C1300 PXO
Vectron International · www.vectron.com
v.2009-09-15-05 · page 1 of 4 SEM
Vectron International
Headquarters
267 Lowell Road
Hudson, New Hampshire 03051
+1-888-328-7661 tel
+1-888-329-8328 fax
Vectron International LLC.
100 Watts Street
Mount Holly Springs, PA 17065
USA
+1-717-486-3411 tel
+1-717-486-5920 fax
Vectron international GmbH & Co. KG
Landstrasse
D-74924 Neckarbischofsheim
Germany
+49-07268-801-0 tel
+49-07268-801-281 fax
Vectron Asia Pacific Sales Office
Unit 3119 31st Floor, Jin Mao Tower, 88
Century Boulevard, Shanghai,
P.R. China 200120
+86 21 28909740 tel.
+86 21 28909240 fax
Frequency Range 1 to 800 MHz (ACMOS and TTL outputs
available up to 125 MHz. LVPECL and LVDS
output frequencies above 220 MHz are achieved
through the use of a PLL multiplier.)
Standard Frequencies 19.44, 32.768, 44.736, 51.84, 77.76, 155.52, 622.08 MHz
Frequency Stabilities
1
Parameter Min Typ Max Units Condition Ordering Code
5
Operating temperature range -100 +100 ppm 0 … +70°C C104
(referenced to +25°C) -50 +50 ppm 0 … +70°C
C505
-25 +25 ppm 0 … +70°C
C255
-15 +15 ppm 0 … +70°C
C155
-100 +100 ppm -40 … +85°C F104
-50 +50 ppm -40 … +85°C F505
-25 +25 ppm -40 … +85°C F255
-100 +100 ppm -55 … +125°C M104
-50 +50 ppm -55 … +125°C M505
Initial accuracy (do not use with -15 +15 ppm @ 25°C
T155
overall tolerance code below) -25 +25 ppm @ 25°C
T255
-50 +50 ppm @ 25°C
T505
-100 +100 ppm @ 25°C
T104
Parameter
Min Typ Max Units Condition Ordering Code
5
Overall tolerance (includes operating -100 +100 ppm 0 … +70°C TC104
temperature and initial accuracy)
7
-50 +50 ppm 0 … +70°C TC505
-25 +25 ppm 0 … +70°C TC255
-20 +20 ppm 0 … +70°C TC205
-100 +100 ppm -40 … +85°C TF104
-50 +50 ppm -40 … +85°C TF505
-25 +25 ppm -40 … +85°C TF255
-100 +100 ppm -55 … +125°C TM104
-65 +65 ppm -55 … +125°C TM605
Additional stability parameters:
vs. Supply voltage change
vs. Load change
vs. Aging / 1st year
vs. Aging / year (following years)
-2
-1
-3
-1
+2
+1
+3
+1
ppm
ppm
ppm
ppm
V
S
± 5%
Load ± 5%
Supply Voltage (Vs)
Parameter Min Typ Max Units Condition Ordering Code
5
Supply voltage 4.75 5.0 5.25 VDC SV050
Current consumption 15 mA ACMOS or TTL 1.0 to 23.9 MHZ
(+5 VDC) 20 mA ACMOS or TTL 24 to 49.9 MHz
40 mA ACMOS or TTL 50 to 125.00 MHz
Supply voltage 3.135 3.3 3.465 VDC SV033
Supply voltage 2.375 2.5 2.625 VDC SV025
Current consumption 6 mA ACMOS 1.0 to 14.90 MHZ
(+3.3 VDC or +2.5 VDC) 8 mA ACMOS 15.0 to 39.9 MHz
12 mA ACMOS 40.0 to 59.9 MHz
16 mA ACMOS 60.0 to 84.9 MHz
40 mA ACMOS 85.0 to 125.0 MHz
75 mA LVPECL or LVDS No load <200 MHz
Typical Applications Features
Military Systems 9X14 J Leaded Surface Mount Package
Avionics and Instrumentation Reflow Process Compatible
Test Equipment ACMOS, TTL, LVPECL and LVDS
Medical Equipment MIL-PRF-55310 Class B Screening (optional)
Military Operating Temperature Range (optional)
C1300 PXO
Vectron International · www.vectron.com
v.2009-09-15-05 · page 2 of 4 SEM
Vectron International
Headquarters
267 Lowell Road
Hudson, New Hampshire 03051
+1-888-328-7661 tel
+1-888-329-8328 fax
Vectron International LLC.
100 Watts Street
Mount Holly Springs, PA 17065
USA
+1-717-486-3411 tel
+1-717-486-5920 fax
Vectron international GmbH & Co. KG
Landstrasse
D-74924 Neckarbischofsheim
Germany
+49-07268-801-0 tel
+49-07268-801-281 fax
Vectron Asia Pacific Sales Office
Unit 3119 31st Floor, Jin Mao Tower, 88
Century Boulevard, Shanghai,
P.R. China 200120
+86 21 28909740 tel.
+86 21 28909240 fax
100 mA LVPECL or LVDS No load >200 MHz
RF Output
Parameter Min Typ Max Units Condition Ordering Code
5
Signal ACMOS RFA
Load 15 50 pF
Signal Level (Vol) 0.5 VDC Vs= 5.0V and 15pF load
0.3 VDC Vs=3.3V and 15pF load
0.25 VDC Vs=2.5V and 15pF load
Signal Level (Voh) 4.5 VDC Vs= 5.0V and 15pF load
3.0 VDC Vs=3.3V and 15pF load
2.25 VDC Vs=2.5V and 15pF load
Rise and fall times for ACMOS
(measured 10% to 90%)
10
6
3
ns
ns
ns
1.0 to 23.9 MHz
24.0 to 79.9 MHz
80.0 to 125.0MHz
Duty cycle 45
40
55
60
%
%
@ 50% Vs< 15 MHz
@ 50% Vs > 15 MHz
Signal TTL RFT
Load 10
Signal Level (Vol)
0.5 VDC Vs= 5.0V and 15pF load
Signal Level (Voh) 4.5 VDC Vs= 5.0V and 15pF load
Rise and fall times for TTL
(measured 0.8V to 2.0V)
5
3
ns
ns
1.0 to 23.9 MHz
24 to 125 MHz
Duty Cycle 45
40
55
60
%
%
@ 1.4V < 15 MHz
@ 1.4V > 15 MHz
Signal LVPECL RFP
Load 50 Ω Into Vcc-2V or Thevenin Equivalent
Signal Level (Vol)
Vs -1.62 VDC -40 … +85°C operating temp
Signal Level (Voh) Vs- 1.025 VDC -40 … +85°C operating temp
Rise and fall times (measured @ 20%
to 80%)
1000
600
ps
ps
<100 MHz
> 100 MHz
Duty cycle LVPECL 45 55 % @ 50% Vdd
Jitter (rms) 10
0.5
ps
ps
BW = 10Hz to 20 MHz
BW = 12 kHz to 20 MHz
Period Jitter (pk-pk) 40 ps 10,000 Samples - Rising edge
Signal LVDS RFL
Load 60 100 140 Ω Between outputs
Signal Level (Vol)
1.2 VDC
Signal Level (Voh) 1.4 VDC
Differential Voltage (Vod) 240 330 460 mVpeak
Common Mode (Offset) Voltage (Vos) 1.125 1.2 1.375 V
Start-up Time 10 mS
Rise and fall times 600 1000 ps measured @ 20% to 80% of Vod
Duty cycle 45 55 % @ 50% of Vod
Jitter (rms) 5
1
ps
ps
BW = 10Hz to 20 MHz
BW = 12 kHz to 20 MHz
Period Jitter (pk-pk) 40 ps 10,000 Samples - Rising edge
Additional Parameters
Screening Vectron Verification
9
V
Screening Class B, MIL-PRF-55310, Rev.D
B
Output Enable
6
Logic "0" input = Outputs disabled (Tri-state)
Logic "1" or floating input = Outputs enabled) Standard for ACMOS, TTL and LVDS outputs
Logic "0" or floating input = Outputs enabled
Logic "1" input = Outputs disabled (Tri-state) Standard for LVPECL output
Weight < 2 grams
Processing & Packing Handling & processing note
C1300 PXO
Vectron International · www.vectron.com
v.2009-09-15-05 · page 3 of 4 SEM
Vectron International
Headquarters
267 Lowell Road
Hudson, New Hampshire 03051
+1-888-328-7661 tel
+1-888-329-8328 fax
Vectron International LLC.
