MASW-009444 GaAs SP2T 1.8 V Switch DC - 6.0 GHz Rev. V1 Features Functional Diagram Voltage Operation as low as 1.6 V Insertion Loss: 0.20 dB @ 1 GHz Lead-Free 1 mm 6-Lead PDFN Package RoHS* Compliant and 260C Reflow Compatible V1 RFC GND N/C V2 N/C RF1 RF2 Description M/A-COM's MASW-009444 is a GaAs PHEMT MMIC single pole two throw (SP2T) switch in a miniature 1x1mm 6-lead PDFN package. The MASW-009444 is ideally suited for applications where low control voltage, low insertion loss, moderate isolation, and small size are required. Typical applications are for filter and antenna switching in handset systems that connect separate receive functions to a common antenna, as well as other related handset and general purpose applications. This part can be used in all systems operating up to 6 GHz requiring high power at low control voltage. Pin Configuration Pin No. Function Description 1 V1 Control 1 2 GND Ground 3 RF1 RF Port 1 4 RF2 RF Port 2 5 V2 Control 2 6 RFC RF Common The MASW-009444 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information 1,2 Absolute Maximum Ratings 3,4 Part Number Package Parameter Absolute Maximum MASW-009444-TR3000 3000 piece reel Max Input Power (0.5 - 3 GHz, 2.7V Control) +27 dBm MASW-009444-001SMB Sample Board Operating Voltage +8.5 volts Operating Temperature -40C to +85C Storage Temperature -65C to +150C 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-009444 GaAs SP2T 1.8 V Switch DC - 6.0 GHz Rev. V1 Electrical Specifications:5 TA = 25C, VC = 1.8 V, Z0 = 50 Parameter Test Conditions Units Min. Typ. Max. DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB -- -- -- 0.2 0.3 0.4 .45 -- -- Isolation DC - 1 GHz 1 - 2 GHz 2 - 3 GHz dB 22 -- -- 28 23 19 -- -- -- VSWR DC - 2.5 GHz 2.5 - 3 GHz dB -- -- <1.3 <1.3 -- -- IP3 Two Tone +10 dBm, 5 MHz Spacing, >50 MHz PIN = 0 dBm VC = 0/2.5 V dBm -- 47 -- P1dB VC = 1.8V VC = 2.7V dBm -- -- 15 24 -- -- Trise, Tfall 10% to 90% RF, 90% to 10% RF ns -- 10 -- Ton, Toff 50% control to 90% RF, and 50% control to 10% RF ns -- 15 -- Transients In Band mV -- 30 -- Control Current |VC| = 1.8V A -- 5 10 Insertion Loss 5. Insertion Loss can be optimized by varying the DC Blocking Capacitor value, i.e. 1000 pF for 100 - 500 MHz, 39 pF for 0.5 - 3.0 GHz Handling Procedures Truth Table 6 Please observe the following precautions to avoid damage: V1 V2 RFC - RF1 RFC - RF2 0V +1.8 to 5 V On Off Static Sensitivity +1.8 to 5 V 0V Off On Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 6. External DC blocking capacitors are required on all RF ports 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-009444 GaAs SP2T 1.8 V Switch DC - 6.0 GHz Rev. V1 Typical Performance Curves Isolation Insertion Loss 0.0 0 -5 -10 -0.5 -15 -20 +25C -40C +85C -1.0 -25 +25C -40C +85C -30 -35 -40 -1.5 0 1 2 3 4 5 0 6 1 2 3 4 5 6 5 6 Frequency (GHz) Frequency (GHz) Input Return Loss Output Return Loss 0 0 -5 -5 +25C -40C +85C -10 +25C -40C +85C -10 -15 -20 -15 -25 -20 -30 -25 -35 -40 -30 0 1 2 3 4 5 6 Frequency (GHz) 0 1 2 3 4 Frequency (GHz) Input P1dB vs. Control Voltage 25 20 15 +25C -40C +85C 10 5 0 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 Control Voltage (V) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-009444 GaAs SP2T 1.8 V Switch DC - 6.0 GHz Rev. V1 Lead-Free 1 mm 6-Lead PDFN Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-009444 GaAs SP2T 1.8 V Switch DC - 6.0 GHz Rev. V1 M/A-COM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support