SmartPro 230V 1kVA 900W Line-Interactive Sine
Wave UPS, 2U Rack/Tower, Network Card
Options, LCD, USB, DB9, 6 Outlets
MODEL NUMBER: SMX1000RT2U
Description
The SMX1000RT2U SmartPro 230V 1kVA 900W Line-Interactive Sine Wave UPS provides battery
backup and AC power protection against blackouts, brownouts, power surges and line noise that can
damage electronics or destroy data. Ideal for backing up point-of-sale applications, VoIP systems and
small business networks, the SMX1000RT2U switches to battery mode in milliseconds to keep your
connected equipment running long enough to save files and shut down safely with no data loss.
Featuring six C13 outlets (four switchable) and a C14 inlet that accepts a user-supplied AC power cord,
the SMX1000RT2U has an internal battery that provides 11.9 minutes of support at half load and 3.6
minutes at full load. A front-panel LCD screen lets you configure settings and monitor important data, such
as load level, voltage, battery charge and estimated runtimes.
Automatic voltage regulation (AVR) maintains 230V nominal output over an input range of 182V to 278V
without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents
damage. A 350-joule surge suppression rating protects your equipment from harmful power surges. With
Tripp Lite’s free downloadable PowerAlert® software, the SMX1000RT2U enables safe unattended
system shutdown and file saves in case of a prolonged power failure. Adding an optional Network
Management Card permits remote management of the UPS.
Features
Protects Mission-Critical Rack-Mounted Equipment
Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small
business networks
●
Audible alarm signals loss of utility power, overload, low battery and fault conditions
●
Highlights
Corrects under- and
overvoltages from 182V to 278V
●
6 C13 outlets—4 switchable via
network interface
●
Network power management
and control capability
●
Interactive LCD monitoring
screen
●
11.9 min. runtime at half load;
3.6 min. at full load
●
Package Includes
SMX1000RT2U SmartPro 230V
1kVA 900W Line-Interactive
Sine Wave UPS
●
USB cable
●
DB9 cable
●
EPO cable
●
(2) IEC-320 C13-to-C14 power
cables
●
Mounting hardware
●
Owner’s manual
●
1 / 6
Specifications
6 C13 outlets
●
C14 inlet accepts user-supplied AC power cord with country-specific plug
●
350-joule surge suppression rating
●
Reliable Battery Backup
Supports half load up to 11.9 min. and full load up to 3.6 min.
●
Internal batteries designed for hot-swap field replacement
●
97% line-power efficiency rating saves money in energy costs
●
2 Load Banks with Switchable Outlets
Can control 4 outlets remotely to reboot equipment or shed nonessential loads
●
Automatic Voltage Regulation (AVR)
Maintains 230V nominal output over input range of 182V–278V without using battery power
●
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s
performance
●
Interactive LCD Screen
Front-panel LCD signals voltage, battery and load statuses
●
Supports multiple advanced user setup and operating preferences
●
Rotates for easy viewing in rack-mount or tower configurations
●
Optional Network Management Cards
Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and
SNMPWEBCARD
●
Communications Ports
USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite’s Power Alert
software (available via free download at www.tripplite.com/poweralert)
●
EPO port supports emergency shutdown in large facilities
●
Versatile Installation Options
Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
●
Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
●
Mounts in upright tower position with optional 2-9USTAND accessory
●
2 / 6
MODEL TEXT
Key Benefit Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts,
brownouts, surges and line noise. Ideal solution for point-of-sale applications, VoIP systems and small business
networks.
OUTPUT
Output Volt Amp Capacity (VA) 1000
Output kVA Capacity (kVA) 1
Output Watt Capacity (Watts) 900
Power Factor 0.9
Nominal Output Voltage(s)
Supported 220V; 230V; 240V
Nominal Voltage Details 230V nominal output in battery mode
Frequency Compatibility 50 / 60 Hz
Frequency Compatibility Details Automatic frequency selection
Output Voltage Regulation (Line
Mode) +6%, -11%
Output Voltage Regulation (Battery
Mode) +/- 5%
Output Receptacles (6) C13
Included Output Power Cables Includes 2 C13 to C14 output power cables
Load Management Receptacles Two switchable two-outlet C13 load banks
Hot-Swap PDU options PDUBHV10 (2U / 8 C13 outlets)
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery
Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 4.8A
Nominal Input Voltage(s) Supported 230V AC
UPS Input Connection Type C14 inlet
UPS Input Connection Description IEC320-C14 input connection accepts a variety of user supplied detachable C13 output cordsets to match country or
site-specific power sources
Input Circuit Breakers 10A
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 3.6 min. (900w)
3 / 6
Half Load Runtime (min.) 11.9 min (450w)
DC System Voltage (VDC) 24
Battery Recharge Rate (Included
Batteries) Less than 4.5 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery
Cartridge See Tripp Lite RBC selector guide
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime No
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 182 to 278
Overvoltage Correction Input voltages between 244 and 278 are reduced by 12%
Undervoltage Correction Input voltages between 182 and 206 are boosted by 12%
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data,
plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for
detailed LCD configuration and monitoring options)
Switches 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option
available
Audible Alarm Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown
conditions
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 350
UPS AC Suppression Response
Time Instantaneous
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Included Mounting Accessory
Description 4 post rackmount installation accessories included
Installation Form Factors Supported
with Optional Accessories 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND); 2-4 post front rail
rackmount (UPSHDEARKIT)
Primary Form Factor Rackmount
UPS Power Module Dimensions
(hwd, in.) 3.5 x 17.5 x 13.5
UPS Power Module Dimensions
(hwd, cm) 8.89 x 44.45 x 34.29
4 / 6
Rack Height (U Spaces) 2
Minimum Required Rack Depth
(inches) 15.8
Minimum Required Rack Depth (cm) 40.13
UPS Power Module Weight (lbs.) 34
UPS Power Module Weight (kg) 15.42
UPS Shipping Dimensions (hwd /
in.) 9 x 24 x 20.2
UPS Shipping Dimensions (hwd /
cm) 22.86 x 60.96 x 51.31
Shipping Weight (lbs.) 36
Shipping Weight (kg) 16.3
Cooling Method Fan
UPS Housing Material Steel
Minimum Required Rack Depth
(mm) 401
Primary UPS Height (mm) 89
Primary UPS Width (mm) 444
Primary UPS Depth (mm) 343
Shipping Height (mm) 229
Shipping Width (mm) 610
Shipping Depth (mm) 513
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 100
Battery Mode BTU / Hr. (Full Load) 918
AC Mode Efficiency Rating (100%
Load) 97%
COMMUNICATIONS
Communications Interface DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)
Network Management Cards SNMPWEBCARD; TLNETCARD; WEBCARDLX
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at
http://www.tripplite.com/poweralert
5 / 6
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time 2-4 milliseconds
Low Voltage Transfer to Battery
Power (Setpoint) 182
High Voltage Transfer to Battery
Power (Setpoint) 278
SPECIAL FEATURES
Grounding Lug Back panel grounding lug
Cold Start (Startup in Battery Mode
During a Power Failure) Cold-start operation supported
High Availability UPS Features Hot swappable batteries
Green Energy-Saving Features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
CERTIFICATIONS
UPS Certifications CE; ROHS (Restriction of Hazardous Substances); Tested to GOST (Russia)
UPS Certification Details IEC 62040-1, IEC 62040-2 Class A EMI
WARRANTY
Product Warranty Period
(International) 2-year limited warranty
Product Warranty Period (Mexico) 2-year limited warranty
Product Warranty Period (Puerto
Rico) 2-year limited warranty
6 / 6
