Cordsets EZ-SCREEN LP (R) All standard cordsets are yellow PVC cable with black overmold. For black PVC cable and overmold, add suffix B to model number (example, RDLP-815DB). Other cordset options available, see EZ-SCREEN LP manual (p/n 140044). Removable Disconnect Connector with Flying Leads Model RDLP-815D Length 4.5 m RDLP-825D 8m RDLP-850D 15 m RDLP-875D 23 m RDLP-8100D 30 m 8-Pin M12/Euro QD with Flying Leads Cable Type 8-conductor (22-ga.) Removable Disconnect Connector with M12/Euro QD Model Length 0.3 m DELPE-81D QDE-815D Length 4.5 m QDE-825D 8m QDE-850D 15 m QDE-875D 23 m QDE-8100D 30 m Model Length 0.3 m DEE2R-81D DELPE-83D 1m DEE2R-83D 1m DELPE-88D 2.4 m DEE2R-88D 2.4 m DELPE-815D 4.6 m DEE2R-815D 4.5 m DELPE-825D 8m DEE2R-825D 8m DELPE-850D 15 m DEE2R-850D 15 m DELPE-875D 23 m DEE2R-875D 23 m DELPE-8100D 30 m DEE2R-8100D 30 m 8-conductor (22-ga.) cordset with removable disconnects for connection of 2nd, 3rd and 4th sensor in series Model Cable Type Model CSB-M1281M1281 Branches (Female) Trunk (Male) 0.3 m DELP-110E DELP-111E 0.3 m CSB-M12815M1281 DELP-113E 1m CSB-M12825M1281 8m DELP-118E 2.4 m CSB-UNT825M1281 8 m unterminated DELP-1115E 4.5 m DELP-1125E 8m DELP-1150E 15 m DELP-1175E 23 m DELP-11100E 30 m CSB-M1288M1281 t SC22-3 Safety Controller Terminal SC22-3-S Screw SC22-3-C Clamp XM Card Data Sheet Yes 133487 *Other models are available (example, USB cable, XM programming, EtherNet IP, and Modbus TCP). Interface Modules Model 2.5 m 2 x 0.3 m 5m 3 NO redundant-output contacts (6 amp) IM-T-11A 2 NO redundant-output contacts (6 amp), plus 1 NC auxiliary 62822 Model EZAC-R9-QE8 EZAC-R11-QE8 Outputs EDM Model LPA-TP-1 Terminator plug DELPE-81D Replacement pigtail for P8 models 3 NO Selectable 1- or 21 NO & 1 NC channel or no EDM 120321 Mechanically Linked Contactors Model Description 11-BG00-31-D-024 3 NO, 1 NC (10 amp) BF1801L-024 3 NO, 1 NC (18 amp) Banner Engineering Corp. EZ-SCREEN : Best-in-Class, Two-Piece Safety Light Curtains Data Sheet * Type 4 and Type 2 point-of-operation guarding * Perimeter and access guards * Single point for entry/exit * Cascading models * Easy setup, alignment and maintenance * Unique mounting and retrofit options 111881 www.bannerengineering.com 9714 Tenth Avenue North * Minneapolis, Minnesota 55441 * (763) 544-3164 * Fax: (763) 544-3213 Toll-free: 888-373-6767 * www.bannerengineering.com * Email: sensors@bannerengineering.com P/N 142815 Simple, two-piece integrated design 26 mm Superior optical design for easy system alignment Convenient setup without a PC, disassembly or additional devices Easily configured Reduced Resolution and Fixed Blanking External Device Monitoring Exceeds OSHA/ANSI Control Reliability requirements, certified to cULus NIPF, and CE certified to Type 4, Category 4 PLe and SIL 3 Two solid-state OSSD safety outputs; includes selectable trip/latch output User configurable Aux output Flexible wiring scheme for allowing "swapable" emitters and receivers 28 mm Flexible Cascading 8-conductor (22-ga.) Allows four systems--of any length and resolution--to be connected in series, forming a single safety device Guards multiple sides of machine, such as L- or U-shaped configuration Provides continuous detection without overlapping light curtains or protruding cables Compact design and flexible mounting options deliver an