Phototransistors PNZ102 (PN102) Silicon NPN Phototransistor Unit : mm o4.60.15 Glass lens 6.30.3 For optical control systems Features High sensitivity 12.7 min. Wide spectral sensitivity, suited for detecting GaAs LEDs Low dark current : ICEO = 5 nA (typ.) 3-o0.450.05 Fast response : tr, tf = 3 s (typ.) 2.540.25 0 1. Base pin for easy circuit design 1. 3 0 0. 45 15 2 0. TO-18 standard type package 3 2 1 Absolute Maximum Ratings (Ta = 25C) Parameter 1: Emitter 2: Base 2: Collector o5.75 max. Symbol Ratings Unit Collector to emitter voltage VCEO 30 V Collector to base voltage VCBO 40 V Emitter to collector voltage VECO 5 V Emitter to base voltage VEBO 5 V Collector current IC 50 mA Collector power dissipation PC 150 mW Operating ambient temperature Topr -25 to +85 C Storage temperature Tstg -30 to +100 C Electro-Optical Characteristics (Ta = 25C) Parameter Symbol typ max 5 300 1.5 3.5 ICEO VCE = 10V Collector photo current ICE(L) VCE = 10V, L = 100 lx*1 Unit nA mA Peak sensitivity wave length P VCE = 10V 800 nm Acceptance half angle Measured from the optical axis to the half power point 10 deg. tr, tf*2 VCC = 10V, ICE(L) = 5mA, RL = 100 Collector saturation voltage *2 min Dark current Response time *1 Conditions VCE(sat) ICE(L) = 1mA, L = 500 lx*1 s 3 0.2 0.4 V Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source. Switching time measurement circuit Sig.IN VCC (Input pulse) Sig.OUT RL ;;;; ;; 50 (Output pulse) 90% 10% td tr tf td : Delay time tr : Rise time (Time required for the collector photo current to increase from 10% to 90% of its final value) tf : Fall time (Time required for the collector photo current to decrease from 90% to 10% of its initial value) Note) The part number in the parenthesis shows conventional part number. 1 Phototransistors PNZ102 IC -- VCE 20 80 30A Ta = 25C 25A 16 20A 12 15A PC = 150mW 8 10A 4 40 IB = 5A Ta = 25C T = 2856K 500 lx 1000 lx ICE(L) (mA) IC (mA) 120 Collector current PC (mW) Collector power dissipation 160 ICE(L) -- VCE 20 Collector photo current PC -- Ta 200 16 400 lx 300 lx 12 PC = 150mW 200 lx 8 150 lx 100 lx 4 L = 50 lx 0 - 20 0 20 40 60 80 0 100 Ambient temperature Ta (C ) 0 10 10 -1 10 10 10 2 VCE = 10V T = 2856K ICE(L) (mA) 10 2 10 1 Illuminance L (lx) 0 40 80 L = 500 lx 200 lx 10 100 lx 1 - 40 120 Ambient temperature Ta (C ) Spectral sensitivity characteristics 0 40 80 tr -- ICE(L) Directivity characteristics 10 3 VCC = 10V Ta = 25C 40 400 600 800 1000 Wavelength (nm) 2 tr (s) 10 2 60 40 RL = 1k 500 10 100 1 20 20 0 200 80 Rise time S (%) 60 Relative sensitivity Relative sensitivity S (%) Ta = 25C 80 120 Ambient temperature Ta (C ) 100 100 30 ICE(L) -- Ta 10 2 VCE = 10V 10 -1 - 40 10 3 20 Collector to emitter voltage VCE (V) Collector photo current ICEO (nA) 1 Dark current ICE(L) (mA) Collector photo current 10 3 VCE = 10V Ta = 25C T = 2856K 1 0 ICEO -- Ta 10 10 -2 30 Collector to emitter voltage VCE (V) ICE(L) -- L 10 2 20 0 0 30 20 10 Angle 0 10 (deg.) 20 30 10 -1 10 -1 1 10 10 2 Collector photo current ICE(L) (mA) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR