Bulletin I27117 rev. C 03/02 SERIES IRK.136, .142, .162 THYRISTOR/DIODE and THYRISTOR/THYRISTOR NEW INT-A-pak Power Modules Features 135 A 140 A 160 A High Voltage Electrically Isolated by DBC Ceramic ( Al2 O 3 ) 3500 VRMS Isolating Voltage Industrial Standard Package High Surge Capability Glass Passivated Chips Modules uses High Voltage Power thyristor/diodes in three Basic Configurations Simple Mounting UL E78996 approved Applications DC Motor Control and Drives Battery Charges Welders Power Converters Lighting Control Heat and Temperature Control Major Ratings and Characteristics Parameters IT(AV) @ TC IT(RMS) CASE STYLE NEW INT-A-PAK IRK.136.. IRK.142.. IRK.162.. Units 135 140 160 A 85 85 85 C 300 310 355 A ITSM @ 50Hz 3200 4500 4870 A @ 60Hz 3360 4712 5100 A I2t @ 50Hz 51.5 102 119 KA2s @ 60Hz I2t 47 92.5 108 KA2s 515.5 1013 1190 KA2s VRRM 400 to 1600 V TJ range - 40 to 125 C www.irf.com 1 http://store.iiic.cc/ IRK.136, .142, .162 Series Bulletin I27117 rev. C 03/02 Electrical Specifications Voltage Ratings Type number Voltage VRRM/VDRM , Maximum repetitive VRSM/VDSM, Maximum non-repetitive Code peak reverse voltage peak reverse voltage V V IRK.136 04 400 500 IRK.142 08 800 900 IRK.162 12 1200 1300 14 1400 1500 16 1600 1700 IRRM / IDRM @ 125C mA 50 Forward Conduction Parameter IT(AV) Max. average on-state current IRK.136 IRK.142 IRK.162 Units Conditions 135 140 160 A C 180 conduction, half sine wave @ Case temperature 85 85 85 IT(RMS) Max. RMS on-state current 300 310 355 A as AC switch ITSM Maximum peak, one-cycle 3200 4500 4870 A t = 10ms on-state, non-repetitive 3360 4712 5100 t = 8.3ms reapplied surge current 2700 3785 4100 t = 10ms 2800 3963 4300 t = 8.3ms reapplied 51.5 102 119 47 92.5 108 t = 8.3ms reapplied 36.5 71.6 84 t = 10ms I2t I2t Maximum I2t for fusing Maximum I2t for fusing VT(TO)1 Low level value of threshold 33.3 65.4 76.7 515.5 1013 1190 0.86 0.83 0.8 1.05 1 0.98 2.02 1.78 1.67 1.65 1.43 1.38 1.57 1.55 1.54 KA2s t = 10ms No voltage 100% VRRM No voltage Sine half wave, Initial TJ = TJ max. 100% VRRM t = 8.3ms reapplied KA2s t = 0.1 to 10ms, no voltage reapplied V (16.7% x x IT(AV) < I < x IT(AV)), @ TJ max. voltage VT(TO)2 High level value of threshold (I > x IT(AV)), @ TJ max. voltage rt1 Low level value on-state m (16.7% x x IT(AV) < I < x IT(AV)), @ TJ max. slope resistance rt2 High level value on-state (I > x IT(AV)), @ TJ max. slope resistance V ITM = x IT(AV), TJ = 25C, 180conduction VTM Maximum forward voltage drop IH Maximum holding current 200 mA Anode supply = 6V initial IT = 30A, TJ = 25C IL Maximum latching current 400 mA Anode supply = 6V resistive load = 1 Gate pulse: 10V, 100s, TJ = 25C Switching tgd Typical delay time 1 tgr Typical rise time 2 tq Typical turn-off time 50 - 200 s TJ = 25oC Gate Current=1A dIg/dt=1A/s TJ = 25 C Vd=0,67% VDRM o ITM = 300 A; -dI/dt = 15 A/s; TJ = TJ max Vr = 50 V; dV/dt = 20 V/s; Gate 0 V, 100 www.irf.com 2 http://store.iiic.cc/ IRK.136, .142, .162 Series Bulletin I27117 rev. C 03/02 