Emboss Tape FHS CONNECTOR 0.5mm pitch/Connectors for FPC 0.5mm Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/60m max. After environmental testing/60m max. (variation from initial value) * Insulation resistance: 800M min. * Withstanding voltage: 200V AC/minute * Applicable FPC: Conductor pitch/0.5mm Conductor width/0.35mm Mating part thickness/0.20.03mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. FHS connector is a space-saving type connector for FPC with 3.1mm depth, though it is low profile of 0.9mm mounting height. 0.2mm thick standard FPC. * Space saving design * Heat resisting design suitable for surface mounting * Self-lock mechanism enables the cover to close by one-touch operation Standards ---------------------- 0 Recognized E60389 PC board layout (viewed from component side) and Assembly layout 0.03 1.36 0.05 1.2 0.05 0.4 0.05 0.8 Note: 1.Tolerances are non-cumulative: 0.03mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 1 2.95 0.15 0.9 0.05 0.35 0.7 0.03 0.3 0.05 0.05 A 0.03 0.5 FHS CONNECTOR Connector Dimensions (mm) A B C Q'ty / reel 03FHS-RSM1-GAN-TB 1.0 3.0 3.56 6,000 04FHS-RSM1-GAN-TB 1.5 3.5 4.06 6,000 6 06FHS-RSM1-GAN-TB 2.5 4.5 5.06 6,000 8 08FHS-RSM1-GAN-TB 3.5 5.5 6.06 6,000 9 09FHS-RSM1-GAN-TB 4.0 6.0 6.56 6,000 Circuits Model No. 3 4 0.5 0.9 Material and Finish C 2.95 Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe) Housing: LCP, UL94V-0 Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Cover: PPS, UL94V-0 0.65 RoHS compliance This product displays (LF)(SN) on a label. Note: This products listed above are supplied on embossed-tape. A B Lead section dimensions of FPC 0.05 0.5N1 0.03 0.1 0.5N-1 0.03 0.5 0.04 0.03 0.35 0.2 2.5min 0.5 3.0 0.50.1 Reinforcing layer Note: N --- Number of circuits 2