Vishay Semiconductors
TLUG240., TLUO240., TLUY240.
Document Number 83053
Rev. 2.1, 23-Mar-11
www.vishay.com
1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
Universal LED, Ø 1.8 mm Tinted Diffused Miniplast Package
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: 1.8 mm (miniplast)
• Product series: standard
• Angle of half intensity: ± 20°
FEATURES
• Three colors
• For DC and pulse operation
• Luminous intensity categorized
• End-to-end stackable in centre-to-centre
spacing of 0.1" (2.54 mm)
• Compliant to RoHS Directive 2002/95/EC
and in accordance to WEEE 2002/96/EC
APPLICATIONS
• General indicating and lighting purposes
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
19229
PARTS TABLE
PART COLOR, LUMINOUS INTENSITY TECHNOLOGY
TLUO2400 Red, IV > 1.6 mcd GaAsP on GaP
TLUO2401 Red, IV = (4 to 20) mcd GaAsP on GaP
TLUO2401-AS12 Red, IV = (4 to 20) mcd GaAsP on GaP
TLUY2400 Yellow, IV > 1 mcd GaAsP on GaP
TLUY2400-AS12 Yellow, IV > 1 mcd GaAsP on GaP
TLUY2401 Ye l l ow, I V = (2.5 to 12.5) mcd GaAsP on GaP
TLUY2401-AS12 Ye l l o w, I V = (2.5 to 12.5) mcd GaAsP on GaP
TLUY2401-AS12Z Ye l l o w, I V = (2.5 to 12.5) mcd GaAsP on GaP
TLUG2400 Green, IV > 1.6 mcd GaP on GaP
TLUG2400-AS12Z Green, IV > 1.6 mcd GaP on GaP
TLUG2400-ASZ Green, IV > 1.6 mcd GaP on GaP
TLUG2400-MS12Z Green, IV > 1.6 mcd GaP on GaP
TLUG2400-MS21Z Green, IV > 1.6 mcd GaP on GaP
TLUG2401 Green, IV = (4 to 20) mcd GaP on GaP
TLUG2401-AS12 Green, IV = (4 to 20) mcd GaP on GaP
TLUG2401-AS12Z Green, IV = (4 to 20) mcd GaP on GaP
www.vishay.com
2
Document Number 83053
Rev. 2.1, 23-Mar-11
Vishay Semiconductors
TLUG240., TLUO240., TLUY240.
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
Note:
1) in one packing unit IVmin./IVmax. 0.5
Note:
1) in one packing unit IVmin./IVmax. 0.5
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
TLUO240., TLUY240., TLUG240.
PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT
Reverse voltage VR6V
DC forward current
TLUO240. IF30 mA
TLUY240. IF30 mA
TLUG240. IF30 mA
Surge forward current tp 10 µs IFSM 1A
Power dissipation Tamb 55 °C
TLUO240. PV100 mW
TLUY240. PV100 mW
TLUG240. PV100 mW
Junction temperature Tj100 °C
Operating temperature range Tamb - 40 to + 100 °C
Storage temperature range Tstg - 55 to + 100 °C
Soldering temperature t 3 s, 2 mm from body Tsd 260 °C
t 5 s, 4 mm from body Tsd 260 °C
Thermal resistance junction/
ambient
TLUO240. RthJA 450 K/W
TLUY240. RthJA 450 K/W
TLUG240. RthJA 450 K/W
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLUO240., RED
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity 1) IF = 10 mA TLUO2400 IV1.6 2 mcd
TLUO2401 IV4520mcd
Dominant wavelength IF = 10 mA d612 625 nm
Peak wavelength IF = 10 mA p630 nm
Angle of half intensity IF = 10 mA ± 20 deg
Forward voltage IF = 20 mA VF23V
Reverse voltage IR = 10 µA VR615 V
Junction capacitance VR = 0, f = 1 MHz Cj50 pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLUY240., YELLOW
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity 1) IF = 10 mA TLUY2400 IV14 mcd
TLUY2401 IV2.5 8 12.5 mcd
Dominant wavelength IF = 10 mA d581 594 nm
Peak wavelength IF = 10 mA p585 nm
Angle of half intensity IF = 10 mA ± 20 deg
Forward voltage IF = 20 mA VF2.4 3 V
Reverse voltage IR = 10 µA VR615 V
Junction capacitance VR = 0, f = 1 MHz Cj50 pF
Document Number 83053
Rev. 2.1, 23-Mar-11
www.vishay.com
3
Vishay Semiconductors
TLUG240., TLUO240., TLUY240.
