TL50GRAQ - BANNER ENGINEERING

TL50 Tower Light

Multi-Color General-Purpose or Audible Indicators

Features

•Rugged, cost-effective and easy-to-install m ultisegment

indicators

•Illuminated segments provide easy-to-see operator

guidance and indication of equipment status

•Displays up to 5 colors

•Optional audible function with variable intensity

•Compact devices are completely self-contained — no

controller needed

•Immune to EMI and RFI interference

•18 to 30V dc or 24V ac operation

•No assembly required

Multi-Color General-Purpose Models

InputsLED Function**Connection*

Color

Count

Model

Bimodal (NPN or

PNP)

1 Color: Red

4-pin Euro integral QD

connector

1TL50RQ

2 Color: Green, Red2TL50GRQ

3 Color: Green, Yellow, Red3TL50GYRQ

4 Color: Blue, Green, Yellow, Red

5-pin Euro integral QD

connector

4TL50BGYRQ

5 Color:White, Blue, Green,

Yellow, Red

8-pin Euro integral QD

connector

5TL50WBGYRQ

Multi-Color Audible Models

InputsLED Function**Connection*

Color

Count

Model

Bimodal (NPN or

PNP)

1 Color: Red

4-pin Euro integral QD

connector

1TL50RAQ

2 Color: Green, Red2TL50GRAQ

3 Color: Green, Yellow, Red

5-pin Euro integral QD

connector

3TL50GYRAQ

0 142406 5

9/2009P/N 142406 rev. D

InputsLED Function**Connection*

Color

Count

Model

4 Color: Blue, Green, Yellow, Red

8-pin Euro integral QD

connector

4TL50BGYRAQ

* Integral QD models are listed.

•For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, TL50GYRQP).

•For 2 m (6.5’) cable, omit suffix Q from model number (example, TL50GYR).

•A model with a QD requires a mating cable (see Quick-Disconnect (QD) Cordsets)

** The first color listed is the bottom color, going up in successive order. Contact factory for other colors and color

combinations.

Specifications

DescriptionFeature

18 to 30V dc (10% max. ripple); or 21 to 27V ac

Supply Voltage and

Current •Indicators: @ 45 mA max. current per LED color

•Audible Alarm: 25 mA max. current

LEDs are independently selected: Green, Red, Yellow, Blue or White; 1-5 colors

depending on model

Indicators

Indicator ON/OFF: 10 ms (max.)Input Response Time

Ocillation Frequency: 2.7 kHz ± 500 Hz

Audible Alarm

Max. Intensity (typical): 95 db @ 1 meter

The audible intensity can be adjusted by unscrewing the cover.The cover should not

be unscrewed more than one and a half turns or it may detach during operation. For

max. intensity, remove the center plug by rotating it 180° counterclockwise.

Audible Adjustments

Bases and Covers: ABS

Construction

Light Segment: Polycarbonate

General-Purpose: IEC IP67

Environmental Rating

Audible: IEC IP50

Integral 4-pin, 5-pin or 8-pin Euro-style QD, 150 mm PVC pigtail with QD, or 2 m (6.5’)

integral cable, depending on model

Connections

General-Purpose: −40° to +50° C (−40° to +122° F)

Operating Conditions

Audible: −20° to +50° C (−4° to +122° F)

Certifications

P/N 142406 rev. DBanner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com

Tel: 763.544.3164

142406

Dimensions

M30x1

(mounting nut

included)

Internal Threads

1/2–14 NPSM

Max Torque 2.25 Nm

[20in–lbf]

50.0 [1.97"]

19.0 [0.75"]

8.3 [0.33"]

Tower Height (H)

Multi-Color Audible Models†Multi-Color General-Purpose ModelsColor Count

92.0 mm (3.6")61.2 mm (2.4")1

132.7 mm (5.2")101.9 mm (4.0")2

173.4 mm (6.8")142.6 mm (5.6")3

214.1 mm (8.4")183.3 mm (7.2")4

—224.0 mm (8.8")5

† Tower Height (H) with top unscrewed approximately 3.5 mm to allow sound to escape

Hookups – 4-Pin Models

Wiring KeySinking (NPN) InputSourcing (PNP) Input

1 = Brown

Indicator

Color 3

C2/A

C3/A

18-30V dc

21-27V ac

Indicator

Color 3

C2/A

C3/A

18-30V dc

21-27V ac

2 = White

3 = Blue

4 = Black

Pins 1 and 2 could activate the corresponding color or the audible function, depending on model.

3Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com

Tel: 763.544.3164

P/N 142406 rev. D

142406

Hookups – 5-Pin Models

Wiring KeySinking (NPN) InputSourcing (PNP) Input

1 = Brown

Indicator

Color

C4/A

18-30V dc

21-27V ac

Indicator

Color

C4/A

18-30V dc

21-27V ac

2 = White

3 = Blue

4 = Black

5 = Gray

Pin 5 could activate the corresponding color or the audible function, depending on model.

Hookups – 8-Pin Models

Wiring KeySinking (NPN) InputSourcing (PNP) Input

1 = White

Indicator

Color

C5/A

18-30V dc

21-27V ac

18-30V dc

21-27V ac

Indicator

Color

C5/A

2 = Brown

3 = Green

4 = Yellow

5 = Gray

6 = Pink

7 = Blue

8 = Red

Pin 4 could activate the corresponding color or the audible function, depending on model. Pins 3 and 8 are not

used.

Quick-Disconnect (QD) Cordsets

PinoutDimensionsLengthModelStyle

Female

M12 x 1

ø 15 mm

(0.6")

44 mm max.

