2N7334 IRFG110 MECHANICAL DATA Dimensions in mm (inches) 14 LEAD DUAL IN LINE QUAD N-CHANNEL POWER MOSFETS 19.507 0.432 (0.768 0.017) 0.457 0.102 (0.018 0.004) 14 6.426 0.305 (0.253 0.012) 9.525 0.635 (0.375 0.025) 2.134 (0.084) 8 BVDSS 100V ID(cont) RDS(on) 1A 0.7 FEATURES 1 7 * AVALANCHE ENERGY RATED * HERMETICALLY SEALED * DYNAMIC dv/dt RATING 1.422 0.102 (0.056 0.004) 2.54 (0.100) * SIMPLE DRIVE REQUIREMENTS 14 LEAD MOULDED DIP PACKAGE * FOR AUTOMATIC INSERTION N-CHANNEL N-CHANNEL N-CHANNEL N-CHANNEL * SIMPLE DRIVE REQUIREMENTS 1--Drain 1 2--Source 1 3--Gate 1 * EASE OF PARALLELING 5--Gate 2 6--Source 2 7--Drain 2 11,4--NC 8--Drain 3 9--Source3 10--Gate 3 12--Gate 4 13--Source 4 14--Drain 4 * 4 N-CHANNEL CO-PACKAGED HEXFETS * LIGHTWEIGHT ABSOLUTE MAXIMUM RATINGS(Tcase = 25C unless otherwise stated) VGS ID ID IDM PD EAS dv/dt TJ , Tstg RJC RJCA Gate - Source Voltage Continuous Drain Current (VGS = 10V , Tcase = 25C) Continuous Drain Current (VGS = 10V , Tcase = 100C) Pulsed Drain Current Power Dissipation @ Tcase = 25C Linear Derating Factor Single Pulse Avalanche Energy 2 Peak Diode Recovery 3 Operating and Storage Temperature Range Thermal Resistance Junction to Case Thermal Resistance Junction-to-Ambient 20V 1.A 0.6A 4A 1.4W 0.011W/C 75mJ 5.5V/ns -55 to 150C 6.25C/W 175C/W Notes 1) Pulse Test: Pulse Width 300s, 2% 2) @ VDD = 25V , L 112mH , RG = 25 , Peak IL = 1A , Starting TJ = 25C 3) @ ISD 1A , di/dt 75A/s , VDD BVDSS , TJ 150C , Suggested RG = 24 Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5829 Issue 1 2N7334 IRFG110 ELECTRICAL CHARACTERISTICS Parameter BVDSS Test Conditions STATIC ELECTRICAL RATINGS Drain - Source Breakdown Voltage BVDSS Temperature Coefficient of TJ (Tamb = 25C unless otherwise stated) VGS = 0 ID = 1mA Min. Typ. Max. V 100 Reference to 25C V / C 0.13 Breakdown Voltage ID = 1mA Static Drain - Source On-State VGS = 10V ID = 0.6A 0.70 Resistance VGS = 10V ID = 1A 0.80 VGS(th) Gate Threshold Voltage VDS = VGS ID = 250A 2 gfs Forward Transconductance VDS 15V IDS = 0.60A 0.86 IDSS Zero Gate Voltage Drain Current VGS = 0 VDS = 0.8VDSS 25 TJ = 125C 250 IGSS Forward Gate - Source Leakage VGS = 20V 100 IGSS Reverse Gate - Source Leakage VGS = -20V -100 RDS(on) Unit 4 V () S( A nA DYNAMIC CHARACTERISTICS Ciss Input Capacitance VGS = 0 180 Coss Output Capacitance VDS = 25V 82 Crss Reverse Transfer Capacitance f = 1MHz 15 Qg Total Gate Charge VGS = 10V Qgs Gate - Source Charge VDS = 0.5VDS Qgd Gate - Drain ("Miller") Charge td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time ID = 1A pF 15 7.5 nC 7.5 20 VDD = 50V 25 ID = 1A 40 RG = 24 ns 40 SOURCE - DRAIN DIODE CHARACTERISTICS IS 1 Continuous Source Current 2 ISM Pulse Source Current VSD Diode Forward Voltage 1 trr Reverse Recovery Time IF = 1A Qrr Reverse Recovery Charge di / dt 100A/s VDD 50V ton Forward Turn-On Time LD PACKAGE CHARACTERISTICS Internal Drain Inductance (from centre of drain pad to die) 4.0 LS Internal Source Inductance (from centre of source pad to end of source bond wire) 6.0 4 IS = 1.0A TJ = 25C VGS = 0 TJ = 25C A 1.5 V 200 ns 0.83 C Negligible nH Notes 1) Pulse Test: Pulse Width 300s, 2% 2) Repetitive Rating - Pulse width limited by maximum junction temperature. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5829 Issue 1