820
P&B
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Catalog 1308242
Issued 3-03 (PDF Rev. 5-05)
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P25 series
Definite Purpose Magnetic Contactor
25 Ampere Full Load
30 Ampere Resistive
AC & DC Coils
File E22575
File LR15734
P25 with DC coil P25 with AC coil
Contact Data @ 25°C
Arrangements: Up to 3 Form X (3PST-NO-DM).
Ratings: See contact rating table.
Material: Silver-cadmium oxide.
Expected Life: 200,000 operations at full load.
AC coil: 2 million operations, mechanical.
DC coil: 5 million operations, mechanical.
Minimum Contact Load: 3A @ 120VAC.
Features
• AC and DC coils.
• For controlling motors, power supplies, heating elements and lighting.
• Dust cover available.
• Auxiliary switch available.
Initial Dielectric Strength
Initial Breakdown Voltage: 2,200V rms. minimum between all elements
and between all elements and ground.
Consult factory for other voltages.
*Must operate is 75% of nominal voltage for any mounting position, applicable for vertical or
horizontal mounting, but not for upside-down mounting.
**Units requiring less power can be provided for some applications.
Consult factory for details.
Note: Coil suppression is recommended for all DC coil units,
particularly 120 and 240VDC coils.
Operate Data @ 25°C
Must-Operate Voltage: See coil data tables.
Environmental Data
Temperature Range: AC: —55°C to +65°C
DC: —55°C to +55°C
Contact sales representative for higher
temperature ratings.
Coil Data
12 34 9 15 353
24 133 18 30 180
Nominal Resistance Must Maximum Nominal Coil
VDC (Ohms ± 10% Operate* Operating Current (ma) @
@ 25°C) Volts Volts Nominal Voltage
24 24 24 20.4 20.4
120 120 110 102 94
240 208/240 208/220 177 177
AC Voltage Nominal Must Operate
Rating 60 Hz. 50 Hz. 60 Hz. 50 Hz.
1Ø2P 1.5HP 3HP —
3Ø3P 3HP 7.5HP 10HP
Motor Rating in Horsepower
Type @ 120V @ 240V @ 440-600V
P25 25A 150A 125A 100A 30A
Motor Rating in Amps, 3Ø3P or 1Ø2P Resistive Rating
Type Full Load Locked Rotor (Electric Heat)
@ 600V @ 240V @ 480V @ 600V @ 600V
Main Contact Ratings @ +25°C, 60 Hz.
Notes: Models utilizing box lug terminals are restricted to the following ratings: 25 FLA, 150
LRA @ 250VAC; 30A @ 277VAC Resistive; Horsepower ratings shown in the table are
valid up to 240VAC.
Tungsten Lamp Rating: 30A, 277VAC.
Electric Discharge Lamp Rating: 30A, 277VAC.
Heavy Duty Pilot Ratings @ 120V through 600V: 720VA max. (Box lug nut
units limited to 277VAC.)
Auxiliary Snap-Action Switch
Arrangements: Up to 2 Form C (DPDT).
Rating: 10 amps at 120VAC, 60 Hz. @ 25°C.
Material: Silver.
Mechanical Data
Mounting: No. 10 screws on 2.125” (53.98mm) centers or universal
mounting bracket.
Termination:
Contacts: 8-32 screw for No. 16 to No. 8 wire, dual .250” (6.35mm)
quick connect, box lug or captive pressure plate.
Coil: Combination 8-32 screw and .250” (6.35mm) or .187” (4.75mm)
quick connect, combination captive pressure plate and .250”
(6.35mm) quick connect, or .250” (6.35mm) quick connect.
Aux. Switch: .187” (4.75mm) quick connect.
Weight: 14 oz. (397g).
Coil Data @ 25°C
Voltage: From 6 to 240VDC and 24 to 600VAC, 50/60 Hz.
Power: DC, 4-8W; AC, 40VA inrush; 10VA, sealed.
Duty Cycle: Continuous.
Insulation Class: Class A, standard. Class B available.
Initial Insulation Resistance: 100 megohms, minimum.
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
821
P&B
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Catalog 1308242
Issued 3-03 (PDF Rev. 5-05)
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Ordering Information
P25P42A12P1-120
P25P42A12P1-240
P25P42A22P1-120
P25P42A22P1-240
P25P42D22P1-12
P25P42D22P1-24
Typical Part No. BP25 P 42 A 1 4 P 1 -240
1. Type:
P25 Definite Purpose Contactor
2. Auxiliary Switch:
P = No Aux Switch
C = 1 Form C (SPDT), silver contacts
F = 2 Form C (DPDT), silver contacts
Double pole contact forms require two switches.
3. Main Contact Arrangement:
42 = 3 Form X (3PST-NO-DM)
43 = 2 Form X (DPST-NO-DM) & 1 Form Y (SPST-NC-DB)
Other contact arrangements are available.
4. Coil Control Input:
A = Alternating Current, 50/60 Hz. D = Direct Current
5. Mounting and Installed Accessories:
1 = Without Mounting Plate*
2 = With Mounting Plate
* Order separately any mounting hardware which is to be bulk packed.
6. Main Contact Terminals:
2 = 8-32 Screw Terminals
3 = Dual .250” (6.35mm) Quick Connect
5 = 8-32 Screw with Captive Pressure Plate
7. Auxiliary Contact Terminals:
P = No Auxiliary Switch
C = .187” (4.75mm) Quick Connect
8. Coil Terminals:
1 = Combination 8-32 Screw Terminal and .250” (6.35mm) Quick Connect
6-32 Screw Terminal available on DC Coils only.
9. Coil Voltage:
24, 120 or 240VAC
12 or 24VDC
See Coil Data table.
822
P&B
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Catalog 1308242
Issued 3-03 (PDF Rev. 5-05)
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P25 With AC Coil P25 With DC Coil Mounting Plate Footprint
3.575 MAX.
(90.81)
W/CONTACT DUST COVER
.69 ± .015
(17.5 ± .38)
.88 ± .015
(22.4 ± .38)
3.325 MAX.
(84.48)
W/O CONTACT DUST COVER
2.750 MAX.
(69.85)
W/O SWITCHES
3.400 MAX.
(86.36)
W/SINGLE SWITCH
.90 ± .015
(22.9 ± .38)
3.25 MAX.
(82.6)
W/CONTACT DUST COVER
.69 ± .015
(17.5 ± .38)
1.61 MAX.
(40.9)
3.0 MAX.
(76.2)
W/O CONTACT
DUST COVER
2.750 MAX.
(69.85)
W/O SWITCHES
3.400 MAX.
(86.36)
W/SINGLE SWITCH
2.50
(63.5)
2.00
(50.8)
(1.00)
(25.4)
.250
(6.35)
1.625
(41.28)
3.125
(79.38)
3.250
(82.55)
1.875
(47.63)
.062
(1.57)
3.75
(95.3)
.142
(3.61)
2.125
(53.98)
1.062
(26.97)
.5 DIA.
(12.7)
#10-32 TYP.
2 PLACES
.21
(5.3)
3.35 MAX.
(85.1)
W/DOUBLE SWITCH
2.125 ± .01
(53.98 ± .25)
2.90 MAX.
(73.7)
W/SINGLE SWITCH
2.50 MAX.
(63.5)
2.05 MAX.
(52.1)
.218 ± .01
(5.54 ± .25)
4.050 MAX.
(102.87)
W/DOUBLE SWITCH
3.35 MAX.
(85.1)
W/DOUBLE SWITCH
2.125 ± .01
(53.98 ± .25)
2.90 MAX.
(73.7)
W/SINGLE SWITCH
2.50 MAX.
(63.5)
2.05 MAX.
(52.1)
.218 ± .01
(5.54 ± .25)
4.050 MAX.
(102.87)
W/DOUBLE SWITCH
Outline Dimensions
Duak .250” (6.35mm)
Quick Connect 26A902
Code 3
#8-32 UNF-2A X .375” (9.525mm)
Binder Terminal Screw 15S334
Code 2
#8-32 UNF-2A X .500” (12.7mm)
Screw With Captive
Pressure Plate 15S354
Code 5
Box Lug Connector 26A866
Code 4
Contact Terminal Options
Contact Replacement Kit - 9P25X1
Contact replacement kit includes 3 contact pressure springs, 3 movable contact assemblies and 6 stationary contact assemblies. Contact replacement kits
are for use only on those models with form X contact arrangements.
Mounting Plate Kit - 9P25X2
Mounting plate kit includes one mounting plate (37B918) and two mounting screws (15J011).
Auxiliary Switch Kit for P25 AC Coil Units - 9P25X3
This auxiliary switch kit includes one plastic actuator and one auxiliary switch assembly. It contains no screw. One assembly screw must be removed from the
P25 contactor and used to mount the auxiliary switch.
Auxiliary Switch Kit for P25 DC Coil Units - 9P25X4
This auxiliary switch kit includes one plastic actuator, one auxiliary switch assembly and one thread cutting screw.
Replacement Parts and Accessories
