FM Series for Automatic Assembly The FM series includes small, resin-molded electric double-layer capacitors suitable for automatic assembly. These capacitors are ideal as long-time backup devices for minute-current loads in VCRs, audio systems, cordless telephones, and compact electronic systems. (FME types are backup devices adaptable to current consumption mA level.) Features * High adaptability to automatic assembly * Can be cleaned * Excellent voltage holding characteristics ideal for long-time supply of 1 A to several hundred A (Except 3.5 V type, FME type) * Space saving Applications Backup of CMOS microcomputers, static RAMs, and DTSs Part Number System * Bulk FM 0H 473 Z F Environmental Impact Reduced Product Capacitance tolerance Z: +80%, -20% Nominal capacitance First two digits represent significant figures. Third digit specifies number of zeros to follow F code. Maximum operating voltage 0H: 5.5 Vdc 0V: 3.5 Vdc 0 J: 6.5 Vdc Super Capacitor: FM series FME type FMR type FMC type * Tape (Ammo Pack) FM0H223Z TP 16 Height of component from tape center. 16: 16 mm, 18: 18 mm Tape packaging Part number of bulk packaging Number of Packed Capacitors Tape: 1000 pcs./box 16 Super Capacitors Vol.07 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Markings Negative polarity identification NT Nominal capacitance Maximum rated voltage 5.5 V 473 E - K1 E:FME type Marking R:FMR type Marking + Date code Polarity Dimensions 10.5 0.5 T 0.5 (0.413) 11.5 0.5 (0.453) 0.4 (0.016) *5 1 (0.197) 0.5 0.1 0.4 0.1 (0.020) Unit: mm (inch) (0.016) 5 0.5 (0.197) *Bulk Type Standard Rating 5.5 V Type Part Number Ammo pack Max. Voltage Max. ESR Max. Current Operating Nominal Capacitance at 30 Holding (at 1 kHz) Voltage Charge System Discharge System minutes Characteristic () (VDC) (mA) Min. (V) (F) (F) T mm (inch) Weight g (oz) FM0H103ZF FM0H103ZFTP ( ) 5.5 0.01 0.014 300 0.015 4.2 5.0 (0.197) 1.3 (0.046) FM0H223ZF FM0H223ZFTP ( ) 5.5 0.022 0.028 200 0.033 4.2 5.0 (0.197) 1.3 (0.046) FM0H473ZF FM0H473ZFTP ( ) 5.5 0.047 0.06 200 0.071 4.2 5.0 (0.197) 1.3 (0.046) FM0H104ZF FM0H104ZFTP ( ) 5.5 0.10 0.13 100 0.15 4.2 6.5 (0.256) 1.6 (0.056) FM0H224ZF FM0H224ZFTP ( ) 5.5 - 0.22 100 0.33 4.2 6.5 (0.256) 1.6 (0.056) Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.) Super Capacitors Vol.07 17 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E 3.5 V Type Part Number Ammo pack FM0V473ZF FM0V104ZF FM0V224ZF FM0V473ZFTP ( ) FM0V104ZFTP ( ) FM0V224ZFTP ( ) Max. Nominal Capacitance Operating Voltage Charge System Discharge System (VDC) (F) (F) 3.5 3.5 3.5 0.047 0.10 0.22 0.06 0.13 0.30 T mm Weight g () Max. Current at 30 minutes (mA) (inch) (oz) 200 0.042 5.0 1.3 (0.197) (0.046) Max. ESR (at 1 kHz) 100 0.090 100 0.20 5.0 1.3 (0.197) (0.046) 6.5 1.6 (0.256) (0.056) Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.) FME Type ( Backup Large Current , mA Order ) Part Number Ammo pack FME0H223ZF FME0H223ZFTP ( ) FME0H473ZF FME0H473ZFTP ( ) Max. Nominal Capacitance Operating Voltage Charge System Discharge System (VDC) (F) (F) 5.5 5.5 0.022 0.047 0.028 0.06 (at 1 kHz) () Max. Current at 30 minutes (mA) 40 0.033 Max. ESR 20 0.071 T Weight mm (inch) g (oz) 5.0 1.3 (0.197) (0.046) 5.0 1.3 (0.197) (0.046) Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.) FMR Type ( Max. Operating Temperature 85C type ) Part Number Ammo pack FMR0H473ZF FMR0H473ZFTP ( ) Max. Nominal Capacitance Operating Voltage Charge System Discharge System (VDC) (F) (F) 5.5 0.047 0.062 Max. ESR (at 1 kHz) () Max. Current at 30 minutes (mA) Voltage Holding Characteristic Min.(V) T mm (inch) Weight g (oz) 200 0.071 4.2 6.5 1.6 Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.) 6.5V Type Part Number Ammo pack FM0J473ZF FM0J473ZFTP ( ) Max. Nominal Capacitance Operating Voltage Charge System Discharge System (VDC) (F) (F) 6.5 0.047 0.062 Max. ESR (at 1 kHz) () Max. Current at 30 minutes (mA) T mm (inch) Weight g (oz) 200 0.085 6.5 1.6 Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26.) 