Discover TDK Solutions Discover TDK Solutions RF Components for Wireless Applications RF Components for Wireless Applications For Samples, Datasheets and Additional Product Information on these and other TDK Wireless Solutions . . . TDK RF Components & Services : TDK Corporation of America 1221 Business Center Drive, Mount Prospect, IL 60056 Phone: +1 (847) 803-6100 Fax: +1 (847) 803-1125 Email: wirelessinfo@tdktca.com Visit our website: www.component.tdk.com D i s c o v e r www.component.tdk.com T D K D i Band Pass Filters Diplexers Low Pass Filters Couplers High Frequency Inductors Circulators/ Isolators s c o Baluns Antennas High Pass Filters Test Services Test Equipment Anechoic Chambers v e r www.component.tdk.com T D K TDK Services for UWB Wireless Systems Table of Contents TDK Test & Measurement Solutions for Your UWB Wireless System UWB-EMC Test System UWB-EMC test system (for test and measurement of radiated emission from UWB radio) Ultra wide frequency measurement required FCC compliance test. Ultra wide dynamic ranges for UWB test which radiate very low power emission. TDK's original anechoic chamber, antenna, and software based test system. Possible to upgrade your EMC test systems to state-of-theart UWB-EMC test system. 3m chamber (FCC comply, 9x6x5.7m) Compact chamber (FCC comply, 7x4x3m) TDK's original hybrid anechoic chamber Test system for measurement up to 40GHz Hardware, software, & training are included TDK Offers Complete Turnkey Systems of Anechoic Chambers TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turnkey 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies. Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated. Anechoic chambers for EMC Testing: 3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m) TDK's high performance electromagnetic absorber material (IB-015 and IP-045 absorber) Automatically controlled turntable and antenna mast via optical fiber. Normalized Site Attenuation (NSA) measurement for compliance. D i s c o TDK offers a series of RF components for many wireless applications. From filters and antennas to test services and anechoic chambers solutions, TDK has a solution for you. WLAN SOLUTIONS PAGE 04 BLUETOOTH SOLUTIONS PAGE 08 WiMAX Solutions Page 10 UWB SOLUTIONS PAGE 13 Anechoic Chamber for Antenna Testing Anechoic chamber (compact type, 7x4x4m) TDK's high performance electromagnetic absorber material (IS-060 absorber) TDK' original oblique incident absorber, IS-SM050, for exceptional absorption performance Quiet zone (QZ) measurement v e r www.component.tdk.com 18 T D K D i s c o v e r www.component.tdk.com T D K RF Components for WLAN Applications TDK WLAN components provide leading edge miniaturization technology while providing exceptional electrical characteristics. TDK RF Components are recommended by leading WLAN chipset manufacturers. The following pages list our standard BPF's, LPF's, HPF's, diplexers and baluns for 2.4GHz & 5GHz WLAN. TDK Services for UWB Wireless Systems TDK Compliance Test Services & Expertise For UWB Wireless Systems TDK's advanced wireless radio testing services have been used by leading UWB chipset companies for both, FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing, report preparation and submission. Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products. TDK Test Labs located in Austin & Tokyo TDK supports the complete FCC submission process. Please contact TDK for evaluation samples and detailed specifications. Diplexer for 2.4GHz & 5GHz Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Start Frequency MHz Stop Frequency MHz Insertion Loss dB (MAX) Size mm (typ.) Part Number 2300 2500 0.65 4900 5950 1.4 2.0x1.25x0.95 DPX205950DT-9008A1 2300 2500 0.65 4900 5950 1.4 2.0x1.25x0.95 DPX205950DT-9018A1 2400 2500 0.5 4900 5850 0.75 2.0x1.25x0.95 DPX205850DT-4027B1 D i s c o v e r www.component.tdk.com 3D radiation pattern of typical dipole antenna. FCC granted UWB transceiver General Atomics: AEVK-1 Wisair: DV9100 T D K UWB transceiver testing requires measurements spanning wide frequency and dynamic ranges. TDK provides FCC compliance testing using specialized instrumentation and an optimized facility to provide test reports. D i s c o Antenna performance is an important part of the UWB solution. TDK performs antenna analysis for high performance Certified Wireless USB transceiver development. v e r www.component.tdk.com 17 T D K TDK RF Components for UWB Applications TDK Balanced Antenna for Use in UWB Applications TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The antenna's unique structure allows it to maintain similar performance regardless of ground plane size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has been designed for ease of integration in various applications without the worry of complex board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs. RF Components for WLAN Applications Multilayer Band Pass Filter for 2.4GHz Start Frequency MHz 2400 Stop Frequency MHz 2500 2300 2500 2400 There is a significant difference in ground plane size but almost no difference in VSWR results. The antenna bandwidth is not detuned by changing the ground plane size. Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 1.2 915 35 1910 35 4800 30 2.5X2.0X0.9 DEA252400BT-2027A1 1.4 915 35 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-2030A1 2500 1.5 915 35 2100 20 4800 23 2.5X2.0X0.9 DEA252450BT-2031A1 2400 2500 2.1 915 45 2170 20 4800 30 2.5X2.0X0.9 DEA252450BT-2024C1 2400 2300 2400 2400 2400 2400 2300 2400 2400 2400 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 3.2 3.0 3.0 1.5 1.5 2.9 2.0 2.0 2.5 3.0 800 960 960 1900 1300 960 915 915 915 1250 40 50 50 30 25 40 25 25 25 30 2170 1990 1990 23 48 40 4800 2170 2170 25 22 33 3600 2170 1910 1910 1910 1900 30 16 25 20 20 20 4800 4800 4800 4800 4800 4800 34 30 20 20 25 25 2.0X1.2X0.65 2.5X2.0X0.9 2.5X2.0X0.9 2.5X1.2X0.95 2.0X1.2X0.9 2.0X1.2X0.65 1.6X0.8X0.6 1.6X0.8X0.55 1.6X0.8X0.55 1.6X0.8X0.6 DEA252450BT-2068A1 DEA252450BT-2024C2 DEA252450BT-2024D4 DEA252450BT-1251A1 DEA252450BT-1213C1 DEA252450BT-2038A5 DEA162450BT-1241A1 DEA162450BT-1247B1 DEA162450BT-1247C1 DEA162450BT-1210A1 Low Pass Filter Start Frequency MHz 2400 Stop Frequency MHz 2500 2300 2500 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 0.42 4800 25 5000 25 7200 18 1.6X0.8X0.6 DEA162500LT-1212A1 0.48 4800 35 5000 35 7200 25 1.6X0.8X0.6 DEA162500LT-1217A1 Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 0.75 920 25 1790 17 1915 20 2.0X1.2X1.0 DEA202484HT-8002A1 1.4 920 25 1790 18 1915 18 1.6X0.8X0.6 DEA162400HT-8004B1 High Pass Filter Electrical Specifications Parameter Operation Frequency Polarization Antenna Gain Impedance VSWR Value Unit 3.1--5.2 Linear (Mixed) 2.0 (typ.) 50 3 (Max) GHz None dBi ohm None Start Frequency MHz 2400 Stop Frequency MHz 2484 2400 2500 Attenuation (MIN.) Sample Specification : DEA252450BT-2024C2 Mechanical Dimensions (unit: mm) Radiation Patterns Electrical Characteristics at 25deg C Contact TDK for full spec sheets and application notes D i s c o v e r www.component.tdk.com 16 T D K No. Parameter Freq. (MHz) 1 2 3 4 5 6 7 Insertion Loss Return Loss Attenuation Attenuation Attenuation Attenuation Attenuation 2400-2480 2400-2480 880-960 1565-1585 1710-1880 1930-1990 2110-2170 D i s Specification Min. Max. TYP -- 3.0 2.29 10.0 -- 13.7 50.0 -- 53.8 50.0 -- 54.7 48.0 -- 58.3 48.0 -- 65.5 22.0 -- 33.6 c o Unit dB dB dB dB dB dB dB v e r www.component.tdk.com T D K RF Components for WLAN Applications Multilayer Band Pass Filter for 5GHz (Wide Band) Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB 2.2 3450 5900 1.5 4900 5950 4900 4900 4940 Mechanical Dimensions Size mm (typ.) Part No. 35 1.6X0.8X0.6 DEA165487BT-1202 3450 35 2.0X1.2X0.9 DEA205437BT-1200 1.5 3450 25 9800 17 2.0X1.2X0.9 DEA205425BT-1209B2 5950 2.0 3300 40 4000 25 7300 14 2.0X1.2X0.95 DEA205425BT-2028A4 5850 5850 1.2 3.5 824 2700 50 40 1910 4650 50 24 9800 7250 15 39 2.5X2.0X0.9 2.5X2.0X1.0 DEA255375BT-2076A1 DEA255395BT-2065D2 MHz dB MHz dB Balun Example : unbalanced 50 to balanced 100 2.0 0.15 HHM 1583B1 Pin Configuration: 1. 2. 3. 4. 5. 6. Low Pass Filter Start Frequency MHz 5125 4900 Stop Frequency MHz 5725 5950 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB 1.5 0.7 6800 9800 12 20 10250 11900 25 30 11450 25 Size mm (typ.) Part No. 1.6X0.8X0.8 1.6X0.8X0.8 DEA165725LT-1196A2 DEA165850LT-1197B2 Bal. Imped. ohm MHz dB MHz 2.8 100 4000 30 8000 Sample Specification : DEA255425BT-2028A4 dB Part No. 20 2.0X1.5X1.3 DEA215425BT-7075C2 Parameter Specification Min. Max. TYP -- -- -- -- 1.6 2.0 Freq. (MHz) 1 Center Frequency 5425 2 Insertion Loss 4900-5950 Insertion Loss 3 4900-5950 -40 ~ +85 C 4 Return Loss 4900-5950 5 Attenuation 1280-3300 6 Attenuation 3300-4000 7 Attenuation 4375-4465 8 Attenuation 7300-8930 9 Attenuation 9800-11900 2 3 0.95 0.1 (Bottom View) Unit: mm < > < > < > 0.05 0.2 0.2 0.2 0.3 0.2 Amplitude Balance 0 -5 Electrical Characteristics at 25deg C No. 1 0.15 3 Size mm (typ.) Return Loss [dB] Ins. Loss dB (MAX) 4 Unbalanced Port GND or DC feed Balanced Port Balanced Port GND N.C. Return Loss Attenuation (MIN.) 5 0.35 0.2 3100.0 MHz -17.06 dB 4000 MHz -35.20 dB 4900 MHz - 20.65 dB -10 -15 -20 -25 -30 1.9 2.3 dB 9 40 25 7 14 25 11 50 33 12 18 38 -- -- -- -- -- -- dB dB dB dB dB dB 0 -1 -3 3000 -- dB -- 1 -2 -35 -45 2500 Unit 3100.0 MHz -0.10 dB 4000 MHz -0.27 dB 4900 MHz - 0.68 dB 2 -40 3500 4000 4500 Frequency [MHz] 5000 2500 5500 3000 3500 4000 4500 Frequency [MHz] 5000 5500 200 0.0 3100.0 MHz -0.44 dB 4000 MHz -0.35 dB 4900 MHz - 0.53 dB -0.5 Return Loss [dB] Stop Frequency MHz 5950 6 1.25 Balanced Output 100 ohm Unbalanced Input 50 ohm Balanced Output Multilayer Band Pass Filter Start Frequency MHz 4900 (Top View) 0.25 0.1/0.2 5150 TDK Baluns for UWB Applications Amplitude [dB] Stop Frequency MHz 5900 -1.0 -1.5 -2.0 Phase Balance [dB] Start Frequency MHz 5150 TDK RF Components for UWB Applications -2.5 -3.0 2500 3100.0 MHz 176.69 deg 4000 MHz 175.64 deg 4900 MHz 182.12 deg 190 180 170 160 3000 3500 4000 4500 Frequency [MHz] 5000 5500 2500 3000 3500 4000 4500 Frequency [MHz] 5000 5500 Electrical Characteristics at 25 degC D i s c o v e r www.component.tdk.com T D K No. PARAMETER FREQ (MHz) 1 Insertion Loss (Lo-Band Port) 2300-2500 2 Insertion Loss (Hi-Band Port) 3 Return Loss (ANT Port) 4 SPEC UNIT Min. Max. _ 1.2 dB 3168-4572 _ 1.7 dB 2300-2500 10.0 _ dB Return Loss (ANT Port) 3168-4572 4.5 5 Attenuation (Hi-Band Port) 2300-2500 20.0 _ dB 6 Attenuation (Lo-Band Port) 3168-4572 20.0 _ dB D i s c o v e r www.component.tdk.com 15 dB T D K TDK RF Components for UWB Applications RF Components for WLAN Applications TDK Band Pass Filters for UWB Applications TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version. The performance version is for applications requiring maximum attenuation at 2.4GHz and 5GHz applications. Reduced footprint series is for applications requiring minimum attenuation. DEA-3002B1 Performance Series Reduced Footprint Series [MECHANICAL DIMENSIONS] Balun Transformers for 2.4GHz Start Frequency MHz 2400 (2300) Stop Frequency MHz 2500 2400 (2300) 2500 2400 (2300) 2500 2400 (2300) Ins. Loss dB (MAX) Bal. Imed. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) Part No. 1.2 50 2.0 180+/- 10 2.0X1.2X0.95 HHM157(A2) 1.0 75 1.5 180+/- 10 2.0X1.2X0.95 HHM1541E1(E2) 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1520(A2) 2500 1.0(1.1) 200 2.0 180+/- 10 2.0X1.2X0.95 HHM1521(A2) 2400 2500 1.2 50 2.0 180+/- 10 1.6X0.8X0.6 HHM1711D1 2400 2500 1.2 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1711D1 2400 2500 1.0 100 1.5 180+/- 10 1.6X0.8X0.6 HHM1711N1 2400 2500 1.2 150 2.0 180+/- 10 1.6X0.8X0.6 HHM1712D1 2400 2500 1.2 200 1.7 180+/- 10 1.6X0.8X0.6 HHM1713E2 2400 2500 1.0 50 2.0 180+/- 10 1.0X0.5X0.45 HHM1902A1 2400 2500 1.0 100 2.0 180+/- 10 1.0X0.5X0.45 HHM1903A1 Part No. Balun Transformers for 5GHz (Wide Band) Electrical Characteristics at (T=30C to 85C, ZL=50) Parameter Freq. (MHz) Insertion Loss (T=25C) Insertion Loss (T=30C to 85C) Input Return Loss Attenuation Attenuation Attenuation Attenuation Attenuation 3168-4752 3168-4752 3168-4752 DC-2200 2200-2500 5151-5300 5300-7000 7000-14000 Specification Min. Max. TYP 1.9 2.2 10 30 26 23 26 15 Electrical Characteristics Ta=25C Unit dB dB dB dB dB dB dB dB No. Parameter Freq. (MHz) Specification Unit 1 2 Insertion Loss 3.168-4.752 2.0 max dB Return Loss 3.168-4.752 10 min dB 3 Attenuation DC-2.4 25 min dB 4 Attenuation 2.5 25 min dB 5 6 Attenuation Attenuation 5.15-7.0 7.0-14.5 20 min 15 min dB dB Frequency Characteristic Frequency Characteristic Start Frequency MHz 5150 Stop Frequency MHz 5875 4900 5950 4900 Ins. Loss dB (MAX) Bal. Imed. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1562B 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1570B1 5950 1.2 50 1.0 180+/- 10 1.6X0.8X0.6 HHM1733B1 4900 5950 1.0 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1732B1 4900 5950 1.2 200 1.5 180+/- 10 1.6X0.8X0.6 HHM1752A2 Balun Transformers for Local (802.11a) Start Frequency MHz 3400 Stop Frequency MHz 4010 3400 3400 Ins. Loss dB (MAX) Bal. Imed. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) Part No. 1.2 50 1.5 180+/- 10 2.0X1.2X0.95 HHM1545 4010 0.8 100 1.5 180+/- 10 2.0X1.2X0.95 HHM1594A1 3925 1.2 200 1.0 180+/- 10 1.6X0.8X0.6 HHM1548E1 UWB-Typical Data (De-embedded) 0 -10 Gain (dB) -20 -30 -40 -50 -60 500 1500 2500 3500 4500 5500 6500 7500 8500 9500 Frquency (MHz) Please contact TDK for full spec sheets and application notes. D i s c o v e r www.component.tdk.com 14 T D K D i s c o v e r www.component.tdk.com T D K RF Components for Bluetooth Applications TDK RF Components for UWB Applications TDK RF components can be used in different architectures (see Example 1 & 2). Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun information. Wireless Ecosystem TDK RF Components are recommended by leading Bluetooth chipset manufacturers. TDK has designed a series of Balanced Output BPF's that are optimized to match the impedance requirements of Bluetooth IC's. The Wireless Ecosystem brings together various technologies required to develop and manufacture advanced wireless products, systems and equipment. TDK provides key building blocks necessary to bring Certified Wireless USB, High Data Rate Bluetooth and other UWB products to market. Balanced impedance can be optimized to match IC ANT Balanced output BPF TDK components & services for UWB Technology include: Switch BPF Balun Transceiver Base band D i s c o v e r www.component.tdk.com T D K D Antennas Baluns Band Pass Filters Diplexers EMI Filters i s c o Test Systems Test Services Anechoic Chambers Inductors Capacitors v e r www.component.tdk.com 13 T D K TDK RF Components for WiMAX Applications RF Components for Bluetooth Applications Ceramic Block Band Pass Filter for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz Start Frequency MHz 2490 3230 3390 3590 Stop Frequency MHz 2710 3410 3660 3810 MULTILAYER Band Pass Filter (Balance output Type) P/N: DEA 252450BT-7022B1 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz 1.2 1.2 1.2 1.2 1800 1800 1800 1800 44 56 58 58 3400 2462 2462 2462 42 45 45 45 4400 4400 4400 4400 dB Size mm (typ.) Part No. 38 37 40 48 8.0X3.0X3.5 8.0X3.0X3.5 8.0X3.0X3.5 8.0X3.0X3.5 S0486A S0486B S0486C S0486D For Bluetooth and 2.4Ghz W-LAN MECHANICAL DIMENSIONS Stop Frequency MHz 2700 2900 3100 3400 3600 Ins. Loss dB (MAX) Isolation dB (min) V.S.W.R. 0=50 ohm (Max) Max. Handling Power (W) 0.4 0.4 0.5 Size mm (typ.) Part No. 20.0 1.3 20.0 1.25 20.0 20X20X8.5 CU1S2001AC-2600 20.0 20X20X11.5 CU1S2002AC-3000 18.0 1.3 20 (Ave) 20X20X8.0 CU1S2001AC-3500 Parameter Specification Typical Value Unit Frequency Range (Pass Band) 2400-2500 -- MHz Unbalanced Port Characteristics Impedance 50 (nominal) -- Balanced Port Characteristics Impedance 