STM32303E-EVAL Evaluation board for STM32F301/302/303 lines - with STM32F303VE MCU Data brief 1. Picture not contractual Features STM32F303VET6 microcontroller Four 5 V power supply options: Power jack ST-LINK/V2 USB connector User USB connector Daughter board October 2014 2 I S Audio DAC, stereo audio jack which supports headset with microphone 2-GByte (or more) MicroSD card on SPI 2 I C compatible serial interface temperature sensor, EEPROM and RF EEPROM RS-232 communication IrDA transceiver JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded 1-Mbit SPI serial Flash memory 240x320 TFT color LCD connected to the SPI interface Joystick with 4-direction control and selector Reset, Tamper or Key button 4-color user LEDs and high brightness LED Humidity sensor Extension connectors for daughter board or wrapping board MCU voltage: 3.3 V or adjustable 2.0 V - 3.6 V USB FS connector Touch-sensing buttons RTC with backup battery CAN2.0A/B compliant connection Light-dependent resistor (LDR) IR receiver Potentiometer 2 motor control connectors DocID026778 Rev 1 For further information contact your local STMicroelectronics sales office. 1/5 www.st.com Description 1 STM32303E-EVAL Description The STM32303E-EVAL evaluation board has been designed as a complete demonstration (R) (R) and development platform for the ARM cortex -M4 core-based STM32F303VET6 2 microcontroller. It features two I Cs, three SPIs, five USARTs, one CAN, four 12-bit ADCs, two 12-bit DACs, internal 64 KByte Data SRAM, 16 KByte Program SRAM and 512 KByte Flash, touch sensing, USB FS, JTAG debugging support. This evaluation board can be used as the reference design for user application development but it is not considered as a final application. The full range of hardware features on the board can be used to evaluate all peripherals (USB FS, USART, Audio DAC and ADC, TFT color LCD, IrDA, LDR, MicroSD card, motor control connectors, humidity sensor, high brightness LED, CAN, IR receiver, EEPROM, touch sensing buttons & temperature sensor, etc.) and develop your own applications. Extension headers make it possible to easily connect a daughter board or wrapping board for your specific application. An ST-LINK/V2 is integrated on the board as an embedded in-circuit debugger and programmer for the STM32 MCU. The STM32303E-EVAL evaluation board does not support STM32F3x8 MCUs line (1.65 V to 1.95 V power supply). 2/5 DocID026778 Rev 1 STM32303E-EVAL 2 Ordering information Ordering information To order the evaluation board for STM32F301/302/303 microcontrollers lines, use the order code: STM32303E-EVAL. DocID026778 Rev 1 3/5 Revision history 3 STM32303E-EVAL Revision history Table 1: Document revision history 4/5 Date Revision 27-Oct-2014 1 Changes Initial release. DocID026778 Rev 1 STM32303E-EVAL IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2014 STMicroelectronics - All rights reserved DocID026778 Rev 1 5/5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STM32303E-EVAL