MEA/MEK/MEE 300-06DA VRRM = 600 V IFAVM = 304 A trr = 250 ns FRED Module Fast Recovery Epitaxial Diode Part number MEA 300-06DA MEK 300-06DA MEE 300-06DA E72873 Backside: isolated Common Anode 1 2 Common Cathode 3 1 MEA 300-06DA Features / Advantages: International standard package with DCB ceramic base plate Planar passivated chips Short recovery time Low switching losses Soft recovery behaviour High reliability circuit operation Low voltage peaks for reduced protection circuits Low noise switching Low losses 2 Phase-Leg 1 3 MEK 300-06DA Applications: Antiparallel diode for high frequency switching devices Free wheeling diode in converters and motor control circuits Inductive heating and melting Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders 2 3 MEE 300-06DA Package: Y4-M6 Isolation voltage: 3600 V~ Industry standard outline Soldering pins for PCB mounting Base plate: DCB ceramic Reduced weight Advanced power cycling Disclaimer Notice Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. IXYS reserves the right to change limits, test conditions and dimensions (c) 2020 IXYS All rights reserved 20201001a 1-5 MEA/MEK/MEE 300-06DA Diode Ratings Symbol Definitions VRSM max. non-repetitive reverse TVJ = 25C 600 V VRRM max. repetitive reverse TVJ = 25C 600 V IR reverse current VR = VRRM VR = 0.8*VRRM VR = 0.8*VRRM TVJ = 25C TVJ = 25C TVJ = 125C 12 3 80 mA mA mA VF forward voltage IF = 300 A TVJ = 25C TVJ = 125C 1.27 1.05 V V IF = 520 A TVJ = 25C TVJ = 125C 1.36 1.19 V V TC = 75C 430 A TC = 75C rectangular, d = 0.5 TVJ = 150C 304 A for power-loss calculations only TVJ = TVJM 0.85 1.34 V m 0.143 K/W K/W TVJ = 25C 875 W IFRMS RMS forward current IFAV average forward current VT0 rT threshold voltage slope resistance RthJC RthCH thermal resistance junction to case thermal resistance junction to heatsink Ptot total power dissipation IFSM max. surge forward current I2t I2t value for fusing Conditions min. typ. max. 0.085 t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine TVJ = 45C 2.40 2.64 kA kA t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine TVJ = 150C 2.16 2.38 kA kA t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine TVJ = 45C 28.8 29.3 kA2s kA2s t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine TVJ = 150C 23.3 23.8 kA2s kA2s 140 250 170 300 ns ns 35 55 45 70 A A trr max. reverse recovery current IF = 300 A; -diF/dt = 400 A/s IRM reverse recovery time VR = 300 V; L 0.05 H TVJ = 25C TVJ = 100C TVJ = 25C TVJ = 100C IFAVM rating includes reverse blocking losses at TVJM, VR = 0.8 VRRM, duty cycle d = 0.5 IXYS reserves the right to change limits, test conditions and dimensions (c) 2020 IXYS All rights reserved 20201001a 2-5 MEA/MEK/MEE 300-06DA Package Y4-M6 Ratings Symbol Definitions Conditions IRMS RMS current per terminal TVJ Top Tstg virtual junction temperature operation temperature storage temperature min. typ. -40 -40 -40 Weight max. 300 A 150 125 125 C C C 126 MD mounting torque MT terminal torque dSpp/App dSpb/Apb creepage distance on surface | striking distance through air VISOL isolation voltage Date Code (DC) + Production Index (PI) t = 1 second t = 1 minute terminal to terminal terminal to backside 50/60 Hz, RMS; IISOL < 1 mA 14.0 16.0 g 2.25 2.75 Nm 4.5 5.5 Nm 10.0 16.0 mm mm 3600 3000 V V Circuit yywwAA Part Number Lot.No: xxxxxx Data Matrix: part no. (1-19), DC + PI (20-25), lot.no.# (26-31), blank (32), serial no.# (33-36) Ordering Part Name Marking on Product Standard MEA 300-06DA MEA 300-06DA Box 36 464686 Standard MEK 300-06DA MEK 300-06DA Box 36 464619 Standard MEE 300-06DA MEE 300-06DA Box 36 464708 IXYS reserves the right to change limits, test conditions and dimensions (c) 2020 IXYS All rights reserved Delivering Mode Base Qty Ordering Code 20201001a 3-5 MEA/MEK/MEE 300-06DA Outlines Y4-M6 M6 p a Dim. min [mm] max [mm] min [inch] max [inch] a 30.0 30.6 1.181 1.205 b c A h i 2 3 7 1 6 10 11 o k typ. 0.25 typ. 0.010 c 64.0 65.0 2.520 2.559 d 6.5 7.0 0.256 0.275 e 4.9 5.1 0.193 0.201 h 93.5 94.5 3.681 3.720 i 79.5 80.5 3.130 3.169 k 33.4 34.0 1.315 1.339 l 16.7 17.3 0.657 0.681 m 22.7 23.3 0.894 0.917 n 22.7 23.3 0.894 0.917 o 14.0 15.0 0.551 0.591 p typ. 10.5 typ. 0.413 n A (3:1) m 4 8 9 5 B B l B-B (1:1) b e DCB n Common Anode 1 2 d Common Cathode 3 MEA 300-06DA 1 2 MEK 300-06DA IXYS reserves the right to change limits, test conditions and dimensions (c) 2020 IXYS All rights reserved 3 Phase-Leg 1 2 3 MEE 300-06DA 20201001a 4-5 MEA/MEK/MEE 300-06DA Curves 500 20 200 TVJ = 100C VR = 300 V TVJ = 100C VR = 300 V 400 15 150 IF Qr 300 [A] 10 200 IRM IF = 600 A 300 A 150 A 100 [C] TVJ = 125C 25C IF = 600 A 300 A 150 A [A] 5 50 100 0 0.0 0.4 0.8 1.2 0 1 00 1.6 0 1000 0 200 400 600 800 1000 VF [V] -diF / dt [A/s] -diF / dt [A/s] Fig. 1 Typ. forward current IF versus max. voltage drop VF per leg Fig. 2 Typ. reverse recovery charge Qr versus -diF /dt Fig. 3 Typ. peak reverse current IRM versus -diF /dt 1.4 400 60 1.2 3.0 TVJ = 100C IF = 300 A TVJ = 100C VR = 300 V 50 2.5 40 2.0 30 1.5 20 1.0 350 1.0 trr IF = 600 A 300 A 150 A 300 Kf [ns] 0.8 IRM tfr VFR [s] [V] 250 0.6 10 Qr 0.4 200 0 40 80 120 160 trr VFR 0 0 200 400 600 800 1000 0.0 0 200 -diF /dt [A/s] TVJ [C] Fig. 4 Typ. dynamic parameters Qr, IRM versus junction temperature TVJ 0.5 400 600 800 1000 -diF /dt [A/s] Fig. 5 Typ. recovery time trr versus -diF / dt Fig. 6 Typ. peak forward voltage VFR and trr versus -diF / dt 0.25 0.20 0.15 Constants for ZthJS calculation: ZthJS 0.10 [K/W] 0.05 0.00 0.001 0.01 0.1 1 i Rthi [K/W] 1 2 3 4 0.002 0.008 0.054 0.164 ti [s] 0.080 0.024 0.112 0.464 10 t [s] Fig. 7 Typ. transient thermal impedance junction to heatsink IXYS reserves the right to change limits, test conditions and dimensions (c) 2020 IXYS All rights reserved 20201001a 5-5