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
Note:
1) in one packing unit IVmin./IVmax. 0.5
Note:
Luminous intensity is tested at a current pulse duration of 25 ms and
an accuracy of ± 11 %.
These type numbers represent the order groups which include only
a few brightness groups. Only one group will be shipped on each
bag (there will be no mixing of two groups on each bag).
In order to ensure availability, single brightness groups will not be
orderable.
In a similar manner for colors where wavelength groups are
measured and binned, single wavelength groups will be shipped on
any one bag.
In order to ensure availability, single wavelength groups will not be
orderable.
Note:
Wavelengths are tested at a current pulse duration of 25 ms.
TYPICAL CHARACTERISTICS
Tamb = 25 °C, unless otherwise specified
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLUG240., GREEN
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity 1) IF = 10 mA TLUG2400 IV1.6 5 mcd
TLUG2401 IV41220mcd
Dominant wavelength IF = 10 mA d562 575 nm
Peak wavelength IF = 10 mA p565 nm
Angle of half intensity IF = 10 mA ± 20 deg
Forward voltage IF = 20 mA VF2.4 3 V
Reverse voltage IR = 10 µA VR615 V
Junction capacitance VR = 0, f = 1 MHz Cj50 pF
LUMINOUS INTENSITY CLASSIFICATION
GROUP LIGHT INTENSITY (mcd)
STANDARD MIN. MAX.
L 1 2
M1.6 3.2
N2.5 5
P 4 8
Q6.3 12.5
COLOR CLASSIFICATION
GROUP
DOM. WAVELENGTH (nm)
YELLOW GREEN
MIN. MAX. MIN. MAX.
1581 584
2583 586
3585 588 562 565
4587 590 564 567
5589 592 566 569
6591 594 568 571
7570 573
8572 575
Figure 1. Forward Current vs. Ambient Temperature
0
5
10
15
20
25
30
35
40
0 1020304050607080 90 100
Tamb - Ambient Temperature (°C)
18841
IF - Forward Current (mA)
red, yellow, green
Figure 2. Forward Current vs. Pulse Length
0.01 0.1 1 10
1
10
100
1000
10 000
tp - Pulse Length (ms)
100
95 10093
IF - Forward Current (mA)
green, yellow
orange, red
tp/T = 0.01 0.02
0.05
0.1
0.2
1
0.5
Tamb ≤ 55 °C
www.vishay.com
4
Document Number 83053
Rev. 2.1, 23-Mar-11
Vishay Semiconductors
TLUG240., TLUO240., TLUY240.
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
Figure 3. Rel. Luminous Intensity vs. Angular Displacement
Figure 4. Forward Current vs. Forward Voltage
Figure 5. Forward Current vs. Forward Voltage
0.4 0.2 0 0.2 0.4 0.6
95 10094
0.6
0.9
0.8
0°
30°
10° 20°
40°
50°
60°
70°
80°
0.7
1.0
IV rel - Relative Luminous Intensity
0.1
1
10
100
0
V
F
- Forward Voltage (V)
16634
IF - Forward Current (mA)
super red
5 432
1
0.1
1
10
100
1000
95 10086VF- Forward Voltage (V)
I - Forward Current (mA)
F
tp/T = 0.001
tp=10µs
red
1086420
Figure 6. Rel. Luminous Intensity vs. Ambient Temperature
Figure 7. Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle
Figure 8. Relative Luminous Intensity vs. Forward Current
0
0.4
0.8
1.2
1.6
95 10087
I - RelativeLuminous Intensity
vrel
red
I
F
=10mA
T
amb
-Ambient Temperature (°C)
20 40 60 800 100
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
95 10088
500
0.5 0.2 0.1 0.05 0.021
I
F
(mA)
t
p
/T
I - RelativeLuminous Intensity
vrel
2.0
red
I
FAV
= 10 mA, const.
I
F
- Forward Current (mA)
100
red
0.01
0.1
1
10
95 10089
I - RelativeLuminous Intensity
vrel
101
Document Number 83053
Rev. 2.1, 23-Mar-11
www.vishay.com
5
Vishay Semiconductors
TLUG240., TLUO240., TLUY240.