Blocking IRRM Maximum peak reverse and IDRM off-state leakage current VINS RMS isolation voltage 50 mA TJ = 125oC 3500 V 1000 V/s IRK.142 IRK.162 dV/dt critical rate of rise of off-state voltage 50Hz, circuit to base, all terminals shorted, t = 1s TJ = TJ max., exponential to 67% rated VDRM Triggering Parameter PGM IRK.136 Max. peak gate power PG(AV) Max. average gate power Units Conditions 12 W tp 5ms, TJ = TJ max. 3 W f=50Hz, TJ = TJ max. tp 5ms, TJ = TJ max. IGM Max. peak gate current 3 A -VGT Max. peak negative 10 V 4 V gate voltage VGT Max. required DC gate voltage to trigger IGT TJ = - 40C Anode supply = 6V, resistive 2.5 TJ = 25C load; Ra = 1 1.7 TJ = TJ max. Max. required DC gate 270 current to trigger 150 VGD Max. gate voltage 80 0.3 V IGD that will not trigger Max. gate current that will not trigger 10 mA 300 A/s di/dt Max. rate of rise of turned-on current mA TJ = - 40C Anode supply = 6V, resistive TJ = 25C load; Ra = 1 TJ = TJ max. @ TJ = TJ max., rated VDRM applied @ TJ = TJ max., ITM = 400A rated VDRMapplied Thermal and Mechanical Specifications Parameter IRK.136 IRK.142 IRK.162 Units Conditions TJ Max. junction operating -40 to 125 C Tstg temperature range Max. storage temperature -40 to 150 C RthJC range Max. thermal resistance, junction to case 0.18 RthCS Max. thermal resistance, case to heatsink T Mounting IAP to heatsink torque 10% busbar to IAP Approximate weight wt Case Style 0.18 0.16 K/W DC operation, per junction 0.05 K/W Mounting surface smooth, flat and greased Per module 4 to 6 4 to 6 200 (7.1) Nm A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. g(oz) New Int-A-Pak R Conduction (per Junction) (The following table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC) Devices Sinusoidal conduction @ TJ max. 180o 120o 90o 60o Rectangular conduction @ TJ max. 30o 180o 120o 90o 60o 30o IRK.136 0.007 0.01 0.013 0.0155 0.017 0.009 0.012 0.014 0.015 0.017 IRK.142 0.0019 0.0019 0.0020 0.0020 0.0021 0.0018 0.0022 0.0023 0.0023 0.0020 IRK.162 0.0030 0.0031 0.0032 0.0033 0.0034 0.0029 0.0036 0.0039 0.0041 0.0040 www.irf.com Units K/W 3 http://store.iiic.cc/ IRK.136, .142, .162 Series Bulletin I27117 rev. C 03/02 Ordering Information Table Device Code IRK T 162 1 2 3 / 16 4 1 - Module Type 2 - Circuit Configuration 3 - Current Rating: IT(AV) 4 - Voltage Code: Code x 100 = VRRM Outline Table Dimensions are in millimeters and [inches] IRKT IRKH IRKL 1 1 1 2 2 2 3 3 3 5 7 4 6 5 4 7 6 NOTE: To order the Optional Hardware see Bulletin I27900 www.irf.com 4 http://store.iiic.cc/ IRK.136, .142, .162 Series 13 0 IRK.136.. Series R thJC (D C ) = 0.18 K/W 12 0 11 0 C o nd uctio n Angle 10 0 90 30 60 90 80 120 180 70 0 20 40 60 80 10 0 12 0 14 0 M axim um Allow a b le C ase Tem perature ( C ) M a xim um Allo w a ble C ase Tem peratu re ( C ) Bulletin I27117 rev. C 03/02 13 0 IRK .1 3 6 .. Se ries R thJC (D C ) = 0 .1 8 K/W 12 0 11 0 C o n d u c tio n P e rio d 10 0 30 60 90 90 120 80 180 0 50 Averag e Forw ard C urren t (A ) RM S Lim it 100 C