SS1003EJ Ordering number : EN8157A SANYO Semiconductors DATA SHEET SS1003EJ Schottky Barrier Diode 30V, 1A Rectifier Applications * High frequency rectification (switching regulators, converters, choppers). Features * * * Low switching noise. Low forward voltage (IF=500mA, VF max=0.39V) (IF=1A, VF max=0.45V). Ultraminiature (1608 size) and thin (0.6mm) leadless package. Specifications Absolute Maximum Ratings at Ta=25C Parameter Repetitive Peak Reverse Voltage Symbol Conditions Ratings Unit VRRM VRSM 30 V 35 V Average Output Current IO 1 A Surge Forward Current IFSM 5 A Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle Junction Temperature Tj --55 to +125 C Storage Temperature Tstg --55 to +125 C Electrical Characteristics at Ta=25C Parameter Reverse Voltage Forward Voltage Symbol VR VF1 IR=500A IF=500mA VF2 IF=1A Reverse Current IR Interterminal Capacitance C Reverse Recovery Time Thermal Resistance Conditions trr Rth(j-a) Ratings min typ max 30 VR=15V VR=10V, f=1MHz V 0.39 V 0.45 V 360 A 27 IF=IR=10mA, See specified Test Circuit. Mounted on a ceramic board (600mm20.8mm) Unit pF 10 165 ns C / W Marking : DH Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O1806 SY IM TC-00000252 / N3004 TS IM TB-00000946 No.8157-1/3 SS1003EJ Package Dimensions unit : mm (typ) 7033A-001 Top View 0.8 3 1 2 1.6 4 0.025 0.6 Polarity Discriminating Mark 0.5 0.2 2 1.2 0.3 1 3 SANYO : ECSP1608-4 Bottom View Type No. Indication (Top view) Electrical Connection (Top view) trr Test Circuit Cathode mark (Top) DH Anode Cathode 50 100 10 10s *Electrodes : on the bottom 1mA 10mA Duty10% 10mA 4 1 : Cathode 2 : Cathode 3 : Anode 4 : Anode --5V trr Cathode mark (Top) Anode Cathode IF -- VF Reverse Current, IR -- A 50 C 75 C --2 5C C C 10 0 0.001 0 0.1 C Ta=125 10000 7 5 3 2 25 0.01 7 5 3 2 25 0.1 7 5 3 2 IR -- VR 3 2 C 1.0 7 5 3 2 Ta =1 Forward Current, IF -- A 10 7 5 3 2 0.2 0.3 Forward Voltage, VF -- V 0.4 0.5 IT07939 100C 75C 1000 7 5 3 2 50C 25C 100 7 5 3 2 --25C 10 7 5 3 2 1.0 0 10 20 Reverse Voltage, VR -- V 30 40 IT07940 No.8157-2/3 0.6 0.5 PF(AV) -- IO (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 (1) (2) (4) (3) Rectangular wave 0.2 (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 120 0.4 0.3 Tc -- IO 140 Case Temperature, Tc -- C Average Forward Power Dissipation, PF(AV) -- W SS1003EJ 360 Sine wave 0.1 100 80 60 40 20 360 1.0 0 0 0.2 0.4 0.6 0.8 Average Output Current, IO -- A (2) (4) (3) (1) 180 0 1.2 IT08214 0 0.2 0.4 0.6 0.8 1.0 Average Output Current, IO -- A 1.2 IT08215 C -- VR 3 f=1MHz Interterminal Capacitance, C -- pF 2 100 7 5 3 2 10 0.1 2 3 5 7 1.0 2 3 5 7 10 Reverse Voltage, VR -- V 2 3 5 7 100 IT07943 Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2006. Specifications and information herein are subject to change without notice. PS No.8157-3/3