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
Figure 9. Relative Intensity vs. Wavelength
Figure 10. Forward Current vs. Forward Voltage
Figure 11. Rel. Luminous Intensity vs. Ambient Temperature
590 610 630 650 670 690
λ-Wavelength (nm)
red
0
0.2
0.4
0.6
0.8
1.2
95 10090
I - RelativeLuminous Intensity
vrel
1.0
0.1
1
10
100
1000
1086420
95 10030 VF - Forward Voltage (V)
IF - Forward Current (mA)
yellow
t
p
/T = 0.001
t
p
= 10 µs
0
0
0.4
0.8
1.2
1.6
95 10031
20 40 60 80100
I
V rel
- Relative Luminous Intensity
T
amb
- Ambient Temperature (°C)
yellow
I
F
= 10 mA
Figure 12. Rel. Lumin. Intensity vs. Forw. Current/Duty Cycle
Figure 13. Relative Luminous Intensity vs. Forward Current
Figure 14. Relative Intensity vs. Wavelength
yellow
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
95 10260
500
0.5 0.2 0.1 0.05 0.021
I
F
(mA)
t
p
/T
I
spec
- Specific Luminous Intensity
2.0
yellow
I
F
- Forward Current (mA)
100
0.1
1
10
95 10033
I
V rel
- Relative Luminous Intensity
101
0.01
550 570 590 610 630
0
0.2
0.4
0.6
0.8
1.2
650
95 10039
λ - Wavelength (nm)
1.0
yellow
Irel - Relative Intensity
www.vishay.com
6
Document Number 83053
Rev. 2.1, 23-Mar-11
Vishay Semiconductors
TLUG240., TLUO240., TLUY240.
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
Figure 15. Forward Current vs. Forward Voltage
Figure 16. Rel. Luminous Intensity vs. Ambient Temperature
Figure 17. Specific Luminous Intensity vs. Forward Current
0.1
1
10
100
1000
1086420
95 10034
V
F
- Forward Voltage (V)
I
F
- Forward Current (mA)
green
t
p
/T = 0.001
t
p
= 10 µs
0
0.4
0.8
1.2
1.6
95 10035
IV rel - Relative Luminous Intensity
green
IF = 10 mA
Tamb - Ambient Temperature (°C)
20 40 60 800100
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
95 10263
500
2.0
green
I
spec
- Specific Luminous Intensity
IF (mA)
0.5 0.2 0.1 0.05 0.021 tp/T
Figure 18. Relative Luminous Intensity vs. Forward Current
Figure 19. Relative Intensity vs. Wavelength
I
F
- Forward Current (mA)
100
green
0.1
1
10
95 10037
I
V rel
- Relative Luminous Intensity
101
520 540 560 580600
0
0.2
0.4
0.6
0.8
1.2
620
95 10038λ - Wavelength (nm)
1.0
green
Irel - Relative Intensity
Document Number 83053
Rev. 2.1, 23-Mar-11
www.vishay.com
7
Vishay Semiconductors
TLUG240., TLUO240., TLUY240.
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
PACKAGE DIMENSIONS in millimeters
REEL DIMENSIONS in millimeters TAPE
95 11262
Drawing-No.: 6.544-5052.01-4
Issue: 1; 12.10.95
Figure 20. Reel
Identification label:
355
90
30
48
45
52 max.
948641
Vishay/type/group/tape code/production code/quantity
Figure 21. LED in Tape
Paper
Adhesive tape
Identification label
Reel
Tape
Diodes: anode before cathode
Phototransistors: emitter before collector
Code 21
Diodes:
cathode before anode
Phototransistors:
collector before emitter
Code 12
94 8671
www.vishay.com
8
Document Number 83053
Rev. 2.1, 23-Mar-11
Vishay Semiconductors
TLUG240., TLUO240., TLUY240.
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For technical support, please contact: LED@vishay.com
AMMOPACK
Note:
The new nomenclature for ammopack is ASZ only, without suffix for
the LED orientation. The carton box has to be turned to the desired
position: “+” for anode first, or “-“ for cathode first. AS12Z and AS21Z
are still valid for already existing types, BUT NOT FOR NEW
DESIGN.
TAPE DIMENSIONS in millimeters
Figure 22. Tape Direction
Tape feed direction
Diodes: cathode before anode
Transistors: collector before emitter
Label
Tape feed direction
94 8667-2
Diodes: anode before cathode
Transistors: emitter before collecto
r
Option Dim. “H” ± 0.5 mm
AS 17.3
MS 25.5
Reel
(Mat. - No. 1764)
Quantity per:
2000
94 8171
0.3 ± 0.2
2.54 + 0.6
- 0.1
12.7 ± 0.2
5.08± 0.7
18+ 1
- 0.5
9± 0.5
Measure limit over 20 index-holes: ± 1
12 ± 0.3
0.9 max.
6.35 ± 0.7
Ø 4 ± 0.2
12.7 ± 1
± 1
“H”
± 2
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