exact fit with no dead zone. (R) Description (R) Data Sheet Cable Type Description Data Sheet 2 NO redundant-output contacts (6 amp), plus MMD-TA-12B 1 NC auxiliary 116390 MMD-TA-11B 2 PNP solid-state safety outputs (0.5 amp each) AC Interface Box * Hard-wired AC Power, Output and EDM Connections * 8-pin M12/Euro-style QD Emitter/Receiver Connection 8-conductor (22-ga.) Model Data Sheet IM-T-9A Cable Type MMD Muting Modules Replacement Parts Description 8-conductor (22-ga.) 8-Pin M12/Euro QD Splitter Length 0.05 m 11-conductor (24-ga.) Safety light screen for end-to-end detection Cable Type 8-Pin M12/Euro QD (Double-Ended) Cable Type Removable Disconnect Connector (Double-Ended): Cascade Model* Model Low-profile design with proven EZ-SCREEN (R) performance The EZ-SCREEN line of robust safety light curtains now includes models for continuous detection along the entire light screen length. The space-saving, compact profile of the EZ-SCREEN LP is ideal for smaller machines, yet robust enough to meet the demands of large power presses. Plus, with several housing finishes, cascading and many mounting options, EZ-SCREEN LP provides a perfect fit for a wide range of safeguarding applications. Features compact 28 x 26 mm housing Identifies blocked beams using zone indicators P ositions first and last beam at the ends for continuous sensing F eatures 7-segment display with diagnostic information and number of blocked beams Includes 14 or 25 mm resolution models ffers defined areas from 270 to 1810 mm O with detection ranges up to 7 m P resents system status and alignment using highly visible LEDs (bi-color) Includes models with nickel-plated housing for ESD-safe applications, clear anodized aluminum housing or "safety" yellow powder-coat housing P rovides response times as fast as 8 milliseconds bannerengineering.com Mounting Versatility Space-saving design for a perfect fit Brackets included for end mounting or side mounting with no dead zone Brackets rotate for fine alignment Inline and L-brackets for mounting with no "gap" on 25 mm systems Optional brackets for mounting inside P1000 Unistrut(R) metal framing Multi-directional routing of cables for easy integration into machinery www.bannerengineering.com 1.888.373.6767 Connections EZ-SCREEN(R) LP System Model Guide Model Config- Resouration lution SLP 14 = 14 mm 25 = 25 mm E = Emitter R = Receiver P = Pair 270 mm 410 mm 550 mm 690 mm 830 mm 970 mm 1110 mm 1250 mm 1390 mm 1530 mm 1670 mm 1810 mm 300 mm 8-pin M12/Euro Pigtail QD Order mating M12/Euro QD cordset separately: QDE, DEE2R or CSB; see page 4 Housing Option Connection E 25 - 410 SLP = Standard LP SLPC = Cascade LP Space-saving design installs perfectly in machinery, eliminating protruding light screens. Defined Area A To Order: P8 P8 = M12/Euro Pigtail QD P88 = M12/Euro Pigtail QD (Pair) (Blank) = Integral RD Integral Removable Disconnect (RD) Order RDLP, DELPE or DELP separately; see page 4 A = A nodized Aluminum N = ESD-safe Nickel-plated (Blank) = Standard Yellow RD to RD Requires DELP (connection of 2nd, 3rd and 4th sensors in a cascade); see page 4 Included side brackets allow no dead zone with continuous sensing along entire length. 270 mm 410 mm 550 mm 690 mm 830 mm Included end brackets provide 360 mounting. Multi-directional cables can be routed in any direction. 970 mm 1110 mm 1250 mm 1390 mm 1530 mm 1670 mm Flexible cables with a 5 mm bending radius provide interferencefree routing. 1810 mm 25 mm Resolution Models* Receiver Emitter Connection Pair ptional housings with Pigtail QD models have a black 300 mm PVC O cable and QD overmold. SLPE25-270P8 SLPR25-270P8 SLPP25-270P88 SLPE25-270 SLPR25-270 SLPP25-270 SLPE25-410P8 SLPR25-410P8 SLPP25-410P88 SLPE25-410 SLPR25-410 SLPP25-410 SLPE25-550P8 SLPR25-550P8 SLPP25-550P88 SLPE25-550 SLPR25-550 SLPP25-550 SLPE25-690P8 SLPR25-690P8 SLPP25-690P88 SLPE25-690 SLPR25-690 SLPP25-690 SLPE25-830P8 SLPR25-830P8 SLPP25-830P88 SLPE25-830 SLPR25-830 SLPP25-830 SLPE25-970P8 SLPR25-970P8 SLPP25-970P88 SLPE25-970 SLPR25-970 SLPP25-970 SLPE25-1110P8 SLPR25-1110P8 SLPP25-1110P88 SLPE25-1110 SLPR25-1110 SLPP25-1110 SLPE25-1250P8 SLPR25-1250P8 SLPP25-1250P88 SLPE25-1250 SLPR25-1250 SLPP25-1250 SLPE25-1390P8 SLPR25-1390P8 SLPP25-1390P88 SLPE25-1390 SLPR25-1390 SLPP25-1390 SLPE25-1530P8 SLPR25-1530P8 SLPP25-1530P88 SLPE25-1530 SLPR25-1530 SLPP25-1530 SLPE25-1670P8 SLPR25-1670P8 SLPP25-1670P88 SLPE25-1670 SLPR25-1670 SLPP25-1670 SLPE25-1810P8 SLPR25-1810P8 SLPP25-1810P88 SLPE25-1810 SLPR25-1810 SLPP25-1810 Response Time Defined Area 8 ms 410 mm 9.5 ms 550 mm 11 ms 690 mm 12.5 ms 830 mm 14 ms 970 mm 15.5 ms 1110 mm 17 ms 1250 mm 18.5 ms 1390 mm 20 ms 1530 mm 21 ms 1670 mm 22.5 ms 1810 mm M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD 24 ms LEDs and 7-segment display indicate system status, alignment and blocked beams. Emitter 25 mm Resolution Models* Receiver Connection Pair SLPCE25-410P8 SLPCR25-410P8 SLPCP25-410P88 SLPCE25-410 SLPCR25-410 SLPCP25-410 SLPCE25-550P8 SLPCR25-550P8 SLPCP25-550P88 SLPCE25-550 SLPCR25-550 SLPCP25-550 SLPCE25-690P8 SLPCR25-690P8 SLPCP25-690P88 SLPCE25-690 SLPCR25-690 SLPCP25-690 SLPCE25-830P8 SLPCR25-830P8 SLPCP25-830P88 SLPCE25-830 SLPCR25-830 SLPCP25-830 SLPCE25-970P8 SLPCR25-970P8 SLPCP25-970P88 SLPCE25-970 SLPCR25-970 SLPCP25-970 SLPCE25-1110P8 SLPCR25-1110P8 SLPCP25-1110P88 SLPCE25-1110 SLPCR25-1110 SLPCP25-1110 SLPCE25-1250P8 SLPCR25-1250P8 SLPCP25-1250P88 SLPCE25-1250 SLPCR25-1250 SLPCP25-1250 SLPCE25-1390P8 SLPCR25-1390P8 SLPCP25-1390P88 SLPCE25-1390 SLPCR25-1390 SLPCP25-1390 SLPCE25-1530P8 SLPCR25-1530P8 SLPCP25-1530P88 SLPCE25-1530 SLPCR25-1530 SLPCP25-1530 SLPCE25-1670P8 SLPCR25-1670P8 SLPCP25-1670P88 SLPCE25-1670 SLPCR25-1670 SLPCP25-1670 SLPCE25-1810P8 SLPCR25-1810P8 SLPCP25-1810P88 SLPCE25-1810 SLPCR25-1810 SLPCP25-1810 M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD Response Time 9.5 ms Up to four units can be connected in series without protruding cables. 11 ms 12.5 ms 14 ms 15.5 ms 17 ms 18.5 ms 20 ms 21 ms Cascading models in L- or U-shaped configuration provide continuous sensing. 22.5 ms 24 ms * Only 25 mm resolution models are listed. For 14 mm resolution, replace 25 with 14 in model number (example, SLPCE14-270P8). Only standard yellow housing models are listed. The 300 mm pigtail has yellow PVC cable with black PVC QD overmold. 270 mm defined area is not available in cascade model. A standard SLP..-270.. model can be used at the end of a cascade system. *O nly 25 mm resolution models are listed. For 14 mm resolution, replace 25 with 14 in model number (example, SLPE14-270P8). Only standard yellow housing models are listed. The 300 mm pigtail has yellow PVC cable with black PVC QD overmold. Standard and Optional Brackets LPA-MBK-11 (Standard) * End-cap bracket kit * 360 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated; die-cast zinc plate * Flanges can be mounted "In" or "Out" * Includes 2 brackets and hardware Low-profile mounting saves valuable space. K it options are available. See EZ-SCREEN LP manual (p/n 140044), the Banner Safety Catalog or www.bannerengineering.com for complete information, a current listing of accessories and options for kitting components. Call factory with questions regarding accessories. 5 Choose one cordset for each sensor or two cordsets for a pair. See page 4: * M12/Euro Pigtail QD models (example, SLP..-270P8) require mating 8-pin M12/Euro QD cordsets, such as: - QDE cordset with flying leads - DEE2R double-ended cordset - CSB series splitter cordset * Integral RD models (example, SLP..-270) require mating cordsets, such as: - RDLP cordset with flying leads - DELPE double-ended cordset with M12/Euro QD (requires additional mating 8-pin M12/Euro QD cordsets) - DELP cordset in cascade applications for connection of 2nd, 3rd and 4th sensors 6 Choose an optional interfacing solution, such as an IM-T-9A or -11A interfacing model. See page 4. Cascade EZ-SCREEN(R) LP Models, 24V dc @ 210 mA Standard EZ-SCREEN LP Models, 24V dc @ 210 mA Defined Area 1 Choose model, defined area and resolution (14 or 25 mm). 2 Choose an Emitter (E), a Receiver (R) or a Pair (P). 3 Y ellow housing is standard. To choose an optional housing, add an A or N prior to the connection designation: * A for anodized aluminum (clear) finish with black end caps (example, SLPE25-270A). * N for ESD-safe models with a nickel-plated housing and end caps (example, SLPE25-270N). 4 C hoose the connection: 300 mm M12/Euro Pigtail QD or integral Removable Disconnect (RD). See connections to left. LPA-MBK-12 (Standard) * Side-mount bracket kit * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated; die-cast zinc clamp * Includes 1 bracket and hardware More information online at bannerengineering.com Cascade Brackets LPA-MBK-20 * Universal adapter bracket for mounting to engineered/slotted aluminum framing (example, 80/20 TM, Bosch) * Use with other LPA-MBK-xx brackets * 12-ga (2.66 mm) steel, black zinc plated * Includes 1 bracket and hardware LPA-MBK-22 * End-cap bracket for mounting sensor inside Unistrut(R) metal framing * Fits Unistrut(R) P1000 size (1 5/8"), with M6 or 1/4" channel nuts * 14-ga. (1.9 mm) steel, black zinc plated; die-cast zinc clamp * Includes 2 brackets and hardware LPA-MBK-21 LPA-MBK-180 LPA-MBK-135 LPA-MBK-120 LPA-MBK-90 * Pivoting L-bracket * Adjustable 90 to 180 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated * Inline bracket * Fixed 180 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated * Angled L-bracket * Fixed 135 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated * Angled L-bracket * Fixed 120 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated * Angled L-bracket * Fixed 90 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated Cascade brackets join two cascaded emitters or receivers. Each model number is one set of two brackets. Fixed-angle brackets allow end-to-end, L- or U-shaped, and angled setup without overlapping and maintain 25 mm resolution. Connections EZ-SCREEN(R) LP