o nd uctio n Angle IRK .136.. Se ries Per Junction T J = 125 C 50 0 0 30 60 90 12 0 15 0 M axim um Averag e O n-state Pow er Loss (W ) M a xim um A vera ge O n-state Pow er Loss (W ) 180 120 90 60 30 150 DC 180 120 90 60 30 300 250 200 100 C o n d uc tio n P eriod IRK .136.. Se ries Per Junction TJ = 12 5 C 50 0 0 50 24 0 0 22 0 0 20 0 0 18 0 0 16 0 0 IRK.136.. Series Per Junction 12 0 0 1 10 1 00 1 50 2 00 2 50 Fig. 4 - On-State Power Loss Characteristics Peak Ha lf Sine W a ve O n -sta te C urrent (A) Pea k H alf Sin e W a ve O n -sta te C urren t (A ) In itial TJ = 125 C @ 60 Hz 0.00 83 s @ 50 Hz 0.01 00 s 14 0 0 RM S Lim it A vera ge O n -sta te C urrent (A) A t A ny R ate d Lo ad Co nditio n A n d W ith R ated V RRM A pplied Follo w ing Surge . 26 0 0 25 0 150 Averag e O n-state C urrent (A) 28 0 0 2 00 350 Fig. 3 - On-State Power Loss Characteristics 30 0 0 15 0 Fig. 2 - Current Ratings Characteristics 300 200 100 Averag e O n-state C urren t (A ) Fig. 1 - Current Ratings Characteristics 250 DC 70 10 0 Num b er O f Eq ua l Am p litud e H a lf C yc le C urre nt P ulses (N) Fig.5 - Maximum Non-Repetitive Surge Current www.irf.com 35 0 0 Maxim um No n Repetitive Surge Curre nt V ers us Pulse Train D uratio n. C ontrol O f Co nductio n M ay Not Be M aintained. In itial T J= 125 C No V oltag e Re ap plie d Ra te d V Re ap plie d 30 0 0 RRM 25 0 0 20 0 0 15 0 0 IRK.1 36.. Se ries Pe r Ju nction 10 0 0 0 .0 1 0.1 1 Pulse Tra in D ura tion (s) Fig. 6 - Maximum Non-Repetitive Surge Current 5 http://store.iiic.cc/ IRK.136, .142, .162 Series 450 S R th W K/ . 01 =0 /W A 4K e lt -D aR 50 W K /W 150 IRK.136.. Se rie s Pe r M odule TJ = 12 5 C W K /W 0 .6 100 0 .0 0 .4 200 K/ W 250 K/ K/ C onductio n Angle 25 08 300 0. 16 W 350 K/ 0. 180 120 90 60 30 12 400 0. 0. M axim um Tota l O n -sta te Pow e r Loss (W ) Bulletin I27117 rev. C 03/02 1 K/ W 0 0 50 100 150 200 250 Tota l R M S Outp ut C urre nt (A) 300 0 25 50 75 1 00 125 M axim um A llowab le Am bient Tem pera ture ( C ) Fig.7 - On State Power Loss Characteristics A hS R t 90 0 0. 04 60 0 0 .2 K/ K/ 50 75 W W a e lt -D 50 0 08 W 180 (Sine ) 180 (Re ct) 12 K/ 0. . 01 =0 0. 70 0 W 80 0 K/ K /W R M axim um To ta l P o we r Lo ss (W ) 1 0 00 40 0 0 .3 5 30 0 K /W 2 x IRK.136.. Series 0 . 6 K /W Single P hase Brid ge C onnected T J = 125 C 20 0 10 0 0 0 55 11 0 165 220 Total O utp ut C urre nt (A) 2 07 5 25 100 125 M axim um Allowab le Am bient Te m p era ture ( C ) Fig.8 - On State Power Loss Characteristics R th = 12 0 0 SA 0. el W ta R 6K / W -D 0 .1 60 0 K/ K/ W 08 0.1 K/ 0. 120 (Rec t) 90 0 04 M a xim u m To ta l Po w e r Lo ss (W ) 15 0 0 W 0 . 