LED..A80X80W Series Area Lights
Area Lights with 3-wire cables for use with PresencePLUS
®Pro Sensors
Printed in USA 05/05 P/N 115607 rev. A
�
Features
• Lightly diffused area light for PresencePLUS Pro sensors. See Banner’s website at
www.bannerengineering.com for a complete lighting tutorial.
• Continuous or strobed operation is selectable via sensor software.
• Solid-state LED light source.
• Direct connection to PresencePLUS Pro system or to an external power supply.
• Light level remains constant even when input voltage fluctuates 10% from nominal.
• Two available bracket options.
Light Source LED; see Models table above for wave lengths
Illumination Lightly diffused, high-intensity area light
Infrared model: At a 24" distance, illuminates an 8" diameter area within 60% of the center intensity.
Visible LED models: At a 12" distance, illuminates a 4" diameter area within 50% of the center intensity.
Supply Voltage and Current 24V dc @ 250 mA max.
Voltage supplied by PresencePLUS Pro sensors, if operating at 24V dc (see sensor manual).
Connections 3 conductor, 2 m (6.5') attached cable
Construction Low-carbon steel with black zinc plating, acrylic window
Useful Life 10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30%
after 10,000 hours and less than 40% after 20,000 hours.
Operating Conditions Temperature: 0° to +50° C (+32° to 122° F)
Relative humidity: 90% at 50° C (non-condensing) max.
Cleaning Instructions Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use
any other chemicals for cleaning.
Specifications
Models* LED Color Wave Length
LEDIA80X80W Infrared 850 nm
LEDRA80X80W Visible Red 660 nm
LEDWA80X80W White All Visible
LEDBA80X80W Blue 470 nm
LEDGA80X80W Green 525 nm
Models
* For 9 m (30') cable, add suffix “W/30” to the model number (e.g., LEDBA80X80W W/30).
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • sensors@bannerengineering.com
LED..A80X80W Series Area Lights
P/N 115607 rev. A
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for
one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of
Banner products. This warranty is in lieu of any other warranty either expressed or implied.
�
LED..A80X80W
Wire
PresencePLUS Pro
Controller Terminal Block
External Power Supply
(Strobed)
External Power Supply
(Continuous)
Brown Pin 1, +V (24V dc ±10%) +V +V
Blue Pin 2, -V (dc common) -V -V
Black Pin 4 (strobe) +5V dc OFF
-V ON
-V
Accessory Mounting Brackets
SMBABM
• 13-ga. zinc-plated low-carbon steel
• (4) M4 Phillips flathead screws included
• For mounting light from front
SMBACM
• 14-ga. zinc-plated low-carbon steel
• (4) M4 socket-head cap screws, washers and
hex key included
• For mounting light from rear
Figure 1. Area light dimensions
Wiring Table
