SEMiX653GD176HDc Absolute Maximum Ratings Symbol Conditions Values Unit IGBT VCES IC Tj = 150 C 1700 V Tc = 25 C 619 A Tc = 80 C 438 A 450 A ICnom ICRM SEMiX(R) 33c Trench IGBT Modules ICRM = 2xICnom 900 A -20 ... 20 V 10 s -55 ... 150 C Tc = 25 C 545 A Tc = 80 C 365 A 450 A VGES tpsc VCC = 1000 V VGE 20 V VCES 1700 V Tj = 125 C Tj Inverse diode IF SEMiX653GD176HDc Tj = 150 C IFnom Features IFRM IFRM = 2xIFnom 900 A IFSM tp = 10 ms, sin 180, Tj = 25 C 2900 A -40 ... 150 C * Homogeneous Si * Trench = Trenchgate technology * VCE(sat) with positive temperature coefficient * UL recognised file no. E63532 Module Typical Applications* Visol * AC inverter drives * UPS * Electronic welders Characteristics Tj It(RMS) Tstg Symbol AC sinus 50Hz, t = 1 min Conditions min. 600 A -40 ... 125 C 4000 V typ. max. Unit Tj = 25 C 2 2.45 V Tj = 125 C 2.45 2.9 V Tj = 25 C 1 1.2 V Tj = 125 C 0.9 1.1 V Tj = 25 C 2.2 2.8 m 3.4 4.0 m 5.8 6.4 V 3 mA IGBT VCE(sat) IC = 450 A VGE = 15 V chiplevel VCE0 rCE VGE = 15 V Tj = 125 C VGE(th) VGE=VCE, IC = 18 mA ICES VGE = 0 V VCE = 1700 V Cies Coes Cres VCE = 25 V VGE = 0 V QG VGE = - 8 V...+ 15 V RGint Tj = 25 C VCC = 1200 V IC = 450 A td(on) tr Eon RG on = 3.6 RG off = 3.6 5.2 Tj = 25 C Tj = 125 C mA f = 1 MHz 39.6 nF f = 1 MHz 1.65 nF f = 1 MHz Tj = 125 C 1.31 nF 4200 nC 1.67 290 ns Tj = 125 C 90 ns Tj = 125 C 300 mJ Tj = 125 C 975 ns tf Tj = 125 C 190 ns Eoff Tj = 125 C 180 mJ td(off) Rth(j-c) per IGBT 0.054 K/W GD (c) by SEMIKRON Rev. 1 - 24.06.2010 http://store.iiic.cc/ 1 SEMiX653GD176HDc Characteristics Symbol Conditions Inverse diode VF = VEC IF = 450 A VGE = 0 V chip VF0 rF SEMiX(R) 33c IRRM Qrr Trench IGBT Modules Err Rth(j-c) SEMiX653GD176HDc * Homogeneous Si * Trench = Trenchgate technology * VCE(sat) with positive temperature coefficient * UL recognised file no. E63532 Typical Applications* * AC inverter drives * UPS * Electronic welders Tj = 25 C Tj = 125 C typ. max. Unit 1.7 1.90 V 1.7 1.9 V Tj = 25 C 0.9 1.1 1.3 V Tj = 125 C 0.7 0.9 1.1 V Tj = 25 C 1.3 1.3 1.3 m 1.8 1.8 m Tj = 125 C IF = 450 A Tj = 125 C di/dtoff = 4200 A/s T = 125 C j VGE = -15 V T j = 125 C VCC = 1200 V per diode 1.8 380 A 130 C 73 mJ 0.11 K/W Module LCE RCC'+EE' Features min. res., terminal-chip Rth(c-s) per module Ms to heat sink (M5) 20 nH TC = 25 C 0.7 m TC = 125 C 1 m 0.014 to terminals (M6) Mt K/W 3 5 Nm 2.5 5 Nm Nm w 900 g Temperatur Sensor R100 Tc=100C (R25=5 k) B100/125 R(T)=R100exp[B100/125(1/T-1/T100)]; T[K]; 493 5% 3550 2% K GD 2 Rev. 1 - 24.06.2010 http://store.iiic.cc/ (c) by SEMIKRON SEMiX653GD176HDc Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' Fig. 2: Rated current vs. temperature IC = f (TC) Fig. 3: Typ. turn-on /-off energy = f (IC) Fig. 4: Typ. turn-on /-off energy = f (RG) Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristic (c) by SEMIKRON Rev. 1 - 24.06.2010 http://store.iiic.cc/ 3 SEMiX653GD176HDc Fig. 7: Typ. switching times vs. IC Fig. 8: Typ. switching times vs. gate resistor RG Fig. 9: Typ. transient thermal impedance Fig. 10: Typ. CAL diode forward charact., incl. RCC'+EE' Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery charge 4 Rev. 1 - 24.06.2010 http://store.iiic.cc/ (c) by SEMIKRON SEMiX653GD176HDc SEMiX 33c pinout This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our personal. (c) by SEMIKRON Rev. 1 - 24.06.2010 http://store.iiic.cc/ 5