25 K /W 3 x IR K.1 3 6.. Serie s Th ree Ph a se B rid g e 0 .4 K / W C o n n ec te d 1 K /W T J = 12 5 C 30 0 0 0 10 0 20 0 3 00 To ta l O u tp u t C u rre nt (A ) 4 000 25 50 75 1 00 1 25 M axim u m A llo w a b le A m b ien t Tem p e ra tu re ( C ) Fig.9- On State Power Loss Characteristics www.irf.com 6 http://store.iiic.cc/ IRK.136, .142, .162 Series IRK.142.. Series R thJC (D C ) = 0.18 K/W 120 110 C o nd uctio n Angle 100 30 90 60 90 80 120 180 70 0 30 60 90 1 20 1 50 M axim um Allow a ble C ase Tem perature ( C ) 130 130 IR K.1 4 2 .. Se rie s R thJC (D C ) = 0 .1 8 K /W 120 110 C o n d uc tio n P e rio d 100 30 60 90 90 120 80 180 DC 70 0 50 200 25 0 Fig. 10 - Current Ratings Characteristics Fig. 11 - Current Ratings Characteristics 180 120 90 60 30 20 0 15 0 RMS Lim it 10 0 C o nd uc tio n Angle 50 IRK .142.. Series Per Junction TJ = 12 5 C 0 0 30 60 90 1 20 1 50 35 0 DC 180 120 90 60 30 30 0 25 0 20 0 15 0 R M S L im it C o nd u c tio n Pe rio d 10 0 IRK .1 4 2 .. Se rie s P er Ju n c tio n TJ = 12 5 C 50 0 0 50 Averag e O n-state C urren t (A ) A t A ny Rated Lo ad Co nditio n A n d W ith R ated V RRM A pplied Follo w ing Surge . In itial T J= 125 C @ 60 Hz 0.00 83 s @ 50 Hz 0.01 00 s 40 0 0 35 0 0 30 0 0 25 0 0 IRK.142.. Series Per Junction 15 0 0 1 10 1 50 2 00 2 50 Fig. 13 - On-State Power Loss Characteristics Pea k H alf Sin e W ave O n -sta te C urren t (A) 45 0 0 1 00 Averag e O n-state C urren t (A ) Fig. 12 - On-State Power Loss Characteristics Peak H a lf Sin e W a ve O n -stat e C urren t (A) 15 0 Averag e O n-state C urrent (A) 25 0 20 0 0 100 A vera ge Forw a rd C urrent (A) M axim um Averag e O n -state Pow er Loss (W ) M axim um A ve ra ge O n -sta te Po w er Lo ss (W ) M a xim um Allo w ab le C ase Tem peratur e ( C) Bulletin I27117 rev. C 03/02 10 0 N um b er O f Eq ua l A m p litud e H a lf Cy cle C urrent P ulses (N ) Fig.14 - Maximum Non-Repetitive Surge Current www.irf.com 5 00 0 M axim um Non Repetitive Surge Current V e rsus Pulse Train D uratio n. C o ntro l O f Co nductio n Ma y No t Be M aintained . Initia l T J= 125 C N o V oltag e Re a pp lied Ra te d V R R M Re a pp lie d 4 50 0 4 00 0 3 50 0 3 00 0 2 50 0 2 00 0 IRK.1 42.. Se rie s Pe r Ju nction 1 50 0 0 .0 1 0 .1 1 Pu lse Tra in D uration (s) Fig. 15 - Maximum Non-Repetitive Surge Current 7 http://store.iiic.cc/ IRK.136, .142, .162 Series 400 .0 1 =0 SA R t h /W 4K W W K /W e lt -D W aR 0 .6 0.0 K/ K/ K/ 25 08 200 0. 0 .4 W 0. W K/ 180 120 90 60 30 300 K/ 16 12 0. 0. M axim um Total O n-state Pow e r Lo ss (W ) Bulletin I27117 rev. C 03/02 K/W C o nductio n A n g le 1K /W IRK.142.. Se rie s Per M odule T J = 125 C 100 0 0 50 100 150 200 250 Tota l R M S O utp ut C urre nt (A) 300 25 50 75 10 0 12 5 M axim um A llowa ble A m b ient Tem perature ( C ) Fig.16 - On State Power Loss Characteristics hS R t 0. 04 /W 1K 2 00 R 100 To ta l O u tp ut C u rre nt (A ) lta 0 .2 e -D 0 .0 =0 0 W 2K /W 0.1 6K /W 2 x IR K .1 4 2.. Se ries Sin g le P h a se Brid g e C o n n ec te d T J = 12 5 C 20 0 A 40 0 K/ 0 .1 180 (Sine ) 180 (Re ct) 60 0 08 W 0. 80 0 K/ M a xim um Tota l P o w er Lo ss (W ) 1 00 0 5K /W 0 .6 K /W 0 3 00 25 50 75 10 0 12 5 M axim um A llowa ble A m b ient Tem perature ( C ) Fig.17 - On State Power Loss Characteristics S R th 0. 06 K/ W W e -D 0.0 8 00 / 2K 0. 