!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. R50E13.pdf 04.6.11 Trimmer Potentiometers Murata Manufacturing Co., Ltd. Cat.No.R50E-13 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CONTENTS 1 Part Numbering 2 Selection Guide of Trimmer Potentiometers 4 1 2 3 4 5 6 7 8 9 SMD Open Type 2mm Size PVZ2 Series 5 PVZ2 Series Notice 7 SMD Open Type 3mm Size PVZ3/PVS3/PVA3 Series 9 PVZ3/PVS3/PVA3 Series Notice 16 SMD Sealed Type 2mm Size PVF2 Series 19 PVF2 Series Notice 21 SMD Sealed Type 3mm Size PVG3 Series 23 PVG3 Series Notice 26 SMD Sealed Type 4mm Size PVM4 Series 28 PVM4 Series Notice 31 SMD Sealed Type Multi-turns PVG5/PV01 Series 33 PVG5/PV01 Series Notice 39 Lead Sealed Type Single-turn PVC6/PV32/PV34 Series 41 PVC6/PV32/PV34 Series Notice 52 Lead Sealed Type Multi-turns PV12/PV37/PV23/PV22/PV36 Series 54 PV12/PV37/PV23/PV22/PV36 Series Notice 71 Angle Sensing Potentiometer SMD Dust-proof Type 12mm Size PVS1 Series 73 PVS1 Series Notice 75 SMD Open Type and SMD Sealed Type PVM4A_C01 Series Specifications and Test Methods 77 SMD Sealed Type/Lead Sealed Type Specifications and Test Methods 79 Angle Sensing Potentiometer Specifications and Test Methods 82 Packaging 83 Recommended Adjustment Tools/Qualified Standards 88 2 3 4 5 6 7 8 9 * The RoHS compliance means that we judge from EU Directive 2002/95/EC the products do not contain lead, cadmium, mercury, hexavalent chromium, PBB and PBDE, except exemptions stated in EU Directive 2002/95/EC annex and impurities existing in natural world. * This statement does not insure the complaince of any of the listed parts with any laws or legal imperatives developed by any EU members individually with regards to the RoHS Directive. Recycled Paper R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. o Part Numbering Trimmer Potentiometers (Part Number) PV Z3 A 103 q w e r A01 R00 t y Lead Sealed 19mm Rectangular 15-turns 23 qProduct ID Product ID PV Trimmer Potentiometers Lead Sealed 10mm Square 25-turns 36 wSeries eAdjustment Direction /Lead Type Code Z2 Z3 Series SMD Open 2mm Size SMD Open 3mm Size Code A Top Top A Top, J-hook G3 SMD Sealed 3mm Size G Top, Gull-wing K Rear M4 SMD Sealed 4mm Size A Top G5 SMD Sealed 5mm Square 11-turns A Top H Side P Side 01 SMD Sealed 6mm Square 12-turns W Top X Side A Top, Triangle D Top, Triangle E Side, Triangle G Side, Triangle H Side, Triangle M Top, Inline Q Side, Inline H Top, Triangle P 22 Side, Triangle Top, Triangle Y Top, Inline P Side, Triangle X Side, Triangle Z Side, Inline rTotal Resistance Top Lead Sealed 31mm Rectangular 22-turns Z W Expressed by three figures. The unit is ohm. The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. A 12 Side, Inline Rear A Lead Sealed 7mm Round 4-turns Side, Triangle X R SMD Open 3mm Size Lead Sealed 9mm Square Single-turn P Rear SMD Sealed type 2mm Size 34 Top, Triangle K F2 Lead Sealed 6mm Round Single-turn Top, Inline Y Top A3 32 Side, Triangle Rear Top C6 Y W K A Lead Sealed 6mm Square Single-turn Lead Sealed 6mm Square 12-turns 37 Side, Triangle A SMD Open 3mm Size Stopper Low-profile S3 2 Adjustment Direction/ Lead Type P Top, Triangle R Top, Inline N Side, Triangle T Side, Triangle S Side, Triangle F Top, Triangle P Top, Triangle H Side, Triangle X Side, Triangle W Side, Inline H Top, Triangle P Top, Triangle T Side, Triangle S Side, Triangle L Side S Side, Inline Y Side, Triangle Ex.) Code Total Resistance 100 10ohm 102 1000ohm 104 100000ohm (=100kohm) tIndividual Specification Code Series Individual Specification Code A01 PVZ2/PVZ3/PVS3/ PVA3/PV32/PV12 Standard Type PVG3/PVM4/PVG5/PV01/ C01 PVC6/PV34/PV22/PV23/ PV36/PV37 Standard Type A04 PVZ2 Ultra-thin Type C01 PVZ3 High-heat Resistance Type (for Top Adjustment) E01 PVZ3 High-heat Resistance Type (for Rear Adjustment) D01 PVM4 High-liability Type C31 PV36/PV37 Radial Taping C04 PVC6 Radial Taping A11 PVF2 Standard Type (Resistance Change Characteristics : Linear) A41 PVF2 Standard Type (Resistance Change Characteristics : Log curve) A81 PVF2 Standard Type (Resistance Change Characteristics : Log curve) A51 PVF2 Standard Type (Resistance Change Characteristics : Log-log curve) A91 PVF2 Standard Type (Resistance Change Characteristics : Log-log curve) yPackaging Code Packaging A00 Ammo Pack B00 Bulk M00* Magazine R00 Reel * M12 for PV36P Type and M15 for PV36W/Y/X/Z Type. R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Angle Sensing Potentiometers (Part Number) PV S1 A 103 w e r q A01 R00 t y tIndividual Specification Code qProduct ID Product ID PV Code Individual Specification Code Trimmer Potentiometers A01 SMD Type Standard (Rotary Position Sensor) A03 Lead Type Standard wSeries yPackaging Code Series Code Packaging S1 Dust-proof Type 12mm Size B00 Bulk R00 Reel T00 Tray eTerminal Shape Code Terminal Shape A SMD Type L Lead Type rTotal Resistance Expressed by three figures. The unit is ohm. The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex.) Code Total Resistance 103 10000 ohm (=10k ohm) PVS1 Series will be changed to new part number since Oct. 1, 2004. Details is as follows. (Part Number) SV 01 A 103 q w e r AE A01 R00 t y u tRotor Hole Shape/Rotor Hole Size qProduct ID Product ID SV Code Rotary Position Sensor wSeries Code Series 01 Carbon Rotary Position Sensor eTerminal Shape Code Terminal Shape A SMD Type L Lead Type rTotal Resistance Expressed by three figures. The unit is ohm. The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. Ex.) Code Total Resistance 103 10000 ohm (=10k ohm) Rotor Hole Shape/Rotor Hole Size AD D Hole/3.5mm Dia. AE D Hole/4.0mm Dia. CE T Hole/4.0mm Dia. yIndividual Specification Code Code Individual Specification Code A01 SMD Type Standard A03 Lead Type Standard uPackaging Code Packaging B00 Bulk R00 Reel T00 Tray 3 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Selection Guide of Trimmer Potentiometers Start Mounting Method Surface Mount PCB Insertion Sealed Construction Construction Adjustment Open Sealed Resistive Element Resistive Element Carbon Top Cermet Resistive Element Cermet Carbon 2mm size Single Turn 3mm size Single Turn 2mm size Single Turn 3mm size Single Turn 6mm size Single Turn 6mm size Single Turn Low Height for Automatic Adjustment with Rotational Stop with Rotational Stop for Automatic Adjustment with Rotational Stop with Rotational Stop with Rotational Stop PVS3 PVF2 PVG3A PVC6A/D/M PVC6E/G/H/Q 7mm size 4 Turns 7mm size 4 Turns PV12H/P PV12T/S 6mm size 12 Turns 6mm size 12 Turns PVG3K PV37W/Y PV37P/X/Z 4mm size Single Turn 10mm size 25 Turns 10mm size 25 Turns PV36W/Y PV36P/X/Z (0.85mm max.) PVZ2A_A04 Cermet Side (1.0mm max.) PVZ2A_A01 with Rotational Stop Rear Adjustment PVA3 PVG3G PVZ2K 3mm size Single Turn Rear Adjustment with Rotational Stop for Automatic Adjustment PVZ3A Rear Adjustment PVZ3K Rear Adjustment Low profile (1.5mm max.) PVZ3R 4 PVM4 5mm size 11 Turns 19mm size 15 Turns PVG5 PV23P/Y R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers 1 SMD Open Type 2mm Size PVZ2 Series 2 2.1 Features 0.8 0.5 2.4 Dia. 1 #2 Soldering Part 0.4 0.5 4 1 1.3 2.2 2.70.3 0.5 0.450.1 1. Ultra-small and thin external dimensions of 2.1(W)x2.7(L)x0.85 max. (T)mm. (PVZ2A_A04 Series) 2. Au plated termination achieves a high density P.C.B. mounting. 3. Cross-shaped driver slot allows for in-process automatic adjustment and it provides superior adjustability. 4. Two-piece parts construction achieves low cost and excellent quality. 5. Special resin substrate allows high peak temperature for reflow soldering. #1 #3 0.55 0.7 0.55 #2 #1 CLOCKWISE PVZ2A #3 1 Driver Plate Rotation Area : Please do not place any components more than 0.7mm in height within this area. 2 PVZ2A_A01 : 0.90.1 in mm PVZ2A_A04 : 0.80.05 Tolerance : 0.2 ( 2.1 0.8 ) +0.1 0.9-0.2 #2 2.4 Dia. *1 0.450.1 1.3 2.2 5.4 2. LCD 4. PHS 6. DVC 8. Portable audio, etc. Soldering Part (1.0) 1. Pick-up module 3. Cellular-phone 5. Pager 7. Digital camera (1.0) Applications #1 #3 0.65 0.6 0.65 PVZ2K #2 1. Driver Plate Rotation Area : Please do not place any components more than 0.7mm in height within this area. #1 CLOCKWISE mm (Tolerancein: 0.2 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVZ2p501A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 500ohm 30% 500ppm/C PVZ2p102A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 1k ohm 30% 500ppm/C PVZ2p202A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 2k ohm 30% 500ppm/C PVZ2p302A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 3k ohm 30% 500ppm/C PVZ2p502A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 5k ohm 30% 500ppm/C PVZ2p103A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 10k ohm 30% 500ppm/C PVZ2p203A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 20k ohm 30% 500ppm/C PVZ2p303A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 30k ohm 30% 500ppm/C PVZ2p503A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 50k ohm 30% 500ppm/C PVZ2p104A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 100k ohm 30% 500ppm/C PVZ2p204A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 200k ohm 30% 500ppm/C PVZ2p304A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 300k ohm 30% 500ppm/C PVZ2p504A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 500k ohm 30% 500ppm/C PVZ2p105A01 0.1W(50C) Reflow/Soldering Iron 1(24010) 1M ohm 30% 500ppm/C PVZ2p501A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 500ohm 30% 500ppm/C PVZ2p102A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 1k ohm 30% 500ppm/C PVZ2p202A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 2k ohm 30% 500ppm/C PVZ2p302A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 3k ohm 30% 500ppm/C PVZ2p502A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 5k ohm 30% 500ppm/C PVZ2p103A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 10k ohm 30% 500ppm/C PVZ2p203A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 20k ohm 30% 500ppm/C PVZ2p303A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 30k ohm 30% 500ppm/C PVZ2p503A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 50k ohm 30% 500ppm/C PVZ2p104A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 100k ohm 30% 500ppm/C PVZ2p204A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 200k ohm 30% 500ppm/C Part Number #3 Continued on the following page. 5 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. 1 Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVZ2p304A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 300k ohm 30% 500ppm/C PVZ2p504A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 500k ohm 30% 500ppm/C PVZ2p105A04 0.1W(50C) Reflow/Soldering Iron 1(24010) 1M ohm 30% 500ppm/C Part Number The blank column is filled with the code of adjustment direction A (top) or K (rear). Construction Standard Land Pattern PVZ2A PVZ2A 0.6 0.7 1.55 0.85 0.85 1.55 0.9 0.6 mm (Tolerancein: 0.1 ) Construction Standard Land Pattern PVZ2K PVZ2K 0.9 0.7 #2-Terminal Driver Plate 2.9 3.4 Dia. #1-Terminal 0.7 2.9 Wiper Resistive Element 0.7 0.6 Resin Substrate #3-Terminal Characteristics Humidity Exposure Res. Change : +10, -2% High Temperature Res. Change : R< =50kohm***+2, -10% Exposure Humidity Load Life Load Life Temperature Cycle Temperature Coefficient of Resistance Rotational Life 6 50kohm<R***+2, -15% Res. Change : 10% Res. Change : R< =50kohm***+2, -10% 50kohm<R***+2, -15% Res. Change : 5% 500ppm/C Res. Change : 10% (10 cycles) 0.7 mm (Tolerancein: 0.1 ) catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVZ2 Series Notice 1 Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40 deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. If you use the trimmer potentiometer in an environment other than listed below, please consult with a Murata factory representative prior to using. The trimmer potentiometer should not be used under the following environmental conditions: (1) Corrosive gaseous atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Rating) 1. When using with partial load (rheostat), minimize the power depending on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P.R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. 4. If the trimmer potentiometer is used in DC and high humidity conditions, please connect wiper (#2) for plus and resistive element (#1 or #3) for minus. Notice (Soldering and Mounting) 1. Soldering (1) Reflow soldering and Soldering Iron are available. Cannot be soldered using the flow soldering method. If you use the flow soldering method, the trimmer potentiometer may not function. (2) Use our standard land dimension. Excessive land area causes displacement due to the effect of the surface tension of the solder. Insufficient land area leads to insufficient soldering strength of the chip. (3) Standard soldering condition (a) Reflow soldering : Refer to the standard temperature profile. (b) Soldering iron: >Temperature of tip 360 deg. C max. >Soldering time 3 sec. max. >Diameter 1mm max. >Wattage of iron 30W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer potentiometer may deviate from the specified characteristics. (4) Apply the appropriate amount of solder paste. The thickness of solder paste should be printed from 100 micro m to 150 micro m and the dimension of land pattern used should be Murata's standard land pattern at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals. (5) The soldering iron should not come in contact with the case of the trimmer potentiometer. If such contact does occur, the trimmer potentiometer may be damaged. 2. Mounting (1) Do not apply excessive force (preferably 4.9N (Ref.; 500gf) max.), when the trimmer potentiometer is mounted to the PCB. (2) Do not warp and/or bend PC board to prevent trimmer potentiometer from breakage. (3) In chip placers, the recommended size of the cylindrical pick-up nozzle should be outer dimension 1.5-1.8mm dia. and inner dimension 1.3mm dia. 3. Cleaning (1) In case there is flux on the resistive element, clean sufficiently with cleaning solvents and completely remove all residual flux. (2) Isopropyl-alcohol and Ethyl-alcohol are Continued on the following page. 7 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVZ2 Series Notice 1 Continued from the preceding page. applicable solvents for cleaning. If you use any other types of solvents, please evaluate performance by your product. Reflow Soldering Standard Profile For reflow soldering Pre-heating (in the air) Soldering Gradual Cooling (in the air) Temperature (C) 230 200 100 0 60-120 sec. 30 sec. max. Time (Melting zone) Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. We recommend the screwdriver below. * Recommended screwdriver for manual adjustment PVZ2A_A01=Murata P/N : KMDR090 PVZ2A_A04=Murata P/N : KMDR150 2. Don't apply more than 4.9N (Ref.; 500gf) of twist and stress after mounting onto PCB to prevent contact intermittence. If excessive force is applied, the trimmer potentiometer may not function. Notice (Other) 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata cannot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 8 3. Please use within the effective rotational angle. The potentiometer does not have a mechanical stop for over rotation. In cases out of effective rotational angle, the trimmer potentiometer may not function. 4. When using a lock paint to fix slot position, please consult with a Murata factory representative prior to using to prevent corrosion and contact intermittence. R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers SMD Open Type 3mm Size PVZ3/PVS3/PVA3 Series 2 PVZ3 Series 2.2 Dia. #2 3.0 Dia. 0.75 #1 1.0 #3 0.250.1 0.1max. 0.75 0.7 #2 #1 #3 CLOCKWISE 0.7 PVZ3A mm (Tolerancein: 0.3 ) 2.1 1.850.1 3.1 0.250.1 3.2 #2 #3 #1 Soldering part 1.15 Dia. 2.2 Dia. 3.0 Dia. 2. Cordless telephones 4. FDD 6. CD-ROMs 8. TFT-LCD TV sets PVZ3K 0.85 0.9 0.85 #2 (Wiper Contact) #1 #3 CLOCKWISE CIRCUIT 0.50.1 5.4 4.4 2.40.1 1.1 Applications mm ( Tolerance in: 0.3 ) 1.40.1 0.50.1 3.1 #2 5.8 0.5 3.2 0.5 1. Optical pick up 3. CD players 5. Motor 7. Car stereos 9. Headphone stereos 1.850.1 3.2 1.0 3.6 0.50.1 1. Excellent solderability characteristics are achieved via special plating techniques on each termination. 2. Specially designed substrate prevents wicking of flux onto the top of the part body. 3. Funnel shaped adjustment slot allows for in-process automatic adjustment. 4. High-heat resistance type is available (PVZ3A_C01/PVZ3K_E01/PVZ3R_E01). 5. Enlarged bottom termination enhance soldering strength while reducing the necessary land area required promoting high-density PCB mounting. 6. Flat surface is provided for smooth pick and place (PVZ3K only). 7. The standard position of driver plate is adjusted at the center normally, but another position is also available. 8. This product meets Pb-free. 1.15 Dia. 2.40.1 Features 3.1 #3 #1 1.1 Soldering part 0.50.1 2.40.1 1.15 Dia. 2.2 Dia. 3.0 Dia. PVZ3R 0.85 0.9 0.85 #2 (Wiper Contact) #1 #3 CLOCKWISE CIRCUIT mm ( Tolerance in: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVZ3A201p 0.1W(50C) Reflow/Soldering Iron 1(23010) 200ohm 30% 500ppm/C PVZ3A301p 0.1W(50C) Reflow/Soldering Iron 1(23010) 300ohm 30% 500ppm/C PVZ3A501p 0.1W(50C) Reflow/Soldering Iron 1(23010) 500ohm 30% 500ppm/C PVZ3A102p 0.1W(50C) Reflow/Soldering Iron 1(23010) 1k ohm 30% 500ppm/C PVZ3A202p 0.1W(50C) Reflow/Soldering Iron 1(23010) 2k ohm 30% 500ppm/C PVZ3A302p 0.1W(50C) Reflow/Soldering Iron 1(23010) 3k ohm 30% 500ppm/C PVZ3A502p 0.1W(50C) Reflow/Soldering Iron 1(23010) 5k ohm 30% 500ppm/C PVZ3A103p 0.1W(50C) Reflow/Soldering Iron 1(23010) 10k ohm 30% 500ppm/C PVZ3A203p 0.1W(50C) Reflow/Soldering Iron 1(23010) 20k ohm 30% 500ppm/C PVZ3A303p 0.1W(50C) Reflow/Soldering Iron 1(23010) 30k ohm 30% 500ppm/C Part Number Continued on the following page. 9 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) PVZ3A503p 0.1W(50C) Reflow/Soldering Iron PVZ3A104p 0.1W(50C) Reflow/Soldering Iron PVZ3A204p 0.1W(50C) PVZ3A304p Part Number 2 Total Resistance Value TCR 1(23010) 50k ohm 30% 500ppm/C 1(23010) 100k ohm 30% 500ppm/C Reflow/Soldering Iron 1(23010) 200k ohm 30% 500ppm/C 0.1W(50C) Reflow/Soldering Iron 1(23010) 300k ohm 30% 500ppm/C PVZ3A504p 0.1W(50C) Reflow/Soldering Iron 1(23010) 500k ohm 30% 500ppm/C PVZ3A105p 0.1W(50C) Reflow/Soldering Iron 1(23010) 1M ohm 30% 500ppm/C PVZ3A205p 0.1W(50C) Reflow/Soldering Iron 1(23010) 2M ohm 30% 500ppm/C PVZ3K201E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 200ohm 30% 500ppm/C PVZ3K301E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 300ohm 30% 500ppm/C PVZ3K501E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 500ohm 30% 500ppm/C PVZ3K102E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 1k ohm 30% 500ppm/C PVZ3K202E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 2k ohm 30% 500ppm/C PVZ3K302E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 3k ohm 30% 500ppm/C PVZ3K502E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 5k ohm 30% 500ppm/C PVZ3K103E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 10k ohm 30% 500ppm/C PVZ3K203E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 20k ohm 30% 500ppm/C PVZ3K303E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 30k ohm 30% 500ppm/C PVZ3K503E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 50k ohm 30% 500ppm/C PVZ3K104E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 100k ohm 30% 500ppm/C PVZ3K204E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 200k ohm 30% 500ppm/C PVZ3K304E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 300k ohm 30% 500ppm/C PVZ3K504E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 500k ohm 30% 500ppm/C PVZ3K105E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 1M ohm 30% 500ppm/C PVZ3K205E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 2M ohm 30% 500ppm/C PVZ3R201E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 200ohm 30% 500ppm/C PVZ3R301E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 300ohm 30% 500ppm/C PVZ3R501E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 500ohm 30% 500ppm/C PVZ3R102E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 1k ohm 30% 500ppm/C PVZ3R202E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 2k ohm 30% 500ppm/C PVZ3R302E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 3k ohm 30% 500ppm/C PVZ3R502E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 5k ohm 30% 500ppm/C PVZ3R103E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 10k ohm 30% 500ppm/C PVZ3R203E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 20k ohm 30% 500ppm/C PVZ3R303E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 30k ohm 30% 500ppm/C PVZ3R503E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 50k ohm 30% 500ppm/C PVZ3R104E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 100k ohm 30% 500ppm/C PVZ3R204E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 200k ohm 30% 500ppm/C PVZ3R304E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 300k ohm 30% 500ppm/C PVZ3R504E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 500k ohm 30% 500ppm/C PVZ3R105E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 1M ohm 30% 500ppm/C PVZ3R205E01 0.1W(50C) Reflow/Soldering Iron 1(23010) 2M ohm 30% 500ppm/C The blank column is filled with the code of individual specification A01 (standard type) and C01 (high-heat resistance type). 