Crystal oscillator Product Number (please contact us) SG-615 SG -531 SG -51 CRYSTAL OSCILLATOR (SPXO) OUTPUT : CMOS, TTL : Q33615xx2xxxx00 : Q32531xx2xxxx00 : Q32510xx2xxxx00 SG - 615 series SG - 531 / SG - 51 series Frequency range : 1.025 MHz to 135 MHz Supply voltage : 3.3 V Typ. / 5.0 V Typ. Function : Output enable(OE) or Standby( ST ) Pin compatible with full-size metal can. (SG-51 series) Pin compatible with half-size metal can. (SG-531 series) Actual size SG-531 SG-615 SG-51 Specifications (characteristics) Specifications Item Output frequency range Supply voltage Storage temperature Operating temperature Frequency tolerance Current consumption Disable current Symbol f0 VCC T_stg T_use f_tol ICC I_dis Symmetry SYM Output voltage VOH VOL Output load condition (TTL) Output load condition (CMOS) Input voltage Rise time / Fall time Start-up time Frequency aging *1 SG-615P SG-531P SG-51P 1.025 MHz to 26 MHz SG-615PTJ SG-531PTJ SG-51PTJ 26.001 MHz to 66.667 MHz 5.0 V 0.5 V -55 C to +125 C -20 C to +70 C *1 B : 50 10-6, C: 100 10-6 23 mA Max. 35 mA Max. 12 mA Max. 28 mA Max. 40 % to 60 % 40 % to 60 % 45 % to 55 % VCC-0.4 V Min. 2.4 V Min. 0.4 V Max. L_TTL 10 TTL Max. L_CMOS 50 pF Max. - VIH 2.0 V Min. 3.5 V Min. VIL 0.8 V Max. 1.5 V Max. 8 ns Max. 8 ns Max. 4 ms Max. 5 ns Max. 10 ms Max. tr / tf t_str f_aging 5 TTL Max. 5 10-6 / year Max. Conditions / Remarks Please contact us about available frequencies. Storage as single product. -20 C to +70 C No load condition OE=GND CMOS load:50 % VCC level TTL load: 1.4 V level IOH=-400 A IOL=16 mA(P)/ 8 mA(PTJ) L_CMOS 15 pF IIH= 1 A Max. (OE=VCC) IIL= -100 A Min. (OE=GND), PTJ:IIL= -500 A Min.(OE=GND) CMOS load:20 % VCC to 80 % VCC level TTL load:0.4 V to 2.4 V level Time at minimum supply voltage to be 0 s +25 C, VCC=5.0 V, First year "B" tolerance will be available up to 55 MHz. Specifications (characteristics) Item Symbol Output frequency range f0 Supply voltage Storage temperature Operating temperature VCC T_stg T_use Frequency tolerance f_tol Current consumption Disable current Stand-by current Symmetry ICC I_dis I_std SYM VOH VOL L_CMOS VIH VIL tr / tf t_str f_aging Output voltage Output load condition Input voltage Rise time / Fall time Start-up time Frequency aging SG-615PCG SG-531PCG Specifications SG-615SCG SG-531SCG 1.500 MHz to 26.000 MHz 2.7 V to 3.6 V -55 C to +125 C -40 C to +85 C B: 50 10-6 C: 100 10-6 M: 100 10-6 12 mA Max. 10 mA Max. 50 A Max. 45 % to 55 % VCC-0.4 V Min. 0.4 V Max. 25 pF Max. 70 % VCC Min. 20 % VCC Max. 4 ns Max. 12 ms Max. 5 10-6 / year Max. SG-615PCN 26.001 MHz to 66.667 MHz 3.0 V to 3.6 V Conditions / Remarks Please contact us about available frequencies. Storage as single product. 20 mA Max. 10 mA Max. VCC-0.4 V Min. 0.4 V Max. 15 pF Max. 70 % VCC Min. 30 % VCC Max. 10 ms Max. -20 C to +70 C -40 C to +85 C No load condition OE=GND (PCG,PCN) ST =GND (SCG) 50 % VCC level, L_CMOS=Max. IOH=-8 mA IOL= 8 mA OE Terminal or ST Terminal 20 % VCC to 80 % VCC level, L_CMOS Max. t=0 at 90% VCC +25 C, VCC=3.3 V, First year Crystal oscillator Specifications (characteristics) Item Symbol Output frequency range f0 Supply voltage Storage temperature Operating temperature VCC T_stg T_use Frequency tolerance f_tol Current consumption Disable current Stand-by current ICC I_dis I_std Symmetry SYM Output voltage VOH VOL Output load condition (TTL) Output load condition (CMOS) L_TTL SG-615PTW / STW SG-531PTW / STW Specifications SG-615PHW / SHW SG-531PHW / SHW 5 TTL Max. - Conditions / Remarks SG-615PCW / SCW SG-531PCW / SCW 26.001 MHz to 55.001 MHz to 135.000 MHz Please contact us about available frequencies. 