Bond-Ply 800 (R) Thermally Conductive, Fiberglass Reinforced Pressure Sensitive Adhesive Tape Features and Benefits * Thermal impedance: 0.60C-in2/W (@50 psi) * High bond strength to most epoxies and metals * Double-sided, pressure sensitive adhesive tape * High performance, thermally conductive acrylic adhesive * More cost-effective than heat-cure adhesive, screw mounting or clip mounting TYPICAL PROPERTIES OF BOND-PLY 800 PROPERTY Color Reinforcement Carrier IMPERIAL VALUE Gray METRIC VALUE Gray TEST METHOD Visual 0.005, 0.008 0.127, 0.203 ASTM D374 1500 10 ASTM D412 Fiberglass Thickness (inch) / (mm) Elongation (%, 45 to Warp & Fill) 70 Tensile Strength (psi) / (MPa) CTE (um/m-C), -40C to +125C 600 Continuous Use Temp (F) / (C) ADHESION Lap Shear @ RT (psi) / (MPa) (1) Fiberglass 70 -40 to 125 600 ASTM D3386 150 1.0 ASTM D1002 ELECTRICAL Dielectric Breakdown Voltage (Vac), 0.005 TEST METHOD ASTM D149 4.0 ASTM D150 6000 Volume Resistivity (Ohm-meter) Flame Rating THERMAL Thermal Conductivity (W/m-K) * Mount LED assembly to troffer housing * Mount LED assembly to heat sink * Mount heat spreader onto power converter PCB or onto motor control PCB * Mount heat sink to BGA graphic processor or drive processor ASTM D257 U.L. 94 0.8 10 25 ASTM D5470 50 100 5.6 5.3 TO-220 Thermal Performance (C/W), 0.005 5.0 5.0 4.8 Thermal Impedance (C-in2/W), 0.005 (2) 0.63 0.62 0.60 TO-220 Thermal Performance (C/W), 0.008 Thermal Impedance (C-in2/W), 0.008 (2) 6.2 0.78 6.0 0.74 0.72 4.3 0.58 0.71 200 4.2 5.2 0.57 0.71 1) Tested per ASTM D1002 with aluminum lap shear samples, 75 psi applied for 5 seconds then pressure removed. 0.5 square inch Bond-Ply 800 sample. 2) The ASTM D5470 test fixture was used. The recorded value includes interfacial thermal resistance. These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. - 00 - 1212 - Section D 0.005 Section C - Section B BP800 NA Section E Building a Part Number Section A Typical Applications Include: ASTM D149 1011 V-O THERMAL PERFORMANCE vs PRESSURE Initial Assembly Pressure (psi for 5 seconds) -- VALUE 4000 Dielectric Constant (1000 Hz) Bond-Ply 800 is a thermally conductive, electrically isolating double-sided tape. Bond-Ply(R) 800 is utilized in lighting applications that require thermal transfer and electric isolation. High bond strengths obtained at ambient temperature lead to significant processing cost savings in labor, materials and throughput due to the elimination of mechanical fasteners and high temperature curing. ASTM D412 -40 to 257 Dielectric Breakdown Voltage (Vac), 0.008 (R) -- Standard Options NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. 1212 = 12" x 12" sheets,12250 = 12" x 250' rolls or 00 = custom configuration 00 = Standard double-sided adhesive Standard thicknesses available: 0.005", 0.008" BP800 = Bond-Ply 800 Material Note: To build a part number, visit our website at www.bergquistcompany.com. Configurations Available: * Sheet form, roll form and die-cut parts The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 www.bergquistcompany.com The Bergquist Company European Headquarters Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company Asia Headquarters Hong Kong Phone: 852-2690-9296 Fax: 852-2690-3408 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_BP800_0714 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: BP800-0.008-00-1212 BP800-0.005-00-1212