10 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Construction Standard Land Pattern PVZ3A PVZ3A 1.9 0.9 1.1 0.9 1.9 2 1.0 0.7 1.0 mm (Tolerance in: 0.1 ) Construction Standard Land Pattern PVZ3K PVZ3K Driver Plate 1.5 #2-Terminal 1.0 #1-Terminal a Di 1.0 4.0 3.0 Wiper Resistive Element (Carbon) #3-Terminal 0.5 3.0 mm (Tolerancein: 0.1 ) Resin Substrate Construction Standard Land Pattern PVZ3R PVZ3R Driver Plate 1.5 #2-Terminal 3.1 0.7 #1-Terminal Wiper Resistive Element (Carbon) #3-Terminal Resin Substrate 0.7 3.1 4.0 Dia. 1.25 1.25 3.0 mm (Tolerancein: 0.1 ) Characteristics Humidity Exposure Res. Change : +10, -2% High Temperature Res. Change : R< =100kohm***+2, -10% Exposure Humidity Load Life Load Life Temperature Cycle Temperature Coefficient of Resistance Rotational Life 100kohm<R***+2, -15% Res. Change : 10% Res. Change : R< =100kohm***+2, -10% 100kohm<R***+2, -15% Res. Change : 5% 500ppm/C Res. Change : 10% (10 cycles) 11 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVS3 Series 1.5 1.25 4.1Dia. 1 0.8 1. Funnel shaped slot allows for in-process automatic adjustment and it provides superior adjustability. 2. Easy insertion and operation of adjustment screwdriver 3. Low profile of 1.5mm height with stopper 4. Plated termination achieves high resistance to solder leaching. 5. Screwdrivers for adjustment are available on the market. #1 #3 1.1 0.30.1 0.7 0.85 #2 (Wiper Contact) #1 0.7 1.1 (0.3) 0.50.1 1.75 3.9 1.1 1 #3 CLOCKWISE 1.Driver Plate Rotation Area: Please do not place any components more than 0.7mm in height within this area. mm (Tolerance in: 0.3 ) CIRCUIT Applications 1. Camcorders 3. TFT-LCD TV sets 5. Cordless telephones 7. Optical cameras 2. Video disk players 4. Headphone stereos 6. Micro-motors Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVS3A101A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 100ohm 25% 250ppm/C PVS3A201A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 200ohm 25% 250ppm/C PVS3A301A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 300ohm 25% 250ppm/C PVS3A501A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 500ohm 25% 250ppm/C PVS3A102A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 1k ohm 25% 250ppm/C PVS3A202A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 2k ohm 25% 250ppm/C PVS3A302A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 3k ohm 25% 250ppm/C PVS3A502A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 5k ohm 25% 250ppm/C PVS3A103A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 10k ohm 25% 250ppm/C PVS3A203A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 20k ohm 25% 250ppm/C PVS3A303A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 30k ohm 25% 250ppm/C PVS3A503A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 50k ohm 25% 250ppm/C PVS3A104A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 100k ohm 25% 250ppm/C PVS3A204A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 200k ohm 25% 250ppm/C PVS3A304A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 300k ohm 25% 250ppm/C PVS3A504A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 500k ohm 25% 250ppm/C PVS3A105A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 1M ohm 25% 250ppm/C PVS3A205A01 0.1W(70C) Reflow/Soldering Iron 1(27010) 2M ohm 25% 250ppm/C Part Number Construction Standard Land Pattern 1.6 Driver Plate 2.4 1.5 Wiper Stopper / #2 Terminal 2.2 Stopper Resistive Element 0.9 2 3.0 Dia. 1.50.1 2 Features Soldering part 3.0 2.30.1 1.0 #2 1.2 Dia. #1 Terminal 1.1 #3 Terminal Ceramic Substrate 0.8 1.1 mm (Tolerancein: 0.1 ) Continued on the following page. 12 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Characteristics Humidity Exposure High Temperature Exposure Res. Change : 3% Res. Change : 3% Humidity Load Life Res. Change : 3% Load Life Res. Change : 3% Temperature Cycle Res. Change : 3% Temperature Coefficient of Resistance Rotational Life 2 250ppm/C Res. Change : 10% (10 cycles) 13 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVA3 Series 1.850.1 0.7 90 3.5 0.50.1 1. Funnel shaped slot allows for in-process automatic adjustment and it provides superior adjustability. 2. Easy insertion and operation of adjustment screwdriver 3. Plated termination achieves high resistance to solder leaching. 4. Screwdrivers for adjustment are available on the market. 5. Recommended for both reflow and flow soldering method. (Need cleaning for flow soldering method) 0.30.1 4 1 Features #1 0.7 1.1 0.7 #3 0.65 0.7 1.5 0.6 1.1 #2 #1 #3 1.75 (0.3) CLOCKWISE mm (Tolerance in: 0.3 ) Applications 1. Camcorders 3. TFT-LCD TV sets 5. Cordless telephones 7. Optical cameras 2. Video disk players 4. Headphone stereos 6. Micro-motors Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVA3A101A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 100ohm 25% 250ppm/C PVA3A201A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 200ohm 25% 250ppm/C PVA3A301A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 300ohm 25% 250ppm/C PVA3A501A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 500ohm 25% 250ppm/C PVA3A102A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 1k ohm 25% 250ppm/C PVA3A202A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 2k ohm 25% 250ppm/C PVA3A302A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 3k ohm 25% 250ppm/C PVA3A502A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 5k ohm 25% 250ppm/C PVA3A103A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 10k ohm 25% 250ppm/C PVA3A203A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 20k ohm 25% 250ppm/C PVA3A303A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 30k ohm 25% 250ppm/C PVA3A503A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 50k ohm 25% 250ppm/C PVA3A104A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 100k ohm 25% 250ppm/C PVA3A204A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 200k ohm 25% 250ppm/C PVA3A304A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 300k ohm 25% 250ppm/C PVA3A504A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 500k ohm 25% 250ppm/C PVA3A105A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 1M ohm 25% 250ppm/C PVA3A205A01 0.1W(70C) Flow/Reflow/Soldering Iron 1(27010) 2M ohm 25% 250ppm/C Part Number Construction Standard Land Pattern 2.2 2.4 1.5 1.6 0.9 2 3.0 2.40.1 #2 2.2 Dia. 1.2 Dia. 3.0 Dia. 1.1 0.8 1.1 mm (Tolerancein: 0.1 ) Continued on the following page. 14 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Characteristics Humidity Exposure High Temperature Exposure Res. Change : 3% Res. Change : 3% Humidity Load Life Res. Change : 3% Load Life Res. Change : 3% Temperature Cycle Res. Change : 3% Temperature Coefficient of Resistance Rotational Life 2 250ppm/C Res. Change : 10% (10 cycles) 15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVZ3/PVS3/PVA3 Series Notice Notice (Operating and Storage Conditions) 2 1. Store in temperatures of -10 to +40 deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. If you use the trimmer potentiometer in an environment other than listed below, please consult with a Murata factory representative prior to using. The trimmer potentiometer should not be used under the following environmental conditions: (1) Corrosive gaseous atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Rating) 1. When using with partial load (rheostat), minimize the power depending on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P.R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. 4. If the trimmer potentiometer is used in DC and high humidity conditions, please connect wiper (#2) for plus and resistive element (#1 or #3) for minus. (PVZ3 Series only) Notice (Soldering and Mounting) 1. Soldering (1) Standard soldering condition (a) Reflow soldering : Refer to the standard temperature profile. (b) Soldering iron: *PVZ3A_A01 series >Temperature of tip 260 deg. C max. >Soldering time 3 sec. max. >Diameter 2mm max. >Wattage of iron 30W max. *PVZ3A_C01, PVZ3K_E01, PVZ3R_E01 series *PVS3, PVA3 series >Temperature of tip 360 deg. C max. >Soldering time 3 sec. max. >Diameter 2mm max. >Wattage of iron 30W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer potentiometer may deviate from the specified characteristics. (2) Flow soldering is available for PVA3 series. For PVZ3 and PVS3, do not use flow soldering method (dipping). If you use the flow soldering method, the trimmer potentiometer may not function. (3) The soldering iron should not come in contact with the case of the trimmer potentiometer. If such contact does occur, the trimmer potentiometer may be damaged. (4) Apply the appropriate amount of solder paste. The thickness of solder paste should be printed from 150 micro m to 200 micro m (PVZ3 series should be printed from 100 micro m to 150 micro m) and the dimension of land pattern used should be Murata's standard land pattern at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals. 2. Mounting (1) Use our standard land dimension. Excessive land area causes displacement due to the effect of the surface tension of the solder. Insufficient land area leads to insufficient soldering strength of the chip. (2) Do not apply excessive force (preferably 4.9N (Ref.; 500gf) max.), when the trimmer potentiometer is mounted to the PCB. (3) Do not warp and/or bend PC board to prevent Continued on the following page. 16 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVZ3/PVS3/PVA3 Series Notice Continued from the preceding page. trimmer potentiometer from breakage. (4) In chip placers, the recommended size of the cylindrical pick-up nozzle should be outer dimension 2.5-2.8mm dia. and inner dimension 2mm dia. 3. Cleaning (1) In case there is flux on the resistive element, clean sufficiently with cleaning solvents and completely remove all residual flux. (2) Isopropyl-alcohol and Ethyl-alcohol are applicable solvents for cleaning. If you use any other types of solvents, please evaluate performance by your product. 2 Flow Soldering Standard Profile PVA3 Series Only For flow soldering Pre-heating (in the air) Soldering 60-120 sec. 5 sec. max. Temperature (C) 250 Gradual Cooling (in the air) 200 100 0 Time Reflow Soldering Standard Profile PVA3/PVS3/PVZ3_A01 Series PVZ3_C01/E01 Series For reflow soldering For refllow soldering Pre-heating (in the air) Soldering Gradual Cooling (in the air) Soldering 60-120 sec. 30-40 sec. Gradual cooling (in the air) 260 220 230 200 Temperature (C) Temperature (C) Pre-heating (in the air) 100 180 150 100 0 60-120 sec. 30 sec. max. Time Time (Melting zone) Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. We recommend the screwdrivers below. * Recommended screwdriver for manual adjustment <PVZ3/PVA3 series> VESSEL MFG. : NO.9000+1.7x30 (Murata P/N : KMDR080) <PVZ3/PVA3/PVS3 series> TORAY MFG. : SA-2225 (Murata P/N : KMDR070) * Recommended screwdriver for automatic adjustment TORAY MFG. : JB-2225 (Murata P/N : KMBT070) 2. Don't apply more than 4.9N (Ref.; 500gf) of twist and stress after mounting onto PCB to prevent contact intermittence. If excessive force is applied, the trimmer potentiometer may not function. 3. For PVZ3 and PVA3 series, please use within the effective rotational angle. The potentiometer does not have a mechanical stop for over rotation. In cases out of effective rotational angle, the trimmer potentiometer may not function. 4. When using a lock paint to fix slot position, please consult with a Murata factory representative prior to using to prevent corrosion and contact intermittence. 17 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVZ3/PVS3/PVA3 Series Notice Notice (Other) 2 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata cannot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 18 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers 1.6dia. 2.00 0.30 1. Ultra-compact size of "2x2x2.3mm" 2. A sealed structure prevents liquids (water, cleaning liquid, sweat, etc.) from entering. 3. As for the resistance change characteristics, both a log curve type and linear type are available. 4. A rotation service life of 100 cycles is quaranteed. 5. Can be automatically mounted using a chip placer, as well as mounted using reflow soldering. 2.00 #2 2.300.15 0.50 0.30 0.50 0.700.15 Marking 2.15max. Features 0.700.15 SMD Sealed Type 2mm Size PVF2 Series #1 #3 0.30 0.50 0.300.15 3 #2 (Wiper contact) #1 #3 Clockwise mm (Tolerance :in0.10 ) CIRCUIT Applications 1. Hearing aids 2. Ultra-compact sensors or the like 3. Applications requiring ultra-compactness, and a sealed structure Part Number Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVF2A501A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 500ohm 30% 500ppm/C PVF2A102A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 1k ohm 30% 500ppm/C PVF2A202A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 2k ohm 30% 500ppm/C PVF2A502A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 5k ohm 30% 500ppm/C PVF2A103A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 10k ohm 30% 500ppm/C PVF2A203A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 20k ohm 30% 500ppm/C PVF2A503A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 50k ohm 30% 500ppm/C PVF2A104A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 100k ohm 30% 500ppm/C PVF2A204A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 200k ohm 30% 500ppm/C PVF2A504A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 500k ohm 30% 500ppm/C PVF2A105A11 0.001W(50C) Reflow/Soldering Iron 1(21010) 1M ohm 30% 500ppm/C PVF2A102A41 0.001W(50C) Reflow/Soldering Iron 1(21010) 1k ohm 30% 500ppm/C PVF2A202A41 0.001W(50C) Reflow/Soldering Iron 1(21010) 2k ohm 30% 500ppm/C PVF2A502A41 0.001W(50C) Reflow/Soldering Iron 1(21010) 5k ohm 30% 500ppm/C PVF2A103A41 0.001W(50C) Reflow/Soldering Iron 1(21010) 10k ohm 30% 500ppm/C PVF2A203A41 0.001W(50C) Reflow/Soldering Iron 1(21010) 20k ohm 30% 500ppm/C PVF2A503A41 0.001W(50C) Reflow/Soldering Iron 1(21010) 50k ohm 30% 500ppm/C PVF2A104A41 0.001W(50C) Reflow/Soldering Iron 1(21010) 100k ohm 30% 500ppm/C PVF2A204A41 0.001W(50C) Reflow/Soldering Iron 1(21010) 200k ohm 30% 500ppm/C PVF2A504A41 0.001W(50C) Reflow/Soldering Iron 1(21010) 500k ohm 30% 500ppm/C PVF2A102A51 0.001W(50C) Reflow/Soldering Iron 1(21010) 1k ohm 30% 500ppm/C PVF2A202A51 0.001W(50C) Reflow/Soldering Iron 1(21010) 2k ohm 30% 500ppm/C PVF2A502A51 0.001W(50C) Reflow/Soldering Iron 1(21010) 5k ohm 30% 500ppm/C PVF2A103A51 0.001W(50C) Reflow/Soldering Iron 1(21010) 10k ohm 30% 500ppm/C PVF2A203A51 0.001W(50C) Reflow/Soldering Iron 1(21010) 20k ohm 30% 500ppm/C PVF2A503A51 0.001W(50C) Reflow/Soldering Iron 1(21010) 50k ohm 30% 500ppm/C PVF2A104A51 0.001W(50C) Reflow/Soldering Iron 1(21010) 100k ohm 30% 500ppm/C PVF2A204A51 0.001W(50C) Reflow/Soldering Iron 1(21010) 200k ohm 30% 500ppm/C PVF2A504A51 0.001W(50C) Reflow/Soldering Iron 1(21010) 500k ohm 30% 500ppm/C PVF2A102A81 0.001W(50C) Reflow/Soldering Iron 1(21010) 1k ohm 30% 500ppm/C PVF2A202A81 0.001W(50C) Reflow/Soldering Iron 1(21010) 2k ohm 30% 500ppm/C PVF2A502A81 0.001W(50C) Reflow/Soldering Iron 1(21010) 5k ohm 30% 500ppm/C PVF2A103A81 0.001W(50C) Reflow/Soldering Iron 1(21010) 10k ohm 30% 500ppm/C PVF2A203A81 0.001W(50C) Reflow/Soldering Iron 1(21010) 20k ohm 30% 500ppm/C Continued on the following page. 19 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) PVF2A503A81 0.001W(50C) Reflow/Soldering Iron PVF2A104A81 0.001W(50C) Reflow/Soldering Iron PVF2A204A81 0.001W(50C) PVF2A504A81 Total Resistance Value TCR 1(21010) 50k ohm 30% 500ppm/C 1(21010) 100k ohm 30% 500ppm/C Reflow/Soldering Iron 1(21010) 200k ohm 30% 500ppm/C 0.001W(50C) Reflow/Soldering Iron 1(21010) 500k ohm 30% 500ppm/C PVF2A102A91 0.001W(50C) Reflow/Soldering Iron 1(21010) 1k ohm 30% 500ppm/C PVF2A202A91 0.001W(50C) Reflow/Soldering Iron 1(21010) 2k ohm 30% 500ppm/C PVF2A502A91 0.001W(50C) Reflow/Soldering Iron 1(21010) 5k ohm 30% 500ppm/C PVF2A103A91 0.001W(50C) Reflow/Soldering Iron 1(21010) 10k ohm 30% 500ppm/C PVF2A203A91 0.001W(50C) Reflow/Soldering Iron 1(21010) 20k ohm 30% 500ppm/C PVF2A503A91 0.001W(50C) Reflow/Soldering Iron 1(21010) 50k ohm 30% 500ppm/C PVF2A104A91 0.001W(50C) Reflow/Soldering Iron 1(21010) 100k ohm 30% 500ppm/C PVF2A204A91 0.001W(50C) Reflow/Soldering Iron 1(21010) 200k ohm 30% 500ppm/C PVF2A504A91 0.001W(50C) Reflow/Soldering Iron 1(21010) 500k ohm 30% 500ppm/C The last three digits express the individual specification codes for Resistant Curve. Please refer to Resistance Curve on the following page for characteristics. Construction Standard Land Pattern Shaft 0.90 0.60 0.90 2.20 O-ring Rotor Case 0.60 0.60 0.40 Wiper Terminal Substrate mm (Tolerance :in0.10 ) Resistive Element Characteristics Temperature Cycle TR 5% Humidity TR 15, -2% Vibration V.S.S. 5% Shock (100G) V.S.S. 5% Temperature Load Life TR +2, -10% Low Temperature Exposure TR 3% Rotational Life (100 cycles) TR 10% TR: Total Resistance Change V.S.S. : Voltage Setting Stability Resistance Curve Linear-log. curve (Measured from terminal 1 to 2) 100 90 90 80 A11 A11 Percent resistance 70 A81 60 A41 50 40 30 70 50 40 A51 30 20 10 10 0 #1 A91 60 20 0 20 Linear-log. log. curve (Measured from terminal 2 to 3) 100 80 Percent resistance 3 Part Number 0 20 40 60 Percent clockwise rotation 80 100 #3 0 #1 20 40 60 Percent clockwise rotation 80 100 #3 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVF2 Series Notice Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40 deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. If you use the trimmer potentiometer in an environment other than listed below, please consult with a Murata factory representative prior to using. The trimmer potentiometer should not be used under the following environmental conditions: (1) Corrosive gaseous atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above 3 Notice (Rating) 1. When using with partial load (rheostat), minimize the power depending on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P.R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. 4. If the trimmer potentiometer is used in DC and high humidity conditions, please connect wiper (#2) for plus and resistive element (#1 or #3) for minus. Notice (Soldering and Mounting) 1. Soldering (1) Standard solder iron condition (a) Reflow soldering: Refer to the standard temperature profile. (b) Sodering iron: >Temperature of tip 260 deg. C max. >Soldering time 3 sec. max. >Diameter 1mm dia. max. >Wattage of iron 30W max. Before using other soldering conditions than those listed above, please consult with a Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer potentiometer may deviate from the specified characteristics. (2) Use our standard land dimension. Excessive land area causes displacement due to the effect of the surface tension of the solder. Insufficient land area leads to insufficient soldering strength of the chip. (3) The soldering iron should not come in contact with the case of the trimmer potentiometer. If such contact does occur, the trimmer potentiometer may be damaged. (4) Cannot be soldered using the flow soldering method. If you use the flow soldering method, the trimmer potentiometer may not function. 