North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662
4
Special Features
Electrical Specs
20 Watts
APA06
APA04 - Boost
• Excellent for POL Applications
• High Efficiency - Non Isolated
• 3.3V and 5V input,
• Standard SIP package 2.5 X .55 X .31”
• Enable and Trim Function
• Overcurrent Protection
• Sense Pins
Input
Input range 3.0 to 5.5V (Buck)
3.0 to 4.0V (Boost)
Efficiency 90% (5/3.3) , 83% (1.8V)
Output
Voltage tolerance ± 1.0%
Line regulation ± 0.5%
Load regulation ± 0.5%
Noise/ripple 50mV P-P
Short circuit protection Auto-recovery
Transient response 4%Vo, 200us
Temperature Regulation ±0.02 %Vo/°C
Switching frequency 430kHz typ
Temperature coefficient ± 0.03%Vo/° C
Isolation
Non Isolated
Total Power: 20 Watts
Input Voltages: 3.3V, 5V
No. of Outputs: Single
Operating ambient temperature: -
25°C to 55°C (full load, 200LFM)
Storage temperature: -40°C to +125°C
MTBF: =7,000,000 hours (Bellcore TR332,
Ta=25°C)
Weight: = 7.5 grams max
UL UL 1950 Recognized
CSA CAN22.2-950 Recognized
TUV EN60950 Certified
Environmental
Safety
rev 01.14.03
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
5
Ordering Information
www.astec.com
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Input Output Efficiency Model Number
Voltage Voltage
Buck
3.0-5.5 V 1.2V @ 6.0 A 80% APA06K04
3.0-5.5 V 1.5V @ 6.0 A 81% APA06M04
3.0-5.5 V 1.8V @ 6.0 A 83% APA06Y04
3.0-5.5 V 2.1V @ 6.0 A 86% APA06D04
4.5-5.5 V 2.5V @ 6.0 A 87% APA06G05
4.5-5.5 V 3.3V @ 6.0 A 90% APA06F05
Boost
3.3-4.0 V 5.0V @ 4.0 A 89% APA04A03
Notes:
1. Add -E to eliminate Sense and Power Good feature
2. Right Angle Pins Available
Notes:
1. Recommended Input Filter - 220uF Electrolytic Cap
in parallel with 2.2uF Ceramic Cap Vin+ to GND
2. Recommended Output Filter - 2.2uF Ceramic Cap in
parallel with 1000uF Electrolytic Cap (Vout+ to GND)
3. 20 MHz bandwidth. An external 0.1 uf ceramic capacitor
is recommended to be placed from +V out to comm.
4. All specifications are typical at nominal line, full load,
and 25°C unless otherwise noted.
5. All specifications subject to change without notice.
6. Mechanical drawings are for reference only.
APA06/04
APA06 ( Buck ) PinoutAPA04 ( Boost ) Pinout
