http://www.tracopower.com Page 1 of 3
DC/DC Converters
THL 3WI(SM) Series, 3 Watt
Features
◆ Compact design in SMD or DIP package
◆ Ultra wide 4:1 input voltage range
◆ Fully regulated outputs
◆ I/O isolation 1500 VDC
◆ SMD version qualfied for leadfree re
flow solder process, MSL 2a
◆ Operating temp. range –40°C to +85°C
◆ Short circuit protection
◆ Remote On/Off control
◆ Input filter to meet EN 55022, class A
without external components
◆ 3-year product warranty
The THL 3WI(SM) series is a family of compact 3 W dc/dc-converters with 4:1 input
voltage ranges. The product is available in SMD- or DIP-package. The internal filter
which meets EN55022 Class A without external components makes the converter
easy to design in.
They come with remote On/Off and short circuit protection. THL 3WI(SM) converter
is an excellent solution for data- and telecom applications and for instrumentation
and Industrial electronics.
Order code
DIP models
Order code
SMD models Input voltage range Output voltage Output current
max. Efficiency typ.
THL 3-2410WI THL 3-2410WISM 3.3 VDC 600 mA 75 %
THL 3-2411WI THL 3-2411WISM 5.0 VDC 600 mA 78 %
THL 3-2412WI THL 3-2412WISM 12 VDC 250 mA 80 %
THL 3-2413WI THL 3-2413WISM 9 – 36 VDC 15 VDC 200 mA 80 %
THL 3-2415WI THL 3-2415WISM (24 VDC nominal) 24 VDC 125 mA 80 %
THL 3-2421WI THL 3-2421WISM ±5 VDC ±300 mA 77 %
THL 3-2422WI THL 3-2422WISM ±12 VDC ±125 mA 80 %
THL 3-2423WI THL 3-2423WISM ±15 VDC ±100 mA 80 %
THL 3-4810WI THL 3-4810WISM 3.3 VDC 600 mA 75 %
THL 3-4811WI THL 3-4811WISM 5.0 VDC 600 mA 78 %
THL 3-4812WI THL 3-4812WISM 12 VDC 250 mA 80 %
THL 3-4813WI THL 3-4813WISM 18 – 75 VDC 15 VDC 200 mA 80 %
THL 3-4815WI THL 3-4815WISM (48 VDC nominal) 24 VDC 125 mA 80 %
THL 3-4821WI THL 3-4821WISM ±5 VDC ±300 mA 77 %
THL 3-4822WI THL 3-4822WISM ±12 VDC ±125 mA 80 %
THL 3-4823WI THL 3-4823WISM ±15 VDC ±100 mA 80 %
Models
C
B
Scheme
IEC 60950-1
226037
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
THL 3WI(SM) Series 3 Watt
Input Specifications
Input current at no load (nominal input voltage) 24 Vin models: 30 mA typ.
48 Vin models: 20 mA typ.
Input current at full load (nominal input voltage) 24 Vin; 3.3 VDC model: 110 mA typ.
24 Vin other models: 160 mA typ.
48 Vin; 3.3 VDC model: 55 mA typ.
48 Vin other models: 80 mA typ.
Surge voltage (1 sec. max.) 24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise EN 55022 level A, FCC part 15, level A without
external components
Recommended input fuse (slow blow) 24 V models: 1500 mA
48 V models: 800 mA
Output Specifications
Voltage set accuracy ±2 % max
Regulation – Input variation Vin min. to Vin max. 1.0 % max.
– Load variation 15 – 100 % 1.0 % max.
Minimum load 15 % of rated max current (operation at lower
load condition is safe but a higher output ripple
will be experienced)
Temperature coefficient ±0.02 %/K
Ripple and noise (20 MHz bandwidth) 50 mVp-p max.
Transient response (25 % load step change)
– Recovery time 300 µs typ.
– Deviation ±3 %
Short circuit protection indefinite, automatic recovery
Capacitive load 3.3 & 5 VDC models: 220 µF max.
all other models: 47 µF max.
General Specifications
Temperature – Operating (natural convection cooling 20 LFM) –40°C to +85°C
– Storage –40°C to +125°C
– Case +105°C max.
Load derating (natural convection cooling 20 LFM) DIP models: 2.5 %/K above +65°C
SMD 3.3 & 5.0 VDC models: 2.2 %/K above +55°C
SMD other models: 2.5 %/K above +60°C
Humidity (non condensing) 95 % rel. H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >300‘000 h
Isolation voltage (60 sec.) – Input/Output 1’500 VDC
Isolation capacitance – Input/Output 500 pF max.
Isolation resistance – Input/Output (500 VDC) >1 GOhm
Safety standard (designed to meet) IEC 60950-1, UL 60950-1
– Certification documents www.tracopower.com/overview/thl3wism
Switching frequency 350 kHz
Altitude during operation 5‘000 m max. (16‘40 0 f t ) approved
Remote On/Off – On: 2.5 to 5.5 VDC or open circuit
– Off: –0.7 to 0.8 VDC
– Off stand by input current 5 mA max.
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Page 3 of 3
Rev. July 11, 2018
Outline Dimensions mm (inches)
DC/DC Converters
THL 3WI(SM) Series 3 Watt
Outline Dimensions
Pin Single Dual
1–Vin (GND) –Vin (GND)
2Remote On/Off Remote On/Off
7ntc. ntc.
8ntc. Common
9+Vout +Vout
10 –Vout –Vout
16 +Vin (Vcc) +Vin (Vcc)
Pin-Out
Dimensions in [mm], () = Inch
Tolerances: ±0.25 (±0.01)
Pin pich tolerances: ±0.13 (±0.005)
Pysical Specifications
Casing material non-conductive plastic (UL94V-0 rated)
Pin material DIP models: Phosphor bronze
SMD models: Copper alloy with gold plated nickel subplate
Package weight DIP models: 5.4 g ( 0.19 oz )
SMD models: 4.2 g ( 0.14 oz)
Soldering profile for DIP-package models max. 265°C / 10 sec. (wave soldering)
Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
DIP-Models
SMD-Models
ntc. = not to connect
2.54 2.54
3.0
1.77 10.16
13.74.1
0.5
8.0
23.8
12.70
(0.1)(0.1)
(0.5)
(0.94)
(0.4)
(0.07)
(0.54)
(0.12)
(0.16)
(0.02)
(0.31)
1
2
7
8
16
10
9
bottom view
0.5
(0.02)
24.0
(0.94)
0.25
(0.01)
8.0
(0.31)
18.1
(0.71)
13.7
(0.54)
12.70
(0.50)
2.54
(0.10)
3.11
(0.12)
top view
178
16 10 9
1.0
(0.04)
2
2.54
(0.10)
11.6
(0.45)
5.46
(0.22)
Ø1.5
(Ø 0.06) vent hole with membrane on bottom side
(to allow proper washing process)
Supporting documents: www.tracopower.com/overview/thl3wi
www.tracopower.com/overview/thl3wism
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TRACO Power:
THL 3-2411WI THL 3-2412WI THL 3-4812WI THL 3-4811WI THL 3-2423WI THL 3-4810WI THL 3-2415WI THL 3-
4813WI THL 3-4815WI THL 3-4821WI THL 3-2413WI THL 3-4822WI THL 3-2422WI THL 3-2410WI THL 3-4823WI
THL 3-2421WI