2. Mounting (1) Use our standard land dimension. Excessive land area causes displacement due to the effect of the surface tension of the solder. Insufficient land area leads to insufficient soldering strength of the chip. (2) Do not apply excessive force (preferably 4.9N (Ref.; 500gf) max.), when the trimmer potentiometer is mounted to the PCB. (3) Do not warp and/or bend PC board to prevent trimmer potentiometer from breakage. 3. Cleaning (1) Isopropyl-alcohol and Ethyl-alcohol are applicable solvents for cleaning. If you use any other types of solvents, please consult with a Murata factory representative prior to using. (2) The total cleaning time by cold dipping, vapor and ultrasonic washing (conditions as below) method should be less than 3 minutes. (3) For ultra-sonic cleaning, the available condition is as follows. >Power: 600W (67 liter) max. >Frequency: 28kHz >Temperature: Ambient temperature Due to the ultra-sonic cleaning equipment's peculiar self-resonance point and that the Continued on the following page. 21 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVF2 Series Notice Continued from the preceding page. cleaning compatibility usually depends on the jig construction and/or the cleaning condition such as the depth of immersion, please check the cleaning equipment to determine the suitable Reflow Soldering Standard Profile For reflow soldering Pre-heating (in the air) Soldering Gradual Cooling (in the air) 230 Temperature (C) 3 200 100 0 60-120 sec. 30 sec. max. Time (Melting zone) Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. 2. Don't apply more than 4.9N (Ref.; 500gf) of twist and stress after mounting onto PCB to prevent contact intermittence. If excessive force is applied, the trimmer potentiometer may not function. 3. The rotational torque at the position of the adjustment range should not exceed the stop strength. 4. When using a lock paint to fix slot position, please use adhesive resin without chlorine or sulfur (Three-bond "1401 series"). Notice (Other) 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata cannot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 22 conditions. If the trimmer potentiometer is cleaned by other conditions, the trimmer potentiometer may be damaged. R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers SMD Sealed Type 3mm Size PVG3 Series 3.6 Features #3 3.4 2.2 Dia. 1. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 2. Driver plate with cross-slot is suitable for automatic adjustment. 3. Rotor with large diameter and deep groove improves driver insertion. 4. J-hook, Gull wing terminal shape. Rear and through hole terminal shape. 5. 3mm and 4mm land pattern can be used without change. (Gull wing is suitable for 4mm size land pattern.) 6. Heat resistance performance enables high temperature peak re-flow soldering. 7. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 2.0 0.45 0.4 Depth #2 0.1 Min. #1 0.6 2.3 2.7 3.6 1.000.15 #2 #1 CLOCKWISE PVG3A #3 0.750.15 mm (Tolerancein: 0.3 ) 3.6 3.4 2.2 Dia. 0.1 Min. #1 2.3 1.000.15 4.5 1. Small sensors 2. Optical Transceiver Module 3. Copier 4. Printer 5. Compact Power Supply 6. Wireless Radio module 2.7 #3 Applications 4 2.0 0.45 0.4 Depth #2 #2 #1 CLOCKWISE PVG3G #3 0.750.15 mm (Tolerance in: 0.3 ) 3.6 (2.5) 1.1 2.0 0.5 2.3 #1 0.5 0.55 Depth 0.5 3.4 2.2Dia. 2.8 5.6 2.8 #3 0.80.2 0.1 min. 0.1 min. #2 0.5 #2 #1 PVG3K #3 CLOCKWISE mm (Tolerance in: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVG3p100C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 10ohm 20% 150ppm/C PVG3p200C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 20ohm 20% 150ppm/C PVG3p500C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 50ohm 20% 150ppm/C PVG3p101C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 100ohm 20% 150ppm/C PVG3p201C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 200ohm 20% 150ppm/C PVG3p501C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 500ohm 20% 150ppm/C PVG3p102C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 1k ohm 20% 150ppm/C PVG3p202C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 2k ohm 20% 150ppm/C PVG3p502C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 5k ohm 20% 150ppm/C PVG3p103C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 10k ohm 20% 150ppm/C PVG3p203C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 20k ohm 20% 150ppm/C PVG3p503C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 50k ohm 20% 150ppm/C Part Number Continued on the following page. 23 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVG3p104C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 100k ohm 20% 150ppm/C PVG3p204C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 200k ohm 20% 150ppm/C PVG3p504C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 500k ohm 20% 150ppm/C PVG3p105C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 1M ohm 20% 150ppm/C PVG3p205C01 0.25W(70C) Reflow/Soldering Iron 1(21010) 2M ohm 20% 150ppm/C Part Number The blank column is filled with the code of adjustment direction and lead type A (top, J-hook), G (top, gull-wing), or K (rear). Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PVG3p100A01 0.25(70C) Reflow/Soldering Iron 1(21010) 10 ohm20% 250 PVG3p200A01 0.25(70C) Reflow/Soldering Iron 1(21010) 20 ohm20% 250 PVG3p500A01 0.25(70C) Reflow/Soldering Iron 1(21010) 50 ohm20% 250 PVG3p101A01 0.25(70C) Reflow/Soldering Iron 1(21010) 100 ohm20% 250 PVG3p201A01 0.25(70C) Reflow/Soldering Iron 1(21010) 200 ohm20% 100 PVG3p501A01 0.25(70C) Reflow/Soldering Iron 1(21010) 500 ohm20% 100 PVG3p102A01 0.25(70C) Reflow/Soldering Iron 1(21010) 1k ohm20% 100 PVG3p202A01 0.25(70C) Reflow/Soldering Iron 1(21010) 2k ohm20% 100 Non Standard PVG3p502A01 0.25(70C) Reflow/Soldering Iron 1(21010) 5k ohm20% 100 Product PVG3p103A01 0.25(70C) Reflow/Soldering Iron 1(21010) 10k ohm20% 100 (Cd included) PVG3p203A01 0.25(70C) Reflow/Soldering Iron 1(21010) 20k ohm20% 100 PVG3p503A01 0.25(70C) Reflow/Soldering Iron 1(21010) 50k ohm20% 100 PVG3p104A01 0.25(70C) Reflow/Soldering Iron 1(21010) 100k ohm20% 100 PVG3p204A01 0.25(70C) Reflow/Soldering Iron 1(21010) 200k ohm20% 100 PVG3p504A01 0.25(70C) Reflow/Soldering Iron 1(21010) 500k ohm20% 100 PVG3p105A01 0.25(70C) Reflow/Soldering Iron 1(21010) 1M ohm20% 100 PVG3p205A01 0.25(70C) Reflow/Soldering Iron 1(21010) 2M ohm20% 100 Part Number Construction PVG3A/PVG3G PVG3K Rotor Cover Rotor 2 #2-Terminal Cover #2-Terminal 2 Case M Case M #3-Terminal #3-Terminal Resistive Element Wiper Resistive Element Wiper Ceramic Substrate Ceramic Substrate #1-Terminal O-Ring #1-Terminal O-Ring Standard Land Pattern PVG3A PVG3G 1.2 1.1 mm (Tolerancein: 0.1 ) 1.1 1.2 1.1 1.3 1.1 .2.5 2.1 .2.5 2.1 0.9 1.3 1.4 1.4 0.9 4 Remarks mm (Tolerancein: 0.1 ) Continued on the following page. 24 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Standard Land Pattern PVG3K 3.1 1.0 1.5 1.0 3.1 3.2 dia. 1.2 1.1 1.2 mm (Tolerance in: 0.1 ) Characteristics Temperature Cycle TR TR Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (50cycles) 2% V.S.S 1% 2% V.S.S 1% IR 10Mohm min. TR 1% 4 V.S.S 1% TR 1% V.S.S 1% TR 3% or 3ohm max., whichever is greater V.S.S 1% TR 2% V.S.S 2% TR 3% V.S.S 2% TR RV100ohm ... 3% or 2ohm max., whichever is greater RG100kohm ... +0/-10% TR V.S.S IR R : Total Resistance Change : Voltage Setting Stability : Insulation ResistanceR : Standard Total Resistance 25 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVG3 Series Notice Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40 deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. If you use the trimmer potentiometer in an environment other than listed below, please consult with a Murata factory representative prior to using. The trimmer potentiometer should not be used under the following environmental conditions: (1) Corrosive gaseous atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Rating) 4 1. When using with partial load (rheostat), minimize the power depending on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P.R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. Notice (Soldering and Mounting) 1. Soldering (1) Standard soldering condition (a) Reflow soldering : Refer to the standard temperature profile. (b) Soldering iron Temperature of tip : 400 deg. C max. Soldering time : 3 sec. max. Diameter of tip : 2mm dia. max. Wattage of iron : 30W max. Before using other soldering conditions more than those listed above, please consult with a Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer potentiometer may deviate from the specified characteristics. (2) Cannot be soldered using the flow soldering method. If you use the flow soldering method, the trimmer potentiometer may not function. (3) The soldering iron should not come in contact with the case of the trimmer potentiometer. If such contact does occur, the trimmer potentiometer may be damaged. (4) Apply the appropriate amount of solder paste. If the amount of solder paste applied to the land is insufficient, the required adhesive strength cannot be obtained. If an excessive amount of solder paste is applied, solder bridging or flux overflow to the resistive element surface can occur. 2. Mounting (1) Use our standard land dimension. Excessive land area causes displacement due to the effect of the surface tension of the solder. Insufficient land area leads to insufficient soldering strength of the chip. (2) Do not apply excessive force (preferably 4.9N (Ref.; 500gf) max.), when the trimmer potentiometer is mounted to the PCB. (3) Do not warp and/or bend PC board to prevent trimmer potentiometer from breakage. (4) In chip placers, the size of the cylindrical pick-up nozzle should be outer dimension 2.5-3.0mm dia. and inner dimension 2.0-2.5mm dia.. 3. Cleaning (1) Isopropyl-alcohol and Ethyl-alcohol are applicable solvents for cleaning. If you use any other types of solvents, please consult with a Murata factory representative prior to using. (2) Less than 3 minutes of total cleaning time by dipping, vapor and ultra-sonic method. (3) In case of ultra-sonic cleaning method, cleaning conditions should be as follows. (a) Power: 600W (67lit.) max. (b) Frequency: 28kHz (c) Temperature: Ambient temperature Due to ultra-sonic cleaning equipment's peculiar self-resonance point and that cleaning compatibility usually depends on the jig Continued on the following page. 26 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVG3 Series Notice Continued from the preceding page. construction and/or the cleaning condition such as the depth of immersion, please check the cleaning equipment to determine the suitable conditions. If the condition is not suitable, the trimmer potentiometer may deviate from specified characteristics. Reflow Soldering Standard Profile Pre-heating in air Soldering Gradual cooling in air 260 Temperature (C) 230 200 150 100 0 60-120 sec. 40 sec. max. Time (Melting zone) 4 Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. * Recommended screwdriver for manual adjustment TORAY INDUSTRIES, INC. : SA-2225 (Murata P/N : KMDR070) * Recommended screwdriver bit for automatic adjustment TORAY INDUSTRIES, INC. : JB-2225 (Mutata P/N : KMBT070) We can supply the screwdrivers above. If you place order, please specify the Murata P/N. 2. Don't apply more than 9.8N (Ref.; 1kgf) of twist and stress after mounting onto PCB to prevent contact intermittence. 3. When adjusting with an adjustment tool, the applied force to the adjustment screw should not exceed 4.9N (Ref.; 500gf). If excessive force is applied, the trimmer potentiometer may not function due to damage. 4. When using a lock paint to fix slot position, please use adhesive resin without chlorine or sulfur (Three-bond "1401 series"). Notice (Other) 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata cannot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 27 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers SMD Sealed Type 4mm Size PVM4 Series 4.0 1.5 Dia. 3.8 Dia. #2 Features 0.7 (2.4) 4.7 2.70.1 1. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 2. Available for flow and reflow soldering method while maintaining unique sealed construction. 3. Simple construction by 3-piece parts achieves high reliability. 4. Large diameter slot of rotor improves driver insertion. 5. Available for cleaning after soldering 6. High grade version is available (PVM4AxxxD01). 7. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 2.00.2 #1 #3 0.550.1 0.350.1 Depth 0.75 (0.3) 2.4 1.5 0.8 1.7 0.6 0.85 1.8 0.85 #2 #1 CLOCKWISE #3 mm (Tolerance in: 0.3 ) Applications 5 1. Security 2. OA, FA equipments 3. Measuring equipments 4. Professional cameras 5. Encorders 6. Sensors Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVM4A101C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 100ohm 25% 250ppm/C PVM4A201C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 200ohm 25% 250ppm/C PVM4A301C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 300ohm 25% 250ppm/C PVM4A501C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 500ohm 25% 250ppm/C PVM4A102C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 1k ohm 25% 250ppm/C PVM4A202C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 2k ohm 25% 250ppm/C PVM4A302C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 3k ohm 25% 250ppm/C PVM4A502C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 5k ohm 25% 250ppm/C PVM4A103C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 10k ohm 25% 250ppm/C PVM4A203C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 20k ohm 25% 250ppm/C PVM4A303C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 30k ohm 25% 250ppm/C PVM4A503C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 50k ohm 25% 250ppm/C PVM4A104C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 100k ohm 25% 250ppm/C PVM4A204C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 200k ohm 25% 250ppm/C PVM4A304C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 300k ohm 25% 250ppm/C PVM4A504C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 500k ohm 25% 250ppm/C PVM4A105C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 1M ohm 25% 250ppm/C PVM4A205C01 0.1W(70C) Flow/Reflow/Soldering Iron 1(24010) 2M ohm 25% 250ppm/C PVM4A101D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 100ohm 20% 100ppm/C PVM4A201D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 200ohm 20% 100ppm/C PVM4A301D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 300ohm 20% 100ppm/C PVM4A501D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 500ohm 20% 100ppm/C PVM4A102D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 1k ohm 20% 200ppm/C PVM4A202D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 2k ohm 20% 200ppm/C PVM4A302D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 3k ohm 20% 200ppm/C PVM4A502D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 5k ohm 20% 200ppm/C PVM4A103D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 10k ohm 20% 150ppm/C PVM4A203D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 20k ohm 20% 150ppm/C PVM4A303D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 30k ohm 20% 150ppm/C PVM4A503D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 50k ohm 20% 150ppm/C Part Number Continued on the following page. 28 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVM4A104D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 100k ohm 20% 150ppm/C PVM4A204D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 200k ohm 20% 150ppm/C PVM4A304D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 300k ohm 20% 150ppm/C PVM4A504D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 500k ohm 20% 150ppm/C PVM4A105D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 1M ohm 20% 150ppm/C PVM4A205D01 0.25W(70C) Flow/Reflow/Soldering Iron 1(24010) 2M ohm 20% 150ppm/C Part Number The last three digits express the individual specification codes. C01 for standard type and D01 for high-liability type. Part Number Power Rating (W) Soldering Method Number of Turns Total Resistance Value (Effective Rotation Angle) TCR (ppm/C) PVM4A101A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 100 ohm25% 250 PVM4A201A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 200 ohm25% 250 PVM4A301A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 300 ohm25% 250 PVM4A501A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 500 ohm25% 250 PVM4A102A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 1k ohm25% 250 PVM4A202A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 2k ohm25% 250 PVM4A302A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 3k ohm25% 250 PVM4A502A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 5k ohm25% 250 PVM4A103A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 10k ohm25% 250 PVM4A203A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 20k ohm25% 250 PVM4A303A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 30k ohm25% 250 PVM4A503A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 50k ohm25% 250 PVM4A104A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 100k ohm25% 250 PVM4A204A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 200k ohm25% 250 PVM4A304A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 300k ohm25% 250 PVM4A504A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 500k ohm25% 250 PVM4A105A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 1M ohm25% 250 PVM4A205A01 0.1(70C) Flow/Reflow/Soldering Iron 1(24010) 2M ohm25% 250 PVM4A101B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 100 ohm20% 150 PVM4A201B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 200 ohm20% 100 PVM4A301B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 300 ohm20% 100 PVM4A501B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 500 ohm20% 100 PVM4A102B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 1k ohm20% 100 PVM4A202B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 2k ohm20% 100 PVM4A302B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 3k ohm20% 100 PVM4A502B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 5k ohm20% 100 PVM4A103B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 10k ohm20% 100 PVM4A203B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 20k ohm20% 100 PVM4A303B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 30k ohm20% 100 PVM4A503B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 50k ohm20% 100 PVM4A104B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 100k ohm20% 150 PVM4A204B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 200k ohm20% 150 PVM4A304B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 300k ohm20% 150 PVM4A504B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 500k ohm20% 150 PVM4A105B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 1M ohm20% 150 PVM4A205B01 0.25(70C) Flow/Reflow/Soldering Iron 1(24010) 2M ohm20% Remarks Non Standard Product (Cd Free) Non Standard Product (Cd included) 5 Non Standard Product (Cd Free) Non Standard Product (Cd included) 150 Continued on the following page. 29 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Construction Standard Land Pattern 1.7 Rotor 3.2 1.8 #2 Terminal Wiper Rubber 1.2 3.2 Ceramic Substrate #1 Terminal Resistive Element 1.1 #3 Terminal 1.6 Characteristics Item Humidity Exposure PVM4ApppC01 PVM4ApppD01 Res. Change : 3% Res. Change : 2% High Temperature Exposure Res. Change : 3% Res. Change : 2% Humidity Load Life Res. Change : 3% Res. Change : 3% Temperature Load Life Res. Change : 3% Res. Change : 3% Temperature Cycle Rotational Life 5 30 Res. Change : 3% Res. Change : 2% Res. Change : 10% (20 cycles) Res. Change : 5% (100 cycles) 1.1 mm (Tolerancein: 0.1 ) catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVM4 Series Notice Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40 deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. If you use the trimmer potentiometer in an environment other than listed below, please consult with a Murata factory representative prior to using. The trimmer potentiometer should not be used under the following environmental conditions: (1) Corrosive gaseous atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Rating) 1. When using with partial load (rheostat), minimize the power depending on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P.R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. 5 Notice (Soldering and Mounting) 1. Soldering (1) Can be soldered by reflow soldering method, flow soldering method, and soldering iron. (In case of flow soldering, it is necessary to clean after soldering.) (2) Use our standard land dimension. Excessive land area causes displacement due to the effect of the surface tension of the solder. Insufficient land area leads to insufficient soldering strength of the chip. (3) Standard soldering condition (a) Reflow and flow soldering : Refer to the standard temperature profile. (b) Soldering iron: >Temperature of tip 400 deg.C max. >Soldering time 5 sec. max. >Diameter 2mm dia. max. >Wattage of iron 40W max. Before using other soldering conditions than those listed above, please consult with a Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer potentiometer may deviate from the specified characteristics. (4) Apply the appropriate amount of solder paste. The thickness of solder paste should be printed from 100 micro m to 150 micro m and the dimension of land pattern used should be Murata's standard land pattern at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals. (5) The soldering iron should not come in contact with the case of the trimmer potentiometer. If such contact does occur, the trimmer potentiometer may be damaged. 2. Mounting (1) Do not apply excessive force (preferably 9.8N (Ref.; 1kgf) max.), when the trimmer potentiometer is mounted to the PCB. (2) Do not warp and/or bend PC board to prevent trimmer potentiometer from breakage. (3) In chip placers, the recommended size of the cylindrical pick-up nozzle should be outer dimension 4.0mm dia. and inner dimension 2.0mm dia. 3. Cleaning (1) Isopropyl alcohol and Ethyl alcohol are available materials for cleaning. For other materials, please consult with a Murata factory representative prior to using. (2) The following are the recommended cleaning conditions for the potentiometer. If this part is cleanied under any other conditions than these listed below, the sealing construction may be damaged. (Condition) Type1: Cold dipping/Max. 5 min. Continued on the following page. 31 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVM4 Series Notice Continued from the preceding page. Type2: Hot dipping/Max. 2 min. Type3: Ultra-sonic washing/Max. 1 min. (20W/litre or below) Type4: Hot dipping/Max. 1 min.+ Ultra-sonic washing/Max.1 min. (20W/litre or below) Type5: Hot dipping/Max. 1 min.+ Ultra-sonic washing/Max. 30 sec.+ (20W/litre or below)/(Preferably max. 30 sec.) Vapor/Max.30 sec. Flow Soldering Standard Profile Soldering Reflow Soldering Standard Profile Gradual Cooling (in the air) Pre-heating(in the air) 260 260 200 200 180 Temperature (C) Temperature (C) Pre-heating(in the air) Due to ultra-sonic cleaning equipment's peculiar self-resonance point and that cleaning compatibility usually depends on the jig construction and/or the cleaning condition such as the depth of immersion, please check the cleaning equipment to determine the suitable conditions. If the condition is not suitable, the trimmer potentiometer may deviate from specified characteristics. 150 100 Gradual Cooling (in the air) 150 100 0 0 60 to 120 sec. 5 Soldering 10 sec. max. Time (Melting zone) 60 to 120 sec. 30 to 50 sec. 150 to 180C (Melting zone) Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. We recommend the screwdriver below. * Recommended screwdriver for manual adjustment VESSEL MFG.: NO. 9000-2.6x30 (Murata P/N : KMDR120) We can supply the screwdrivers above. If you place order, please specify the Murata P/N. 2. Don't apply more than 4.9N (Ref.; 500gf) of twist and stress after mounting onto PCB to prevent contact intermittence. If excessive force is Notice (Other) 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata cannot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 32 applied, the trimmer potentiometer may not function. 3. Please use within the effective rotational angle. The potentiometer does not have a mechanical stop for over rotation. In cases out of effective rotational angle, the trimmer potentiometer may not function. 4. When using a lock paint to fix slot position, please use adhesive resin without chlorine or sulfur (Three-bond "1401 series"). Time R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers SMD Sealed Type Multi-turns PVG5/PV01 Series 4.8 PVG5 Series Features ADJ. Slot DIA 1.5 Width 0.6 Depth 0.5 5.0 3-0.9 #2 0.5 3.9 2.6 3-0.7 3-0.8 2.4 1.2 3.5 1. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 2. Available with reflow soldering method 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 5. Both Top and side adjustment directions 6. Ultra smaller volume (1/5-1/2) than leaded multi-turn potentiometer. 7. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. #3 0.2 #1 2.5 Schematic #2 PVG5A #1 #3 CLOCKWISE 2.4 4.9 3-0.8 2.6 0.5 1.2 3.7 ADJ.Slot DIA 1.5 Width 0.6 Depth 0.5 1. Measuring instruments 2. OA equipment 3. Madical equipment 4. Power supply 5. Sensors 6. Base station for cellular phone 4.8 Applications mm (Tolerance in: 0.3 ) 3-0.7 3-0.9 #3 Schematic 2.3 #2 #2 PVG5H #1 #1 #3 CLOCKWISE mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVG5p100C01 0.25W(70C) Reflow/Soldering Iron 11 10ohm 10% 150ppm/C PVG5p200C01 0.25W(70C) Reflow/Soldering Iron 11 20ohm 10% 150ppm/C PVG5p500C01 0.25W(70C) Reflow/Soldering Iron 11 50ohm 10% 150ppm/C PVG5p101C01 0.25W(70C) Reflow/Soldering Iron 11 100ohm 10% 150ppm/C PVG5p201C01 0.25W(70C) Reflow/Soldering Iron 11 200ohm 10% 150ppm/C PVG5p501C01 0.25W(70C) Reflow/Soldering Iron 11 500ohm 10% 150ppm/C PVG5p102C01 0.25W(70C) Reflow/Soldering Iron 11 1k ohm 10% 150ppm/C PVG5p202C01 0.25W(70C) Reflow/Soldering Iron 11 2k ohm 10% 150ppm/C PVG5p502C01 0.25W(70C) Reflow/Soldering Iron 11 5k ohm 10% 150ppm/C PVG5p103C01 0.25W(70C) Reflow/Soldering Iron 11 10k ohm 10% 150ppm/C PVG5p203C01 0.25W(70C) Reflow/Soldering Iron 11 20k ohm 10% 150ppm/C PVG5p503C01 0.25W(70C) Reflow/Soldering Iron 11 50k ohm 10% 150ppm/C PVG5p104C01 0.25W(70C) Reflow/Soldering Iron 11 100k ohm 10% 150ppm/C PVG5p204C01 0.25W(70C) Reflow/Soldering Iron 11 200k ohm 10% 150ppm/C PVG5p504C01 0.25W(70C) Reflow/Soldering Iron 11 500k ohm 10% 150ppm/C PVG5p105C01 0.25W(70C) Reflow/Soldering Iron 11 1M ohm 10% 150ppm/C PVG5p205C01 0.25W(70C) Reflow/Soldering Iron 11 2M ohm 10% 150ppm/C Part Number The blank column is filled with the code of adjustment direction A (top) or H (side). 33 6 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PVG5p100A01 0.25(70C) Reflow/Soldering Iron 11 10 ohm10% 200 PVG5p200A01 0.25(70C) Reflow/Soldering Iron 11 20 ohm10% 200 PVG5p500A01 0.25(70C) Reflow/Soldering Iron 11 50 ohm10% 200 PVG5p101A01 0.25(70C) Reflow/Soldering Iron 11 100 ohm10% 200 PVG5p201A01 0.25(70C) Reflow/Soldering Iron 11 200 ohm10% 100 PVG5p501A01 0.25(70C) Reflow/Soldering Iron 11 500 ohm10% 100 PVG5p102A01 0.25(70C) Reflow/Soldering Iron 11 1k ohm10% 100 PVG5p202A01 0.25(70C) Reflow/Soldering Iron 11 2k ohm10% 100 Non Standard PVG5p502A01 0.25(70C) Reflow/Soldering Iron 11 5k ohm10% 100 Product PVG5p103A01 0.25(70C) Reflow/Soldering Iron 11 10k ohm10% 100 (Cd included) PVG5p203A01 0.25(70C) Reflow/Soldering Iron 11 20k ohm10% 100 PVG5p503A01 0.25(70C) Reflow/Soldering Iron 11 50k ohm10% 100 PVG5p104A01 0.25(70C) Reflow/Soldering Iron 11 100k ohm10% 100 PVG5p204A01 0.25(70C) Reflow/Soldering Iron 11 200k ohm10% 100 PVG5p504A01 0.25(70C) Reflow/Soldering Iron 11 500k ohm10% 100 PVG5p105A01 0.25(70C) Reflow/Soldering Iron 11 1M ohm10% 100 PVG5p205A01 0.25(70C) Reflow/Soldering Iron 11 2M ohm10% 100 Part Number Remarks Construction Adjustment Screw Gear Case #2 Terminal Wiper 6 Resistive Element #1, #3 Terminal Ceramic Substrate Standard Land Pattern PVG5A PVG5H 1.6 2.25 1.2 2.8 1.6 2.25 1.6 1.6 1.3 2.8 1.3 1.3 1.3 1.3 mm (Tolerance in: 0.1 ) 1.0 1.3 mm (Tolerancein: 0.1 ) Continued on the following page. 34 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Characteristics Temperature Cycle Humidity Vibration Shock TR 2% V.S.S. 1% TR 2% IR 10Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 3% or 3ohm max., Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (100 cycles) whichever is greater V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR 3% or 3ohm max., whichever is greater TR : Total Resistance Change V.S.S. : Voltage Setting Stability IR : Insulation Resistance 6 35 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV01 Series 6.4 1.2 1.1 Features 1.80.2 DIA 3-1.0 4.0 1. Small size (6.35x6.35x4.3mm) 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available with reflow soldering method 4. Available for ultrasonic cleaning after soldering 5. Clutch mechanism prevents excessive wiper rotation. 6. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 0.60.2 6.7 0.6 1.0 #2 3-0.40.1 Dia. #1 #3 2.5 2.5 #2 PV01P #1 #3 mm (Tolerancein: 0.3 ) Clockwise Applications 6.4 2. FAX 4. Printers 1.1 1.2 #2 4.0 1. Measuring instruments 3. PPCs 5. Sensors 3-0.40.1 Dia. #1 #3 2.5 2.5 1.80.2 Dia. 3-1.0 #2 PV01W 0.6 6.7 1.0 0.60.2 #1 #3 mm (Tolerancein: 0.3 ) Clockwise 6.4 4.0 #2 1.1 1.1 2.5 1.80.2 Dia. 2.5 6.7 6 #3 0.60.2 3-0.40.1 Dia. #1 0.6 1.0 3-1.0 #2 PV01X #1 #3 Clockwise mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV01p100C01 0.25W(85C) Reflow/Soldering Iron 12 10ohm 10% 150ppm/C PV01p200C01 0.25W(85C) Reflow/Soldering Iron 12 20ohm 10% 150ppm/C PV01p500C01 0.25W(85C) Reflow/Soldering Iron 12 50ohm 10% 150ppm/C PV01p101C01 0.25W(85C) Reflow/Soldering Iron 12 100ohm 10% 150ppm/C PV01p201C01 0.25W(85C) Reflow/Soldering Iron 12 200ohm 10% 150ppm/C PV01p501C01 0.25W(85C) Reflow/Soldering Iron 12 500ohm 10% 150ppm/C PV01p102C01 0.25W(85C) Reflow/Soldering Iron 12 1k ohm 10% 150ppm/C PV01p202C01 0.25W(85C) Reflow/Soldering Iron 12 2k ohm 10% 150ppm/C PV01p502C01 0.25W(85C) Reflow/Soldering Iron 12 5k ohm 10% 150ppm/C PV01p103C01 0.25W(85C) Reflow/Soldering Iron 12 10k ohm 10% 150ppm/C PV01p203C01 0.25W(85C) Reflow/Soldering Iron 12 20k ohm 10% 150ppm/C PV01p253C01 0.25W(85C) Reflow/Soldering Iron 12 25k ohm 10% 150ppm/C PV01p503C01 0.25W(85C) Reflow/Soldering Iron 12 50k ohm 10% 150ppm/C PV01p104C01 0.25W(85C) Reflow/Soldering Iron 12 100k ohm 10% 150ppm/C PV01p204C01 0.25W(85C) Reflow/Soldering Iron 12 200k ohm 10% 150ppm/C PV01p254C01 0.25W(85C) Reflow/Soldering Iron 12 250k ohm 10% 150ppm/C Part Number Continued on the following page. 36 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV01p504C01 0.25W(85C) Reflow/Soldering Iron 12 500k ohm 10% 150ppm/C PV01p105C01 0.25W(85C) Reflow/Soldering Iron 12 1M ohm 10% 150ppm/C Part Number The blank column is filled with the code of adjustment direction P (side), W (top) or X (side). Magazine packaging is standard for PV01 series. Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV01p100A01 0.25(85C) Refrow/Soldering Iron 12 10 ohm10% 100 PV01p200A01 0.25(85C) Refrow/Soldering Iron 12 20 ohm10% 100 PV01p500A01 0.25(85C) Refrow/Soldering Iron 12 50 ohm10% 100 PV01p101A01 0.25(85C) Refrow/Soldering Iron 12 100 ohm10% 100 PV01p201A01 0.25(85C) Refrow/Soldering Iron 12 200 ohm10% 100 PV01p501A01 0.25(85C) Refrow/Soldering Iron 12 500 ohm10% 100 PV01p102A01 0.25(85C) Refrow/Soldering Iron 12 1k ohm10% 100 PV01p202A01 0.25(85C) Refrow/Soldering Iron 12 2k ohm10% 100 PV01p502A01 0.25(85C) Refrow/Soldering Iron 12 5k ohm10% 100 PV01p103A01 0.25(85C) Refrow/Soldering Iron 12 10k ohm10% 100 PV01p203A01 0.25(85C) Refrow/Soldering Iron 12 20k ohm10% 100 PV01p253A01 0.25(85C) Refrow/Soldering Iron 12 25k ohm10% 100 PV01p503A01 0.25(85C) Refrow/Soldering Iron 12 50k ohm10% 100 PV01p104A01 0.25(85C) Refrow/Soldering Iron 12 100k ohm10% 100 PV01p204A01 0.25(85C) Refrow/Soldering Iron 12 200k ohm10% 100 PV01p254A01 0.25(85C) Refrow/Soldering Iron 12 250k ohm10% 100 PV01p504A01 0.25(85C) Refrow/Soldering Iron 12 500k ohm10% 100 PV01p105A01 0.25(85C) Refrow/Soldering Iron 12 1M ohm10% 100 Part Number Remarks Non Standard Product (Cd included) Construction Gear Case 6 Terminal Adjustment Screw Wiper Cermet Resistive Element Alumina Substrate Standard Land Pattern PV01P PV01W/PV01X 1.6 1.6 3.4 1.6 3.8 3.8 1.8 4.85 1.8 4.85 1.8 1.8 1.6 mm (Tolerancein: 0.1 ) 1.6 3.4 1.6 mm (Tolerancein: 0.1 ) Continued on the following page. 37 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 1% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR RV100ohm ... 3% RG100ohm ... 2% TR V.S.S. IR R 6 38 : Total Resistance Change : Voltage Setting Stability : Insulation Resistance : Standard Total Resistance catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVG5/PV01 Series Notice Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40 deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. If you use the trimmer potentiometer in an environment other than listed below, please consult with a Murata factory representative prior to using. The trimmer potentiometer should not be used under the following environmental conditions: (1) Corrosive gaseous atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Rating) 1. When using with partial load (rheostat), minimize the power depending on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P.R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. Notice (Soldering and Mounting) 1. Soldering (1) Standard soldering condition (a) Reflow and flow soldering: Refer to the standard temperature profile. (b) Soldering iron: >Temperature of tip 260 deg.C max. >Soldering time 3 sec. max. >Diameter 2mm dia. max. >Wattage of iron 30W max. Before using other soldering conditions than those listed above, please consult with a Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (2) Cannot be soldered using the flow soldering method. If you use the flow soldering method, the trimmer potentiometer may not function. (3) The soldering iron should not come in contact with the case of the trimmer potentiometer. If such contact does occur, the trimmer potentiometer may be damaged. (4) Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals. 2. Mounting (1) Use our standard land dimension. Excessive land area causes displacement due to the effect of the surface tension of the solder. Insufficient land area leads to insufficient soldering strength of the chip. (2) Do not apply excessive force (preferably 9.8N (Ref.; 1kgf) max.), when the trimmer potentiometer is mounted to the PCB. (3) Do not warp and/or bend PC board to prevent trimmer potentiometer from breakage. (4) In chip placers, the recommended size of the cylindrical pick-up nozzle should be outer dimension 4.0mm dia. and inner dimension 2.0mm dia. 3. Cleaning (1) Isopropyl-alcohol and Ethyl-alcohol are applicable solvents for cleaning. If you use any other types of solvents, please consult with a Murata factory representative prior to using. (2) The total cleaning time by cold dipping, vapor and ultrasonic washing (conditions as below) method should be less than 3 minutes. (3) For ultra-sonic cleaning, the available condition is as follows. >Power: 600W (67 liter) max. >Frequency: 28kHz >Temperature: Ambient temperature Due to the ultra-sonic cleaning equipment's peculiar self-resonance point and that the cleaning compatibility usually depends on the jig construction and/or the cleaning condition such as the depth of immersion, please check the 6 Continued on the following page. 39 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVG5/PV01 Series Notice Continued from the preceding page. cleaning equipment to determine the suitable conditions. If the trimmer potentiometer is cleaned by other conditions, the trimmer potentiometer may be damaged. Reflow Soldering Standard Profile For reflow soldering Pre-heating (in the air) Soldering Gradual Cooling (in the air) Temperature (C) 230 200 100 0 60-120 sec. 30 sec. max. Time (Melting zone) Notice (Handling) 6 1. Use suitable screwdrivers that fit comfortably in driver slot. We recommend the screwdrivers below. * Recommended screwdrivers for manual adjustment <PVG5 series> VESSEL MFG. : NO.9000-1.3x30 (Murata P/N : KMDR130) <PV01 series> ENGINEER INC. : DA-40 (Murata P/N : KMDR180) We can supply the screwdrivers above. If you place order, please specify Murata P/N. Notice (Other) 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata cannot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 40 2. Don't apply more than 9.8N (Ref.; 1kgf) of twist and stress after mounting onto PCB to prevent contact intermittence. If excessive force is applied, the trimmer potentiometer may not function. 3. When adjusting with a screwdriver, do not apply excessive force (preferable 4.9N (Ref; 500gf) max.) 4. When using a lock paint to fix slot position, please use adhesive resin without chlorine or sulfur (Three-bond "1401 series"). R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers Lead Sealed Type Single-turn PVC6/PV32/PV34 Series PVC6 Series 6.9 Features 0.55Wx3.2Lx1.3D 7.0 3.2 Dia. 3-0.5 Dia. 2.5 #3 2.5 #2 #2 #1 CLOCKWISE 2.5 PVC6A #3 mm (Tolerancein: 0.3 ) #1 6.9 5.2 6.9 0.55Wx3.2Lx1.3D 7.0 3.2 Dia. 3-0.5 Dia. 2.5 #3 2.5 Applications #2 #2 2. CRT display 4. Professional cameras 6. FAX 8. OA Equipment #1 CLOCKWISE PVC6D 2.5 1. DY 3. Power supply 5. CATV 7. Printers 9. Sensors 5.2 6.9 1. Enlarged and colored rotor provides superior adjustability. 2. Cone-shaped rotor improves driver insertion during automatic adjustment. 3. Available for "Zero" plus adjustment tool (taper head) use 4. Easy to see 11-scales adjustment positions. 5. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 6. Available for ultrasonic cleaning after soldering 7. During cutting process by the inserter machine, the round shaped lead wire prevents clinch problems and realizes longer life of cutter than flat shaped lead wire. 8. Flammability: UL94V-0 9. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. #3 mm (Tolerancein: 0.3 ) #1 0.55Wx3.2Lx1.3D 6.5 6.9 3-0.5 Dia. 7 7.5 2-5.5 4.6 8.0 3.2 Dia. #1 #2 #3 2.5 6.0 #2 2.5 2.5 #1 CLOCKWISE PVC6E #3 0.75 mm (Tolerancein: 0.3 ) 0.55Wx3.2Lx1.3D 6.9 6.5 6.9 0.55Wx3.2Lx1.3D 8.0 5.5 3-0.5 Dia. 3-0.5 Dia. 2-7.5 7.0 3.2 Dia. 4.6 5.2 6.9 3.2 Dia. 2.5 #2 2.5 PVC6M #1 #1 CLOCKWISE #3 mm (Tolerancein: 0.3 ) 2.5 6.0 2.5 #2 #2 #1 CLOCKWISE PVC6H 0.75 2.5 #1 #2 #3 #3 #3 mm (Tolerance in: 0.3 ) Continued on the following page. 41 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. 