M48Z35 M48Z35Y 256 Kbit (32 Kbit x 8) ZEROPOWER(R) SRAM Features Integrated, ultra low power SRAM, power-fail control circuit, and battery READ cycle time equals WRITE cycle time Automatic power-fail chip deselect and WRITE protection WRITE protect voltages: (VPFD = power-fail deselect voltage) - M48Z35: VCC = 4.75 to 5.5 V; 4.5 V VPFD 4.75 V - M48Z35Y: 4.5 to 5.5 V; 4.2 V VPFD 4.5 V 1 PCDIP28 battery CAPHATTM SNAPHAT(R) battery Self-contained battery in the CAPHATTM DIP package Packaging includes a 28-lead SOIC and SNAPHAT(R) top (to be ordered separately) Pin and function compatible with JEDEC standard 32 K x 8 SRAMs SOIC package provides direct connection for a SNAPHAT(R) top which contains the battery RoHS compliant - Lead-free second level interconnect June 2011 28 28 1 SOH28 Doc ID 2608 Rev 10 1/24 www.st.com 1 Contents M48Z35, M48Z35Y Contents 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 Operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.1 READ mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.2 WRITE mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.3 Data retention mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.4 VCC noise and negative going transients . . . . . . . . . . . . . . . . . . . . . . . . . 13 3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4 DC and AC parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6 Part numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7 Environmental information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2/24 Doc ID 2608 Rev 10 M48Z35, M48Z35Y List of tables List of tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Table 9. Table 10. Table 11. Table 12. Table 13. Table 14. Table 15. Table 16. Table 17. Signal names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 READ mode AC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 WRITE mode AC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Power down/up AC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Power down/up trip points DC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Operating and AC measurement conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Capacitance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DC characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 PMDIP28 - 28-pin plastic DIP, battery CAPHATTM, pack. mech. data. . . . . . . . . . . . . . . . 17 SOH28 - 28-lead plastic small outline, battery SNAPHAT(R), pack. mech. data . . . . . . . . . 18 SH - 4-pin SNAPHAT(R) housing for 48 mAh battery, pack. mech. data . . . . . . . . . . . . . . . 19 SH - 4-pin SNAPHAT(R) housing for 120 mAh battery, pack. mech. data . . . . . . . . . . . . . . 20 Ordering information scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SNAPHAT(R) battery table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Doc ID 2608 Rev 10 3/24 List of figures M48Z35, M48Z35Y List of figures Figure 1. Figure 2. Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. Figure 9. Figure 10. Figure 11. Figure 12. Figure 13. Figure 14. Figure 15. 4/24 Logic diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DIP connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SOIC connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 READ mode AC waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 WRITE enable controlled, WRITE AC waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Chip enable controlled, WRITE AC waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Power down/up mode AC waveforms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Supply voltage protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 AC measurement load circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PCDIP28 - 28-pin plastic DIP, battery CAPHATTM, package outline . . . . . . . . . . . . . . . . . 