Preliminary SF2137E-1 * Steep Roll-off Filter for 869.00 MHz Unlicensed Band * Complies with Directive 2002/95/EC (RoHS) * No Matching Required for Operation in 50 Environment 869.00 MHz SAW Filter Pb Absolute Maximum Ratings Rating Value Units Input Power Level 14 dBm DC Voltage on any Non-ground Terminal 5 V Operating Temperature Range -30 to +65 C Storage Temperature Range in Tape and Reel -40 to +85 C 265 C Maximum Soldering Profile, 5 Cycles/10 seconds Maximum SM3030-6 Electrical Characteristics Characteristic Sym Center Frequency fC Notes Min 869.00 Insertion Loss, 868 to 870 MHz IL 2.7 3.5 dB 0.2 0.7 dBP-P Amplitude Ripple, 868 to 870 MHz Typ Max Units MHz Attenuation Referenced to 0 dB: DC to 828 MHz 45 51 828 to 849 MHz 30 40 881 to 890 MHz 22 35 890 to 925 MHz 22 38 925 to 1200 MHz 40 49 1200 to 1740 MHz 36 dB 49 Source Impedance ZS 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization, Y=year, WW=week, S=shift, Dot=pin 1 indicator Standard Reel Quantity 994, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Terminals Port 1 2 Port 2 5 Case Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. Page 1 of 5 SF2137E-1 2/8/11 www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. Page 2 of 5 SF2137E-1 2/8/11 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.40 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Max 0.123 0.123 0.055 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free Top View Bottom View B 1 3 6 994 YWWS A 2 5 E 4 D www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 3 of 5 SF2137E-1 2/8/11 "B" "B" REF. 100 REF. Tape and Reel Specifications Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions 2.0 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm 4.0 PIN #1 A 1.50 1.75 0.3 0.05 Ao Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 4 of 5 SF2137E-1 2/8/11 Typical Solder Reflow Profile R a m p u p 3 0 0 P re h e a t R e flo w C o o l D o w n T e m p e ra tu re (d e g C ) 2 5 0 2 0 0 1 5 0 1 0 0 5 0 0 0 6 0 1 2 0 1 8 0 2 4 0 3 0 0 3 6 0 T im e (s e c o n d s ) www.RFM.com E-mail: info@rfm.com (c)2009-2011 by RF Monolithics, Inc. Page 5 of 5 SF2137E-1 2/8/11