0.55Wx3.2Lx1.3D 0.55Wx3.2Lx1.3D 6.5 6.9 6.5 6.9 3.2 Dia. 3-0.5 Dia. 3-0.5 Dia. #3 #2 #1 2.5 #1 #2 #3 2.5 6.0 #1 CLOCKWISE 0.75 PVC6G 6.0 2.5 #2 #2 3.25 2.5 2.5 #3 PVC6Q #1 CLOCKWISE Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVC6p100C01 0.5W(70C) Flow/Soldering Iron 1(2405) 10ohm 10% 100ppm/C PVC6p200C01 0.5W(70C) Flow/Soldering Iron 1(2405) 20ohm 10% 100ppm/C PVC6p250C01 0.5W(70C) Flow/Soldering Iron 1(2405) 25ohm 10% 100ppm/C PVC6p500C01 0.5W(70C) Flow/Soldering Iron 1(2405) 50ohm 10% 100ppm/C PVC6p101C01 0.5W(70C) Flow/Soldering Iron 1(2405) 100ohm 10% 100ppm/C PVC6p201C01 0.5W(70C) Flow/Soldering Iron 1(2405) 200ohm 10% 100ppm/C PVC6p251C01 0.5W(70C) Flow/Soldering Iron 1(2405) 250ohm 10% 100ppm/C PVC6p501C01 0.5W(70C) Flow/Soldering Iron 1(2405) 500ohm 10% 100ppm/C PVC6p102C01 0.5W(70C) Flow/Soldering Iron 1(2405) 1k ohm 10% 100ppm/C PVC6p202C01 0.5W(70C) Flow/Soldering Iron 1(2405) 2k ohm 10% 100ppm/C PVC6p252C01 0.5W(70C) Flow/Soldering Iron 1(2405) 2.5k ohm 10% 100ppm/C PVC6p502C01 0.5W(70C) Flow/Soldering Iron 1(2405) 5k ohm 10% 100ppm/C PVC6p103C01 0.5W(70C) Flow/Soldering Iron 1(2405) 10k ohm 10% 100ppm/C PVC6p203C01 0.5W(70C) Flow/Soldering Iron 1(2405) 20k ohm 10% 100ppm/C PVC6p253C01 0.5W(70C) Flow/Soldering Iron 1(2405) 25k ohm 10% 100ppm/C PVC6p503C01 0.5W(70C) Flow/Soldering Iron 1(2405) 50k ohm 10% 100ppm/C PVC6p104C01 0.5W(70C) Flow/Soldering Iron 1(2405) 100k ohm 10% 100ppm/C PVC6p204C01 0.5W(70C) Flow/Soldering Iron 1(2405) 200k ohm 10% 100ppm/C PVC6p254C01 0.5W(70C) Flow/Soldering Iron 1(2405) 250k ohm 10% 100ppm/C PVC6p504C01 0.5W(70C) Flow/Soldering Iron 1(2405) 500k ohm 10% 100ppm/C PVC6p105C01 0.5W(70C) Flow/Soldering Iron 1(2405) 1M ohm 10% 100ppm/C PVC6p205C01 0.5W(70C) Flow/Soldering Iron 1(2405) 2M ohm 10% 100ppm/C PVC6p505C01 0.5W(70C) Flow/Soldering Iron 1(2405) 5M ohm 10% 100ppm/C PVC6p100C04 0.5W(70C) Flow/Soldering Iron 1(2405) 10ohm 10% 100ppm/C PVC6p200C04 0.5W(70C) Flow/Soldering Iron 1(2405) 20ohm 10% 100ppm/C PVC6p250C04 0.5W(70C) Flow/Soldering Iron 1(2405) 25ohm 10% 100ppm/C PVC6p500C04 0.5W(70C) Flow/Soldering Iron 1(2405) 50ohm 10% 100ppm/C PVC6p101C04 0.5W(70C) Flow/Soldering Iron 1(2405) 100ohm 10% 100ppm/C PVC6p201C04 0.5W(70C) Flow/Soldering Iron 1(2405) 200ohm 10% 100ppm/C PVC6p251C04 0.5W(70C) Flow/Soldering Iron 1(2405) 250ohm 10% 100ppm/C PVC6p501C04 0.5W(70C) Flow/Soldering Iron 1(2405) 500ohm 10% 100ppm/C PVC6p102C04 0.5W(70C) Flow/Soldering Iron 1(2405) 1k ohm 10% 100ppm/C PVC6p202C04 0.5W(70C) Flow/Soldering Iron 1(2405) 2k ohm 10% 100ppm/C PVC6p252C04 0.5W(70C) Flow/Soldering Iron 1(2405) 2.5k ohm 10% 100ppm/C PVC6p502C04 0.5W(70C) Flow/Soldering Iron 1(2405) 5k ohm 10% 100ppm/C PVC6p103C04 0.5W(70C) Flow/Soldering Iron 1(2405) 10k ohm 10% 100ppm/C PVC6p203C04 0.5W(70C) Flow/Soldering Iron 1(2405) 20k ohm 10% 100ppm/C PVC6p253C04 0.5W(70C) Flow/Soldering Iron 1(2405) 25k ohm 10% 100ppm/C PVC6p503C04 0.5W(70C) Flow/Soldering Iron 1(2405) 50k ohm 10% 100ppm/C PVC6p104C04 0.5W(70C) Flow/Soldering Iron 1(2405) 100k ohm 10% 100ppm/C PVC6p204C04 0.5W(70C) Flow/Soldering Iron 1(2405) 200k ohm 10% 100ppm/C PVC6p254C04 0.5W(70C) Flow/Soldering Iron 1(2405) 250k ohm 10% 100ppm/C PVC6p504C04 0.5W(70C) Flow/Soldering Iron 1(2405) 500k ohm 10% 100ppm/C PVC6p105C04 0.5W(70C) Flow/Soldering Iron 1(2405) 1M ohm 10% 100ppm/C Continued on the following page. 42 #3 mm (Tolerancein: 0.3 ) mm (Tolerancein: 0.3 ) Power Rating Part Number 7 8.0 3-5.5 2-7.5 5.5 4.6 4.6 8.0 3.2 Dia. R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PVC6p205C04 0.5W(70C) Flow/Soldering Iron 1(2405) 2M ohm 10% 100ppm/C PVC6p505C04 0.5W(70C) Flow/Soldering Iron 1(2405) 5M ohm 10% 100ppm/C Part Number Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (A, D, E, G, H, M and Q). The order quantity should be an integral multiple of the "Minimum Quantity" . The last three digits express the individual specification codes. C01 for standard type and C04 for radial taping type (PVC6M/PVC6Q series only). Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PVC6p100A01 0.5(70C) Flow/Soldering Iron 1(2405) 10 ohm10% 100 PVC6p200A01 0.5(70C) Flow/Soldering Iron 1(2405) 20 ohm10% 100 PVC6p250A01 0.5(70C) Flow/Soldering Iron 1(2405) 25 ohm10% 100 PVC6p500A01 0.5(70C) Flow/Soldering Iron 1(2405) 50 ohm10% 100 PVC6p101A01 0.5(70C) Flow/Soldering Iron 1(2405) 100 ohm10% 100 PVC6p201A01 0.5(70C) Flow/Soldering Iron 1(2405) 200 ohm10% 100 PVC6p251A01 0.5(70C) Flow/Soldering Iron 1(2405) 250 ohm10% 100 PVC6p501A01 0.5(70C) Flow/Soldering Iron 1(2405) 500 ohm10% 100 PVC6p102A01 0.5(70C) Flow/Soldering Iron 1(2405) 1k ohm10% 100 PVC6p202A01 0.5(70C) Flow/Soldering Iron 1(2405) 2k ohm10% 100 PVC6p252A01 0.5(70C) Flow/Soldering Iron 1(2405) 2.5k ohm10% 100 PVC6p502A01 0.5(70C) Flow/Soldering Iron 1(2405) 5k ohm10% 100 PVC6p103A01 0.5(70C) Flow/Soldering Iron 1(2405) 10k ohm10% 100 PVC6p203A01 0.5(70C) Flow/Soldering Iron 1(2405) 20k ohm10% 100 PVC6p253A01 0.5(70C) Flow/Soldering Iron 1(2405) 25k ohm10% 100 PVC6p503A01 0.5(70C) Flow/Soldering Iron 1(2405) 50k ohm10% 100 Product PVC6p104A01 0.5(70C) Flow/Soldering Iron 1(2405) 100k ohm10% 100 (Cd included) PVC6p204A01 0.5(70C) Flow/Soldering Iron 1(2405) 200k ohm10% 100 PVC6p254A01 0.5(70C) Flow/Soldering Iron 1(2405) 250k ohm10% 100 PVC6p504A01 0.5(70C) Flow/Soldering Iron 1(2405) 500k ohm10% 100 PVC6p105A01 0.5(70C) Flow/Soldering Iron 1(2405) 1M ohm10% 100 PVC6p205A01 0.5(70C) Flow/Soldering Iron 1(2405) 2M ohm10% 100 PVC6p505A01 0.5(70C) Flow/Soldering Iron 1(2405) 5M ohm10% 100 PVC6p100A04 0.5(70C) Flow/Soldering Iron 1(2405) 10 ohm10% 100 PVC6p200A04 0.5(70C) Flow/Soldering Iron 1(2405) 20 ohm10% 100 PVC6p250A04 0.5(70C) Flow/Soldering Iron 1(2405) 25 ohm10% 100 PVC6p500A04 0.5(70C) Flow/Soldering Iron 1(2405) 50 ohm10% 100 PVC6p101A04 0.5(70C) Flow/Soldering Iron 1(2405) 100 ohm10% 100 PVC6p201A04 0.5(70C) Flow/Soldering Iron 1(2405) 200 ohm10% 100 PVC6p251A04 0.5(70C) Flow/Soldering Iron 1(2405) 250 ohm10% 100 PVC6p501A04 0.5(70C) Flow/Soldering Iron 1(2405) 500 ohm10% 100 PVC6p102A04 0.5(70C) Flow/Soldering Iron 1(2405) 1k ohm10% 100 PVC6p202A04 0.5(70C) Flow/Soldering Iron 1(2405) 2k ohm10% 100 PVC6p252A04 0.5(70C) Flow/Soldering Iron 1(2405) 2.5k ohm10% 100 PVC6p502A04 0.5(70C) Flow/Soldering Iron 1(2405) 5k ohm10% 100 PVC6p103A04 0.5(70C) Flow/Soldering Iron 1(2405) 10k ohm10% 100 PVC6p203A04 0.5(70C) Flow/Soldering Iron 1(2405) 20k ohm10% 100 PVC6p253A04 0.5(70C) Flow/Soldering Iron 1(2405) 25k ohm10% 100 PVC6p503A04 0.5(70C) Flow/Soldering Iron 1(2405) 50k ohm10% 100 Product PVC6p104A04 0.5(70C) Flow/Soldering Iron 1(2405) 100k ohm10% 100 (Cd included) PVC6p204A04 0.5(70C) Flow/Soldering Iron 1(2405) 200k ohm10% 100 PVC6p254A04 0.5(70C) Flow/Soldering Iron 1(2405) 250k ohm10% 100 PVC6p504A04 0.5(70C) Flow/Soldering Iron 1(2405) 500k ohm10% 100 PVC6p105A04 0.5(70C) Flow/Soldering Iron 1(2405) 1M ohm10% 100 PVC6p205A04 0.5(70C) Flow/Soldering Iron 1(2405) 2M ohm10% 100 PVC6p505A04 0.5(70C) Flow/Soldering Iron 1(2405) 5M ohm10% 100 Part Number Remarks Non Standard Product (Cd Free) Non Standard Non Standard 7 Product (Cd Free) Non Standard Continued on the following page. 43 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Construction Rotor Cover "O"-Ring Ceramic Substrate Wiper Case Terminal Mounting Holes PVC6A/PVC6E PVC6D/PVC6H 2.5 2.5 (3) 2.5 (2) (1) (3) 2.5 (1) 2.5 2.5 (2) Tolerance:0.1 in mm Tolerance:0.1 in mm PVC6M/PVC6Q PVC6G 2.5 (1) (2) 2.5 (3) (1) 2.5 (3) 7 2.5 2.5 (2) Tolerance:0.1 in mm Tolerance 0.1 in mm Continued on the following page. 44 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% V.S.S. 1% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 2% TR 2% V.S.S. 1% TR 2% V.S.S. 1% TR 4% TR : Total Resistance Change V.S.S. : Voltage Setting Stability IR : Insulation Resistance 7 45 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV32 Series 4.10.3 2.8 Dia. 4.60.3 0.6 1.0 Depth Features 1. 6 standard terminal styles 2. Round shaped body enables smaller area mount than same 6mm square potentiometer. 3. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 4. Available for ultrasonic cleaning after soldering 5. Flammability : UL94V-0 0.85 Dia. max. 3-0.50.1 Dia. #1 #2 #3 #2 5 2. Applications 2. Professional cameras 4. FAX 6. Sensors #1 CLOCKWISE #3 mm (Tolerancein: 0.3 ) 2. 5 CL 0.4 906 PV32H 0.6 1.0 Depth 2.8 Dia. 1. HDTVs 3. CATV 5. Printers 7. Power supply 0.35 max. 8.01.0 6.60.5 Dia. 3-0.50.1 Dia. 6.00.3 0.2 7.01.0 5.50.3 6.60.5 Dia. #1 #2 #3 #2 #1 CLOCKWISE #3 PV32R 2.5 mm (Tolerancein: 0.3 ) 2.5 0.6 1.0 Depth 6.40.4 2.8 DIA 6.9 1.0 PV32N ( mm (Tolerancein: 0.3 ) 6.40.4 6.9 8.00.3 5.51.0 4.70.3 3-0.50.1 Dia. 8.01.0 2.8 Dia. 0.20.1 8.00.3 8.01.0 5.90.4 0.6 1.0 Depth 5.90.4 0.6 1.0 Depth 4.70.3 2.5 2.5 ) 6.40.4 6.9 6.51.0 #1 #3 CLOCKWISE in mm Tolerance : 0.3 2.5 2.8 Dia. 8.00.3 2.5 2.5 #2 #1 #3 CLOCKWISE 2.5 0.20.1 5.01.0 4.70.3 5.0 #2 PV32P #1 #2 #3 #1 #2 #3 5.0 2.5 2.5 3-0.50.1 Dia. 5.0 2.5 #2 #1 #3 CLOCKWISE PV32T #1 CLOCKWISE 1.0 1.0 2.5 #2 PV32S 3-0.50.1 Dia. #3 #2 #1 #1 #2 #3 7 6.01.0 2.8 Dia. 0.20.1 6.00.3 0.2 7.01.0 5.50.3 6.60.5 DIA. 3-0.50.1 DIA. 5.90.4 0.6 1.0 Depth #3 2.5 2.5 mm (Tolerancein: 0.3 ) mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV32p100A01 0.5W(70C) Flow/Soldering Iron 1(2305) 10ohm 20% 100ppm/C PV32p200A01 0.5W(70C) Flow/Soldering Iron 1(2305) 20ohm 20% 100ppm/C PV32p250A01 0.5W(70C) Flow/Soldering Iron 1(2305) 25ohm 20% 100ppm/C Part Number Continued on the following page. 46 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) PV32p500A01 0.5W(70C) Flow/Soldering Iron PV32p101A01 0.5W(70C) Flow/Soldering Iron PV32p201A01 0.5W(70C) PV32p251A01 Part Number Total Resistance Value TCR 1(2305) 50ohm 20% 100ppm/C 1(2305) 100ohm 20% 100ppm/C Flow/Soldering Iron 1(2305) 200ohm 20% 100ppm/C 0.5W(70C) Flow/Soldering Iron 1(2305) 250ohm 20% 100ppm/C PV32p501A01 0.5W(70C) Flow/Soldering Iron 1(2305) 500ohm 20% 100ppm/C PV32p102A01 0.5W(70C) Flow/Soldering Iron 1(2305) 1k ohm 20% 100ppm/C PV32p202A01 0.5W(70C) Flow/Soldering Iron 1(2305) 2k ohm 20% 100ppm/C PV32p252A01 0.5W(70C) Flow/Soldering Iron 1(2305) 2.5k ohm 20% 100ppm/C PV32p502A01 0.5W(70C) Flow/Soldering Iron 1(2305) 5k ohm 20% 100ppm/C PV32p103A01 0.5W(70C) Flow/Soldering Iron 1(2305) 10k ohm 20% 100ppm/C PV32p203A01 0.5W(70C) Flow/Soldering Iron 1(2305) 20k ohm 20% 100ppm/C PV32p253A01 0.5W(70C) Flow/Soldering Iron 1(2305) 25k ohm 20% 100ppm/C PV32p503A01 0.5W(70C) Flow/Soldering Iron 1(2305) 50k ohm 20% 100ppm/C PV32p104A01 0.5W(70C) Flow/Soldering Iron 1(2305) 100k ohm 20% 100ppm/C PV32p204A01 0.5W(70C) Flow/Soldering Iron 1(2305) 200k ohm 20% 100ppm/C PV32p254A01 0.5W(70C) Flow/Soldering Iron 1(2305) 250k ohm 20% 100ppm/C PV32p504A01 0.5W(70C) Flow/Soldering Iron 1(2305) 500k ohm 20% 100ppm/C PV32p105A01 0.5W(70C) Flow/Soldering Iron 1(2305) 1M ohm 20% 100ppm/C PV32p205A01 0.5W(70C) Flow/Soldering Iron 1(2305) 2M ohm 20% 100ppm/C PV32p505A01 0.5W(70C) Flow/Soldering Iron 1(2305) 5M ohm 20% 100ppm/C Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (H, P, R, N, S and T). The order quantity should be an integral multiple of the "Minimum Quantity". Construction Rotor Cover "O"-Ring Wiper Resistive Element Ceramic Substrate Terminal 7 Mounting Holes PV32H PV32R (2) (3) 5 2. 2. 5 (1) (2) 2.5 (1) 2.5 (3) Tolerance:0.1 in mm Tolerance:0.1 in mm Continued on the following page. 47 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Mounting Holes PV32P/PV32S PV32N 2.5 2.5 2.5 (2) (3) (3) (1) 2.5 (1) 2.5 2.5 (2) Tolerance:0.1 in mm PV32T 2.5 2.5 (1) 2.5 (3) (2) Tolerance:0.1 in mm Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) 7 Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 2% TR 2% V.S.S. 1% TR 2% V.S.S. 1% TR 4% TR : Total Resistance Change V.S.S. : Voltage Setting Stability IR : Insulation Resistance 48 Tolerance 0.1 in mm R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV34 Series 9.6 0.3 3-0.50.1 Dia. 5.3 9.6 3.8 Dia. 1. 5 standard terminal styles 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Flammability : UL94V-0 5. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 2.5 2.5 #1 5.1 #3 #2 #1 PV34F mm (Tolerancein: 0.3 ) 9.6 4.9 0.4 5.50.5 5.3 9.6 0.8 1.0 Depth 3.8 DIA. 2. Professional cameras 4. Printers 6. Switching power supplies #3 CLOCKWISE 2.20.4 #2 Applications 1. HDTVs 3. CATV 5. Sensors 5.50.5 4.9 0.8 1.0 Depth Features 3-0.50.1 DIA. #1 #2 #3 2.5 #2 #1 #3 PV34H 1.40.4 CLOCKWISE 2.5 2.5 mm ( Tolerancein0.3 ( 9.6 5.50.5 0.8 1.0 Depth 4.9 3-0.50.1 Dia. 5.3 9.6 3.8 Dia. 0.3 2.5 2.5 PV34P #2 2.5 4.80.4 #1 #3 #1 mm (Tolerancein: 0.3 ) 4.9 9.6 5.3 0.4 5.50.5 9.6 5.3 5.50.5 0.4 9.6 3.8 Dia. 0.8 1.0 Depth 4.9 3.8 Dia. 0.8 1.0 Depth #2 9.6 3-0.50.1 Dia. 3-0.50.1 Dia. #1 #2 #3 #3 #2 #1 #2 #3 CLOCKWISE PV34X 2.5 2.5 in mm Tolerance : 0.3 ( #1 #3 CLOCKWISE ) 1.40.4 2.5 2.5 2.40.4 PV34W 2.5 #2 #1 #3 CLOCKWISE mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV34p100C01 0.5W(70C) Flow/Soldering Iron 1(28015) 10ohm 10% 150ppm/C PV34p200C01 0.5W(70C) Flow/Soldering Iron 1(28015) 20ohm 10% 150ppm/C PV34p500C01 0.5W(70C) Flow/Soldering Iron 1(28015) 50ohm 10% 150ppm/C Part Number Continued on the following page. 49 7 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV34p101C01 0.5W(70C) Flow/Soldering Iron 1(28015) 100ohm 10% 150ppm/C PV34p201C01 0.5W(70C) Flow/Soldering Iron 1(28015) 200ohm 10% 100ppm/C PV34p501C01 0.5W(70C) Flow/Soldering Iron 1(28015) 500ohm 10% 100ppm/C PV34p102C01 0.5W(70C) Flow/Soldering Iron 1(28015) 1k ohm 10% 100ppm/C PV34p202C01 0.5W(70C) Flow/Soldering Iron 1(28015) 2k ohm 10% 100ppm/C PV34p502C01 0.5W(70C) Flow/Soldering Iron 1(28015) 5k ohm 10% 100ppm/C PV34p103C01 0.5W(70C) Flow/Soldering Iron 1(28015) 10k ohm 10% 100ppm/C PV34p203C01 0.5W(70C) Flow/Soldering Iron 1(28015) 20k ohm 10% 100ppm/C PV34p253C01 0.5W(70C) Flow/Soldering Iron 1(28015) 25k ohm 10% 100ppm/C PV34p503C01 0.5W(70C) Flow/Soldering Iron 1(28015) 50k ohm 10% 100ppm/C PV34p104C01 0.5W(70C) Flow/Soldering Iron 1(28015) 100k ohm 10% 100ppm/C PV34p204C01 0.5W(70C) Flow/Soldering Iron 1(28015) 200k ohm 10% 100ppm/C PV34p254C01 0.5W(70C) Flow/Soldering Iron 1(28015) 250k ohm 10% 100ppm/C PV34p504C01 0.5W(70C) Flow/Soldering Iron 1(28015) 500k ohm 10% 100ppm/C PV34p105C01 0.5W(70C) Flow/Soldering Iron 1(28015) 1M ohm 10% 100ppm/C PV34p205C01 0.5W(70C) Flow/Soldering Iron 1(28015) 2M ohm 10% 100ppm/C Part Number Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (F, H, P, X and W). The order quantity should be an integral multiple of the "Minimum Quantity". Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV34p100A01 0.5(70C) Flow/Soldering Iron 1(28015) 10 ohm10% 100 PV34p200A01 0.5(70C) Flow/Soldering Iron 1(28015) 20 ohm10% 100 PV34p500A01 0.5(70C) Flow/Soldering Iron 1(28015) 50 ohm10% 100 PV34p101A01 0.5(70C) Flow/Soldering Iron 1(28015) 100 ohm10% 100 PV34p201A01 0.5(70C) Flow/Soldering Iron 1(28015) 200 ohm10% 100 PV34p501A01 0.5(70C) Flow/Soldering Iron 1(28015) 500 ohm10% 100 PV34p102A01 0.5(70C) Flow/Soldering Iron 1(28015) 1k ohm10% 100 PV34p202A01 0.5(70C) Flow/Soldering Iron 1(28015) 2k ohm10% 100 PV34p502A01 0.5(70C) Flow/Soldering Iron 1(28015) 5k ohm10% 100 PV34p103A01 0.5(70C) Flow/Soldering Iron 1(28015) 10k ohm10% 100 Product PV34p203A01 0.5(70C) Flow/Soldering Iron 1(28015) 20k ohm10% 100 (Cd included) PV34p253A01 0.5(70C) Flow/Soldering Iron 1(28015) 25k ohm10% 100 PV34p503A01 0.5(70C) Flow/Soldering Iron 1(28015) 50k ohm10% 100 PV34p104A01 0.5(70C) Flow/Soldering Iron 1(28015) 100k ohm10% 100 PV34p204A01 0.5(70C) Flow/Soldering Iron 1(28015) 200k ohm10% 100 PV34p254A01 0.5(70C) Flow/Soldering Iron 1(28015) 250k ohm10% 100 PV34p504A01 0.5(70C) Flow/Soldering Iron 1(28015) 500k ohm10% 100 PV34p105A01 0.5(70C) Flow/Soldering Iron 1(28015) 1M ohm10% 100 PV34p205A01 0.5(70C) Flow/Soldering Iron 1(28015) 2M ohm10% 100 Part Number 7 Construction Case Rotor "O"-Ring Wiper Cermet Resistive Element 50 Alumina Substrate Terminal Remarks Non Standard R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Mounting Holes PV34F PV34H/PV34P 2.5 2.5 2.5 (1) (3) (3) 2.5 5.1 (1) 2.5 (2) (2) Tolerance:0.1 in mm Tolerance:0.1 in mm PV34W PV34X 2.5 (1) (2) 2.5 (3) (1) 2.5 (3) 2.5 2.5 (2) Tolerance:0.1 in mm Tolerance 0.1 in mm Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 2% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR RV100kohm ... 3% 7 RG100kohm ... 5% TR V.S.S. IR R : Total Resistance Change : Voltage Setting Stability : Insulation Resistance : Standard Total Resistance 51 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVC6/PV32/PV34 Series Notice Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40 deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. If you use the trimmer potentiometer in an environment other than listed below, please consult with a Murata factory representative prior to using. The trimmer potentiometer should not be used under the following environmental conditions: (1) Corrosive gaseous atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Rating) 1. When using with partial load (rheostat), minimize the power depending on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P.R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. Notice (Soldering and Mounting) 7 1. Soldering (1) Standard soldering condition (a) Flow soldering : >Pre-heating temp. 80-100 deg. C >Soldering temp. 260 deg. C max. >Soldering time 3 sec. max. (b) Soldering iron : >Temperature of tip 300 deg. C max. >Soldering time 3 sec. max. >Wattage of iron 40W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer potentiometer may deviate from the specified characteristics. (2) To minimize mechanical stress when adjusting, the trimmer potentiometer should be mounted onto PCB without gap. (3) The soldering iron should not come in contact with the case of the trimmer potentiometer. If such contact does occur, the trimmer potentiometer may be damaged. 2. Mounting (1) Use PCB hole to meet the pin of the trimmer potentiometer. If the trimmer potentiometer installs into insufficient PCB hole, the 52 trimmer potentimeter may be damaged by mechanical stress. (2) Do not apply excessive force (preferably 9.8N (Ref.; 1kgf) max.), when the trimmer potentiometer is mounted to the PCB. 3. Cleaning (1) Isopropyl-alcohol and Ethyl-alcohol are applicable solvents for cleaning. If you use any other types of solvents, please consult with a Murata factory representative prior to using. (2) The total cleaning time by cold dipping, vapor and ultrasonic washing (conditions as below) method should be less than 3 minutes. (3) For ultra-sonic cleaning, the available condition is as follows. >Power: 600W (67 liter) max. >Frequency: 28kHz >Temperature: Ambient temperature Due to the ultra-sonic cleaning equipment's peculiar self-resonance point and that the cleaning compatibility usually depends on the jig construction and/or the cleaning condition such as the depth of immersion, please check the cleaning equipment to determine the suitable conditions. If the trimmer potentiometer is cleaned by other conditions, the trimmer potentiometer may be damaged. catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVC6/PV32/PV34 Series Notice Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. We recommend the screwdrivers below. * Recommended screwdriver for manual adjustment <PVC6 series> VESSEL MFG. : NO.9000+0x30 (Murata P/N : KMDR150) TORAY INDUSTRIES, INC. : SA-2225 (Murata P/N : KMDR070) <PV32/34 series> ENGINEER INC. : DA-40 (Murata P/N : KMDR180) * Recommended screwdriver bit for automatic adjustment <PVC6 series> VESSEL MFG. : NO.CA-10 (Murata P/N : KMBT090) TORAY INDUSTRIES, INC. : JB-2225 (Murata P/N : KMBT070) We can supply the screwdrivers avobe. If you place an order, please specify the Murata P/N. 2. Don't apply more than 9.8N (Ref.; 1kgf) of twist and stress after mounting onto PCB to prevent contact intermittence. If excessive force is applied, the trimmer potentiometer may not function. 3. When adjusting with an adjustment tool, the applied force to the adjustment screw should not exceed 4.9N (Ref.; 500gf). If excessive force is applied, the trimmer potentiometer may not function due to damage. 4. The rotational torque at the position of the adjustment range should not exceed the stop strength. 5. When using a lock paint to fix slot position, please use adhesive resin without chlorine or sulfur (Three-bond "1401 series"). Notice (Other) 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata cannot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 7 53 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers Lead Sealed Type Multi-turns PV12/PV37/PV23/PV22/PV36 Series PV12 Series 0.60.1 0.70.1 Depth 3-0.50.1 Dia. 2.50.1 0. 2 2. 5 #2 2 0. 0.40.1 0.5 5 2. 1. The unique inner gear system recognizes the position of the center of the shaft of the potentiometer. 