18 Super Capacitors Vol.07 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Specifications: FM Series 5.5V Type Specifications Item Operating Temperature Range -25C to +70C Maximum Operating Voltage 5.5 VDC Nominal Capacitance Range Refer to standard ratings Capacitance Allowance +80%, -20% Equivalent Series Resistance Refer to standard ratings Current (30-minutes value) Refer to characteristics measuring method. Refer to characteristics measuring method. Refer to characteristics measuring method. Refer to standard ratings Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Appearance No obvious abnormality. Capacitance 50% or higher of initial value Equivalent series resistance 4 or less times initial value Capacitance 200% or below of initial value Equivalent series resistance Satisfy initial standard value Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Lead Strengh (Tensile) Current (30-minute value) 1.5 CV (mA) or below Capacitance Within 20% of initial value Equivalent series resistance Satisfy initial standard value Current (30-minute value) Satisfy initial standard value No loosening nor permanent damage of the leads Capacitance Vibration Resistance Equivalent series resistance Solderability Satisfy initial standard value Current (30-minute value) Appearance 3/4 or more of the pin surface should be covered with new solder Equivalent series resistance Satisfy initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Temperature Cycle Humidity Resistance High Temperature Load Equivalent series resistance Satisfy initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Within 20% of initial value Equivalent series resistance 1.2 or less times initial standard value Current (30-minute value) 1.2 or less times initial standard value Appearance No obuious abnormality Capacitance Within 30% of initial value Equivalent series resistance Twice or less times initial standard value Current (30-minute value) Twice or less times initial standard value Appearance No obvious abnormality Voltage Holding Characteristics Conforms to 7.14 Surge Voltage: 6.3 V Temperature: 70 2C Charge: 30 sec. Discharge: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.01F: 1500 0.22F: 56 0.022 F: 560 0.047 F: 300 0.10 F: 150 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10sec. Conforms to 8.2.3 Frequency : 10 to 55 Hz Test duration : 6 hours No obvious abnormality Capacitance Soldering Heat Resistance Test Conditions Conforming to JIS C 5102-1994 Conforms to 8.4 Solder temperature: 245 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: 5.5 Vdc Series protection resistance: 0 Test duration: 1000+48 0 hours Charging condition Voltage applied: 5.0 VDC Series resistance: 0 Charging time: 24hours Storage Time: 24hours Temperature:Lower than 25C Humidity:Lower than 70%RH Voltage between terminal leads higher than 4.2 V (Self Discharge ) Super Capacitors Vol.07 19 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Specifications: FM Series 3.5V Type Specifications Item Operating Temperature Range -25C to +70C Maximum Operating Voltage 3.5 VDC Nominal Capacitance Range Refer to standard ratings Capacitance Allowance +80%, -20% Equivalent Series Resistance Refer to standard ratings Current (30-minutes value) Refer to characteristics measuring method. Refer to characteristics measuring method. Refer to characteristics measuring method. Refer to standard ratings Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Appearance No obvious abnormality Capacitance 50% or higher of initial value Equivalent series resistance 4 or less times initial value Capacitance 200% or below of initial value Equivalent series resistance Satisfy initial standard value Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Lead Strengh (Tensile) Current (30-minute value) 1.5 CV (mA) or below Capacitance Within 20% of initial value Equivalent series resistance Satisfy initial standard value Current (30-minute value) Satisfy initial standard value No loosening nor permanent damage of the leads Capacitance Vibration Resistance Equivalent series resistance Solderability Satisfy initial standard value Current (30-minute value) Appearance Capacitance Soldering Heat Resistance