System Model Guide Model Config- Resouration lution SLP 14 = 14 mm 25 = 25 mm E = Emitter R = Receiver P = Pair 270 mm 410 mm 550 mm 690 mm 830 mm 970 mm 1110 mm 1250 mm 1390 mm 1530 mm 1670 mm 1810 mm 300 mm 8-pin M12/Euro Pigtail QD Order mating M12/Euro QD cordset separately: QDE, DEE2R or CSB; see page 4 Housing Option Connection E 25 - 410 SLP = Standard LP SLPC = Cascade LP Space-saving design installs perfectly in machinery, eliminating protruding light screens. Defined Area A To Order: P8 P8 = M12/Euro Pigtail QD P88 = M12/Euro Pigtail QD (Pair) (Blank) = Integral RD Integral Removable Disconnect (RD) Order RDLP, DELPE or DELP separately; see page 4 A = A nodized Aluminum N = ESD-safe Nickel-plated (Blank) = Standard Yellow RD to RD Requires DELP (connection of 2nd, 3rd and 4th sensors in a cascade); see page 4 Included side brackets allow no dead zone with continuous sensing along entire length. 270 mm 410 mm 550 mm 690 mm 830 mm Included end brackets provide 360 mounting. Multi-directional cables can be routed in any direction. 970 mm 1110 mm 1250 mm 1390 mm 1530 mm 1670 mm Flexible cables with a 5 mm bending radius provide interferencefree routing. 1810 mm 25 mm Resolution Models* Receiver Emitter Connection Pair ptional housings with Pigtail QD models have a black 300 mm PVC O cable and QD overmold. SLPE25-270P8 SLPR25-270P8 SLPP25-270P88 SLPE25-270 SLPR25-270 SLPP25-270 SLPE25-410P8 SLPR25-410P8 SLPP25-410P88 SLPE25-410 SLPR25-410 SLPP25-410 SLPE25-550P8 SLPR25-550P8 SLPP25-550P88 SLPE25-550 SLPR25-550 SLPP25-550 SLPE25-690P8 SLPR25-690P8 SLPP25-690P88 SLPE25-690 SLPR25-690 SLPP25-690 SLPE25-830P8 SLPR25-830P8 SLPP25-830P88 SLPE25-830 SLPR25-830 SLPP25-830 SLPE25-970P8 SLPR25-970P8 SLPP25-970P88 SLPE25-970 SLPR25-970 SLPP25-970 SLPE25-1110P8 SLPR25-1110P8 SLPP25-1110P88 SLPE25-1110 SLPR25-1110 SLPP25-1110 SLPE25-1250P8 SLPR25-1250P8 SLPP25-1250P88 SLPE25-1250 SLPR25-1250 SLPP25-1250 SLPE25-1390P8 SLPR25-1390P8 SLPP25-1390P88 SLPE25-1390 SLPR25-1390 SLPP25-1390 SLPE25-1530P8 SLPR25-1530P8 SLPP25-1530P88 SLPE25-1530 SLPR25-1530 SLPP25-1530 SLPE25-1670P8 SLPR25-1670P8 SLPP25-1670P88 SLPE25-1670 SLPR25-1670 SLPP25-1670 SLPE25-1810P8 SLPR25-1810P8 SLPP25-1810P88 SLPE25-1810 SLPR25-1810 SLPP25-1810 Response Time Defined Area 8 ms 410 mm 9.5 ms 550 mm 11 ms 690 mm 12.5 ms 830 mm 14 ms 970 mm 15.5 ms 1110 mm 17 ms 1250 mm 18.5 ms 1390 mm 20 ms 1530 mm 21 ms 1670 mm 22.5 ms 1810 mm M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD 24 ms LEDs and 7-segment display indicate system status, alignment and blocked beams. Emitter 25 mm Resolution Models* Receiver Connection Pair SLPCE25-410P8 SLPCR25-410P8 SLPCP25-410P88 SLPCE25-410 SLPCR25-410 SLPCP25-410 SLPCE25-550P8 SLPCR25-550P8 SLPCP25-550P88 SLPCE25-550 SLPCR25-550 SLPCP25-550 SLPCE25-690P8 SLPCR25-690P8 SLPCP25-690P88 SLPCE25-690 SLPCR25-690 SLPCP25-690 SLPCE25-830P8 SLPCR25-830P8 SLPCP25-830P88 SLPCE25-830 SLPCR25-830 SLPCP25-830 SLPCE25-970P8 SLPCR25-970P8 SLPCP25-970P88 SLPCE25-970 SLPCR25-970 SLPCP25-970 SLPCE25-1110P8 SLPCR25-1110P8 SLPCP25-1110P88 SLPCE25-1110 SLPCR25-1110 SLPCP25-1110 SLPCE25-1250P8 SLPCR25-1250P8 SLPCP25-1250P88 SLPCE25-1250 SLPCR25-1250 SLPCP25-1250 SLPCE25-1390P8 SLPCR25-1390P8 SLPCP25-1390P88 SLPCE25-1390 SLPCR25-1390 SLPCP25-1390 SLPCE25-1530P8 SLPCR25-1530P8 SLPCP25-1530P88 SLPCE25-1530 SLPCR25-1530 SLPCP25-1530 SLPCE25-1670P8 SLPCR25-1670P8 SLPCP25-1670P88 SLPCE25-1670 SLPCR25-1670 SLPCP25-1670 SLPCE25-1810P8 SLPCR25-1810P8 SLPCP25-1810P88 SLPCE25-1810 SLPCR25-1810 SLPCP25-1810 M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD M12/Euro Pigtail QD Integral RD Response Time 9.5 ms Up to four units can be connected in series without protruding cables. 