Download
Cable Solutions
from Xilinx
Features:
• Superior speed: Configures V1000
device in SelectMAP™ mode in less than
5 seconds
• Automatic support for 5V, 3.3V, and
2.5V standards/target systems
• CE certified and USB compliant
• Accepts any supply voltage from 2.5V to
5V as power input (from target application
or external power supply)
• Comes with USB cable, RS-232 cable,
DB25M to DB9M adapter, and DB25F
to DB9M adapter
• Software reconfigurable
• Interfaces to target hardware with 4 sets
of versatile flying wires: JTAG, Slave
Serial, and SelectMAP mode
• Supports JTAG (IEEE 1149.1) configuration for:
– Virtex-II/Pro, Virtex Series, Spartan Series,
XC4000 Series, and XC5200 FPGAs
– CoolRunner-II, CoolRunner, and XC9500
Series CPLDs
– ISP PROMs (XC18V00)
– System ACE MPM
• Supports serial download, verification and
debug for any size Virtex-II/Pro, Virtex Series,
Spartan Series, XC4000 Series, and XC5200
FPGAs
The MultiLINX cable takes advantage of the USB port found on newer PCs.
MultiLINX features an adjusting voltage that enables it to talk to system and I/Os
operating at 5V, 3.3V, and 2.5V.
MultiLINX Cable
Feature Comparison Chart
MultiLINX
HW-MULTILINX
USB & Standard RS-232
Windows 98/NT (4.0+)/2000,
Sun Solaris, HP-UX
All Xilinx FPGAs, CPLDs, System ACE
MPMs, and ISP PROMs
JTAG (IEEE 1149.1), Slave Serial,
SelectMAP
Comes with (4) sets of flying wires
Yes
Comes with (2) DB9 to DB25 adapters;
(1) males and (1) female
2.5V, 3.3V, and 5V
$495 USD
Parallel Cable IV
HW-PC4
PC Parallel Port (DB25)
Windows 98/NT (4.0+)/2000
All Xilinx FPGAs, CPLDs, System
ACE MPMs, and ISP PROMs
JTAG (IEEE 1149.1), Slave Serial,
IEEE 1532
Comes with a robust ribbon cable
but flying wires can also be used
(flying wires sold separately)
No
N/A
1.5V, 1.8V, 2.5V, 3.3V, and 5V
$95 USD
Part Number
Connects to
OS Support
Device Support
Configuration Modes
Board Interface
FPGA Readback
Serial Port Adapets
I/O Voltage Support
Price
Corporate Headquarters
Xilinx, Inc.
2100 Logic Drive
San Jose, CA 95124
Tel: (408) 559-7778
Fax: (408) 559-7114
Web: www.xilinx.com
Europe
Xilinx, Ltd.
Benchmark House
203 Brooklands Road
Weybridge
Surrey KT13 ORH
United Kingdom
Tel: 44-870-7350-600
Fax: 44-870-7350-601
Web: www.xilinx.com
Japan
Xilinx, K.K.
Shinjuku Square Tower 18F
6-22-1 Nishi-Shinjuku
Shinjuku-ku, Tokyo
163-1118, Japan
Tel: 81-3-5321-7711
Fax: 81-3-5321-7765
Web: www.xilinx.co.jp
Asia Pacific
Xilinx, Asia Pacific
Unit 1201, Tower 6, Gateway
9 Canton Road
Tsimshatsui, Kowloon,
Hong Kong
Tel: 852-2-424-5200
Fax: 852-2-494-7159
E-mail: hongkong@xilinx.com
©2002, Xilinx, Inc. All rights reserved. The Xilinx name and the Xilinx logo are registered trademarks, Spartan, Virtex, SelectMAP, MultiLINX, and all XC-designated products are trademarks, and The Programmable Logic Company is a
service mark of Xilinx, Inc. All other trademarks and registered trademarks are the property of their respective owners.
Printed in U.S.A. PN 0010475-2
The Programmable Logic CompanySM
Parallel Cable IV
(PC only)
Features:
•
Downloads to all Xilinx FPGAs, CPLDs, ISP
PROMs, and System ACE MPM using JTAG
(IEEE 1149.1) or Slave Serial modes
•
Automatically adjusts to operating voltages
from 1.5V to 5V
•
Speeds up to 5Mbps
•
Draws power directly from the PC (through
the mouse/keyboard port) or an external
power supply
•
Comes with a robust ribbon cable
•
Backward compatible to Parallel Cable III
using the flying wires
•
Interfaces to PC printer port
For more information about Xilinx cables, or to purchase a cable, please visit the Xilinx website.
http://www.xilinx.com
Turn this card over to see the cable feature comparison chart.
The Parallel Cable IV from Xilinx is a very cost effective solution that interfaces with
the printer port on your PC. The PCIV comes with a robust ribbon cable that enables
you to perform JTAG and Slave Serial configurations at the highest speeds.
