1
PNA4611M Series
(PNA4611M/4612M/4613M/4614M/4620M)
Bipolar Integrated Circuit with Photodetection Function
For infrared remote control systems
Absolute Maximum Ratings (Ta = 25˚C)
Parameter Symbol Ratings Unit
Power supply voltage VCC – 0.5 to +7 V
Power dissipation PD200 mW
Operating ambient temperature
Topr –20 to +75 ˚C
Storage temperature Tstg – 40 to +100 ˚C
Photo IC
Main Characteristics (Ta = 25˚C VCC = 5V)
Parameter Symbol Conditions min typ max Unit
Operating supply voltage VCC 4.7 5.0 5.3 V
Current consumption ICC Note 3 1.8 2.4 3.0 mA
Maximum reception distance
Lmax Note 1 11 16 m
Low-level output voltage VOL Note 2 0.35 0.5 V
High-level output voltage VOH Note 3 4.8 5.0 VCC V
Low-level pulse width TWL Note 1 200 400 600 µs
High-level pulse width TWH Note 1 200 400 600 µs
PNA4611M 36.7
PNA4612M 38.0
Carrier frequency
PNA4613M f040.0 kHz
PNA4614M 56.9
PNA4620M 33.3
Note 1) Fig.1 burst wave, L=Lmax, 16 pulses
Note 2) Fig.2 continuous wave, L ≤ Lmax
Note 3) Light shut off condition
400µs400µs
Carrier wave : f
0
Carrier wave : f
0
Fig.2Fig.1
Features
High sensitivity (extension distance is 11 m or more)
External parts not required
Resin to cutoff visible light is used
Supports various metal holders with improved electromagnetic
noise resistance
5˚
5˚
5˚
5˚
7.0±0.2
3.5
5.25±0.3
2.25
R2.25±0.1
3-1.5±0.2
3-0.5
2-2.54
123
Not soldered 1.5
1: V
OUT
2: GND
3: V
CC
Unit : mm
8.0±0.2
5.2
2.3
22.0 min.
0.8
+0.2
–0.15
2.0±0.1
1.0±0.1
0.45±0.2
2
Photo IC PNA4611M, PNA4612M, PNA4613M, PNA4614M, PNA4620M
1: V
O
2: GND
3: V
CC
Type XB
Unit : mm
1: V
O
2: GND
3: V
CC
Note :Tolerance unless otherwise specified is ±0.5.
Type XD
Unit : mm
1: V
O
2: GND
3: V
CC
Type YA
Unit : mm
1: V
O
2: GND
3: V
CC
Type YB
Unit : mm
1: V
O
2: GND
3: V
CC
Type HB
Unit : mm
7.6
3-ø0.9
16
(13.75)2.25
2-2.54
2.5
0.8
2-1.4
(11.3)
(9.6)
3.7±0.6
3-0.5
7.3
+0.25
–0.15
+0.25
–0.15
123
123
123
2-2.54
6.5 6.5
8.75
10.45
3.1
8.5
(9.7)
1.6
2.4
3.6
0.6
2-3.75
2-1.7×1.2
7.6
3.8 10.35
(8.1)
(7.4)
9.6
12.712.74.9
3.5
0.45
3-0.5
1.0
+0.25
–0.15
2-2.54
2.0
1.2
7.7
5.4
1.2
3-0.5
4.42.0±0.1
+0.25
–0.15
123
2-2.54
(3.15)
8.7
(6.9)
0.93
1.3
1.6
2.9
0.9
7.6 11.4
5.52.25
1.5
(5.9)
4.4
3.6
7.0
2-2.54
(3.6)
3.1
8.5
(6.9)
1.6
2.4
3.6
1.0
(11.9)
9.97 2.9
3.2
2-2.0±0.1
(9.83) 6.4
2.1
3.7±0.6
+0.25
–0.15
0.45
Recommendation hole location of P.C.board
3-ø0.9
2-2.54
5.55
1.45
10.08
8.8
4.85
0.45
Recommendation hole location of P.C.board
2-2.54
Recommendation hole location of P.C.board
3-ø0.9
2-2.54
4.0
7.6
2-2.4×1.4
Recommendation hole location of P.C.board Recommendation hole location of P.C.board
3-ø0.8
5.5
7.6
2-2.4×1.4
2-2.2×1.2
0.8×2.2
2.0
4.0
(4.0)(2.1)
0.45
+0.25
–0.15
R1.0
R1.0
7.6 15.7
13.452.25
2.25
21.43.5
1.2
2.0 18.3
12.9 8.5
3-0.5±0.2
2.0
7.0
(5.5)2.35
0.45±0.2
1.0
2-2.54
(6.8)
7.4
5
2-2.54
3-ø0.9
5.9
7.8 2-1.8×1.2
123
3
PNA4611M, PNA4612M, PNA4613M, PNA4614M, PNA4620M Photo IC
,,
,
V
O
GND
PD
AGC
V
CC
peak hold
constant voltage
comparator
R
L
(20kΩ)
integrator
B.P.F demodulatoramplifier
,
,
,,
Standard reception unit
LED Transmission unit
GND
10V
PNZ323B
20cm
10kΩ
10kΩ
10kΩ
10µF
V out
V out 55mV
Block Diagram
Panasonic Transmitter Specifications
The light output of the LED transmission unit is adjusted so that the transmission output (V out) of the standard
reception unit will be 55 mV when the transmission waveform (duty = 50%) is output from the LED transmis-
sion unit. Here, infrared sensitivity (SIR) of PNZ323B is 0.53 µA when emission illuminance (H) is 12.45 µW/
cm2.
The maximum reception distance under these specifications is an assurance that TWH and TWL values will be
within the tolerance ranges when 16 consecutive pulses of an optical output equivalent to the maximum recep-
tion distance are transmitted by the above transmission unit (The maximum reception distance is measured in
the dark without external disturbance noise.)
4
Photo IC PNA4611M, PNA4612M, PNA4613M, PNA4614M, PNA4620M
0˚ 10˚ 20˚
30˚
40˚
50˚
60˚
70˚
80˚
90˚
Directivity characteristics
Spectral sensitivity characteristics
100
80
60
40
20
Wavelength λ (nm)
Relative sensitivity S (%)
700 800 900 1000 1100 1200
0
600
B.P.F
frequency characteristics
(PNA4612M)
*
100
80
60
40
20
Carrier frequency (kHz)
Relative sensitivity S (%)
35 37 39 41 43
033
V
CC
= 5V
Transmitter : Standard LED
Transmission unit used
L max
— Ta
120
80
40
100
60
20
Ambient temperature Ta (˚C )
Relative reception distance L max (%)
020 608040 100
0
– 20
*
The peaks for PNA4611M, PNA4613M,
PNA4614M, and PNA4620M are all at f
0
.
20
90
100
80
70
60
50
40
30
Relative reception distance (%)
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may ap-
pear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Govern-
ment if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative character-
istics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or gen-
eral electronic equipment (such as office equipment, communications equipment, measuring in-
struments and household appliances).
Consult our sales staff in advance for information on the following applications:
•Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
•Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchas-
ing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maxi-
mum rating, the range of operating power supply voltage and heat radiation characteristics. Other-
wise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
2001 MAR