120 (Rec t) 0.0 W 12 0 0 = K/ A 04 8K /W l ta R Ma xim u m Total Power Lo ss (W ) 16 0 0 0.1 K/ W 3 x IRK.142.. Series Three P hase Brid ge 0 .1 6 K /W C o nnected 0.2 K/W TJ = 125 C 4 00 0 0 5 0 10 0 1 5 0 20 0 25 0 30 0 35 0 4 0 0 450 0 Total O utp ut C urre nt (A) 25 50 75 10 0 12 5 M axim um A llowab le Am bie nt Tem perature ( C ) Fig.18- On State Power Loss Characteristics www.irf.com 8 http://store.iiic.cc/ IRK.136, .142, .162 Series IRK.162.. Series R thJ C (D C ) = 0.16 K/W 120 110 C o nd uc tio n Angle 100 90 30 60 90 80 120 180 70 0 30 60 90 1 20 150 180 M axim um Allow a b le C ase Tem perature ( C ) 130 1 30 IRK .162.. Series R thJC (DC ) = 0.16 K/W 1 20 1 10 1 00 C on d uctio n P e rio d 30 90 60 80 90 120 70 180 0 50 100 15 0 20 0 2 50 300 A vera ge O n -sta te C urrent (A) Fig. 19 - Current Ratings Characteristics Fig. 20 - Current Ratings Characteristics 4 00 IRK .162.. Se ries 3 50 Per Junction TJ = 125 C 3 00 180 120 2 50 90 60 2 00 30 RM S Lim it 1 50 1 00 50 C o nd uc tio n Angle 0 0 20 40 60 8 0 10 0 1 20 1 40 1 6 0 1 8 0 40 0 DC 180 120 90 60 30 35 0 30 0 25 0 20 0 RM S Lim it 15 0 C o n du c tio n Pe rio d 10 0 IRK.162.. Se ries Per Junctio n T = 125 C 50 J 0 0 30 Averag e O n-state C urren t (A) A t A ny R ate d Lo ad C on dition A n d W ith Rate d V RRM A pplie d Fo llow ing Surg e . 4 00 0 In itial T J = 125 C @ 60 Hz 0.00 83 s @ 50 Hz 0.01 00 s 3 50 0 3 00 0 2 50 0 2 00 0 IRK.162.. Series Per Jun ction 1 50 0 1 10 9 0 1 2 0 15 0 1 80 2 10 2 4 0 2 7 0 Fig. 22 - On-State Power Loss Characteristics Peak Ha lf Sine W av e O n -sta te C urrent (A) 4 50 0 60 Averag e O n -sta te C urren t (A ) Fig. 21 - On-State Power Loss Characteristics Pea k H alf Sin e W a ve O n-state C urren t (A ) DC 60 Averag e Fo rw ard C urrent (A) M a xim um A vera g e O n -sta te Pow e r Lo ss (W ) M axim um Averag e O n-state Pow er Loss (W ) M a xim um A llow ab le C a se Tem p era ture ( C ) Bulletin I27117 rev. C 03/02 10 0 Num b er O f Eq ua l Am p litud e H a lf C ycle C urrent P ulse s (N) Fig.23 - Maximum Non-Repetitive Surge Current www.irf.com 50 0 0 M axim um Non Repetitive Surge Current V e rsus Pulse Train D uratio n. C o ntro l O f Co nductio n Ma y No t Be M aintained . In itia l T J= 125 C No V olta ge Re ap plied Ra te d V R R M Re ap plie d 45 0 0 40 0 0 35 0 0 30 0 0 25 0 0 20 0 0 IRK .162.. Series Per Junction 15 0 0 0.0 1 0 .1 1 Pu lse Tra in D uration (s) Fig. 24 - Maximum Non-Repetitive Surge Current 9 http://store.iiic.cc/ IRK.136, .142, .162 Series 600 S R th A 0. 0 W = K/ W 2 K/ W W ta el -D 6K /W 0.2 R C onductio n An gle K /W IRK.162.. Se rie s Pe r M odule T J = 125 C 100 04 K/ 0 .1 200 K/ W 0.1 300 08 K/ 400 0. 06 180 120 90 60 30 500 0. 0. M a xim um T ota l O n-state Pow e r Loss (W ) Bulletin I27117 rev. C 03/02 0 0 100 200 400 0 300 Tota l RM S O utp ut C urre nt (A) 25 50 75 100 125 M axim um A llowab le Am b ie nt Tem p era ture ( C ) Fig.25 - On State Power Loss Characteristics 0. 8 00 0.2 0 .4 W R 3 00 K/ ta el 0.3 -D 4 00 W W 5 00 K/ K/ 180 (Sine ) 180 (Re ct) W 04 6 00 12 K/ 0. 