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 7.01.0 6.60.1 7.60.1 Dia. Features #3 #2 #1 #1 906 PV12H #3 CLOCKWISE Applications mm (Tolerancein: 0.3 ) 1. HDTVs 2. Professional cameras 3. CATV 4. FAX 5. Printers 6. Sensors 7. Switching power supplies 0.60.1 0.70.1 Depth 7.01.0 3-0.50.1 Dia. 2.50.1 7.60.1 Dia. 6.60.1 0.5 2.5 2.5 #2 2.5 #2 #3 #1 #1 #3 CLOCKWISE PV12P mm (Tolerancein: 0.3 ) 7.70.3 #2 #3 7.60.3 9.00.3 5.10.3 0.5 2.50.1 7.01.0 3-0.50.1 Dia. #1 7.70.3 0.60.1 0.70.1 Depth 9.00.3 7.01.0 5.10.3 0.5 2.50.1 0.60.1 0.70.1 Depth 3-0.50.1 Dia. #1 6.30.3 #2 #3 7.60.3 6.30.3 #2 PV12S 8 2.5 2.5 3.6 #1 #1 #3 2.5 2.5 3.6 #2 PV12T CLOCKWISE mm (Tolerancein: 0.3 ) 2.5 2.5 #3 CLOCKWISE mm (Tolerance in: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV12p100A01 0.5W(70C) Flow/Soldering Iron 4 10ohm 10% 100ppm/C PV12p200A01 0.5W(70C) Flow/Soldering Iron 4 20ohm 10% 100ppm/C PV12p500A01 0.5W(70C) Flow/Soldering Iron 4 50ohm 10% 100ppm/C PV12p101A01 0.5W(70C) Flow/Soldering Iron 4 100ohm 10% 100ppm/C PV12p201A01 0.5W(70C) Flow/Soldering Iron 4 200ohm 10% 100ppm/C PV12p501A01 0.5W(70C) Flow/Soldering Iron 4 500ohm 10% 100ppm/C PV12p102A01 0.5W(70C) Flow/Soldering Iron 4 1k ohm 10% 100ppm/C PV12p202A01 0.5W(70C) Flow/Soldering Iron 4 2k ohm 10% 100ppm/C PV12p502A01 0.5W(70C) Flow/Soldering Iron 4 5k ohm 10% 100ppm/C PV12p103A01 0.5W(70C) Flow/Soldering Iron 4 10k ohm 10% 100ppm/C Part Number Continued on the following page. 54 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV12p203A01 0.5W(70C) Flow/Soldering Iron 4 20k ohm 10% 100ppm/C PV12p503A01 0.5W(70C) Flow/Soldering Iron 4 50k ohm 10% 100ppm/C PV12p104A01 0.5W(70C) Flow/Soldering Iron 4 100k ohm 10% 100ppm/C PV12p204A01 0.5W(70C) Flow/Soldering Iron 4 200k ohm 10% 100ppm/C PV12p504A01 0.5W(70C) Flow/Soldering Iron 4 500k ohm 10% 100ppm/C PV12p105A01 0.5W(70C) Flow/Soldering Iron 4 1M ohm 10% 100ppm/C PV12p205A01 0.5W(70C) Flow/Soldering Iron 4 2M ohm 10% 100ppm/C Part Number Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (H, P, T and S). The order quantity should be an integral multiple of the "Minimum Quantity". Construction Shaft Case "O"-Ring Gear Rotor Insert Wiper Ceramic Resistive Element Alumina Substrate Terminal Mounting Holes PV12H PV12P/PV12S (3) 2.5 5 2. 2. 5 (2) (1) (2) 2.5 (1) 2.5 (3) Tolerance:0.1 in mm Tolerance:0.1 in mm 8 PV12T 2.5 2.5 (1) 2.5 (3) (2) Tolerance:0.1 in mm 55 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 3% V.S.S. 2% TR 3% V.S.S. 1.5% TR 3% V.S.S. 1.5% TR 3% TR : Total Resistance Change V.S.S. : Voltage Setting Stability IR : Insulation Resistance 8 56 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV37 Series 0.6 1.0 1.2 Marking 3-0.40.1 Dia. #1 #2 0.60.2 5.01.0 1. Smaller volume (about one-third) than 25-turns potentiometer 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 5. 5 standard terminal styles 6. Both Top and side adjustment directions 7. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 1.80.2 Dia. 4.0 1.1 Features #3 6.4 #3 6.7 0.7 2.5 #2 #1 CLOCKWISE PV37P 2.5 mm (Tolerance in: 0.3 ) 2.5 1.1 6.4 1.2 Applications 5.01.0 6.7 0.6 1.0 Marking 1. Measuring instruments 2. OA equipment 3. Medical equipment 4. Power supply 5. Base station for cellular phone 1.80.2 Dia. 0.60.2 3-0.40.1 Dia. #3 #2 2.5 #2 #1 #3 CLOCKWISE 2.5 4.0 mm (Tolerancein: 0.3 ) 0.7 PV37W #1 2.5 6.4 0.6 1.0 Marking 6.7 5.01.0 0.60.2 1.80.2 Dia. 1.1 1.1 3-0.40.1 Dia. #3 #2 2.5 #1 2.5 4.0 0.7 PV37X 2.5 #2 #1 #3 CLOCKWISE 1.1 6.4 0.6 1.80.2 Dia. 1.2 1.1 mm (Tolerance in: 0.3 ) 6.4 Marking 1.0 0.60.2 #2 #1 2.0 6.7 5.01.0 #2 #1 #3 CLOCKWISE 4.0 PV37Y #3 #2 #1 2.5 2.5 #2 2.5 2.5 PV37Z #1 #3 CLOCKWISE mm (Tolerancein: 0.3 ) 4.0 #3 8 3-0.40.1 Dia. 2.0 3-0.40.1 Dia. 0.60.2 1.80.2 Dia. 5.01.0 6.7 0.6 1.0 1.1 Marking mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV37p100C01 0.25W(85C) Flow/Soldering Iron 12 10ohm 10% 150ppm/C PV37p200C01 0.25W(85C) Flow/Soldering Iron 12 20ohm 10% 150ppm/C PV37p500C01 0.25W(85C) Flow/Soldering Iron 12 50ohm 10% 150ppm/C Part Number Continued on the following page. 57 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV37p101C01 0.25W(85C) Flow/Soldering Iron 12 100ohm 10% 150ppm/C PV37p201C01 0.25W(85C) Flow/Soldering Iron 12 200ohm 10% 150ppm/C PV37p501C01 0.25W(85C) Flow/Soldering Iron 12 500ohm 10% 150ppm/C PV37p102C01 0.25W(85C) Flow/Soldering Iron 12 1k ohm 10% 150ppm/C PV37p202C01 0.25W(85C) Flow/Soldering Iron 12 2k ohm 10% 150ppm/C PV37p502C01 0.25W(85C) Flow/Soldering Iron 12 5k ohm 10% 150ppm/C PV37p103C01 0.25W(85C) Flow/Soldering Iron 12 10k ohm 10% 150ppm/C PV37p203C01 0.25W(85C) Flow/Soldering Iron 12 20k ohm 10% 150ppm/C PV37p253C01 0.25W(85C) Flow/Soldering Iron 12 25k ohm 10% 150ppm/C PV37p503C01 0.25W(85C) Flow/Soldering Iron 12 50k ohm 10% 150ppm/C PV37p104C01 0.25W(85C) Flow/Soldering Iron 12 100k ohm 10% 150ppm/C PV37p204C01 0.25W(85C) Flow/Soldering Iron 12 200k ohm 10% 150ppm/C PV37p254C01 0.25W(85C) Flow/Soldering Iron 12 250k ohm 10% 150ppm/C PV37p504C01 0.25W(85C) Flow/Soldering Iron 12 500k ohm 10% 150ppm/C PV37p105C01 0.25W(85C) Flow/Soldering Iron 12 1M ohm 10% 150ppm/C PV37p205C01 0.25W(85C) Flow/Soldering Iron 12 2M ohm 10% 150ppm/C PV37p100C31 0.25W(85C) Flow/Soldering Iron 12 10ohm 10% 150ppm/C PV37p200C31 0.25W(85C) Flow/Soldering Iron 12 20ohm 10% 150ppm/C PV37p500C31 0.25W(85C) Flow/Soldering Iron 12 50ohm 10% 150ppm/C PV37p101C31 0.25W(85C) Flow/Soldering Iron 12 100ohm 10% 150ppm/C PV37p201C31 0.25W(85C) Flow/Soldering Iron 12 200ohm 10% 150ppm/C PV37p501C31 0.25W(85C) Flow/Soldering Iron 12 500ohm 10% 150ppm/C PV37p102C31 0.25W(85C) Flow/Soldering Iron 12 1k ohm 10% 150ppm/C PV37p202C31 0.25W(85C) Flow/Soldering Iron 12 2k ohm 10% 150ppm/C PV37p502C31 0.25W(85C) Flow/Soldering Iron 12 5k ohm 10% 150ppm/C PV37p103C31 0.25W(85C) Flow/Soldering Iron 12 10k ohm 10% 150ppm/C PV37p203C31 0.25W(85C) Flow/Soldering Iron 12 20k ohm 10% 150ppm/C PV37p253C31 0.25W(85C) Flow/Soldering Iron 12 25k ohm 10% 150ppm/C PV37p503C31 0.25W(85C) Flow/Soldering Iron 12 50k ohm 10% 150ppm/C PV37p104C31 0.25W(85C) Flow/Soldering Iron 12 100k ohm 10% 150ppm/C PV37p204C31 0.25W(85C) Flow/Soldering Iron 12 200k ohm 10% 150ppm/C PV37p254C31 0.25W(85C) Flow/Soldering Iron 12 250k ohm 10% 150ppm/C PV37p504C31 0.25W(85C) Flow/Soldering Iron 12 500k ohm 10% 150ppm/C PV37p105C31 0.25W(85C) Flow/Soldering Iron 12 1M ohm 10% 150ppm/C PV37p205C31 0.25W(85C) Flow/Soldering Iron 12 2M ohm 10% 150ppm/C Part Number Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z). The order quantity should be an integral multiple of the "Minimum Quantity". The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV37Y/PV37Z series only). 8 58 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV37p100A01 0.25(85C) Flow/Soldering Iron 12 10 ohm10% 100 PV37p200A01 0.25(85C) Flow/Soldering Iron 12 20 ohm10% 100 PV37p500A01 0.25(85C) Flow/Soldering Iron 12 50 ohm10% 100 PV37p101A01 0.25(85C) Flow/Soldering Iron 12 100 ohm10% 100 PV37p201A01 0.25(85C) Flow/Soldering Iron 12 200 ohm10% 100 PV37p501A01 0.25(85C) Flow/Soldering Iron 12 500 ohm10% 100 PV37p102A01 0.25(85C) Flow/Soldering Iron 12 1k ohm10% 100 PV37p202A01 0.25(85C) Flow/Soldering Iron 12 2k ohm10% 100 PV37p502A01 0.25(85C) Flow/Soldering Iron 12 5k ohm10% 100 PV37p103A01 0.25(85C) Flow/Soldering Iron 12 10k ohm10% 100 PV37p203A01 0.25(85C) Flow/Soldering Iron 12 20k ohm10% 100 PV37p253A01 0.25(85C) Flow/Soldering Iron 12 25k ohm10% 100 PV37p503A01 0.25(85C) Flow/Soldering Iron 12 50k ohm10% 100 PV37p104A01 0.25(85C) Flow/Soldering Iron 12 100k ohm10% 100 PV37p204A01 0.25(85C) Flow/Soldering Iron 12 200k ohm10% 100 PV37p254A01 0.25(85C) Flow/Soldering Iron 12 250k ohm10% 100 PV37p504A01 0.25(85C) Flow/Soldering Iron 12 500k ohm10% 100 PV37p105A01 0.25(85C) Flow/Soldering Iron 12 1M ohm10% 100 PV37p205A01 0.25(85C) Flow/Soldering Iron 12 2M ohm10% 100 PV37p100A31 0.25(85C) Flow/Soldering Iron 12 10 ohm10% 100 PV37p200A31 0.25(85C) Flow/Soldering Iron 12 20 ohm10% 100 PV37p500A31 0.25(85C) Flow/Soldering Iron 12 50 ohm10% 100 PV37p101A31 0.25(85C) Flow/Soldering Iron 12 100 ohm10% 100 PV37p201A31 0.25(85C) Flow/Soldering Iron 12 200 ohm10% 100 PV37p501A31 0.25(85C) Flow/Soldering Iron 12 500 ohm10% 100 PV37p102A31 0.25(85C) Flow/Soldering Iron 12 1k ohm10% 100 PV37p202A31 0.25(85C) Flow/Soldering Iron 12 2k ohm10% 100 PV37p502A31 0.25(85C) Flow/Soldering Iron 12 5k ohm10% 100 PV37p103A31 0.25(85C) Flow/Soldering Iron 12 10k ohm10% 100 PV37p203A31 0.25(85C) Flow/Soldering Iron 12 20k ohm10% 100 PV37p253A31 0.25(85C) Flow/Soldering Iron 12 25k ohm10% 100 PV37p503A31 0.25(85C) Flow/Soldering Iron 12 50k ohm10% 100 PV37p104A31 0.25(85C) Flow/Soldering Iron 12 100k ohm10% 100 PV37p204A31 0.25(85C) Flow/Soldering Iron 12 200k ohm10% 100 PV37p254A31 0.25(85C) Flow/Soldering Iron 12 250k ohm10% 100 PV37p504A31 0.25(85C) Flow/Soldering Iron 12 500k ohm10% 100 PV37p105A31 0.25(85C) Flow/Soldering Iron 12 1M ohm10% 100 PV37p205A31 0.25(85C) Flow/Soldering Iron 12 2M ohm10% 100 Part Number Remarks Non Standard Product (Cd included) Construction Gear Case 8 Adjustment Screw Terminal Wiper Cermet Resistive Element Alumina Substrate 59 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Mounting Holes PV37P PV37W/PV37X 2.5 2.5 2.5 2.5 (1) (3) (1) 2.5 2.5 (3) (2) (2) Tolerance:0.1 in mm PV37Y/PV37Z (3) (2) 2.5 (1) 2.5 Tolerance:0.1 in mm Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure 8 Rotational Life (200 cycles) TR 1% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR RV100ohm ... 3% RG100ohm ... 2% TR V.S.S. IR R 60 : Total Resistance Change : Voltage Setting Stability : Insulation Resistance : Standard Total Resistance Tolerance 0.1 in mm R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV23 Series 0.8 4.6 0.3 4.9 0.6 1. Small size (4.6x6.4x19.1mm) and high power rating (0.75W at 70deg.C) 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 5. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 6.4 1.5 2.35 Dia. 19.1 Features #2 #3 #2 3.3 12.7 #1 5.1 2.5 PV23P 5.01.0 3-0.50.1 Dia. #1 #3 CLOCKWISE mm (Tolerancein: 0.3 ) Applications 1. Measuring instruments 2. FAX 3. Copier 4. Printers 5. Sensors 4.6 0.3 4.9 0.6 0.8 #3 #2 #2 2.5 17.8 5.01.0 3-0.50.1 Dia. #1 PV23Y 6.4 1.5 2.35 Dia. 19.1 0.6 7.6 #1 #3 CLOCKWISE mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV23p100C01 0.75W(70C) Flow/Soldering Iron 15 10ohm 10% 150ppm/C PV23p200C01 0.75W(70C) Flow/Soldering Iron 15 20ohm 10% 150ppm/C PV23p500C01 0.75W(70C) Flow/Soldering Iron 15 50ohm 10% 150ppm/C PV23p101C01 0.75W(70C) Flow/Soldering Iron 15 100ohm 10% 150ppm/C PV23p201C01 0.75W(70C) Flow/Soldering Iron 15 200ohm 10% 100ppm/C PV23p501C01 0.75W(70C) Flow/Soldering Iron 15 500ohm 10% 100ppm/C PV23p102C01 0.75W(70C) Flow/Soldering Iron 15 1k ohm 10% 100ppm/C PV23p202C01 0.75W(70C) Flow/Soldering Iron 15 2k ohm 10% 100ppm/C PV23p502C01 0.75W(70C) Flow/Soldering Iron 15 5k ohm 10% 100ppm/C PV23p103C01 0.75W(70C) Flow/Soldering Iron 15 10k ohm 10% 100ppm/C PV23p203C01 0.75W(70C) Flow/Soldering Iron 15 20k ohm 10% 100ppm/C PV23p503C01 0.75W(70C) Flow/Soldering Iron 15 50k ohm 10% 100ppm/C PV23p104C01 0.75W(70C) Flow/Soldering Iron 15 100k ohm 10% 100ppm/C PV23p204C01 0.75W(70C) Flow/Soldering Iron 15 200k ohm 10% 100ppm/C PV23p504C01 0.75W(70C) Flow/Soldering Iron 15 500k ohm 10% 100ppm/C PV23p105C01 0.75W(70C) Flow/Soldering Iron 15 1M ohm 10% 100ppm/C PV23p205C01 0.75W(70C) Flow/Soldering Iron 15 2M ohm 10% 100ppm/C Part Number 8 Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (P and Y). The order quantity should be an integral multiple of the "Minimum Quantity". 61 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV23p100A01 0.75(70C) Flow/Soldering Iron 15 10 ohm10% 100 PV23p200A01 0.75(70C) Flow/Soldering Iron 15 20 ohm10% 100 PV23p500A01 0.75(70C) Flow/Soldering Iron 15 50 ohm10% 100 PV23p101A01 0.75(70C) Flow/Soldering Iron 15 100 ohm10% 100 PV23p201A01 0.75(70C) Flow/Soldering Iron 15 200 ohm10% 100 PV23p501A01 0.75(70C) Flow/Soldering Iron 15 500 ohm10% 100 PV23p102A01 0.75(70C) Flow/Soldering Iron 15 1k ohm10% 100 PV23p202A01 0.75(70C) Flow/Soldering Iron 15 2k ohm10% 100 Non Standard PV23p502A01 0.75(70C) Flow/Soldering Iron 15 5k ohm10% 100 Product PV23p103A01 0.75(70C) Flow/Soldering Iron 15 10k ohm10% 100 (Cd included) PV23p203A01 0.75(70C) Flow/Soldering Iron 15 20k ohm10% 100 PV23p503A01 0.75(70C) Flow/Soldering Iron 15 50k ohm10% 100 PV23p104A01 0.75(70C) Flow/Soldering Iron 15 100k ohm10% 100 PV23p204A01 0.75(70C) Flow/Soldering Iron 15 200k ohm10% 100 PV23p504A01 0.75(70C) Flow/Soldering Iron 15 500k ohm10% 100 PV23p105A01 0.75(70C) Flow/Soldering Iron 15 1M ohm10% 100 PV23p205A01 0.75(70C) Flow/Soldering Iron 15 2M ohm10% 100 Part Number Remarks Construction Post Adjustment Screw Case Terminal Alumina Substrate Wiper Cermet Resistive Element Mounting Holes PV23P PV23Y 12.7 17.8 7.6 (3) (1) (3) (1) 2.5 2.5 5.1 (2) (2) 8 Tolerance:0.1 in mm 62 Tolerance:0.1 in mm catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Characteristics Temperature Cycle Humidity Vibration (20G) Shock (50G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 3% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR 3% TR : Total Resistance Change V.S.S. : Voltage Setting Stability IR : Insulation Resistance 8 63 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. 31.8 3.20.2 25.40.2 152 min. 1.7 5.0 4.6 0.60.2 1. High power rating (1W at 70 deg.C) 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 5. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. 0.80.2 #1(Yellow) 4.70.2 Mounting holes 2-2.50.2 Dia. 6.0 6.0 #2 #2 (Red) #1 mm (Tolerancein: 0.3 ) Applications 0.60.2 3.00.2 Dia. 31.8 3.20.2 25.40.2 5.0 4.6 1.7 7.01.0 8.00.4 1. Measuring instruments 2. FAX 3. Copier 4. Printers 5. Sensors #3 CLOCKWISE #3(Green) 1.9 0.80.2 6.0 4.70.2 #2 #1 #3 Mounting holes 2-2.50.2 Dia. 3-0.70.1 Dia. 6.0 #2 #1 #3 CLOCKWISE 17.8 6.6 mm (Tolerance in: 0.3 ) 31.8 0.60.2 3.00.2 Dia. 22.9 3.20.2 25.40.2 5.0 4.6 1.7 1.9 PV22S 7.01.0 8.00.4 PV22L Insulated standard wire 0.80.2 #2 #1 #3 CLOCKWISE PV22Y 7.6 6.6 17.8 8 3-0.70.1 Dia. 6.0 2.5 6.0 4.70.2 #1 #2 #3 Mounting holes 2-2.50.2 Dia. mm (Tolerancein: 0.3 ) Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV22p100C01 1.0W(70C) Flow/Soldering Iron 22 10ohm 10% 100ppm/C PV22p200C01 1.0W(70C) Flow/Soldering Iron 22 20ohm 10% 100ppm/C PV22p500C01 1.0W(70C) Flow/Soldering Iron 22 50ohm 10% 100ppm/C PV22p101C01 1.0W(70C) Flow/Soldering Iron 22 100ohm 10% 100ppm/C PV22p201C01 1.0W(70C) Flow/Soldering Iron 22 200ohm 10% 100ppm/C PV22p501C01 1.0W(70C) Flow/Soldering Iron 22 500ohm 10% 100ppm/C PV22p102C01 1.0W(70C) Flow/Soldering Iron 22 1k ohm 10% 100ppm/C PV22p202C01 1.0W(70C) Flow/Soldering Iron 22 2k ohm 10% 100ppm/C PV22p502C01 1.0W(70C) Flow/Soldering Iron 22 5k ohm 10% 100ppm/C PV22p103C01 1.0W(70C) Flow/Soldering Iron 22 10k ohm 10% 100ppm/C PV22p203C01 1.0W(70C) Flow/Soldering Iron 22 20k ohm 10% 100ppm/C PV22p503C01 1.0W(70C) Flow/Soldering Iron 22 50k ohm 10% 100ppm/C PV22p104C01 1.0W(70C) Flow/Soldering Iron 22 100k ohm 10% 100ppm/C PV22p204C01 1.0W(70C) Flow/Soldering Iron 22 200k ohm 10% 100ppm/C PV22p504C01 1.0W(70C) Flow/Soldering Iron 22 500k ohm 10% 100ppm/C PV22p105C01 1.0W(70C) Flow/Soldering Iron 22 1M ohm 10% 100ppm/C Part Number Continued on the following page. 64 8.00.4 Features 0.60.2 3.00.2 Dia. 1.9 PV22 Series R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Part Number PV22p205C01 Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR 1.0W(70C) Flow/Soldering Iron 22 2M ohm 10% 100ppm/C Operating Temperature Range: -55 to 150 C The blank column is filled with the code of adjustment direction and lead type (L, S and Y). The order quantity should be an integral multiple of the "Minimum Quantity". Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV22p100A01 1.0(70C) Flow/Soldering Iron 22 10 ohm10% 100 PV22p200A01 1.0(70C) Flow/Soldering Iron 22 20 ohm10% 100 PV22p500A01 1.0(70C) Flow/Soldering Iron 22 50 ohm10% 100 PV22p101A01 1.0(70C) Flow/Soldering Iron 22 100 ohm10% 100 PV22p201A01 1.0(70C) Flow/Soldering Iron 22 200 ohm10% 100 PV22p501A01 1.0(70C) Flow/Soldering Iron 22 500 ohm10% 100 PV22p102A01 1.0(70C) Flow/Soldering Iron 22 1k ohm10% 100 PV22p202A01 1.0(70C) Flow/Soldering Iron 22 2k ohm10% 100 PV22p502A01 1.0(70C) Flow/Soldering Iron 22 5k ohm10% 100 Product PV22p103A01 1.0(70C) Flow/Soldering Iron 22 10k ohm10% 100 (Cd included) PV22p203A01 1.0(70C) Flow/Soldering Iron 22 20k ohm10% 100 PV22p503A01 1.0(70C) Flow/Soldering Iron 22 50k ohm10% 100 PV22p104A01 1.0(70C) Flow/Soldering Iron 22 100k ohm10% 100 PV22p204A01 1.0(70C) Flow/Soldering Iron 22 200k ohm10% 100 PV22p504A01 1.0(70C) Flow/Soldering Iron 22 500k ohm10% 100 PV22p105A01 1.0(70C) Flow/Soldering Iron 22 1M ohm10% 100 PV22p205A01 1.0(70C) Flow/Soldering Iron 22 2M ohm10% 100 Part Number Remarks Non Standard Construction Adjustment Screw Post Alumina Substrate Case Cermet Resistive Element Wiper Terminal Mounting Holes PV22S PV22Y 17.8 8 17.8 7.6 (1) (3) (3) (1) 22.9 2.5 (2) (2) Tolerance:0.1 in mm Tolerance:0.1 in mm Continued on the following page. 65 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Characteristics Temperature Cycle Humidity Vibration (20G) Shock (50G) Temperature Load Life Low Temperature Exposure High Temperature Exposure Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 3% V.S.S. 1% TR 1% V.S.S. 1% TR 2% V.S.S. 1% TR 2% TR : Total Resistance Change V.S.S. : Voltage Setting Stability IR : Insulation Resistance 8 66 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV36 Series 1.3 Features 2.0 Dia. 0.6 5.0 6.01.0 1.2 1. High resolution 25-turns enables precision adjustment easily. 2. Sealed construction protects the interior from dust and liquid, which achieves stable performance. 3. Available for ultrasonic cleaning after soldering 4. Clutch mechanism prevents excessive wiper rotation. 5. 5 standard terminal styles 6. Both Top and side adjustment directions. 7. To be complied with RoHS directive by new Cd free cermet resistive material. Pb free terminals with Sn plating. Marking 0.7 1.3 3-0.50.1 Dia. #1 #2 #3 9.6 #1 #3 Clockwise 0.5 PV36P 10.0 5.2 2.5 #2 (Wiper) (in mm) (Tolerance : 0.3) 2.5 2.5 1.2 2.0 Dia. 9.6 Applications 0.6 1.3 Marking 6.01.0 0.5 10.0 0.7 1.3 1. Measuring instruments 2. OA equipment 3. Medical equipment 4. Power supply 5. Base station for cellular phone 3-0.50.1 Dia. #3 #2 #1 #2 (Wiper) 2.5 2.5 #1 2.5 5.0 PV36W #3 Clockwise (in mm) (Tolerance : 0.3) 9.6 0.7 1.3 Marking 6.01.0 10.0 2.0 Dia. 0.6 0.5 1.3 1.2 3-0.50.1 Dia. #3 #2 #1 2.5 2.5 #2 (Wiper) #3 2.5 Clockwise 5.0 #1 PV36X (in mm) (Tolerance : 0.3) 9.6 1.2 9.6 2.0 Dia. 0.6 1.3 0.7 1.3 1.2 #3 #2 #1 #2 (Wiper) 1.2 PV36Z (in mm) (Tolerance : 0.3) #3 Clockwise (in mm) (Tolerance : 0.3) 5.0 #1 Clockwise 2.5 #3 1.2 2.5 5.0 2.5 2.5 #2 (Wiper) #1 PV36Y Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV36p100C01 0.5W(70C) Flow/Soldering Iron 25 10ohm 10% 150ppm/C PV36p200C01 0.5W(70C) Flow/Soldering Iron 25 20ohm 10% 150ppm/C PV36p500C01 0.5W(70C) Flow/Soldering Iron 25 50ohm 10% 150ppm/C Part Number 8 6.01.0 3-0.50.1 Dia. #3 #2 #1 2.5 2.5 10.0 2.0 Dia. 0.6 0.5 0.7 1.3 10.0 6.01.0 0.5 3-0.50.1 Dia. Marking 1.3 Marking Continued on the following page. 67 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Power Rating Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR PV36p101C01 0.5W(70C) Flow/Soldering Iron 25 100ohm 10% 150ppm/C PV36p201C01 0.5W(70C) Flow/Soldering Iron 25 200ohm 10% 100ppm/C PV36p501C01 0.5W(70C) Flow/Soldering Iron 25 500ohm 10% 100ppm/C PV36p102C01 0.5W(70C) Flow/Soldering Iron 25 1k ohm 10% 100ppm/C PV36p202C01 0.5W(70C) Flow/Soldering Iron 25 2k ohm 10% 100ppm/C PV36p502C01 0.5W(70C) Flow/Soldering Iron 25 5k ohm 10% 100ppm/C PV36p103C01 0.5W(70C) Flow/Soldering Iron 25 10k ohm 10% 100ppm/C PV36p203C01 0.5W(70C) Flow/Soldering Iron 25 20k ohm 10% 100ppm/C PV36p253C01 0.5W(70C) Flow/Soldering Iron 25 25k ohm 10% 100ppm/C PV36p503C01 0.5W(70C) Flow/Soldering Iron 25 50k ohm 10% 100ppm/C PV36p104C01 0.5W(70C) Flow/Soldering Iron 25 100k ohm 10% 100ppm/C PV36p204C01 0.5W(70C) Flow/Soldering Iron 25 200k ohm 10% 100ppm/C PV36p254C01 0.5W(70C) Flow/Soldering Iron 25 250k ohm 10% 100ppm/C PV36p504C01 0.5W(70C) Flow/Soldering Iron 25 500k ohm 10% 100ppm/C PV36p105C01 0.5W(70C) Flow/Soldering Iron 25 1M ohm 10% 100ppm/C PV36p205C01 0.5W(70C) Flow/Soldering Iron 25 2M ohm 10% 100ppm/C PV36p100C31 0.5W(70C) Flow/Soldering Iron 25 10ohm 10% 150ppm/C PV36p200C31 0.5W(70C) Flow/Soldering Iron 25 20ohm 10% 150ppm/C PV36p500C31 0.5W(70C) Flow/Soldering Iron 25 50ohm 10% 150ppm/C PV36p101C31 0.5W(70C) Flow/Soldering Iron 25 100ohm 10% 150ppm/C PV36p201C31 0.5W(70C) Flow/Soldering Iron 25 200ohm 10% 100ppm/C PV36p501C31 0.5W(70C) Flow/Soldering Iron 25 500ohm 10% 100ppm/C PV36p102C31 0.5W(70C) Flow/Soldering Iron 25 1k ohm 10% 100ppm/C PV36p202C31 0.5W(70C) Flow/Soldering Iron 25 2k ohm 10% 100ppm/C PV36p502C31 0.5W(70C) Flow/Soldering Iron 25 5k ohm 10% 100ppm/C PV36p103C31 0.5W(70C) Flow/Soldering Iron 25 10k ohm 10% 100ppm/C PV36p203C31 0.5W(70C) Flow/Soldering Iron 25 20k ohm 10% 100ppm/C PV36p253C31 0.5W(70C) Flow/Soldering Iron 25 25k ohm 10% 100ppm/C PV36p503C31 0.5W(70C) Flow/Soldering Iron 25 50k ohm 10% 100ppm/C PV36p104C31 0.5W(70C) Flow/Soldering Iron 25 100k ohm 10% 100ppm/C PV36p204C31 0.5W(70C) Flow/Soldering Iron 25 200k ohm 10% 100ppm/C PV36p254C31 0.5W(70C) Flow/Soldering Iron 25 250k ohm 10% 100ppm/C PV36p504C31 0.5W(70C) Flow/Soldering Iron 25 500k ohm 10% 100ppm/C PV36p105C31 0.5W(70C) Flow/Soldering Iron 25 1M ohm 10% 100ppm/C PV36p205C31 0.5W(70C) Flow/Soldering Iron 25 2M ohm 10% 100ppm/C Part Number Operating Temperature Range: -55 to 125 C The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z). The order quantity should be an integral multiple of the "Minimum Quantity". The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV36W/PV36X series only). 