KBPC600 – KBPC610 1 of 3 © 2002 Won-Top Electronics
KBPC600 – KBPC610
6.0A BRIDGE RECTIFIER
Features
! Diffused Junction
! High Current Capability
! High Case Dielectric Strength H
! High Surge Current Capability
! Ideal for Printed Circuit Board Application + ~
! Plastic Material has Underwriters Laboratory G
Flammability Classification 94V-O A
! UL Recognized File # E157705 ~ -
E
Mechanical Data
! Case: Molded Plastic D C
! Terminals: Plated Leads Solderable per
MIL-STD- 202, Met hod 208
! Polarity: Marked on Body B
! Weight: 3.8 grams (approx.) A
! Mounting Position: Through Hole for #6 Screw
! Mounting Torque: 5.0 Inch-pounds Maximum
! Marking: Type Number
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specifi ed
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derat e current by 20%.
Characteristic Symbol KBPC
600 KPBC
601 KBPC
602 KBPC
604 KBPC
606 KBPC
608 KBPC
610 Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current (Note 1) @TC = 50°C IO6.0 A
Non-Repetiti ve P eak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method) IFSM 125 A
Forward Voltage (per element) @IF = 3.0A VFM 1.1 V
Peak Reverse Current @T
C = 25°C
At Rated DC Blocking Voltage @TC = 100°C IR10
1.0 µA
mA
I2t Rating for Fusing (t<8.3ms) (Note 2) I2t64 A2s
Typical Junction Capacitance (Note 3) Cj55 pF
Typical Thermal Resistance (Note 4) RJC 12.5 K/W
Operating and Storage Temperat ure Range Tj, TSTG -65 to +125 °C
Note: 1. Mounted on metal chassis.
2. Non-repetit i ve, for t > 1ms and < 8.3ms.
3. Measured at 1.0 MHz and applied reverse volt age of 4.0V D.C.
4. Thermal resistanc e juncti on to case per element.
WTE
PO WER SEM IC OND UCTOR S
KBPC-6
Dim Min Max
A14.73 15.75
B5.80 6.90
C19.00 —
D1.00 Ø Typical
E1.70 2.72
Hole for #6 screw
G3.60 4.00
H10.30 11.30
All Dimensions in mm
0.01
0.1
1.0
10
100
0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig.2TypicalForwardCharacteristics, per element
F
Pulse width = 300 s
µ
T = 25 C
j°
0
25
50
75
100
125
1 10 100
I , PEAK FWD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 3 Peak Forward Surge Current
8.3ms Single half-sine-wave
T = 125 C
J
°
0
2
4
6
8
10
0 50 100 150
I , AVG FWD OUTPUT CURRENT (A)
(AV)
T , CASE TEMPERATURE ( C)
Fig. 1 Forward Current Derating Curve
C
°
Resistive or
Inductive Load
Mounted on
Metal Chassis
Mounted on
PC Board
0.01
0.1
1.0
10
0 20 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics
T = 100 C
j
°
T = 25 C
j
°
I , INSTANTANEOUS REVERSE CURRENT (µA)
R
KBPC600 – KBPC610 2 of 3 © 2002 Won-Top Electronics
KBPC600 – KBPC610 3 of 3 © 2002 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
KBPC600 Square Bridge 200 Units/Box
KBPC601 Square Bridge 200 Units/Box
KBPC602 Square Bridge 200 Units/Box
KBPC604 Square Bridge 200 Units/Box
KBPC606 Square Bridge 200 Units/Box
KBPC608 Square Bridge 200 Units/Box
KBPC610 Square Bridge 200 Units/Box
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang Nort h 3rd Road, Chine Chen Dist., Kaohsi ung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wontop.com