100 (nominal) -- Unbalanced Port Return Loss 9.5 min -- dB +25C 3.0 max 2.7 dB Insertion Loss (Pass Band) -40 -- +85C 3.0 max 3.0 dB PIN CONFIGURATION PIN ASSIGNMENT PIN No. Unbalanced 1 Balanced 4,5 GND 3,6 DC feed or RF GND 2 Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz Start Frequency MHz 2500 Electrical Characteristics Top View Ripple (Pass Band) 880-960MHz 1710-1880MHz 1880-1980MHz Attenuation 2110-2170MHz 4800-5000MHz Apmlitude Impedence at Balanced Port +25C Phase Differences at Balanced Port -40 -- +85C Ceramic Block Band Pass Filter for 700MHz Start Frequency MHz 700 Stop Frequency MHz 750 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 2.2 650 30 800 25 1000 40 13.2X10X4 S0465D 1.0 max 48 min 45 min 40 min 25 min 30 min 1.0 max 1808 18010 0.2 52 51 54 33 38 -0.2 183 -- dB dB dB dB dB dB dB Deg Deg Front-End Module for 802.16e Mobile WiMAX Applications * Operating Frequency: 2.5 to 2.7 GHz * Integrated 25dB Attenuator * Integrated Output Power Detector * 50 W Matched RF Ports * Low Profile LGA Package for Mobile Application: 6.0 x 5.6 x 1.2 mm * Supports 1X2 (1 TX & 2 RX) Configuration * Multi-Chip Technology: Integrated Power Amplifier and T/R Switch * Utilizes TDK's LTCC Technology to embed all required filtering For 2.4GHz Multilayer Balanced Band Pass Filter Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Bal. Imped. ohm 2400 2500 1.7 2400 2500 2400 RX Balanced BPF RX2_2G_P dB MHz dB 50 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-7014D1 1.9 100 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-7012D1 2500 2.4 50 1920 20 4800 23 2.5X2.0X0.9 DEA252450BT-7001B1 2500 3.0 100 2170 20 4800 30 2.5X2.0X0.9 DEA252450BT-7022B1 2402 2480 3.5 30+j30 2170 23 4800 25 2.5X2.0X0.95 DEA252441BT-7053D2 RX1_2G_P 2400 2500 3.6 34+j72 2170 48 2170 22 2.5X2.0X0.9 DEA252450BT-7035B2 2400 2500 2.7 50 2170 40 2170 33 2.1X1.50X0.9 DEA212450BT-7031A1 2400 2500 3.6 55+j50 2170 2.1X1.50X0.9 DEA212450BT-7043C1 2402 2480 CSR BC4 CSR BC4 2.1X1.25X0.6 DEA202450BT-7041E1 2400 2500 3.4 55+j50 2168 20 2.1X1.25X0.9 DEA202450BT-7089C2 2400 2500 3.5 100 2170 25 2.1X1.25X0.7 DEA202450BT-7054B1 2400 2500 3.5 34+j72 2170 17 2.1X1.25X0.95 DEA202450BT-7077A1 RX1_2G_N ESD Protection ANT1 Part No. MHz 2400 RX Balanced BPF SPDT Size mm (typ.) RX2_2G_N ANT2 VCNT1 Attenuation (MIN.) Power Amplifier with Power Detection TX Balun Match to CSR BC4 Bias TX_2G_P TX LPF VCNT2 4800 26 TX_2G_N VDET D i s c o VCC_PA VREF 25 VATT v e r www.component.tdk.com 12 4800 T D K D i s c o v e r www.component.tdk.com T D K TDK RF Components for WiMAX Applications TDK's newest line-up of RF Components for WiMAX applications can be used in both client and base station designs. These components have been developed to work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands. TDK RF Components for WiMAX Applications Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz Start Frequency MHz 2300 Stop Frequency MHz 2700 2300 2500 Ins. Loss dB (MAX) Bal. Imed. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) Part No. 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1710J1 2700 1.2 100 1.5 180+/- 10 1.6X0.8X0.6 HHM1711E1 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1711K1 2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1791A1 3300 3300 3900 3900 1.2 1.0 50 100 1.5 1.2 180+/- 10 180+/- 10 1.6X0.8X0.6 1.6X0.8X0.6 HHM1727D1 HHM1715E1 Multilayer Ceramic Band Pass Filter Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 2300 2690 1.8 915 30 1800 19 4800 43 2.0X1.25X.95 DEA202495BT-124B2 2496 2690 2.5 960 50 2125 28 4800 33 2.5X2.0X1.0 DEA252593BT-2074A3 2496 2690 1.5 915 50 2125 31 4800 45 2.5X2.0X1.0 DEA252593BT-2079A1 3300 3900 2.2 915 27 2170 27 4800 15 2.0X1.25X.95 DEA203600BT-1230B2 Attenuation (MIN.) Low Pass Filter Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 2400 2700 0.4 4800 26 5350 26 7200 23 1.6X0.8X0.6 DEA162700LT-5014A1 3400 3600 0.5 5000 10 5000 30 7200 26 1.6X0.8X0.6 DEA163600LT-5017A1 Attenuation (MIN.) Multilayer Ceramic Balanced Band Pass Filter Couplers 2.3GHz, 2.5GHz & 3.5GHz D Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Coupling dB Isolation dB V.S.W.R Size mm (typ.) Part No. 2300 2700 0.55 -12 +/- 1.5 20 Min. 1.5 1.6X0.8X0.6 HHM2241SA3 2300 2700 0.40 -20 +/- 1.5 32 Min. 1.3 1.6X0.8X0.6 HHM2233SA7 2300 2700 0.40 -16 +/- 1.5 25 Min. 1.3 1.6X0.8X0.6 HHM2245SA3 3400 3600 0.35 -18 +/- 1.5 23 Min. 1.3 1.6X0.8X0.6 HHM2261SA1 i s c o v e r www.component.tdk.com T Start Frequency MHz 2300 Stop Frequency MHz 2400 2300 2690 2300 3300 3300 Attenuation (MIN.) Ins. Loss dB (MAX) Bal. Imped. ohm MHz dB MHz dB Size mm (typ.) Part No. 2.5 100 1910 39 4800 36 2.5X2.0X1.0 DEA252350BT-7093A1 2.8 50 1910 13 4800 40 2.5X2.0X0.9 DEA212495BT-7055A2 2690 2.5 100 1910 18 4800 23 2.5X2.0X0.9 DEA212495BT-7097A2 3900 3900 2.5 2.5 50 100 1910 1910 49 30 5000 4800 17 13 2.5X2.0X0.9 2.5X2.0X0.95 DEA213600BT-7095A2 DEA213600BT-7095A1 Diplexer D K Start Frequency MHz 2300 Stop Frequency MHz 2690 2300 2500 D i 1.6 Start Frequency MHz 3300 Stop Frequency MHz 3900 2690 1.9 3300 2690 1.2 3300 Ins. Loss dB (MAX) s c o Ins. Loss dB (MAX) Size mm (typ.) Part No. 1.6 2.0X1.25X0.60 DPX203900DT-9019A1 3900 1.7 3.2X2.5X1.2 DPX322600DT-0003 3900 1.3 3.2X2.5X1.2 DPX323600DT-0004 v e r www.component.tdk.com 11 T D K TDK RF Components for WiMAX Applications TDK's newest line-up of RF Components for WiMAX applications can be used in both client and base station designs. These components have been developed to work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands. TDK RF Components for WiMAX Applications Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz Start Frequency MHz 2300 Stop Frequency MHz 2700 2300 2500 Ins. Loss dB (MAX) Bal. Imed. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) Part No. 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1710J1 2700 1.2 100 1.5 180+/- 10 1.6X0.8X0.6 HHM1711E1 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1711K1 2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1791A1 3300 3300 3900 3900 1.2 1.0 50 100 1.5 1.2 180+/- 10 180+/- 10 1.6X0.8X0.6 1.6X0.8X0.6 HHM1727D1 HHM1715E1 Multilayer Ceramic Band Pass Filter Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 2300 2690 1.8 915 30 1800 19 4800 43 2.0X1.25X.95 DEA202495BT-124B2 2496 2690 2.5 960 50 2125 28 4800 33 2.5X2.0X1.0 DEA252593BT-2074A3 2496 2690 1.5 915 50 2125 31 4800 45 2.5X2.0X1.0 DEA252593BT-2079A1 3300 3900 2.2 915 27 2170 27 4800 15 2.0X1.25X.95 DEA203600BT-1230B2 Attenuation (MIN.) Low Pass Filter Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 2400 2700 0.4 4800 26 5350 26 7200 23 1.6X0.8X0.6 DEA162700LT-5014A1 3400 3600 0.5 5000 10 5000 30 7200 26 1.6X0.8X0.6 DEA163600LT-5017A1 Attenuation (MIN.) Multilayer Ceramic Balanced Band Pass Filter Couplers 2.3GHz, 2.5GHz & 3.5GHz D Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Coupling dB Isolation dB V.S.W.R Size mm (typ.) Part No. 2300 2700 0.55 -12 +/- 1.5 20 Min. 1.5 1.6X0.8X0.6 HHM2241SA3 2300 2700 0.40 -20 +/- 1.5 32 Min. 1.3 1.6X0.8X0.6 HHM2233SA7 2300 2700 0.40 -16 +/- 1.5 25 Min. 1.3 1.6X0.8X0.6 HHM2245SA3 3400 3600 0.35 -18 +/- 1.5 23 Min. 1.3 1.6X0.8X0.6 HHM2261SA1 i s c o v e r www.component.tdk.com 10 T Start Frequency MHz 2300 Stop Frequency MHz 2400 2300 2690 2300 3300 3300 Attenuation (MIN.) Ins. Loss dB (MAX) Bal. Imped. ohm MHz dB MHz dB Size mm (typ.) Part No. 2.5 100 1910 39 4800 36 2.5X2.0X1.0 DEA252350BT-7093A1 2.8 50 1910 13 4800 40 2.5X2.0X0.9 DEA212495BT-7055A2 2690 2.5 100 1910 18 4800 23 2.5X2.0X0.9 DEA212495BT-7097A2 3900 3900 2.5 2.5 50 100 1910 1910 49 30 5000 4800 17 13 2.5X2.0X0.9 2.5X2.0X0.95 DEA213600BT-7095A2 DEA213600BT-7095A1 Diplexer D K Start Frequency MHz 2300 Stop Frequency MHz 2690 2300 2500 D i 1.6 Start Frequency MHz 3300 Stop Frequency MHz 3900 2690 1.9 3300 2690 1.2 3300 Ins. Loss dB (MAX) s c o Ins. Loss dB (MAX) Size mm (typ.) Part No. 1.6 2.0X1.25X0.60 DPX203900DT-9019A1 3900 1.7 3.2X2.5X1.2 DPX322600DT-0003 3900 1.3 3.2X2.5X1.2 DPX323600DT-0004 v e r www.component.tdk.com T D K TDK RF Components for WiMAX Applications RF Components for Bluetooth Applications Ceramic Block Band Pass Filter for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz Start Frequency MHz 2490 3230 3390 3590 Stop Frequency MHz 2710 3410 3660 3810 MULTILAYER Band Pass Filter (Balance output Type) P/N: DEA 252450BT-7022B1 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz 1.2 1.2 1.2 1.2 1800 1800 1800 1800 44 56 58 58 3400 2462 2462 2462 42 45 45 45 4400 4400 4400 4400 dB Size mm (typ.) Part No. 38 37 40 48 8.0X3.0X3.5 8.0X3.0X3.5 8.0X3.0X3.5 8.0X3.0X3.5 S0486A S0486B S0486C S0486D For Bluetooth and 2.4Ghz W-LAN MECHANICAL DIMENSIONS Stop Frequency MHz 2700 2900 3100 3400 3600 Ins. Loss dB (MAX) Isolation dB (min) V.S.W.R. 0=50 ohm (Max) Max. Handling Power (W) 0.4 0.4 0.5 Size mm (typ.) Part No. 20.0 1.3 20.0 1.25 20.0 20X20X8.5 CU1S2001AC-2600 20.0 20X20X11.5 CU1S2002AC-3000 18.0 1.3 20 (Ave) 20X20X8.0 CU1S2001AC-3500 Parameter Specification Typical Value Unit Frequency Range (Pass Band) 2400-2500 -- MHz Unbalanced Port Characteristics Impedance 50 (nominal) -- Balanced Port Characteristics Impedance 100 (nominal) -- Unbalanced Port Return Loss 9.5 min -- dB +25C 3.0 max 2.7 dB Insertion Loss (Pass Band) -40 -- +85C 3.0 max 3.0 dB PIN CONFIGURATION PIN ASSIGNMENT PIN No. Unbalanced 1 Balanced 4,5 GND 3,6 DC feed or RF GND 2 Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz Start Frequency MHz 2500 Electrical Characteristics Top View Ripple (Pass Band) 880-960MHz 1710-1880MHz 1880-1980MHz Attenuation 2110-2170MHz 4800-5000MHz Apmlitude Impedence at Balanced Port +25C Phase Differences at Balanced Port -40 -- +85C Ceramic Block Band Pass Filter for 700MHz Start Frequency MHz 700 Stop Frequency MHz 750 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 2.2 650 30 800 25 1000 40 13.2X10X4 S0465D 1.0 max 48 min 45 min 40 min 25 min 30 min 1.0 max 1808 18010 0.2 52 51 54 33 38 -0.2 183 -- dB dB dB dB dB dB dB Deg Deg Front-End Module for 802.16e Mobile WiMAX Applications * Operating Frequency: 2.5 to 2.7 GHz * Integrated 25dB Attenuator * Integrated Output Power Detector * 50 W Matched RF Ports * Low Profile LGA Package for Mobile Application: 6.0 x 5.6 x 1.2 mm * Supports 1X2 (1 TX & 2 RX) Configuration * Multi-Chip Technology: Integrated Power Amplifier and T/R Switch * Utilizes TDK's LTCC Technology to embed all required filtering For 2.4GHz Multilayer Balanced Band Pass Filter Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Bal. Imped. ohm 2400 2500 1.7 2400 