REVISION CL DO NOT SCALE FROM THIS PRINT NOTES: SSM-1XX-XXX-XX-XX-XX-X-XX-XX 1. C REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: 1LB. No OF POSITIONS 3. COPLANARITY TO BE: -02 THRU -36 -DH: -36 THRU -28 POS: .008[0.20] (SEE NOTE 8) -02 THRU -27 POS: .006[0.15] -SV, SH: .006[0.15]. PLATING SPECIFICATION 4. PACKAGE IN TUBES PER SHT 3, TABLE 2. ALL OTHER POSITIONS BULK PACKAGE. -S: 30" SELECTIVE GOLD IN CONTACT 5. MAXIMUM CUT FLASH: .015[0.38]. AREA, MATTE TIN ON TAIL. 6. NOTCH OF PPP-12 TO BE ORIENTED TOWARD SAME END AS POSITION 1. -L: 10" SELECTIVE GOLD IN CONTACT 7. ROWS TO BE WITHIN .004[0.10] OF ONE ANOTHER. AREA, MATTE TIN ON TAIL. 8. -36 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY. -T: MATTE TIN ON CONTACT AND TAIL. 9. ENDWALL AFTER CUTTING: .033[0.84].005[0.13] -F: 3" SELECTIVE GOLD IN CONTACT 10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION AREA, MATTE TIN ON TAIL. IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS -STL: 30" SELECTIVE GOLD IN CONTACT MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. AREA, TIN/LEAD (90/10) ON TAIL. 11. FOR -SV TAIL STYLE: EVEN CUTS LOSE 2 POSITIONS PER CUT; ODD CUTS -H: 30" SELECTIVE GOLD IN CONTACT LOSE 1 POSITION PER CUT. AREA, 3" SELECTIVE GOLD ON TAIL. 12. IF POLARIZATION OCCURS AT CENTER POSITION(S) OF BODY, MOVE PICK & -LM: 10" SELECTIVE GOLD IN CONTACT PLACE PAD LEFT OR RIGHT TO NEXT AVAILABLE POSITION. AREA, MATTE TIN ON TAIL. -TM: MATTE TIN ON CONTACT AND TAIL. -FM: 3" SELECTIVE GOLD IN CONTACT OPTION -TR: TAPE AND REEL (SEE FIG 8, SHT 3) (29 POSITIONS MAX) OPTION -P: PICK AND PLACE PAD (ONLY AVAILABLE ON -SV, USE PPP-12, SEE FIG 6, SHT 2) (SEE NOTE 12) -K: POLYIMIDE FILM PAD (SEE FIG 5, SHT 2) (USE K-500-S00) (NOT AVAILABLE ON -SH AND -DH) POLARIZATION OPTION -XX: POSITION TO BE POLARIZED (USE PK-06-N, SEE FIG 7, SHT 2 FOR POLARIZATION POSITIONS) (NOT AVAILABLE FOR -BE OPTION) MOUNTING OPTION -LC: LOCKING CLIP (USE LC-05-TM, SEE NOTE 10) (FOR -SH AND -DH USE MOLDED TO POSITION BODIES) OPTION -BE: BOTTOM ENTRY (ONLY AVAILABLE ON -SV) (USE SSM-XX-S-BE) (SEE FIG 2, SHT 2) TAIL SPECIFICATION (NO OF POS x .100[2.54]) -.100[2.54] 02 .050 1.27 REF -SV: SINGLE VERTICAL (SEE FIG 1) (USE SSM-XX-S) -SH: SINGLE HORIZONTAL (SEE FIG 3, SHT 2) (USE SSM-XX-SH) -DH: DOUBLE HORIZONTAL (SEE FIG 4, SHT 2) (USE BCH-XX-D) (NO OF POS x .100[2.54]) .008[0.20] (CUT TOLERANCE, SEE NOTE 11) .005[0.13] (MOLDED BODY TOLERANCE) 36 .100 2.54 REF SSM-XX-S 01 C 35 2 MAX SWAY (EITHER DIRECTION) FLUSH TO .005[0.13] MAX .18 4.6 "A" CONTACT #1 +4 90 - 0 .290 7.37 REF C DETAIL 'D' SCALE 8 : 1 SEE NOTE 9 "A" C SEE NOTE 3 .050 1.27 (NO OF POS x .100[2.54]) -.200[5.08] LC-05-TM 'D' SECTION "A"-"A" FIG 1 -SV: SINGLE VERTICAL ROW (SSM-1XX-XXX-SV-LC SHOWN) 2 MAX SWAY (EITHER DIRECTION) UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01 [0.3] 2 .XXX: .005 [0.13] .XXXX: .0020 [0.051] MATERIAL: C +.002 +0.051 .043 - .005 1.09 - 0.127 -SV IN-PROCESS PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 INSULATOR: LCP, UL 94 VO, COLOR: BLACK CONTACT: PHOS