Phototransistors PNZ163NC (PN163-(NC)) Silicon NPN Phototransistor 3.50.3 Gate the rest 2.4 1.1 0.8 max. 1.1 0.8 Unit : mm For optical control systems Features High sensitivity 3.00.3 o1.1 R0.5 1.950.25 1.40.2 0.9 0.5 Fast response : tr = 4 s (typ.) 12 min. Not soldered 2.15 max. Adoption of visible light cutoff resin Ultraminiature, thin side-view type package 2-0.50.15 2 2.54 0.30.15 1 Absolute Maximum Ratings (Ta = 25C) Parameter Symbol Ratings Unit Collector to emitter voltage VCEO 20 V Collector current IC 20 mA Collector power dissipation PC 50 mW Operating ambient temperature Topr -25 to +85 C Storage temperature Tstg -30 to +100 C 1: Collector 2: Emitter Electro-Optical Characteristics (Ta = 25C) Parameter Symbol Dark current ICEO Sensitivity to infrared emitters Peak sensitivity wavelength Acceptance half angle *2 min typ VCE = 10V, H = 15W/cm2 6 max Unit 0.2 A 40 A P VCE = 10V 850 nm Measured from the optical axis to the half power point 25 deg. Rise time tr*2 VCC = 10V, ICE(L) = 5mA 4 s Fall time tf*2 RL = 100 4 Collector saturation voltage *1 SIR *1 Conditions VCE = 10V VCE(sat) ICE(L) = 3A, H = 15W/cm2 s 0.5 V Measurements were made using infrared light ( = 940 nm) as a light source. Switching time measurement circuit Sig.IN VCC (Input pulse) Sig.OUT (Output pulse) RL ;;;; ;; 50 90% 10% td tr tf td : Delay time tr : Rise time (Time required for the collector photo current to increase from 10% to 90% of its final value) tf : Fall time (Time required for the collector photo current to decrease from 90% to 10% of its initial value) Note) The part number in the parenthesis shows conventional part number. 1 Phototransistors PNZ163NC PC -- Ta ICE(L) -- VCE 30 20 10 0 20 40 60 Ambient temperature 80 2.0 1.5 500 lx 1.0 0.5 0 100 L = 1000 lx Ta (C ) 100 lx 0 4 8 1 10 -1 40 Ambient temperature 60 80 50 40 30 20 30 S (%) 40 80 80 60 40 0 600 120 50 60 VCC = 10V Ta = 25C 900 1000 1100 1200 VCC = 10V Ta = 25C 10 4 10 3 10 2 RL = 1k 10 500 100 70 80 800 tf -- ICE(L) tf (s) 40 700 Wavelength (nm) Ta (C ) 10 3 tr (s) 60 VCE = 10V Ta = 25C tr -- ICE(L) 20 Rise time 70 0 10 4 Relative sensitivity S (%) 90 80 10 3 L (lx) 20 Ambient temperature 100 10 2 10 Illuminance Spectral sensitivity characteristics 1 10 -1 - 40 100 1 100 10 Ta (C ) 10 10 -1 VCE (V) VCE = 10V T = 2856K Directivity characteristics 0 1 10 -2 24 Relative sensitivity ICE(L) (mA) Collector photo current ICEO (nA) Dark current 10 20 20 VCE = 10V Ta = 25C T = 2856K 10 ICE(L) -- Ta 10 2 VCE = 10V 0 16 Collector to emitter voltage ICEO -- Ta 10 -2 - 20 12 Fall time 0 - 20 2.5 ICE(L) (mA) 40 Ta = 25C T = 2856K Collector photo current ICE(L) (mA) 50 10 2 ICE(L) -- L 10 2 3.0 Collector photo current Collector power dissipation PC (mW) 60 10 2 RL = 1k 10 500 100 1 1 90 10 -1 10 -2 10 -1 1 Collector photo current 2 10 10 2 ICE(L) (mA) 10 -1 10 -2 10 -1 1 Collector photo current 10 10 2 ICE(L) (mA) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR