TABLE 4 GROUP A INSPECTION PA07M M I C R O T E C H N O L O G Y HTTP://WWW.APEXMICROTECH.COM SG PARAMETER SYMBOL TEMP. POWER (800) 546-APEX TEST CONDITIONS (800) 546-2739 MIN MAX UNITS 1 1 1 1 1 1 1 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS 25C 25C 25C 25C 25C 25C 25C 35V 35V 12V 50V 35V 35V 35V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 30 2 4.3 3.5 50 50 50 mA mV mV mV pA pA pA 3 3 3 3 3 3 3 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input BiasCurrent, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS -55C -55C -55C -55C -55C -55C -55C 35V 35V 12V 50V 35V 35V 35V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 46 4.4 6.7 5.9 50 50 50 mA mV mV mV pA pA pA 2 2 2 2 2 2 2 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS 125C 125C 125C 125C 125C 125C 125C 35V 35V 12V 50V 35V 35V 35V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 30 5 7.3 6.5 10 10 10 mA mV mV mV nA nA nA 4 4 4 4 4 4 4 4 Output Voltage, IO = 5A Output Voltage, IO = 90mA Output Voltage, IO = 2A Current Limits Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO ICL EN SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 15.3V 50V 29V 19V 35V 35V 35V 34.5V RL = 2.07 RL = 500 RL = 12 RL = 12, RCL= 1 RL = 100, AV = 1, CL = 10nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 24.5V 10.3 45 24 .54 6 6 6 6 6 6 6 Output Voltage, IO = 5A Output Voltage, IO = 90mA Output Voltage, IO = 2A Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C -55C 15.3V 50V 29V 35V 35V 35V 34.5V RL = 2.07 RL = 500 RL = 12 RL = 100, AV = 1, CL = 10nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 24.5V 10.3 45 24 5 5 5 5 5 5 5 Output Voltage, IO = 3A Output Voltage, IO = 90mA Output Voltage, IO = 2A Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 125C 11.3V 50V 29V 35V 35V 35V 34.5V RL = 2.07 RL = 500 RL = 12 RL = 100, AV = 1, CL = 10nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 24.5V 6.3 45 24 2.5 92 80 2.5 90 80 1.25 92 80 .86 1 10 1 10 1 10 V V V A mV V/s dB dB V V V mV V/s dB dB V V V mV V/s dB dB 100K BURN IN CIRCUIT +15V 100K 5 * ** 3 2 1 U.U.T * 4 8 20 6 -15V * These components are used to stabilize device due to poor high frequency characteristics of burn in board. ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. 1 1 This data sheet has been carefully CORPORATION checked and is believed to be reliable,(520) however, no responsibility assumed for possible*inaccuracies or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY * TELEPHONE 690-8600 * FAXis(520) 888-3329 ORDERS (520) 690-8601 * EMAILare prodlit@apexmicrotech.com PA07MU REV. G FEBRUARY 2001 (c) 2001 Apex Microtechnology Corp.