BRONZE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .100[2.54] C.L. SURFACE MOUNT SOCKET STRIP DWG. NO. SSM-1XX-XXX-XX-XX-XX-X-XX-XX F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW BY: KOLB 09/11/1998 SHEET 1 OF 3 "R" REVISION CL SSM-XX-S-BE "R" .295 7.49 "S" .010[0.25] "S".010[0.25] .195 4.95 REF .395 10.03 REF 01 .1378 3.500 FIG 2 .019.010 0.480.254 FIG 5 -K: KAPTON PAD (SSM-110-XXX-SV-K SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) "R" = SEE FIG 1, SHEET 1 FOR OAL "S" = "R"/2 - .0689[1.750] -SV-BE: SINGLE VERTICAL ROW BOTTOM ENTRY (SSM-1XX-XXX-SV-BE SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) SEE NOTE 6 FIG 6 .020 0.51 REF 2 MAX SWAY (EITHER DIRECTION) .064 1.63 -SH IN-PROCESS .320 8.13 REF SSM-XX-SH "B" 01 LC-05-TM "B" +.010 +0.254 .433 - .020 11.00 - 0.508 .053 1.35 REF C .070 1.78 REF 36 -P: PICK AND PLACE PAD (SSM-110-XXX-SV-P SHOWN) -02 AND -03 POS NOT AVAILABLE WITH POLARIZATION -04 POS - CANNOT OFFER IF POLARIZATION IS POS 2 OR 3 -05 POS - CANNOT OFFER IF POLARIZATION IS POS 3 *MUST USE TR ON POS 2 & 3 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) "R" = SEE FIG 1, SHEET 1 FOR OAL "S" = IF NO OF POS IS EVEN: "R"/2 - .1975[5.017] IF NO OF POS IS ODD: "R"/2 - .2475[6.287] C 903 (TYP) .125 3.18 .050 1.27 REF POS 1 .063 1.60 C PPP-12 SEE NOTE 3 01 .015 0.38 FIG 3 -SH: SINGLE HORIZONTAL (SSM-136-XXX-SH-LC SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) .055 1.40 CONTACT #1 SECTION "B"-"B" 2 MAX SWAY (EITHER DIRECTION) 02 PK-06-N 36 SSM-136-XXX-SV-02 SHOWN 01 PK-06-N 72 02 SSM-136-XXX-SH-02 SHOWN 36 02 PK-06-N .078 1.98 .272 6.91 REF .167 4.24 BCH-XX-D CONTACT #1 CONTACT #2 72 "C" 02 .233 5.92 C .430.020 10.920.508 .055 1.40 REF "C" 01 FIG 4 .070 1.78 REF FLUSH TO .008[0.20] MAX (SEE NOTE 7) -DH: DOUBLE HORIZONTAL (SSM-1XX-XXX-DH-LC SHOWN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3) SSM-136-XXX-DH-02 SHOWN FIG 7 PROPRIETARY NOTE DO NOT SCALE DRAWING SECTION "C"-"C" .055 1.38 F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW 01 POLARIZATION (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. .100 2.54 71 71 -DH IN-PROCESS SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .100[2.54] C.L. SURFACE MOUNT SOCKET STRIP DWG. NO. SSM-1XX-XXX-XX-XX-XX-X-XX-XX BY: KOLB 09/11/1998 SHEET 2 OF 3 REVISION CL MATING SIDE OF CONNECTOR POS 1 CONTACT ENTRY SIDE FOR ASSEMBLY POS 1 SSM-110-XXX-SV-TR SHOWN USER DIRECTION OF UNREELING SSM-110-XXX-DH-TR SHOWN USER DIRECTION OF UNREELING SSM-110-XXX-SH-TR SHOWN USER DIRECTION OF UNREELING FIG 8 -TR: TAPE AND REEL SCALE 1:1 STANDOFF SIDE OF BODY SSM-1XX-XXX-SV-LC-P SHOWN (SSM-1XX-XXX-SV-LC-K SIMILAR) CORE LEAD IN SIDE OF BODY SSM-1XX-XXX-SV-LC SHOWN POS 1 SSM-1XX-XXX-DH-LC SHOWN CORE LEAD IN SIDE OF BODY 1ST POSITION WITH TUBE LOGO PROPRIETARY NOTE STANDOFF SIDE OF BODY SSM-1XX-XXX-SH-LC SHOWN FIG 9 TUBE VIEWS THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:2 F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .100[2.54] C.L. SURFACE MOUNT SOCKET STRIP DWG. NO. SSM-1XX-XXX-XX-XX-XX-X-XX-XX BY: KOLB 09/11/1998 SHEET 3 OF 3