Verpackt in Tray Verpackungseinheit 36 St. 18 0,6 5 x 18 = 90 max. 138 3,7 3,2 5,6 5,8 +0,3 tray packaging packaging unit 36 pcs Leiterplatte pcb +0,2 39,3 -0,4 25,1 +0,2 46,2 5 x 46,2 = 231 max. 325 8,25 +0,2 Sonstige Angaben siehe Zeichnung 204628 / Additional indications according to drawing 204628 Layoutvorschlag: 33,3 0,1 recommended layout: 7 x 2,74 = 19,18 A ohne / without Mutter / nut Bolzen / bolt thread depth max. 3,5 mm thread depth max. 5,5 mm +0,09 1 -0,06 max. Einschraubtiefe 5,5 mm max. Einschraubtiefe 3,5 mm 3,7 Gewinde / thread M3 / #4-40 0,05 3,1 -0,06 6,4 2,74 Pin 1 B +0,04 Gewinde / thread M3 / #4-40 0,05 (15x) 2,84 12,6 0,3 Pin 1 1,37 B 2,74 6 x 2,74 = 16,44 33,3 0,05 Beschriftung nach Bedruckungsvorschrift 174538 234183 #4-40 234184 Anschlussbereich verzinnt terminal area tin plating Anforderungsstufe: 2 Fehlende Masse und Angaben siehe DIN 41652 / Missing information and dimensions according to DIN 41652 Sonstige Angaben siehe Fertigungsunterlagen / Additional indications according to the production documentation X M3 234185 #4-40 234186 M3 class: 2 Ident.-Nr. part-no. ohne without Mutter thread Bolzen bolt Bemerkung remark Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 234182 A Lochaufbau siehe ERNI-Spezifikation 164062 / hole design according to ERNI-specification 164062 Part marking according to specification 174538 M 1:1 0,05 Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. TMC-P 15-EE-3,7-5,6-BA8 TMC-P 15-EE-3,7-5,6-type 8 224830 www.ERNI.com A 25.02.2010 Index Date Class TMCP I A3