Satisfy initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Temperature Cycle Equivalent series resistance Satisfy initial standard value Current (30-minute value) Humidity Resistance High Temperature Load Conforms to 7.14 Surge voltage: 4.0 V Temperature: 70 2C Charge: 30 sec. Discharge: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.047 F: 300 0.10 F: 150 0.22 F: 56 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10 sec Conforms to 8.2.3 Frequency: 10 to 55 Hz Test duration: 6 hours No considerable abnormality 3/4 or more of the pin surface should be covered with new solder Equivalent series resistance Test Conditions Conforming to JIS C 5102-1994 Appearance No obvious abnormality Capacitance Within 20% of initial value Equivalent series resistance 1.2 or less times initial standard value Current (30-minute value) 1.2 or less times initial standard value Appearance No obvious abnormality Capacitance Within 30% of initial value Equivalent series resistance Twice or less times initial standard value Current (30-minute value) Twice or less times initial standard value Appearance No obvious abnormality Conforms to 8.4 Solder temperature: 245 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from for the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from for the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: 3.5 Vdc Series protection resistance: 0 Test duration: 1000 +48 0 hours 20 Super Capacitors Vol.07 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Specifications: FM Series FME Type Specifications Item Operating Temperature Range -25C to +70C Maximum Operating Voltage 5.5 VDC Nominal Capacitance Range Refer to standard ratings Capacitance Allowance +80%, -20% Equivalent Series Resistance Refer to standard ratings Current (30-minutes value) Refer to standard ratings Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Appearance No obvious abnormality Capacitance 50% or higher of initial value Equivalent series resistance 3 or less times initial value Capacitance 150% or below of initial value Equivalent series resistance Satisfy initial standard value Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Lead Strengh (Tensile) Current (30-minute value) 1.5 CV (mA) or below Capacitance Within 20% of initial value Equivalent series resistance Satisfy initial standard value Current (30-minute value) Satisfy initial standard value No loosening nor permanent damage of the leads Capacitance Vibration Resistance Equivalent series resistance Satisfy initial standard value Current (30-minute value) Appearance Test Conditions Conforming JIS C 5102-1994 Refer to characteristics measuring method. Refer to characteristics measuring method. Refer to characteristics measuring method. Conforms to 7.14 Surge Voltage: 7.4 V Temperature: 70 2C Chargs: 30 sec. Dischargs: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.022 F: 560 0.047 F: 300 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10 sec Conforms to 8.2.3 Frequency: 10 to 55 Hz Test duration: 6 hours There should be no considerable abnormality Conforms to 8.4 Solderability 3/4 or more of the pin surface should be covered with new solder Capacitance Soldering Heat Resistance Equivalent series resistance Satisfy initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Temperature Cycle Humidity Resistance High Temperature Load Equivalent series resistance Satisfy initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Within 20% of initial value Equivalent series resistance 1.2 or less times initial standard value Current (30-minute value) 1.2 or less times initial standard value Appearance No obvious abnormality Capacitance Within 30% of initial value Equivalent series resistance Twice or less times initial standard value Current (30-minute value) Twice or less times initial standard value Appearance No obvious abnormality Solder temperature: 245 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: 5.5 Vdc Series protection resistance: 0 Test duration: 1000 +48 0 hours Super Capacitors Vol.07 21 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Specifications: FM Series FMR Type Specifications Item Operating Temperature Range Maximum Operating Voltage Nominal Capacitance Range Capacitance Allowance Equivalent Series Resistance Current (30-minutes value) -40C to +85C 5.5 VDC Refer to standard ratings +80%, -20% Refer to standard ratings Refer to standard ratings Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Surge Voltage Phase 2 Phase 3 Temperature Variation of Characteristics Phase 5 Phase 6 Appearance No obvious abnormality Capacitance Equivalent series resistance Capacitance Equivalent series resistance Capacitance Equivalent series resistance Current (30-minute value) Capacitance Equivalent series resistance Current (30-minute value) 50% or higher initial value 4 or less times initial value 30% or higher initial value 7 or less times initial value 200% or below initial value Satisfy initial standard value 1.5 CV (mA) or below Within 20% of initial value Satisfy initial standard value Satisfy initial standard value Test Conditions Conforming to JIS C 5102-1994 Refer to characteristics measuring method. Refer to characteristics measuring method. Refer to characteristics measuring method. Conforms to 7.14 Surge Voltage: 6.3 V Temperature: 85 2C Charge: 30 sec. Discharge: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance:300 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 3: -40 2C Phase 4: +25 2C Phase 5: +85 2C Phase 6: +25 2C Lead Strengh (Tensile) No loosening nor permanent damage of the leads Conforms to 8.1.2 (1) 1 kg 10sec. Vibration Resistance Capacitance Equivalent series resistance Current (30-minute value) Appearance Conforms to 8.2.3 Frequency : 10 to 55 Hz Test duration : 6 hours Solderability Soldering Heat Resistance Temperature Cycle Humidity Resistance High Temperature Load Satisfy initial standard value No obvious abnormality 3/4 or more of the pin surface should be covered with new solder. Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Satisfy initial standard value No obvious abnormality Satisfy initial standard value No obvious abnormality Within 20% of initial value 1.2 or less times initial standard value 1.2 or less times initial standard value No obuious abnormality Within 30% of initial value Twice or less times initial standard value Twice or less times initial standard value No obvious abnormality Voltage Holding Characteristics Conforms to 8.4 Solder temperature: 245 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -40C normal temperature +85C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 85 2C Voltage applied: 5.5 Vdc Series protection resistance: 0 Test duration: 1000 +48 0 hours Charging condition Voltage applied: 5.0 VDC Series resistance: 0 Charging time: 24hours Storage Time: 24hours Temperature:Lower than 25C Humidity:Lower than 70%RH Voltage between terminal leads higher than 4.2 V (Self Discharge ) 22 Super Capacitors Vol.07 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Specifications: FM Series 6.5V Type Specifications Item Operating Temperature Range -25C to +70C Maximum Operating Voltage 6.5 VDC Nominal Capacitance Range Refer to standard ratings Capacitance Allowance +80%, -20% Equivalent Series Resistance Refer to standard ratings Current (30-minutes value) Refer to characteristics measuring method. Refer to characteristics measuring method. Refer to characteristics measuring method. Refer to standard ratings Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Appearance No obvious abnormality Capacitance 50% or higher of initial value Equivalent series resistance 4 or less times initial value Capacitance 200% or below of initial value Equivalent series resistance Satisfy initial standard value Current (30-minute value) 1.5 CV (mA) or below Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Lead Strengh (Tensile) Capacitance Within 20% of initial value Equivalent series resistance Satisfy initial standard value Current (30-minute value) Satisfy initial standard value No loosening nor permanent damage of the leads Capacitance Vibration Resistance Equivalent series resistance Solderability Satisfy