MCH3421 Ordering number : ENN7997 MCH3421 N-Channel Silicon MOSFET General-Purpose Switching Device Applications Features * * * Low ON-resistance. Ultrahigh-speed switching. 4V drive. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 100 Gate-to-Source Voltage VGSS 20 V ID 0.8 A Drain Current (DC) Drain Current (Pulse) IDP PD Allowable Power Dissipation V PW10s, duty cycle1% 3.2 A Mounted on a ceramic board (900mm20.8mm) 0.9 W Channel Temperature Tch 150 C Storage Temperature Tstg --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS IDSS IGSS Unit max 100 V 1 A 10 A 2.6 V RDS(on)1 RDS(on)2 ID=400mA, VGS=10V ID=400mA, VGS=4V 0.68 0.89 0.85 1.2 VDS=20V, f=1MHz VDS=20V, f=1MHz 165 13 pF VDS=20V, f=1MHz See specified Test Circuit. 8.0 pF 7 ns See specified Test Circuit. 3 ns See specified Test Circuit. 22 ns See specified Test Circuit. 10 ns Output Capacitance Coss Reverse Transfer Capacitance Crss Turn-ON Delay Time td(on) tr Fall Time typ VGS=16V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=400mA Ciss Turn-OFF Delay Time ID=1mA, VGS=0 VDS=100V, VGS=0 Ratings min VGS(off) yfs Input Capacitance Rise Time Conditions td(off) tf 1.2 0.5 Marking : KW 1.0 S pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N2504 TS IM TB-00000253 No.7997-1/4 MCH3421 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Total Gate Charge Qg VDS=50V, VGS=10V, ID=0.8A 4.8 nC Gate-to-Source Charge Qgs VDS=50V, VGS=10V, ID=0.8A 0.9 nC Gate-to-Drain "Miller" Charge Qgd VDS=50V, VGS=10V, ID=0.8A 0.9 Diode Forward Voltage VSD IS=0.8A, VGS=0 Package Dimensions unit : mm 2167A 1.2 VDD=50V VIN 10V 0V 0.15 3 ID=0.4A RL=125 1.6 D 0.25 2 1 VOUT PW=10s D.C.1% 0.07 2.1 VIN 0.65 V Switching Time Test Circuit 0.3 0.25 nC 0.86 G 2.0 3 MCH3421 P.G 0.85 1 : Gate 2 : Source 3 : Drain 2 SANYO : MCPH3 (Top view) ID -- VDS ID -- VGS 2.0 VDS=10V V 6.0 1.8 0.4 1.2 1.0 0.8 0.6 Ta= 2 0.4 0.2 C 0.6 1.4 5 C Drain Current, ID -- A VGS=3.0V V 4.0 V 10. 5.0 1.6 3.5 Drain Current, ID -- A 0.8 V 0V 8.0 V 1.0 S 75C 1 50 --25 (Bottom view) 0.2 0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Drain-to-Source Voltage, VDS -- V Static Drain-to-Source On-State Resistance, RDS(on) -- 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 2 4 6 8 10 12 14 16 Gate-to-Source Voltage, VGS -- V 18 1.0 1.5 20 IT05997 2.0 2.5 3.0 3.5 Gate-to-Source Voltage, VGS -- V 4.0 IT05996 RDS(on) -- Ta 1.8 Ta=25C ID=0.4A 1.8 0.5 IT05995 RDS(on) -- VGS 2.0 Static Drain-to-Source On-State Resistance, RDS(on) -- 0 1.6 1.6 1.4 1.2 V 4 S= 1.0 VG A, .4 =0 ID 0.8 V 10 S= , VG 4A 0. I D= 0.6 0.4 0.2 0 --60 --40 --20 0 20 40 60 80 100 Ambient Temperature, Ta -- C 120 140 160 IT05998 No.7997-2/4 MCH3421 yfs -- ID 5 VGS=0 3 2 2 = Ta 1.0 5 --2 C C 75 C 25 7 5 3 1.0 7 5 3 2 Ta= 75C 25 C --25 C 3 0.1 7 5 2 3 0.1 0.01 0.01 0.2 2 2 3 5 7 0.1 2 3 5 7 1.0 2 Drain Current, ID -- A 3 5 0.8 1.0 1.2 IT06000 Ciss, Coss, Crss -- VDS 5 f=1MHz 3 Ciss 2 3 td(off) 2 tf 10 7 td(on) 5 tr 3 100 7 5 Ciss, Coss, Crss -- pF 5 0.6 Diode Forward Voltage, VSD -- V VDD=50V VGS=10V 7 0.4 IT05999 SW Time -- ID 100 Switching Time, SW Time -- ns IF -- VSD 5 VDS=10V Forward Current, IF -- A Forward Transfer Admittance, yfs -- S 7 3 2 Coss 10 7 5 Crss 3 2 2 1.0 0.1 1.0 2 3 5 7 1.0 8 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V 7 5 3 2 VDS=50V ID=0.8A 6 4 2 0 0 1 2 3 4 5 6 Total Gate Charge, Qg -- nC IT06003 PD -- Ta 1.0 5 10 15 20 25 Drain-to-Source Voltage, VDS -- V VGS -- Qg 10 Allowable Power Dissipation, PD -- W 0 2 IT06001 Drain Current, ID -- A 1.0 7 5 3 2 ASO <10s 10 0 s 1m s 10 ms IDP=3.2A ID=0.8A DC op 10 0m s tio n( Ta =2 era 0.1 7 5 3 2 0.01 7 5 3 2 30 IT06002 Operation in this area is limited by RDS(on). 5 C) Ta=25C Single pulse Mounted on a ceramic board (900mm20.8mm) 0.001 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 Drain-to-Source Voltage, VDS -- V 2 IT07674 0.9 M ou 0.8 nt ed on ac er 0.6 am ic bo ar 0.4 d (9 00 m m2 0. 8m 0.2 m ) 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT07671 No.7997-3/4 MCH3421 Note on usage : Since the MCH3421 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.7997-4/4