≤05

≤12

≤6

Insulation resistance:

Test conditions

Temperature: +25°C±5°C

Voltage charge time: 1 min

Voltage charge: 100Vdc

Performance

≥1x105 MΩ for C≤0.33 µF (5x105 MΩ)*

≥30000 s for C>0.33 µF (150000 s)*

* Typical value.

Test voltage between terminations:

1.6xVR applied for 2 s at +25°C±5°C

R75

MKP Series

REDUCED SIZES

METALLIZED POLYPROPYLENE FILM CAPACITOR

D.C. AND PULSE APPLICATIONS

PRODUCT CODE: R75 (Digit 12: A to Z)

TEST METHOD AND PERFORMANCE

Damp heat, steady state:

Test conditions

Temperature: +40°C±2°C

Relative humidity (RH): 93% ±2%

Test duration: 56 days

Performance

Capacitance change |∆C/C|: ≤2%

DF change (∆tgδ): ≤10x10-4 at 1kHz

Insulation resistance: ≥50% of initial limit.

Endurance:

Test conditions

Temperature: +85°C±2°C

Test duration: 2000 h

Voltage applied: 1.25xVR

Performance

Capacitance change |∆C/C|: ≤3%

DF change (∆tgδ): ≤10x10-4 at 10kHz for C≤1µF

≤10x10-4 at 01kHz for C≥1µF

Insulation resistance: ≥50% of initial limit.

Resistance to soldering heat:

Test conditions

Solder bath temperature: +260°C±5°C

Dipping time (with heat screen):10 s±1 s

Performance

Capacitance change |∆C/C|: ≤1%

DF change (∆tgδ): ≤10x10-4 at 10kHz for C≤1µF

≤10x10-4 at 01kHz for Cu1µF

Insulation resistance: ≥initial limit.

Long term stability (after two years):

Storage: standard environmental conditions (see page 12)

Performance

Capacitance change |∆C/C|: ≤0.5%

10/2006

139

R75

MKP Series

REDUCED SIZES

METALLIZED POLYPROPYLENE FILM CAPACITOR

D.C. AND PULSE APPLICATIONS

PRODUCT CODE: R75 (Digit 12: A to Z)

MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)

Note: p (pitch) in mm.

10/2006 140

R75

MKP Series

REDUCED SIZES

METALLIZED POLYPROPYLENE FILM CAPACITOR

D.C. AND PULSE APPLICATIONS

PRODUCT CODE: R75 (Digit 12: A to Z)

MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)

Note: p (pitch) in mm.