17 SOH28 - 28-lead plastic small outline, battery SNAPHAT(R), pack. outline. . . . . . . . . . . . . 18 SH - 4-pin SNAPHAT(R) housing for 48 mAh battery, package outline . . . . . . . . . . . . . . . . 19 SH - 4-pin SNAPHAT(R) housing for 120 mAh battery, package outline . . . . . . . . . . . . . . . 20 Recycling symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Doc ID 2608 Rev 10 M48Z35, M48Z35Y 1 Description Description The M48Z35/Y ZEROPOWER(R) RAM is a 32 K x 8, non-volatile static RAM that integrates power-fail deselect circuitry and battery control logic on a single die. The monolithic chip is available in two special packages to provide a highly integrated battery-backed memory solution. The M48Z35/Y is a non-volatile pin and function equivalent to any JEDEC standard 32 K x 8 SRAM. It also easily fits into many ROM, EPROM, and EEPROM sockets, providing the non-volatility of PROMs without any requirement for special WRITE timing or limitations on the number of WRITEs that can be performed. The 28-pin 600 mil DIP CAPHATTM houses the M48Z35/Y silicon with a long life lithium button cell in a single package. The 28-pin 330 mil SOIC provides sockets with gold plated contacts at both ends for direct connection to a separate SNAPHAT(R) housing containing the battery. The unique design allows the SNAPHAT battery package to be mounted on top of the SOIC package after the completion of the surface mount process. Insertion of the SNAPHAT housing after reflow prevents potential battery damage due to the high temperatures required for device surfacemounting. The SNAPHAT housing is keyed to prevent reverse insertion. The SOIC and battery packages are shipped separately in plastic anti-static tubes or in tape & reel form. For the 28-lead SOIC, the battery package (i.e. SNAPHAT) part number is "M4Z28BR00SH1." Figure 1. Logic diagram VCC 15 8 A0-A14 W DQ0-DQ7 M48Z35 M48Z35Y E G VSS Doc ID 2608 Rev 10 AI01616D 5/24 Description M48Z35, M48Z35Y Table 1. Signal names A0-A14 Address inputs DQ0-DQ7 Figure 2. Data inputs / outputs E Chip enable input G Output enable input W WRITE enable input VCC Supply voltage VSS Ground DIP connections A14 A12 A7 A6 A5 A4 A3 A2 A1 A0 DQ0 DQ1 DQ2 VSS 28 1 27 2 26 3 4 25 24 5 23 6 7 M48Z35 22 8 M48Z35Y 21 20 9 19 10 18 11 17 12 13 16 14 15 VCC W A13 A8 A9 A11 G A10 E DQ7 DQ6 DQ5 DQ4 DQ3 AI01617D Figure 3. SOIC connections A14 A12 A7 A6 A5 A4 A3 A2 A1 A0 DQ0 DQ1 DQ2 VSS 1 28 27 2 26 3 25 4 24 5 23 6 22 7 M48Z35Y 21 8 20 9 19 10 18 11 17 12 16 13 15 14 VCC W A13 A8 A9 A11 G A10 E DQ7 DQ6 DQ5 DQ4 DQ3 AI02303C 6/24 Doc ID 2608 Rev 10 M48Z35, M48Z35Y Figure 4. Description Block diagram A0-A14 LITHIUM CELL POWER VOLTAGE SENSE AND SWITCHING CIRCUITRY 32K x 8 SRAM ARRAY DQ0-DQ7 E VPFD W G VSS VCC Doc ID 2608 Rev 10 AI01619B 7/24 Operating modes 2 M48Z35, M48Z35Y Operating modes The M48Z35/Y also has its own power-fail detect circuit. The control circuitry constantly monitors the single 5 V supply for an out of tolerance condition. When VCC is out of tolerance, the circuit write protects the SRAM, providing a high