initial standard value Current (30-minute value) Appearance 3/4 or more of the pin surface should be covered with new solder Equivalent series resistance Satisfy initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Temperature Cycle Humidity Resistance High Temperature Load Equivalent series resistance Conforms to 7.14 Surge Voltage: 7.4 V Temperature: 70 2C Charge: 30 sec. Discharge: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.047 F: 300 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10sec. Conforms to 8.2.3 Frequency : 10 to 55 Hz Test duration : 6 hours No obvious abnormality Capacitance Soidering Heat Resistance Test Conditions Conforming to JIS C 5102-1994 Satisfy initial standard value Current (30-minute value) Appearance No obvious abnormality Capacitance Within 20% of initial value Equivalent series resistance 1.2 or less times initial standard value Current (30-minute value) 1.2 or less times initial standard value Appearance No obuious abnormality Capacitance Within 30% of initial value Equivalent series resistance Twice or less times initial standard value Current (30-minute value) Twice or less times initial standard value Appearance No obvious abnormality Conforms to 8.4 Solder temperature: 245 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: 6.5 Vdc Series protection resistance: 0 Test duration: 1000 +48 0 hours Super Capacitors Vol.07 23 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E FMC Type Markings Negative polarity identification NT Nominal capacitance Maximum rated voltage 5.5 V 473 C - C:FMC type Marking + K1 Date code Polarity Dimensions b 0.5 T 0.5 a 0.5 0.4 *5 1 d1 0.1 d 2 0.1 Unit: mm 5 0.5 *Bulk Type Standard Ratings Part Number Ammo pack FMC0H473ZF FMC0H473ZFTP( ) Max. Nominal Capacitance Max. ESR Max. Current Voltage a b T d1 d2 Weight Holding at 30 Operating Voltage Charge System Discharge System (at 1 kHz) minutes Characteristic ( mA ) (VDC) ( F ) (F) Min. ( V ) (mm) (mm) (mm) (mm) (mm) ( g ) () 5.5 0.047 more than 0.062 less than less than 100 0.071 4.2V 11.5 10.5 5.0 0.5 0.4 1.3 less than more than 4.2V 11.5 10.5 6.5 0.5 0.4 1.6 more than 15.0 14.0 9.0 0.6 0.6 3.5 FMC0H104ZF FMC0H104ZFTP( ) 5.5 0.10 0.13 less than FMC0H334ZF FMC0H334ZFTP( ) 5.5 - 0.33 less than 50 25 0.15 less than 0.50 4.2V Chip parts applicable to treatment in bond hardening furnace (160 5C for 120 10 seconds) Note: To complete part number, insert lead length H. (16 or 18 mm: Refer to Taping Specification on page 26 or 27.) 24 Super Capacitors Vol.07 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Specifications: FM Series FMC Type Specifications Item Operating Temperature Range Maximum Operating Voltage Nominal Capacitance Range Capacitance Allowance Equivalent Series Resistance Current (30-minutes value) -25C to +70C 5.5 VDC Refer to standard ratings +80%, -20% Refer to standard ratings Refer to standard ratings Capacitance More than 90% of initial requirement Equivalent series resistance Not to exceed 120% of initial requirement Current (30-minute value) Not to exceed 120% of initial requirement Surge Voltage Phase 2 Temperature Variation of Characteristics Phase 5 Phase 6 Appearance No obvious abnormality. Capacitance Equivalent series resistance Capacitance Equivalent series resistance Current (30-minute value) Capacitance Equivalent series resistance Current (30-minute value) 50% or higher of initial value 4 or less times initial value 200% or below of initial value Satisfy initial standard value 1.5 CV (mA) or below Within 20% of initial value Satisfy initial standard value Satisfy initial standard value Lead Strengh (Tenile) No loosening nor permanent damage of the leads Vibration Resistance Capacitance Equivalent series resistance Current (30-minute value) Appearance Solderability Soldering Heat Resistance Temperature Cycle Humidity Resistance High Temperature Load Voltage Holding Characteristics (Self Dischage) Satisfy initial standard value Refer to characteristics measuring method. Refer to characteristics measuring method. Refer to characteristics measuring method. Conforms to 7.14 