100 Watts Street
Mount Holly Springs, PA 17065
USA
+1-717-486-3411 tel
+1-717-486-5920 fax
Vectron international GmbH & Co. KG
Landstrasse
D-74924 Neckarbischofsheim
Germany
+49-07268-801-0 tel
+49-07268-801-281 fax
Vectron Asia Pacific Sales Office
Unit 3119 31st Floor, Jin Mao Tower, 88
Century Boulevard, Shanghai,
P.R. China 200120
+86 21 28909740 tel.
+86 21 28909240 fax
Standard Environmentals
Parameter Test Condition
Vibration MIL-STD-202, Method 204, Condition G (30 G, 10Hz-2000Hz)
Shock MIL-STD-202, Method 213, Condition I (100 G, 6ms, Sawtooth)
Acceleration MIL-STD-883, Method 2001, Condition A (5000 G, Y1 Plane)
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Thermal Shock MIL-STD-883, Method 107, Condition B
Solderability MIL-STD-202, Method 208
Leak Test (Fine and Gross) MIL-STD-883, Method 1014, Condition A1 and C1
Absolute Maximum Ratings
Parameter Min Typ Max Units Condition
Supply voltage (Vs) 7.0 V Vs=5.0VDC
7.0 V Vs=3.3VDC
Operable temperature range -55 +125 °C
Storage temperature range -62 +125 °C
Enclosures
Type A – ACMOS or TTL Type B – LVPECL or LVDS
Package Codes:
Codes Height Stand-off Codes Height Stand-off
A1 = 4 leads 0.188 max 0.043 max B1 = 6 leads 0.188 max 0.043 max
E1 = Enable/Disable pin 1 (4.77) (1.09) E1 = Enable/Disable pin 1 (4.77) (1.09)
X = N/C pin 1 E2 = Enable/Disable pin 2
X = N/C pin 1 and pin 2
T= Tinned J leads
8
T= Tinned J leads
8
X= No Tinning X = No Tinning
Pin Connections Pin Connections
1 – Enable/Disable or N/C 3 – RF Output 1 – Enable/Disable or N/C 4 – RF Output
2 – Ground (case) 4 – Supply Voltage 2 – N/C 5 – Complementary Output
3 – Ground (Case) 6 – Supply Voltage
C1300 PXO
Vectron International · www.vectron.com
v.2009-09-15-05 · page 4 of 4 SEM
Vectron International
Headquarters
267 Lowell Road
Hudson, New Hampshire 03051
+1-888-328-7661 tel
+1-888-329-8328 fax
Vectron International LLC.
100 Watts Street
Mount Holly Springs, PA 17065
USA
+1-717-486-3411 tel
+1-717-486-5920 fax
Vectron international GmbH & Co. KG
Landstrasse
D-74924 Neckarbischofsheim
Germany
+49-07268-801-0 tel
+49-07268-801-281 fax
Vectron Asia Pacific Sales Office
Unit 3119 31st Floor, Jin Mao Tower, 88
Century Boulevard, Shanghai,
P.R. China 200120
+86 21 28909740 tel.
+86 21 28909240 fax
How to Order this Product:
10
Step 1 Use this worksheet to forward the following information to your factory representative (example follows):
Model
Stability
Code
Initial Accuracy
Code
(if required)
Supply Voltage
Code
RF Output
Code
Screening
Code
Package
Code
Enable/Disable
Code
Tinning
Code
C1300 C505 T505 SV033 RFA V A1 E1 T
Step 2 The factory representative will then respond with a Vectron Part Number in the following configuration:
Model Package Code Dash Dash Number
C1300 [Customer Specified Package Code]
- [Factory Generated 4 digit number]
Typical P/N C1300A1-0001
Notes:
1
Contact factory for improved stabilities or additional product options. Not all options and codes are available at all RF outputs and
frequencies.
2
Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control
voltage, load, temperature (25°C).
3
Phase noise degrades with increasing output frequency.
4
Subject to technical modification.
5
Contact factory for availability.
6
Contact factory for other options.
7
Overall stabilities do not require an initial accuracy code.
8
Leads tinned IAW Vectron International standard procedure (GR-37409).
9
Vectron Verification IAW Vectron International standard process (HK-69314).
10
Please be sure to specify nominal frequency.
