0.5mmピッチ
1
FHS CONNECTOR
0.5mmピッチ
0.5mm pitch/Connectors for FPC
Emboss Tape
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/60m Ωmax.
After environmental testing/60m Ωmax.
(variation from initial value)
• Insulation resistance: 800M Ωmin.
• Withstanding voltage: 200V AC/minute
• Applicable FPC: Conductor pitch/0.5mm
Conductor width/0.35mm
Mating part thickness/0.2±0.03mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
FHS connector is a space-saving type
connector for FPC with 3.1mm depth,
though it is low profile of 0.9mm
mounting height. 0.2mm thick
standard FPC.
• Space saving design
• Heat resisting design suitable for surface
mounting
• Self-lock mechanism enables the cover to
close by one-touch operation
±0.05
0.4 ±0.05
0.8
±0.03
0.3
±0.03
0.5
±0.03
A
±0.05
0.35
±0.05
1.2 ±0.05
0.7
±0.05
1.36
0.9
2.95 0.15
Note: 1.Tolerances are non-cumulative:
±
0.03mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
PC board layout (viewed from component side) and Assembly layout
2
FHS CONNECTOR
0.5mmピッチ
A
0.65
B
0.9
C 2.95
0.5
Circuits
Model No. Dimensions (mm)
AB
Q'ty /
reel
3
4
6
8
9
03FHS-RSM1-GAN-TB
04FHS-RSM1-GAN-TB
06FHS-RSM1-GAN-TB
08FHS-RSM1-GAN-TB
09FHS-RSM1-GAN-TB
1.0
1.5
2.5
3.5
4.0
3.0
3.5
4.5
5.5
6.0
C
3.56
4.06
5.06
6.06
6.56
6,000
6,000
6,000
6,000
6,000
Material and Finish
Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe)
Housing: LCP, UL94V-0
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
Cover: PPS, UL94V-0
RoHS compliance This product displays (LF)(SN) on a label.
Note: This products listed above are supplied on embossed-tape.
（3.0）
±0.03
0.2
Reinforcing layer
2.5min
±0.05
0.5（N＋1）
±0.03
0.5（N−1）
±0.04
0.35
±0.03
0.5
±0.1 ±0.1
0.50.5
Connector
Lead section dimensions of FPC
Note: N --- Number of circuits