degree of data security in the midst of unpredictable system operation brought on by low VCC. As VCC falls below approximately 3 V, the control circuitry connects the battery which maintains data until valid power returns. Table 2. Operating modes Mode VCC Deselect WRITE READ 4.75 to 5.5 V or 4.5 to 5.5 V READ Deselect Deselect VSO to VPFD (min)(1) VSO(1) E G W DQ0-DQ7 Power VIH X X High Z Standby VIL X VIL DIN Active VIL VIL VIH DOUT Active VIL VIH VIH High Z Active X X X High Z CMOS standby X X X High Z Battery backup mode 1. See Table 6 on page 12 for details. Note: X = VIH or VIL; VSO = Battery backup switchover voltage. 2.1 READ mode The M48Z35/Y is in the READ mode whenever W (WRITE enable) is high, E (chip enable) is low. The device architecture allows ripple-through access of data from eight of 264,144 locations in the static storage array. Thus, the unique address specified by the 15 address inputs defines which one of the 32,768 bytes of data is to be accessed. Valid data will be available at the data I/O pins within address access time (tAVQV) after the last address input signal is stable, providing that the E and G access times are also satisfied. If the E and G access times are not met, valid data will be available after the latter of the chip enable access time (tELQV) or output enable access time (tGLQV). The state of the eight three-state data I/O signals is controlled by E and G. If the outputs are activated before tAVQV, the data lines will be driven to an indeterminate state until tAVQV. If the address inputs are changed while E and G remain active, output data will remain valid for output data hold time (tAXQX) but will go indeterminate until the next address access. 8/24 Doc ID 2608 Rev 10 M48Z35, M48Z35Y Figure 5. Operating modes READ mode AC waveforms tAVAV VALID A0-A14 tAVQV tAXQX tELQV tEHQZ E tELQX tGLQV tGHQZ G tGLQX DQ0-DQ7 VALID AI00925 Note: WRITE enable (W) = High. Table 3. READ mode AC characteristics M48Z35/Y Parameter(1) Symbol -70 Min tAVAV READ cycle time Unit Max 70 ns tAVQV(2) Address valid to output valid 70 ns tELQV(2) Chip enable low to output valid 70 ns tGLQV(2) tELQX(3) tGLQX(3) tEHQZ(3) tGHQZ(3) tAXQX(2) Output enable low to output valid 35 ns Chip enable low to output transition 5 ns Output enable low to output transition 5 ns Chip enable high to output Hi-Z 25 ns Output enable high to output Hi-Z 25 ns Address transition to output transition 10 ns 1. Valid for ambient operating temperature: TA = 0 to 70 C; VCC = 4.75 to 5.5 V or 4.5 to 5.5 V (except where noted). 2. CL = 100 pF. 3. CL = 5 pF. Doc ID 2608 Rev 10 9/24 Operating modes 2.2 M48Z35, M48Z35Y WRITE mode The M48Z35/Y is in the WRITE mode whenever W and E are low. The start of a WRITE is referenced from the latter occurring falling edge of W or E. A WRITE is terminated by the earlier rising edge of W or E. The addresses must be held valid throughout the cycle. E or W must return high for a minimum of tEHAX from chip enable or tWHAX from WRITE enable prior to the initiation of another READ or WRITE cycle. Data-in must be valid tDVWH prior to the end of WRITE and remain valid for tWHDX afterward. G should be kept high during WRITE cycles to avoid bus contention; although, if the output bus has been activated by a low on E and G, a low on W will disable the outputs tWLQZ after W falls. Figure 6. WRITE enable controlled, WRITE AC waveforms tAVAV VALID A0-A14 tAVWH tAVEL tWHAX E tWLWH tAVWL W tWLQZ tWHQX tWHDX DQ0-DQ7 DATA INPUT tDVWH Figure 7. AI00926 Chip enable controlled, WRITE AC waveforms tAVAV A0-A14 VALID tAVEH tAVEL tELEH tEHAX E tAVWL W tEHDX DQ0-DQ7 DATA INPUT tDVEH 10/24 Doc ID 2608 Rev 10 AI00927 M48Z35, M48Z35Y Table 4. Operating modes WRITE mode AC characteristics M48Z35/Y Parameter(1) Symbol -70 Min Unit Max tAVAV WRITE cycle time 70 ns tAVWL Address valid to WRITE enable low 0 ns tAVEL Address valid to chip enable low 0 ns tWLWH WRITE enable pulse width 50 ns tELEH Chip enable low to chip enable high 55 ns tWHAX WRITE enable high to address transition 0 ns tEHAX Chip enable high to address transition 0 ns tDVWH Input valid to WRITE enable high 30 ns tDVEH Input valid to chip enable high 30 ns tWHDX WRITE enable high to input transition 5 ns tEHDX Chip enable high to input transition 5 ns tWLQZ(2)(3) WRITE enable low to output Hi-Z 25 ns tAVWH Address valid to WRITE enable high 60 ns tAVEH Address valid to chip enable high 60 ns WRITE enable high to output transition 5 ns tWHQX (2)(3) 1. Valid for ambient operating temperature: TA = 0 to 70 C; VCC = 4.75 to 5.5 V or 4.5 to 5.5 V (except where noted). 2. CL = 5 pF (see Figure 10 on page 15). 3. If E goes low simultaneously with W going low, the outputs remain in the high impedance state. 2.3 Data retention mode With valid VCC applied, the M48Z35/Y operates as a conventional BYTEWIDETM static RAM. Should the supply voltage decay, the RAM will automatically power-fail deselect, write protecting itself when VCC falls within the VPFD(max), VPFD(min) window. All outputs become high impedance, and all inputs are treated as "don't care." Note: A power failure during a WRITE cycle may corrupt data at the currently addressed location, but does not jeopardize the rest of the RAM's content. At voltages below VPFD(min), the user can be assured the memory will be in a write protected state, provided the VCC fall time is not less than tF. The M48Z35/Y may respond to transient noise spikes on VCC that reach into the deselect window during the time the device is sampling VCC. Therefore, decoupling of the power supply lines is recommended. When VCC drops below VSO, the control circuit switches power to the internal battery which preserves data. The internal button cell will maintain data in the M48Z35/Y for an accumulated period of at least 10 years (at 25C) when VCC is less than VSO. As system power returns and VCC rises above VSO, the battery is disconnected, and the power supply is switched to external VCC. Write protection continues until VCC reaches VPFD(min) plus tREC(min). Normal RAM operation can resume tREC after VCC exceeds VPFD(max). For more information on battery storage life refer to the application note AN1012. Doc ID 2608 Rev 10 11/24 Operating modes Figure 8. M48Z35, M48Z35Y Power down/up mode AC waveforms VCC VPFD (max) VPFD (min) VSO tF tR tFB tRB tDR tPD INPUTS trec DON'T CARE RECOGNIZED RECOGNIZED HIGH-Z OUTPUTS VALID VALID (PER CONTROL INPUT) (PER CONTROL INPUT) AI01168C Table 5. Power down/up AC characteristics Parameter(1) Symbol Min Unit 0 s VPFD (max) to VPFD (min) VCC fall time 300 s VPFD (min) to VSS VCC fall time 10 s tR VPFD (min) to VPFD (max) VCC rise time 10 s tRB VSS to VPFD (min) VCC rise time 1 trec VPFD (max) to inputs recognized 40 tPD tF(2) tFB(3) E or W at VIH before power down Max s 200 ms 1. Valid for ambient operating temperature: TA = 0 to 70 C; VCC = 4.75 to 5.5 V or 4.5 to 5.5 V (except where noted). 