2500 2400 RX Balanced BPF RX2_2G_P dB MHz dB 50 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-7014D1 1.9 100 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-7012D1 2500 2.4 50 1920 20 4800 23 2.5X2.0X0.9 DEA252450BT-7001B1 2500 3.0 100 2170 20 4800 30 2.5X2.0X0.9 DEA252450BT-7022B1 2402 2480 3.5 30+j30 2170 23 4800 25 2.5X2.0X0.95 DEA252441BT-7053D2 RX1_2G_P 2400 2500 3.6 34+j72 2170 48 2170 22 2.5X2.0X0.9 DEA252450BT-7035B2 2400 2500 2.7 50 2170 40 2170 33 2.1X1.50X0.9 DEA212450BT-7031A1 2400 2500 3.6 55+j50 2170 2.1X1.50X0.9 DEA212450BT-7043C1 2402 2480 CSR BC4 CSR BC4 2.1X1.25X0.6 DEA202450BT-7041E1 2400 2500 3.4 55+j50 2168 20 2.1X1.25X0.9 DEA202450BT-7089C2 2400 2500 3.5 100 2170 25 2.1X1.25X0.7 DEA202450BT-7054B1 2400 2500 3.5 34+j72 2170 17 2.1X1.25X0.95 DEA202450BT-7077A1 RX1_2G_N ESD Protection ANT1 Part No. MHz 2400 RX Balanced BPF SPDT Size mm (typ.) RX2_2G_N ANT2 VCNT1 Attenuation (MIN.) Power Amplifier with Power Detection TX Balun Match to CSR BC4 Bias TX_2G_P TX LPF VCNT2 4800 26 TX_2G_N VDET D i s c o VCC_PA VREF 4800 25 VATT v e r www.component.tdk.com T D K D i s c o v e r www.component.tdk.com 9 T D K TDK RF Components for UWB Applications RF Components for WLAN Applications TDK Band Pass Filters for UWB Applications TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version. The performance version is for applications requiring maximum attenuation at 2.4GHz and 5GHz applications. Reduced footprint series is for applications requiring minimum attenuation. DEA-3002B1 Performance Series Reduced Footprint Series [MECHANICAL DIMENSIONS] Balun Transformers for 2.4GHz Start Frequency MHz 2400 (2300) Stop Frequency MHz 2500 2400 (2300) 2500 2400 (2300) 2500 2400 (2300) Ins. Loss dB (MAX) Bal. Imed. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) Part No. 1.2 50 2.0 180+/- 10 2.0X1.2X0.95 HHM157(A2) 1.0 75 1.5 180+/- 10 2.0X1.2X0.95 HHM1541E1(E2) 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1520(A2) 2500 1.0(1.1) 200 2.0 180+/- 10 2.0X1.2X0.95 HHM1521(A2) 2400 2500 1.2 50 2.0 180+/- 10 1.6X0.8X0.6 HHM1711D1 2400 2500 1.2 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1711D1 2400 2500 1.0 100 1.5 180+/- 10 1.6X0.8X0.6 HHM1711N1 2400 2500 1.2 150 2.0 180+/- 10 1.6X0.8X0.6 HHM1712D1 2400 2500 1.2 200 1.7 180+/- 10 1.6X0.8X0.6 HHM1713E2 2400 2500 1.0 50 2.0 180+/- 10 1.0X0.5X0.45 HHM1902A1 2400 2500 1.0 100 2.0 180+/- 10 1.0X0.5X0.45 HHM1903A1 Part No. Balun Transformers for 5GHz (Wide Band) Electrical Characteristics at (T=30C to 85C, ZL=50) Parameter Freq. (MHz) Insertion Loss (T=25C) Insertion Loss (T=30C to 85C) Input Return Loss Attenuation Attenuation Attenuation Attenuation Attenuation 3168-4752 3168-4752 3168-4752 DC-2200 2200-2500 5151-5300 5300-7000 7000-14000 Specification Min. Max. TYP 1.9 2.2 10 30 26 23 26 15 Electrical Characteristics Ta=25C Unit dB dB dB dB dB dB dB dB No. Parameter Freq. (MHz) Specification Unit 1 2 Insertion Loss 3.168-4.752 2.0 max dB Return Loss 3.168-4.752 10 min dB 3 Attenuation DC-2.4 25 min dB 4 Attenuation 2.5 25 min dB 5 6 Attenuation Attenuation 5.15-7.0 7.0-14.5 20 min 15 min dB dB Frequency Characteristic Frequency Characteristic Start Frequency MHz 5150 Stop Frequency MHz 5875 4900 5950 4900 Ins. Loss dB (MAX) Bal. Imed. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1562B 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1570B1 5950 1.2 50 1.0 180+/- 10 1.6X0.8X0.6 HHM1733B1 4900 5950 1.0 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1732B1 4900 5950 1.2 200 1.5 180+/- 10 1.6X0.8X0.6 HHM1752A2 Balun Transformers for Local (802.11a) Start Frequency MHz 3400 Stop Frequency MHz 4010 3400 3400 Ins. Loss dB (MAX) Bal. Imed. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) Part No. 1.2 50 1.5 180+/- 10 2.0X1.2X0.95 HHM1545 4010 0.8 100 1.5 180+/- 10 2.0X1.2X0.95 HHM1594A1 3925 1.2 200 1.0 180+/- 10 1.6X0.8X0.6 HHM1548E1 UWB-Typical Data (De-embedded) 0 -10 Gain (dB) -20 -30 -40 -50 -60 500 1500 2500 3500 4500 5500 6500 7500 8500 9500 Frquency (MHz) Please contact TDK for full spec sheets and application notes. D i s c o v e r www.component.tdk.com T D K D i s c o v e r www.component.tdk.com 7 T D K RF Components for WLAN Applications Multilayer Band Pass Filter for 5GHz (Wide Band) Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB 2.2 3450 5900 1.5 4900 5950 4900 4900 4940 Mechanical Dimensions Size mm (typ.) Part No. 35 1.6X0.8X0.6 DEA165487BT-1202 3450 35 2.0X1.2X0.9 DEA205437BT-1200 1.5 3450 25 9800 17 2.0X1.2X0.9 DEA205425BT-1209B2 5950 2.0 3300 40 4000 25 7300 14 2.0X1.2X0.95 DEA205425BT-2028A4 5850 5850 1.2 3.5 824 2700 50 40 1910 4650 50 24 9800 7250 15 39 2.5X2.0X0.9 2.5X2.0X1.0 DEA255375BT-2076A1 DEA255395BT-2065D2 MHz dB MHz dB Balun Example : unbalanced 50 to balanced 100 2.0 0.15 HHM 1583B1 Pin Configuration: 1. 2. 3. 4. 5. 6. Low Pass Filter Start Frequency MHz 5125 4900 Stop Frequency MHz 5725 5950 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB 1.5 0.7 6800 9800 12 20 10250 11900 25 30 11450 25 Size mm (typ.) Part No. 1.6X0.8X0.8 1.6X0.8X0.8 DEA165725LT-1196A2 DEA165850LT-1197B2 Bal. Imped. ohm MHz dB MHz 2.8 100 4000 30 8000 Sample Specification : DEA255425BT-2028A4 dB Part No. 20 2.0X1.5X1.3 DEA215425BT-7075C2 Parameter Specification Min. Max. TYP -- -- -- -- 1.6 2.0 Freq. (MHz) 1 Center Frequency 5425 2 Insertion Loss 4900-5950 Insertion Loss 3 4900-5950 -40 ~ +85 C 4 Return Loss 4900-5950 5 Attenuation 1280-3300 6 Attenuation 3300-4000 7 Attenuation 4375-4465 8 Attenuation 7300-8930 9 Attenuation 9800-11900 2 3 0.95 0.1 (Bottom View) Unit: mm < > < > < > 0.05 0.2 0.2 0.2 0.3 0.2 Amplitude Balance 0 -5 Electrical Characteristics at 25deg C No. 1 0.15 3 Size mm (typ.) Return Loss [dB] Ins. Loss dB (MAX) 4 Unbalanced Port GND or DC feed Balanced Port Balanced Port GND N.C. Return Loss Attenuation (MIN.) 5 0.35 0.2 3100.0 MHz -17.06 dB 4000 MHz -35.20 dB 4900 MHz - 20.65 dB -10 -15 -20 -25 -30 1.9 2.3 dB 9 40 25 7 14 25 11 50 33 12 18 38 -- -- -- -- -- -- dB dB dB dB dB dB 0 -1 -3 3000 -- dB -- 1 -2 -35 -45 2500 Unit 3100.0 MHz -0.10 dB 4000 MHz -0.27 dB 4900 MHz - 0.68 dB 2 -40 3500 4000 4500 Frequency [MHz] 5000 2500 5500 3000 3500 4000 4500 Frequency [MHz] 5000 5500 200 0.0 3100.0 MHz -0.44 dB 4000 MHz -0.35 dB 4900 MHz - 0.53 dB -0.5 Return Loss [dB] Stop Frequency MHz 5950 6 1.25 Balanced Output 100 ohm Unbalanced Input 50 ohm Balanced Output Multilayer Band Pass Filter Start Frequency MHz 4900 (Top View) 0.25 0.1/0.2 5150 TDK Baluns for UWB Applications Amplitude [dB] Stop Frequency MHz 5900 -1.0 -1.5 -2.0 -2.5 -3.0 2500 Phase Balance [dB] Start Frequency MHz 5150 TDK RF Components for UWB Applications 3100.0 MHz 176.69 deg 4000 MHz 175.64 deg 4900 MHz 182.12 deg 190 180 170 160 3000 3500 4000 4500 Frequency [MHz] 5000 5500 2500 3000 3500 4000 4500 Frequency [MHz] 5000 5500 Electrical Characteristics at 25 degC D i s c o v e r www.component.tdk.com 6 T D K No. PARAMETER FREQ (MHz) 1 Insertion Loss (Lo-Band Port) 2300-2500 2 Insertion Loss (Hi-Band Port) 3 Return Loss (ANT Port) 4 SPEC UNIT Min. Max. _ 1.2 dB 3168-4572 _ 1.7 dB 2300-2500 10.0 _ dB Return Loss (ANT Port) 3168-4572 4.5 5 Attenuation (Hi-Band Port) 2300-2500 20.0 _ dB 6 Attenuation (Lo-Band Port) 3168-4572 20.0 _ dB D i s c o v e r www.component.tdk.com dB T D K TDK RF Components for UWB Applications TDK Balanced Antenna for Use in UWB Applications TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The antenna's unique structure allows it to maintain similar performance regardless of ground plane size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has been designed for ease of integration in various applications without the worry of complex board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs. RF Components for WLAN Applications Multilayer Band Pass Filter for 2.4GHz Start Frequency MHz 2400 Stop Frequency MHz 2500 2300 2500 2400 There is a significant difference in ground plane size but almost no difference in VSWR results. The antenna bandwidth is not detuned by changing the ground plane size. Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 1.2 915 35 1910 35 4800 30 2.5X2.0X0.9 DEA252400BT-2027A1 1.4 915 35 1910 35 4800 30 2.5X2.0X0.9 DEA252450BT-2030A1 2500 1.5 915 35 2100 20 4800 23 2.5X2.0X0.9 DEA252450BT-2031A1 2400 2500 2.1 915 45 2170 20 4800 30 2.5X2.0X0.9 DEA252450BT-2024C1 2400 2300 2400 2400 2400 2400 2300 2400 2400 2400 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 3.2 3.0 3.0 1.5 1.5 2.9 2.0 2.0 2.5 3.0 800 960 960 1900 1300 960 915 915 915 1250 40 50 50 30 25 40 25 25 25 30 2170 1990 1990 23 48 40 4800 2170 2170 25 22 33 3600 2170 1910 1910 1910 1900 30 16 25 20 20 20 4800 4800 4800 4800 4800 4800 34 30 20 20 25 25 2.0X1.2X0.65 2.5X2.0X0.9 2.5X2.0X0.9 2.5X1.2X0.95 2.0X1.2X0.9 2.0X1.2X0.65 1.6X0.8X0.6 1.6X0.8X0.55 1.6X0.8X0.55 1.6X0.8X0.6 DEA252450BT-2068A1 DEA252450BT-2024C2 DEA252450BT-2024D4 DEA252450BT-1251A1 DEA252450BT-1213C1 DEA252450BT-2038A5 DEA162450BT-1241A1 DEA162450BT-1247B1 DEA162450BT-1247C1 DEA162450BT-1210A1 Low Pass Filter Start Frequency MHz 2400 Stop Frequency MHz 2500 2300 2500 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 0.42 4800 25 5000 25 7200 18 1.6X0.8X0.6 DEA162500LT-1212A1 0.48 4800 35 5000 35 7200 25 1.6X0.8X0.6 DEA162500LT-1217A1 Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 0.75 920 25 1790 17 1915 20 2.0X1.2X1.0 DEA202484HT-8002A1 1.4 920 25 1790 18 1915 18 1.6X0.8X0.6 DEA162400HT-8004B1 High Pass Filter Electrical Specifications Parameter Operation Frequency Polarization Antenna Gain Impedance VSWR Value Unit 3.1--5.2 Linear (Mixed) 2.0 (typ.) 50 3 (Max) GHz None dBi ohm None Start Frequency MHz 2400 Stop Frequency MHz 2484 2400 2500 Attenuation (MIN.) Sample Specification : DEA252450BT-2024C2 Mechanical Dimensions (unit: mm) Radiation Patterns Electrical Characteristics at 25deg C Contact TDK for full spec sheets and application notes D i s c o v e r www.component.tdk.com T D K No. Parameter Freq. (MHz) 1 2 3 4 5 6 7 Insertion Loss Return Loss Attenuation Attenuation Attenuation Attenuation Attenuation 2400-2480 2400-2480 880-960 1565-1585 1710-1880 1930-1990 2110-2170 D i s Specification Min. Max. TYP -- 3.0 2.29 10.0 -- 13.7 50.0 -- 53.8 50.0 -- 54.7 48.0 -- 58.3 48.0 -- 65.5 22.0 -- 33.6 c o Unit dB dB dB dB dB dB dB v e r www.component.tdk.com 5 T D K RF Components for WLAN Applications TDK WLAN components provide leading edge miniaturization technology while providing exceptional electrical characteristics. TDK RF Components are recommended by leading WLAN chipset manufacturers. The following pages list our standard BPF's, LPF's, HPF's, diplexers and baluns for 2.4GHz & 5GHz WLAN. TDK Services for UWB Wireless Systems TDK Compliance Test Services & Expertise For UWB Wireless Systems TDK's advanced wireless radio testing services have been used by leading UWB chipset companies for both, FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing, report preparation and submission. Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products. TDK Test Labs located in Austin & Tokyo TDK supports the complete FCC submission process. Please contact TDK for evaluation samples and detailed specifications. Diplexer for 2.4GHz & 5GHz Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Start Frequency MHz Stop Frequency MHz Insertion Loss dB (MAX) Size mm (typ.) Part Number 2300 2500 0.65 4900 5950 1.4 2.0x1.25x0.95 DPX205950DT-9008A1 2300 2500 0.65 4900 5950 1.4 2.0x1.25x0.95 DPX205950DT-9018A1 2400 2500 0.5 4900 5850 0.75 2.0x1.25x0.95 DPX205850DT-4027B1 D i s c o v e r www.component.tdk.com 4 3D radiation pattern of typical dipole antenna. FCC granted UWB transceiver General Atomics: AEVK-1 Wisair: DV9100 T D K UWB transceiver testing requires measurements spanning wide frequency and dynamic ranges. TDK provides FCC compliance testing using specialized instrumentation and an optimized facility to provide test reports. D i s c o Antenna performance is an important part of the UWB solution. TDK performs antenna analysis for high performance Certified Wireless USB transceiver development. v e r www.component.tdk.com T D K RF Components for Bluetooth Applications TDK RF Components for UWB Applications TDK RF components can be used in different architectures (see Example 1 & 2). Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun information. Wireless Ecosystem TDK RF Components are recommended by leading Bluetooth chipset manufacturers. TDK has designed a series of Balanced Output BPF's that are optimized to match the impedance requirements of Bluetooth IC's. The Wireless Ecosystem brings together various technologies required to develop and manufacture advanced wireless products, systems and equipment. TDK provides key building blocks necessary to bring Certified Wireless USB, High Data Rate Bluetooth and other UWB products to market. Balanced impedance can be optimized to match IC ANT Balanced output BPF TDK components & services for UWB Technology include: Switch BPF Transceiver Balun Base band D i s c o v e r www.component.tdk.com 8 T D K D Antennas Baluns Band Pass Filters Diplexers EMI Filters i s c o Test Systems Test Services Anechoic Chambers Inductors Capacitors v e r www.component.tdk.com T D K TDK Services for UWB Wireless Systems Table of Contents TDK Test & Measurement Solutions for Your UWB Wireless System UWB-EMC Test System UWB-EMC test system (for test and measurement of radiated emission from UWB radio) Ultra wide frequency measurement required FCC compliance test. Ultra wide dynamic ranges for UWB test which radiate very low power emission. TDK's original anechoic chamber, antenna, and software based test system. Possible to upgrade your EMC test systems to state-of-theart UWB-EMC test system. 3m chamber (FCC comply, 9x6x5.7m) Compact chamber (FCC comply, 7x4x3m) TDK's original hybrid anechoic chamber Test system for measurement up to 40GHz Hardware, software, & training are included TDK Offers Complete Turnkey Systems of Anechoic Chambers TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turnkey 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies. Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated. Anechoic chambers for EMC Testing: 3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m) TDK's high performance electromagnetic absorber material (IB-015 and IP-045 absorber) Automatically controlled turntable and antenna mast via optical fiber. Normalized Site Attenuation (NSA) measurement for compliance. D i s c o TDK offers a series of RF components for many wireless applications. From filters and antennas to test services and anechoic chambers solutions, TDK has a solution for you. WLAN SOLUTIONS PAGE 04 BLUETOOTH SOLUTIONS PAGE 08 WiMAX Solutions Page 10 UWB SOLUTIONS PAGE 13 Anechoic Chamber for Antenna Testing Anechoic chamber (compact type, 7x4x4m) TDK's high performance electromagnetic absorber material (IS-060 absorber) TDK' original oblique incident absorber, IS-SM050, for exceptional absorption performance Quiet zone (QZ) measurement v e r www.component.tdk.com T D K D i s c o v e r www.component.tdk.com T D K Discover TDK Solutions Discover TDK Solutions RF Components for Wireless Applications RF Components for Wireless Applications For Samples, Datasheets and Additional Product Information on these and other TDK Wireless Solutions . . . TDK RF Components & Services : TDK Corporation of America 1221 Business Center Drive, Mount Prospect, IL 60056 Phone: +1 (847) 803-6100 Fax: +1 (847) 803-1125 Email: wirelessinfo@tdktca.com Visit our website: www.component.tdk.com D i s c o v e r www.component.tdk.com T D K D i Band Pass Filters Diplexers Low Pass Filters Couplers High Frequency Inductors Circulators/ Isolators s c o Baluns Antennas High Pass Filters Test Services Test Equipment Anechoic Chambers v e r www.component.tdk.com T D K