https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page1/11
Bus coupler-AXL F BK ETH-2688459
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
AxiolineF, Bus coupler, Modbus/TCP(UDP), RJ45 jack, transmission speed in the local bus:100 Mbps, degree of
protection:IP20, including bus base module and AxiolineF connector
Product Description
The bus coupler is intended for use within a Modbus/TCP(UDP) network.
The bus coupler creates the link to the AxiolineF I/O system and the industrial I/O signals connected to it.
Up to 63 AxiolineF devices can be connected to the bus coupler.
Your advantages
2 Ethernet ports (with integrated switch)
Transmission speed of 10 Mbps and 100 Mbps
Rotary coding switches for setting the IP address assignment and other functions
Firmware can be updated
Runtime in the bus coupler is negligible (almost 0µs) (for Modbus/UDP)
Typical cycle time of the AxiolineF local bus is around 10μs
Web-based management
Supports the operation of Axioline Smart Elements
Supports the AXLSESC slot cover (firmware version 1.30 and later)
Supports IOL-CONF (firmware version 1.30 and later)
Supports Diag+
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356710770
Weight per Piece (excluding packing) 220.000 g
Custom tariff number 85176200
https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page2/11
Bus coupler-AXL F BK ETH-2688459
Country of origin Germany
Technical data
Dimensions
Width 45 mm
Height 126.1 mm
Depth 74 mm
Note on dimensions The depth is valid when a TH35-7,5 DIN rail is used (according to
EN60715).
Ambient conditions
Ambient temperature (operation) -25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail)
-25 °C ... 55 °C (Mounting position: any)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000m above sea level)
Degree of protection IP20
Connection data
Designation AxiolineF connector
Connection method Push-in connection
Note on the connection method Please observe the information provided on conductor cross sections in
the “AxiolineF: system and installation” user manual.
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 16
Stripping length 8 mm
General
Mounting type DIN rail mounting
Color traffic grey A RAL 7042
Net weight 177 g
Note on weight specifications with connector and bus base module
Degree of pollution 2 (IEC60664-1, EN60664-1)
Mounting type DIN rail mounting
Mounting position any (observe temperature derating)
https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page3/11
Bus coupler-AXL F BK ETH-2688459
Technical data
Interfaces
Designation Modbus/TCP (UDP)
Number of interfaces 2
Connection method RJ45 jack
Note on the connection method Auto negotiation and autocrossing
Transmission speed 10/100 Mbps (Half or full duplex mode (automatic detection, can be
adjusted manually))
Transmission physics Ethernet in RJ45 twisted pair
Designation AxiolineFlocal bus
Number of interfaces 1
Connection method Bus base module
Transmission speed 100 Mbps
Designation Service
Number of interfaces 1
Connection method USB type C (as of HW 05)
Micro USB type B (up to HW 04)
Network/bus system
Number of supported devices max. 63 (per station)
Number of local bus devices that can be connected max. 63
Protocol Modbus/TCP (UDP)
SNMP
HTTP
TFTP
FTP
BootP
DHCP
DCP
Axioline potentials
Designation Communications power UL feed-in (the supply of the AxiolineF local bus
UBus is generated from UL)
Supply voltage 24 VDC
Supply voltage range 19.2 VDC ... 30 VDC (including all tolerances, including ripple)
Current consumption max. 583 mA (2.0A at UBus, UL=24V, up to HW04)
max. 670 mA (2.5A at UBus, UL=24V, HW05 or later)
Power consumption max. 14 W (2.0A at UBus, UL=24V, up to HW04)
max. 16 W (2.5A at UBus, UL=24V, HW05 or later)
Type of protection Surge protection
Reverse polarity protection
https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page4/11
Bus coupler-AXL F BK ETH-2688459
Technical data
Axioline potentials
Designation AxiolineF local bus supply (UBus)
Supply voltage 5 VDC (via bus base module)
Power supply unit max. 2 A (up to HW 04)
max. 2.5 A (as of HW 05)
Electrical isolation
Test section Ethernet interface 1 / Ethernet interface 2 1500 VAC 50 Hz 1 min.
Ethernet interface 1 / 24 V communications voltage (UL) feed-in 1500 VAC
50 Hz 1 min.
Ethernet interface 2 / 24 V communications voltage (UL) feed-in 1500 VAC
50 Hz 1 min.
Ethernet interface 1 / functional ground 1500 VAC 50 Hz 1 min.
Ethernet interface 2 / functional ground 1500 VAC 50 Hz 1 min.
24 V communications voltage (UL) feed-in / functional ground 500 VAC 50
Hz 1 min.