Surge Voltage: 6.3 V Temperature: 70 2C Chargs: 30 sec. Dischargs: 9 min. 30 sec. Number of cycles 1000 cycles. Series resistance: 0.047 F: 300 0.1 F: 150 0.33 F: 51 Discharge resistance: 0 Conforms to 7.12 Phase 1: +25 2C Phase 2: -25 2C Phase 4: +25 2C Phase 5: +70 2C Phase 6: +25 2C Conforms to 8.1.2 (1) 1 kg 10 sec Conforms to 8.2.3 Frequency: 10 to 55 Hz Test duration: 6 hours There should be no considerable abnormality 3/4 or more of the pin surface should be covered with new solder Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Capacitance Equivalent series resistance Current (30-minute value) Appearance Test Conditions Conforming to JIS C 5102-1994 Satisfy initial standard value No obvious abnormality Satisfy initial standard value No obvious abnormality Within 20% of initial value 1.2 or less times initial standard value 1.2 or less times initial standard value No obvious abnormality Within 30% of initial value Twice or less times initial standard value Twice or less times initial standard value No obvious abnormality Conforms to 8.4 Solder temperature: 245 5C Dipping duration: 5 0.5 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 8.5 Solder temperature: 260 10C Dipping duration: 10 1 sec. Dipped up to 1.6 mm from the lower end of the capacitor. Conforms to 9.3 Temperature condition: -25C normal temperature +70C normal temperature Number of cycles: 5 cycles Conforms to 9.5 Temperature: 40 2C Relative humidity: 90 to 95% RH Test duration: 240 8 hours Conforms to 9.10 Temperature: 70 2C Voltage applied: 5.5 Vdc Series protection resistance: 0 Test duration: 1000 +48 0 hours Charging condition Voltage applied: 5.0 VDC Series resistance: 0 Charging time: 24hours Storage Time: 24hours Temperature:Lower than 25C Humidity:Lower than 70%RH Voltage between terminal leads higher then 4.2V Super Capacitors Vol.07 25 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Taping Specification (except FMC0H334ZFTP( )) P2 P h b a c - F + W4 t3 W0 W1 L H P1 + W2 - W t2 P0 D0 t1 Unit : mm Symbol Value Tolerance Component Height Item a 11.5 0.5 Component Width b 10.5 0.5 Component Thickness C - 0.5 Lead-wire Width W4 0.5 0.1 Lead-wire Thickness t3 t3 0.4 0.1 Pitch of Component P 12.7 1.0 Sprocket Pitch P0 12.7 0.3 Sprocket Hole Center to Lead P1 3.85 0.7 Sprocket Hole to Component Center P2 6.35 1.3 Lead Spacing F 5.0 0.5 Component Alignment h 2.0 Max. - Tape Width W 18.0 +1.0 - 0.5 Hold-down tape Width W0 12.5 Min. - Sprocket Hole Position W1 9.0 0.5 Hold-down Tape Position W2 3.0 Max. - 16.0 0.5 Height of Component from Tape Center H Sprocket Hole Diameter D0 Total Tape Thickness Length of Shipped Lead 18.0 0.5 4.0 0.2 t1 0.7 0.2 t2 1.5 Max. - L 11.0 Max. - Remarks 5.5 V Type: 5.0/0.010 F~0.047 F, 6.5/0.047 F 3.5 V Type: 5.0/0.047 F~0.10 F, 6.5/0.22 F FME Type: 5.0/0.022 F~0.047 F 6.5 Type: 6.5/0.047 F FMR Type: 6.5/0.047 F FMC Type: 5.0/0.047 F, 6.5/0.10 F Including tiltiing caused by bending of lead wire No protrusion of tape Packing Quantity 1000 pcs. / box 26 Super Capacitors Vol.07 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E Taping Specifications [FMC0H334ZFTP( )] P2 P h b a c + - F W4 t3 W W0 W1 L H P1 + W2 - P0 D0 t2 t1 Unit : mm Item Symbol Value Tolerance Component Height a 15.0 0.5 Component Width b 14.0 0.5 Component Thickness c 9.0 0.5 W4 0.6 0.1 Lead-wire Width Lead-wire Thickness t3 0.6 0.1 Pitch of Component P 25.4 1.0 Sprocket Pitch P0 12.7 0.3 Sprocket Hole Center to Lead P1 3.85 0.7 Sprocket Hole to Component Center P2 6.35 1.3 Lead Spacing F 5.0 0.5 Component Alignment h 2.0 Max. - Tape Width W 18.0 +1.0 - 0.5 Hold-down tape Width W0 12.5 Min. - Sprocket Hole Position W1 9.0 0.5 Hold-down Tape Position W2 3.0 Max. - 16.0 0.5 Height of Component from Tape Center H Sprocket Hole Diameter D0 Total tape thickness Length of Shipped Lead 18.0 0.5 4.0 0.2 t1 0.67 0.2 t2 1.7 Max. - L 11.0 Max. - Remarks Including tiltiing caused by bending of lead wire No protrusion of tape Packing Quantity 400 pcs. / box Super Capacitors Vol.07 27 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 2007.08.03 P0862SUCA16VOL07E