APT12080JVR 15A 0.800 1200V POWER MOS V TM S S Power MOS VTM is a new generation of high voltage N-Channel enhancement mode power MOSFETs. This new technology minimizes the JFET effect, increases packing density and reduces the on-resistance. Power MOS VTM also achieves faster switching speeds through optimized gate layout. 27 2 T- D G SO ISOTOP(R) * Faster Switching * 100% Avalanche Tested * Lower Leakage * Popular SOT-227 Package D G S MAXIMUM RATINGS Continuous Drain Current @ TC = 25C 1 Pulsed Drain Current VGS Gate-Source Voltage Continuous T J,TSTG Gate-Source Voltage Transient Total Power Dissipation @ TC = 25C Linear Derating Factor Lead Temperature: 0.063" from Case for 10 Sec. IAR Avalanche Current 30 450 Watts 3.6 W/C C 15 EL 1 Single Pulse Avalanche Energy Volts 40 (Repetitive and Non-Repetitive) Repetitive Avalanche Energy Amps 60 300 Amps 50 4 mJ 2500 PR EAS 1 15 -55 to 150 Operating and Storage Junction Temperature Range TL E AR Volts IM PD 1200 Drain-Source Voltage IDM V GSM UNIT RY ID APT12080JVR A VDSS Parameter IN Symbol All Ratings: TC = 25C unless otherwise specified. STATIC ELECTRICAL CHARACTERISTICS BVDSS ID(on) RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions MIN Drain-Source Breakdown Voltage (V GS = 0V, ID = 250A) 1200 Volts 15 Amps On State Drain Current 2 (VDS > ID(on) x R DS(on) Max, VGS = 10V) Drain-Source On-State Resistance 2 TYP (VGS = 10V, 0.5 I D[Cont.]) MAX 0.800 Zero Gate Voltage Drain Current (VDS = VDSS , VGS = 0V) 25 Zero Gate Voltage Drain Current (VDS = 0.8 V DSS, VGS = 0V, TC = 125C) 250 Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA) UNIT Ohms A 100 nA 4 Volts 2 CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. USA 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 EUROPE Avenue J.F. Kennedy Bat B4 Parc Cadera Nord 050-5576 Rev - Symbol DYNAMIC CHARACTERISTICS Symbol APT12080JVR Characteristic Test Conditions MIN TYP Ciss Input Capacitance V GS = 0V 6600 Coss Output Capacitance VDS = 25V 560 Crss Reverse Transfer Capacitance f = 1 MHz 270 Qg Total Gate Charge Gate-Drain ("Miller ") Charge td(on) Turn-on Delay Time td(off) tf 300 28 ID = ID[Cont.] @ 25C 150 Gate-Source Charge Qgd tr VGS = 10V V DD = 0.5 VDSS VGS = 15V 16 V DD = 0.5 VDSS 12 ID = ID[Cont.] @ 25C 59 R G = 0.6 12 Rise Time Turn-off Delay Time Fall Time RY Q gs 3 SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS IS ISM Characteristic / Test Conditions MIN Continuous Source Current (Body Diode) (Body Diode) V SD Diode Forward Voltage 2 (VGS = 0V, IS = -ID[Cont.]) t Reverse Recovery Time (IS = -ID[Cont.], dlS /dt = 100A/s) IM Characteristic MIN PR Symbol R JC Junction to Case RJA Junction to Ambient C TYP SOT-227 (ISOTOP(R)) Package Outline 11.8 (.463) 12.2 (.480) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 050-5576 Rev - 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 1.95 (.077) 2.14 (.084) * Source 30.1 (1.185) 30.3 (1.193) * Source ISOTOP(R) is a Registered Trademark of SGS Thomson. Drain * Source terminals are shorted internally. Current handling capability is equal for either Source terminal. 38.0 (1.496) 38.2 (1.504) Dimensions in Millimeters and (Inches) Gate Volts 22 APT Reserves the right to change, without notice, the specifications and information contained herein. W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) Amps ns MAX 3 See MIL-STD-750 Method 3471 4 Starting T = +25C, L = 22.22mH, R = 25, Peak I = 15A j G L 31.5 (1.240) 31.7 (1.248) UNIT 1080 40 temperature. 2 Pulse Test: Pulse width < 380 S, Duty Cycle < 2% r = 4.0 (.157) (2 places) MAX 0.28 1 Repetitive Rating: Pulse width limited by maximum junction 7.8 (.307) 8.2 (.322) ns 60 Reverse Recovery Charge (IS = -ID[Cont.], dl S/dt = 100A/s) THERMAL CHARACTERISTICS nC 1.3 EL Q rr UNIT pF 15 IN Pulsed Source Current 1 rr TYP A Symbol MAX UNIT C/W