2. VPFD (max) to VPFD (min) fall time of less than tF may result in deselection/write protection not occurring until 200 s after VCC passes VPFD (min). 3. VPFD (min) to VSS fall time of less than tFB may cause corruption of RAM data. Table 6. Power down/up trip points DC characteristics Parameter(1) Symbol VPFD Power-fail deselect voltage VSO Battery backup switchover voltage tDR(2) Expected data retention time Min Typ Max Unit M48Z35 4.5 4.6 4.75 V M48Z35Y 4.2 4.35 4.5 M48Z35/Y 3.0 10 1. Valid for ambient operating temperature: TA = 0 to 70 C; VCC = 4.75 to 5.5V or 4.5 to 5.5V (except where noted). 2. At 25 C, VCC = 0 V. Note: 12/24 All voltages referenced to VSS. Doc ID 2608 Rev 10 V V Years M48Z35, M48Z35Y 2.4 Operating modes VCC noise and negative going transients ICC transients, including those produced by output switching, can produce voltage fluctuations, resulting in spikes on the VCC bus. These transients can be reduced if capacitors are used to store energy which stabilizes the VCC bus. The energy stored in the bypass capacitors will be released as low going spikes are generated or energy will be absorbed when overshoots occur. A ceramic bypass capacitor value of 0.1 F (see Figure 9) is recommended in order to provide the needed filtering. In addition to transients that are caused by normal SRAM operation, power cycling can generate negative voltage spikes on VCC that drive it to values below VSS by as much as one volt. These negative spikes can cause data corruption in the SRAM while in battery backup mode. To protect from these voltage spikes, ST recommends connecting a Schottky diode from VCC to VSS (cathode connected to VCC, anode to VSS). (Schottky diode 1N5817 is recommended for through hole and MBRS120T3 is recommended for surface mount). Figure 9. Supply voltage protection VCC VCC 0.1F DEVICE VSS AI02169 Doc ID 2608 Rev 10 13/24 Maximum ratings 3 M48Z35, M48Z35Y Maximum ratings Stressing the device above the rating listed in the absolute maximum ratings table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Table 7. Absolute maximum ratings Symbol TA TSTG TSLD (1)(2) Parameter Ambient operating temperature Storage temperature (VCC off, oscillator off) Value Unit 0 to 70 C SNAPHAT(R) top -40 to 85 C CAPHAT(R) DIP -40 to 85 C SOH28 -55 to 125 C 260 C Lead solder temperature for 10 seconds VIO Input or output voltages -0.3 to 7.0 V VCC Supply voltage -0.3 to 7.0 V IO Output current 20 mA PD Power dissipation 1 W 1. For DIP package, soldering temperature of the IC leads is to not exceed 260 C for 10 seconds. Furthermore, the devices shall not be exposed to IR reflow nor preheat cycles (as performed as part of wave soldering). ST recommends the devices be hand-soldered or placed in sockets to avoid heat damage to the batteries. 2. For SOH28 package, lead-free (Pb-free) lead finish: reflow at peak temperature of 260 C (the time above 255 C must not exceed 30 seconds). Caution: Negative undershoots below -0.3 V are not allowed on any pin while in the battery backup mode. Caution: Do NOT wave solder SOIC to avoid damaging SNAPHAT(R) sockets. 14/24 Doc ID 2608 Rev 10 M48Z35, M48Z35Y 4 DC and AC parameters DC and AC parameters This section summarizes the operating and measurement conditions, as well as the DC and AC characteristics of the device. The parameters in the following DC and AC characteristic tables are derived from tests performed under the measurement conditions listed in Table 8: Operating and AC measurement conditions. Designers should check that the operating conditions in their projects match the measurement conditions when using the quoted parameters. Table 8. Operating and AC measurement conditions Parameter Supply voltage (VCC) Ambient operating temperature (TA) M48Z35Y Unit 4.75 to 5.5 4.5 to 5.5 V 0 to 70 0 to 70 C Load capacitance (CL) 100 100 pF Input rise and fall times 5 5 ns 0 to 3 0 to 3 V 1.5 1.5 V Input pulse voltages Input and output timing ref. voltages Note: M48Z35 Output Hi-Z is defined as the point where data is no longer driven. Figure 10. AC measurement load circuit 645 DEVICE UNDER TEST CL = 100pF or 5pF 1.75V CL includes JIG capacitance Table 9. Capacitance Parameter(1)(2) Symbol CIN CIO(3) AI03211 Min Max Unit Input capacitance - 10 pF Input / output capacitance - 10 pF 1. Effective capacitance measured with power supply at 5 V. Sampled only, not 100% tested. 2. Outputs deselected. 3. At 25 C. Doc ID 2608 Rev 10 15/24 DC and AC parameters Table 10. DC characteristics Symbol Parameter ILI(2) ILO (2) Input leakage current Output leakage current M48Z35, M48Z35Y Test condition(1) Min Max Unit 0 V VIN VCC 1 A 0 V VOUT VCC 5 A Outputs open 50 mA E = VIH 3 mA E = VCC - 0.2 V 3 mA ICC Supply current ICC1 Supply current (standby) TTL ICC2 Supply current (standby) CMOS VIL Input low voltage -0.3 0.8 V VIH Input high voltage 2.2 VCC + 0.3 V VOL Output low voltage IOL = 2.1 mA 0.4 V VOH Output high voltage IOH = -1 mA 2.4 1. Valid for ambient operating temperature: TA = 0 to 70 C; VCC = 4.75 to 5.5 V or 4.5 to 5.5 V (except where noted). 2. Outputs deselected. 16/24 Doc ID 2608 Rev 10 V M48Z35, M48Z35Y 5 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Figure 11. PCDIP28 - 28-pin plastic DIP, battery CAPHATTM, package outline A2 A1 B1 B A L C e1 eA e3 D N E 1 PCDIP Note: Drawing is not to scale. Table 11. PMDIP28 - 28-pin plastic DIP, battery CAPHATTM, pack. mech. data mm inches Symbol Typ Min Max A 8.89 A1 Min Max 9.65 0.350 0.380 0.38 0.76 0.015 0.030 A2 8.38 8.89 0.330 0.350 B 0.38 0.53 0.015 0.021 B1 1.14 1.78 0.045 0.070 C 0.20 0.31 0.008 0.012 D 39.37 39.88 1.550 1.570 E 17.83 18.34 0.702 0.722 e1 2.29 2.79 0.090 0.110 e3 33.02 Typ 1.3 eA 15.24 16.00 0.600 0.630 L 3.05 3.81 0.120 0.150 N 28 Doc ID 2608 Rev 10 28 17/24 Package mechanical data M48Z35, M48Z35Y Figure 12. SOH28 - 28-lead plastic small outline, battery SNAPHAT(R), pack. outline A2 A C B eB e CP D N E H A1 L 1 SOH-A Note: Drawing is not to scale. Table 12. SOH28 - 28-lead plastic small outline, battery SNAPHAT(R), pack. mech. data mm inches Symbol Typ Min A Typ Min Max 3.05 0.120 A1 0.05 0.36 0.002 0.014 A2 2.34 2.69 0.092 0.106 B 0.36 0.51 0.014 0.020 C 0.15 0.32 0.006 0.012 D 17.71 18.49 0.697 0.728 E 8.23 8.89 0.324 0.350 - - - - e 1.27 0.050 eB 3.20 3.61 0.126 0.142 H 11.51 12.70 0.453 0.500 L 0.41 1.27 0.016 0.050 a 0 8 0 8 N 28 CP 18/24 Max 28 0.10 Doc ID 2608 Rev 10 0.004 M48Z35, M48Z35Y Package mechanical data Figure 13. SH - 4-pin SNAPHAT(R) housing for 48 mAh battery, package outline A1 A2 A eA A3 B L eB D E SHZP-A Note: Drawing is not to scale. Table 13. SH - 4-pin SNAPHAT(R) housing for 48 mAh battery, pack. mech. data mm inches Symbol Typ Min A Max Typ Min 9.78 Max 0.385 A1 6.73 7.24 0.265 0.285 A2 6.48 6.99 0.255 0.275 A3 0.38 0.015 B 0.46 0.56 0.018 0.022 D 21.21 21.84 0.835 0.860 E 14.22 14.99 0.560 0.590 eA 15.55 15.95 0.612 0.628 eB 3.20 3.61 0.126 0.142 L 2.03 2.29 0.080 0.090 Doc ID 2608 Rev 10 19/24 Package mechanical data M48Z35, M48Z35Y Figure 14. SH - 4-pin SNAPHAT(R) housing for 120 mAh battery, package outline A1 A2 A eA A3 B L eB D E SHZP-A Note: Drawing is not to scale. Table 14. SH - 4-pin SNAPHAT(R) housing for 120 mAh battery, pack. mech. data mm inches Symb Typ Min A Typ Min 10.54 Max 0.415 A1 8.00 8.51 0.315 0.335 A2 7.24 8.00 0.285 0.315 A3 20/24 Max 0.38 0.015 B 0.46 0.56 0.018 0.022 D 21.21 21.84 0.835 0.860 E 17.27 18.03 0.680 0.710 eA 15.55 15.95 0.612 0.628 eB 3.20 3.61 0.126 0.142 L 2.03 2.29 0.080 0.090 Doc ID 2608 Rev 10 M48Z35, M48Z35Y 6 Part numbering Part numbering Table 15. Ordering information scheme Example: M48Z 35Y -70 MH 1 E Device type M48Z Supply voltage and write protect voltage 35(1) = VCC = 4.75 to 5.5 V; VPFD = 4.5 to 4.75 V 35Y = VCC = 4.5 to 5.5 V; VPFD = 4.2 to 4.5 V Speed -70 = 70 ns Package PC = PCDIP28 MH(2) = SOH28 Temperature range 1 = 0 to 70 C Shipping method For SOH28: E = Lead-free ECOPACK(R) package, tubes F = Lead-free ECOPACK(R) package, tape & reel For PCDIP28: blank = Tubes 1. The M48Z35 part is offered with the PCDIP28 (CAPHAT) package only. 2. The SOIC package (SOH28) requires the SNAPHAT(R) battery package which is ordered separately under the part number "M4Zxx-BR00SH1" in plastic tubes (see Table 16). Caution: Do not place the SNAPHAT battery package "M4Zxx-BR00SH1" in conductive foam as it will drain the lithium button-cell battery. For other options, or for more information on any aspect of this device, please contact the ST sales office nearest you. Table 16. SNAPHAT(R) battery table Part number M4Z28-BR00SH1 M4Z32-BR00SH1 Description Lithium battery (48 mAh) Package SNAPHAT(R) (R) Lithium battery (120 mAh) SNAPHAT Doc ID 2608 Rev 10 SH SH 21/24 Environmental information 7 M48Z35, M48Z35Y Environmental information Figure 15. Recycling symbols This product contains a non-rechargeable lithium (lithium carbon monofluoride chemistry) button cell battery fully encapsulated in the final product. Recycle or dispose of batteries in accordance with the battery manufacturer's instructions and local/national disposal and recycling regulations. 22/24 Doc ID 2608 Rev 10 M48Z35, M48Z35Y 8 Revision history Revision history Table 17. Document revision history Date Revision Aug-1999 1 Changes First issue 21-Apr-2000 1.1 10-May-2001 2 SH and SH28 packages for 2-pin and 2-socket removed 29-May-2002 2.1 02-Apr-2003 3 v2.2 template applied; test condition updated (Table 6) 03-Mar-2004 4 Reformatted; updated with Lead-free information (Table 7, 15) 20-Aug-2004 5 Reformatted; remove references to `crystal' (cover page) 09-Jun-2005 6 Removal of SNAPHAT(R), industrial temperature sales types (Table 3, , 5, 6, 7, 8, 10, 15) 02-Nov-2007 7 Reformatted; added lead-free second level interconnect information to cover page and Section 5: Package mechanical data; updated Table 7, 15, 16. 25-Mar-2009 8 Updated Table 7, text in Section 5: Package mechanical data; added Section 7: Environmental information. 19-Aug-2010 9 Updated Section 3, Table 11; reformatted document. 07-Jun-2011 10 Updated footnote 1 of Table 7: Absolute maximum ratings; updated Section 7: Environmental information. Reformatted; added temperature information (Table 9, 10, 3, , 5, 6) Modified reflow time and temperature footnotes (Table 7) Doc ID 2608 Rev 10 23/24 M48Z35, M48Z35Y Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 24/24 Doc ID 2608 Rev 10