8 68 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Power Rating (W) Soldering Method Number of Turns (Effective Rotation Angle) Total Resistance Value TCR (ppm/C) PV36p100A01 0.5(70C) Flow/Soldering Iron 25 10 ohm10% 100 PV36p200A01 0.5(70C) Flow/Soldering Iron 25 20 ohm10% 100 PV36p500A01 0.5(70C) Flow/Soldering Iron 25 50 ohm10% 100 PV36p101A01 0.5(70C) Flow/Soldering Iron 25 100 ohm10% 100 PV36p201A01 0.5(70C) Flow/Soldering Iron 25 200 ohm10% 100 PV36p501A01 0.5(70C) Flow/Soldering Iron 25 500 ohm10% 100 PV36p102A01 0.5(70C) Flow/Soldering Iron 25 1k ohm10% 100 PV36p202A01 0.5(70C) Flow/Soldering Iron 25 2k ohm10% 100 PV36p502A01 0.5(70C) Flow/Soldering Iron 25 5k ohm10% 100 PV36p103A01 0.5(70C) Flow/Soldering Iron 25 10k ohm10% 100 PV36p203A01 0.5(70C) Flow/Soldering Iron 25 20k ohm10% 100 PV36p253A01 0.5(70C) Flow/Soldering Iron 25 25k ohm10% 100 PV36p503A01 0.5(70C) Flow/Soldering Iron 25 50k ohm10% 100 PV36p104A01 0.5(70C) Flow/Soldering Iron 25 100k ohm10% 100 PV36p204A01 0.5(70C) Flow/Soldering Iron 25 200k ohm10% 100 PV36p254A01 0.5(70C) Flow/Soldering Iron 25 250k ohm10% 100 PV36p504A01 0.5(70C) Flow/Soldering Iron 25 500k ohm10% 100 PV36p105A01 0.5(70C) Flow/Soldering Iron 25 1M ohm10% 100 PV36p205A01 0.5(70C) Flow/Soldering Iron 25 2M ohm10% 100 PV36p100A31 0.5(70C) Flow/Soldering Iron 25 10 ohm10% 100 PV36p200A31 0.5(70C) Flow/Soldering Iron 25 20 ohm10% 100 PV36p500A31 0.5(70C) Flow/Soldering Iron 25 50 ohm10% 100 PV36p101A31 0.5(70C) Flow/Soldering Iron 25 100 ohm10% 100 PV36p201A31 0.5(70C) Flow/Soldering Iron 25 200 ohm10% 100 PV36p501A31 0.5(70C) Flow/Soldering Iron 25 500 ohm10% 100 PV36p102A31 0.5(70C) Flow/Soldering Iron 25 1k ohm10% 100 PV36p202A31 0.5(70C) Flow/Soldering Iron 25 2k ohm10% 100 PV36p502A31 0.5(70C) Flow/Soldering Iron 25 5k ohm10% 100 PV36p103A31 0.5(70C) Flow/Soldering Iron 25 10k ohm10% 100 PV36p203A31 0.5(70C) Flow/Soldering Iron 25 20k ohm10% 100 PV36p253A31 0.5(70C) Flow/Soldering Iron 25 25k ohm10% 100 PV36p503A31 0.5(70C) Flow/Soldering Iron 25 50k ohm10% 100 PV36p104A31 0.5(70C) Flow/Soldering Iron 25 100k ohm10% 100 PV36p204A31 0.5(70C) Flow/Soldering Iron 25 200k ohm10% 100 PV36p254A31 0.5(70C) Flow/Soldering Iron 25 250k ohm10% 100 PV36p504A31 0.5(70C) Flow/Soldering Iron 25 500k ohm10% 100 PV36p105A31 0.5(70C) Flow/Soldering Iron 25 1M ohm10% 100 PV36p205A31 0.5(70C) Flow/Soldering Iron 25 2M ohm10% 100 Part Number Remarks Non Standard Product (Cd included) Construction Adjustment Screw Terminal 8 Case Alumina Substrate Wiper Cermet Resistive Element Gear 69 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Mounting Holes PV36P 2.5 PV36W/X 2.5 (3) (1) (2) (1) 2.5 (3) (2) 2.5 Tolerance:0.1 in mm PV36Y/Z 2.5 2.5 (1) 2.5 (3) (2) Tolerance 0.1 in mm Characteristics Temperature Cycle Humidity Vibration (20G) Shock (100G) Temperature Load Life Low Temperature Exposure High Temperature Exposure 8 Rotational Life (200 cycles) TR 2% V.S.S. 1% TR 2% IR 100Mohm min. TR 1% V.S.S. 1% TR 1% V.S.S. 1% TR 3% V.S.S. 1% TR 2% V.S.S. 1% TR 3% V.S.S. 1% TR RV1kohm, RU500kohm ... 5% 1kohmFRF500kohm ... 3% TR V.S.S. IR R 70 : Total Resistance Change : Voltage Setting Stability : Insulation Resistance : Standard Total Resistance 2.5 Tolerance:0.1 in mm catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV12/PV37/PV23/PV22/PV36 Series Notice Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40 deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. If you use the trimmer potentiometer in an environment other than listed below, please consult with a Murata factory representative prior to using. The trimmer potentiometer should not be used under the following environmental conditions: (1) Corrosive gaseous atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Rating) 1. When using with partial load (rheostat), minimize the power depending on the resistance value. 2. The maximum input voltage to a trimmer potentiometer should not exceed (P.R)^1/2 or the maximum operating voltage, whichever is smaller. 3. The maximum input current to a trimmer potentiometer should not exceed (P/R)^1/2 or the allowable wiper current, whichever is smaller. Notice (Soldering and Mounting) 1. Soldering (1) Standard soldering condition (a) Flow soldering : >Pre-heating temp. 80-100 deg. C >Soldering temp. 260 deg. C max. >Soldering time 3 sec. max. (b) Soldering iron : >Temperature of tip 300 deg. C max. >Soldering time 3 sec. max. >Wattage of iron 40W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer potentiometer may deviate from the specified characteristics. (2) To minimize mechanical stress when adjusting, the trimmer potentiometer should be mounted onto PCB without gap. (3) The soldering iron should not come in contact with the case of the trimmer potentiometer. If such contact does occur, the trimmer potentiometer may be damaged. 2. Mounting (1) Use PCB hole to meet the pin of the trimmer potentiometer. If the trimmer potentiometer installs into insufficient PCB hole, the trimmer potentimeter may be damaged by mechanical stress. (2) Do not apply excessive force (preferably 9.8N (Ref.; 1kgf) max.), when the trimmer potentiometer is mounted to the PCB. 3. Cleaning (1) Isopropyl-alcohol and Ethyl-alcohol are applicable solvents for cleaning. If you use any other types of solvents, please consult with a Murata factory representative prior to using. (2) The total cleaning time by cold dipping, vapor and ultrasonic washing (conditions as below) method should be less than 3 minutes. (3) For ultra-sonic cleaning, the available condition is as follows. >Power: 600W (67 liter) max. >Frequency: 28kHz >Temperature: Ambient temperature Due to the ultra-sonic cleaning equipment's peculiar self-resonance point and that the cleaning compatibility usually depends on the jig construction and/or the cleaning condition such as the depth of immersion, please check the cleaning equipment to determine the suitable conditions. If the trimmer potentiometer is cleaned by other conditions, the trimmer potentiometer may be damaged. 8 71 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PV12/PV37/PV23/PV22/PV36 Series Notice Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. We recommend the screwdrivers below. * Recommended screwdriver for manual adjustment ENGINEER INC. : DA-40 (Murata P/N : KMDR180) We can supply the screwdrivers above. If you place order, please specify the Murata P/N. 2. Don't apply more than 9.8N (Ref.; 1kgf) of twist and stress after mounting onto PCB to prevent contact intermittence. If excessive force is Notice (Other) 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. Murata cannot guarantee trimmer potentiometer integrity when used under conditions other than those specified in this document. 8 72 applied, the trimmer potentiometer may not function. 3. When adjusting with an adjustment tool, the applied force to the adjustment screw should not exceed 4.9N (Ref.; 500gf). If excessive force is applied, the trimmer potentiometer may not function due to damage. 4. When using a lock paint to fix slot position, please use adhesive resin without chlorine or sulfur (Three-bond "1401 series"). R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Trimmer Potentiometers 5. #2 5 Features 0. R 1. C 2 2-R0.05rib #1 #2 #3 4.0 +0.1 -0 Dia. 2-1.00 +0.05 -0.10 Dia. 12.0 6.5 0.5 rib 1.50.1 (D formation thru-hole length) 0 1. Dust-proof construction protects the interior from dust, which maintains stable characteristics. 2. Compliant to high peak temperature lead free soldering. 3. Excellent resistance materials and high reliability wiper achieves 1M cycles. 4. D formation thru-hole rotor enables selection of any kind of gear shape. 5. Leaded terminal type is available. 6. Ultra-thin size (2.1mm height) 7. Au plated terminals without Lead. 0.6 C0.2 max. C0.15 max. 2.1 5.0 +0 -0.1Dia. 50 3.0 +0.1 -0 Angle Sensing Potentiometer SMD Dust-proof Type 12mm Size PVS1 Series 11.0 ia . 0.2 1.0 PVS1A 4.5 7.5 14.9 8.2 5.5 4- 1. 6 D 5.0 4-0.80.1 5.0 0.200.03 (in mm) (Tolerance: 0.3) 8.50.1 Applications 5. #2 3.0 +0.1 -0 Mounting Face 50 5 0.8 2.9 3.5 2 0. 0.2 1.0 3.0 7.5 5.0 4-1.6 Dia. 11.0 4-1.0 Dia. R C 1. 0 #1 #2 #3 2-R0.05rib 4.0 +0.1 -0 Dia. 6.9 0.5 rib 1.50.1 (D formation thru-hole length) 12.0 6.5 1. Animal robot 2. Switch for automotive 3. Motor drive unit 4. Radio control equipment 5. Electric motor-driven bicycle 5.4 2.0 PVS1L 4-0.80.2 2.5 2.5 5.0 (in mm) (Tolerance: 0.3) Part Number Total Resistance Value (k ohm) Linearity (%) Effective Rotational Angle TCR Rotational Life PVS1A103A01 (SV01A103AEA01) 10 30% 2 333.3 (Ref.) 500ppm/C 1M cycles PVS1L103A03 (SV01L103AEA11) 10 30% 2 333.3 (Ref.) 500ppm/C 1M cycles PVS1 series will be changed to new part number "SV01" since Oct. 1, 2004. Construction PVS1A PVS1L Rotor Rotor Cover Cover #2 Terminal #2 Terminal Resin Substrate #3 Terminal Resin Substrate #2 Terminal Resistive Element Wiper #1 Terminal 9 #3 Terminal #2 Terminal Resistive Element Wiper #1 Terminal Continued on the following page. 73 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Standard Land Pattern Standard Mounting Holes PVS1L .) PVS1A .8 (5 7.0 6.7 8.7 (1.1) (5.5) 5.5 5.2 7.2 D ia 4-1.0+0.1 -0 Dia. 2.5 4-1.8 5.0 (in mm) (Tolerance: 0.1) (8.5) Characteristics Temperature Cycle TR 20% (Thermal Shock) Linearity 3% TR 20% Linearity 3% TR 10% Linearity 3% TR 10% Linearity 3% TR 20% Linearity 3% High Temperature TR +5/-30% Exposure Linearity 3% Low Temperature TR 20% Exposure Linearity 3% Rotational Life TR 20% (1M cycles) Linearity 3% Humidity Vibration Shock (20G) Humidity Load Life TR: Total Resistance Change 9 74 2.5 5.0 (in mm) (Tolerance : 0.1) catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVS1 Series Notice Notice (Operating and Storage Conditions) 1. Store in temperatures of -10 to +40deg. C and relative humidity of 30-85%RH. 2. Do not store in or near corrosive gases. 3. Use within six months after delivery. 4. Open the package just before using. 5. Do not store under direct sunlight. 6. Do not use the rotary position sensor under the following environmental conditions. If you use the rotary position sensor in an environment other these listed below, please consult with Murata factory representative prior to using. (1) Corrosive gasses atmosphere (Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (Ex. Water, Oil, Medical liquid, Organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Soldering and Mounting)-PVS1A Type 1. Soldering (1) PVS1A series can be soldered by reflow soldering method and soldering iron. Do not use flow soldering method (dipping). (2) The dimension of land pattern used should be Murata's standard land pattern at reflow soldering. Excessive land area may cause displacement due to the effect of the surface tension of the solder. Insufficient land area may cause insufficient soldering strength on PCB. (3) Standard soldering condition (a) Reflow soldering : Refer to the standard temperature profile. (b) Soldering iron: >Temperature of tip 360 deg. C max. >Soldering time 3 sec. max./1 terminal >Diameter 3mm max. >Wattage of iron 30W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the rotary position sensor may deviate from the specified characteristics. (4) The amount of solder is critical. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals. (5) The soldering iron should not come in contact with the cover of the rotary position sensor. If such contact does occur, the rotary position sensor may be damaged. 2. Mounting (1) Do not apply excessive force (preferable 9.8N (Ref.; 1kgf) max.), when the rotary position sensor is mounted to the PCB. (2) Do not warp and/or bend PCB to prevent the rotary position sensor from breakage. 3. Cleaning Cannot be cleaned because of open construction. Notice (Soldering and Mounting)-PVS1L Type 1. Soldering (1) PVS1L series can be soldered by flow soldering method and soldering iron. Do not use reflow soldering method. (2) Standard soldering condition (a) Flow soldering >Pre-haeting temp.: 80-100 deg. C >Soldering temp. : 260 deg. C max. >Soldering time : 3 sec. max. (b) Soldering iron >Temperature of tip: 360 deg. C max. >Soldering time : 3 sec. max./1 terminal >Diameter : 3mm max. >Wattage of iron : 30W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the rotary position sensor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The soldering iron should not come in contact with the cover of the rotary position sensor. If such contact does occur, the rotary position sensor may be damaged. 2. Mounting (1) Use PCB hole to meet the pin of the rotary position sensor. If the rotary position sensor is installed into insufficient PCB hole, the rotary position sensor may be damaged by mechanical stress. (2) Do not apply excessive force (preferably 9.8N (Ref.; 1kgf) max.), when the rotary position 9 Continued on the following page. 75 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. PVS1 Series Notice Continued from the preceding page. sensor is mounted to the PCB. 3. Cleaning Cannot be cleaned because of open construction. Reflow Soldering Standard Profile Pre-heating in air Soldering Gradual cooling in air 260 Temperature (C) 230 200 150 100 0 60-120 sec. 40 sec. max. Time (Melting zone) Notice (Handling) Uncontrolled mechanical force except usual rotation on the hollow rotor of product, may cause big change of electrical characteristic, big increase of rotational torque or mechanical damage of product. Therefore, please pay your attention on the following points for your design. 1. The fixing method of product must be soldering by the terminals of product. And please don't fix by screw cramping of supporting board which might cause mechanical deformation of product. 2. Your connecting shaft must be sustained by your bearing and any uncontrolled force should not apply on the hollow rotor of product. Notice (Other) 1. Please make sure the connecting impedance is not to be less than 10M ohm. The rotary position sensor is designed to connect the output terminal and A/D port of the microprocessor directly. Therefore, connecting impedance presupposes certain M ohm and the contact resistance is set high. 2. To minimize the processing error and noise influence which occur in rare cases, when data is installed through the product, please note the following items and program your software. (1) Data install should be done plural times and 9 76 applied the mean value. (2) Data considered as error should be invalid. (3) If suspicious data is found, the data should be re-installed. 3. Before using rotary position sensor, please test after assembly in your particular mass production system. 4. MURATA cannot guarantee rotary position sensor integrity when used under conditions other than those specified in this document. R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. SMD Open Type and and SMD Type PVM4A_C01 Series Specifications and Test Methods Specifications TestSealed Methods The tests and measurements should be conducted under the condition of 15 to 35C of temperature, 25 to 75% of relative humidity and 86 to 106 kpa of atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above mentioned conditions, the tests and measurements should be conducted under the condition of 252C of temperature and, 45 to 55% of relative humidity and 86 to 106 kpa of atmospheric pressure. No. Item Test Methods Measure total resistance between the resistance element and terminals (terminals #1 and #3) with the contact arm positioned against a stop. The positioning of the contact arm and terminal should be the same for subsequent total resistance measurements on the same device. Use the test voltage specified in Table-1 for total resistance measurements. This voltage should be used whenever a subsequent total resistance measurement is made. 1 Total Resistance Total Resistance, Nominal (ohm) 10VRV100 100FRV1k 1kFRV10k 10kFRV100k 100kFR Maximum Test Voltage (V) 1.0 3.0 10.0 30.0 100.0 Table 1: Total resistance test voltage 2 Residual Resistance Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clockwise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end terminal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not exceeded. Contact resistance variation should be measured with the measuring circuit shown below, or its equivalent. The operating wiper should be rotated in both directions through 90% of the actual effective-electrical travel for a total of 6 cycles. The rate of rotation of the operating wiper should be such that the wiper completes 1 count in determining whether or not a contact resistance variation is observed at least twice in the same location. The test current should follow the value given in Table-2 unless otherwise limited by the power rating. 3 Contact Resistance Standard Total Resistance R (ohm) 100VRF10k 10kVRF100k 100kVR Test Current 10mA max. 1mA max. 100A max. Table 2: Test current for CRV #1 Constant Current Source (Test current shown in Table 2) Rx Oscilloscope #3 #2 Proofread Resistence AC Amplifier Rx : Trimmer Potentiometer Oscilloscope bandwidth :100Hz to 50kHz Figure 1: CRV measuring circuit 4 Humidity Exposure The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the potentiometer should be placed in a chamber at 402C and 90 - 95% without loading for 50012 hours. The resistance value should be measured after keeping the potentiometer in a room for 51/6 hours. 5 High Temperature Exposure The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the potentiometer should be placed in a chamber at 702C without loading for 50012 hours. The resistance value should be measured after keeping the potentiometer in a room for 1.51/6 hours. 6 Humidity Load Life The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the potentiometer should be placed in a chamber at 402C and 90 - 95% with loading the 1/2 rated voltage between #1 and #2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 100012hours. The resistance value should be measured after keeping the potentiometer in a room for 51/6 hours. Load Life The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the potentiometer should be placed in a chamber at 702C (502C for PVZ) with loading the 1/2 rated voltage between #1 and #2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 100012 hours. The resistance value should be measured after keeping the potentiometer in a room for 1.51/6 hours. 7 The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the potentiometer should be subjected to Table 3,Table 4 temperature for 5 cycles. The resistance value should be measured after keeping the potentiometer in a room for 1.510 minutes. 