Product Description:
The HT23-598 two-phase stepper motor is designed for use with DC powered drives like the ST5 and STR4
stepper drives, and is suitable for a wide range of motion control applications. The motor comes with an integral 10
ft shielded cable and is terminated with 8 motor leads plus 1 ground lead.
Available Part Numbers
Part No. Details
HT23-598C Base, single shaft motor.
HT23-598DC Double shaft motor.
HT23-598DC-ZAA
Motor with ZAA type optical encoder mounted to rear shaft and end bell of motor.
Recommended for use with Applied Motion stepper drives to perform Stall Detection and
Stall Prevention functions. 2,000 CPR (8,000 counts quadrature); A, B, and Z (index)
channels; differential, line driver outputs.
Mating cable for use with Applied Motion drives (D-sub connector): 3004-195-10
Mating cable with flying leads: 3004-257
HT23-598DC-ZAC
Motor with ZAA type optical encoder (see above) mounted to rear shaft and end bell of
motor.
A metal cover with integral shielded cable is mounted over the encoder to protect the
encoder from dust and debris.
HT23-598DC-CAA
Motor with CAA type capacitive encoder mounted to rear shaft and end bell of motor.
Recommended for use with Applied Motion stepper drives to perform Stall Detection and
Stall Prevention functions. 2,000 CPR (8,000 counts quadrature); A, B, and Z (index)
channels; differential, line driver outputs.
Mating cable for use with Applied Motion drives (D-sub connector): 3004-329-10
Mating cable with flying leads: 3004-349-03
Description