(1.7")

2 m (6.5')

5 m (15')

9 m (30')

MQDC-406

MQDC-415

MQDC-430

4-pin Euro-style

straight

4-Pin 4-Wire

1 = Brown

2 = White

3 = Blue

4 = Black

4-Pin Euro

P/N 142406 rev. DBanner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com

Tel: 763.544.3164

142406

PinoutDimensionsLengthModelStyle

1 = Brown

38 mm max.

(1.5")

M12 x 1

ø 15 mm

(0.6")

38 mm max.

(1.5")

2 m (6.5')

5 m (15')

9 m (30')

MQDC-406RA

MQDC-415RA

MQDC-430RA

4-pin Euro-style

Right-angle 2 = White

3 = Blue

4 = Black

Quick-Disconnect (QD) Cordsets

PinoutDimensionsLengthModelStyle

Female

M12 x 1

ø 15 mm

(0.6")

44 mm max.

(1.7")

2 m (6.5')

5 m (15')

9 m (30')

MQDC1-506

MQDC1-515

MQDC1-530

5-pin Euro-style

Straight

1 = Brown

38 mm max.

(1.5")

M12 x 1

ø 15 mm

(0.6")

38 mm max.

(1.5")

2 m (6.5')

5 m (15')

9 m (30')

MQDC1-506RA

MQDC1-515RA

MQDC1-530RA

5-pin Euro-style

Right-Angle

2 = White

3 = Blue

4 = Black

5 = Gray

Quick-Disconnect (QD) Cordsets

PinoutDimensionsLengthModelStyle

Female

M12 x 1

ø 15 mm

(0.6")

44 mm max.

(1.7")

2 m (6.5')

5 m (15')

9 m (30')

MQDC2S-806

MQDC2S-815

MQDC2S-830

8-pin

Euro-Style

straight

1 = White

2 = Brown

3 = Green

4 = Yellow

5 = Gray

6 = Pink

7 = Blue

8 = Red

5Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com

Tel: 763.544.3164

P/N 142406 rev. D

142406

Mounting Brackets

Dimensions (all measurements in mm)FeaturesModel

SMB30A

•Right-angle brac ket with curved slot f or v ersatile

orientation

•Clearance for M6 (¼") hardware

•30 mm mounting hole

•12-ga. stainless steel

Hole center spacing: A to B=40.0

Hole size: A=ø 6.3, B=27.3 x 6.3, C=ø

30.5

SMB30FA

•Swivel bracket with tilt and pan movement for

precision adjustment

•30 mm mounting hole

•12-ga. 304 stainless steel

A=3/8 - 16 x 50.8

Hole size: B=ø 30.1

SMB30MM

•12-ga. stainless steel bracket with curved

mounting slots for versatility and orientation

•Clearance for M6 (¼") hardware

•30 mm mounting hole Hole center spacing: A=51.0, A to

B=25.4

Hole size: A=42.6 x 7.0, B=ø 6.4, C=ø

30.1

SMB30SC

•Swivel bracket with 30 mm mounting hole

•Black reinforced thermoplastic polyester

•Stainless steel mounting and swivel locking

hardware included

P/N 142406 rev. DBanner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com

Tel: 763.544.3164

142406

Dimensions (all measurements in mm)FeaturesModel

Hole center spacing: A to B=50.8

Hole size: A=ø 7.0

SMBAMS30P

•Flat SMBAMS series bracket

•30 mm mounting hole

•Articulation slots for 90+° rotation

•12-ga. 300 series stainless steel

Hole center spacing: A=26.0, A to

B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø

31.0

SMBAMS30RA

•Right-angle SMBAMS series bracket

•30 mm mounting hole

•Articulation slots for 90+° rotation

•12-ga. cold rolled stainless steel Hole center spacing: A=26.0, A to

B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø

31.0

7Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com

Tel: 763.544.3164

P/N 142406 rev. D

142406

Mounting Systems - Elevated Mount

Mounting SystemFeaturesModel

SA-M30TE12

•Streamlined acetal stand-off pipe

adapter/cover

•Connects between TL50 Tower Light

and ½” NPSM/DN15 pipe

•Mounting hardware included

AluminumStainless Steel •Elevated-use stand-off pipe (½”

NPSM/DN15)

SOP-E12-150A

Length: 150 mm

(6")

SOP-E12-150SS

Length: 150 mm

(6")

•Polished 304 stainless steel or

anodized aluminum surface

•½ NPT thread at both ends

•Compatible with most industrial

environments

SOP-E12-300A

Length: 300 mm

(12")

SOP-E12-300SS

Length: 300 mm

(12")

SA-E12M30

•Streamlined acetal mounting base

adapter/cover

•Connects between ½” NPSM/DN15

pipe and 30 mm (1-3/16”) drilled hole

•Mounting hardware included

WARNING . . . Not To Be Used for Personnel Protection

Never use this product as a sensing device for personnel protection. Doing so

could lead to serious injury or death

This product does NO T include the self-checking redundant circuitry necessary to allow its use in personnel saf ety

applications. A sensor f ailure or malfunction can cause either an energized or de-energized sensor output condition.

Consult your Banner Safety Products catalog for safety products that meet OSHA, ANSI and IEC standards for

personnel protection.

W arranty: Banner Engineering Corp. will repair or replace, free of charge , any product

of its manuf acture found to be def ectiv e at the time it is returned to the factory during

the warranty period.This warranty does not co ver damage or liability for the improper

application of Banner products.This warranty is in lieu of any other warranty either

expressed or implied.

142406