8 Temperature Cycle Sequence Temp. (C) Time (min.) 2 1 3 4 -253 +252 +853 +252 303 10max. 303 10max. Table 3: PVZ Sequence Temp. (C) Time (min.) 2 1 3 4 -553 +252 +1253 +252 303 10max. 303 10max. Table 4: PVA3/PVS3/PVM4A---C01 9 Continued on the following page. 1 77 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. SMD Open Type and Type PVM4A_C01 Series Specifications and Test Methods Specifications andSMD TestSealed Methods Continued from the preceding page. No. Item Test Methods The trimmer potentiometer should be subjected to each of the following temperatures (see Table 5, Table 6) for 30 to 45 minutes. The resistance value should be measured in the chamber. R2 - R1 TCR= R1 (T2 - T1) Z 106 (ppm/C) 9 Temperature Coefficient of Resistance T1 T2 R1 R2 : Reference temperature in degrees celsius : Test temperature in degrees celsius : Resistance at reference temperature in ohm : Resistance at test temperature in ohm Sequence 1* Temp. (C) +252 Note*: Norm temp. 2 -253 3* +252 4 +853 Sequence Temp. (C) 1 +252 2 -553 3* 4 +252 +1253 Table 6: PVA3/PVS3/PVM4A---C01 Table 5: PVZ 10 9 78 Rotational Life The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per minute, for 10 cycles continuously. The resistance value should be measured after keeping the potentiometer in a room for 105 minutes. R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. SMD Sealed Type/Lead Sealed Type Specifications and Test Methods Specifications and Test Methods The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (Military specification for variable resistors, non-wirewound) and MIL-STD-202 (Test methods for electronic and electrical component parts). No. Item Test Methods Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned against a stop. The positioning of the contact arm and terminal should be the same for subsequent total resistance measurements on the same device. Use the test voltage specified in Table 1 for total resistance measurements. This voltage should be used for all subsequent total resistance measurements. 1 Total Resistance Total Resistance, Nominal (ohm) 10VRV100 100FRV1k 1kFRV10k 10kFRV100k 100kFR Maximum Test Voltage (V) 1.0 3.0 10.0 30.0 100.0 Table 1: Total resistance test voltage 2 Residual Resistance Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clockwise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end terminal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not exceeded. Contact resistance variation should be measured with the measuring circuit shown in Figure 1, or its equivalent. The adjustment rotor (screw) should be rotated in both directions through 90% of the actual effective-electrical rotational angle (number of turns) for a total of 6 cycles. Only the last 3 cycles should count in determining whether or not a contact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the adjustment rotor (screw) should be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum to 2 minutes maximum. The test current used should follow the value given in Table 2 unless otherwise limited by power rating. 3 Contact Resistance Variation Standard Total Resistance R (ohm) RV100 100FRF500 500VRF1k 1kVRF2k 2kVRF50k 50kVRF200k 200kVRF1M 1MVRF2M 2MVR Test Current 20mA 10mA 4mA 2mA 1mA 200A 100A 50A 30A Rx #1 Oscilloscope #3 #2 Constant Current Source (Test current shown in Table2) Proofread Resistance AC Amplifier Rx : Trimmer Potentiometer Oscilloscope bandwidth :100Hz to 50kHz Figure 1: CRV measuring circuit Table 2: Test current for CRV The trimmer potentiometer should be subjected to each of the following temperatures (see Table 3) for 30-45 minutes. Temperature coefficient of resistance should be applied to the following formula. R2 - R1 TCR= R1 (T2 - T1) Z 106 (ppm/C) 4 Temperature Coefficient of Resistance T1 T2 R1 R2 : Reference temperature in degrees celsius : Test temperature in degrees celsius : Resistance at reference temperature ohm : Resistance at test temperature in ohm Sequence 1* 2 Temperature (C) +25 -15 3 Min. operating Temperature 4* 5 +25 +65 6 Max. operating Temperature Note*: Reference temperature Table 3: Test temperatures The wiper should be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An adequate DC test potential should be applied between terminal #1 and terminal #3. The voltage between terminal #1 and terminal #3, and the voltage between terminal #1 and terminal #2, should be measured and applied to the following formula. E 5 Voltage Setting Stability Voltage setting stability= 9 ( e'E - Ee ) Z100 (%) e : Before test (The voltage between terminal #1 and terminal #2) e': After test (The voltage between terminal #1 and terminal #2) E : The voltage between terminal #1 and terminal #3 #1 #3 #2 e Figure 2 Continued on the following page. 1 79 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. SMD Sealed Type/Lead Type Specifications and Test Methods Specifications and TestSealed Methods Continued from the preceding page. No. Item Test Methods The trimmer potentiometer should be subjected to Table 4 temperature for 5 cycles. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1~2 hours. 6 Temperature Cycle 1 Sequence PV-- series Temp. -553 PV22 series (C) PVF2 series -253 Time (min.) 30 2 3 4 +1253 +252 +1503 +252 +603 30 5 max. 5 max. Table 4: One cycle of temperature cycle. 1) PVC6, PV12, PV32, PV34 PVM4A---D01 series The trimmer potentiometer should be placed in a chamber at a temperature of 402C and a humidity of 90~95% without loading for 2508 hours (50012 hours for PVM4A---D01 series). The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 51/6 hours. 2) PVF2 series The trimmer potentiometer should be placed in a chamber at 602C and 90~95% without loading for 100012 hours. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 51/6 hours 2) PVG3, PVG5, PV01, PV22, PV23, PV36, PV37 series The trimmer potentiometer should be subjected Figure-3 the programmed humidity environment for 10 cycle. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1.51/2 hours. MIL-STD-202 METHOD 106 80-98%RH 70 65 60 55 Humidity 45 40 90-98%RH 90-98%RH 24 HOURS RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED. HOWEVER, SPECIMENS SHOULD NOT BE SUBJECTED TO RADIANT HEAT FROM CHAMBER-CONDITIONING PROCESSES 50 TEMPERATURE (DEGREES CELSIUS) 7 80-98%RH 90-98%RH INITIAL CONDITIONING IN A DRY OVEN HUMIDITY UNCONTROLLED 35 30 +10C -2C CIRCULATION OF CONDITIONING AIR SHOULD BE AT A MINIMUM CUBIC RATE PER MINUTE EQUIVALENT TO 5 TIMES THE VOLUME OF THE CHAMBER 25 20 15 INITIAL MEASUREMENTS AS SPECIFIED IN 3.2 10 5 0 -5 -10 END OF FINAL CYCLE MEASUREMENTS AS SPECIFIED IN 3.6 VOLTAGE APPLIED AS SPECIFIED IN 3.5 UNLESS OTHERWISE SPECIFIED TEMPERATURE TOLERANCE IS, 2C AT ALL POINTS WITHIN THE CHAMBER EXCEPT THE IMMEDIATE VICINITY OF THE SPECIMENS AND THE CHAMBER SURFACES PRIOR TO FIRST CYCLE STEP 1 UNLESS OTHERWISE SPECIFIED STEPS 7a AND 7b PERFORMED DURING ANY 5 OF THE FIRST 9 CYCLES. HUMIDITY UNCONTROLLED DURING STEPS 7a AND 7b ONLY STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7b STEP 7a STEP 7 ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Figure 3 Vibration 1) PV-- series The trimmer potentiometer should be vibrated throughout the frequency range at the 20G level. A complete frequency range, 10Hz to 2000Hz and back, should be made within 15 minutes for a total of 4 sweeps in each of the three axis direction for a total of 12 sweeps. 2) PVF2 series The trimmer potentiometer should be subjected to vibration at 0.3 inch amplitude. The frequency should be varied uniformly between the approximate limits of 10Hz and 55Hz. This motion should be applied for period of 2 hours in each of 3 mutually perpendicular directions (total of 6 hours). 9 Shock 1) PV-- series The trimmer potentiometer should be shocked at the 100G (50G for PV22 and PV23 series) level and should be subjected to 4 shocks in each of the three axis directions for a total of 12 shocks. 2) PVM4A---D01 series The trimmer potentiometer should be shocked at the 100G level and should be subjected to 3 shocks in each of the six axis directions for a total of 18 shocks. 10 Temperature Road Life Full rated continuous working voltage not exceeding the maximum rated voltage should be applied intermittently between terminal #1 and terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total of 100012 hours, at a temperature of 702C (852C for PV01 and PV37 series, 502C for PVF2 series). The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1 to 2 hours. 11 High Temperature Exposure (Except for PVF2) The trimmer potentiometer should be placed in a chamber at a temperature of 1253C (1503C for PV22 series) 2508 hours without loading. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1 to 2 hours. 12 Low Temperature Exposure (Except for PVF2 and PVM4A---D01) The trimmer potentiometer should be placed in a chamber at a temperature of -553C for 1 hours without loading. Full rated continuous working voltage not exceeding the maximum rated voltage should be applied for 45 minutes. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for approximately 24 hours. 8 9 Continued on the following page. 80 1 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. SMD Sealed Type/Lead Sealed Type Specifications and Test Methods Specifications and Test Methods Continued from the preceding page. No. 13 Item Low Temperature Operation (Only for PVF2 and PVM4A---D01) Test Methods The trimmer potentiometer should be placed in a chamber at a temperature of -253C (-553C for PVM4A--D01 series) 484 hours without loading. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 255C for 1-2 hours 1)PV-- series Full rated continuous working voltage not exceeding the maximum rated voltage should be applied with the circuit shown in the figure. The adjustment rotor (screw) should be continuously cycled through not less than 90% of effective-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for total of 200 cycles. End Terminal Resistor 1 End Terminal 14 End Terminal Resistor 2 End Terminal Rotational Life DC supply Figure 4 2) PVG3, PVG5 series The adjustment rotor (screw) should be continuously cycled though not less than 90% of effective-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total of 50 (100 for PVG5) cycles, without loading. 3) PVF2, PVM4A---D01 series The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per minute, for 100 cycles continuously. 9 81 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Angle Sensing Potentiometer Specifications and Test Methods No. Test Methods Item Independent linearity should vary no more than 2% within 160 to 50% voltage ratio. Taper : linear, 100%/333.3 Measured with the circuit as below (Figure 1). 100% Guarantee limit for linearity DC5V (#3) GND (#1) Output voltage ratio (%) 1 V (1-2) X100 V (1-3) Linearity 50% Connection Impedance : 1M ohm min. 100% / 333.3 Output (#2) 0% -160 CCW 0 CW +160 Figure-1 Rotational angle () The rotary position sensor should be subjected to each of the following temperatures (see Table 1) for 30-45 minutes. Temperature coefficient of resistance should be applied to the following formula. TCR= 2 Temperature Coefficient of Resistance R2 - R1 R1 (t2 - t1) Z 106 (ppm/C) t1 : Reference temperature in degrees celsius t2 : Test temperature in degrees celsius R1 : Resistance at reference temperature in ohm R2 : Resistance at test temperature in ohm 2 Sequence *1 -40 Temperature (C) +25 Note * : Reference temperature *3 +25 4 +85 Table-1 Test temperatures The rotary position sensor should be subjected to Table 2 temperature for 5 cycles. Then, the rotary position sensor should be kept in the dry box for 24 +8/-0 hrs. 3 Temperature Cycle (Thermal Shock) Sequence Temperature (C) Time (min.) 1 -403 30 2 +252 5 max. 3 +853 30 4 +252 5 max. Table 2: One cycle of temperature cycle 4 Humidity The rotary position sensor should be stored in a chamber at temperature of +602C and relative Humidity of 90-95% for 2508 hrs. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours. 5 Vibration The rotary position sensor should be tested under the condition of the amplitude of 1.5mm, the frequency range from 10 to 55Hz (should be traversed in approximately one minute) and 2 hours in each of 3 mutually perpendicular directions (total 6 hours). Then, the rotary position sensor should be kept in the dry box for 1-2 hrs. 6 Shock The rotary position sensor should be tested under the condition of the peak acceleration 20G max. in half-sine wave and 5 shocks in each of 3 mutually perpendicular directions (total 15 shocks). Then, the rotary position sensor should be kept in the dry box for 1-2 hrs. 7 Humidity Load Life Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of the rotary position sensor, 1.5 hours on and 0.5 hours off, for 964 hours in total in a chamber at a temperature of +402C and relative humidity of 90-95%. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/0 hours. 8 High Temp. Exposure The rotary position sensor should be stored in a chamber at the temperature of +853C without loading for 2508 hours. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours. 9 Low Temp. Exposure The rotary position sensor should be stored in a chamber at the temperature of -403C without loading for 1684 hours. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours. 10 Rotational Life The adjustment rotor should be continuously rotated within 160 of effective electrical rotational angle, at the rate of one cycle for 6 seconds for 1 Million cycles under the condition of +252C of temperature without loading. 9 82 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Minimum Quantity Part Number Minimum Quantity (pcs.) Bulk Tray -- 1000 -- -- 1000 -- -- -- 1000 -- -- -- -- 1000 -- PVS3 2500 8000 -- -- 500 -- PVA3 2000 8000 -- -- 500 -- PVG3A/G 1000 -- -- -- 500 -- PVG3K 500 -- -- -- -- -- PVM4 500 3000 -- -- 500 -- PVF2A 500 -- -- -- 100 -- PVG5A 250 -- -- -- 50 -- PVG5H 500 -- -- -- 50 -- PV01W -- -- -- 50 -- -- PV01P -- -- -- 50 -- -- PV01X -- -- -- 50 -- -- PVC6A/D/G/H/E -- -- -- 50 50 -- PVC6M/Q -- -- 1000 50 50 -- PV34 -- -- -- -- 100 -- PV32 -- -- -- -- 100 -- PV23/12 -- -- -- -- 50 -- 30 -- o180mm reel o330mm reel Ammo Pack Magazine PVZ2A 3000 12000 -- PVZ2K 3000 -- -- PVZ3A 2000 8000 PVZ3K/R 1500 PV22 -- -- -- -- PV36W -- -- 1000 50 50 -- PV36Y -- -- -- 50 50 -- PV36X -- -- 1000 40 50 -- PV36Z/P -- -- -- 40 50 -- PV37Y/Z -- -- 1000 -- 50 -- PV37W/X/P -- -- -- -- 50 -- PVS1A -- 1000 -- -- 50 -- PVS1L -- -- -- -- -- 1000 Dimensions of Reel 50 dia.min. 13.00.5 dia. 21.00.8 dia. 2.00.5 1782 dia. * 2.00.5 (PVG5A--1.00.5) * 10.01.5 ( 8mm Width) -- PVZ2A, PVZ3A, PVS3, PVA3, PVF2 14.01.5 (12mm Width) -- PVG5H, PVG3, PVZ2K, PVZ3K, PVZ3R, PVM4 17.01.5 (16mm Width) -- PVG5A 9 (in mm) Continued on the following page. 83 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Dimensions of Reel PVS1 80 min. 13.00.5 Dia. 2.00.5 21.00.8 Dia. 2.00.5 25.51.0 3282 Dia. (in mm) Dimensions of Plastic Tape PVZ2 / PVZ3 / PVA3 / PVS3 / PVF2 2.00.1 4.00.1 a 1.5 +0.1 -0 dia. 4.00.1 I J 1.750.1 D C B A a' Across a - a' Tape feeding direction Part Number B C D 3.10.1 8.00.2 3.50.1 PVZ2K 5.70.1 12.00.1 5.50.1 PVZ3A/PVA3 3.80.2 8.00.2 3.50.1 PVZ3K 5.80.2 PVZ2A A 2.40.1 3.30.2 PVZ3R 4.10.2 PVS3 PVF2 6.50.2 2.30.2 2.30.2 12.00.2 5.50.1 8.00.2 3.50.1 J I 1.10.1 1.950.1 2.30.1 2.10.1 0.20.1 0.30.1 0.20.1 0.30.1 1.60.1 0.20.1 2.30.1 0.30.1 * The side containing terminals #1 and #3 faces the plastic tape pilot holes. (in mm) Continued on the following page. 9 84 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Dimensions of Plastic Tape 5.50.1 4.00.1 1.5 +0.1 -0 dia. a B I J 12.00.2 2.00.1 8.00.1 1.750.1 PVG3A / PVG3G / PVM4 / PVG5H Across a - a' a' A Tape feeding direction Part Number PVG3A PVG3G A I J 2.10.1 0.30.1 B 4.00.1 4.00.1 4.90.1 PVM4 4.50.2 5.50.2 2.150.1 0.30.1 PVG5H 5.40.2 5.80.2 4.00.1 0.40.1 * The side containing terminals #1 and #3 faces the plastic tape pilot holes (except PVG3). (in mm) PVG5A 7.50.1 B I J 16.00.3 4.00.1 1.5 +0.1 -0 dia. a 1.750.1 2.00.1 12.00.2 Across a - a' a' A Tape feeding direction Part Number PVG5A A B I J 4.30.2 5.40.2 5.40.1 0.40.1 (in mm) Continued on the following page. 9 85 R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Dimensions of Plastic Tape PVG3K PVS1 1.75 1.5 +0.1 -0 Dia. 11.5 6.20.1 16.3 12.00.2 a 2.00.05 a 0.30.1 a' 8.00.1 0.40.05 24.0 +0.1 1.5 -0 dia. 2.00.1 4.0 2.80.1 5.50.1 1.750.10 3.5 4.00.1 Across a-a' 11.4 4.00.1 a' Across a-a' 16.0 Tape feeding direction (in mm) (Tolerance: 0.1) Tape feeding direction (in mm) Dimensions of Radial Taping PVC6M PVC6Q 0.55Wx3.2Lx1.3D 0.55Wx3.2Lx1.3D 6.9 6.9 12.71.0 02 3.2 Dia. #2 A' Across B-B' #1 #2 #3 #1 #2 #3 2.50.5 2.50.5 6.350.70 Across A-A' 4.00.1 Dia. 12.70.3 Across A-A' 6.350.70 mm (Tolerancein: 0.3 ) mm (Tolerance in: 0.3 ) 4.00.1 Dia. PV37Y PV37Z 12.71.0 12.71.0 4.00.1 Dia. 6.350.70 2.0 Across B-B' Across A-A' 6.7 A A' #3 #2 #1 2.5 2.5 4.00.1 Dia. mm (Tolerance in: 0.3 ) 12.70.3 2.50.5 2.50.5 4.0 2.50.5 2.50.5 B' 6.350.70 12.70.3 0.70.2 4.0 2.5 2.5 B 02.0 +1.0 18.5 - 0.5 A' #3 #2 #1 6.0min A 3-0.40.1 Dia 2.0 B' 18.00.5 9.00.5 B 6.4 02.0 +1.0 18.5 - 0.5 6.0min 18.00.5 9.00.5 3-0.40.1 Dia 6.7 6.4 Across B-B' Across A-A' 0.70.2 12.70.3 3.25 +1.0 A mm (Tolerancein: 0.3 ) Continued on the following page. 9 86 0.70.2 2.50.5 2.50.5 A' B' 18.5 - 0.5 2.5 Across B-B' B 3-0.5 Dia. 6.0min. 2.5 0.70.2 A #1 9.00.5 +1.0 18.5 - 0.5 B' 6.0min. 18.00.5 9.00.5 B #3 18.00.5 5.2 02 3-0.5 Dia. 8.0 6.9 12.71.0 3.2 Dia. R50E13.pdf 04.6.11 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. Dimensions of Radial Taping PV36W PV36X 12.71.0 9.6 12.71.0 9.6 02.0 #3 #2 #1 A 4.00.1 Dia. 0.70.2 2.50.5 2.50.5 4.00.1 Dia. 6.350.70 12.70.3 2.5 2.5 A' #3 #2 #1 2.5 2.5 12.70.3 2.50.5 2.50.5 0.70.2 6.350.70 6.0min 18.00.5 9.00.5 A' B' +1.0 +1.0 A B 18.5 - 0.5 3-0.50.1 Dia B' 18.5 - 0.5 B 6.0min 18.00.5 9.00.5 3-0.50.1 Dia 10.0 10.0 02.0 mm (Tolerancein: 0.3 ) 2.5 Across B-B' Across B-B' 2.5 Across A-A' mm (Tolerancein: 0.3 ) Across A-A' Dimensions of Ammo Pack 305 max. 3T 1T 46 ax. ax m 330 m . (in mm) Dimensions of Magazine Packaging PV01 PVC6 +0 PV36P 508 21.10.5 +0 -1.0 +0 11.50.5 508 -1.0 18.00.5 PV36W/Y/X/Z 7.30.5 +0 370 -1.0 9.00.5 15.30.5 9.80.5 18.80.5 413 -1.0 9 (in mm) 87 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please R50E13.pdf 04.6.11 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Recommended Adjustment Tools/Qualified Standards Recommended Adjustment Tools Trimmer Potentiometer Series Manufacturers Model Number MURATA Model Number Blade PVZ2 MURATA MFG. KMDR090 KMDR090 - Minus (round edge) PVZ2A_A04 VESSEL MFG. No.9000+0Z30 KMDR150 + Cross VESSEL MFG. No.9000+1.7Z30 KMDR080 + Cross SA-2225 KMDR070 - Minus (round edge) PVZ3 PVA3 TORAY INDUSTRIES, INC. VESSEL MFG. No.9000+1.7Z30 KMDR080 + Cross TORAY INDUSTRIES, INC. SA-2225 KMDR070 - Minus (round edge) PVS3 TORAY INDUSTRIES, INC. SA-2225 KMDR070 - Minus (round edge) PVG3 TORAY INDUSTRIES, INC. SA-2225 KMDR070 - Minus (round edge) PVM4 VESSEL MFG. No.9000-2.6Z30 KMDR120 - Minus VESSEL MFG. No.9000-1.3Z30 KMDR130 - Minus PVG5 PVC6 ENGINEER INC. VESSEL MFG. TORAY INDUSTRIES, INC. VESSEL MFG. others ENGINEER INC. - Minus DA-54 No.9000+0Z30 KMDR150 + Cross SA-2225 KMDR070 - Minus (round edge) No.9000-1.8Z30 KMDR110 - Minus DA-40 KMDR180 - Minus (both ends) DA-55 - Minus For Automatic Adjustment Trimmer Potentiometer Series Manufacturers Model Number MURATA Model Number Blade PVZ3 PVA3 PVS3 PVG3 TORAY INDUSTRIES, INC. JB-2225 KMBT070 - Minus (round edge) PVC6 VESSEL MFG. TORAY INDUSTRIES, INC. No.CA-10 KMBT090 + Cross JB-2225 KMBT070 - Minus (round edge) Qualified Standards The products listed here have been produced by the QS9000 and ISO9001 certified factory. MURATA FACTORY Qualified Date Standard Qualified Number Sabae Murata Mfg.Co.,Ltd. August 14, 1997 UNDERWRITERS LABORATORIES INC. A5704 Wuxi Murata Electronis Co.,Ltd. May 12, 1999 UNDERWRITERS LABORATORIES INC. A7924 No ODCs (Ozone Depleting Chemicals) are used on all Murata's trimmer potentiometers. 9 88 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. R50E13.pdf 04.6.11 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of April 2004. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp