00351-4 - KVASER - Product.Network

Kvaser Memorator Professional HS/HS

More information see

www.kvaser.com

Kvaser Memorator Professional is a two channel, high performance, CAN

bus interface and standalone Datalogger. Standalone mode logs data to

an expandable SD card slot; interface mode connects to the PC with

USB2.0. With the combined functionality of a standalone Datalogger and

USB Interface, the Memorator Professional contains an advanced set of

features: Message Filtering, Triggers, Error Detection Mode, Battery

Backup, an expandable SD Card slot, Linx J1587 compatible, Auto Transmit,

Galvanic Isolation, and much more. Configurable using Kvaser's included

Memorator Tools software.

As a data logger, the Kvaser Memorator Professional is the perfect tool to capture

irregular faults in the field or perform remote diagnosis. A great advantage is that

all configurations are made with a user-friendly configuration program and are

stored on the flash disk. It makes it both easy and convenient to set

configurations with the PC and download it to Kvaser Memorator Professional for

use in the field. The Kvaser Memorator Professional has a USB connection and

can be used as a powerful USB CAN bus interface (like our Kvaser USBcan

Professional).

Functions in Kvaser Memorator Professional

Triggers and Data Logger capabilities

Kvaser Memorator can log continuously, or logging can be triggered by

creating advanced triggers based on messages, data signal values, error

messages, external trigger's falling or rising edge, and I/O signals.

Pre- and post-triggers are available without buffer size restrictions, limited

by disk space only.

Handles up to 20 000 msgs/s in standalone logger mode.

Transmit messages to the bus network.

External digital output that can drive a LED or a buzzer.

< 250 ms boot up time.

Supports Silent Mode - log bus traffic safely without interfering and "listen-

only" mode for bus analysis tools.

Filters

Kvaser Memorator Professional can filter out selectable messages and/or

signals to be logged. The identifiers can be picked from a database, or all

messages can be logged.

Support for pass as well as stop filters.

Create a counting pass filter to have a message logged at enumerated

occurrence.

Memory cards and functions

Standard MMC or SD type flash memory cards can be used - up to 2GB.

Support for 16GB SDHC cards. Larger SDHC cards supported in the future

- up to 32GB.

Set up several devices in a daisy chain for larger logging capacity.

Transfer recorded data over the USB interface at 1.4 MB/s or an SD card

reader at 15 MB/s.

Configuration software in the PC

Easy to use graphic configuration tool - Kvaser Memorator Professional

Setup Tool.

Configuration of the CAN controller, i.e. bit rate and filters.

Configuration of the trigger conditions.

Configuration of filter for messages to be stored.

Configuration upload and download via USB.

Using the included Kvaser Dispatcher software, a complete measurement

setup can be turned into a self-installing package that is sent to a remote

location to carry out a specific logging task.

Major features of Kvaser Memorator

One device for desktop and laptop.

Functionality of a standalone CAN bus data logger and a USB CAN bus

interface in a single device.

Support for Kvaser Linx J1587.

Driver support for major operating systems.

Quick and easy plug-and-play installation.

Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B) identifiers.

CAN messages are time-stamped with 2 microseconds resolution.

Large on-board RAM buffer for CAN messages.

100% compatible with applications written for Kvaser Leaf, LAPcan,

PCIcan, PCcan, USBcan, etc., with Kvaser's CANlib.

Two CAN connections ISO-11898-2 high-speed, 10 kbit/s up to 1 Mbit/s.

Galvanic isolation to protect the hardware.

130mA current consumption.

Operating temperature range from -40 to + 85 C

Power from CAN bus or from the USB side.

Built-in real time (calendar) clock with battery backup.

Logger status is indicated with five externally visible LEDs.

Plastic housing with dimension W*L*H about 50*90*25 mm (circa 2 x 3,5 x

1 inch)

Additional software and documentation

Kvaser CANLIB SDK, which includes everything you need to develop

software for the Kvaser CAN boards. Includes full documentation and

many program samples, written in C, C++, C#, Delphi, and Visual Basic. All

Kvaser CAN interface boards share a common software API. Programs

written for one board type will run without modifications on the other

board types!

J2534 Application Programming Interface

RP1210A Application Programming Interface

On-line documentation in Windows HTML-Help and Adobe Acrobat

format.

Documentation, software and drivers can be downloaded for free at

www.kvaser.com or purchased separately on CD if preferred.

Technical Data

Kvaser Memorator Professional HS/HS

Galvanic Isolation Yes

Bitrate 10-1000 kbit/s

Silent mode Yes

Error frame generation Yes

Error frame detection Yes

Weight 150g

Timestamp resolution 2µs

On board buffer Yes

Maximum message rate, send 20000

Maximum message rate, receive 20000

Sound No

Clock synchronization MagiSync

Dimensions (WxLxH) 50x90x25mm

Temperature range -40°C to +85°C

Order number 73-30130-00351-4

The information herein is subject to change without notice

KVASER

Aminogatan 25

SE-431 53 Mölndal, Sweden

Telephone: +46 (0)31 88 63 44

E-mail: sales@kvaser.com