135.000 MHz 5.0 V 0.5 V 3.3 V 0.3 V -55 C to +125 C Storage as single product. -20 C to +70 C -40 C to +85 C *2 -20 C to +70 C B: 50 10-6 , C : 100 x 10-6 M: 100 10-6 -40 C to +85 C 45 mA Max. 28 mA Max. No load condition( Max. frequency range ) 30 mA Max. 16 mA Max. OE=GND (PTW,PHW,PCW) 50 A Max. ST =GND (STW,SHW,SCW) 40 % to 60 % 50 % VCC level, L_CMOS=Max. 40 % to 60 % 1.4 V level ,L_CMOS=Max. VCC-0.4 V Min. IOH=-16 mA(PTW,STW,PHW,SHW),-8 mA(PCW,SCW) 0.4 V Max. IOL= 16 mA(PTW,STW,PHW,SHW), 8 mA(PCW,SCW) L_CMOS Rise time / Fall time 2.0 V Min. 0.8 V Max. tr / tf Start-up time Frequency aging f0 90 MHz , Max.supply voltage 15 pF Max. VIH VIL Input voltage - 4 ns Max. Max.frequency , Max.supply voltage 70 % VCC Min. 20 % VCC Max. 4 ns Max. - OE Terminal or ST Terminal 20 % VCC to 80 % VCC level, L_CMOS Max. 0.4 V to 2.4 V level Time at minimum supply voltage to be 0 s +25 C, VCC=5.0 V / 3.3 V, First year 10 ms Max.. -6 5 10 / year Max. t_str f_aging *2 "C" tolerance : f0 66.667 MHz(PTW,STW,PHW,SHW) (Unit:mm) External dimensions SG-615 series 14.0 Max. (Unit:mm) Footprint (Recommended) SG-615 series Pin map Pin Connection 1 OE or ST 2 GND 3 OUT 4 VCC 1.3 8.8 0.51 0.25 5.08 SG531PTJ 60.0000 E 9353B SG-51 series E SG51P 9353B 16.0000MHz #1 13.7 Max. #4 19.8 Max. #7 7.62 0.2Min. 2.54 Min. 5.3 Max. 7.62 0.51 0.25 90~105 Note. OE pin (P,PTJ,PTW,PHW,PCW,PCN,PCG) OE pin = "H" or "open" : Specified frequency output. OE pin = "L" : Output is high impedance. 0.51 Pin map Pin Connection 1 OE or ST 7 GND 8 OUT 14 VCC #8 #14 15.24 0.2Min. 2.54 Min. 5.3 Max. Pin map No. Pin terminal 1 OE or ST 4 GND 5 OUT 8 VCC #5 6.36 SG-531 series #8 7.62 0.25Min. 5.08 #1 Frequency tolerance -6 B 50 x 10 / -20 to +70C -6 C 100 x 10 / -20 to +70C -6 M 100 x 10 / -40 to +85C #2 4.7 Max. #1 8.65 SG-615P C 20.0000M E 9352A 9.8 Max. #3 #4 6.6 . Supply voltage C 3.3 V Typ. T,H 5.0 V Typ. Blank 5.0 V Typ. SG-615 P C G 20.000000MHz C Model Function (P: Output enable, S:Standby) Supply voltage Frequency Frequency tolerance 3.0 Product Name (Standard form) 7.62 0.25 90~105 ST pin (STW, SHW, SCW,SCG) ST pin = "H" or "open" : Specified frequency output. ST pin = "L" : Output is low level (weak pull - down),oscillation stops. To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND). PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM CONFORMING TO INTERNATIONAL STANDARDS At Seiko Epson, all environmental initiatives operate under the Plan-Do-Check-Action (PDCA) cycle designed to achieve continuous improvements. The environmental management system (EMS) operates under the ISO 14001 environmental management standard. All of our major manufacturing and non-manufacturing sites, in Japan and overseas, completed the acquisition of ISO 14001 certification. ISO 14000 is an international standard for environmental management that was established by the International Standards Organization in 1996 against the background of growing concern regarding global warming, destruction of the ozone layer, and global deforestation. WORKING FOR HIGH QUALITY In order provide high quality and reliable products and services than meet customer needs, Seiko Epson made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard. ISO/TS16949 is the international standard that added the sector-specific supplemental requirements for automotive industry based on ISO9001. Explanation of the mark that are using it for the catalog Pb free. Complies with EU RoHS directive. *About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) Designed for automotive applications such as Car Multimedia, Body Electronics, Remote Keyless Entry etc. Designed for automotive applications related to driving safety (Engine Control Unit, Air Bag, ESC etc ). Notice This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson. The information about applied circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does not assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / traffic control equipment / and others requiring equivalent reliability. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective. Seiko Epson Corporation