0. = 7 00 08 A hS Rt M axim um Total P ower Lo ss (W ) 9 00 K /W K /W 2 x IRK.162.. Series 0 .6 K /W Single Phase Brid ge 1 K /W C onnected T J = 125 C 2 00 1 00 0 0 50 100 15 0 20 0 25 0 Tota l O utput C urrent (A) 0 3 00 25 50 75 10 0 12 5 M axim um A llo wa ble A m b ient Tem perature ( C ) Fig.26 - On State Power Loss Characteristics 04 A K/ 1 2 50 S R th 0. W W K/ K/ e lt -D 2 K /W a 7 50 0 .1 2 120 (Rect) 08 0. 0 0. 1 0 00 = W R M axim u m To tal Po wer Loss (W ) 1 5 00 0 .2 5 00 K /W 3 x IRK.162.. Series 0 .3 K /W Three Phase Brid ge 0. C onnected 6 K /W T J = 12 5 C 2 50 0 0 50 1 0 0 15 0 2 00 25 0 3 0 0 3 5 0 4 00 4050 Tota l Output C urrent (A) 25 50 75 100 125 M a xim um A llo w a b le A m b ie n t Te m p era tu re ( C ) Fig.27- On State Power Loss Characteristics www.irf.com 10 http://store.iiic.cc/ IRK.136, .142, .162 Series Bulletin I27117 rev. C 03/02 10000 Instantaneous On-state Current (A) Instantaneous On-state Current (A) 10000 1000 T J = 25C T J= 125C 100 10 IRK.136.. Series Per Junction 1000 T = 125C J 100 10 IRK.142.. Series Per Junction 1 1 0 1 2 3 4 0 5 2 3 4 5 Instantaneous On-state Voltage (V) Fig.28 - On State Voltage Drop Characteristics Fig.29 - On State Voltage Drop Characteristics 1 Transient Thermal Impedance Z thJC Instantaneous On-state Current (A) 1 Instantaneous On-state Voltage (V) 10000 1000 TJ = 25C TJ = 125C 100 10 IRK.162.. Series Per Junction 1 0 (DC Operation) 0.1 0.01 IRK.136.. Series 0.01 0.1 1 Square Wave Pulse Duration (s) 10 Fig.31 - Thermal Impedance ZthJC Characteristics 1 Transient Thermal Impedance Z thJC 1 Steady State Value (DC Operation) 0.1 IRK.142.. Series 0.01 0.01 Steady State Value 0.001 0.001 1 2 3 4 5 Instantaneous On-state Voltage (V) Fig.30 - On State Voltage Drop Characteristics Transient Thermal Impedance Z thJC TJ = 25C 0.1 1 Square Wave Pulse Duration (s) 10 Fig.32 - Thermal Impedance ZthJC Characteristics www.irf.com Steady State Value (DC Operation) 0.1 IRK.162.. Series 0.01 0.01 0.1 1 Square Wave Pulse Duration (s) 10 Fig.33 - Thermal Impedance ZthJC Characteristics 11 http://store.iiic.cc/ IRK.136, .142, .162 Series Bulletin I27117 rev. C 03/02 10 Rec ta ng ula r g a te p ulse a )Re c o m m end e d lo a d line fo r ra ted d i/d t: 20 V, 20 o hm s tr = 0.5 s, tp >= 6 s b )Re c o m m end e d loa d line fo r <= 30% ra ted d i/d t: 15 V , 40 o hm s tr = 1 s, tp >= 6 s (1) (2) (3) (4) PG M PG M PG M PG M = = = = 200 W , tp = 300 s 60 W , tp = 1 m s 30 W , tp = 2 m s 12 W , tp = 5 m s (4) (3 ) (2) (a) (b ) TJ = -40 C TJ = 12 5 C 1 TJ = 25 C In stan ta neous G a te V olta ge (V ) 1 00 (1) VG D IG D 0 .1 0 .0 0 1 0.0 1 IR K.1 3 6 ..1 4 2 ..1 6 2 .. Se ries 0 .1 Frequen cy Lim ited by PG (AV ) 1 10 100 1 00 0 Instan ta n eous G a te C urren t (A ) Fig. 34 - Gate Characteristics Data and specifications subject to change without notice. This product has been designed and qualified for Multiple Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/02 www.irf.com 12 http://store.iiic.cc/