Standards and Regulations
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic
discharge (ESD) EN61000-4-2/IEC61000-4-2 Criterion B, 6 kV contact
discharge, 8 kV air discharge
Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic
fields EN61000-4-3/IEC61000-4-3 Criterion A, Field intensity: 10 V/m
Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients
(burst) EN61000-4-4/IEC61000-4-4 Criterion B, 2kV
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient
overvoltage (surge) EN61000-4-5/IEC61000-4-5 Criterion B, DC supply
lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), fieldbus cable shield:
±1 kV
Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted
interference EN61000-4-6/IEC61000-4-6 Criterion A, Test voltage 10 V
Interference emission Noise emission test according to EN 61000-6-3 Class B
Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g
Shock in acc. with EN60068-2-27/IEC60068-2-27 30g
Continuous shock according to EN60068-2-27/IEC60068-2-27 10g
Protection class III (IEC61140, EN61140, VDE0140-1)
Overvoltage category II (IEC60664-1, EN60664-1)
Drawings
https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page5/11
Bus coupler-AXL F BK ETH-2688459
Block diagram
UL
C
RJ45
RJ45
24 V
3.3 V
UBus
UL
24 V
Reset
Service
FE Ethernet 1
Ethernet 2
UBus
Local bus
LEDs
UL
Internal wiring of the terminal points
Connection diagram
UL
24 V DC
(U )
L
+
-
NET
CO
RDY
D
E
PP
Ethernet
0
2
14
4
6
8
10
12
0
2
4
6
A
B
C
D
E
F
8
9
S1
X10
X1
S2
Ethernet
Dimensional drawing
45 74
126,1
122,4
Classifications
eCl@ss
eCl@ss 10.0.1 27242608
eCl@ss 11.0 27242608
eCl@ss 4.0 27240400
eCl@ss 4.1 27240400
eCl@ss 5.0 27242200
eCl@ss 5.1 27242600
eCl@ss 6.0 27242600
https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page6/11
Bus coupler-AXL F BK ETH-2688459
Classifications
eCl@ss
eCl@ss 7.0 27242608
eCl@ss 9.0 27242608
ETIM
ETIM 3.0 EC001604
ETIM 4.0 EC001604
ETIM 6.0 EC001604
ETIM 7.0 EC001604
UNSPSC
UNSPSC 6.01 43172015
UNSPSC 7.0901 43201404
UNSPSC 11 39121311
UNSPSC 12.01 39121311
UNSPSC 13.2 32151602
UNSPSC 18.0 32151602
UNSPSC 19.0 32151602
UNSPSC 20.0 32151602
UNSPSC 21.0 32151602
Approvals
Approvals
Approvals
PRS / BV / LR / KR / NK / ABS / BSH / RINA / KC / EAC / DNV GL / UL Listed / cUL Listed / UL Listed / cUL Listed
Ex Approvals
Approval details
PRS http://www.prs.pl/ TE/1117/880590/20
https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page7/11
Bus coupler-AXL F BK ETH-2688459
Approvals
BV http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials 36433/B2 BV
LR http://www.lr.org/en LR2001902TA
KR http://www.krs.co.kr/eng/main/main.aspx HMB17372-AC002
NK http://www.classnk.or.jp/hp/en/ 14A006
ABS http://www.eagle.org/eagleExternalPortalWEB/ 20-2059154-PDA
BSH 840
RINA http://www.rina.org/en ELE030120XG
KC http://eng.kcc.go.kr/user/ehpMain.do MSIP-REI-
PCK-2688459
EAC EAC-Zulassung
DNV GL https://approvalfinder.dnvgl.com/ TAA00000DF
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page8/11
Bus coupler-AXL F BK ETH-2688459
Approvals
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705
Accessories
Accessories
Data cable by the meter
Network cable-FL CAT5 HEAVY-2744814
CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installation cable, 2 x 2 x 0.22 mm², solid conductor,
shielded, outer sheath: 7.8 mm diameter, inner sheath: 5.75 mm ± 0.15 mm diameter
Installation cable-FL CAT5 FLEX-2744830
By the meter, Installation cable, Ethernet CAT5 (100 Mbps), shielded, PUR halogen-free, water blue RAL5021, 4-wire
(2x2xAWG26/7; SF/UTP), color single wire: white/orange-orange, white/green-green, cable length: Free entry (1.0 ...
1000.0 m)
Data plug
Assembly tool-FL CRIMPTOOL-2744869
Crimping pliers, for assembling the RJ45 plugs FL PLUG RJ45..., for assembly on site
https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page9/11
Bus coupler-AXL F BK ETH-2688459
Accessories
Device marking
Insert label-EMT (35X18,7)R-0801831
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: snapped into marker
carrier, lettering field size: 35 x 18.7 mm, Number of individual labels: 500
DIN rail connector
Bus connector-AXL BS BK-2701422
Axioline F bus base module for housing type BK
Plug
RJ45 connector-FL PLUG RJ45 GR/2-2744856
RJ45 connector, shielded, with bend protection sleeve, 2 pieces, gray for straight cables, for assembly on site. For
connections that are not crossed, it is recommended that you use the connector set with gray bend protection sleeve.
RJ45 connector-FL PLUG RJ45 GN/2-2744571
RJ45 connector, shielded, with bend protection sleeve, 2 pieces, green for crossed cables, for assembly on site. For
connections that are crossed, it is recommended that the connector set with green bend protection sleeves is used.
Programming cable
https://www.phoenixcontact.com/us/products/2688459
04/21/2021Page10/11
Bus coupler-AXL F BK ETH-2688459
Accessories
Connecting cable-CAB-USB A/ USB C/1,8M-2404677
Connecting cable, for connecting the controller to a PC from USB A to USB C
Connecting cable-CAB-USB C/ USB C/1,8M-1021809
Connecting cable, for connecting the controller to a PC from USB C to USB C
Connecting cable-CAB-USB A/MICRO USB B/2,0M-2701626
Connecting cable, for connecting the controller to a PC for PC Worx and LOGIC+, USB A to micro USB B, 2 m in length.
Terminal marking
Zack marker strip-ZB 20,3 AXL UNPRINTED-0829579
Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, unprinted, 25-section, for individual labeling with
B-STIFT 0.8, X-PEN, or CMS-P1-PLOTTER
Zack Marker strip, flat-ZBF 10/5,8 AXL UNPRINTED-0829580
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 10.15 mm, lettering field size: 4 of 10.15 x 5 mm and 1 of 5.8 x 5
mm, Number of individual labels: 50
