Memory Module Specifications KVR800D2S6/1G 1GB 1Rx8 128M x 64-Bit DDR2-800 CL6 200-Pin SODIMM DESCRIPTION SPECIFICATIONS This document describes ValueRAM's 128M x 64-bit Clock Cycle Time (tCK) 2.5ns (min.) / 8ns (max.) (1GB) DDR2-800 CL6 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 128M x 8-bit Row Cycle Time (tRCmin) 60ns (min.) Refresh to Active/Refresh Command Time (tRFCmin) 127.5ns (min.) Row Active Time (tRASmin) 45ns (min.) / 70,000 (max.) Single Power Supply of +1.8V (+/- .1V) Power Operating 1.224 W (Approx.*) UL Rating 94 V - 0 FBGA components. This 200-pin SODIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as follows: Note: The module described in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. Figure 1: KVR800D2S6/1G 200-Pin SODIMM (units = millimeters) Document No. VALUERAM0602-001.C00 08/25/11