11 ms 12.5 ms 14 ms 15.5 ms 17 ms 18.5 ms 20 ms 21 ms Cascading models in L- or U-shaped configuration provide continuous sensing. 22.5 ms 24 ms * Only 25 mm resolution models are listed. For 14 mm resolution, replace 25 with 14 in model number (example, SLPCE14-270P8). Only standard yellow housing models are listed. The 300 mm pigtail has yellow PVC cable with black PVC QD overmold. 270 mm defined area is not available in cascade model. A standard SLP..-270.. model can be used at the end of a cascade system. *O nly 25 mm resolution models are listed. For 14 mm resolution, replace 25 with 14 in model number (example, SLPE14-270P8). Only standard yellow housing models are listed. The 300 mm pigtail has yellow PVC cable with black PVC QD overmold. Standard and Optional Brackets LPA-MBK-11 (Standard) * End-cap bracket kit * 360 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated; die-cast zinc plate * Flanges can be mounted "In" or "Out" * Includes 2 brackets and hardware Low-profile mounting saves valuable space. K it options are available. See EZ-SCREEN LP manual (p/n 140044), the Banner Safety Catalog or www.bannerengineering.com for complete information, a current listing of accessories and options for kitting components. Call factory with questions regarding accessories. 5 Choose one cordset for each sensor or two cordsets for a pair. See page 4: * M12/Euro Pigtail QD models (example, SLP..-270P8) require mating 8-pin M12/Euro QD cordsets, such as: - QDE cordset with flying leads - DEE2R double-ended cordset - CSB series splitter cordset * Integral RD models (example, SLP..-270) require mating cordsets, such as: - RDLP cordset with flying leads - DELPE double-ended cordset with M12/Euro QD (requires additional mating 8-pin M12/Euro QD cordsets) - DELP cordset in cascade applications for connection of 2nd, 3rd and 4th sensors 6 Choose an optional interfacing solution, such as an IM-T-9A or -11A interfacing model. See page 4. Cascade EZ-SCREEN(R) LP Models, 24V dc @ 210 mA Standard EZ-SCREEN LP Models, 24V dc @ 210 mA Defined Area 1 Choose model, defined area and resolution (14 or 25 mm). 2 Choose an Emitter (E), a Receiver (R) or a Pair (P). 3 Y ellow housing is standard. To choose an optional housing, add an A or N prior to the connection designation: * A for anodized aluminum (clear) finish with black end caps (example, SLPE25-270A). * N for ESD-safe models with a nickel-plated housing and end caps (example, SLPE25-270N). 4 C hoose the connection: 300 mm M12/Euro Pigtail QD or integral Removable Disconnect (RD). See connections to left. LPA-MBK-12 (Standard) * Side-mount bracket kit * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated; die-cast zinc clamp * Includes 1 bracket and hardware More information online at bannerengineering.com Cascade Brackets LPA-MBK-20 * Universal adapter bracket for mounting to engineered/slotted aluminum framing (example, 80/20 TM, Bosch) * Use with other LPA-MBK-xx brackets * 12-ga (2.66 mm) steel, black zinc plated * Includes 1 bracket and hardware LPA-MBK-22 * End-cap bracket for mounting sensor inside Unistrut(R) metal framing * Fits Unistrut(R) P1000 size (1 5/8"), with M6 or 1/4" channel nuts * 14-ga. (1.9 mm) steel, black zinc plated; die-cast zinc clamp * Includes 2 brackets and hardware LPA-MBK-21 LPA-MBK-180 LPA-MBK-135 LPA-MBK-120 LPA-MBK-90 * Pivoting L-bracket * Adjustable 90 to 180 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated * Inline bracket * Fixed 180 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated * Angled L-bracket * Fixed 135 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated * Angled L-bracket * Fixed 120 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated * Angled L-bracket * Fixed 90 orientation * +10/-30 sensor rotation * 14-ga. (1.9 mm) steel, black zinc plated Cascade brackets join two cascaded emitters or receivers. Each model number is one set of two brackets. Fixed-angle brackets allow end-to-end, L- or U-shaped, and angled setup without overlapping and maintain 25 mm resolution. Cordsets EZ-SCREEN LP (R) All standard cordsets are yellow PVC cable with black overmold. For black PVC cable and overmold, add suffix B to model number (example, RDLP-815DB). Other cordset options available, see EZ-SCREEN LP manual (p/n 140044). Removable Disconnect Connector with Flying Leads Model RDLP-815D Length 4.5 m RDLP-825D 8m RDLP-850D 15 m RDLP-875D 23 m RDLP-8100D 30 m 8-Pin M12/Euro QD with Flying Leads Cable Type 8-conductor (22-ga.) Removable Disconnect Connector with M12/Euro QD Model Length 0.3 m DELPE-81D QDE-815D Length 4.5 m QDE-825D 8m QDE-850D 15 m QDE-875D 23 m QDE-8100D 30 m Model Length 0.3 m DEE2R-81D DELPE-83D 1m DEE2R-83D 1m DELPE-88D 2.4 m DEE2R-88D 2.4 m DELPE-815D 4.6 m DEE2R-815D 4.5 m DELPE-825D 8m DEE2R-825D 8m DELPE-850D 15 m DEE2R-850D 15 m DELPE-875D 23 m DEE2R-875D 23 m DELPE-8100D 30 m DEE2R-8100D 30 m 8-conductor (22-ga.) cordset with removable disconnects for connection of 2nd, 3rd and 4th sensor in series Model Cable Type Model CSB-M1281M1281 Branches (Female) Trunk (Male) 0.3 m DELP-110E DELP-111E 0.3 m CSB-M12815M1281 DELP-113E 1m CSB-M12825M1281 8m DELP-118E 2.4 m CSB-UNT825M1281 8 m unterminated DELP-1115E 4.5 m DELP-1125E 8m DELP-1150E 15 m DELP-1175E 23 m DELP-11100E 30 m CSB-M1288M1281 t SC22-3 Safety Controller Terminal SC22-3-S Screw SC22-3-C Clamp XM Card Data Sheet Yes 133487 *Other models are available (example, USB cable, XM programming, EtherNet IP, and Modbus TCP). Interface Modules Model 2.5 m 2 x 0.3 m 5m 3 NO redundant-output contacts (6 amp) IM-T-11A 2 NO redundant-output contacts (6 amp), plus 1 NC auxiliary 62822 Model EZAC-R9-QE8 EZAC-R11-QE8 Outputs EDM Model LPA-TP-1 Terminator plug DELPE-81D Replacement pigtail for P8 models 3 NO Selectable 1- or 21 NO & 1 NC channel or no EDM 120321 Mechanically Linked Contactors Model Description 11-BG00-31-D-024 3 NO, 1 NC (10 amp) BF1801L-024 3 NO, 1 NC (18 amp) Banner Engineering Corp. EZ-SCREEN : Best-in-Class, Two-Piece Safety Light Curtains Data Sheet * Type 4 and Type 2 point-of-operation guarding * Perimeter and access guards * Single point for entry/exit * Cascading models * Easy setup, alignment and maintenance * Unique mounting and retrofit options 111881 www.bannerengineering.com 9714 Tenth Avenue