Product Details
DOCUMENTATION
PURCHASE
DK-20680A is a comprehensive development platform for IAM-20680, a high
performance 6-axis motion sensor that combines a 3-axis gyroscope, and a 3-axis
accelerometer.
The platform designed around a Microchip G55 microcontroller unit (MCU) can be
used by developers for rapid evaluation and development of IAM-20680-based
solutions. The DK-20680A includes an on-board embedded debugger so that
external tools are not required to program or debug the G55 MCU.
The development kit comes with all the necessary software including InvenSense
MotionLink, a GUI based development tool and embedded Motion Drivers for IAM-
20680.
Embedded Motion Drivers (eMD) consist of a set of application programming
interfaces (APIs) to configure various aspects of the platform including IAM-20680
sensor parameters such as full-scale range (FSR), output data rate (ODR), low-
power or low-noise mode, Accelerometer, Gyroscope Calibration, and sensor
interface to host (I2C, SPI).
Motion Link is a graphic user interface (GUI) based development tool included with
the platform. It can be used to capture and visualize the sensor data from the
motion sensor.
Part # Gyro Full Scale
Range
Gyro
Sensitivity
Gyro Rate
Noise
Accel Full Scale
Range
Accel
Sensitivity
Digital
Output
Logic Supply
Voltage
Operating Voltage
Supply
Package
Size
UNITS: (°/sec) (LSB/°/sec) dps/√Hz (g) LSB/g (V) (V +/-5%) (mm)
IAM-20680
±250
±500
±1000
±2000
131
65.5
32.8
16.4
0.008
0.008
0.008
0.008
±2, ±4, ±8, ±16
16384
8192
4096
2048
I2C or SPI VDD 1.71V–3.6V 3x3x0.75
InvenSense