Electronic Terminal Block with Miniature Switching Relay 1/2 Data sheet 56 mm / 2.2 in 1 changeover contact 14 A2 11 A1 91 mm / 3.58 in 12 Item-No. Description Switching relay terminal block * 859-353 Switching relay terminal block with miniature switching relay 1 changeover contact for medium switching powers. * Safe electrical isolation meets DIN VDE 0140 and DIN EN 61140. * Mounting on DIN 35 rail. DC-Load limiting value graph U (V) 10 10 1010,1 1 10 / (A) Note: Inductive loads have to be attenuated by an appropriate protective circuit in order to protect relay coils and contacts ! WAGO Kontakttechnik GmbH & Co. KG Subject to design changes 21.06.2007 / d635300e.doc Postfach 2880 * D-32385 Minden Hansastr. 27 * D-32423 Minden Pack.-unit pcs 1 Technical Data Contact material Input nominal voltage UN Input voltage range Input nominal current IN (coil 20 C) Max. switching voltage Max. continuous current (terminal blocks in a row) Max. switching power (resistive) (resistive) Making capacity AgSnO2 AC/DC 12 V UN -15 %...+20 % 15 mA AC 250 V 5A AC 1250 VA DC see load limiting value graph 10 A at max. 4 s and 10 % relative cyclic duration factor 100 mA / AC/DC 12 V Recommended min. load Max. number of switching -1 -1 operations with/without load 6 min / 20 s Operating power < 300 mW Pull-in/dropout/bounce time typ 5 ms / 6 ms / 5 ms Operation at normal rating 100 % continuous duty Dielectric strength contact/coil 4 kV Surge voltage strength contact/coil (1.2/50 s) 6 kV Open contact 1 kV Nominal voltage acc. to VDE 0110 Part1/ 4.97 IEC 60664-1 250 V / 4 kV / 3 6 Mechanical life 5 x 10 switching operations 4 at max. load (resistive) 3 x 10 switching operations Ambient operating temperature at 0.85 x UN -25 C...+40 C -25 C...+50 C at UN at 1.2 x UN -25 C...+40 C Storage temperature -40 C...+70 C Terminal block width 6 mm / 0.236 in Tel.: Fax.: 05 71 / 8 87-0 E-Mail: 05 71 / 8 87-169 Web: info@wago.com http://www.wago.com Electronic Terminal Block with Miniature Switching Relay 2/2 1 changeover contact Data sheet Wire connection CAGE CLAMP(R) 2 0.08-2.5 mm / AWG 28-14 5-6 mm / 0.22 in Stripped length Standards / prescriptions Approvals Accessories End and intermediate plate Comb type jumper bar 2-way 3-way 4-way 5-way 10-way Test pin 1 mm O WAGO Kontakttechnik GmbH & Co. KG Subject to design changes 21.06.2007 / d635300e.doc Postfach 2880 * D-32385 Minden Hansastr. 27 * D-32423 Minden Tel.: Fax.: DIN VDE 0160, DIN EN 50178 DIN VDE 0435 (corresponding parts) DIN EN 61810 DIN VDE 0140, DIN EN 61140 E175199, UL508 at max. continuous current 3 A 859-525 859-402 859-403 859-404 859-405 859-410 859-500 05 71 / 8 87-0 E-Mail: 05 71 / 8 87-169 Web: info@wago.com http://www.wago.com