North * Minneapolis, Minnesota 55441 * (763) 544-3164 * Fax: (763) 544-3213 Toll-free: 888-373-6767 * www.bannerengineering.com * Email: sensors@bannerengineering.com P/N 142815 Simple, two-piece integrated design 26 mm Superior optical design for easy system alignment Convenient setup without a PC, disassembly or additional devices Easily configured Reduced Resolution and Fixed Blanking External Device Monitoring Exceeds OSHA/ANSI Control Reliability requirements, certified to cULus NIPF, and CE certified to Type 4, Category 4 PLe and SIL 3 Two solid-state OSSD safety outputs; includes selectable trip/latch output User configurable Aux output Flexible wiring scheme for allowing "swapable" emitters and receivers 28 mm Flexible Cascading 8-conductor (22-ga.) Allows four systems--of any length and resolution--to be connected in series, forming a single safety device Guards multiple sides of machine, such as L- or U-shaped configuration Provides continuous detection without overlapping light curtains or protruding cables Compact design and flexible mounting options deliver an exact fit with no dead zone. (R) Description (R) Data Sheet Cable Type Description Data Sheet 2 NO redundant-output contacts (6 amp), plus MMD-TA-12B 1 NC auxiliary 116390 MMD-TA-11B 2 PNP solid-state safety outputs (0.5 amp each) AC Interface Box * Hard-wired AC Power, Output and EDM Connections * 8-pin M12/Euro-style QD Emitter/Receiver Connection 8-conductor (22-ga.) Model Data Sheet IM-T-9A Cable Type MMD Muting Modules Replacement Parts Description 8-conductor (22-ga.) 8-Pin M12/Euro QD Splitter Length 0.05 m 11-conductor (24-ga.) Safety light screen for end-to-end detection Cable Type 8-Pin M12/Euro QD (Double-Ended) Cable Type Removable Disconnect Connector (Double-Ended): Cascade Model* Model Low-profile design with proven EZ-SCREEN (R) performance The EZ-SCREEN line of robust safety light curtains now includes models for continuous detection along the entire light screen length. The space-saving, compact profile of the EZ-SCREEN LP is ideal for smaller machines, yet robust enough to meet the demands of large power presses. Plus, with several housing finishes, cascading and many mounting options, EZ-SCREEN LP provides a perfect fit for a wide range of safeguarding applications. Features compact 28 x 26 mm housing Identifies blocked beams using zone indicators P ositions first and last beam at the ends for continuous sensing F eatures 7-segment display with diagnostic information and number of blocked beams Includes 14 or 25 mm resolution models ffers defined areas from 270 to 1810 mm O with detection ranges up to 7 m P resents system status and alignment using highly visible LEDs (bi-color) Includes models with nickel-plated housing for ESD-safe applications, clear anodized aluminum housing or "safety" yellow powder-coat housing P rovides response times as fast as 8 milliseconds bannerengineering.com Mounting Versatility Space-saving design for a perfect fit Brackets included for end mounting or side mounting with no dead zone Brackets rotate for fine alignment Inline and L-brackets for mounting with no "gap" on 25 mm systems Optional brackets for mounting inside P1000 Unistrut(R) metal framing Multi-directional routing of cables for easy integration into machinery www.bannerengineering.com 1.888.373.6767